/external/android-clat/ |
H A D | config.h | 30 int16_t mtu, ipv4mtu; member in struct:clat_config
|
H A D | setif.c | 94 * sets interface link state to up and sets mtu, returns 0 on success and <0 on failure 96 * mtu - new mtu 98 int if_up(const char *ifname, int mtu) { argument 117 if(nla_put(msg, IFLA_MTU, 4, &mtu) < 0) {
|
H A D | setroute.c | 41 * mtu - route-specific mtu or 0 for the interface mtu 44 int if_route(const char *ifname, int family, const void *destination, int prefixlen, const void *gateway, int metric, int mtu, int change_type) { argument 119 if(mtu > 0 && change_type != ROUTE_DELETE) { 127 if(nla_put(msg, RTAX_MTU, 4, &mtu) < 0) {
|
/external/libppp/src/ |
H A D | iface.h | 41 unsigned long mtu; /* struct tuninfo MTU */ member in struct:iface
|
/external/tcpdump/ |
H A D | print-igrp.c | 48 u_int metric, mtu; local 65 mtu = EXTRACT_16BITS(igr->igr_mtu); 67 printf(" d=%d b=%d r=%d l=%d M=%d mtu=%d in %d hops", 70 mtu, igr->igr_hct);
|
/external/bluetooth/bluedroid/stack/avct/ |
H A D | avct_api.c | 54 void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask) argument 86 if (mtu < AVCT_MIN_CONTROL_MTU) 87 mtu = AVCT_MIN_CONTROL_MTU; 88 /* store mtu */ 89 avct_cb.mtu = mtu;
|
H A D | avct_int.h | 63 UINT16 peer_mtu; /* peer l2c mtu */ 74 UINT16 peer_mtu; /* peer l2c mtu */ 90 UINT16 peer_mtu; /* peer l2c mtu */ 135 UINT16 mtu; /* our L2CAP MTU */ member in struct:__anon1075
|
/external/chromium_org/third_party/mesa/src/src/mesa/drivers/dri/r200/ |
H A D | r200_cmdbuf.c | 57 int i, mtu; local 59 mtu = rmesa->radeon.glCtx->Const.MaxTextureUnits; 83 for (i = 0; i < mtu; ++i) 85 for (i = 0; i < mtu; ++i) 94 for (i = 0; i < 3 + mtu; ++i)
|
/external/mesa3d/src/mesa/drivers/dri/r200/ |
H A D | r200_cmdbuf.c | 57 int i, mtu; local 59 mtu = rmesa->radeon.glCtx->Const.MaxTextureUnits; 83 for (i = 0; i < mtu; ++i) 85 for (i = 0; i < mtu; ++i) 94 for (i = 0; i < 3 + mtu; ++i)
|
/external/bluetooth/bluedroid/bta/ar/ |
H A D | bta_ar.c | 203 void bta_ar_reg_avct(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask, tBTA_SYS_ID sys_id) argument 211 AVCT_Register(mtu, mtu_br, sec_mask);
|
/external/bluetooth/bluedroid/stack/rfcomm/ |
H A D | rfc_port_if.c | 82 void RFCOMM_DlcEstablishReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu) argument 104 void RFCOMM_DlcEstablishRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result) argument 129 void RFCOMM_ParNegReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu) argument 163 rfc_send_pn (p_mcb, dlci, TRUE, mtu, cl, k); 177 void RFCOMM_ParNegRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k) argument 183 rfc_send_pn (p_mcb, dlci, FALSE, mtu, cl, k);
|
H A D | port_rfc.c | 77 RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu); 215 RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu); 293 void PORT_ParNegInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k) argument 299 RFCOMM_TRACE_EVENT2 ("PORT_ParNegInd dlci:%d mtu:%d", dlci, mtu); 324 p_port->mtu = (p_port->mtu < mtu) ? p_port->mtu : mtu; 384 PORT_ParNegCnf(tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k) argument 445 PORT_DlcEstablishInd(tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu) argument 497 PORT_DlcEstablishCnf(tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result) argument [all...] |
H A D | rfc_ts_frames.c | 231 void rfc_send_pn (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command, UINT16 mtu, UINT8 cl, UINT8 k) argument 257 *p_data++ = mtu & 0xFF; 258 *p_data++ = mtu >> 8; 749 p_rx_frame->u.pn.mtu = *p_data + (*(p_data + 1) << 8); 756 || (p_rx_frame->u.pn.mtu < RFCOMM_MIN_MTU) 757 || (p_rx_frame->u.pn.mtu > RFCOMM_MAX_MTU))
|
/external/chromium_org/third_party/mesa/src/src/mesa/drivers/dri/radeon/ |
H A D | radeon_ioctl.c | 67 int i, mtu = rmesa->radeon.glCtx->Const.MaxTextureUnits; local 79 for (i = 0; i < mtu; ++i) { 86 for (i = 0; i < 3 + mtu; ++i)
|
/external/iproute2/tc/ |
H A D | m_police.c | 37 fprintf(stderr, "Usage: ... police rate BPS burst BYTES[/BYTES] [ mtu BYTES[/BYTES] ]\n"); 136 unsigned buffer=0, mtu=0, mpu=0; local 171 } else if (strcmp(*argv, "mtu") == 0 || 174 if (mtu) { 175 fprintf(stderr, "Double \"mtu/minburst\" spec\n"); 178 if (get_size_and_cell(&mtu, &Pcell_log, *argv) < 0) { 179 explain1("mtu"); 271 if (!mtu) { 272 fprintf(stderr, "\"mtu\" is required, if \"peakrate\" is requested.\n"); 280 if (tc_calc_rtable(&p.rate, rtab, Rcell_log, mtu, linklaye [all...] |
H A D | q_htb.c | 39 " [ceil R2] [cburst B2] [mtu MTU] [quantum Q]\n" 47 " mtu max packet size we create rate map for {1600}\n" 108 unsigned mtu; local 114 memset(&opt, 0, sizeof(opt)); mtu = 1600; /* eth packet len */ 123 } else if (matches(*argv, "mtu") == 0) { 125 if (get_u32(&mtu, *argv, 10)) { 126 explain1("mtu"); return -1; 209 /* compute minimal allowed burst from rate; mtu is added here to make 210 sute that buffer is larger than mtu and to have some safeguard space */ 211 if (!buffer) buffer = opt.rate.rate / get_hz() + mtu; [all...] |
H A D | q_tbf.c | 28 fprintf(stderr, "Usage: ... tbf limit BYTES burst BYTES[/BYTES] rate KBPS [ mtu BYTES[/BYTES] ]\n"); 45 unsigned buffer=0, mtu=0, mpu=0, latency=0; local 89 } else if (strcmp(*argv, "mtu") == 0 || 92 if (mtu) { 93 fprintf(stderr, "Double \"mtu/minburst\" spec\n"); 96 if (get_size_and_cell(&mtu, &Pcell_log, *argv) < 0) { 97 explain1("mtu"); 169 if (!mtu) { 170 fprintf(stderr, "\"mtu\" is required, if \"peakrate\" is requested.\n"); 183 double lim2 = opt.peakrate.rate*(double)latency/TIME_UNITS_PER_SEC + mtu; 222 double buffer, mtu; local [all...] |
H A D | tc_core.c | 110 int cell_log, unsigned mtu, 118 if (mtu == 0) 119 mtu = 2047; 123 while ((mtu >> cell_log) > 255) 149 s->mtu = 0; 157 if (s->mtu == 0) 158 s->mtu = 2047; 163 while ((s->mtu >> s->cell_log) > s->tsize - 1) 109 tc_calc_rtable(struct tc_ratespec *r, __u32 *rtab, int cell_log, unsigned mtu, enum link_layer linklayer) argument
|
/external/mesa3d/src/mesa/drivers/dri/radeon/ |
H A D | radeon_ioctl.c | 67 int i, mtu = rmesa->radeon.glCtx->Const.MaxTextureUnits; local 79 for (i = 0; i < mtu; ++i) { 86 for (i = 0; i < 3 + mtu; ++i)
|
/external/ppp/pppd/plugins/pppoatm/ |
H A D | pppoatm.c | 172 static void send_config_pppoa(int mtu, argument 179 if (mtu > pppoatm_max_mtu) 180 error("Couldn't increase MTU to %d", mtu); 185 ifr.ifr_mtu = mtu;
|
/external/ppp/pppd/plugins/rp-pppoe/ |
H A D | plugin.c | 185 PPPOESendConfig(int mtu, argument 193 if (mtu > MAX_PPPOE_MTU) { 194 warn("Couldn't increase MTU to %d", mtu); 195 mtu = MAX_PPPOE_MTU; 203 ifr.ifr_mtu = mtu; 205 error("Couldn't set interface MTU to %d: %m", mtu);
|
/external/bluetooth/bluedroid/stack/bnep/ |
H A D | bnep_main.c | 85 bnep_cb.l2cap_my_cfg.mtu = BNEP_MTU_SIZE; 217 UINT16 result, mtu = 0; local 229 if ((!p_cfg->mtu_present) || (p_cfg->mtu < BNEP_MIN_MTU_SIZE)) 231 mtu = p_cfg->mtu; 234 p_cfg->mtu = BNEP_MIN_MTU_SIZE; 239 if (p_cfg->mtu > BNEP_MTU_SIZE) 242 p_bcb->rem_mtu_size = p_cfg->mtu; 254 BNEP_TRACE_EVENT2 ("BNEP - Rcvd cfg ind with bad MTU %d, CID: 0x%x", mtu, l2cap_cid);
|
/external/chromium/third_party/libjingle/source/talk/base/ |
H A D | asyncsocket.h | 104 virtual int EstimateMTU(uint16* mtu) { argument 105 return socket_->EstimateMTU(mtu);
|
/external/chromium_org/ppapi/proxy/ |
H A D | serialized_structs.h | 71 int mtu; member in struct:ppapi::proxy::SerializedNetworkInfo
|
/external/chromium_org/third_party/libjingle/source/talk/base/ |
H A D | asyncsocket.h | 112 virtual int EstimateMTU(uint16* mtu) { argument 113 return socket_->EstimateMTU(mtu);
|