Searched refs:Enable (Results 1 - 18 of 18) sorted by relevance

/system/bluetooth/data/
H A Daudio.conf5 # NOTE: Enable=Sink means that bluetoothd exposes Sink interface for remote
8 Enable=Sink,Control
/system/wlan/ti/sta_dk_4_0_4_32/common/src/BusAccess/Shm_Common/
H A DwhalTrace.c150 pTrc->Enable = 0; /*Hardcoded*/
257 * RETURNS: Enable value
261 return pTrc->Enable;
277 pTrc->Enable = val;
279 if(val == 1) /* Enable case*/
H A DwhalTrace.h104 int Enable; member in struct:_WhalTrace_T
/system/wlan/ti/sta_dk_4_0_4_32/common/src/hal/hw_ctrl/
H A DwhalHwMboxConfig.h95 int whal_hwInfoElemBETSet(HwMboxConfig_T* pHwMboxConfig, UINT8 Enable, UINT8 MaximumConsecutiveET);
H A DwhalHwCtrl.h220 int whal_hwCtrl_setBetParams(HwCtrl_T * pHwCtrl, UINT8 Enable, UINT8 MaximumConsecutiveET);
266 /* 802.11 ps Enable */
H A DwhalHwMboxConfig.c449 int whal_hwInfoElemBETSet(HwMboxConfig_T* pHwMboxConfig, UINT8 Enable, UINT8 MaximumConsecutiveET) argument
460 pCfg->Enable = Enable;
464 ("%s: Sending info elem to firmware, Enable=%d, MaximumConsecutiveET=%d\n",
465 __FUNCTION__, (UINT8)pCfg->Enable, (UINT8)pCfg->MaximumConsecutiveET));
950 * DESCRIPTION: Enable/Disable the BTH-WLAN
952 * INPUTS: Enable flag
964 ("whal_hwInfoElemSoftGeminiEnableSet: Enable flag = %d\n", SoftGeminiEnableModes));
971 pCfg->Enable = (UINT8)SoftGeminiEnableModes;
H A DwhalHwCtrl.c157 * DESCRIPTION: Enable Rx/Tx and send Start/Join command
173 ("whal_hwCtrl_StartJoin: Enable Tx, Rx and Start the Bss, type=%d\n", BssType));
263 * DESCRIPTION: Enable Rx/Tx and send Start/Join command
295 * DESCRIPTION: Enable Rx/Tx and send Start/Join command
522 * DESCRIPTION: Enable\Disable the ARP filter
993 /* Enable rx/tx path on the hardware */
1000 /* Enable the scan complete interrupt source */
3215 int whal_hwCtrl_setBetParams(HwCtrl_T * pHwCtrl, UINT8 Enable, UINT8 MaximumConsecutiveET) argument
3217 return whal_hwInfoElemBETSet(pHwCtrl->pHwMboxConfig, Enable, MaximumConsecutiveET);
/system/wlan/ti/wilink_6_1/TWD/Ctrl/
H A DCmdBldCfgIE.h92 TI_STATUS cmdBld_CfgIeBet (TI_HANDLE hCmdBld, TI_UINT8 Enable, TI_UINT8 MaximumConsecutiveET, void *fCb, TI_HANDLE hCb);
H A DCmdBldCfg.c112 * DESCRIPTION: Enable\Disable the ARP filter
903 /* Store the HW encryption Enable flag for reconfigure time (FW reload)*/
1129 TI_STATUS cmdBld_CfgBet (TI_HANDLE hCmdBld, TI_UINT8 Enable, TI_UINT8 MaximumConsecutiveET, void *fCb, TI_HANDLE hCb) argument
1131 DB_WLAN(hCmdBld).BetEnable = Enable;
1134 return cmdBld_CfgIeBet (hCmdBld, Enable, MaximumConsecutiveET, fCb, hCb);
H A DCmdBldCfgIE.c371 * DESCRIPTION: Enable/Disable the BTH-WLAN
373 * INPUTS: Enable flag
385 TRACE1(pCmdBld->hReport, REPORT_SEVERITY_INFORMATION, "cmdBld_CfgIeSgEnable: Enable flag = %d\n", SoftGeminiEnableModes);
1633 TI_STATUS cmdBld_CfgIeBet (TI_HANDLE hCmdBld, TI_UINT8 Enable, TI_UINT8 MaximumConsecutiveET, void *fCb, TI_HANDLE hCb) argument
1645 pCfg->Enable = Enable;
1648 TRACE2(pCmdBld->hReport, REPORT_SEVERITY_INFORMATION, ": Sending info elem to firmware, Enable=%d, MaximumConsecutiveET=%d\n", (TI_UINT32)pCfg->Enable, (TI_UINT32)pCfg->MaximumConsecutiveET);
H A DCmdBld.c953 /* Enable rx path on the hardware */
960 /* Enable tx path on the hardware */
992 /* Enable the scan complete interrupt source */
2192 TI_UINT8 Enable; local
2195 Status = cmdBld_GetArpIpAddressesTable (hCmdBld, &IpAddress, &Enable, &IPver);
2198 pMibBuf->aData.ArpIpAddressesTable.FilteringEnable = Enable;
H A DCmdBld.h146 TI_STATUS cmdBld_CfgBet (TI_HANDLE hCmdBld, TI_UINT8 Enable, TI_UINT8 MaximumConsecutiveET, void *fCb, TI_HANDLE hCb);
185 /* this is a solution for the EMP project Enable/Disable Rx Data*/
/system/wlan/ti/sta_dk_4_0_4_32/common/src/hal/FirmwareApi/
H A Dpublic_infoele.h623 10 SSID Filter Enable - When set, the WiLink discards all beacon,
627 9 Broadcast Filter Enable - When set, the WiLink discards all broadcast
630 5 BSSID Filter Enable - When set, the WiLink discards any frames with a
1099 #define FEAT_PCI_CLK_RUN_ENABLE 0x00000002 /* Enable CLK_RUN on PCI bus */
1823 uint8 Enable; /* specifies whether the SG feature will be enabled (0), */ member in struct:__anon962
1976 Bool_e sgAutoModeNoCts; /* Enable/Disable SG2.0 in auto mode: */
2075 Desc: Enable or Disable the Beacon Early Termination module. In addition initialized the
2086 uint8 Enable; /* specifies if beacon early termination procedure is enabled or disabled: 0 � disabled, 1 � enabled */ member in struct:__anon970
/system/wlan/ti/wilink_6_1/TWD/FirmwareApi/
H A Dpublic_infoele.h505 10 SSID Filter Enable - When set, the WiLink discards all beacon,
509 9 Broadcast Filter Enable - When set, the WiLink discards all broadcast
512 5 BSSID Filter Enable - When set, the WiLink discards any frames with a
1042 #define FEAT_PCI_CLK_RUN_ENABLE 0x00000002 /* Enable CLK_RUN on PCI bus */
1449 Bool_e txEnergyDetection; /* The Tx ED value for TELEC Enable/Disable*/
1732 Desc: Enable or Disable the Beacon Early Termination module. In addition initialized the
1743 uint8 Enable; /* specifies if beacon early termination procedure is enabled or disabled: 0 � disabled, 1 � enabled */ member in struct:__anon1294
1981 uint8 Enable; /* RadioScope feature will be enabled (1) or disabled(0) */ member in struct:__anon1305
2108 uint8 uPolicy; /* Enable / Disable */
/system/wlan/ti/wilink_6_1/TWD/TWDriver/
H A DTWDriverCtrl.c751 TI_STATUS TWD_CfgBet (TI_HANDLE hTWD, TI_UINT8 Enable, TI_UINT8 MaximumConsecutiveET) argument
757 return cmdBld_CfgBet (pTWD->hCmdBld, Enable, MaximumConsecutiveET, NULL, NULL);
H A DTWDriver.h1085 * \brief Soft-Gemini Enable Modes
1842 TI_BOOL beaconMissInterruptEnable; /**< Enable/Disable Beacon Miss Interrupt */
1843 TI_BOOL rxBroadcast; /**< Enable/Disable receive of broadcast packets in Power-Save mode */
1844 TI_BOOL hwPsPoll; /**< Enable/Disable Power-Save Polling */
1846 TI_BOOL ps802_11Enable; /**< Enable/Disable 802.11 Power-Save */
1857 TI_BOOL ELPEnable; /**< Enable/Disable ELP */
1880 TI_BOOL ps802_11Enable; /**< Enable/Disable 802.11 Power-Save */
2238 TI_UINT32 FilteringEnable; /**< Enable/Disable Filtering */
2254 TI_UINT8 bFilteringEnable; /**< Enable/Disable Filtering */
2342 TI_UINT32 CTSToSelfEnable; /**< Enable/Disabl
[all...]
/system/wlan/ti/sta_dk_4_0_4_32/common/src/hal/Export_Inc/
H A DwhalCtrl_api.h751 int whalCtrl_setBetParams(TI_HANDLE hWhalCtrl, UINT8 Enable, UINT8 MaximumConsecutiveET);
/system/wlan/ti/sta_dk_4_0_4_32/common/src/hal/hl_ctrl/
H A DwhalCtrl.c1306 * Process : Enable or disable the Rx Data Filtering feature.
2090 * Function : Enable/Disable/Check/Handle interrupts - call HwCtrl object
3899 UINT8 Enable; local
3905 &Enable,
3909 pMibBuf->aData.ArpIpAddressesTable.FilteringEnable = Enable;
4464 int whalCtrl_setBetParams(TI_HANDLE hWhalCtrl, UINT8 Enable, UINT8 MaximumConsecutiveET) argument
4468 pWhalCtrl->pWhalParams->WlanParams.BetEnable = Enable;
4471 return whal_hwCtrl_setBetParams(pWhalCtrl->pHwCtrl, Enable, MaximumConsecutiveET);

Completed in 123 milliseconds