Cross Reference: /hardware/broadcom/wlan/bcm4329/src/bcmsdio/sys/bcmsdstd.c

Lines Matching defs:arg
79 static int sdstd_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd, uint32 arg);
89 static int sdstd_check_errs(sdioh_info_t *sdioh_info, uint32 cmd, uint32 arg);
382                void *params, int plen, void *arg, int len, bool set)
395 	ASSERT(set || (arg && len));
405 	if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, set)) != 0)
410 		params = arg;
430 		bcopy(&int_val, arg, val_size);
439 		bcopy(&int_val, arg, val_size);
452 		bcopy(&int_val, arg, val_size);
461 		bcopy(&int_val, arg, val_size);
470 		bcopy(&int_val, arg, val_size);
484 		bcopy(&int_val, arg, val_size);
521 		bcopy(&int_val, arg, val_size);
531 		bcopy(&int_val, arg, val_size);
544 		bcopy(&int_val, arg, val_size);
557 		bcopy(&int_val, arg, val_size);
580 		bcopy(&int_val, arg, val_size);
602 		bcopy(&int_val, arg, val_size);
616 		bcopy(&int_val, arg, val_size);
626 		bcopy(&int_val, arg, val_size);
631 		bcopy(&int_val, arg, val_size);
654 		bcopy(&int_val, arg, sizeof(int_val));
692 		bcopy(&int_val, arg, sizeof(int_val));
1131 sdstd_check_errs(sdioh_info_t *sdioh_info, uint32 cmd, uint32 arg)
1172 		function = GFIELD(arg, CMD53_FUNCTION);
1174 		function = GFIELD(arg, CMD52_FUNCTION);
2324 sdstd_cmd_issue(sdioh_info_t *sdioh_info, bool use_dma, uint32 cmd, uint32 arg)
2408 			GFIELD(arg, CMD52_FUNCTION),
2409 			GFIELD(arg, CMD52_REG_ADDR),
2410 			GFIELD(arg, CMD52_RW_FLAG) ? "W" : "R",
2411 			GFIELD(arg, CMD52_DATA)));
2425 			GFIELD(arg, CMD53_FUNCTION),
2426 			GFIELD(arg, CMD53_REG_ADDR),
2427 			GFIELD(arg, CMD53_RW_FLAG) ? "W" : "R",
2428 			GFIELD(arg, CMD53_BLK_MODE) ? "Block" : "Byte",
2429 			GFIELD(arg, CMD53_BYTE_BLK_CNT),
2430 			GFIELD(arg, CMD53_OP_CODE) ? "Incrementing addr" : "Single addr"));
2432 		cmd_arg = arg;
2581 	sdstd_wreg(sdioh_info, SD_Arg0, arg);
2628 		if (sdstd_check_errs(sdioh_info, cmd, arg)) {
2718 			sd_err(("%s: rsp5: Command not accepted: arg out of range 0x%x, "