AudioSystem.h revision 492e666e47795326f4b12b87b150b550e6074bd8 
1/*
2 * Copyright (C) 2008 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 *      http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17#ifndef ANDROID_AUDIOSYSTEM_H_
18#define ANDROID_AUDIOSYSTEM_H_
19
20#include <utils/RefBase.h>
21#include <utils/threads.h>
22#include <media/IAudioFlinger.h>
23
24namespace android {
25
26typedef void (*audio_error_callback)(status_t err);
27typedef int audio_io_handle_t;
28
29class IAudioPolicyService;
30class String8;
31
32class AudioSystem
33{
34public:
35
36    enum stream_type {
37        DEFAULT          =-1,
38        VOICE_CALL       = 0,
39        SYSTEM           = 1,
40        RING             = 2,
41        MUSIC            = 3,
42        ALARM            = 4,
43        NOTIFICATION     = 5,
44        BLUETOOTH_SCO    = 6,
45        ENFORCED_AUDIBLE = 7, // Sounds that cannot be muted by user and must be routed to speaker
46        DTMF             = 8,
47        TTS              = 9,
48        NUM_STREAM_TYPES
49    };
50
51    // Audio sub formats (see AudioSystem::audio_format).
52    enum pcm_sub_format {
53        PCM_SUB_16_BIT          = 0x1, // must be 1 for backward compatibility
54        PCM_SUB_8_BIT           = 0x2, // must be 2 for backward compatibility
55    };
56
57    // MP3 sub format field definition : can use 11 LSBs in the same way as MP3 frame header to specify
58    // bit rate, stereo mode, version...
59    enum mp3_sub_format {
60        //TODO
61    };
62
63    // AMR NB/WB sub format field definition: specify frame block interleaving, bandwidth efficient or octet aligned,
64    // encoding mode for recording...
65    enum amr_sub_format {
66        //TODO
67    };
68
69    // AAC sub format field definition: specify profile or bitrate for recording...
70    enum aac_sub_format {
71        //TODO
72    };
73
74    // VORBIS sub format field definition: specify quality for recording...
75    enum vorbis_sub_format {
76        //TODO
77    };
78
79    // Audio format consists in a main format field (upper 8 bits) and a sub format field (lower 24 bits).
80    // The main format indicates the main codec type. The sub format field indicates options and parameters
81    // for each format. The sub format is mainly used for record to indicate for instance the requested bitrate
82    // or profile. It can also be used for certain formats to give informations not present in the encoded
83    // audio stream (e.g. octet alignement for AMR).
84    enum audio_format {
85        INVALID_FORMAT      = -1,
86        FORMAT_DEFAULT      = 0,
87        PCM                 = 0x00000000, // must be 0 for backward compatibility
88        MP3                 = 0x01000000,
89        AMR_NB              = 0x02000000,
90        AMR_WB              = 0x03000000,
91        AAC                 = 0x04000000,
92        HE_AAC_V1           = 0x05000000,
93        HE_AAC_V2           = 0x06000000,
94        VORBIS              = 0x07000000,
95        MAIN_FORMAT_MASK    = 0xFF000000,
96        SUB_FORMAT_MASK     = 0x00FFFFFF,
97        // Aliases
98        PCM_16_BIT          = (PCM|PCM_SUB_16_BIT),
99        PCM_8_BIT          = (PCM|PCM_SUB_8_BIT)
100    };
101
102
103    // Channel mask definitions must be kept in sync with JAVA values in /media/java/android/media/AudioFormat.java
104    enum audio_channels {
105        // output channels
106        CHANNEL_OUT_FRONT_LEFT = 0x4,
107        CHANNEL_OUT_FRONT_RIGHT = 0x8,
108        CHANNEL_OUT_FRONT_CENTER = 0x10,
109        CHANNEL_OUT_LOW_FREQUENCY = 0x20,
110        CHANNEL_OUT_BACK_LEFT = 0x40,
111        CHANNEL_OUT_BACK_RIGHT = 0x80,
112        CHANNEL_OUT_FRONT_LEFT_OF_CENTER = 0x100,
113        CHANNEL_OUT_FRONT_RIGHT_OF_CENTER = 0x200,
114        CHANNEL_OUT_BACK_CENTER = 0x400,
115        CHANNEL_OUT_MONO = CHANNEL_OUT_FRONT_LEFT,
116        CHANNEL_OUT_STEREO = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT),
117        CHANNEL_OUT_QUAD = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT |
118                CHANNEL_OUT_BACK_LEFT | CHANNEL_OUT_BACK_RIGHT),
119        CHANNEL_OUT_SURROUND = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT |
120                CHANNEL_OUT_FRONT_CENTER | CHANNEL_OUT_BACK_CENTER),
121        CHANNEL_OUT_5POINT1 = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT |
122                CHANNEL_OUT_FRONT_CENTER | CHANNEL_OUT_LOW_FREQUENCY | CHANNEL_OUT_BACK_LEFT | CHANNEL_OUT_BACK_RIGHT),
123        CHANNEL_OUT_7POINT1 = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT |
124                CHANNEL_OUT_FRONT_CENTER | CHANNEL_OUT_LOW_FREQUENCY | CHANNEL_OUT_BACK_LEFT | CHANNEL_OUT_BACK_RIGHT |
125                CHANNEL_OUT_FRONT_LEFT_OF_CENTER | CHANNEL_OUT_FRONT_RIGHT_OF_CENTER),
126        CHANNEL_OUT_ALL = (CHANNEL_OUT_FRONT_LEFT | CHANNEL_OUT_FRONT_RIGHT |
127                CHANNEL_OUT_FRONT_CENTER | CHANNEL_OUT_LOW_FREQUENCY | CHANNEL_OUT_BACK_LEFT | CHANNEL_OUT_BACK_RIGHT |
128                CHANNEL_OUT_FRONT_LEFT_OF_CENTER | CHANNEL_OUT_FRONT_RIGHT_OF_CENTER | CHANNEL_OUT_BACK_CENTER),
129
130        // input channels
131        CHANNEL_IN_LEFT = 0x4,
132        CHANNEL_IN_RIGHT = 0x8,
133        CHANNEL_IN_FRONT = 0x10,
134        CHANNEL_IN_BACK = 0x20,
135        CHANNEL_IN_LEFT_PROCESSED = 0x40,
136        CHANNEL_IN_RIGHT_PROCESSED = 0x80,
137        CHANNEL_IN_FRONT_PROCESSED = 0x100,
138        CHANNEL_IN_BACK_PROCESSED = 0x200,
139        CHANNEL_IN_PRESSURE = 0x400,
140        CHANNEL_IN_X_AXIS = 0x800,
141        CHANNEL_IN_Y_AXIS = 0x1000,
142        CHANNEL_IN_Z_AXIS = 0x2000,
143        CHANNEL_IN_VOICE_UPLINK = 0x4000,
144        CHANNEL_IN_VOICE_DNLINK = 0x8000,
145        CHANNEL_IN_MONO = CHANNEL_IN_FRONT,
146        CHANNEL_IN_STEREO = (CHANNEL_IN_LEFT | CHANNEL_IN_RIGHT),
147        CHANNEL_IN_ALL = (CHANNEL_IN_LEFT | CHANNEL_IN_RIGHT | CHANNEL_IN_FRONT | CHANNEL_IN_BACK|
148                CHANNEL_IN_LEFT_PROCESSED | CHANNEL_IN_RIGHT_PROCESSED | CHANNEL_IN_FRONT_PROCESSED | CHANNEL_IN_BACK_PROCESSED|
149                CHANNEL_IN_PRESSURE | CHANNEL_IN_X_AXIS | CHANNEL_IN_Y_AXIS | CHANNEL_IN_Z_AXIS |
150                CHANNEL_IN_VOICE_UPLINK | CHANNEL_IN_VOICE_DNLINK)
151    };
152
153    enum audio_mode {
154        MODE_INVALID = -2,
155        MODE_CURRENT = -1,
156        MODE_NORMAL = 0,
157        MODE_RINGTONE,
158        MODE_IN_CALL,
159        NUM_MODES  // not a valid entry, denotes end-of-list
160    };
161
162    enum audio_in_acoustics {
163        AGC_ENABLE    = 0x0001,
164        AGC_DISABLE   = 0,
165        NS_ENABLE     = 0x0002,
166        NS_DISABLE    = 0,
167        TX_IIR_ENABLE = 0x0004,
168        TX_DISABLE    = 0
169    };
170
171    /* These are static methods to control the system-wide AudioFlinger
172     * only privileged processes can have access to them
173     */
174
175    // mute/unmute microphone
176    static status_t muteMicrophone(bool state);
177    static status_t isMicrophoneMuted(bool *state);
178
179    // set/get master volume
180    static status_t setMasterVolume(float value);
181    static status_t getMasterVolume(float* volume);
182    // mute/unmute audio outputs
183    static status_t setMasterMute(bool mute);
184    static status_t getMasterMute(bool* mute);
185
186    // set/get stream volume on specified output
187    static status_t setStreamVolume(int stream, float value, int output);
188    static status_t getStreamVolume(int stream, float* volume, int output);
189
190    // mute/unmute stream
191    static status_t setStreamMute(int stream, bool mute);
192    static status_t getStreamMute(int stream, bool* mute);
193
194    // set audio mode in audio hardware (see AudioSystem::audio_mode)
195    static status_t setMode(int mode);
196
197    // returns true if tracks are active on AudioSystem::MUSIC stream
198    static status_t isMusicActive(bool *state);
199
200    // set/get audio hardware parameters. The function accepts a list of parameters
201    // key value pairs in the form: key1=value1;key2=value2;...
202    // Some keys are reserved for standard parameters (See AudioParameter class).
203    static status_t setParameters(audio_io_handle_t ioHandle, const String8& keyValuePairs);
204    static String8  getParameters(audio_io_handle_t ioHandle, const String8& keys);
205
206    static void setErrorCallback(audio_error_callback cb);
207
208    // helper function to obtain AudioFlinger service handle
209    static const sp<IAudioFlinger>& get_audio_flinger();
210
211    static float linearToLog(int volume);
212    static int logToLinear(float volume);
213
214    static status_t getOutputSamplingRate(int* samplingRate, int stream = DEFAULT);
215    static status_t getOutputFrameCount(int* frameCount, int stream = DEFAULT);
216    static status_t getOutputLatency(uint32_t* latency, int stream = DEFAULT);
217
218    static bool routedToA2dpOutput(int streamType);
219
220    static status_t getInputBufferSize(uint32_t sampleRate, int format, int channelCount,
221        size_t* buffSize);
222
223    static status_t setVoiceVolume(float volume);
224
225    //
226    // AudioPolicyService interface
227    //
228
229    enum audio_devices {
230        // output devices
231        DEVICE_OUT_EARPIECE = 0x1,
232        DEVICE_OUT_SPEAKER = 0x2,
233        DEVICE_OUT_WIRED_HEADSET = 0x4,
234        DEVICE_OUT_WIRED_HEADPHONE = 0x8,
235        DEVICE_OUT_BLUETOOTH_SCO = 0x10,
236        DEVICE_OUT_BLUETOOTH_SCO_HEADSET = 0x20,
237        DEVICE_OUT_BLUETOOTH_SCO_CARKIT = 0x40,
238        DEVICE_OUT_BLUETOOTH_A2DP = 0x80,
239        DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES = 0x100,
240        DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER = 0x200,
241        DEVICE_OUT_AUX_DIGITAL = 0x400,
242        DEVICE_OUT_DEFAULT = 0x8000,
243        DEVICE_OUT_ALL = (DEVICE_OUT_EARPIECE | DEVICE_OUT_SPEAKER | DEVICE_OUT_WIRED_HEADSET |
244                DEVICE_OUT_WIRED_HEADPHONE | DEVICE_OUT_BLUETOOTH_SCO | DEVICE_OUT_BLUETOOTH_SCO_HEADSET |
245                DEVICE_OUT_BLUETOOTH_SCO_CARKIT | DEVICE_OUT_BLUETOOTH_A2DP | DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES |
246                DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER | DEVICE_OUT_AUX_DIGITAL | DEVICE_OUT_DEFAULT),
247        DEVICE_OUT_ALL_A2DP = (DEVICE_OUT_BLUETOOTH_A2DP | DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES |
248                DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER),
249
250        // input devices
251        DEVICE_IN_COMMUNICATION = 0x10000,
252        DEVICE_IN_AMBIENT = 0x20000,
253        DEVICE_IN_BUILTIN_MIC = 0x40000,
254        DEVICE_IN_BLUETOOTH_SCO_HEADSET = 0x80000,
255        DEVICE_IN_WIRED_HEADSET = 0x100000,
256        DEVICE_IN_AUX_DIGITAL = 0x200000,
257        DEVICE_IN_VOICE_CALL = 0x400000,
258        DEVICE_IN_BACK_MIC = 0x800000,
259        DEVICE_IN_DEFAULT = 0x80000000,
260
261        DEVICE_IN_ALL = (DEVICE_IN_COMMUNICATION | DEVICE_IN_AMBIENT | DEVICE_IN_BUILTIN_MIC |
262                DEVICE_IN_BLUETOOTH_SCO_HEADSET | DEVICE_IN_WIRED_HEADSET | DEVICE_IN_AUX_DIGITAL |
263                DEVICE_IN_VOICE_CALL | DEVICE_IN_BACK_MIC | DEVICE_IN_DEFAULT)
264    };
265
266    // device connection states used for setDeviceConnectionState()
267    enum device_connection_state {
268        DEVICE_STATE_UNAVAILABLE,
269        DEVICE_STATE_AVAILABLE,
270        NUM_DEVICE_STATES
271    };
272
273    // request to open a direct output with getOutput() (by opposition to sharing an output with other AudioTracks)
274    enum output_flags {
275        OUTPUT_FLAG_INDIRECT = 0x0,
276        OUTPUT_FLAG_DIRECT = 0x1
277    };
278
279    // device categories used for setForceUse()
280    enum forced_config {
281        FORCE_NONE,
282        FORCE_SPEAKER,
283        FORCE_HEADPHONES,
284        FORCE_BT_SCO,
285        FORCE_BT_A2DP,
286        FORCE_WIRED_ACCESSORY,
287        FORCE_BT_CAR_DOCK,
288        FORCE_BT_DESK_DOCK,
289        NUM_FORCE_CONFIG,
290        FORCE_DEFAULT = FORCE_NONE
291    };
292
293    // usages used for setForceUse()
294    enum force_use {
295        FOR_COMMUNICATION,
296        FOR_MEDIA,
297        FOR_RECORD,
298        FOR_DOCK,
299        NUM_FORCE_USE
300    };
301
302    // types of io configuration change events received with ioConfigChanged()
303    enum io_config_event {
304        OUTPUT_OPENED,
305        OUTPUT_CLOSED,
306        OUTPUT_CONFIG_CHANGED,
307        INPUT_OPENED,
308        INPUT_CLOSED,
309        INPUT_CONFIG_CHANGED,
310        STREAM_CONFIG_CHANGED,
311        NUM_CONFIG_EVENTS
312    };
313
314    // audio output descritor used to cache output configurations in client process to avoid frequent calls
315    // through IAudioFlinger
316    class OutputDescriptor {
317    public:
318        OutputDescriptor()
319        : samplingRate(0), format(0), channels(0), frameCount(0), latency(0)  {}
320
321        uint32_t samplingRate;
322        int32_t format;
323        int32_t channels;
324        size_t frameCount;
325        uint32_t latency;
326    };
327
328    //
329    // IAudioPolicyService interface (see AudioPolicyInterface for method descriptions)
330    //
331    static status_t setDeviceConnectionState(audio_devices device, device_connection_state state, const char *device_address);
332    static device_connection_state getDeviceConnectionState(audio_devices device, const char *device_address);
333    static status_t setPhoneState(int state);
334    static status_t setRingerMode(uint32_t mode, uint32_t mask);
335    static status_t setForceUse(force_use usage, forced_config config);
336    static forced_config getForceUse(force_use usage);
337    static audio_io_handle_t getOutput(stream_type stream,
338                                        uint32_t samplingRate = 0,
339                                        uint32_t format = FORMAT_DEFAULT,
340                                        uint32_t channels = CHANNEL_OUT_STEREO,
341                                        output_flags flags = OUTPUT_FLAG_INDIRECT);
342    static status_t startOutput(audio_io_handle_t output, AudioSystem::stream_type stream);
343    static status_t stopOutput(audio_io_handle_t output, AudioSystem::stream_type stream);
344    static void releaseOutput(audio_io_handle_t output);
345    static audio_io_handle_t getInput(int inputSource,
346                                    uint32_t samplingRate = 0,
347                                    uint32_t format = FORMAT_DEFAULT,
348                                    uint32_t channels = CHANNEL_IN_MONO,
349                                    audio_in_acoustics acoustics = (audio_in_acoustics)0);
350    static status_t startInput(audio_io_handle_t input);
351    static status_t stopInput(audio_io_handle_t input);
352    static void releaseInput(audio_io_handle_t input);
353    static status_t initStreamVolume(stream_type stream,
354                                      int indexMin,
355                                      int indexMax);
356    static status_t setStreamVolumeIndex(stream_type stream, int index);
357    static status_t getStreamVolumeIndex(stream_type stream, int *index);
358
359    static const sp<IAudioPolicyService>& get_audio_policy_service();
360
361    // ----------------------------------------------------------------------------
362
363    static uint32_t popCount(uint32_t u);
364    static bool isOutputDevice(audio_devices device);
365    static bool isInputDevice(audio_devices device);
366    static bool isA2dpDevice(audio_devices device);
367    static bool isBluetoothScoDevice(audio_devices device);
368    static bool isLowVisibility(stream_type stream);
369    static bool isOutputChannel(uint32_t channel);
370    static bool isInputChannel(uint32_t channel);
371    static bool isValidFormat(uint32_t format);
372    static bool isLinearPCM(uint32_t format);
373
374private:
375
376    class AudioFlingerClient: public IBinder::DeathRecipient, public BnAudioFlingerClient
377    {
378    public:
379        AudioFlingerClient() {
380        }
381
382        // DeathRecipient
383        virtual void binderDied(const wp<IBinder>& who);
384
385        // IAudioFlingerClient
386
387        // indicate a change in the configuration of an output or input: keeps the cached
388        // values for output/input parameters upto date in client process
389        virtual void ioConfigChanged(int event, int ioHandle, void *param2);
390    };
391
392    class AudioPolicyServiceClient: public IBinder::DeathRecipient
393    {
394    public:
395        AudioPolicyServiceClient() {
396        }
397
398        // DeathRecipient
399        virtual void binderDied(const wp<IBinder>& who);
400    };
401
402    static sp<AudioFlingerClient> gAudioFlingerClient;
403    static sp<AudioPolicyServiceClient> gAudioPolicyServiceClient;
404    friend class AudioFlingerClient;
405    friend class AudioPolicyServiceClient;
406
407    static Mutex gLock;
408    static sp<IAudioFlinger> gAudioFlinger;
409    static audio_error_callback gAudioErrorCallback;
410
411    static size_t gInBuffSize;
412    // previous parameters for recording buffer size queries
413    static uint32_t gPrevInSamplingRate;
414    static int gPrevInFormat;
415    static int gPrevInChannelCount;
416
417    static sp<IAudioPolicyService> gAudioPolicyService;
418
419    // mapping between stream types and outputs
420    static DefaultKeyedVector<int, audio_io_handle_t> gStreamOutputMap;
421    // list of output descritor containing cached parameters (sampling rate, framecount, channel count...)
422    static DefaultKeyedVector<audio_io_handle_t, OutputDescriptor *> gOutputs;
423};
424
425class AudioParameter {
426
427public:
428    AudioParameter() {}
429    AudioParameter(const String8& keyValuePairs);
430    virtual ~AudioParameter();
431
432    // reserved parameter keys for changeing standard parameters with setParameters() function.
433    // Using these keys is mandatory for AudioFlinger to properly monitor audio output/input
434    // configuration changes and act accordingly.
435    //  keyRouting: to change audio routing, value is an int in AudioSystem::audio_devices
436    //  keySamplingRate: to change sampling rate routing, value is an int
437    //  keyFormat: to change audio format, value is an int in AudioSystem::audio_format
438    //  keyChannels: to change audio channel configuration, value is an int in AudioSystem::audio_channels
439    //  keyFrameCount: to change audio output frame count, value is an int
440    static const char *keyRouting;
441    static const char *keySamplingRate;
442    static const char *keyFormat;
443    static const char *keyChannels;
444    static const char *keyFrameCount;
445
446    String8 toString();
447
448    status_t add(const String8& key, const String8& value);
449    status_t addInt(const String8& key, const int value);
450    status_t addFloat(const String8& key, const float value);
451
452    status_t remove(const String8& key);
453
454    status_t get(const String8& key, String8& value);
455    status_t getInt(const String8& key, int& value);
456    status_t getFloat(const String8& key, float& value);
457    status_t getAt(size_t index, String8& key, String8& value);
458
459    size_t size() { return mParameters.size(); }
460
461private:
462    String8 mKeyValuePairs;
463    KeyedVector <String8, String8> mParameters;
464};
465
466};  // namespace android
467
468#endif  /*ANDROID_AUDIOSYSTEM_H_*/
469