xref: /frameworks/base/wifi/java/android/net/wifi/WifiManager.java

/*
 * Copyright (C) 2008 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.net.wifi;

import android.annotation.SdkConstant;
import android.annotation.SdkConstant.SdkConstantType;
import android.content.Context;
import android.net.DhcpInfo;
import android.os.Binder;
import android.os.IBinder;
import android.os.Handler;
import android.os.Looper;
import android.os.Message;
import android.os.RemoteException;
import android.os.WorkSource;
import android.os.Messenger;
import android.util.SparseArray;

import com.android.internal.util.AsyncChannel;
import com.android.internal.util.Protocol;

import java.util.List;

/**
 * This class provides the primary API for managing all aspects of Wi-Fi
 * connectivity. Get an instance of this class by calling
 * {@link android.content.Context#getSystemService(String) Context.getSystemService(Context.WIFI_SERVICE)}.

 * It deals with several categories of items:
 * <ul>
 * <li>The list of configured networks. The list can be viewed and updated,
 * and attributes of individual entries can be modified.</li>
 * <li>The currently active Wi-Fi network, if any. Connectivity can be
 * established or torn down, and dynamic information about the state of
 * the network can be queried.</li>
 * <li>Results of access point scans, containing enough information to
 * make decisions about what access point to connect to.</li>
 * <li>It defines the names of various Intent actions that are broadcast
 * upon any sort of change in Wi-Fi state.
 * </ul>
 * This is the API to use when performing Wi-Fi specific operations. To
 * perform operations that pertain to network connectivity at an abstract
 * level, use {@link android.net.ConnectivityManager}.
 */
public class WifiManager {

    // Supplicant error codes:
    /**
     * The error code if there was a problem authenticating.
     */
    public static final int ERROR_AUTHENTICATING = 1;

    /**
     * Broadcast intent action indicating that Wi-Fi has been enabled, disabled,
     * enabling, disabling, or unknown. One extra provides this state as an int.
     * Another extra provides the previous state, if available.
     *
     * @see #EXTRA_WIFI_STATE
     * @see #EXTRA_PREVIOUS_WIFI_STATE
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String WIFI_STATE_CHANGED_ACTION =
        "android.net.wifi.WIFI_STATE_CHANGED";
    /**
     * The lookup key for an int that indicates whether Wi-Fi is enabled,
     * disabled, enabling, disabling, or unknown.  Retrieve it with
     * {@link android.content.Intent#getIntExtra(String,int)}.
     *
     * @see #WIFI_STATE_DISABLED
     * @see #WIFI_STATE_DISABLING
     * @see #WIFI_STATE_ENABLED
     * @see #WIFI_STATE_ENABLING
     * @see #WIFI_STATE_UNKNOWN
     */
    public static final String EXTRA_WIFI_STATE = "wifi_state";
    /**
     * The previous Wi-Fi state.
     *
     * @see #EXTRA_WIFI_STATE
     */
    public static final String EXTRA_PREVIOUS_WIFI_STATE = "previous_wifi_state";

    /**
     * Wi-Fi is currently being disabled. The state will change to {@link #WIFI_STATE_DISABLED} if
     * it finishes successfully.
     *
     * @see #WIFI_STATE_CHANGED_ACTION
     * @see #getWifiState()
     */
    public static final int WIFI_STATE_DISABLING = 0;
    /**
     * Wi-Fi is disabled.
     *
     * @see #WIFI_STATE_CHANGED_ACTION
     * @see #getWifiState()
     */
    public static final int WIFI_STATE_DISABLED = 1;
    /**
     * Wi-Fi is currently being enabled. The state will change to {@link #WIFI_STATE_ENABLED} if
     * it finishes successfully.
     *
     * @see #WIFI_STATE_CHANGED_ACTION
     * @see #getWifiState()
     */
    public static final int WIFI_STATE_ENABLING = 2;
    /**
     * Wi-Fi is enabled.
     *
     * @see #WIFI_STATE_CHANGED_ACTION
     * @see #getWifiState()
     */
    public static final int WIFI_STATE_ENABLED = 3;
    /**
     * Wi-Fi is in an unknown state. This state will occur when an error happens while enabling
     * or disabling.
     *
     * @see #WIFI_STATE_CHANGED_ACTION
     * @see #getWifiState()
     */
    public static final int WIFI_STATE_UNKNOWN = 4;

    /**
     * Broadcast intent action indicating that Wi-Fi AP has been enabled, disabled,
     * enabling, disabling, or failed.
     *
     * @hide
     */
    public static final String WIFI_AP_STATE_CHANGED_ACTION =
        "android.net.wifi.WIFI_AP_STATE_CHANGED";

    /**
     * The lookup key for an int that indicates whether Wi-Fi AP is enabled,
     * disabled, enabling, disabling, or failed.  Retrieve it with
     * {@link android.content.Intent#getIntExtra(String,int)}.
     *
     * @see #WIFI_AP_STATE_DISABLED
     * @see #WIFI_AP_STATE_DISABLING
     * @see #WIFI_AP_STATE_ENABLED
     * @see #WIFI_AP_STATE_ENABLING
     * @see #WIFI_AP_STATE_FAILED
     *
     * @hide
     */
    public static final String EXTRA_WIFI_AP_STATE = "wifi_state";
    /**
     * The previous Wi-Fi state.
     *
     * @see #EXTRA_WIFI_AP_STATE
     *
     * @hide
     */
    public static final String EXTRA_PREVIOUS_WIFI_AP_STATE = "previous_wifi_state";
    /**
     * Wi-Fi AP is currently being disabled. The state will change to
     * {@link #WIFI_AP_STATE_DISABLED} if it finishes successfully.
     *
     * @see #WIFI_AP_STATE_CHANGED_ACTION
     * @see #getWifiApState()
     *
     * @hide
     */
    public static final int WIFI_AP_STATE_DISABLING = 10;
    /**
     * Wi-Fi AP is disabled.
     *
     * @see #WIFI_AP_STATE_CHANGED_ACTION
     * @see #getWifiState()
     *
     * @hide
     */
    public static final int WIFI_AP_STATE_DISABLED = 11;
    /**
     * Wi-Fi AP is currently being enabled. The state will change to
     * {@link #WIFI_AP_STATE_ENABLED} if it finishes successfully.
     *
     * @see #WIFI_AP_STATE_CHANGED_ACTION
     * @see #getWifiApState()
     *
     * @hide
     */
    public static final int WIFI_AP_STATE_ENABLING = 12;
    /**
     * Wi-Fi AP is enabled.
     *
     * @see #WIFI_AP_STATE_CHANGED_ACTION
     * @see #getWifiApState()
     *
     * @hide
     */
    public static final int WIFI_AP_STATE_ENABLED = 13;
    /**
     * Wi-Fi AP is in a failed state. This state will occur when an error occurs during
     * enabling or disabling
     *
     * @see #WIFI_AP_STATE_CHANGED_ACTION
     * @see #getWifiApState()
     *
     * @hide
     */
    public static final int WIFI_AP_STATE_FAILED = 14;

    /**
     * Broadcast intent action indicating that a connection to the supplicant has
     * been established (and it is now possible
     * to perform Wi-Fi operations) or the connection to the supplicant has been
     * lost. One extra provides the connection state as a boolean, where {@code true}
     * means CONNECTED.
     * @see #EXTRA_SUPPLICANT_CONNECTED
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String SUPPLICANT_CONNECTION_CHANGE_ACTION =
        "android.net.wifi.supplicant.CONNECTION_CHANGE";
    /**
     * The lookup key for a boolean that indicates whether a connection to
     * the supplicant daemon has been gained or lost. {@code true} means
     * a connection now exists.
     * Retrieve it with {@link android.content.Intent#getBooleanExtra(String,boolean)}.
     */
    public static final String EXTRA_SUPPLICANT_CONNECTED = "connected";
    /**
     * Broadcast intent action indicating that the state of Wi-Fi connectivity
     * has changed. One extra provides the new state
     * in the form of a {@link android.net.NetworkInfo} object. If the new
     * state is CONNECTED, additional extras may provide the BSSID and WifiInfo of
     * the access point.
     * as a {@code String}.
     * @see #EXTRA_NETWORK_INFO
     * @see #EXTRA_BSSID
     * @see #EXTRA_WIFI_INFO
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String NETWORK_STATE_CHANGED_ACTION = "android.net.wifi.STATE_CHANGE";
    /**
     * The lookup key for a {@link android.net.NetworkInfo} object associated with the
     * Wi-Fi network. Retrieve with
     * {@link android.content.Intent#getParcelableExtra(String)}.
     */
    public static final String EXTRA_NETWORK_INFO = "networkInfo";
    /**
     * The lookup key for a String giving the BSSID of the access point to which
     * we are connected. Only present when the new state is CONNECTED.
     * Retrieve with
     * {@link android.content.Intent#getStringExtra(String)}.
     */
    public static final String EXTRA_BSSID = "bssid";
    /**
     * The lookup key for a {@link android.net.wifi.WifiInfo} object giving the
     * information about the access point to which we are connected. Only present
     * when the new state is CONNECTED.  Retrieve with
     * {@link android.content.Intent#getParcelableExtra(String)}.
     */
    public static final String EXTRA_WIFI_INFO = "wifiInfo";
    /**
     * Broadcast intent action indicating that the state of establishing a connection to
     * an access point has changed.One extra provides the new
     * {@link SupplicantState}. Note that the supplicant state is Wi-Fi specific, and
     * is not generally the most useful thing to look at if you are just interested in
     * the overall state of connectivity.
     * @see #EXTRA_NEW_STATE
     * @see #EXTRA_SUPPLICANT_ERROR
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String SUPPLICANT_STATE_CHANGED_ACTION =
        "android.net.wifi.supplicant.STATE_CHANGE";
    /**
     * The lookup key for a {@link SupplicantState} describing the new state
     * Retrieve with
     * {@link android.content.Intent#getParcelableExtra(String)}.
     */
    public static final String EXTRA_NEW_STATE = "newState";

    /**
     * The lookup key for a {@link SupplicantState} describing the supplicant
     * error code if any
     * Retrieve with
     * {@link android.content.Intent#getIntExtra(String, int)}.
     * @see #ERROR_AUTHENTICATING
     */
    public static final String EXTRA_SUPPLICANT_ERROR = "supplicantError";

    /**
     * Broadcast intent action indicating that the configured networks changed.
     * This can be as a result of adding/updating/deleting a network
     * @hide
     */
    public static final String CONFIGURED_NETWORKS_CHANGED_ACTION =
        "android.net.wifi.CONFIGURED_NETWORKS_CHANGE";
    /**
     * An access point scan has completed, and results are available from the supplicant.
     * Call {@link #getScanResults()} to obtain the results.
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String SCAN_RESULTS_AVAILABLE_ACTION = "android.net.wifi.SCAN_RESULTS";
    /**
     * The RSSI (signal strength) has changed.
     * @see #EXTRA_NEW_RSSI
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String RSSI_CHANGED_ACTION = "android.net.wifi.RSSI_CHANGED";
    /**
     * The lookup key for an {@code int} giving the new RSSI in dBm.
     */
    public static final String EXTRA_NEW_RSSI = "newRssi";

    /**
     * Broadcast intent action indicating that the link configuration
     * changed on wifi.
     * @hide
     */
    public static final String LINK_CONFIGURATION_CHANGED_ACTION =
        "android.net.wifi.LINK_CONFIGURATION_CHANGED";

    /**
     * The lookup key for a {@link android.net.LinkProperties} object associated with the
     * Wi-Fi network. Retrieve with
     * {@link android.content.Intent#getParcelableExtra(String)}.
     * @hide
     */
    public static final String EXTRA_LINK_PROPERTIES = "linkProperties";

    /**
     * The lookup key for a {@link android.net.LinkCapabilities} object associated with the
     * Wi-Fi network. Retrieve with
     * {@link android.content.Intent#getParcelableExtra(String)}.
     * @hide
     */
    public static final String EXTRA_LINK_CAPABILITIES = "linkCapabilities";

    /**
     * The network IDs of the configured networks could have changed.
     */
    @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION)
    public static final String NETWORK_IDS_CHANGED_ACTION = "android.net.wifi.NETWORK_IDS_CHANGED";

    /**
     * Activity Action: Pick a Wi-Fi network to connect to.
     * <p>Input: Nothing.
     * <p>Output: Nothing.
     */
    @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION)
    public static final String ACTION_PICK_WIFI_NETWORK = "android.net.wifi.PICK_WIFI_NETWORK";

    /**
     * In this Wi-Fi lock mode, Wi-Fi will be kept active,
     * and will behave normally, i.e., it will attempt to automatically
     * establish a connection to a remembered access point that is
     * within range, and will do periodic scans if there are remembered
     * access points but none are in range.
     */
    public static final int WIFI_MODE_FULL = 1;
    /**
     * In this Wi-Fi lock mode, Wi-Fi will be kept active,
     * but the only operation that will be supported is initiation of
     * scans, and the subsequent reporting of scan results. No attempts
     * will be made to automatically connect to remembered access points,
     * nor will periodic scans be automatically performed looking for
     * remembered access points. Scans must be explicitly requested by
     * an application in this mode.
     */
    public static final int WIFI_MODE_SCAN_ONLY = 2;
    /**
     * In this Wi-Fi lock mode, Wi-Fi will be kept active as in mode
     * {@link #WIFI_MODE_FULL} but it operates at high performance
     * with minimum packet loss and low packet latency even when
     * the device screen is off. This mode will consume more power
     * and hence should be used only when there is a need for such
     * an active connection.
     * <p>
     * An example use case is when a voice connection needs to be
     * kept active even after the device screen goes off. Holding the
     * regular {@link #WIFI_MODE_FULL} lock will keep the wifi
     * connection active, but the connection can be lossy.
     * Holding a {@link #WIFI_MODE_FULL_HIGH_PERF} lock for the
     * duration of the voice call will improve the call quality.
     * <p>
     * When there is no support from the hardware, this lock mode
     * will have the same behavior as {@link #WIFI_MODE_FULL}
     */
    public static final int WIFI_MODE_FULL_HIGH_PERF = 3;

    /** Anything worse than or equal to this will show 0 bars. */
    private static final int MIN_RSSI = -100;

    /** Anything better than or equal to this will show the max bars. */
    private static final int MAX_RSSI = -55;

    /**
     * Number of RSSI levels used in the framework to initiate
     * {@link #RSSI_CHANGED_ACTION} broadcast
     * @hide
     */
    public static final int RSSI_LEVELS = 5;

    /**
     * Auto settings in the driver. The driver could choose to operate on both
     * 2.4 GHz and 5 GHz or make a dynamic decision on selecting the band.
     * @hide
     */
    public static final int WIFI_FREQUENCY_BAND_AUTO = 0;

    /**
     * Operation on 5 GHz alone
     * @hide
     */
    public static final int WIFI_FREQUENCY_BAND_5GHZ = 1;

    /**
     * Operation on 2.4 GHz alone
     * @hide
     */
    public static final int WIFI_FREQUENCY_BAND_2GHZ = 2;

    /** List of asyncronous notifications
     * @hide
     */
    public static final int DATA_ACTIVITY_NOTIFICATION = 1;

    //Lowest bit indicates data reception and the second lowest
    //bit indicates data transmitted
    /** @hide */
    public static final int DATA_ACTIVITY_NONE         = 0x00;
    /** @hide */
    public static final int DATA_ACTIVITY_IN           = 0x01;
    /** @hide */
    public static final int DATA_ACTIVITY_OUT          = 0x02;
    /** @hide */
    public static final int DATA_ACTIVITY_INOUT        = 0x03;

    IWifiManager mService;
    Handler mHandler;

    /* Maximum number of active locks we allow.
     * This limit was added to prevent apps from creating a ridiculous number
     * of locks and crashing the system by overflowing the global ref table.
     */
    private static final int MAX_ACTIVE_LOCKS = 50;

    /* Number of currently active WifiLocks and MulticastLocks */
    private int mActiveLockCount;

    /**
     * Create a new WifiManager instance.
     * Applications will almost always want to use
     * {@link android.content.Context#getSystemService Context.getSystemService()} to retrieve
     * the standard {@link android.content.Context#WIFI_SERVICE Context.WIFI_SERVICE}.
     * @param service the Binder interface
     * @param handler target for messages
     * @hide - hide this because it takes in a parameter of type IWifiManager, which
     * is a system private class.
     */
    public WifiManager(IWifiManager service, Handler handler) {
        mService = service;
        mHandler = handler;
    }

    /**
     * Return a list of all the networks configured in the supplicant.
     * Not all fields of WifiConfiguration are returned. Only the following
     * fields are filled in:
     * <ul>
     * <li>networkId</li>
     * <li>SSID</li>
     * <li>BSSID</li>
     * <li>priority</li>
     * <li>allowedProtocols</li>
     * <li>allowedKeyManagement</li>
     * <li>allowedAuthAlgorithms</li>
     * <li>allowedPairwiseCiphers</li>
     * <li>allowedGroupCiphers</li>
     * </ul>
     * @return a list of network configurations in the form of a list
     * of {@link WifiConfiguration} objects.
     */
    public List<WifiConfiguration> getConfiguredNetworks() {
        try {
            return mService.getConfiguredNetworks();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Add a new network description to the set of configured networks.
     * The {@code networkId} field of the supplied configuration object
     * is ignored.
     * <p/>
     * The new network will be marked DISABLED by default. To enable it,
     * called {@link #enableNetwork}.
     *
     * @param config the set of variables that describe the configuration,
     *            contained in a {@link WifiConfiguration} object.
     * @return the ID of the newly created network description. This is used in
     *         other operations to specified the network to be acted upon.
     *         Returns {@code -1} on failure.
     */
    public int addNetwork(WifiConfiguration config) {
        if (config == null) {
            return -1;
        }
        config.networkId = -1;
        return addOrUpdateNetwork(config);
    }

    /**
     * Update the network description of an existing configured network.
     *
     * @param config the set of variables that describe the configuration,
     *            contained in a {@link WifiConfiguration} object. It may
     *            be sparse, so that only the items that are being changed
     *            are non-<code>null</code>. The {@code networkId} field
     *            must be set to the ID of the existing network being updated.
     * @return Returns the {@code networkId} of the supplied
     *         {@code WifiConfiguration} on success.
     *         <br/>
     *         Returns {@code -1} on failure, including when the {@code networkId}
     *         field of the {@code WifiConfiguration} does not refer to an
     *         existing network.
     */
    public int updateNetwork(WifiConfiguration config) {
        if (config == null || config.networkId < 0) {
            return -1;
        }
        return addOrUpdateNetwork(config);
    }

    /**
     * Internal method for doing the RPC that creates a new network description
     * or updates an existing one.
     *
     * @param config The possibly sparse object containing the variables that
     *         are to set or updated in the network description.
     * @return the ID of the network on success, {@code -1} on failure.
     */
    private int addOrUpdateNetwork(WifiConfiguration config) {
        try {
            return mService.addOrUpdateNetwork(config);
        } catch (RemoteException e) {
            return -1;
        }
    }

    /**
     * Remove the specified network from the list of configured networks.
     * This may result in the asynchronous delivery of state change
     * events.
     * @param netId the integer that identifies the network configuration
     * to the supplicant
     * @return {@code true} if the operation succeeded
     */
    public boolean removeNetwork(int netId) {
        try {
            return mService.removeNetwork(netId);
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Allow a previously configured network to be associated with. If
     * <code>disableOthers</code> is true, then all other configured
     * networks are disabled, and an attempt to connect to the selected
     * network is initiated. This may result in the asynchronous delivery
     * of state change events.
     * @param netId the ID of the network in the list of configured networks
     * @param disableOthers if true, disable all other networks. The way to
     * select a particular network to connect to is specify {@code true}
     * for this parameter.
     * @return {@code true} if the operation succeeded
     */
    public boolean enableNetwork(int netId, boolean disableOthers) {
        try {
            return mService.enableNetwork(netId, disableOthers);
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Disable a configured network. The specified network will not be
     * a candidate for associating. This may result in the asynchronous
     * delivery of state change events.
     * @param netId the ID of the network as returned by {@link #addNetwork}.
     * @return {@code true} if the operation succeeded
     */
    public boolean disableNetwork(int netId) {
        try {
            return mService.disableNetwork(netId);
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Disassociate from the currently active access point. This may result
     * in the asynchronous delivery of state change events.
     * @return {@code true} if the operation succeeded
     */
    public boolean disconnect() {
        try {
            mService.disconnect();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Reconnect to the currently active access point, if we are currently
     * disconnected. This may result in the asynchronous delivery of state
     * change events.
     * @return {@code true} if the operation succeeded
     */
    public boolean reconnect() {
        try {
            mService.reconnect();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Reconnect to the currently active access point, even if we are already
     * connected. This may result in the asynchronous delivery of state
     * change events.
     * @return {@code true} if the operation succeeded
     */
    public boolean reassociate() {
        try {
            mService.reassociate();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Check that the supplicant daemon is responding to requests.
     * @return {@code true} if we were able to communicate with the supplicant and
     * it returned the expected response to the PING message.
     */
    public boolean pingSupplicant() {
        if (mService == null)
            return false;
        try {
            return mService.pingSupplicant();
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Request a scan for access points. Returns immediately. The availability
     * of the results is made known later by means of an asynchronous event sent
     * on completion of the scan.
     * @return {@code true} if the operation succeeded, i.e., the scan was initiated
     */
    public boolean startScan() {
        try {
            mService.startScan(false);
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Request a scan for access points. Returns immediately. The availability
     * of the results is made known later by means of an asynchronous event sent
     * on completion of the scan.
     * This is a variant of startScan that forces an active scan, even if passive
     * scans are the current default
     * @return {@code true} if the operation succeeded, i.e., the scan was initiated
     *
     * @hide
     */
    public boolean startScanActive() {
        try {
            mService.startScan(true);
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Return dynamic information about the current Wi-Fi connection, if any is active.
     * @return the Wi-Fi information, contained in {@link WifiInfo}.
     */
    public WifiInfo getConnectionInfo() {
        try {
            return mService.getConnectionInfo();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Return the results of the latest access point scan.
     * @return the list of access points found in the most recent scan.
     */
    public List<ScanResult> getScanResults() {
        try {
            return mService.getScanResults();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Tell the supplicant to persist the current list of configured networks.
     * <p>
     * Note: It is possible for this method to change the network IDs of
     * existing networks. You should assume the network IDs can be different
     * after calling this method.
     *
     * @return {@code true} if the operation succeeded
     */
    public boolean saveConfiguration() {
        try {
            return mService.saveConfiguration();
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Set the country code.
     * @param countryCode country code in ISO 3166 format.
     * @param persist {@code true} if this needs to be remembered
     *
     * @hide
     */
    public void setCountryCode(String country, boolean persist) {
        try {
            mService.setCountryCode(country, persist);
        } catch (RemoteException e) { }
    }

    /**
     * Set the operational frequency band.
     * @param band  One of
     *     {@link #WIFI_FREQUENCY_BAND_AUTO},
     *     {@link #WIFI_FREQUENCY_BAND_5GHZ},
     *     {@link #WIFI_FREQUENCY_BAND_2GHZ},
     * @param persist {@code true} if this needs to be remembered
     * @hide
     */
    public void setFrequencyBand(int band, boolean persist) {
        try {
            mService.setFrequencyBand(band, persist);
        } catch (RemoteException e) { }
    }

    /**
     * Get the operational frequency band.
     * @return One of
     *     {@link #WIFI_FREQUENCY_BAND_AUTO},
     *     {@link #WIFI_FREQUENCY_BAND_5GHZ},
     *     {@link #WIFI_FREQUENCY_BAND_2GHZ} or
     *     {@code -1} on failure.
     * @hide
     */
    public int getFrequencyBand() {
        try {
            return mService.getFrequencyBand();
        } catch (RemoteException e) {
            return -1;
        }
    }

    /**
     * Check if the chipset supports dual frequency band (2.4 GHz and 5 GHz)
     * @return {@code true} if supported, {@code false} otherwise.
     * @hide
     */
    public boolean isDualBandSupported() {
        try {
            return mService.isDualBandSupported();
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Return the DHCP-assigned addresses from the last successful DHCP request,
     * if any.
     * @return the DHCP information
     */
    public DhcpInfo getDhcpInfo() {
        try {
            return mService.getDhcpInfo();
        } catch (RemoteException e) {
            return null;
        }
    }


    /**
     * Enable or disable Wi-Fi.
     * @param enabled {@code true} to enable, {@code false} to disable.
     * @return {@code true} if the operation succeeds (or if the existing state
     *         is the same as the requested state).
     */
    public boolean setWifiEnabled(boolean enabled) {
        try {
            return mService.setWifiEnabled(enabled);
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Gets the Wi-Fi enabled state.
     * @return One of {@link #WIFI_STATE_DISABLED},
     *         {@link #WIFI_STATE_DISABLING}, {@link #WIFI_STATE_ENABLED},
     *         {@link #WIFI_STATE_ENABLING}, {@link #WIFI_STATE_UNKNOWN}
     * @see #isWifiEnabled()
     */
    public int getWifiState() {
        try {
            return mService.getWifiEnabledState();
        } catch (RemoteException e) {
            return WIFI_STATE_UNKNOWN;
        }
    }

    /**
     * Return whether Wi-Fi is enabled or disabled.
     * @return {@code true} if Wi-Fi is enabled
     * @see #getWifiState()
     */
    public boolean isWifiEnabled() {
        return getWifiState() == WIFI_STATE_ENABLED;
    }

    /**
     * Calculates the level of the signal. This should be used any time a signal
     * is being shown.
     *
     * @param rssi The power of the signal measured in RSSI.
     * @param numLevels The number of levels to consider in the calculated
     *            level.
     * @return A level of the signal, given in the range of 0 to numLevels-1
     *         (both inclusive).
     */
    public static int calculateSignalLevel(int rssi, int numLevels) {
        if (rssi <= MIN_RSSI) {
            return 0;
        } else if (rssi >= MAX_RSSI) {
            return numLevels - 1;
        } else {
            float inputRange = (MAX_RSSI - MIN_RSSI);
            float outputRange = (numLevels - 1);
            return (int)((float)(rssi - MIN_RSSI) * outputRange / inputRange);
        }
    }

    /**
     * Compares two signal strengths.
     *
     * @param rssiA The power of the first signal measured in RSSI.
     * @param rssiB The power of the second signal measured in RSSI.
     * @return Returns <0 if the first signal is weaker than the second signal,
     *         0 if the two signals have the same strength, and >0 if the first
     *         signal is stronger than the second signal.
     */
    public static int compareSignalLevel(int rssiA, int rssiB) {
        return rssiA - rssiB;
    }

    /**
     * Start AccessPoint mode with the specified
     * configuration. If the radio is already running in
     * AP mode, update the new configuration
     * Note that starting in access point mode disables station
     * mode operation
     * @param wifiConfig SSID, security and channel details as
     *        part of WifiConfiguration
     * @return {@code true} if the operation succeeds, {@code false} otherwise
     *
     * @hide Dont open up yet
     */
    public boolean setWifiApEnabled(WifiConfiguration wifiConfig, boolean enabled) {
        try {
            mService.setWifiApEnabled(wifiConfig, enabled);
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Gets the Wi-Fi enabled state.
     * @return One of {@link #WIFI_AP_STATE_DISABLED},
     *         {@link #WIFI_AP_STATE_DISABLING}, {@link #WIFI_AP_STATE_ENABLED},
     *         {@link #WIFI_AP_STATE_ENABLING}, {@link #WIFI_AP_STATE_FAILED}
     * @see #isWifiApEnabled()
     *
     * @hide Dont open yet
     */
    public int getWifiApState() {
        try {
            return mService.getWifiApEnabledState();
        } catch (RemoteException e) {
            return WIFI_AP_STATE_FAILED;
        }
    }

    /**
     * Return whether Wi-Fi AP is enabled or disabled.
     * @return {@code true} if Wi-Fi AP is enabled
     * @see #getWifiApState()
     *
     * @hide Dont open yet
     */
    public boolean isWifiApEnabled() {
        return getWifiApState() == WIFI_AP_STATE_ENABLED;
    }

    /**
     * Gets the Wi-Fi AP Configuration.
     * @return AP details in WifiConfiguration
     *
     * @hide Dont open yet
     */
    public WifiConfiguration getWifiApConfiguration() {
        try {
            return mService.getWifiApConfiguration();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Sets the Wi-Fi AP Configuration.
     * @return {@code true} if the operation succeeded, {@code false} otherwise
     *
     * @hide Dont open yet
     */
    public boolean setWifiApConfiguration(WifiConfiguration wifiConfig) {
        try {
            mService.setWifiApConfiguration(wifiConfig);
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

   /**
     * Start the driver and connect to network.
     *
     * This function will over-ride WifiLock and device idle status. For example,
     * even if the device is idle or there is only a scan-only lock held,
     * a start wifi would mean that wifi connection is kept active until
     * a stopWifi() is sent.
     *
     * This API is used by WifiStateTracker
     *
     * @return {@code true} if the operation succeeds else {@code false}
     * @hide
     */
    public boolean startWifi() {
        try {
            mService.startWifi();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Disconnect from a network (if any) and stop the driver.
     *
     * This function will over-ride WifiLock and device idle status. Wi-Fi
     * stays inactive until a startWifi() is issued.
     *
     * This API is used by WifiStateTracker
     *
     * @return {@code true} if the operation succeeds else {@code false}
     * @hide
     */
    public boolean stopWifi() {
        try {
            mService.stopWifi();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Add a bssid to the supplicant blacklist
     *
     * This API is used by WifiWatchdogService
     *
     * @return {@code true} if the operation succeeds else {@code false}
     * @hide
     */
    public boolean addToBlacklist(String bssid) {
        try {
            mService.addToBlacklist(bssid);
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Clear the supplicant blacklist
     *
     * This API is used by WifiWatchdogService
     *
     * @return {@code true} if the operation succeeds else {@code false}
     * @hide
     */
    public boolean clearBlacklist() {
        try {
            mService.clearBlacklist();
            return true;
        } catch (RemoteException e) {
            return false;
        }
    }

    /* TODO: deprecate synchronous API and open up the following API */

    private static final int BASE = Protocol.BASE_WIFI_MANAGER;

    /* Commands to WifiService */
    /** @hide */
    public static final int CONNECT_NETWORK                 = BASE + 1;
    /** @hide */
    public static final int CONNECT_NETWORK_FAILED          = BASE + 2;
    /** @hide */
    public static final int CONNECT_NETWORK_SUCCEEDED       = BASE + 3;

    /** @hide */
    public static final int FORGET_NETWORK                  = BASE + 4;
    /** @hide */
    public static final int FORGET_NETWORK_FAILED           = BASE + 5;
    /** @hide */
    public static final int FORGET_NETWORK_SUCCEEDED        = BASE + 6;

    /** @hide */
    public static final int SAVE_NETWORK                    = BASE + 7;
    /** @hide */
    public static final int SAVE_NETWORK_FAILED             = BASE + 8;
    /** @hide */
    public static final int SAVE_NETWORK_SUCCEEDED          = BASE + 9;

    /** @hide */
    public static final int START_WPS                       = BASE + 10;
    /** @hide */
    public static final int START_WPS_SUCCEEDED             = BASE + 11;
    /** @hide */
    public static final int WPS_FAILED                      = BASE + 12;
   /** @hide */
    public static final int WPS_COMPLETED                   = BASE + 13;

    /** @hide */
    public static final int DISABLE_NETWORK                 = BASE + 14;
    /** @hide */
    public static final int DISABLE_NETWORK_FAILED          = BASE + 15;
    /** @hide */
    public static final int DISABLE_NETWORK_SUCCEEDED       = BASE + 16;

    /* For system use only */
    /** @hide */
    public static final int ENABLE_TRAFFIC_STATS_POLL       = BASE + 21;
    /** @hide */
    public static final int TRAFFIC_STATS_POLL              = BASE + 22;


    /**
     * Passed with {@link ActionListener#onFailure}.
     * Indicates that the operation failed due to an internal error.
     * @hide
     */
    public static final int ERROR               = 0;

    /**
     * Passed with {@link ActionListener#onFailure}.
     * Indicates that the operation is already in progress
     * @hide
     */
    public static final int IN_PROGRESS         = 1;

    /**
     * Passed with {@link ActionListener#onFailure}.
     * Indicates that the operation failed because the framework is busy and
     * unable to service the request
     * @hide
     */
    public static final int BUSY                = 2;

    /* WPS specific errors */
    /** WPS overlap detected {@hide} */
    public static final int WPS_OVERLAP_ERROR   = 3;

    /** Interface for callback invocation when framework channel is lost {@hide} */
    public interface ChannelListener {
        /**
         * The channel to the framework has been disconnected.
         * Application could try re-initializing using {@link #initialize}
         */
        public void onChannelDisconnected();
    }

    /** Interface for callback invocation on an application action {@hide} */
    public interface ActionListener {
        /** The operation succeeded */
        public void onSuccess();
        /**
         * The operation failed
         * @param reason The reason for failure could be one of
         * {@link #ERROR}, {@link #IN_PROGRESS} or {@link #BUSY}
         */
        public void onFailure(int reason);
    }

    /** Interface for callback invocation on a start WPS action {@hide} */
    public interface WpsListener {
        /** WPS start succeeded */
        public void onStartSuccess(String pin);

        /** WPS operation completed succesfully */
        public void onCompletion();

        /**
         * WPS operation failed
         * @param reason The reason for failure could be one of
         * {@link #IN_PROGRESS}, {@link #WPS_OVERLAP_ERROR},{@link #ERROR} or {@link #BUSY}
         */
        public void onFailure(int reason);
    }

    /**
     * A channel that connects the application to the Wifi framework.
     * Most operations require a Channel as an argument. An instance of Channel is obtained
     * by doing a call on {@link #initialize}
     * @hide
     */
    public static class Channel {
        Channel(Looper looper, ChannelListener l) {
            mAsyncChannel = new AsyncChannel();
            mHandler = new WifiHandler(looper);
            mChannelListener = l;
        }
        private ChannelListener mChannelListener;
        private SparseArray<Object> mListenerMap = new SparseArray<Object>();
        private Object mListenerMapLock = new Object();
        private int mListenerKey = 0;

        AsyncChannel mAsyncChannel;
        WifiHandler mHandler;
        class WifiHandler extends Handler {
            WifiHandler(Looper looper) {
                super(looper);
            }

            @Override
            public void handleMessage(Message message) {
                Object listener = removeListener(message.arg2);
                switch (message.what) {
                    case AsyncChannel.CMD_CHANNEL_DISCONNECTED:
                        if (mChannelListener != null) {
                            mChannelListener.onChannelDisconnected();
                            mChannelListener = null;
                        }
                        break;
                        /* ActionListeners grouped together */
                    case WifiManager.CONNECT_NETWORK_FAILED:
                    case WifiManager.FORGET_NETWORK_FAILED:
                    case WifiManager.SAVE_NETWORK_FAILED:
                    case WifiManager.DISABLE_NETWORK_FAILED:
                        if (listener != null) {
                            ((ActionListener) listener).onFailure(message.arg1);
                        }
                        break;
                        /* ActionListeners grouped together */
                    case WifiManager.CONNECT_NETWORK_SUCCEEDED:
                    case WifiManager.FORGET_NETWORK_SUCCEEDED:
                    case WifiManager.SAVE_NETWORK_SUCCEEDED:
                    case WifiManager.DISABLE_NETWORK_SUCCEEDED:
                        if (listener != null) {
                            ((ActionListener) listener).onSuccess();
                        }
                        break;
                    case WifiManager.START_WPS_SUCCEEDED:
                        if (listener != null) {
                            WpsResult result = (WpsResult) message.obj;
                            ((WpsListener) listener).onStartSuccess(result.pin);
                            //Listener needs to stay until completion or failure
                            synchronized(mListenerMapLock) {
                                mListenerMap.put(message.arg2, listener);
                            }
                        }
                        break;
                    case WifiManager.WPS_COMPLETED:
                        if (listener != null) {
                            ((WpsListener) listener).onCompletion();
                        }
                        break;
                    case WifiManager.WPS_FAILED:
                        if (listener != null) {
                            ((WpsListener) listener).onFailure(message.arg1);
                        }
                        break;
                    default:
                        //ignore
                        break;
                }
            }
        }

        int putListener(Object listener) {
            if (listener == null) return 0;
            int key;
            synchronized (mListenerMapLock) {
                key = mListenerKey++;
                mListenerMap.put(key, listener);
            }
            return key;
        }

        Object removeListener(int key) {
            synchronized (mListenerMapLock) {
                Object listener = mListenerMap.get(key);
                mListenerMap.remove(key);
                return listener;
            }
        }
    }

    /**
     * Registers the application with the Wi-Fi framework. This function
     * must be the first to be called before any Wi-Fi operations are performed.
     *
     * @param srcContext is the context of the source
     * @param srcLooper is the Looper on which the callbacks are receivied
     * @param listener for callback at loss of framework communication. Can be null.
     * @return Channel instance that is necessary for performing any further Wi-Fi operations.
     *         A null is returned upon failure to initialize.
     * @hide
     */
    public Channel initialize(Context srcContext, Looper srcLooper, ChannelListener listener) {
        Messenger messenger = getWifiServiceMessenger();
        if (messenger == null) return null;

        Channel c = new Channel(srcLooper, listener);
        if (c.mAsyncChannel.connectSync(srcContext, c.mHandler, messenger)
                == AsyncChannel.STATUS_SUCCESSFUL) {
            return c;
        } else {
            return null;
        }
    }

    /**
     * Connect to a network with the given configuration. The network also
     * gets added to the supplicant configuration.
     *
     * For a new network, this function is used instead of a
     * sequence of addNetwork(), enableNetwork(), saveConfiguration() and
     * reconnect()
     *
     * @param c is the channel created at {@link #initialize}
     * @param config the set of variables that describe the configuration,
     *            contained in a {@link WifiConfiguration} object.
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void connect(Channel c, WifiConfiguration config, ActionListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (config == null) throw new IllegalArgumentException("config cannot be null");

        c.mAsyncChannel.sendMessage(CONNECT_NETWORK, 0, c.putListener(listener), config);
    }

    /**
     * Connect to a network with the given networkId.
     *
     * This function is used instead of a enableNetwork(), saveConfiguration() and
     * reconnect()
     *
     * @param c is the channel created at {@link #initialize}
     * @param networkId the network id identifiying the network in the
     *                supplicant configuration list
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void connect(Channel c, int networkId, ActionListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (networkId < 0) throw new IllegalArgumentException("Network id cannot be negative");

        c.mAsyncChannel.sendMessage(CONNECT_NETWORK, networkId, c.putListener(listener));
    }

    /**
     * Save the given network in the supplicant config. If the network already
     * exists, the configuration is updated. A new network is enabled
     * by default.
     *
     * For a new network, this function is used instead of a
     * sequence of addNetwork(), enableNetwork() and saveConfiguration().
     *
     * For an existing network, it accomplishes the task of updateNetwork()
     * and saveConfiguration()
     *
     * @param c is the channel created at {@link #initialize}
     * @param config the set of variables that describe the configuration,
     *            contained in a {@link WifiConfiguration} object.
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void save(Channel c, WifiConfiguration config, ActionListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (config == null) throw new IllegalArgumentException("config cannot be null");

        c.mAsyncChannel.sendMessage(SAVE_NETWORK, 0, c.putListener(listener), config);
    }

    /**
     * Delete the network in the supplicant config.
     *
     * This function is used instead of a sequence of removeNetwork()
     * and saveConfiguration().
     *
     * @param c is the channel created at {@link #initialize}
     * @param config the set of variables that describe the configuration,
     *            contained in a {@link WifiConfiguration} object.
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void forget(Channel c, int netId, ActionListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (netId < 0) throw new IllegalArgumentException("Network id cannot be negative");

        c.mAsyncChannel.sendMessage(FORGET_NETWORK, netId, c.putListener(listener));
    }

    /**
     * Disable network
     *
     * @param c is the channel created at {@link #initialize}
     * @param netId is the network Id
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void disable(Channel c, int netId, ActionListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (netId < 0) throw new IllegalArgumentException("Network id cannot be negative");

        c.mAsyncChannel.sendMessage(DISABLE_NETWORK, netId, c.putListener(listener));
    }

    /**
     * Start Wi-fi Protected Setup
     *
     * @param c is the channel created at {@link #initialize}
     * @param config WPS configuration
     * @param listener for callbacks on success or failure. Can be null.
     * @hide
     */
    public void startWps(Channel c, WpsInfo config, WpsListener listener) {
        if (c == null) throw new IllegalArgumentException("Channel needs to be initialized");
        if (config == null) throw new IllegalArgumentException("config cannot be null");

        c.mAsyncChannel.sendMessage(START_WPS, 0, c.putListener(listener), config);
    }

    /**
     * Get a reference to WifiService handler. This is used by a client to establish
     * an AsyncChannel communication with WifiService
     *
     * @return Messenger pointing to the WifiService handler
     * @hide
     */
    public Messenger getWifiServiceMessenger() {
        try {
            return mService.getWifiServiceMessenger();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Get a reference to WifiStateMachine handler.
     * @return Messenger pointing to the WifiService handler
     * @hide
     */
    public Messenger getWifiStateMachineMessenger() {
        try {
            return mService.getWifiStateMachineMessenger();
        } catch (RemoteException e) {
            return null;
        }
    }



    /**
     * Returns the file in which IP and proxy configuration data is stored
     * @hide
     */
    public String getConfigFile() {
        try {
            return mService.getConfigFile();
        } catch (RemoteException e) {
            return null;
        }
    }

    /**
     * Allows an application to keep the Wi-Fi radio awake.
     * Normally the Wi-Fi radio may turn off when the user has not used the device in a while.
     * Acquiring a WifiLock will keep the radio on until the lock is released.  Multiple
     * applications may hold WifiLocks, and the radio will only be allowed to turn off when no
     * WifiLocks are held in any application.
     * <p>
     * Before using a WifiLock, consider carefully if your application requires Wi-Fi access, or
     * could function over a mobile network, if available.  A program that needs to download large
     * files should hold a WifiLock to ensure that the download will complete, but a program whose
     * network usage is occasional or low-bandwidth should not hold a WifiLock to avoid adversely
     * affecting battery life.
     * <p>
     * Note that WifiLocks cannot override the user-level "Wi-Fi Enabled" setting, nor Airplane
     * Mode.  They simply keep the radio from turning off when Wi-Fi is already on but the device
     * is idle.
     * <p>
     * Any application using a WifiLock must request the {@code android.permission.WAKE_LOCK}
     * permission in an {@code &lt;uses-permission&gt;} element of the application's manifest.
     */
    public class WifiLock {
        private String mTag;
        private final IBinder mBinder;
        private int mRefCount;
        int mLockType;
        private boolean mRefCounted;
        private boolean mHeld;
        private WorkSource mWorkSource;

        private WifiLock(int lockType, String tag) {
            mTag = tag;
            mLockType = lockType;
            mBinder = new Binder();
            mRefCount = 0;
            mRefCounted = true;
            mHeld = false;
        }

        /**
         * Locks the Wi-Fi radio on until {@link #release} is called.
         *
         * If this WifiLock is reference-counted, each call to {@code acquire} will increment the
         * reference count, and the radio will remain locked as long as the reference count is
         * above zero.
         *
         * If this WifiLock is not reference-counted, the first call to {@code acquire} will lock
         * the radio, but subsequent calls will be ignored.  Only one call to {@link #release}
         * will be required, regardless of the number of times that {@code acquire} is called.
         */
        public void acquire() {
            synchronized (mBinder) {
                if (mRefCounted ? (++mRefCount > 0) : (!mHeld)) {
                    try {
                        mService.acquireWifiLock(mBinder, mLockType, mTag, mWorkSource);
                        synchronized (WifiManager.this) {
                            if (mActiveLockCount >= MAX_ACTIVE_LOCKS) {
                                mService.releaseWifiLock(mBinder);
                                throw new UnsupportedOperationException(
                                            "Exceeded maximum number of wifi locks");
                            }
                            mActiveLockCount++;
                        }
                    } catch (RemoteException ignore) {
                    }
                    mHeld = true;
                }
            }
        }

        /**
         * Unlocks the Wi-Fi radio, allowing it to turn off when the device is idle.
         *
         * If this WifiLock is reference-counted, each call to {@code release} will decrement the
         * reference count, and the radio will be unlocked only when the reference count reaches
         * zero.  If the reference count goes below zero (that is, if {@code release} is called
         * a greater number of times than {@link #acquire}), an exception is thrown.
         *
         * If this WifiLock is not reference-counted, the first call to {@code release} (after
         * the radio was locked using {@link #acquire}) will unlock the radio, and subsequent
         * calls will be ignored.
         */
        public void release() {
            synchronized (mBinder) {
                if (mRefCounted ? (--mRefCount == 0) : (mHeld)) {
                    try {
                        mService.releaseWifiLock(mBinder);
                        synchronized (WifiManager.this) {
                            mActiveLockCount--;
                        }
                    } catch (RemoteException ignore) {
                    }
                    mHeld = false;
                }
                if (mRefCount < 0) {
                    throw new RuntimeException("WifiLock under-locked " + mTag);
                }
            }
        }

        /**
         * Controls whether this is a reference-counted or non-reference-counted WifiLock.
         *
         * Reference-counted WifiLocks keep track of the number of calls to {@link #acquire} and
         * {@link #release}, and only allow the radio to sleep when every call to {@link #acquire}
         * has been balanced with a call to {@link #release}.  Non-reference-counted WifiLocks
         * lock the radio whenever {@link #acquire} is called and it is unlocked, and unlock the
         * radio whenever {@link #release} is called and it is locked.
         *
         * @param refCounted true if this WifiLock should keep a reference count
         */
        public void setReferenceCounted(boolean refCounted) {
            mRefCounted = refCounted;
        }

        /**
         * Checks whether this WifiLock is currently held.
         *
         * @return true if this WifiLock is held, false otherwise
         */
        public boolean isHeld() {
            synchronized (mBinder) {
                return mHeld;
            }
        }

        public void setWorkSource(WorkSource ws) {
            synchronized (mBinder) {
                if (ws != null && ws.size() == 0) {
                    ws = null;
                }
                boolean changed = true;
                if (ws == null) {
                    mWorkSource = null;
                } else if (mWorkSource == null) {
                    changed = mWorkSource != null;
                    mWorkSource = new WorkSource(ws);
                } else {
                    changed = mWorkSource.diff(ws);
                    if (changed) {
                        mWorkSource.set(ws);
                    }
                }
                if (changed && mHeld) {
                    try {
                        mService.updateWifiLockWorkSource(mBinder, mWorkSource);
                    } catch (RemoteException e) {
                    }
                }
            }
        }

        public String toString() {
            String s1, s2, s3;
            synchronized (mBinder) {
                s1 = Integer.toHexString(System.identityHashCode(this));
                s2 = mHeld ? "held; " : "";
                if (mRefCounted) {
                    s3 = "refcounted: refcount = " + mRefCount;
                } else {
                    s3 = "not refcounted";
                }
                return "WifiLock{ " + s1 + "; " + s2 + s3 + " }";
            }
        }

        @Override
        protected void finalize() throws Throwable {
            super.finalize();
            synchronized (mBinder) {
                if (mHeld) {
                    try {
                        mService.releaseWifiLock(mBinder);
                        synchronized (WifiManager.this) {
                            mActiveLockCount--;
                        }
                    } catch (RemoteException ignore) {
                    }
                }
            }
        }
    }

    /**
     * Creates a new WifiLock.
     *
     * @param lockType the type of lock to create. See {@link #WIFI_MODE_FULL},
     * {@link #WIFI_MODE_FULL_HIGH_PERF} and {@link #WIFI_MODE_SCAN_ONLY} for
     * descriptions of the types of Wi-Fi locks.
     * @param tag a tag for the WifiLock to identify it in debugging messages.  This string is
     *            never shown to the user under normal conditions, but should be descriptive
     *            enough to identify your application and the specific WifiLock within it, if it
     *            holds multiple WifiLocks.
     *
     * @return a new, unacquired WifiLock with the given tag.
     *
     * @see WifiLock
     */
    public WifiLock createWifiLock(int lockType, String tag) {
        return new WifiLock(lockType, tag);
    }

    /**
     * Creates a new WifiLock.
     *
     * @param tag a tag for the WifiLock to identify it in debugging messages.  This string is
     *            never shown to the user under normal conditions, but should be descriptive
     *            enough to identify your application and the specific WifiLock within it, if it
     *            holds multiple WifiLocks.
     *
     * @return a new, unacquired WifiLock with the given tag.
     *
     * @see WifiLock
     */
    public WifiLock createWifiLock(String tag) {
        return new WifiLock(WIFI_MODE_FULL, tag);
    }


    /**
     * Create a new MulticastLock
     *
     * @param tag a tag for the MulticastLock to identify it in debugging
     *            messages.  This string is never shown to the user under
     *            normal conditions, but should be descriptive enough to
     *            identify your application and the specific MulticastLock
     *            within it, if it holds multiple MulticastLocks.
     *
     * @return a new, unacquired MulticastLock with the given tag.
     *
     * @see MulticastLock
     */
    public MulticastLock createMulticastLock(String tag) {
        return new MulticastLock(tag);
    }

    /**
     * Allows an application to receive Wifi Multicast packets.
     * Normally the Wifi stack filters out packets not explicitly
     * addressed to this device.  Acquring a MulticastLock will
     * cause the stack to receive packets addressed to multicast
     * addresses.  Processing these extra packets can cause a noticable
     * battery drain and should be disabled when not needed.
     */
    public class MulticastLock {
        private String mTag;
        private final IBinder mBinder;
        private int mRefCount;
        private boolean mRefCounted;
        private boolean mHeld;

        private MulticastLock(String tag) {
            mTag = tag;
            mBinder = new Binder();
            mRefCount = 0;
            mRefCounted = true;
            mHeld = false;
        }

        /**
         * Locks Wifi Multicast on until {@link #release} is called.
         *
         * If this MulticastLock is reference-counted each call to
         * {@code acquire} will increment the reference count, and the
         * wifi interface will receive multicast packets as long as the
         * reference count is above zero.
         *
         * If this MulticastLock is not reference-counted, the first call to
         * {@code acquire} will turn on the multicast packets, but subsequent
         * calls will be ignored.  Only one call to {@link #release} will
         * be required, regardless of the number of times that {@code acquire}
         * is called.
         *
         * Note that other applications may also lock Wifi Multicast on.
         * Only they can relinquish their lock.
         *
         * Also note that applications cannot leave Multicast locked on.
         * When an app exits or crashes, any Multicast locks will be released.
         */
        public void acquire() {
            synchronized (mBinder) {
                if (mRefCounted ? (++mRefCount > 0) : (!mHeld)) {
                    try {
                        mService.acquireMulticastLock(mBinder, mTag);
                        synchronized (WifiManager.this) {
                            if (mActiveLockCount >= MAX_ACTIVE_LOCKS) {
                                mService.releaseMulticastLock();
                                throw new UnsupportedOperationException(
                                        "Exceeded maximum number of wifi locks");
                            }
                            mActiveLockCount++;
                        }
                    } catch (RemoteException ignore) {
                    }
                    mHeld = true;
                }
            }
        }

        /**
         * Unlocks Wifi Multicast, restoring the filter of packets
         * not addressed specifically to this device and saving power.
         *
         * If this MulticastLock is reference-counted, each call to
         * {@code release} will decrement the reference count, and the
         * multicast packets will only stop being received when the reference
         * count reaches zero.  If the reference count goes below zero (that
         * is, if {@code release} is called a greater number of times than
         * {@link #acquire}), an exception is thrown.
         *
         * If this MulticastLock is not reference-counted, the first call to
         * {@code release} (after the radio was multicast locked using
         * {@link #acquire}) will unlock the multicast, and subsequent calls
         * will be ignored.
         *
         * Note that if any other Wifi Multicast Locks are still outstanding
         * this {@code release} call will not have an immediate effect.  Only
         * when all applications have released all their Multicast Locks will
         * the Multicast filter be turned back on.
         *
         * Also note that when an app exits or crashes all of its Multicast
         * Locks will be automatically released.
         */
        public void release() {
            synchronized (mBinder) {
                if (mRefCounted ? (--mRefCount == 0) : (mHeld)) {
                    try {
                        mService.releaseMulticastLock();
                        synchronized (WifiManager.this) {
                            mActiveLockCount--;
                        }
                    } catch (RemoteException ignore) {
                    }
                    mHeld = false;
                }
                if (mRefCount < 0) {
                    throw new RuntimeException("MulticastLock under-locked "
                            + mTag);
                }
            }
        }

        /**
         * Controls whether this is a reference-counted or non-reference-
         * counted MulticastLock.
         *
         * Reference-counted MulticastLocks keep track of the number of calls
         * to {@link #acquire} and {@link #release}, and only stop the
         * reception of multicast packets when every call to {@link #acquire}
         * has been balanced with a call to {@link #release}.  Non-reference-
         * counted MulticastLocks allow the reception of multicast packets
         * whenever {@link #acquire} is called and stop accepting multicast
         * packets whenever {@link #release} is called.
         *
         * @param refCounted true if this MulticastLock should keep a reference
         * count
         */
        public void setReferenceCounted(boolean refCounted) {
            mRefCounted = refCounted;
        }

        /**
         * Checks whether this MulticastLock is currently held.
         *
         * @return true if this MulticastLock is held, false otherwise
         */
        public boolean isHeld() {
            synchronized (mBinder) {
                return mHeld;
            }
        }

        public String toString() {
            String s1, s2, s3;
            synchronized (mBinder) {
                s1 = Integer.toHexString(System.identityHashCode(this));
                s2 = mHeld ? "held; " : "";
                if (mRefCounted) {
                    s3 = "refcounted: refcount = " + mRefCount;
                } else {
                    s3 = "not refcounted";
                }
                return "MulticastLock{ " + s1 + "; " + s2 + s3 + " }";
            }
        }

        @Override
        protected void finalize() throws Throwable {
            super.finalize();
            setReferenceCounted(false);
            release();
        }
    }

    /**
     * Check multicast filter status.
     *
     * @return true if multicast packets are allowed.
     *
     * @hide pending API council approval
     */
    public boolean isMulticastEnabled() {
        try {
            return mService.isMulticastEnabled();
        } catch (RemoteException e) {
            return false;
        }
    }

    /**
     * Initialize the multicast filtering to 'on'
     * @hide no intent to publish
     */
    public boolean initializeMulticastFiltering() {
        try {
            mService.initializeMulticastFiltering();
            return true;
        } catch (RemoteException e) {
             return false;
        }
    }
}