main.mk revision 64b00e3f98a15db0ef6dfe83e3c2141b9b483631
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57VERSION_CHECK_SEQUENCE_NUMBER := 1 58-include $(OUT_DIR)/versions_checked.mk 59ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) 60 61$(info Checking build tools versions...) 62 63ifneq ($(HOST_OS),windows) 64ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 65# check for a case sensitive file system 66ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 67 echo a > $(OUT_DIR)/casecheck.txt; \ 68 echo B > $(OUT_DIR)/CaseCheck.txt; \ 69 cat $(OUT_DIR)/casecheck.txt)) 70$(warning ************************************************************) 71$(warning You are building on a case-insensitive filesystem.) 72$(warning Please move your source tree to a case-sensitive filesystem.) 73$(warning ************************************************************) 74$(error Case-insensitive filesystems not supported) 75endif 76endif 77endif 78 79# Make sure that there are no spaces in the absolute path; the 80# build system can't deal with them. 81ifneq ($(words $(shell pwd)),1) 82$(warning ************************************************************) 83$(warning You are building in a directory whose absolute path contains) 84$(warning a space character:) 85$(warning $(space)) 86$(warning "$(shell pwd)") 87$(warning $(space)) 88$(warning Please move your source tree to a path that does not contain) 89$(warning any spaces.) 90$(warning ************************************************************) 91$(error Directory names containing spaces not supported) 92endif 93 94 95# The windows build server currently uses 1.6. This will be fixed. 96ifneq ($(HOST_OS),windows) 97 98# Check for the correct version of java 99java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 100ifeq ($(strip $(java_version)),) 101$(info ************************************************************) 102$(info You are attempting to build with the incorrect version) 103$(info of java.) 104$(info $(space)) 105$(info Your version is: $(shell java -version 2>&1 | head -n 1).) 106$(info The correct version is: 1.5.) 107$(info $(space)) 108$(info Please follow the machine setup instructions at) 109$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 110$(info ************************************************************) 111$(error stop) 112endif 113 114# Check for the correct version of javac 115javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 116ifeq ($(strip $(javac_version)),) 117$(info ************************************************************) 118$(info You are attempting to build with the incorrect version) 119$(info of javac.) 120$(info $(space)) 121$(info Your version is: $(shell javac -version 2>&1 | head -n 1).) 122$(info The correct version is: 1.5.) 123$(info $(space)) 124$(info Please follow the machine setup instructions at) 125$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 126$(info ************************************************************) 127$(error stop) 128endif 129 130endif # windows 131 132$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ 133 > $(OUT_DIR)/versions_checked.mk) 134endif 135 136# These are the modifier targets that don't do anything themselves, but 137# change the behavior of the build. 138# (must be defined before including definitions.make) 139INTERNAL_MODIFIER_TARGETS := showcommands checkbuild 140 141# Bring in standard build system definitions. 142include $(BUILD_SYSTEM)/definitions.mk 143 144ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 145$(info ***************************************************************) 146$(info ***************************************************************) 147$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 148 the make command line.) 149# XXX The single quote on this line fixes gvim's syntax highlighting. 150# Without which, the rest of this file is impossible to read. 151$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 152$(info choosecombo.) 153$(info ***************************************************************) 154$(info ***************************************************************) 155$(error stopping) 156endif 157 158ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 159$(info ***************************************************************) 160$(info ***************************************************************) 161$(info Invalid variant: $(TARGET_BUILD_VARIANT) 162$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 163$(info ***************************************************************) 164$(info ***************************************************************) 165$(error stopping) 166endif 167 168### 169### In this section we set up the things that are different 170### between the build variants 171### 172 173is_sdk_build := 174ifneq ($(filter sdk,$(MAKECMDGOALS)),) 175is_sdk_build := true 176endif 177ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 178is_sdk_build := true 179endif 180 181 182## user/userdebug ## 183 184user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 185enable_target_debugging := true 186ifneq (,$(user_variant)) 187 # Target is secure in user builds. 188 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 189 190 tags_to_install := user 191 ifeq ($(user_variant),userdebug) 192 # Pick up some extra useful tools 193 tags_to_install += debug 194 else 195 # Disable debugging in plain user builds. 196 enable_target_debugging := 197 endif 198 199 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 200 # Also, remove the corresponding block in config/product_config.make. 201 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 202 WITH_DEXPREOPT := true 203 endif 204 205 # Disallow mock locations by default for user builds 206 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 207 208else # !user_variant 209 # Turn on checkjni for non-user builds. 210 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 211 # Set device insecure for non-user builds. 212 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 213 # Allow mock locations by default for non user builds 214 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 215endif # !user_variant 216 217ifeq (true,$(strip $(enable_target_debugging))) 218 # Target is more debuggable and adbd is on by default 219 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 220 # Include the debugging/testing OTA keys in this build. 221 INCLUDE_TEST_OTA_KEYS := true 222else # !enable_target_debugging 223 # Target is less debuggable and adbd is off by default 224 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 225endif # !enable_target_debugging 226 227## eng ## 228 229ifeq ($(TARGET_BUILD_VARIANT),eng) 230tags_to_install := user debug eng 231 # Don't require the setup wizard on eng builds 232 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 233 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ 234 ro.setupwizard.mode=OPTIONAL 235endif 236 237## tests ## 238 239ifeq ($(TARGET_BUILD_VARIANT),tests) 240tags_to_install := user debug eng tests 241endif 242 243## sdk ## 244 245ifdef is_sdk_build 246ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 247$(error The 'sdk' target may not be specified with any other targets) 248endif 249# TODO: this should be eng I think. Since the sdk is built from the eng 250# variant. 251tags_to_install := user debug eng 252ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 253ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 254else # !sdk 255endif 256 257# build the full stagefright library 258ifneq ($(strip BUILD_WITH_FULL_STAGEFRIGHT),) 259BUILD_WITH_FULL_STAGEFRIGHT := true 260endif 261 262## precise GC ## 263 264ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 265 # Enabling type-precise GC results in larger optimized DEX files. The 266 # additional storage requirements for ".odex" files can cause /system 267 # to overflow on some devices, so this is configured separately for 268 # each product. 269 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 270endif 271 272# Install an apns-conf.xml file if one's not already being installed. 273ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 274 PRODUCT_COPY_FILES += \ 275 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 276 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 277 $(warning implicitly installing apns-conf_sdk.xml) 278 endif 279endif 280# If we're on an eng or tests build, but not on the sdk, and we have 281# a better one, use that instead. 282ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 283 ifndef is_sdk_build 284 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 285 ifneq ($(strip $(apns_to_use)),) 286 PRODUCT_COPY_FILES := \ 287 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 288 $(strip $(apns_to_use)):system/etc/apns-conf.xml 289 endif 290 endif 291endif 292 293ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 294ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 295 296# enable vm tracing in files for now to help track 297# the cause of ANRs in the content process 298ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 299 300# ------------------------------------------------------------ 301# Define a function that, given a list of module tags, returns 302# non-empty if that module should be installed in /system. 303 304# For most goals, anything not tagged with the "tests" tag should 305# be installed in /system. 306define should-install-to-system 307$(if $(filter tests,$(1)),,true) 308endef 309 310ifdef is_sdk_build 311# For the sdk goal, anything with the "samples" tag should be 312# installed in /data even if that module also has "eng"/"debug"/"user". 313define should-install-to-system 314$(if $(filter samples tests,$(1)),,true) 315endef 316endif 317 318 319# If they only used the modifier goals (showcommands, checkbuild), we'll actually 320# build the default target. 321ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) 322.PHONY: $(INTERNAL_MODIFIER_TARGETS) 323$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) 324endif 325 326# These targets are going to delete stuff, don't bother including 327# the whole directory tree if that's all we're going to do 328ifeq ($(MAKECMDGOALS),clean) 329dont_bother := true 330endif 331ifeq ($(MAKECMDGOALS),clobber) 332dont_bother := true 333endif 334ifeq ($(MAKECMDGOALS),dataclean) 335dont_bother := true 336endif 337ifeq ($(MAKECMDGOALS),installclean) 338dont_bother := true 339endif 340 341# Bring in all modules that need to be built. 342ifneq ($(dont_bother),true) 343 344ifeq ($(HOST_OS),windows) 345SDK_ONLY := true 346endif 347ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 348SDK_ONLY := true 349endif 350 351ifeq ($(SDK_ONLY),true) 352 353subdirs := \ 354 prebuilt \ 355 build/libs/host \ 356 build/tools/zipalign \ 357 dalvik/dexdump \ 358 dalvik/libdex \ 359 dalvik/tools/dmtracedump \ 360 dalvik/tools/hprof-conv \ 361 development/tools/line_endings \ 362 sdk/emulator/mksdcard \ 363 sdk/sdklauncher \ 364 development/host \ 365 external/expat \ 366 external/libpng \ 367 external/qemu \ 368 external/sqlite/dist \ 369 external/zlib \ 370 frameworks/base/libs/utils \ 371 frameworks/base/tools/aapt \ 372 frameworks/base/tools/aidl \ 373 system/core/adb \ 374 system/core/fastboot \ 375 system/core/libcutils \ 376 system/core/liblog \ 377 system/core/libzipfile 378 379# The following can only be built if "javac" is available. 380# This check is used when building parts of the SDK under Cygwin. 381ifneq (,$(shell which javac 2>/dev/null)) 382$(warning sdk-only: javac available.) 383subdirs += \ 384 build/tools/signapk \ 385 dalvik/dx \ 386 dalvik/libcore \ 387 sdk/archquery \ 388 sdk/androidprefs \ 389 sdk/apkbuilder \ 390 sdk/jarutils \ 391 sdk/layoutlib_utils \ 392 sdk/ninepatch \ 393 sdk/sdkstats \ 394 sdk/sdkmanager \ 395 sdk/layoutopt \ 396 development/apps \ 397 development/tools/mkstubs \ 398 frameworks/base/tools/layoutlib \ 399 packages 400else 401$(warning sdk-only: javac not available.) 402endif 403 404# Exclude tools/acp when cross-compiling windows under linux 405ifeq ($(findstring Linux,$(UNAME)),) 406subdirs += build/tools/acp 407endif 408 409else # !SDK_ONLY 410ifeq ($(BUILD_TINY_ANDROID), true) 411 412# TINY_ANDROID is a super-minimal build configuration, handy for board 413# bringup and very low level debugging 414 415subdirs := \ 416 bionic \ 417 system/core \ 418 build/libs \ 419 build/target \ 420 build/tools/acp \ 421 build/tools/apriori \ 422 build/tools/kcm \ 423 build/tools/soslim \ 424 external/elfcopy \ 425 external/elfutils \ 426 external/yaffs2 \ 427 external/zlib 428else # !BUILD_TINY_ANDROID 429 430# 431# Typical build; include any Android.mk files we can find. 432# 433subdirs := $(TOP) 434 435FULL_BUILD := true 436 437endif # !BUILD_TINY_ANDROID 438 439endif # !SDK_ONLY 440 441ifneq ($(ONE_SHOT_MAKEFILE),) 442# We've probably been invoked by the "mm" shell function 443# with a subdirectory's makefile. 444include $(ONE_SHOT_MAKEFILE) 445# Change CUSTOM_MODULES to include only modules that were 446# defined by this makefile; this will install all of those 447# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 448# so that the modules will be installed in the same place they 449# would have been with a normal make. 450CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 451FULL_BUILD := 452# Stub out the notice targets, which probably aren't defined 453# when using ONE_SHOT_MAKEFILE. 454NOTICE-HOST-%: ; 455NOTICE-TARGET-%: ; 456 457else # ONE_SHOT_MAKEFILE 458 459# 460# Include all of the makefiles in the system 461# 462 463# Can't use first-makefiles-under here because 464# --mindepth=2 makes the prunes not work. 465subdir_makefiles := \ 466 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk) 467 468include $(subdir_makefiles) 469endif # ONE_SHOT_MAKEFILE 470 471# ------------------------------------------------------------------- 472# All module makefiles have been included at this point. 473# ------------------------------------------------------------------- 474 475# ------------------------------------------------------------------- 476# Include any makefiles that must happen after the module makefiles 477# have been included. 478# TODO: have these files register themselves via a global var rather 479# than hard-coding the list here. 480ifdef FULL_BUILD 481 # Only include this during a full build, otherwise we can't be 482 # guaranteed that any policies were included. 483 -include frameworks/policies/base/PolicyConfig.mk 484endif 485 486# ------------------------------------------------------------------- 487# Fix up CUSTOM_MODULES to refer to installed files rather than 488# just bare module names. Leave unknown modules alone in case 489# they're actually full paths to a particular file. 490known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 491unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 492CUSTOM_MODULES := \ 493 $(call module-installed-files,$(known_custom_modules)) \ 494 $(unknown_custom_modules) 495 496# ------------------------------------------------------------------- 497# Define dependencies for modules that require other modules. 498# This can only happen now, after we've read in all module makefiles. 499# 500# TODO: deal with the fact that a bare module name isn't 501# unambiguous enough. Maybe declare short targets like 502# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 503# BUG: the system image won't know to depend on modules that are 504# brought in as requirements of other modules. 505define add-required-deps 506$(1): $(2) 507endef 508$(foreach m,$(ALL_MODULES), \ 509 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 510 $(if $(r), \ 511 $(eval r := $(call module-installed-files,$(r))) \ 512 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 513 ) \ 514 ) 515m := 516r := 517add-required-deps := 518 519# ------------------------------------------------------------------- 520# Figure out our module sets. 521 522# Of the modules defined by the component makefiles, 523# determine what we actually want to build. 524# If a module has the "restricted" tag on it, it 525# poisons the rest of the tags and shouldn't appear 526# on any list. 527Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 528 $(CUSTOM_MODULES)) 529# TODO: Remove the 3 places in the tree that use 530# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 531 532ifdef FULL_BUILD 533 # The base list of modules to build for this product is specified 534 # by the appropriate product definition file, which was included 535 # by product_config.make. 536 user_PACKAGES := $(call module-installed-files, \ 537 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 538 ifeq (0,1) 539 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 540 $(foreach p,$(user_PACKAGES),$(info : $(p))) 541 $(error done) 542 endif 543else 544 # We're not doing a full build, and are probably only including 545 # a subset of the module makefiles. Don't try to build any modules 546 # requested by the product, because we probably won't have rules 547 # to build them. 548 user_PACKAGES := 549endif 550# Use tags to get the non-APPS user modules. Use the product 551# definition files to get the APPS user modules. 552user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 553user_MODULES := $(user_MODULES) $(user_PACKAGES) 554 555eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 556debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 557tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 558 559ifeq ($(strip $(tags_to_install)),) 560$(error ASSERTION FAILED: tags_to_install should not be empty) 561endif 562modules_to_install := $(sort $(Default_MODULES) \ 563 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 564 565# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 566# Filter out (do not install) any overridden packages. 567overridden_packages := $(call get-package-overrides,$(modules_to_install)) 568ifdef overridden_packages 569# old_modules_to_install := $(modules_to_install) 570 modules_to_install := \ 571 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 572 $(modules_to_install)) 573endif 574#$(error filtered out 575# $(filter-out $(modules_to_install),$(old_modules_to_install))) 576 577# Don't include any GNU targets in the SDK. It's ok (and necessary) 578# to build the host tools, but nothing that's going to be installed 579# on the target (including static libraries). 580ifdef is_sdk_build 581 target_gnu_MODULES := \ 582 $(filter \ 583 $(TARGET_OUT_INTERMEDIATES)/% \ 584 $(TARGET_OUT)/% \ 585 $(TARGET_OUT_DATA)/%, \ 586 $(sort $(call get-tagged-modules,gnu))) 587 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 588 modules_to_install := \ 589 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 590endif 591 592 593# build/core/Makefile contains extra stuff that we don't want to pollute this 594# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 595# contains everything that's built during the current make, but it also further 596# extends ALL_DEFAULT_INSTALLED_MODULES. 597ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 598include $(BUILD_SYSTEM)/Makefile 599modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 600ALL_DEFAULT_INSTALLED_MODULES := 601 602endif # dont_bother 603 604# These are additional goals that we build, in order to make sure that there 605# is as little code as possible in the tree that doesn't build. 606modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) 607 608# If you would like to build all goals, and not skip any intermediate 609# steps, you can pass the "all" modifier goal on the commandline. 610ifneq ($(filter all,$(MAKECMDGOALS)),) 611modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) 612endif 613 614# for easier debugging 615modules_to_check := $(sort $(modules_to_check)) 616#$(error modules_to_check $(modules_to_check)) 617 618# ------------------------------------------------------------------- 619# This is used to to get the ordering right, you can also use these, 620# but they're considered undocumented, so don't complain if their 621# behavior changes. 622.PHONY: prebuilt 623prebuilt: $(ALL_PREBUILT) 624 625# An internal target that depends on all copied headers 626# (see copy_headers.make). Other targets that need the 627# headers to be copied first can depend on this target. 628.PHONY: all_copied_headers 629all_copied_headers: ; 630 631$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 632 633# All the droid stuff, in directories 634.PHONY: files 635files: prebuilt \ 636 $(modules_to_install) \ 637 $(modules_to_check) \ 638 $(INSTALLED_ANDROID_INFO_TXT_TARGET) 639 640# ------------------------------------------------------------------- 641 642.PHONY: checkbuild 643checkbuild: $(modules_to_check) 644 645.PHONY: ramdisk 646ramdisk: $(INSTALLED_RAMDISK_TARGET) 647 648.PHONY: systemtarball 649systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 650 651.PHONY: userdataimage 652userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 653 654.PHONY: userdatatarball 655userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 656 657.PHONY: bootimage 658bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 659 660ifeq ($(BUILD_TINY_ANDROID), true) 661INSTALLED_RECOVERYIMAGE_TARGET := 662endif 663 664# Build files and then package it into the rom formats 665.PHONY: droidcore 666droidcore: files \ 667 systemimage \ 668 $(INSTALLED_BOOTIMAGE_TARGET) \ 669 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 670 $(INSTALLED_USERDATAIMAGE_TARGET) \ 671 $(INSTALLED_FILES_FILE) 672 673# The actual files built by the droidcore target changes depending 674# on the build variant. 675.PHONY: droid tests 676droid tests: droidcore 677 678$(call dist-for-goals, droid, \ 679 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 680 $(INTERNAL_OTA_PACKAGE_TARGET) \ 681 $(SYMBOLS_ZIP) \ 682 $(APPS_ZIP) \ 683 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 684 $(PACKAGE_STATS_FILE) \ 685 $(INSTALLED_FILES_FILE) \ 686 $(INSTALLED_BUILD_PROP_TARGET) \ 687 $(BUILT_TARGET_FILES_PACKAGE) \ 688 ) 689 690# Tests are installed in userdata.img. If we're building the tests 691# variant, copy it for "make tests dist". Also copy a zip of the 692# contents of userdata.img, so that people can easily extract a 693# single .apk. 694ifeq ($(TARGET_BUILD_VARIANT),tests) 695$(call dist-for-goals, droid, \ 696 $(INSTALLED_USERDATAIMAGE_TARGET) \ 697 $(BUILT_TESTS_ZIP_PACKAGE) \ 698 ) 699endif 700 701.PHONY: docs 702docs: $(ALL_DOCS) 703 704.PHONY: sdk 705ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 706sdk: $(ALL_SDK_TARGETS) 707$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 708 709.PHONY: findbugs 710findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 711 712.PHONY: clean 713dirs_to_clean := \ 714 $(PRODUCT_OUT) \ 715 $(TARGET_COMMON_OUT_ROOT) \ 716 $(HOST_OUT) \ 717 $(HOST_COMMON_OUT_ROOT) 718clean: 719 @for dir in $(dirs_to_clean) ; do \ 720 echo "Cleaning $$dir..."; \ 721 rm -rf $$dir; \ 722 done 723 @echo "Clean."; \ 724 725.PHONY: clobber 726clobber: 727 @rm -rf $(OUT_DIR) 728 @echo "Entire build directory removed." 729 730# The rules for dataclean and installclean are defined in cleanbuild.mk. 731 732#xxx scrape this from ALL_MODULE_NAME_TAGS 733.PHONY: modules 734modules: 735 @echo "Available sub-modules:" 736 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 737 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 738 739.PHONY: showcommands 740showcommands: 741 @echo >/dev/null 742