internal/telephony/Phone.java

/*
 * Copyright (C) 2007 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.android.internal.telephony;

import android.content.Context;
import android.content.SharedPreferences;
import android.os.Handler;
import android.os.Message;
import android.preference.PreferenceManager;
import android.telephony.CellLocation;
import android.telephony.PhoneStateListener;
import android.telephony.ServiceState;
import android.telephony.SignalStrength;

import com.android.internal.telephony.DataConnection;
import com.android.internal.telephony.gsm.NetworkInfo;
import com.android.internal.telephony.gsm.GsmDataConnection;
import com.android.internal.telephony.test.SimulatedRadioControl;

import java.util.List;

/**
 * Internal interface used to control the phone; SDK developers cannot
 * obtain this interface.
 *
 * {@hide}
 *
 */
public interface Phone {

    /** used to enable additional debug messages */
    static final boolean DEBUG_PHONE = true;


    /**
     * The phone state. One of the following:<p>
     * <ul>
     * <li>IDLE = no phone activity</li>
     * <li>RINGING = a phone call is ringing or call waiting.
     *  In the latter case, another call is active as well</li>
     * <li>OFFHOOK = The phone is off hook. At least one call
     * exists that is dialing, active or holding and no calls are
     * ringing or waiting.</li>
     * </ul>
     */
    enum State {
        IDLE, RINGING, OFFHOOK;
    };

    /**
     * The state of a data connection.
     * <ul>
     * <li>CONNECTED = IP traffic should be available</li>
     * <li>CONNECTING = Currently setting up data connection</li>
     * <li>DISCONNECTED = IP not available</li>
     * <li>SUSPENDED = connection is created but IP traffic is
     *                 temperately not available. i.e. voice call is in place
     *                 in 2G network</li>
     * </ul>
     */
    enum DataState {
        CONNECTED, CONNECTING, DISCONNECTED, SUSPENDED;
    };

    public enum DataActivityState {
        /**
         * The state of a data activity.
         * <ul>
         * <li>NONE = No traffic</li>
         * <li>DATAIN = Receiving IP ppp traffic</li>
         * <li>DATAOUT = Sending IP ppp traffic</li>
         * <li>DATAINANDOUT = Both receiving and sending IP ppp traffic</li>
         * <li>DORMANT = The data connection is still active,
                                     but physical link is down</li>
         * </ul>
         */
        NONE, DATAIN, DATAOUT, DATAINANDOUT, DORMANT;
    };

    enum SuppService {
      UNKNOWN, SWITCH, SEPARATE, TRANSFER, CONFERENCE, REJECT, HANGUP;
    };

    static final String STATE_KEY = "state";
    static final String PHONE_NAME_KEY = "phoneName";
    static final String FAILURE_REASON_KEY = "reason";
    static final String STATE_CHANGE_REASON_KEY = "reason";
    static final String DATA_APN_TYPES_KEY = "apnType";
    static final String DATA_APN_KEY = "apn";

    static final String DATA_IFACE_NAME_KEY = "iface";
    static final String NETWORK_UNAVAILABLE_KEY = "networkUnvailable";
    static final String PHONE_IN_ECM_STATE = "phoneinECMState";

    /**
     * APN types for data connections.  These are usage categories for an APN
     * entry.  One APN entry may support multiple APN types, eg, a single APN
     * may service regular internet traffic ("default") as well as MMS-specific
     * connections.<br/>
     * APN_TYPE_ALL is a special type to indicate that this APN entry can
     * service all data connections.
     */
    static final String APN_TYPE_ALL = "*";
    /** APN type for default data traffic */
    static final String APN_TYPE_DEFAULT = "default";
    /** APN type for MMS traffic */
    static final String APN_TYPE_MMS = "mms";
    /** APN type for SUPL assisted GPS */
    static final String APN_TYPE_SUPL = "supl";
    /** APN type for DUN traffic */
    static final String APN_TYPE_DUN = "dun";
    /** APN type for HiPri traffic */
    static final String APN_TYPE_HIPRI = "hipri";

    // "Features" accessible through the connectivity manager
    static final String FEATURE_ENABLE_MMS = "enableMMS";
    static final String FEATURE_ENABLE_SUPL = "enableSUPL";
    static final String FEATURE_ENABLE_DUN = "enableDUN";
    static final String FEATURE_ENABLE_HIPRI = "enableHIPRI";

    /**
     * Return codes for <code>enableApnType()</code>
     */
    static final int APN_ALREADY_ACTIVE     = 0;
    static final int APN_REQUEST_STARTED    = 1;
    static final int APN_TYPE_NOT_AVAILABLE = 2;
    static final int APN_REQUEST_FAILED     = 3;


    /**
     * Optional reasons for disconnect and connect
     */
    static final String REASON_ROAMING_ON = "roamingOn";
    static final String REASON_ROAMING_OFF = "roamingOff";
    static final String REASON_DATA_DISABLED = "dataDisabled";
    static final String REASON_DATA_ENABLED = "dataEnabled";
    static final String REASON_GPRS_ATTACHED = "gprsAttached";
    static final String REASON_GPRS_DETACHED = "gprsDetached";
    static final String REASON_CDMA_DATA_ATTACHED = "cdmaDataAttached";
    static final String REASON_CDMA_DATA_DETACHED = "cdmaDataDetached";
    static final String REASON_APN_CHANGED = "apnChanged";
    static final String REASON_APN_SWITCHED = "apnSwitched";
    static final String REASON_APN_FAILED = "apnFailed";
    static final String REASON_RESTORE_DEFAULT_APN = "restoreDefaultApn";
    static final String REASON_RADIO_TURNED_OFF = "radioTurnedOff";
    static final String REASON_PDP_RESET = "pdpReset";
    static final String REASON_VOICE_CALL_ENDED = "2GVoiceCallEnded";
    static final String REASON_VOICE_CALL_STARTED = "2GVoiceCallStarted";
    static final String REASON_PS_RESTRICT_ENABLED = "psRestrictEnabled";
    static final String REASON_PS_RESTRICT_DISABLED = "psRestrictDisabled";
    static final String REASON_SIM_LOADED = "simLoaded";

    // Used for band mode selection methods
    static final int BM_UNSPECIFIED = 0; // selected by baseband automatically
    static final int BM_EURO_BAND   = 1; // GSM-900 / DCS-1800 / WCDMA-IMT-2000
    static final int BM_US_BAND     = 2; // GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900
    static final int BM_JPN_BAND    = 3; // WCDMA-800 / WCDMA-IMT-2000
    static final int BM_AUS_BAND    = 4; // GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000
    static final int BM_AUS2_BAND   = 5; // GSM-900 / DCS-1800 / WCDMA-850
    static final int BM_BOUNDARY    = 6; // upper band boundary

    // Radio Type
    static final int PHONE_TYPE_NONE = RILConstants.NO_PHONE;
    static final int PHONE_TYPE_GSM = RILConstants.GSM_PHONE;
    static final int PHONE_TYPE_CDMA = RILConstants.CDMA_PHONE;

    // Used for preferred network type
    // Note NT_* substitute RILConstants.NETWORK_MODE_* above the Phone
    int NT_MODE_WCDMA_PREF   = RILConstants.NETWORK_MODE_WCDMA_PREF;
    int NT_MODE_GSM_ONLY     = RILConstants.NETWORK_MODE_GSM_ONLY;
    int NT_MODE_WCDMA_ONLY   = RILConstants.NETWORK_MODE_WCDMA_ONLY;
    int NT_MODE_GSM_UMTS     = RILConstants.NETWORK_MODE_GSM_UMTS;

    int NT_MODE_CDMA         = RILConstants.NETWORK_MODE_CDMA;

    int NT_MODE_CDMA_NO_EVDO = RILConstants.NETWORK_MODE_CDMA_NO_EVDO;
    int NT_MODE_EVDO_NO_CDMA = RILConstants.NETWORK_MODE_EVDO_NO_CDMA;
    int NT_MODE_GLOBAL       = RILConstants.NETWORK_MODE_GLOBAL;

    int PREFERRED_NT_MODE    = RILConstants.PREFERRED_NETWORK_MODE;


    // Used for CDMA roaming mode
    static final int CDMA_RM_HOME        = 0;  // Home Networks only, as defined in PRL
    static final int CDMA_RM_AFFILIATED  = 1;  // Roaming an Affiliated networks, as defined in PRL
    static final int CDMA_RM_ANY         = 2;  // Roaming on Any Network, as defined in PRL

    // Used for CDMA subscription mode
    static final int CDMA_SUBSCRIPTION_RUIM_SIM = 0; // RUIM/SIM (default)
    static final int CDMA_SUBSCRIPTION_NV       = 1; // NV -> non-volatile memory

    static final int PREFERRED_CDMA_SUBSCRIPTION = CDMA_SUBSCRIPTION_NV;

    static final int TTY_MODE_OFF = 0;
    static final int TTY_MODE_FULL = 1;
    static final int TTY_MODE_HCO = 2;
    static final int TTY_MODE_VCO = 3;

     /**
     * CDMA OTA PROVISION STATUS, the same as RIL_CDMA_OTA_Status in ril.h
     */

    public static final int CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED = 0;
    public static final int CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED = 1;
    public static final int CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED = 2;
    public static final int CDMA_OTA_PROVISION_STATUS_SSD_UPDATED = 3;
    public static final int CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED = 4;
    public static final int CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED = 5;
    public static final int CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED = 6;
    public static final int CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED = 7;
    public static final int CDMA_OTA_PROVISION_STATUS_COMMITTED = 8;
    public static final int CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED = 9;
    public static final int CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED = 10;
    public static final int CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED = 11;


    /**
     * Get the current ServiceState. Use
     * <code>registerForServiceStateChanged</code> to be informed of
     * updates.
     */
    ServiceState getServiceState();

    /**
     * Get the current CellLocation.
     */
    CellLocation getCellLocation();

    /**
     * Get the current DataState. No change notification exists at this
     * interface -- use
     * {@link com.android.telephony.PhoneStateListener PhoneStateListener}
     * instead.
     */
    DataState getDataConnectionState();

    /**
     * Get the current DataActivityState. No change notification exists at this
     * interface -- use
     * {@link TelephonyManager} instead.
     */
    DataActivityState getDataActivityState();

    /**
     * Gets the context for the phone, as set at initialization time.
     */
    Context getContext();

    /**
     * Disables the DNS check (i.e., allows "0.0.0.0").
     * Useful for lab testing environment.
     * @param b true disables the check, false enables.
     */
    void disableDnsCheck(boolean b);

    /**
     * Returns true if the DNS check is currently disabled.
     */
    boolean isDnsCheckDisabled();

    /**
     * Get current coarse-grained voice call state.
     * Use {@link #registerForPreciseCallStateChanged(Handler, int, Object)
     * registerForPreciseCallStateChanged()} for change notification. <p>
     * If the phone has an active call and call waiting occurs,
     * then the phone state is RINGING not OFFHOOK
     * <strong>Note:</strong>
     * This registration point provides notification of finer-grained
     * changes.<p>
     *
     */
    State getState();

    /**
     * Returns a string identifier for this phone interface for parties
     *  outside the phone app process.
     *  @return The string name.
     */
    String getPhoneName();

    /**
     * Return a numerical identifier for the phone radio interface.
     * @return PHONE_TYPE_XXX as defined above.
     */
    int getPhoneType();

    /**
     * Returns an array of string identifiers for the APN types serviced by the
     * currently active or last connected APN.
     *  @return The string array.
     */
    String[] getActiveApnTypes();

    /**
     * Returns a string identifier for currently active or last connected APN.
     *  @return The string name.
     */
    String getActiveApn();

    /**
     * Get current signal strength. No change notification available on this
     * interface. Use <code>PhoneStateNotifier</code> or an equivalent.
     * An ASU is 0-31 or -1 if unknown (for GSM, dBm = -113 - 2 * asu).
     * The following special values are defined:</p>
     * <ul><li>0 means "-113 dBm or less".</li>
     * <li>31 means "-51 dBm or greater".</li></ul>
     *
     * @return Current signal strength as SignalStrength
     */
    SignalStrength getSignalStrength();

    /**
     * Notifies when a previously untracked non-ringing/waiting connection has appeared.
     * This is likely due to some other entity (eg, SIM card application) initiating a call.
     */
    void registerForUnknownConnection(Handler h, int what, Object obj);

    /**
     * Unregisters for unknown connection notifications.
     */
    void unregisterForUnknownConnection(Handler h);

    /**
     * Register for getting notifications for change in the Call State {@link Call.State}
     * This is called PreciseCallState because the call state is more precise than the
     * {@link Phone.State} which can be obtained using the {@link PhoneStateListener}
     *
     * Resulting events will have an AsyncResult in <code>Message.obj</code>.
     * AsyncResult.userData will be set to the obj argument here.
     * The <em>h</em> parameter is held only by a weak reference.
     */
    void registerForPreciseCallStateChanged(Handler h, int what, Object obj);

    /**
     * Unregisters for voice call state change notifications.
     * Extraneous calls are tolerated silently.
     */
    void unregisterForPreciseCallStateChanged(Handler h);


    /**
     * Notifies when a new ringing or waiting connection has appeared.<p>
     *
     *  Messages received from this:
     *  Message.obj will be an AsyncResult
     *  AsyncResult.userObj = obj
     *  AsyncResult.result = a Connection. <p>
     *  Please check Connection.isRinging() to make sure the Connection
     *  has not dropped since this message was posted.
     *  If Connection.isRinging() is true, then
     *   Connection.getCall() == Phone.getRingingCall()
     */
    void registerForNewRingingConnection(Handler h, int what, Object obj);

    /**
     * Unregisters for new ringing connection notification.
     * Extraneous calls are tolerated silently
     */

    void unregisterForNewRingingConnection(Handler h);

    /**
     * Notifies when an incoming call rings.<p>
     *
     *  Messages received from this:
     *  Message.obj will be an AsyncResult
     *  AsyncResult.userObj = obj
     *  AsyncResult.result = a Connection. <p>
     */
    void registerForIncomingRing(Handler h, int what, Object obj);

    /**
     * Unregisters for ring notification.
     * Extraneous calls are tolerated silently
     */

    void unregisterForIncomingRing(Handler h);

    /**
     * Notifies when out-band ringback tone is needed.<p>
     *
     *  Messages received from this:
     *  Message.obj will be an AsyncResult
     *  AsyncResult.userObj = obj
     *  AsyncResult.result = boolean, true to start play ringback tone
     *                       and false to stop. <p>
     */
    void registerForRingbackTone(Handler h, int what, Object obj);

    /**
     * Unregisters for ringback tone notification.
     */

    void unregisterForRingbackTone(Handler h);

    /**
     * Registers the handler to reset the uplink mute state to get
     * uplink audio.
     */
    void registerForResendIncallMute(Handler h, int what, Object obj);

    /**
     * Unregisters for resend incall mute notifications.
     */
    void unregisterForResendIncallMute(Handler h);

    /**
     * Notifies when a voice connection has disconnected, either due to local
     * or remote hangup or error.
     *
     *  Messages received from this will have the following members:<p>
     *  <ul><li>Message.obj will be an AsyncResult</li>
     *  <li>AsyncResult.userObj = obj</li>
     *  <li>AsyncResult.result = a Connection object that is
     *  no longer connected.</li></ul>
     */
    void registerForDisconnect(Handler h, int what, Object obj);

    /**
     * Unregisters for voice disconnection notification.
     * Extraneous calls are tolerated silently
     */
    void unregisterForDisconnect(Handler h);


    /**
     * Register for notifications of initiation of a new MMI code request.
     * MMI codes for GSM are discussed in 3GPP TS 22.030.<p>
     *
     * Example: If Phone.dial is called with "*#31#", then the app will
     * be notified here.<p>
     *
     * The returned <code>Message.obj</code> will contain an AsyncResult.
     *
     * <code>obj.result</code> will be an "MmiCode" object.
     */
    void registerForMmiInitiate(Handler h, int what, Object obj);

    /**
     * Unregisters for new MMI initiate notification.
     * Extraneous calls are tolerated silently
     */
    void unregisterForMmiInitiate(Handler h);

    /**
     * Register for notifications that an MMI request has completed
     * its network activity and is in its final state. This may mean a state
     * of COMPLETE, FAILED, or CANCELLED.
     *
     * <code>Message.obj</code> will contain an AsyncResult.
     * <code>obj.result</code> will be an "MmiCode" object
     */
    void registerForMmiComplete(Handler h, int what, Object obj);

    /**
     * Unregisters for MMI complete notification.
     * Extraneous calls are tolerated silently
     */
    void unregisterForMmiComplete(Handler h);

    /**
     * Registration point for Ecm timer reset
     * @param h handler to notify
     * @param what user-defined message code
     * @param obj placed in Message.obj
     */
    public void registerForEcmTimerReset(Handler h, int what, Object obj);

    /**
     * Unregister for notification for Ecm timer reset
     * @param h Handler to be removed from the registrant list.
     */
    public void unregisterForEcmTimerReset(Handler h);

    /**
     * Returns a list of MMI codes that are pending. (They have initiated
     * but have not yet completed).
     * Presently there is only ever one.
     * Use <code>registerForMmiInitiate</code>
     * and <code>registerForMmiComplete</code> for change notification.
     */
    public List<? extends MmiCode> getPendingMmiCodes();

    /**
     * Sends user response to a USSD REQUEST message.  An MmiCode instance
     * representing this response is sent to handlers registered with
     * registerForMmiInitiate.
     *
     * @param ussdMessge    Message to send in the response.
     */
    public void sendUssdResponse(String ussdMessge);

    /**
     * Register for ServiceState changed.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a ServiceState instance
     */
    void registerForServiceStateChanged(Handler h, int what, Object obj);

    /**
     * Unregisters for ServiceStateChange notification.
     * Extraneous calls are tolerated silently
     */
    void unregisterForServiceStateChanged(Handler h);

    /**
     * Register for Supplementary Service notifications from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a SuppServiceNotification instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForSuppServiceNotification(Handler h, int what, Object obj);

    /**
     * Unregisters for Supplementary Service notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForSuppServiceNotification(Handler h);

    /**
     * Register for notifications when a supplementary service attempt fails.
     * Message.obj will contain an AsyncResult.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForSuppServiceFailed(Handler h, int what, Object obj);

    /**
     * Unregister for notifications when a supplementary service attempt fails.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForSuppServiceFailed(Handler h);

    /**
     * Register for notifications when a sInCall VoicePrivacy is enabled
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForInCallVoicePrivacyOn(Handler h, int what, Object obj);

    /**
     * Unegister for notifications when a sInCall VoicePrivacy is enabled
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForInCallVoicePrivacyOn(Handler h);

    /**
     * Register for notifications when a sInCall VoicePrivacy is disabled
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForInCallVoicePrivacyOff(Handler h, int what, Object obj);

    /**
     * Unegister for notifications when a sInCall VoicePrivacy is disabled
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForInCallVoicePrivacyOff(Handler h);

    /**
     * Register for notifications when CDMA OTA Provision status change
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForCdmaOtaStatusChange(Handler h, int what, Object obj);

    /**
     * Unegister for notifications when CDMA OTA Provision status change
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForCdmaOtaStatusChange(Handler h);

    /**
     * Registration point for subscription info ready
     * @param h handler to notify
     * @param what what code of message when delivered
     * @param obj placed in Message.obj
     */
    public void registerForSubscriptionInfoReady(Handler h, int what, Object obj);

    /**
     * Unregister for notifications for subscription info
     * @param h Handler to be removed from the registrant list.
     */
    public void unregisterForSubscriptionInfoReady(Handler h);

    /**
     * Returns SIM record load state. Use
     * <code>getSimCard().registerForReady()</code> for change notification.
     *
     * @return true if records from the SIM have been loaded and are
     * available (if applicable). If not applicable to the underlying
     * technology, returns true as well.
     */
    boolean getIccRecordsLoaded();

    /**
     * Returns the ICC card interface for this phone, or null
     * if not applicable to underlying technology.
     */
    IccCard getIccCard();

    /**
     * Answers a ringing or waiting call. Active calls, if any, go on hold.
     * Answering occurs asynchronously, and final notification occurs via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     *
     * @exception CallStateException when no call is ringing or waiting
     */
    void acceptCall() throws CallStateException;

    /**
     * Reject (ignore) a ringing call. In GSM, this means UDUB
     * (User Determined User Busy). Reject occurs asynchronously,
     * and final notification occurs via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     *
     * @exception CallStateException when no call is ringing or waiting
     */
    void rejectCall() throws CallStateException;

    /**
     * Places any active calls on hold, and makes any held calls
     *  active. Switch occurs asynchronously and may fail.
     * Final notification occurs via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     *
     * @exception CallStateException if a call is ringing, waiting, or
     * dialing/alerting. In these cases, this operation may not be performed.
     */
    void switchHoldingAndActive() throws CallStateException;

    /**
     * Whether or not the phone can conference in the current phone
     * state--that is, one call holding and one call active.
     * @return true if the phone can conference; false otherwise.
     */
    boolean canConference();

    /**
     * Conferences holding and active. Conference occurs asynchronously
     * and may fail. Final notification occurs via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     *
     * @exception CallStateException if canConference() would return false.
     * In these cases, this operation may not be performed.
     */
    void conference() throws CallStateException;

    /**
     * Enable or disable enhanced Voice Privacy (VP). If enhanced VP is
     * disabled, normal VP is enabled.
     *
     * @param enable whether true or false to enable or disable.
     * @param onComplete a callback message when the action is completed.
     */
    void enableEnhancedVoicePrivacy(boolean enable, Message onComplete);

    /**
     * Get the currently set Voice Privacy (VP) mode.
     *
     * @param onComplete a callback message when the action is completed.
     */
    void getEnhancedVoicePrivacy(Message onComplete);

    /**
     * Whether or not the phone can do explicit call transfer in the current
     * phone state--that is, one call holding and one call active.
     * @return true if the phone can do explicit call transfer; false otherwise.
     */
    boolean canTransfer();

    /**
     * Connects the two calls and disconnects the subscriber from both calls
     * Explicit Call Transfer occurs asynchronously
     * and may fail. Final notification occurs via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     *
     * @exception CallStateException if canTransfer() would return false.
     * In these cases, this operation may not be performed.
     */
    void explicitCallTransfer() throws CallStateException;

    /**
     * Clears all DISCONNECTED connections from Call connection lists.
     * Calls that were in the DISCONNECTED state become idle. This occurs
     * synchronously.
     */
    void clearDisconnected();


    /**
     * Gets the foreground call object, which represents all connections that
     * are dialing or active (all connections
     * that have their audio path connected).<p>
     *
     * The foreground call is a singleton object. It is constant for the life
     * of this phone. It is never null.<p>
     *
     * The foreground call will only ever be in one of these states:
     * IDLE, ACTIVE, DIALING, ALERTING, or DISCONNECTED.
     *
     * State change notification is available via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     */
    Call getForegroundCall();

    /**
     * Gets the background call object, which represents all connections that
     * are holding (all connections that have been accepted or connected, but
     * do not have their audio path connected). <p>
     *
     * The background call is a singleton object. It is constant for the life
     * of this phone object . It is never null.<p>
     *
     * The background call will only ever be in one of these states:
     * IDLE, HOLDING or DISCONNECTED.
     *
     * State change notification is available via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     */
    Call getBackgroundCall();

    /**
     * Gets the ringing call object, which represents an incoming
     * connection (if present) that is pending answer/accept. (This connection
     * may be RINGING or WAITING, and there may be only one.)<p>

     * The ringing call is a singleton object. It is constant for the life
     * of this phone. It is never null.<p>
     *
     * The ringing call will only ever be in one of these states:
     * IDLE, INCOMING, WAITING or DISCONNECTED.
     *
     * State change notification is available via
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}.
     */
    Call getRingingCall();

    /**
     * Initiate a new voice connection. This happens asynchronously, so you
     * cannot assume the audio path is connected (or a call index has been
     * assigned) until PhoneStateChanged notification has occurred.
     *
     * @exception CallStateException if a new outgoing call is not currently
     * possible because no more call slots exist or a call exists that is
     * dialing, alerting, ringing, or waiting.  Other errors are
     * handled asynchronously.
     */
    Connection dial(String dialString) throws CallStateException;

    /**
     * Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated
     * without SEND (so <code>dial</code> is not appropriate).
     *
     * @param dialString the MMI command to be executed.
     * @return true if MMI command is executed.
     */
    boolean handlePinMmi(String dialString);

    /**
     * Handles in-call MMI commands. While in a call, or while receiving a
     * call, use this to execute MMI commands.
     * see 3GPP 20.030, section 6.5.5.1 for specs on the allowed MMI commands.
     *
     * @param command the MMI command to be executed.
     * @return true if the MMI command is executed.
     * @throws CallStateException
     */
    boolean handleInCallMmiCommands(String command) throws CallStateException;

    /**
     * Play a DTMF tone on the active call. Ignored if there is no active call.
     * @param c should be one of 0-9, '*' or '#'. Other values will be
     * silently ignored.
     */
    void sendDtmf(char c);

    /**
     * Start to paly a DTMF tone on the active call. Ignored if there is no active call
     * or there is a playing DTMF tone.
     * @param c should be one of 0-9, '*' or '#'. Other values will be
     * silently ignored.
     */
    void startDtmf(char c);

    /**
     * Stop the playing DTMF tone. Ignored if there is no playing DTMF
     * tone or no active call.
     */
    void stopDtmf();

    /**
     * send burst DTMF tone, it can send the string as single character or multiple character
     * ignore if there is no active call or not valid digits string.
     * Valid digit means only includes characters ISO-LATIN characters 0-9, *, #
     * The difference between sendDtmf and sendBurstDtmf is sendDtmf only sends one character,
     * this api can send single character and multiple character, also, this api has response
     * back to caller.
     *
     * @param dtmfString is string representing the dialing digit(s) in the active call
     * @param on the DTMF ON length in milliseconds, or 0 for default
     * @param off the DTMF OFF length in milliseconds, or 0 for default
     * @param onCompelte is the callback message when the action is processed by BP
     *
     */
    void sendBurstDtmf(String dtmfString, int on, int off, Message onComplete);

    /**
     * Sets the radio power on/off state (off is sometimes
     * called "airplane mode"). Current state can be gotten via
     * {@link #getServiceState()}.{@link
     * android.telephony.ServiceState#getState() getState()}.
     * <strong>Note: </strong>This request is asynchronous.
     * getServiceState().getState() will not change immediately after this call.
     * registerForServiceStateChanged() to find out when the
     * request is complete.
     *
     * @param power true means "on", false means "off".
     */
    void setRadioPower(boolean power);

    /**
     * Get voice message waiting indicator status. No change notification
     * available on this interface. Use PhoneStateNotifier or similar instead.
     *
     * @return true if there is a voice message waiting
     */
    boolean getMessageWaitingIndicator();

    /**
     * Get voice call forwarding indicator status. No change notification
     * available on this interface. Use PhoneStateNotifier or similar instead.
     *
     * @return true if there is a voice call forwarding
     */
    boolean getCallForwardingIndicator();

    /**
     * Get the line 1 phone number (MSISDN).<p>
     *
     * @return phone number. May return null if not
     * available or the SIM is not ready
     */
    String getLine1Number();

    /**
     * Returns the alpha tag associated with the msisdn number.
     * If there is no alpha tag associated or the record is not yet available,
     * returns a default localized string. <p>
     */
    String getLine1AlphaTag();

    /**
     * Sets the MSISDN phone number in the SIM card.
     *
     * @param alphaTag the alpha tag associated with the MSISDN phone number
     *        (see getMsisdnAlphaTag)
     * @param number the new MSISDN phone number to be set on the SIM.
     * @param onComplete a callback message when the action is completed.
     */
    void setLine1Number(String alphaTag, String number, Message onComplete);

    /**
     * Get the voice mail access phone number. Typically dialed when the
     * user holds the "1" key in the phone app. May return null if not
     * available or the SIM is not ready.<p>
     */
    String getVoiceMailNumber();

    /**
     * Returns unread voicemail count. This count is shown when the  voicemail
     * notification is expanded.<p>
     */
    int getVoiceMessageCount();

    /**
     * Returns the alpha tag associated with the voice mail number.
     * If there is no alpha tag associated or the record is not yet available,
     * returns a default localized string. <p>
     *
     * Please use this value instead of some other localized string when
     * showing a name for this number in the UI. For example, call log
     * entries should show this alpha tag. <p>
     *
     * Usage of this alpha tag in the UI is a common carrier requirement.
     */
    String getVoiceMailAlphaTag();

    /**
     * setVoiceMailNumber
     * sets the voicemail number in the SIM card.
     *
     * @param alphaTag the alpha tag associated with the voice mail number
     *        (see getVoiceMailAlphaTag)
     * @param voiceMailNumber the new voicemail number to be set on the SIM.
     * @param onComplete a callback message when the action is completed.
     */
    void setVoiceMailNumber(String alphaTag,
                            String voiceMailNumber,
                            Message onComplete);

    /**
     * getCallForwardingOptions
     * gets a call forwarding option. The return value of
     * ((AsyncResult)onComplete.obj) is an array of CallForwardInfo.
     *
     * @param commandInterfaceCFReason is one of the valid call forwarding
     *        CF_REASONS, as defined in
     *        <code>com.android.internal.telephony.CommandsInterface.</code>
     * @param onComplete a callback message when the action is completed.
     *        @see com.android.internal.telephony.CallForwardInfo for details.
     */
    void getCallForwardingOption(int commandInterfaceCFReason,
                                  Message onComplete);

    /**
     * setCallForwardingOptions
     * sets a call forwarding option.
     *
     * @param commandInterfaceCFReason is one of the valid call forwarding
     *        CF_REASONS, as defined in
     *        <code>com.android.internal.telephony.CommandsInterface.</code>
     * @param commandInterfaceCFAction is one of the valid call forwarding
     *        CF_ACTIONS, as defined in
     *        <code>com.android.internal.telephony.CommandsInterface.</code>
     * @param dialingNumber is the target phone number to forward calls to
     * @param timerSeconds is used by CFNRy to indicate the timeout before
     *        forwarding is attempted.
     * @param onComplete a callback message when the action is completed.
     */
    void setCallForwardingOption(int commandInterfaceCFReason,
                                 int commandInterfaceCFAction,
                                 String dialingNumber,
                                 int timerSeconds,
                                 Message onComplete);

    /**
     * getOutgoingCallerIdDisplay
     * gets outgoing caller id display. The return value of
     * ((AsyncResult)onComplete.obj) is an array of int, with a length of 2.
     *
     * @param onComplete a callback message when the action is completed.
     *        @see com.android.internal.telephony.CommandsInterface.getCLIR for details.
     */
    void getOutgoingCallerIdDisplay(Message onComplete);

    /**
     * setOutgoingCallerIdDisplay
     * sets a call forwarding option.
     *
     * @param commandInterfaceCLIRMode is one of the valid call CLIR
     *        modes, as defined in
     *        <code>com.android.internal.telephony.CommandsInterface./code>
     * @param onComplete a callback message when the action is completed.
     */
    void setOutgoingCallerIdDisplay(int commandInterfaceCLIRMode,
                                    Message onComplete);

    /**
     * getCallWaiting
     * gets call waiting activation state. The return value of
     * ((AsyncResult)onComplete.obj) is an array of int, with a length of 1.
     *
     * @param onComplete a callback message when the action is completed.
     *        @see com.android.internal.telephony.CommandsInterface.queryCallWaiting for details.
     */
    void getCallWaiting(Message onComplete);

    /**
     * setCallWaiting
     * sets a call forwarding option.
     *
     * @param enable is a boolean representing the state that you are
     *        requesting, true for enabled, false for disabled.
     * @param onComplete a callback message when the action is completed.
     */
    void setCallWaiting(boolean enable, Message onComplete);

    /**
     * Scan available networks. This method is asynchronous; .
     * On completion, <code>response.obj</code> is set to an AsyncResult with
     * one of the following members:.<p>
     *<ul>
     * <li><code>response.obj.result</code> will be a <code>List</code> of
     * <code>com.android.internal.telephony.gsm.NetworkInfo</code> objects, or</li>
     * <li><code>response.obj.exception</code> will be set with an exception
     * on failure.</li>
     * </ul>
     */
    void getAvailableNetworks(Message response);

    /**
     * Switches network selection mode to "automatic", re-scanning and
     * re-selecting a network if appropriate.
     *
     * @param response The message to dispatch when the network selection
     * is complete.
     *
     * @see #selectNetworkManually(com.android.internal.telephony.gsm.NetworkInfo,
     * android.os.Message )
     */
    void setNetworkSelectionModeAutomatic(Message response);

    /**
     * Manually selects a network. <code>response</code> is
     * dispatched when this is complete.  <code>response.obj</code> will be
     * an AsyncResult, and <code>response.obj.exception</code> will be non-null
     * on failure.
     *
     * @see #setNetworkSelectionModeAutomatic(Message)
     */
    void selectNetworkManually(NetworkInfo network,
                            Message response);

    /**
     *  Requests to set the preferred network type for searching and registering
     * (CS/PS domain, RAT, and operation mode)
     * @param networkType one of  NT_*_TYPE
     * @param response is callback message
     */
    void setPreferredNetworkType(int networkType, Message response);

    /**
     *  Query the preferred network type setting
     *
     * @param response is callback message to report one of  NT_*_TYPE
     */
    void getPreferredNetworkType(Message response);

    /**
     * Gets the default SMSC address.
     *
     * @param result Callback message contains the SMSC address.
     */
    void getSmscAddress(Message result);

    /**
     * Sets the default SMSC address.
     *
     * @param address new SMSC address
     * @param result Callback message is empty on completion
     */
    void setSmscAddress(String address, Message result);

    /**
     * Query neighboring cell IDs.  <code>response</code> is dispatched when
     * this is complete.  <code>response.obj</code> will be an AsyncResult,
     * and <code>response.obj.exception</code> will be non-null on failure.
     * On success, <code>AsyncResult.result</code> will be a <code>String[]</code>
     * containing the neighboring cell IDs.  Index 0 will contain the count
     * of available cell IDs.  Cell IDs are in hexadecimal format.
     *
     * @param response callback message that is dispatched when the query
     * completes.
     */
    void getNeighboringCids(Message response);

    /**
     * Sets an event to be fired when the telephony system processes
     * a post-dial character on an outgoing call.<p>
     *
     * Messages of type <code>what</code> will be sent to <code>h</code>.
     * The <code>obj</code> field of these Message's will be instances of
     * <code>AsyncResult</code>. <code>Message.obj.result</code> will be
     * a Connection object.<p>
     *
     * Message.arg1 will be the post dial character being processed,
     * or 0 ('\0') if end of string.<p>
     *
     * If Connection.getPostDialState() == WAIT,
     * the application must call
     * {@link com.android.internal.telephony.Connection#proceedAfterWaitChar()
     * Connection.proceedAfterWaitChar()} or
     * {@link com.android.internal.telephony.Connection#cancelPostDial()
     * Connection.cancelPostDial()}
     * for the telephony system to continue playing the post-dial
     * DTMF sequence.<p>
     *
     * If Connection.getPostDialState() == WILD,
     * the application must call
     * {@link com.android.internal.telephony.Connection#proceedAfterWildChar
     * Connection.proceedAfterWildChar()}
     * or
     * {@link com.android.internal.telephony.Connection#cancelPostDial()
     * Connection.cancelPostDial()}
     * for the telephony system to continue playing the
     * post-dial DTMF sequence.<p>
     *
     * Only one post dial character handler may be set. <p>
     * Calling this method with "h" equal to null unsets this handler.<p>
     */
    void setOnPostDialCharacter(Handler h, int what, Object obj);


    /**
     * Mutes or unmutes the microphone for the active call. The microphone
     * is automatically unmuted if a call is answered, dialed, or resumed
     * from a holding state.
     *
     * @param muted true to mute the microphone,
     * false to activate the microphone.
     */

    void setMute(boolean muted);

    /**
     * Gets current mute status. Use
     * {@link #registerForPreciseCallStateChanged(android.os.Handler, int,
     * java.lang.Object) registerForPreciseCallStateChanged()}
     * as a change notifcation, although presently phone state changed is not
     * fired when setMute() is called.
     *
     * @return true is muting, false is unmuting
     */
    boolean getMute();

    /**
     * Invokes RIL_REQUEST_OEM_HOOK_RAW on RIL implementation.
     *
     * @param data The data for the request.
     * @param response <strong>On success</strong>,
     * (byte[])(((AsyncResult)response.obj).result)
     * <strong>On failure</strong>,
     * (((AsyncResult)response.obj).result) == null and
     * (((AsyncResult)response.obj).exception) being an instance of
     * com.android.internal.telephony.gsm.CommandException
     *
     * @see #invokeOemRilRequestRaw(byte[], android.os.Message)
     */
    void invokeOemRilRequestRaw(byte[] data, Message response);

    /**
     * Invokes RIL_REQUEST_OEM_HOOK_Strings on RIL implementation.
     *
     * @param strings The strings to make available as the request data.
     * @param response <strong>On success</strong>, "response" bytes is
     * made available as:
     * (String[])(((AsyncResult)response.obj).result).
     * <strong>On failure</strong>,
     * (((AsyncResult)response.obj).result) == null and
     * (((AsyncResult)response.obj).exception) being an instance of
     * com.android.internal.telephony.gsm.CommandException
     *
     * @see #invokeOemRilRequestStrings(java.lang.String[], android.os.Message)
     */
    void invokeOemRilRequestStrings(String[] strings, Message response);

    /**
     * Get the current active Data Call list
     *
     * @param response <strong>On success</strong>, "response" bytes is
     * made available as:
     * (String[])(((AsyncResult)response.obj).result).
     * <strong>On failure</strong>,
     * (((AsyncResult)response.obj).result) == null and
     * (((AsyncResult)response.obj).exception) being an instance of
     * com.android.internal.telephony.gsm.CommandException
     */
    void getDataCallList(Message response);

    /**
     * Get current mutiple data connection status
     *
     * @return list of data connections
     */
    List<DataConnection> getCurrentDataConnectionList();

    /**
     * Update the ServiceState CellLocation for current network registration.
     */
    void updateServiceLocation();

    /**
     * Enable location update notifications.
     */
    void enableLocationUpdates();

    /**
     * Disable location update notifications.
     */
    void disableLocationUpdates();

    /**
     * For unit tests; don't send notifications to "Phone"
     * mailbox registrants if true.
     */
    void setUnitTestMode(boolean f);

    /**
     * @return true If unit test mode is enabled
     */
    boolean getUnitTestMode();

    /**
     * Assign a specified band for RF configuration.
     *
     * @param bandMode one of BM_*_BAND
     * @param response is callback message
     */
    void setBandMode(int bandMode, Message response);

    /**
     * Query the list of band mode supported by RF.
     *
     * @param response is callback message
     *        ((AsyncResult)response.obj).result  is an int[] with every
     *        element representing one avialable BM_*_BAND
     */
    void queryAvailableBandMode(Message response);

    /**
     * @return true if enable data connection on roaming
     */
    boolean getDataRoamingEnabled();

    /**
     * @param enable set true if enable data connection on roaming
     */
    void setDataRoamingEnabled(boolean enable);

    /**
     *  Query the CDMA roaming preference setting
     *
     * @param response is callback message to report one of  CDMA_RM_*
     */
    void queryCdmaRoamingPreference(Message response);

    /**
     *  Requests to set the CDMA roaming preference
     * @param cdmaRoamingType one of  CDMA_RM_*
     * @param response is callback message
     */
    void setCdmaRoamingPreference(int cdmaRoamingType, Message response);

    /**
     *  Requests to set the CDMA subscription mode
     * @param cdmaSubscriptionType one of  CDMA_SUBSCRIPTION_*
     * @param response is callback message
     */
    void setCdmaSubscription(int cdmaSubscriptionType, Message response);

    /**
     * If this is a simulated phone interface, returns a SimulatedRadioControl.
     * @ return A SimulatedRadioControl if this is a simulated interface;
     * otherwise, null.
     */
    SimulatedRadioControl getSimulatedRadioControl();

    /**
     * Allow mobile data connections.
     * @return {@code true} if the operation started successfully
     * <br/>{@code false} if it
     * failed immediately.<br/>
     * Even in the {@code true} case, it may still fail later
     * during setup, in which case an asynchronous indication will
     * be supplied.
     */
    boolean enableDataConnectivity();

    /**
     * Disallow mobile data connections, and terminate any that
     * are in progress.
     * @return {@code true} if the operation started successfully
     * <br/>{@code false} if it
     * failed immediately.<br/>
     * Even in the {@code true} case, it may still fail later
     * during setup, in which case an asynchronous indication will
     * be supplied.
     */
    boolean disableDataConnectivity();

    /**
     * Report the current state of data connectivity (enabled or disabled)
     * @return {@code false} if data connectivity has been explicitly disabled,
     * {@code true} otherwise.
     */
    boolean isDataConnectivityEnabled();

    /**
     * Enables the specified APN type. Only works for "special" APN types,
     * i.e., not the default APN.
     * @param type The desired APN type. Cannot be {@link #APN_TYPE_DEFAULT}.
     * @return <code>APN_ALREADY_ACTIVE</code> if the current APN
     * services the requested type.<br/>
     * <code>APN_TYPE_NOT_AVAILABLE</code> if the carrier does not
     * support the requested APN.<br/>
     * <code>APN_REQUEST_STARTED</code> if the request has been initiated.<br/>
     * <code>APN_REQUEST_FAILED</code> if the request was invalid.<br/>
     * A <code>ACTION_ANY_DATA_CONNECTION_STATE_CHANGED</code> broadcast will
     * indicate connection state progress.
     */
    int enableApnType(String type);

    /**
     * Disables the specified APN type, and switches back to the default APN,
     * if necessary. Switching to the default APN will not happen if default
     * data traffic has been explicitly disabled via a call to {@link #disableDataConnectivity}.
     * <p/>Only works for "special" APN types,
     * i.e., not the default APN.
     * @param type The desired APN type. Cannot be {@link #APN_TYPE_DEFAULT}.
     * @return <code>APN_ALREADY_ACTIVE</code> if the default APN
     * is already active.<br/>
     * <code>APN_REQUEST_STARTED</code> if the request to switch to the default
     * APN has been initiated.<br/>
     * <code>APN_REQUEST_FAILED</code> if the request was invalid.<br/>
     * A <code>ACTION_ANY_DATA_CONNECTION_STATE_CHANGED</code> broadcast will
     * indicate connection state progress.
     */
    int disableApnType(String type);

    /**
     * Report on whether data connectivity is allowed.
     */
    boolean isDataConnectivityPossible();

    /**
     * Returns the name of the network interface used by the specified APN type.
     */
    String getInterfaceName(String apnType);

    /**
     * Returns the IP address of the network interface used by the specified
     * APN type.
     */
    String getIpAddress(String apnType);

    /**
     * Returns the gateway for the network interface used by the specified APN
     * type.
     */
    String getGateway(String apnType);

    /**
     * Returns the DNS servers for the network interface used by the specified
     * APN type.
     */
    public String[] getDnsServers(String apnType);

    /**
     * Retrieves the unique device ID, e.g., IMEI for GSM phones and MEID for CDMA phones.
     */
    String getDeviceId();

    /**
     * Retrieves the software version number for the device, e.g., IMEI/SV
     * for GSM phones.
     */
    String getDeviceSvn();

    /**
     * Retrieves the unique sbuscriber ID, e.g., IMSI for GSM phones.
     */
    String getSubscriberId();

    /**
     * Retrieves the serial number of the ICC, if applicable.
     */
    String getIccSerialNumber();

    /* CDMA support methods */

    /*
     * TODO(Moto) TODO(Teleca): can getCdmaMin, getEsn, getMeid use more generic calls
     * already defined getXxxx above?
     */

    /**
     * Retrieves the MIN for CDMA phones.
     */
    String getCdmaMin();

    /**
     * Check if subscription data has been assigned to mMin
     *
     * return true if MIN info is ready; false otherwise.
     */
    boolean isMinInfoReady();

    /**
     *  Retrieves PRL Version for CDMA phones
     */
    String getCdmaPrlVersion();

    /**
     * Retrieves the ESN for CDMA phones.
     */
    String getEsn();

    /**
     * Retrieves MEID for CDMA phones.
     */
    String getMeid();

    /**
     * Retrieves the PhoneSubInfo of the Phone
     */
    public PhoneSubInfo getPhoneSubInfo();

    /**
     * Retrieves the IccSmsInterfaceManager of the Phone
     */
    public IccSmsInterfaceManager getIccSmsInterfaceManager();

    /**
     * Retrieves the IccPhoneBookInterfaceManager of the Phone
     */
    public IccPhoneBookInterfaceManager getIccPhoneBookInterfaceManager();

    /**
     * setTTYMode
     * sets a TTY mode option.
     *
     * @param enable is a boolean representing the state that you are
     *        requesting, true for enabled, false for disabled.
     * @param onComplete a callback message when the action is completed
     */
    void setTTYMode(int ttyMode, Message onComplete);

    /**
     * queryTTYMode
     * query the status of the TTY mode
     *
     * @param onComplete a callback message when the action is completed.
     */
    void queryTTYMode(Message onComplete);

    /**
     * Activate or deactivate cell broadcast SMS.
     *
     * @param activate
     *            0 = activate, 1 = deactivate
     * @param response
     *            Callback message is empty on completion
     */
    void activateCellBroadcastSms(int activate, Message response);

    /**
     * Query the current configuration of cdma cell broadcast SMS.
     *
     * @param response
     *            Callback message is empty on completion
     */
    void getCellBroadcastSmsConfig(Message response);

    /**
     * Configure cell broadcast SMS.
     *
     * TODO: Change the configValuesArray to a RIL_BroadcastSMSConfig
     *
     * @param response
     *            Callback message is empty on completion
     */
    public void setCellBroadcastSmsConfig(int[] configValuesArray, Message response);

    public void notifyDataActivity();

    /**
     * Returns the CDMA ERI icon index to display
     */
    public int getCdmaEriIconIndex();

    /**
     * Returns the CDMA ERI icon mode,
     * 0 - ON
     * 1 - FLASHING
     */
    public int getCdmaEriIconMode();

    /**
     * Returns the CDMA ERI text,
     */
    public String getCdmaEriText();

    /**
     * request to exit emergency call back mode
     * the caller should use setOnECMModeExitResponse
     * to receive the emergency callback mode exit response
     */
    void exitEmergencyCallbackMode();

    /**
     * this decides if the dial number is OTA(Over the air provision) number or not
     * @param dialStr is string representing the dialing digit(s)
     * @return  true means the dialStr is OTA number, and false means the dialStr is not OTA number
     */
    boolean isOtaSpNumber(String dialStr);

    /**
     * Register for notifications when CDMA call waiting comes
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForCallWaiting(Handler h, int what, Object obj);

    /**
     * Unegister for notifications when CDMA Call waiting comes
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForCallWaiting(Handler h);


    /**
     * Register for signal information notifications from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a SuppServiceNotification instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */

    void registerForSignalInfo(Handler h, int what, Object obj) ;
    /**
     * Unregisters for signal information notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForSignalInfo(Handler h);

    /**
     * Register for display information notifications from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a SuppServiceNotification instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForDisplayInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for display information notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForDisplayInfo(Handler h) ;

    /**
     * Register for CDMA number information record notification from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a CdmaInformationRecords.CdmaNumberInfoRec
     * instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForNumberInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for number information record notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForNumberInfo(Handler h);

    /**
     * Register for CDMA redirected number information record notification
     * from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a CdmaInformationRecords.CdmaRedirectingNumberInfoRec
     * instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForRedirectedNumberInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for redirected number information record notification.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForRedirectedNumberInfo(Handler h);

    /**
     * Register for CDMA line control information record notification
     * from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a CdmaInformationRecords.CdmaLineControlInfoRec
     * instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForLineControlInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for line control information notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForLineControlInfo(Handler h);

    /**
     * Register for CDMA T53 CLIR information record notifications
     * from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a CdmaInformationRecords.CdmaT53ClirInfoRec
     * instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerFoT53ClirlInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for T53 CLIR information record notification
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForT53ClirInfo(Handler h);

    /**
     * Register for CDMA T53 audio control information record notifications
     * from the network.
     * Message.obj will contain an AsyncResult.
     * AsyncResult.result will be a CdmaInformationRecords.CdmaT53AudioControlInfoRec
     * instance.
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */
    void registerForT53AudioControlInfo(Handler h, int what, Object obj);

    /**
     * Unregisters for T53 audio control information record notifications.
     * Extraneous calls are tolerated silently
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unregisterForT53AudioControlInfo(Handler h);

    /**
     * registers for exit emergency call back mode request response
     *
     * @param h Handler that receives the notification message.
     * @param what User-defined message code.
     * @param obj User object.
     */

    void setOnEcbModeExitResponse(Handler h, int what, Object obj);

    /**
     * Unregisters for exit emergency call back mode request response
     *
     * @param h Handler to be removed from the registrant list.
     */
    void unsetOnEcbModeExitResponse(Handler h);


}