1/******************************************************************************
2 *
3 *  Copyright (C) 2001-2012 Broadcom Corporation
4 *
5 *  Licensed under the Apache License, Version 2.0 (the "License");
6 *  you may not use this file except in compliance with the License.
7 *  You may obtain a copy of the License at:
8 *
9 *  http://www.apache.org/licenses/LICENSE-2.0
10 *
11 *  Unless required by applicable law or agreed to in writing, software
12 *  distributed under the License is distributed on an "AS IS" BASIS,
13 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 *  See the License for the specific language governing permissions and
15 *  limitations under the License.
16 *
17 ******************************************************************************/
18
19/******************************************************************************
20 *
21 *  Definitions for UPIO driver
22 *
23 ******************************************************************************/
24#ifndef UPIO_H
25#define UPIO_H
26
27#include "bt_target.h"
28
29/* Enumeration of UPIO features                                         */
30/* Not all features enumerated here are supported by the hardware.      */
31/* Use UPIO_Feature() to determine support of a particular feature.     */
32enum
33{
34    /* LEDs */
35    UPIO_FEAT_LED1,
36    UPIO_FEAT_LED2,
37    UPIO_FEAT_LED3,
38    UPIO_FEAT_LED4,
39    UPIO_FEAT_LED5,
40    UPIO_FEAT_LED6,
41    UPIO_FEAT_LED7,
42    UPIO_FEAT_LED8,
43
44    /* Switches */
45    UPIO_FEAT_SWITCH1,
46    UPIO_FEAT_SWITCH2,
47    UPIO_FEAT_SWITCH3,
48    UPIO_FEAT_SWITCH4,
49    UPIO_FEAT_SWITCH5,
50    UPIO_FEAT_SWITCH6,
51    UPIO_FEAT_SWITCH7,
52    UPIO_FEAT_SWITCH8,
53    UPIO_FEAT_SWITCH9,
54    UPIO_FEAT_SWITCH10,
55    UPIO_FEAT_SWITCH11,
56    UPIO_FEAT_SWITCH12,
57    UPIO_FEAT_SWITCH13,
58    UPIO_FEAT_SWITCH14,
59    UPIO_FEAT_SWITCH15,
60    UPIO_FEAT_SWITCH16,
61
62    /* Jumpers */
63    UPIO_FEAT_JUMPER1,
64    UPIO_FEAT_JUMPER2,
65    UPIO_FEAT_JUMPER3,
66    UPIO_FEAT_JUMPER4,
67    UPIO_FEAT_JUMPER5,
68    UPIO_FEAT_JUMPER6,
69    UPIO_FEAT_JUMPER7,
70    UPIO_FEAT_JUMPER8,
71
72    /* Push buttons */
73    UPIO_FEAT_BUTTON1,
74    UPIO_FEAT_BUTTON2,
75    UPIO_FEAT_BUTTON3,
76    UPIO_FEAT_BUTTON4,
77    UPIO_FEAT_BUTTON5,
78    UPIO_FEAT_BUTTON6,
79    UPIO_FEAT_BUTTON7,
80    UPIO_FEAT_BUTTON8,
81
82    /* General purpose */
83    UPIO_FEAT_GENERAL1,
84    UPIO_FEAT_GENERAL2,
85    UPIO_FEAT_GENERAL3,
86    UPIO_FEAT_GENERAL4,
87    UPIO_FEAT_GENERAL5,
88    UPIO_FEAT_GENERAL6,
89    UPIO_FEAT_GENERAL7,
90    UPIO_FEAT_GENERAL8,
91    UPIO_FEAT_GENERAL9,
92    UPIO_FEAT_GENERAL10,
93    UPIO_FEAT_GENERAL11,
94    UPIO_FEAT_GENERAL12,
95    UPIO_FEAT_GENERAL13,
96    UPIO_FEAT_GENERAL14,
97    UPIO_FEAT_GENERAL15,
98    UPIO_FEAT_GENERAL16,
99    UPIO_FEAT_GENERAL17,
100    UPIO_FEAT_GENERAL18,
101    UPIO_FEAT_GENERAL19,
102    UPIO_FEAT_GENERAL20,
103    UPIO_FEAT_GENERAL21,
104    UPIO_FEAT_GENERAL22,
105    UPIO_FEAT_GENERAL23,
106    UPIO_FEAT_GENERAL24,
107    UPIO_FEAT_GENERAL25,
108    UPIO_FEAT_GENERAL26,
109    UPIO_FEAT_GENERAL27,
110    UPIO_FEAT_GENERAL28,
111    UPIO_FEAT_GENERAL29,
112    UPIO_FEAT_GENERAL30,
113    UPIO_FEAT_GENERAL31,
114    UPIO_FEAT_GENERAL32,
115
116    UPIO_FEAT_IN_HIGH,          /* Support for input with interrupt on high signal level. */
117    UPIO_FEAT_IN_LOW,           /* Support for input with interrupt on low signal level. */
118    UPIO_FEAT_IN_RISE,          /* Support for input with interrupt on rising edge. */
119    UPIO_FEAT_IN_FALL           /* Support for input with interrupt on falling. */
120
121};
122typedef UINT8 tUPIO_FEATURE;
123
124
125/* Enumeration of UPIO configurations */
126enum
127{
128    UPIO_OUT,
129    UPIO_IN,
130    UPIO_IN_EDGE,
131    UPIO_IN_LEVEL,
132    UPIO_NONE
133};
134typedef UINT8 tUPIO_CONFIG;
135
136
137/* Enumeration of UPIO types */
138enum
139{
140    UPIO_LED,                   /* LED */
141    UPIO_SWITCH,                /* Switch */
142    UPIO_JUMPER,                /* Jumper */
143    UPIO_BUTTON,                /* Push-button switch */
144    UPIO_GENERAL,               /* General purpose I/O */
145
146    UPIO_NUMBER_OF_TYPES
147};
148typedef UINT8 tUPIO_TYPE;
149
150
151/* Enumeration of UPIO states */
152enum
153{
154    UPIO_OFF,
155    UPIO_ON,
156    UPIO_TOGGLE
157};
158typedef UINT8 tUPIO_STATE;
159
160
161enum
162{
163    UPIO_SW_BANK2,
164    UPIO_SW_BANK3
165};
166typedef UINT8 tUPIO_SW_BANK;
167
168/* Jumper masks */
169#define UPIO_JUMPER1    0x00000001
170#define UPIO_JUMPER2    0x00000002
171#define UPIO_JUMPER3    0x00000004
172#define UPIO_JUMPER4    0x00000008
173#define UPIO_JUMPER5    0x00000010
174#define UPIO_JUMPER6    0x00000020
175#define UPIO_JUMPER7    0x00000040
176#define UPIO_JUMPER8    0x00000080
177
178/* General purpose i/o masks */
179#define UPIO_GENERAL1   0x00000001
180#define UPIO_GENERAL2   0x00000002
181#define UPIO_GENERAL3   0x00000004
182#define UPIO_GENERAL4   0x00000008
183#define UPIO_GENERAL5   0x00000010
184#define UPIO_GENERAL6   0x00000020
185#define UPIO_GENERAL7   0x00000040
186#define UPIO_GENERAL8   0x00000080
187#define UPIO_GENERAL9   0x00000100
188#define UPIO_GENERAL10  0x00000200
189#define UPIO_GENERAL11  0x00000400
190#define UPIO_GENERAL12  0x00000800
191#define UPIO_GENERAL13  0x00001000
192#define UPIO_GENERAL14  0x00002000
193#define UPIO_GENERAL15  0x00004000
194#define UPIO_GENERAL16  0x00008000
195#define UPIO_GENERAL17  0x00010000
196#define UPIO_GENERAL18  0x00020000
197#define UPIO_GENERAL19  0x00040000
198#define UPIO_GENERAL20  0x00080000
199#define UPIO_GENERAL21  0x00100000
200#define UPIO_GENERAL22  0x00200000
201#define UPIO_GENERAL23  0x00400000
202#define UPIO_GENERAL24  0x00800000
203#define UPIO_GENERAL25  0x01000000
204#define UPIO_GENERAL26  0x02000000
205#define UPIO_GENERAL27  0x04000000
206#define UPIO_GENERAL28  0x08000000
207#define UPIO_GENERAL29  0x10000000
208#define UPIO_GENERAL30  0x20000000
209#define UPIO_GENERAL31  0x40000000
210#define UPIO_GENERAL32  0x80000000
211
212typedef UINT32 tUPIO;
213
214/* LED masks */
215#define UPIO_LED1       0x00000001
216#define UPIO_LED2       0x00000002
217#define UPIO_LED3       0x00000004
218#define UPIO_LED4       0x00000008
219#define UPIO_LED5       0x00000010
220#define UPIO_LED6       0x00000020
221#define UPIO_LED7       0x00000040
222#define UPIO_LED8       0x00000080
223
224#define UPIO_LED_ALL    (UPIO_LED1 | UPIO_LED2 | UPIO_LED3 | UPIO_LED4 | \
225                        UPIO_LED5 | UPIO_LED6 | UPIO_LED7 | UPIO_LED8)
226
227
228/* Switch masks */
229#define UPIO_SWITCH1    0x00000001
230#define UPIO_SWITCH2    0x00000002
231#define UPIO_SWITCH3    0x00000004
232#define UPIO_SWITCH4    0x00000008
233#define UPIO_SWITCH5    0x00000010
234#define UPIO_SWITCH6    0x00000020
235#define UPIO_SWITCH7    0x00000040
236#define UPIO_SWITCH8    0x00000080
237#define UPIO_SWITCH9    0x00000100
238#define UPIO_SWITCH10   0x00000200
239#define UPIO_SWITCH11   0x00000400
240#define UPIO_SWITCH12   0x00000800
241#define UPIO_SWITCH13   0x00001000
242#define UPIO_SWITCH14   0x00002000
243#define UPIO_SWITCH15   0x00004000
244#define UPIO_SWITCH16   0x00008000
245
246/* Push button masks */
247#define UPIO_BUTTON1    0x00000001
248#define UPIO_BUTTON2    0x00000002
249#define UPIO_BUTTON3    0x00000004
250#define UPIO_BUTTON4    0x00000008
251#define UPIO_BUTTON5    0x00000010
252#define UPIO_BUTTON6    0x00000020
253#define UPIO_BUTTON7    0x00000040
254#define UPIO_BUTTON8    0x00000080
255
256typedef void (tUPIO_CBACK)(tUPIO_TYPE type, tUPIO pio, tUPIO_STATE state);
257
258#ifdef __cplusplus
259extern "C" {
260#endif
261
262/* API functions for UPIO driver */
263
264/*****************************************************************************
265**
266** Function         UPIO_Init
267**
268** Description
269**      Initialize the GPIO service.
270**      This function is typically called once upon system startup.
271**
272** Returns          nothing
273**
274*****************************************************************************/
275UDRV_API void UPIO_Init(void *p_cfg);
276
277
278/*****************************************************************************
279**
280** Function         UPIO_Set
281**
282** Description
283**      This function sets one or more GPIO devices to the given state.
284**      Multiple GPIOs of the same type can be masked together to set more
285**      than one GPIO. This function can only be used on types UPIO_LED and
286**      UPIO_GENERAL.
287**
288** Input Parameters:
289**      type    The type of device.
290**      pio     Indicates the particular GPIOs.
291**      state   The desired state.
292**
293** Output Parameter:
294**      None.
295**
296** Returns:
297**      None.
298**
299*****************************************************************************/
300UDRV_API void UPIO_Set(tUPIO_TYPE type, tUPIO pio, tUPIO_STATE state);
301
302
303/*****************************************************************************
304**
305** Function         UPIO_Read
306**
307** Description
308**      Read the state of a GPIO. This function can be used for any type of
309**      device. Parameter pio can only indicate a single GPIO; multiple GPIOs
310**      cannot be masked together.
311**
312** Input Parameters:
313**      Type:	The type of device.
314**      pio:    Indicates the particular GUPIO.
315**
316** Output Parameter:
317**      None.
318**
319** Returns:
320**      State of GPIO (UPIO_ON or UPIO_OFF).
321**
322*****************************************************************************/
323UDRV_API tUPIO_STATE UPIO_Read(tUPIO_TYPE type, tUPIO pio);
324
325
326/*****************************************************************************
327**
328** Function         UPIO_Config
329**
330** Description      - Configure GPIOs of type UPIO_GENERAL as inputs or outputs
331**                  - Configure GPIOs to be polled or interrupt driven
332**
333**                  Currently only support polled GPIOs.
334**
335** Input Parameters:
336**      type    The type of device.
337**      pio     Indicates the particular GPIOs.
338**      config
339**      cback
340**
341** Output Parameter:
342**      None.
343**
344** Returns:
345**      None.
346**
347*****************************************************************************/
348UDRV_API void UPIO_Config(tUPIO_TYPE type, tUPIO pio, tUPIO_CONFIG config, tUPIO_CBACK *cback);
349
350
351/*****************************************************************************
352**
353** Function         UPIO_Feature
354**
355** Description
356**      Checks whether a feature of the pio API is supported
357**
358** Input Parameter:
359**      feature     The feature to check
360**
361** Output Parameter:
362**      None.
363**
364** Returns:
365**      TRUE if feature is supported, FALSE if it is not.
366**
367*****************************************************************************/
368UDRV_API BOOLEAN UPIO_Feature(tUPIO_FEATURE feature);
369
370#ifdef __cplusplus
371}
372#endif
373
374#endif  /* ifdef UPIO_H */
375