| 08ec39ecc68674c18cd11bc4d75b30309d6d970f |
|
18-Apr-2012 |
Ken Sumrall <ksumrall@android.com> |
Change init to use libfs_mgr to mount filesystems.
The new fs_mgr library moves much of the knowledge of what filesystems
to mount into a new fstab.<device> file, and just calls one function to
mount all the filesystems.
Change-Id: If3db37530a0676000cba3e679db27aca734227e5
/system/core/init/init_parser.c
|
| e46f9d510db9351682cf17c49115110870147335 |
|
13-Jan-2012 |
Stephen Smalley <sds@tycho.nsa.gov> |
Extend init and ueventd for SE Android.
Add SE Android support for init and ueventd.
init:
- Load policy at boot.
- Set the security context for service daemons and their sockets.
- New built-in commands: setcon, setenforce, restorecon, setsebool.
- New option for services: seclabel.
ueventd:
- Set the security context for device directories and nodes.
Change-Id: I98ed752cde503c94d99dfa5b5a47e3c33db16aac
/system/core/init/init_parser.c
|
| 84bf9af758c84da7d9ff2929bce06bf2b2f239b8 |
|
20-Dec-2011 |
Dima Zavin <dima@android.com> |
init: use init's property expansion code for setprop/write
Change-Id: I3c284860cc8d5106ac2b086e62baeb6263873935
Signed-off-by: Dima Zavin <dima@android.com>
/system/core/init/init_parser.c
|
| 78a1b1fe1ab76964e35b4a4788238b197bfd613d |
|
20-Dec-2011 |
Dima Zavin <dima@android.com> |
init: delay importing files until after parsing the current file
If we process the import directive inline, then the ordering of the
commands for the "on xxx" sections would be a little unexpected. The
init.rc files do not really have an implied order as to which section
appears and gets processed first. The init code itself provides that
ordering explicitly. For the user, the expectation is that if both the
current file and the imported file define a section (e.g. "on init"),
then the commands in the current file will be executed first, and then
the ones from the imported file(s).
The current implementation did not do that. It processed the import
directive inline, and thus the imported (i.e. dependent) files would
appear first in the command lists for the sections. This created
unintended side effects and the solution would have been to try and
put the import lines somewhere in the middle of the init file. This
would be difficult to notice and hard to extract the dependencies.
To solve this, we add the imports to a list for each file being parsed
and process the list after finishing parsing the file. This provides
predictable order for imports and provides a logical flow from the
user perspective: the currently parsed file gets to run its commands
before the files being imported.
Change-Id: I06dc35ff286314060e16b18923683cd2787269de
Signed-off-by: Dima Zavin <dima@android.com>
/system/core/init/init_parser.c
|
| a6235eacf4b06b14b19125618d7aca570dbc02b0 |
|
16-Dec-2011 |
Dima Zavin <dima@android.com> |
init: allow init file imports to use properties in names
Adds new property syntax in init files during init file filename
expansion during the import command:
${prop.name}
So, one can do: import /init.${ro.hardware}.usb.rc
Should convert other usages of property names to use the new function.
Change-Id: I9205d7d7a2da620bc8e6b89ac0eb554fad53ded3
Signed-off-by: Dima Zavin <dima@android.com>
/system/core/init/init_parser.c
|
| a286480f56012abdb4ef4ddab1c19a5c2316b7b8 |
|
27-Oct-2011 |
Ken Sumrall <ksumrall@android.com> |
Fix the class_reset command
The class_reset command used to reset services that had been set to
"disabled" in the init.rc file to a non-disabled state. Now, if the
service was originally set to "disabled", have the reset command set
it back to disabled. Otherwise, set it to the "reset" state as it
currently does.
Change-Id: I0c10582e46a8e443d4748d9d893ae762b19b653a
/system/core/init/init_parser.c
|
| da04c52ab1036048520fca265cf02b61dca789e0 |
|
02-Sep-2011 |
Dima Zavin <dima@android.com> |
init/cutils: move list utility code to cutils from init
Change-Id: I357ceee813700297d8343159f22a07659e768d41
Signed-off-by: Dima Zavin <dima@android.com>
/system/core/init/init_parser.c
|
| f5cb5b24356fae2dfa3477589ee0f3c094479e63 |
|
08-Jun-2011 |
Mike Lockwood <lockwood@android.com> |
init: Fix the init.rc import command
Change-Id: I8a91c3f7d1ca31e137d9043bb7f56e4a44fb63df
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/init/init_parser.c
|
| 7ba61b15ed11e168457270f20f5a80992756524a |
|
08-Jun-2011 |
Mike Lockwood <lockwood@android.com> |
init: Allow wildcards in property triggers by using * for property value
For example, the following trigger will fire when the sys.foo property
is set to any value:
on property:sys.foo=*
write /data/foo hello
It is also possible to refer to the property within the trigger actions:
on property:sys.foo=*
write /data/foo $sys.foo
Change-Id: If78d20a532f77e17aa5703d53be581ad6736cbcf
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/init/init_parser.c
|
| c5c51033c86353d1a448c72e0e9388906eed7114 |
|
09-Mar-2011 |
Ken Sumrall <ksumrall@android.com> |
Load the persistent properties after decrypting the /data partition
Fix for bug 3415286. The persistent properties are normally read early
in the boot process after /data is mounted. However, for an encrypted
system, at that point /data is a tmpfs ramdisk. This change adds a new
command to init (load_persist_props) to read the persistent properties,
and adds an action to init.rc to load the persistent properties. This
action is triggered by setting a property in vold, but that's in a
different CL.
Change-Id: I74b3057974ee6029c29d956b76fef5566700d471
/system/core/init/init_parser.c
|
| 203bad597fb4e46ddda051add28400070b5c3a5a |
|
19-Jan-2011 |
Ken Sumrall <ksumrall@android.com> |
Add the commands rm and rmdir to init.
rm only removes a single non-directory directory entry (no -r support)
rmdir removes a single empty directory
Change-Id: I49702b02ba98a177027b126268c2c2846f968195
/system/core/init/init_parser.c
|
| 1be6968d9d51f43fdb00535708a6fed0be6bfbca |
|
26-Dec-2010 |
Bruce Beare <bruce.j.beare@intel.com> |
init: Fix parser line numbering
Change-Id: I1ac481a2cef749b26c73bc9e6a212e6ace7a0ae2
/system/core/init/init_parser.c
|
| 752923c168009d03e9e00e590155fbd0a2880ccb |
|
04-Dec-2010 |
Ken Sumrall <ksumrall@android.com> |
Changes to init to support encrypted filesystems.
These are the changes to init and init.rc necessary to
support booting with and encrypted /data filesystem.
A corresponding change to init.<device>.rc goes along
with this change.
Change-Id: I0c7e2cc39568358014a82e317735c0eae14dd683
/system/core/init/init_parser.c
|
| d5c8ddfdf3f275226c02dc00ccbe63229acf6786 |
|
08-Dec-2010 |
Iliyan Malchev <malchev@google.com> |
Revert "Add "slow_start" keyword to init"
This reverts commit 50b3afd9f39619f69dc6f4efc29be88933eb3614.
/system/core/init/init_parser.c
|
| 50b3afd9f39619f69dc6f4efc29be88933eb3614 |
|
05-Dec-2010 |
Paul Eastham <eastham@google.com> |
Add "slow_start" keyword to init
This keyword will cause init to wait a few seconds before exec'ing
the target binary. Maybe only useful for hacks and debugging.
Change-Id: I85caa0bcbc0be7e48bd21eb9e31e039c0740c8d5
/system/core/init/init_parser.c
|
| 912ff85b035e0e6bc109812c1ea5661ea4df5967 |
|
01-Oct-2010 |
Mike Lockwood <lockwood@android.com> |
init: Add support for SOCK_SEQPACKET socket type
Change-Id: Ib264ecf9beb2685b070436d2bdec9655c7a31b47
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/init/init_parser.c
|
| 6310a8261c922533a692fb3e74ece2da98d4bafa |
|
20-Apr-2010 |
Colin Cross <ccross@android.com> |
init: Split parser into generic parser and init parser
Change-Id: I451ebc4ff12f2ac660eb533fa10ad561fa25c9dd
/system/core/init/init_parser.c
|