main.mk revision 2f31293ba78695cb48ac5a1cab835197ace58d47
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128## user/userdebug ## 129 130user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 131enable_target_debugging := true 132ifneq (,$(user_variant)) 133 # Target is secure in user builds. 134 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 135 136 tags_to_install := user 137 ifeq ($(user_variant),userdebug) 138 # Pick up some extra useful tools 139 tags_to_install += debug 140 else 141 # Disable debugging in plain user builds. 142 enable_target_debugging := 143 endif 144 145 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 146 # Also, remove the corresponding block in config/product_config.make. 147 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 148 WITH_DEXPREOPT := true 149 endif 150 151 # Disallow mock locations by default for user builds 152 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 153 154else # !user_variant 155 # Turn on checkjni for non-user builds. 156 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 157 # Set device insecure for non-user builds. 158 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 159 # Allow mock locations by default for non user builds 160 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 161endif # !user_variant 162 163ifeq (true,$(strip $(enable_target_debugging))) 164 # Target is more debuggable and adbd is on by default 165 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 166 # Include the debugging/testing OTA keys in this build. 167 INCLUDE_TEST_OTA_KEYS := true 168else # !enable_target_debugging 169 # Target is less debuggable and adbd is off by default 170 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 171endif # !enable_target_debugging 172 173## eng ## 174 175ifeq ($(TARGET_BUILD_VARIANT),eng) 176tags_to_install := user debug eng 177endif 178 179## tests ## 180 181ifeq ($(TARGET_BUILD_VARIANT),tests) 182tags_to_install := user debug eng tests 183endif 184 185## sdk ## 186 187ifneq ($(filter sdk,$(MAKECMDGOALS)),) 188ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 189$(error The 'sdk' target may not be specified with any other targets) 190endif 191# TODO: this should be eng I think. Since the sdk is built from the eng 192# variant. 193tags_to_install := user 194ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 195ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 196else # !sdk 197# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 198ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 199endif 200 201ifeq "" "$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))" 202 # Install an apns-conf.xml file if one's not already being installed. 203 PRODUCT_COPY_FILES += development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 204 ifeq ($(filter sdk,$(MAKECMDGOALS)),) 205 $(warning implicitly installing apns-conf_sdk.xml) 206 endif 207endif 208 209ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 210 211# enable vm tracing in files for now to help track 212# the cause of ANRs in the content process 213ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 214 215 216# ------------------------------------------------------------ 217# Define a function that, given a list of module tags, returns 218# non-empty if that module should be installed in /system. 219 220# For most goals, anything not tagged with the "tests" tag should 221# be installed in /system. 222define should-install-to-system 223$(if $(filter tests,$(1)),,true) 224endef 225 226ifneq (,$(filter sdk,$(MAKECMDGOALS))) 227# For the sdk goal, anything with the "samples" tag should be 228# installed in /data even if that module also has "eng"/"debug"/"user". 229define should-install-to-system 230$(if $(filter samples tests,$(1)),,true) 231endef 232endif 233 234 235# If all they typed was make showcommands, we'll actually build 236# the default target. 237ifeq ($(MAKECMDGOALS),showcommands) 238.PHONY: showcommands 239showcommands: $(DEFAULT_GOAL) 240endif 241 242# These targets are going to delete stuff, don't bother including 243# the whole directory tree if that's all we're going to do 244ifeq ($(MAKECMDGOALS),clean) 245dont_bother := true 246endif 247ifeq ($(MAKECMDGOALS),clobber) 248dont_bother := true 249endif 250ifeq ($(MAKECMDGOALS),dataclean) 251dont_bother := true 252endif 253ifeq ($(MAKECMDGOALS),installclean) 254dont_bother := true 255endif 256 257# Bring in all modules that need to be built. 258ifneq ($(dont_bother),true) 259 260subdir_makefiles := 261 262ifeq ($(HOST_OS),windows) 263SDK_ONLY := true 264endif 265ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 266SDK_ONLY := true 267endif 268 269ifeq ($(SDK_ONLY),true) 270 271subdirs := \ 272 prebuilt \ 273 build/libs/host \ 274 dalvik/dexdump \ 275 dalvik/libdex \ 276 dalvik/tools/dmtracedump \ 277 development/emulator/mksdcard \ 278 development/tools/activitycreator \ 279 development/tools/line_endings \ 280 development/host \ 281 external/expat \ 282 external/libpng \ 283 external/qemu \ 284 external/sqlite/dist \ 285 external/zlib \ 286 frameworks/base/libs/utils \ 287 frameworks/base/tools/aapt \ 288 frameworks/base/tools/aidl \ 289 system/core/adb \ 290 system/core/fastboot \ 291 system/core/libcutils \ 292 system/core/liblog \ 293 system/core/libzipfile 294 295# The following can only be built if "javac" is available. 296# This check is used when building parts of the SDK under Cygwin. 297ifneq (,$(shell which javac 2>/dev/null)) 298$(warning sdk-only: javac available.) 299subdirs += \ 300 build/tools/signapk \ 301 build/tools/zipalign \ 302 dalvik/dx \ 303 dalvik/libcore \ 304 development/apps \ 305 development/tools/androidprefs \ 306 development/tools/apkbuilder \ 307 development/tools/jarutils \ 308 development/tools/layoutlib_utils \ 309 development/tools/ninepatch \ 310 development/tools/sdkstats \ 311 development/tools/sdkmanager \ 312 frameworks/base \ 313 frameworks/base/tools/layoutlib \ 314 external/googleclient \ 315 packages 316else 317$(warning sdk-only: javac not available.) 318endif 319 320# Exclude tools/acp when cross-compiling windows under linux 321ifeq ($(findstring Linux,$(UNAME)),) 322subdirs += build/tools/acp 323endif 324 325else # !SDK_ONLY 326ifeq ($(BUILD_TINY_ANDROID), true) 327 328# TINY_ANDROID is a super-minimal build configuration, handy for board 329# bringup and very low level debugging 330 331INTERNAL_DEFAULT_DOCS_TARGETS := 332 333subdirs := \ 334 bionic \ 335 system/core \ 336 build/libs \ 337 build/target \ 338 build/tools/acp \ 339 build/tools/apriori \ 340 build/tools/kcm \ 341 build/tools/soslim \ 342 external/elfcopy \ 343 external/elfutils \ 344 external/yaffs2 \ 345 external/zlib 346else # !BUILD_TINY_ANDROID 347 348# 349# Typical build; include any Android.mk files we can find. 350# 351INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 352subdirs := $(TOP) 353 354FULL_BUILD := true 355 356endif # !BUILD_TINY_ANDROID 357 358endif # !SDK_ONLY 359 360# Can't use first-makefiles-under here because 361# --mindepth=2 makes the prunes not work. 362subdir_makefiles += \ 363 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 364 365# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 366# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 367# make sure only one exists. 368# Real boards should always be associated with an OEM vendor. 369board_config_mk := \ 370 $(strip $(wildcard \ 371 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 372 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 373 )) 374ifeq ($(board_config_mk),) 375 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 376endif 377ifneq ($(words $(board_config_mk)),1) 378 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 379endif 380include $(board_config_mk) 381TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 382board_config_mk := 383 384# Clean up/verify variables defined by the board config file. 385TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 386 387# 388# Include all of the makefiles in the system 389# 390 391ifneq ($(ONE_SHOT_MAKEFILE),) 392# We've probably been invoked by the "mm" shell function 393# with a subdirectory's makefile. 394include $(ONE_SHOT_MAKEFILE) 395# Change CUSTOM_MODULES to include only modules that were 396# defined by this makefile; this will install all of those 397# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 398# so that the modules will be installed in the same place they 399# would have been with a normal make. 400CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 401FULL_BUILD := 402INTERNAL_DEFAULT_DOCS_TARGETS := 403# Stub out the notice targets, which probably aren't defined 404# when using ONE_SHOT_MAKEFILE. 405NOTICE-HOST-%: ; 406NOTICE-TARGET-%: ; 407else 408include $(subdir_makefiles) 409endif 410# ------------------------------------------------------------------- 411# All module makefiles have been included at this point. 412# ------------------------------------------------------------------- 413 414# ------------------------------------------------------------------- 415# Include any makefiles that must happen after the module makefiles 416# have been included. 417# TODO: have these files register themselves via a global var rather 418# than hard-coding the list here. 419ifdef FULL_BUILD 420 # Only include this during a full build, otherwise we can't be 421 # guaranteed that any policies were included. 422 -include frameworks/policies/base/PolicyConfig.mk 423endif 424 425# ------------------------------------------------------------------- 426# Fix up CUSTOM_MODULES to refer to installed files rather than 427# just bare module names. Leave unknown modules alone in case 428# they're actually full paths to a particular file. 429known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 430unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 431CUSTOM_MODULES := \ 432 $(call module-installed-files,$(known_custom_modules)) \ 433 $(unknown_custom_modules) 434 435# ------------------------------------------------------------------- 436# Define dependencies for modules that require other modules. 437# This can only happen now, after we've read in all module makefiles. 438# 439# TODO: deal with the fact that a bare module name isn't 440# unambiguous enough. Maybe declare short targets like 441# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 442# BUG: the system image won't know to depend on modules that are 443# brought in as requirements of other modules. 444define add-required-deps 445$(1): $(2) 446endef 447$(foreach m,$(ALL_MODULES), \ 448 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 449 $(if $(r), \ 450 $(eval r := $(call module-installed-files,$(r))) \ 451 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 452 ) \ 453 ) 454m := 455r := 456add-required-deps := 457 458# ------------------------------------------------------------------- 459# Figure out our module sets. 460 461# Of the modules defined by the component makefiles, 462# determine what we actually want to build. 463# If a module has the "restricted" tag on it, it 464# poisons the rest of the tags and shouldn't appear 465# on any list. 466Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 467 $(ALL_BUILT_MODULES) \ 468 $(CUSTOM_MODULES)) 469# TODO: Remove the 3 places in the tree that use 470# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 471 472ifdef FULL_BUILD 473 # The base list of modules to build for this product is specified 474 # by the appropriate product definition file, which was included 475 # by product_config.make. 476 user_PACKAGES := $(call module-installed-files, \ 477 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 478 ifeq (0,1) 479 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 480 $(foreach p,$(user_PACKAGES),$(info : $(p))) 481 $(error done) 482 endif 483else 484 # We're not doing a full build, and are probably only including 485 # a subset of the module makefiles. Don't try to build any modules 486 # requested by the product, because we probably won't have rules 487 # to build them. 488 user_PACKAGES := 489endif 490# Use tags to get the non-APPS user modules. Use the product 491# definition files to get the APPS user modules. 492user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 493user_MODULES := $(user_MODULES) $(user_PACKAGES) 494 495eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 496debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 497tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 498 499ifeq ($(strip $(tags_to_install)),) 500$(error ASSERTION FAILED: tags_to_install should not be empty) 501endif 502modules_to_install := $(sort $(Default_MODULES) \ 503 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 504 505# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 506# Filter out (do not install) any overridden packages. 507overridden_packages := $(call get-package-overrides,$(modules_to_install)) 508ifdef overridden_packages 509# old_modules_to_install := $(modules_to_install) 510 modules_to_install := \ 511 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 512 $(modules_to_install)) 513endif 514#$(error filtered out 515# $(filter-out $(modules_to_install),$(old_modules_to_install))) 516 517# Don't include any GNU targets in the SDK. It's ok (and necessary) 518# to build the host tools, but nothing that's going to be installed 519# on the target (including static libraries). 520ifneq ($(filter sdk,$(MAKECMDGOALS)),) 521 target_gnu_MODULES := \ 522 $(filter \ 523 $(TARGET_OUT_INTERMEDIATES)/% \ 524 $(TARGET_OUT)/% \ 525 $(TARGET_OUT_DATA)/%, \ 526 $(sort $(call get-tagged-modules,gnu))) 527 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 528 modules_to_install := \ 529 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 530endif 531 532 533# config/Makefile contains extra stuff that we don't want to pollute this 534# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 535# contains everything that's built during the current make, but it also further 536# extends ALL_DEFAULT_INSTALLED_MODULES. 537ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 538include $(BUILD_SYSTEM)/Makefile 539modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 540ALL_DEFAULT_INSTALLED_MODULES := 541 542endif # dont_bother 543 544# ------------------------------------------------------------------- 545# This is used to to get the ordering right, you can also use these, 546# but they're considered undocumented, so don't complain if their 547# behavior changes. 548.PHONY: prebuilt 549prebuilt: $(ALL_PREBUILT) 550 551# An internal target that depends on all copied headers 552# (see copy_headers.make). Other targets that need the 553# headers to be copied first can depend on this target. 554.PHONY: all_copied_headers 555all_copied_headers: ; 556 557$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 558 559# All the droid stuff, in directories 560.PHONY: files 561files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 562 563# ------------------------------------------------------------------- 564 565.PHONY: ramdisk 566ramdisk: $(INSTALLED_RAMDISK_TARGET) 567 568.PHONY: systemtarball 569systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 570 571.PHONY: userdataimage 572userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 573 574.PHONY: userdatatarball 575userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 576 577.PHONY: bootimage 578bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 579 580ifeq ($(BUILD_TINY_ANDROID), true) 581INSTALLED_RECOVERYIMAGE_TARGET := 582endif 583 584# Build files and then package it into the rom formats 585.PHONY: droidcore 586droidcore: files \ 587 systemimage \ 588 $(INSTALLED_BOOTIMAGE_TARGET) \ 589 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 590 $(INSTALLED_USERDATAIMAGE_TARGET) \ 591 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 592 $(INSTALLED_FILES_FILE) 593 594# The actual files built by the droidcore target changes depending 595# on the build variant. 596.PHONY: droid tests 597droid tests: droidcore 598 599$(call dist-for-goals, droid, \ 600 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 601 $(INTERNAL_OTA_PACKAGE_TARGET) \ 602 $(SYMBOLS_ZIP) \ 603 $(APPS_ZIP) \ 604 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 605 $(PACKAGE_STATS_FILE) \ 606 $(INSTALLED_FILES_FILE) \ 607 $(INSTALLED_BUILD_PROP_TARGET) \ 608 $(BUILT_TARGET_FILES_PACKAGE) \ 609 ) 610 611# Tests are installed in userdata.img. If we're building the tests 612# variant, copy it for "make tests dist". Also copy a zip of the 613# contents of userdata.img, so that people can easily extract a 614# single .apk. 615ifeq ($(TARGET_BUILD_VARIANT),tests) 616$(call dist-for-goals, droid, \ 617 $(INSTALLED_USERDATAIMAGE_TARGET) \ 618 $(BUILT_TESTS_ZIP_PACKAGE) \ 619 ) 620endif 621 622.PHONY: docs 623docs: $(ALL_DOCS) 624 625.PHONY: sdk 626ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 627sdk: $(ALL_SDK_TARGETS) 628$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 629 630.PHONY: findbugs 631findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 632 633.PHONY: clean 634dirs_to_clean := \ 635 $(PRODUCT_OUT) \ 636 $(TARGET_COMMON_OUT_ROOT) \ 637 $(HOST_OUT) \ 638 $(HOST_COMMON_OUT_ROOT) 639clean: 640 @for dir in $(dirs_to_clean) ; do \ 641 echo "Cleaning $$dir..."; \ 642 rm -rf $$dir; \ 643 done 644 @echo "Clean."; \ 645 646.PHONY: clobber 647clobber: 648 @rm -rf $(OUT_DIR) 649 @echo "Entire build directory removed." 650 651# The rules for dataclean and installclean are defined in cleanbuild.mk. 652 653#xxx scrape this from ALL_MODULE_NAME_TAGS 654.PHONY: modules 655modules: 656 @echo "Available sub-modules:" 657 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 658 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 659 660.PHONY: showcommands 661showcommands: 662 @echo >/dev/null 663 664