| c7f57c6f9289d0e3aaecc0bca4ae7b6eed1c93d7 |
|
26-Jun-2012 |
John Grossman <johngro@google.com> |
Fix for bug 6691452
Hand merge from ics-aah
> Fix for bug 6691452 : DO NOT MERGE
>
> As it so happens, there seem to be panels out there who disapprove of
> sudden changes in their HDMI clock rate. In particular, Sony LCD
> panels made from around 2010-2011 (including the Sony GTV panel) seem
> to dislike this behavior. When exposed to a large jump in the clock
> rate (say from -100pmm to +100ppm in about 30mSec), they seem to
> panic, blank their audio and video, and then resync. The whole
> panic process takes about 2 seconds.
>
> The HDMI spec says that its clock jitter requirements are defined by
> their differential signalling eye diagram requirements relative to an
> "Ideal Recovery Clock" (see section 4.2.3.1 of the HDMI 1.3a spec).
> Basically, if you pass the eye diagram tests, you pass the clock
> jitter requirements. We have determined in lab that even being
> extremely aggressive in our VCXO rate changes does not come even close
> to violating the HDMI eye diagrams. Its just this era of Sony panels
> which seem to be upset by this behavior.
>
> One way or the other, experiments which the GTV devices have seemed to
> indicate that a full range sweep of the VCXO done in 10mSec steps over
> anything faster than 190mSec can cause trouble. Adding a healthy
> degree of margin to this finding, the fix is to limit the rate of VCXO
> control change such that it never goes at a rate faster than
> FullRange/300mSec.
>
> Change flagged as do not merge due to the code structure changes to master.
> This will need to be merged by hand.
>
> Signed-off-by: John Grossman <johngro@google.com>
> Change-Id: Ibfd361fe1cc2cbd4909489e3317fb12e005c6a75
Change-Id: If62f791c826f1145262a6b546b1dc1f9776c37d8
Signed-off-by: John Grossman <johngro@google.com>
/frameworks/base/services/common_time/Android.mk
|
| 11bc45fcba96cf7ccc5f67b3c47088c2c89c8e7a |
|
14-Feb-2012 |
Kent Ryhorchuk <kryhorchuk@google.com> |
New clock sync control loop.
Change clock sync control to velicity form PI loop. Tuned for office LAN and
WiFi conditions, will probably perform better in clean environments.
Improve packet filtering to prevent clock sync on bad rtt.
Changed diag interface to take rtt times, P, I, D are no longer supported.
Change-Id: Iad2b26eb44cd222ec5f219b49669e2d6baec9d1c
/frameworks/base/services/common_time/Android.mk
|
| 6c929510474caa14dc9d56826b2c65552861d6b3 |
|
15-Aug-2011 |
Mike J. Chen <mjchen@google.com> |
Upintegrate the common_time service from ics-aah.
Move the common_time service developed in the ics-aah branch back into
master.
The common_time service is a small service build to synchronize an
arbitrary timeline amongst peers on a local sub-net. While running
and configured, the service will elect a master from the set of
available devices within the subnet, define a relationship between the
common_time timeline the local time timeline (provided by the local
time HAL), and then attempt to maintain synchronization between common
and local time by controlling the frequency of the local time clock
via the HAL, or by disciplining local time in the digital domain if
the local time HAL implementation does not support HW slewing.
On its own, the native common time service will do nothing until it is
configured. The CommonTimeManagementService (running out of the
system server process) is responsible for implementing policy
regarding configuration and operation of the common_time service and
will be added in a subsequent CL.
Change-Id: I71292f9b9b1797665865689c4572c9d3a0552f64
Signed-off-by: John Grossman <johngro@google.com>
/frameworks/base/services/common_time/Android.mk
|