1% -*- mode: latex; TeX-master: "Vorbis_I_spec"; -*-
2%!TEX root = Vorbis_I_spec.tex
3% $Id$
4\section{comment field and header specification} \label{vorbis:spec:comment}
5
6\subsection{Overview}
7
8The Vorbis text comment header is the second (of three) header
9packets that begin a Vorbis bitstream. It is meant for short text
10comments, not arbitrary metadata; arbitrary metadata belongs in a
11separate logical bitstream (usually an XML stream type) that provides
12greater structure and machine parseability.
13
14The comment field is meant to be used much like someone jotting a
15quick note on the bottom of a CDR. It should be a little information to
16remember the disc by and explain it to others; a short, to-the-point
17text note that need not only be a couple words, but isn't going to be
18more than a short paragraph.  The essentials, in other words, whatever
19they turn out to be, eg:
20
21\begin{quote}
22Honest Bob and the Factory-to-Dealer-Incentives, \textit{``I'm Still
23Around''}, opening for Moxy Fr\"{u}vous, 1997.
24\end{quote}
25
26
27
28
29\subsection{Comment encoding}
30
31\subsubsection{Structure}
32
33The comment header is logically a list of eight-bit-clean vectors; the
34number of vectors is bounded to $2^{32}-1$ and the length of each vector
35is limited to $2^{32}-1$ bytes. The vector length is encoded; the vector
36contents themselves are not null terminated. In addition to the vector
37list, there is a single vector for vendor name (also 8 bit clean,
38length encoded in 32 bits). For example, the 1.0 release of libvorbis
39set the vendor string to ``Xiph.Org libVorbis I 20020717''.
40
41The vector lengths and number of vectors are stored lsb first, according
42to the bit packing conventions of the vorbis codec. However, since data
43in the comment header is octet-aligned, they can simply be read as
44unaligned 32 bit little endian unsigned integers.
45
46The comment header is decoded as follows:
47
48\begin{programlisting}
49  1) [vendor_length] = read an unsigned integer of 32 bits
50  2) [vendor_string] = read a UTF-8 vector as [vendor_length] octets
51  3) [user_comment_list_length] = read an unsigned integer of 32 bits
52  4) iterate [user_comment_list_length] times {
53       5) [length] = read an unsigned integer of 32 bits
54       6) this iteration's user comment = read a UTF-8 vector as [length] octets
55     }
56  7) [framing_bit] = read a single bit as boolean
57  8) if ( [framing_bit] unset or end-of-packet ) then ERROR
58  9) done.
59\end{programlisting}
60
61
62
63
64\subsubsection{Content vector format}
65
66The comment vectors are structured similarly to a UNIX environment variable.
67That is, comment fields consist of a field name and a corresponding value and
68look like:
69
70\begin{quote}
71\begin{programlisting}
72comment[0]="ARTIST=me";
73comment[1]="TITLE=the sound of Vorbis";
74\end{programlisting}
75\end{quote}
76
77The field name is case-insensitive and may consist of ASCII 0x20
78through 0x7D, 0x3D ('=') excluded. ASCII 0x41 through 0x5A inclusive
79(characters A-Z) is to be considered equivalent to ASCII 0x61 through
800x7A inclusive (characters a-z).
81
82
83The field name is immediately followed by ASCII 0x3D ('=');
84this equals sign is used to terminate the field name.
85
86
870x3D is followed by 8 bit clean UTF-8 encoded value of the
88field contents to the end of the field.
89
90
91\paragraph{Field names}
92
93Below is a proposed, minimal list of standard field names with a
94description of intended use.  No single or group of field names is
95mandatory; a comment header may contain one, all or none of the names
96in this list.
97
98\begin{description} %[style=nextline]
99\item[TITLE]
100	Track/Work name
101
102\item[VERSION]
103	The version field may be used to differentiate multiple
104versions of the same track title in a single collection. (e.g. remix
105info)
106
107\item[ALBUM]
108	The collection name to which this track belongs
109
110\item[TRACKNUMBER]
111	The track number of this piece if part of a specific larger collection or album
112
113\item[ARTIST]
114	The artist generally considered responsible for the work. In popular music this is usually the performing band or singer. For classical music it would be the composer. For an audio book it would be the author of the original text.
115
116\item[PERFORMER]
117	The artist(s) who performed the work. In classical music this would be the conductor, orchestra, soloists. In an audio book it would be the actor who did the reading. In popular music this is typically the same as the ARTIST and is omitted.
118
119\item[COPYRIGHT]
120	Copyright attribution, e.g., '2001 Nobody's Band' or '1999 Jack Moffitt'
121
122\item[LICENSE]
123	License information, eg, 'All Rights Reserved', 'Any
124Use Permitted', a URL to a license such as a Creative Commons license
125("www.creativecommons.org/blahblah/license.html") or the EFF Open
126Audio License ('distributed under the terms of the Open Audio
127License. see http://www.eff.org/IP/Open_licenses/eff_oal.html for
128details'), etc.
129
130\item[ORGANIZATION]
131	Name of the organization producing the track (i.e.
132the 'record label')
133
134\item[DESCRIPTION]
135	A short text description of the contents
136
137\item[GENRE]
138	A short text indication of music genre
139
140\item[DATE]
141	Date the track was recorded
142
143\item[LOCATION]
144	Location where track was recorded
145
146\item[CONTACT]
147	Contact information for the creators or distributors of the track. This could be a URL, an email address, the physical address of the producing label.
148
149\item[ISRC]
150	International Standard Recording Code for the
151track; see \href{http://www.ifpi.org/isrc/}{the ISRC
152intro page} for more information on ISRC numbers.
153
154\end{description}
155
156
157
158\paragraph{Implications}
159
160Field names should not be 'internationalized'; this is a
161concession to simplicity not an attempt to exclude the majority of
162the world that doesn't speak English. Field \emph{contents},
163however, use the UTF-8 character encoding to allow easy representation
164of any language.
165
166We have the length of the entirety of the field and restrictions on
167the field name so that the field name is bounded in a known way. Thus
168we also have the length of the field contents.
169
170Individual 'vendors' may use non-standard field names within
171reason. The proper use of comment fields should be clear through
172context at this point.  Abuse will be discouraged.
173
174There is no vendor-specific prefix to 'nonstandard' field names.
175Vendors should make some effort to avoid arbitrarily polluting the
176common namespace. We will generally collect the more useful tags
177here to help with standardization.
178
179Field names are not required to be unique (occur once) within a
180comment header.  As an example, assume a track was recorded by three
181well know artists; the following is permissible, and encouraged:
182
183\begin{quote}
184\begin{programlisting}
185ARTIST=Dizzy Gillespie
186ARTIST=Sonny Rollins
187ARTIST=Sonny Stitt
188\end{programlisting}
189\end{quote}
190
191
192
193
194
195
196
197\subsubsection{Encoding}
198
199The comment header comprises the entirety of the second bitstream
200header packet.  Unlike the first bitstream header packet, it is not
201generally the only packet on the second page and may not be restricted
202to within the second bitstream page.  The length of the comment header
203packet is (practically) unbounded.  The comment header packet is not
204optional; it must be present in the bitstream even if it is
205effectively empty.
206
207The comment header is encoded as follows (as per Ogg's standard
208bitstream mapping which renders least-significant-bit of the word to be
209coded into the least significant available bit of the current
210bitstream octet first):
211
212\begin{enumerate}
213 \item
214  Vendor string length (32 bit unsigned quantity specifying number of octets)
215
216 \item
217  Vendor string ([vendor string length] octets coded from beginning of string to end of string, not null terminated)
218
219 \item
220  Number of comment fields (32 bit unsigned quantity specifying number of fields)
221
222 \item
223  Comment field 0 length (if [Number of comment fields] $>0$; 32 bit unsigned quantity specifying number of octets)
224
225 \item
226  Comment field 0 ([Comment field 0 length] octets coded from beginning of string to end of string, not null terminated)
227
228 \item
229  Comment field 1 length (if [Number of comment fields] $>1$...)...
230
231\end{enumerate}
232
233
234This is actually somewhat easier to describe in code; implementation of the above can be found in \filename{vorbis/lib/info.c}, \function{_vorbis_pack_comment()} and \function{_vorbis_unpack_comment()}.
235
236
237
238
239
240
241