main.mk revision 87c86573e051602ddc2759857c961fe5124bc22a
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88 89# The windows build server currently uses 1.6. This will be fixed. 90ifneq ($(HOST_OS),windows) 91 92# Check for the correct version of java 93java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 94ifeq ($(strip $(java_version)),) 95$(info ************************************************************) 96$(info You are attempting to build with the incorrect version) 97$(info of java.) 98$(info $(space)) 99$(info Your version is: $(shell java -version 2>&1 | head -n 1).) 100$(info The correct version is: 1.5.) 101$(info $(space)) 102$(info Please follow the machine setup instructions at) 103$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 104$(info ************************************************************) 105$(error stop) 106endif 107 108# Check for the correct version of javac 109javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 110ifeq ($(strip $(javac_version)),) 111$(info ************************************************************) 112$(info You are attempting to build with the incorrect version) 113$(info of javac.) 114$(info $(space)) 115$(info Your version is: $(shell javac -version 2>&1 | head -n 1).) 116$(info The correct version is: 1.5.) 117$(info $(space)) 118$(info Please follow the machine setup instructions at) 119$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 120$(info ************************************************************) 121$(error stop) 122endif 123 124endif # windows 125 126# These are the modifier targets that don't do anything themselves, but 127# change the behavior of the build. 128# (must be defined before including definitions.make) 129INTERNAL_MODIFIER_TARGETS := showcommands 130 131# Bring in standard build system definitions. 132include $(BUILD_SYSTEM)/definitions.mk 133 134ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 135$(info ***************************************************************) 136$(info ***************************************************************) 137$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 138 the make command line.) 139# XXX The single quote on this line fixes gvim's syntax highlighting. 140# Without which, the rest of this file is impossible to read. 141$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 142$(info choosecombo.) 143$(info ***************************************************************) 144$(info ***************************************************************) 145$(error stopping) 146endif 147 148ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 149$(info ***************************************************************) 150$(info ***************************************************************) 151$(info Invalid variant: $(TARGET_BUILD_VARIANT) 152$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 153$(info ***************************************************************) 154$(info ***************************************************************) 155$(error stopping) 156endif 157 158### 159### In this section we set up the things that are different 160### between the build variants 161### 162 163is_sdk_build := 164ifneq ($(filter sdk,$(MAKECMDGOALS)),) 165is_sdk_build := true 166endif 167ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 168is_sdk_build := true 169endif 170 171 172## user/userdebug ## 173 174user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 175enable_target_debugging := true 176ifneq (,$(user_variant)) 177 # Target is secure in user builds. 178 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 179 180 tags_to_install := user 181 ifeq ($(user_variant),userdebug) 182 # Pick up some extra useful tools 183 tags_to_install += debug 184 else 185 # Disable debugging in plain user builds. 186 enable_target_debugging := 187 endif 188 189 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 190 # Also, remove the corresponding block in config/product_config.make. 191 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 192 WITH_DEXPREOPT := true 193 endif 194 195 # Disallow mock locations by default for user builds 196 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 197 198else # !user_variant 199 # Turn on checkjni for non-user builds. 200 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 201 # Set device insecure for non-user builds. 202 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 203 # Allow mock locations by default for non user builds 204 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 205endif # !user_variant 206 207ifeq (true,$(strip $(enable_target_debugging))) 208 # Target is more debuggable and adbd is on by default 209 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 210 # Include the debugging/testing OTA keys in this build. 211 INCLUDE_TEST_OTA_KEYS := true 212else # !enable_target_debugging 213 # Target is less debuggable and adbd is off by default 214 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 215endif # !enable_target_debugging 216 217## eng ## 218 219ifeq ($(TARGET_BUILD_VARIANT),eng) 220tags_to_install := user debug eng 221 # Don't require the setup wizard on eng builds 222 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 223 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 224endif 225 226## tests ## 227 228ifeq ($(TARGET_BUILD_VARIANT),tests) 229tags_to_install := user debug eng tests 230endif 231 232## sdk ## 233 234ifdef is_sdk_build 235ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 236$(error The 'sdk' target may not be specified with any other targets) 237endif 238# TODO: this should be eng I think. Since the sdk is built from the eng 239# variant. 240tags_to_install := user debug eng 241ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 242ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 243else # !sdk 244# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 245ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 246endif 247 248## precise GC ## 249 250ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 251 # Enabling type-precise GC results in larger optimized DEX files. The 252 # additional storage requirements for ".odex" files can cause /system 253 # to overflow on some devices, so this is configured separately for 254 # each product. 255 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 256endif 257 258# Install an apns-conf.xml file if one's not already being installed. 259ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 260 PRODUCT_COPY_FILES += \ 261 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 262 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 263 $(warning implicitly installing apns-conf_sdk.xml) 264 endif 265endif 266# If we're on an eng or tests build, but not on the sdk, and we have 267# a better one, use that instead. 268ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 269 ifndef is_sdk_build 270 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 271 ifneq ($(strip $(apns_to_use)),) 272 PRODUCT_COPY_FILES := \ 273 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 274 $(strip $(apns_to_use)):system/etc/apns-conf.xml 275 endif 276 endif 277endif 278 279ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 280 281# enable vm tracing in files for now to help track 282# the cause of ANRs in the content process 283ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 284 285 286# ------------------------------------------------------------ 287# Define a function that, given a list of module tags, returns 288# non-empty if that module should be installed in /system. 289 290# For most goals, anything not tagged with the "tests" tag should 291# be installed in /system. 292define should-install-to-system 293$(if $(filter tests,$(1)),,true) 294endef 295 296ifdef is_sdk_build 297# For the sdk goal, anything with the "samples" tag should be 298# installed in /data even if that module also has "eng"/"debug"/"user". 299define should-install-to-system 300$(if $(filter samples tests,$(1)),,true) 301endef 302endif 303 304 305# If all they typed was make showcommands, we'll actually build 306# the default target. 307ifeq ($(MAKECMDGOALS),showcommands) 308.PHONY: showcommands 309showcommands: $(DEFAULT_GOAL) 310endif 311 312# These targets are going to delete stuff, don't bother including 313# the whole directory tree if that's all we're going to do 314ifeq ($(MAKECMDGOALS),clean) 315dont_bother := true 316endif 317ifeq ($(MAKECMDGOALS),clobber) 318dont_bother := true 319endif 320ifeq ($(MAKECMDGOALS),dataclean) 321dont_bother := true 322endif 323ifeq ($(MAKECMDGOALS),installclean) 324dont_bother := true 325endif 326 327# Bring in all modules that need to be built. 328ifneq ($(dont_bother),true) 329 330subdir_makefiles := 331 332ifeq ($(HOST_OS),windows) 333SDK_ONLY := true 334endif 335ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 336SDK_ONLY := true 337endif 338 339ifeq ($(SDK_ONLY),true) 340 341subdirs := \ 342 prebuilt \ 343 build/libs/host \ 344 dalvik/dexdump \ 345 dalvik/libdex \ 346 dalvik/tools/dmtracedump \ 347 dalvik/tools/hprof-conv \ 348 development/emulator/mksdcard \ 349 development/tools/line_endings \ 350 development/host \ 351 external/expat \ 352 external/libpng \ 353 external/qemu \ 354 external/sqlite/dist \ 355 external/zlib \ 356 frameworks/base/libs/utils \ 357 frameworks/base/tools/aapt \ 358 frameworks/base/tools/aidl \ 359 system/core/adb \ 360 system/core/fastboot \ 361 system/core/libcutils \ 362 system/core/liblog \ 363 system/core/libzipfile 364 365# The following can only be built if "javac" is available. 366# This check is used when building parts of the SDK under Cygwin. 367ifneq (,$(shell which javac 2>/dev/null)) 368$(warning sdk-only: javac available.) 369subdirs += \ 370 build/tools/signapk \ 371 build/tools/zipalign \ 372 dalvik/dx \ 373 dalvik/libcore \ 374 development/apps \ 375 development/tools/archquery \ 376 development/tools/androidprefs \ 377 development/tools/apkbuilder \ 378 development/tools/jarutils \ 379 development/tools/layoutlib_utils \ 380 development/tools/ninepatch \ 381 development/tools/sdkstats \ 382 development/tools/sdkmanager \ 383 development/tools/mkstubs \ 384 frameworks/base \ 385 frameworks/base/tools/layoutlib \ 386 external/googleclient \ 387 packages 388else 389$(warning sdk-only: javac not available.) 390endif 391 392# Exclude tools/acp when cross-compiling windows under linux 393ifeq ($(findstring Linux,$(UNAME)),) 394subdirs += build/tools/acp 395endif 396 397else # !SDK_ONLY 398ifeq ($(BUILD_TINY_ANDROID), true) 399 400# TINY_ANDROID is a super-minimal build configuration, handy for board 401# bringup and very low level debugging 402 403INTERNAL_DEFAULT_DOCS_TARGETS := 404 405subdirs := \ 406 bionic \ 407 system/core \ 408 build/libs \ 409 build/target \ 410 build/tools/acp \ 411 build/tools/apriori \ 412 build/tools/kcm \ 413 build/tools/soslim \ 414 external/elfcopy \ 415 external/elfutils \ 416 external/yaffs2 \ 417 external/zlib 418else # !BUILD_TINY_ANDROID 419 420# 421# Typical build; include any Android.mk files we can find. 422# 423INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 424subdirs := $(TOP) 425 426FULL_BUILD := true 427 428endif # !BUILD_TINY_ANDROID 429 430endif # !SDK_ONLY 431 432# Can't use first-makefiles-under here because 433# --mindepth=2 makes the prunes not work. 434subdir_makefiles += \ 435 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 436 437# 438# Include all of the makefiles in the system 439# 440 441ifneq ($(ONE_SHOT_MAKEFILE),) 442# We've probably been invoked by the "mm" shell function 443# with a subdirectory's makefile. 444include $(ONE_SHOT_MAKEFILE) 445# Change CUSTOM_MODULES to include only modules that were 446# defined by this makefile; this will install all of those 447# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 448# so that the modules will be installed in the same place they 449# would have been with a normal make. 450CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 451FULL_BUILD := 452INTERNAL_DEFAULT_DOCS_TARGETS := 453# Stub out the notice targets, which probably aren't defined 454# when using ONE_SHOT_MAKEFILE. 455NOTICE-HOST-%: ; 456NOTICE-TARGET-%: ; 457else 458include $(subdir_makefiles) 459endif 460# ------------------------------------------------------------------- 461# All module makefiles have been included at this point. 462# ------------------------------------------------------------------- 463 464# ------------------------------------------------------------------- 465# Include any makefiles that must happen after the module makefiles 466# have been included. 467# TODO: have these files register themselves via a global var rather 468# than hard-coding the list here. 469ifdef FULL_BUILD 470 # Only include this during a full build, otherwise we can't be 471 # guaranteed that any policies were included. 472 -include frameworks/policies/base/PolicyConfig.mk 473endif 474 475# ------------------------------------------------------------------- 476# Fix up CUSTOM_MODULES to refer to installed files rather than 477# just bare module names. Leave unknown modules alone in case 478# they're actually full paths to a particular file. 479known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 480unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 481CUSTOM_MODULES := \ 482 $(call module-installed-files,$(known_custom_modules)) \ 483 $(unknown_custom_modules) 484 485# ------------------------------------------------------------------- 486# Define dependencies for modules that require other modules. 487# This can only happen now, after we've read in all module makefiles. 488# 489# TODO: deal with the fact that a bare module name isn't 490# unambiguous enough. Maybe declare short targets like 491# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 492# BUG: the system image won't know to depend on modules that are 493# brought in as requirements of other modules. 494define add-required-deps 495$(1): $(2) 496endef 497$(foreach m,$(ALL_MODULES), \ 498 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 499 $(if $(r), \ 500 $(eval r := $(call module-installed-files,$(r))) \ 501 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 502 ) \ 503 ) 504m := 505r := 506add-required-deps := 507 508# ------------------------------------------------------------------- 509# Figure out our module sets. 510 511# Of the modules defined by the component makefiles, 512# determine what we actually want to build. 513# If a module has the "restricted" tag on it, it 514# poisons the rest of the tags and shouldn't appear 515# on any list. 516Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 517 $(ALL_BUILT_MODULES) \ 518 $(CUSTOM_MODULES)) 519# TODO: Remove the 3 places in the tree that use 520# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 521 522ifdef FULL_BUILD 523 # The base list of modules to build for this product is specified 524 # by the appropriate product definition file, which was included 525 # by product_config.make. 526 user_PACKAGES := $(call module-installed-files, \ 527 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 528 ifeq (0,1) 529 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 530 $(foreach p,$(user_PACKAGES),$(info : $(p))) 531 $(error done) 532 endif 533else 534 # We're not doing a full build, and are probably only including 535 # a subset of the module makefiles. Don't try to build any modules 536 # requested by the product, because we probably won't have rules 537 # to build them. 538 user_PACKAGES := 539endif 540# Use tags to get the non-APPS user modules. Use the product 541# definition files to get the APPS user modules. 542user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 543user_MODULES := $(user_MODULES) $(user_PACKAGES) 544 545eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 546debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 547tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 548 549ifeq ($(strip $(tags_to_install)),) 550$(error ASSERTION FAILED: tags_to_install should not be empty) 551endif 552modules_to_install := $(sort $(Default_MODULES) \ 553 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 554 555# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 556# Filter out (do not install) any overridden packages. 557overridden_packages := $(call get-package-overrides,$(modules_to_install)) 558ifdef overridden_packages 559# old_modules_to_install := $(modules_to_install) 560 modules_to_install := \ 561 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 562 $(modules_to_install)) 563endif 564#$(error filtered out 565# $(filter-out $(modules_to_install),$(old_modules_to_install))) 566 567# Don't include any GNU targets in the SDK. It's ok (and necessary) 568# to build the host tools, but nothing that's going to be installed 569# on the target (including static libraries). 570ifdef is_sdk_build 571 target_gnu_MODULES := \ 572 $(filter \ 573 $(TARGET_OUT_INTERMEDIATES)/% \ 574 $(TARGET_OUT)/% \ 575 $(TARGET_OUT_DATA)/%, \ 576 $(sort $(call get-tagged-modules,gnu))) 577 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 578 modules_to_install := \ 579 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 580endif 581 582 583# config/Makefile contains extra stuff that we don't want to pollute this 584# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 585# contains everything that's built during the current make, but it also further 586# extends ALL_DEFAULT_INSTALLED_MODULES. 587ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 588include $(BUILD_SYSTEM)/Makefile 589modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 590ALL_DEFAULT_INSTALLED_MODULES := 591 592endif # dont_bother 593 594# ------------------------------------------------------------------- 595# This is used to to get the ordering right, you can also use these, 596# but they're considered undocumented, so don't complain if their 597# behavior changes. 598.PHONY: prebuilt 599prebuilt: $(ALL_PREBUILT) 600 601# An internal target that depends on all copied headers 602# (see copy_headers.make). Other targets that need the 603# headers to be copied first can depend on this target. 604.PHONY: all_copied_headers 605all_copied_headers: ; 606 607$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 608 609# All the droid stuff, in directories 610.PHONY: files 611files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 612 613# ------------------------------------------------------------------- 614 615.PHONY: ramdisk 616ramdisk: $(INSTALLED_RAMDISK_TARGET) 617 618.PHONY: systemtarball 619systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 620 621.PHONY: userdataimage 622userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 623 624.PHONY: userdatatarball 625userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 626 627.PHONY: bootimage 628bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 629 630ifeq ($(BUILD_TINY_ANDROID), true) 631INSTALLED_RECOVERYIMAGE_TARGET := 632endif 633 634# Build files and then package it into the rom formats 635.PHONY: droidcore 636droidcore: files \ 637 systemimage \ 638 $(INSTALLED_BOOTIMAGE_TARGET) \ 639 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 640 $(INSTALLED_USERDATAIMAGE_TARGET) \ 641 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 642 $(INSTALLED_FILES_FILE) 643 644# The actual files built by the droidcore target changes depending 645# on the build variant. 646.PHONY: droid tests 647droid tests: droidcore 648 649$(call dist-for-goals, droid, \ 650 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 651 $(INTERNAL_OTA_PACKAGE_TARGET) \ 652 $(SYMBOLS_ZIP) \ 653 $(APPS_ZIP) \ 654 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 655 $(PACKAGE_STATS_FILE) \ 656 $(INSTALLED_FILES_FILE) \ 657 $(INSTALLED_BUILD_PROP_TARGET) \ 658 $(BUILT_TARGET_FILES_PACKAGE) \ 659 ) 660 661# Tests are installed in userdata.img. If we're building the tests 662# variant, copy it for "make tests dist". Also copy a zip of the 663# contents of userdata.img, so that people can easily extract a 664# single .apk. 665ifeq ($(TARGET_BUILD_VARIANT),tests) 666$(call dist-for-goals, droid, \ 667 $(INSTALLED_USERDATAIMAGE_TARGET) \ 668 $(BUILT_TESTS_ZIP_PACKAGE) \ 669 ) 670endif 671 672.PHONY: docs 673docs: $(ALL_DOCS) 674 675.PHONY: sdk 676ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 677sdk: $(ALL_SDK_TARGETS) 678$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 679 680.PHONY: findbugs 681findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 682 683.PHONY: clean 684dirs_to_clean := \ 685 $(PRODUCT_OUT) \ 686 $(TARGET_COMMON_OUT_ROOT) \ 687 $(HOST_OUT) \ 688 $(HOST_COMMON_OUT_ROOT) 689clean: 690 @for dir in $(dirs_to_clean) ; do \ 691 echo "Cleaning $$dir..."; \ 692 rm -rf $$dir; \ 693 done 694 @echo "Clean."; \ 695 696.PHONY: clobber 697clobber: 698 @rm -rf $(OUT_DIR) 699 @echo "Entire build directory removed." 700 701# The rules for dataclean and installclean are defined in cleanbuild.mk. 702 703#xxx scrape this from ALL_MODULE_NAME_TAGS 704.PHONY: modules 705modules: 706 @echo "Available sub-modules:" 707 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 708 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 709 710.PHONY: showcommands 711showcommands: 712 @echo >/dev/null 713 714