xref: /external/bison/doc/Makefile

# Makefile.in generated by automake 1.9.6 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/bison
pkglibdir = $(libdir)/bison
pkgincludedir = $(includedir)/bison
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
subdir = doc
DIST_COMMON = $(bison_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-vti \
	$(srcdir)/version.texi
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/bison-i18n.m4 \
	$(top_srcdir)/m4/c-working.m4 $(top_srcdir)/m4/cxx.m4 \
	$(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dmalloc.m4 \
	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/error.m4 \
	$(top_srcdir)/m4/exitfail.m4 $(top_srcdir)/m4/extensions.m4 \
	$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/gettext_gl.m4 \
	$(top_srcdir)/m4/gnulib.m4 $(top_srcdir)/m4/hard-locale.m4 \
	$(top_srcdir)/m4/hash.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/inttypes_h_gl.m4 \
	$(top_srcdir)/m4/lib-ld_gl.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix_gl.m4 $(top_srcdir)/m4/m4.m4 \
	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
	$(top_srcdir)/m4/mbswidth.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/obstack.m4 $(top_srcdir)/m4/onceonly.m4 \
	$(top_srcdir)/m4/po_gl.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/quote.m4 $(top_srcdir)/m4/quotearg.m4 \
	$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stdint_h_gl.m4 \
	$(top_srcdir)/m4/stdio-safer.m4 $(top_srcdir)/m4/stpcpy.m4 \
	$(top_srcdir)/m4/strdup.m4 $(top_srcdir)/m4/strerror.m4 \
	$(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \
	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoul.m4 \
	$(top_srcdir)/m4/strverscmp.m4 $(top_srcdir)/m4/subpipe.m4 \
	$(top_srcdir)/m4/timevar.m4 $(top_srcdir)/m4/uintmax_t_gl.m4 \
	$(top_srcdir)/m4/ulonglong_gl.m4 \
	$(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \
	$(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/warning.m4 \
	$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/bison.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = bison.dvi
PDFS = bison.pdf
PSS = bison.ps
HTMLS = bison.html
TEXINFOS = bison.texinfo
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run tar
AUTOCONF = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run autoheader
AUTOM4TE = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run autom4te
AUTOMAKE = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run automake-1.9
AWK = gawk
BISON_CXX_WORKS = :
BISON_CXX_WORKS_FALSE = #
BISON_CXX_WORKS_TRUE = 
BISON_LOCALEDIR = /usr/share/locale
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
GCC = yes
GETOPT_H = 
GMSGFMT = /usr/bin/msgfmt
HAVE__BOOL = 1
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INTLLIBS = 
INTL_MACOSX_LIBS = 
LDFLAGS = 
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBICONV = -liconv
LIBINTL = 
LIBOBJS =  dirname$U.o exitfail$U.o hard-locale$U.o hash$U.o quote$U.o quotearg$U.o fopen-safer$U.o dup-safer$U.o fd-safer$U.o pipe-safer$U.o xmalloc$U.o
LIBS = 
LTLIBICONV = -liconv
LTLIBINTL = 
LTLIBOBJS =  dirname$U.lo exitfail$U.lo hard-locale$U.lo hash$U.lo quote$U.lo quotearg$U.lo fopen-safer$U.lo dup-safer$U.lo fd-safer$U.lo pipe-safer$U.lo xmalloc$U.lo
M4 = /usr/bin/m4
MAKEINFO = ${SHELL} /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/missing --run makeinfo
MKINSTALLDIRS = $(top_builddir)/build-aux/mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
O0CFLAGS = -g 
O0CXXFLAGS = -g 
OBJEXT = o
PACKAGE = bison
PACKAGE_BUGREPORT = bug-bison@gnu.org
PACKAGE_NAME = GNU Bison
PACKAGE_STRING = GNU Bison 2.3
PACKAGE_TARNAME = bison
PACKAGE_VERSION = 2.3
PATH_SEPARATOR = :
POSUB = po
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STDBOOL_H = 
STRIP = 
UNISTD_H = 
USE_NLS = yes
VALGRIND = 
VERSION = 2.3
WARNING_CFLAGS = 
WARNING_CXXFLAGS = 
WERROR_CFLAGS = 
XGETTEXT = /usr/bin/xgettext
YACC = bison -y
YACC_LIBRARY = liby.a
YACC_SCRIPT = yacc
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_RANLIB = ranlib
ac_ct_STRIP = 
aclocaldir = ${datadir}/aclocal
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /usr/local/google/workspace/WebKit/tools/bison-2.3/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /home/phanna/src/bison
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = 
AM_MAKEINFOFLAGS = --no-split
info_TEXINFOS = bison.texinfo
man_MANS = bison.1
bison_TEXINFOS = gpl.texi fdl.texi
EXTRA_DIST = bison.1 refcard.tex
CLEANFILES = refcard.dvi refcard.log refcard.ps bison.fns
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

.texinfo.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texinfo.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texinfo.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texinfo.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/bison.info: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
bison.dvi: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
bison.pdf: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
bison.html: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: bison.texinfo $(top_srcdir)/configure
	@(dir=.; test -f ./bison.texinfo || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/bison.texinfo`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf bison.aux bison.cp bison.cps bison.fn bison.ky bison.kys bison.log \
	  bison.pg bison.pgs bison.tmp bison.toc bison.tp bison.vr \
	  bison.dvi bison.pdf bison.ps bison.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man1

.PHONY: all all-am check check-am clean clean-generic clean-local \
	dist-info distclean distclean-generic distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-man1 install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-info-am uninstall-man \
	uninstall-man1


clean-local:
	rm -rf *.t2d

refcard.dvi: refcard.tex
	tex refcard.tex

refcard.ps: refcard.dvi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: