/* * Copyright (C) 2013 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package com.android.bluetooth.mapapi; import android.content.ContentResolver; import android.net.Uri; /** * This class defines the minimum sets of data needed for an E-mail client to * implement to claim support for the Bluetooth Message Access Profile. * Access to three data sets are needed: *
<provider android:authorities="[PROVIDER AUTHORITY]" android:exported="true" android:enabled="true" android:permission="android.permission.BLUETOOTH_MAP"> * ... * <intent-filter> <action android:name="android.content.action.BLEUETOOT_MAP_PROVIDER" /> </intent-filter> * ... * </provider> * [PROVIDER AUTHORITY] shall be the providers authority value which implements this * contract. Only a single authority shall be used. The android.permission.BLUETOOTH_MAP * permission is needed for the provider. */ public final class BluetoothMapContract { /** * Constructor - should not be used */ private BluetoothMapContract(){ /* class should not be instantiated */ } /** * Provider interface that should be used as intent-filter action in the provider section * of the manifest file. */ public static final String PROVIDER_INTERFACE = "android.bluetooth.action.BLUETOOTH_MAP_PROVIDER"; /** * The Bluetooth Message Access profile allows a remote BT-MAP client to trigger * an update of a folder for a specific e-mail account, register for reception * of new messages from the server. * * Additionally the Bluetooth Message Access profile allows a remote BT-MAP client * to push a message to a folder - e.g. outbox or draft. The Bluetooth profile * implementation will place a new message in one of these existing folders through * the content provider. * * ContentProvider.call() is used for these purposes, and the METHOD_UPDATE_FOLDER * method name shall trigger an update of the specified folder for a specified * account. * * This shall be a non blocking call simply starting the update, and the update should * both send and receive messages, depending on what makes sense for the specified * folder. * Bundle extra parameter will carry two INTEGER (long) values: * EXTRA_UPDATE_ACCOUNT_ID containing the account_id * EXTRA_UPDATE_FOLDER_ID containing the folder_id of the folder to update * * The status for send complete of messages shall be reported by updating the sent-flag * and e.g. for outbox messages, move them to the sent folder in the message table of the * content provider and trigger a change notification to any attached content observer. */ public static final String METHOD_UPDATE_FOLDER = "UpdateFolder"; public static final String EXTRA_UPDATE_ACCOUNT_ID = "UpdateAccountId"; public static final String EXTRA_UPDATE_FOLDER_ID = "UpdateFolderId"; /** * These column names are used as last path segment of the URI (getLastPathSegment()). * Access to a specific row in the tables is done by using the where-clause, hence * support for .../#id if not needed for the Email clients. * The URI format for accessing the tables are as follows: * content://ProviderAuthority/TABLE_ACCOUNT * content://ProviderAuthority/account_id/TABLE_MESSAGE * content://ProviderAuthority/account_id/TABLE_FOLDER */ /** * Build URI representing the given Accounts data-set in a * bluetooth provider. When queried, the direct URI for the account * with the given accountID is returned. */ public static Uri buildAccountUri(String authority) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority).appendPath(TABLE_ACCOUNT).build(); } /** * Build URI representing the given Account data-set with specific Id in a * Bluetooth provider. When queried, the direct URI for the account * with the given accountID is returned. */ public static Uri buildAccountUriwithId(String authority, String accountId) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority) .appendPath(TABLE_ACCOUNT) .appendPath(accountId) .build(); } /** * Build URI representing the entire Message table in a * bluetooth provider. */ public static Uri buildMessageUri(String authority) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority) .appendPath(TABLE_MESSAGE) .build(); } /** * Build URI representing the given Message data-set in a * bluetooth provider. When queried, the URI for the Messages * with the given accountID is returned. */ public static Uri buildMessageUri(String authority, String accountId) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority) .appendPath(accountId) .appendPath(TABLE_MESSAGE) .build(); } /** * Build URI representing the given Message data-set with specific messageId in a * bluetooth provider. When queried, the direct URI for the account * with the given accountID is returned. */ public static Uri buildMessageUriWithId(String authority, String accountId,String messageId) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority) .appendPath(accountId) .appendPath(TABLE_MESSAGE) .appendPath(messageId) .build(); } /** * Build URI representing the given Message data-set in a * bluetooth provider. When queried, the direct URI for the account * with the given accountID is returned. */ public static Uri buildFolderUri(String authority, String accountId) { return new Uri.Builder().scheme(ContentResolver.SCHEME_CONTENT) .authority(authority) .appendPath(accountId) .appendPath(TABLE_FOLDER) .build(); } /** * @hide */ public static final String TABLE_ACCOUNT = "Account"; public static final String TABLE_MESSAGE = "Message"; public static final String TABLE_FOLDER = "Folder"; /** * Mandatory folders for the Bluetooth message access profile. * The email client shall at least implement the following root folders. * E.g. as a mapping for them such that the naming will match the underlying * matching folder ID's. */ public static final String FOLDER_NAME_INBOX = "inbox"; public static final String FOLDER_NAME_OUTBOX = "outbox"; public static final String FOLDER_NAME_SENT = "sent"; public static final String FOLDER_NAME_DELETED = "deleted"; public static final String FOLDER_NAME_DRAFT = "draft"; /** * To push RFC2822 encoded messages into a folder and read RFC2822 encoded messages from * a folder, the openFile() interface will be used as follows: * Open a file descriptor to a message. * Two modes supported for read: With and without attachments. * One mode exist for write and the actual content will be with or without * attachments. * * mode will be "r" for read and "w" for write, never "rw". * * URI format: * The URI scheme is as follows. * For reading messages with attachments: * content://ProviderAuthority/account_id/TABLE_MESSAGE/msgId * Note: This shall be an offline operation, including only message parts and attachments * already downloaded to the device. * * For reading messages without attachments: * content://ProviderAuthority/account_id/TABLE_MESSAGE/msgId/FILE_MSG_NO_ATTACHMENTS * Note: This shall be an offline operation, including only message parts already * downloaded to the device. * * For downloading and reading messages with attachments: * content://ProviderAuthority/account_id/TABLE_MESSAGE/msgId/FILE_MSG_DOWNLOAD * Note: This shall download the message content and all attachments if possible, * else throw an IOException. * * For downloading and reading messages without attachments: * content://ProviderAuthority/account_id/TABLE_MESSAGE/msgId/FILE_MSG_DOWNLOAD_NO_ATTACHMENTS * Note: This shall download the message content if possible, else throw an IOException. * * When reading from the file descriptor, the content provider shall return a stream * of bytes containing a RFC2822 encoded message, as if the message was send to an email * server. * * When a byte stream is written to the file descriptor, the content provider shall * decode the RFC2822 encoded data and insert the message into the TABLE_MESSAGE at the ID * supplied in URI - additionally the message content shall be stored in the underlying * data base structure as if the message was received from an email server. The Message ID * will be created using a insert on the TABLE_MESSAGE prior to calling openFile(). * Hence the procedure for inserting a message is: * - uri/msgId = insert(uri, value: folderId=xxx) * - fd = openFile(uri/msgId) * - fd.write (RFC2822 encoded data) * * The Bluetooth Message Access Client might not know what to put into the From: * header nor have a valid time stamp, hence the content provider shall check * if the From: and Date: headers have been set by the message written, else * it must fill in appropriate values. */ public static final String FILE_MSG_NO_ATTACHMENTS = "NO_ATTACHMENTS"; public static final String FILE_MSG_DOWNLOAD = "DOWNLOAD"; public static final String FILE_MSG_DOWNLOAD_NO_ATTACHMENTS = "DOWNLOAD_NO_ATTACHMENTS"; /** * Account Table * The columns needed to supply account information. * The e-mail client app may choose to expose all e-mails as being from the same account, * but it is not recommended, as this would be a violation of the Bluetooth specification. * The Bluetooth Message Access settings activity will provide the user the ability to * change the FLAG_EXPOSE values for each account in this table. * The Bluetooth Message Access service will read the values when Bluetooth is turned on, * and again on every notified change through the content observer interface. */ public interface AccountColumns { /** * The unique ID for a row. *Type: INTEGER (long)
*/ public static final String _ID = "_id"; /** * The account name to display to the user on the device when selecting whether * or not to share the account over Bluetooth. * * The account display name should not reveal any sensitive information e.g. email- * address, as it will be added to the Bluetooth SDP record, which can be read by * any Bluetooth enabled device. (Access to any account content is only provided to * authenticated devices). It is recommended that if the email client uses the email * address as account name, then the address should be obfuscated (i.e. replace "@" * with ".") *Type: TEXT
* read-only */ public static final String ACCOUNT_DISPLAY_NAME = "account_display_name"; /** * Expose this account to other authenticated Bluetooth devices. If the expose flag * is set, this account will be listed as an available account to access from another * Bluetooth device. * * This is a read/write flag, that can be set either from within the E-mail client * UI or the Bluetooth settings menu. * * It is recommended to either ask the user whether to expose the account, or set this * to "show" as default. * * This setting shall not be used to enforce whether or not an account should be shared * or not if the account is bound by an administrative security policy. In this case * the email app should not list the account at all if it is not to be shareable over BT. * *Type: INTEGER (boolean) hide = 0, show = 1
*/ public static final String FLAG_EXPOSE = "flag_expose"; } /** * The actual message table containing all messages. * Content that must support filtering using WHERE clauses: * - To, From, Cc, Bcc, Date, ReadFlag, PriorityFlag, folder_id, account_id * Additional content that must be supplied: * - Subject, AttachmentFlag, LoadedState, MessageSize, AttachmentSize * Content that must support update: * - FLAG_READ and FOLDER_ID (FOLDER_ID is used to move a message to deleted) * Additional insert of a new message with the following values shall be supported: * - FOLDER_ID * * When doing an insert on this table, the actual content of the message (subject, * date etc) written through file-i/o takes precedence over the inserted values and should * overwrite them. */ public interface MessageColumns { /** * The unique ID for a row. *Type: INTEGER (long)
*/ public static final String _ID = "_id"; /** * The date the message was received as a unix timestamp * (miliseconds since 00:00:00 UTC 1/1-1970). * *Type: INTEGER (long)
* read-only */ public static final String DATE = "date"; /** * Message subject. *Type: TEXT
* read-only. */ public static final String SUBJECT = "subject"; /** * Message Read flag *Type: INTEGER (boolean) unread = 0, read = 1
* read/write */ public static final String FLAG_READ = "flag_read"; /** * Message Priority flag *Type: INTEGER (boolean) normal priority = 0, high priority = 1
* read-only */ public static final String FLAG_HIGH_PRIORITY = "high_priority"; /** * Reception state - the amount of the message that have been loaded from the server. *Type: INTEGER see RECEPTION_STATE_ constants below
* read-only */ public static final String RECEPTION_STATE = "reception_state"; /** To be able to filter messages with attachments, we need this flag. *Type: INTEGER (boolean) no attachment = 0, attachment = 1
* read-only */ public static final String FLAG_ATTACHMENT = "flag_attachment"; /** The overall size in bytes of the attachments of the message. *Type: INTEGER
*/ public static final String ATTACHMENT_SIZE = "attachment_size"; /** The overall size in bytes of the message including any attachments. * This value is informative only and should be the size an email client * would display as size for the message. *Type: INTEGER
* read-only */ public static final String MESSAGE_SIZE = "message_size"; /** Indicates that the message or a part of it is protected by a DRM scheme. *Type: INTEGER (boolean) no DRM = 0, DRM protected = 1
* read-only */ public static final String FLAG_PROTECTED = "flag_protected"; /** * A comma-delimited list of FROM addresses in RFC2822 format. * The list must be compatible with Rfc822Tokenizer.tokenize(); *Type: TEXT
* read-only */ public static final String FROM_LIST = "from_list"; /** * A comma-delimited list of TO addresses in RFC2822 format. * The list must be compatible with Rfc822Tokenizer.tokenize(); *Type: TEXT
* read-only */ public static final String TO_LIST = "to_list"; /** * A comma-delimited list of CC addresses in RFC2822 format. * The list must be compatible with Rfc822Tokenizer.tokenize(); *Type: TEXT
* read-only */ public static final String CC_LIST = "cc_list"; /** * A comma-delimited list of BCC addresses in RFC2822 format. * The list must be compatible with Rfc822Tokenizer.tokenize(); *Type: TEXT
* read-only */ public static final String BCC_LIST = "bcc_list"; /** * A comma-delimited list of REPLY-TO addresses in RFC2822 format. * The list must be compatible with Rfc822Tokenizer.tokenize(); *Type: TEXT
* read-only */ public static final String REPLY_TO_LIST = "reply_to_List"; /** * The unique ID for a row in the folder table in which this message belongs. *Type: INTEGER (long)
* read/write */ public static final String FOLDER_ID = "folder_id"; /** * The unique ID for a row in the account table which owns this message. *Type: INTEGER (long)
* read-only */ public static final String ACCOUNT_ID = "account_id"; /** * The ID identify the thread a message belongs to. If no thread id is available, * set value to "-1" *Type: INTEGER (long)
* read-only */ public static final String THREAD_ID = "thread_id"; } /** * Indicates that the message, including any attachments, has been received from the * server to the device. */ public static final String RECEPTION_STATE_COMPLETE = "complete"; /** * Indicates the message is partially received from the email server. */ public static final String RECEPTION_STATE_FRACTIONED = "fractioned"; /** * Indicates that only a notification about the message have been received. */ public static final String RECEPTION_STATE_NOTIFICATION = "notification"; /** * Message folder structure * MAP enforces use of a folder structure with mandatory folders: * - inbox, outbox, sent, deleted, draft * User defined folders are supported. * The folder table must provide filtering (use of WHERE clauses) of the following entries: * - account_id (linking the folder to an e-mail account) * - parent_id (linking the folders individually) * The folder table must have a folder name for each entry, and the mandatory folders * MUST exist for each account_id. The folders may be empty. * Use the FOLDER_NAME_xxx constants for the mandatory folders. Their names must * not be translated into other languages, as the folder browsing is string based, and * many Bluetooth Message Clients will use these strings to navigate to the folders. */ public interface FolderColumns { /** * The unique ID for a row. *Type: INTEGER (long)
* read-only */ public static final String _ID = "_id"; /** * The folder display name to present to the user. *Type: TEXT
* read-only */ public static final String NAME = "name"; /** * The _id-key to the account this folder refers to. *Type: INTEGER (long)
* read-only */ public static final String ACCOUNT_ID = "account_id"; /** * The _id-key to the parent folder. -1 for root folders. *Type: INTEGER (long)
* read-only */ public static final String PARENT_FOLDER_ID = "parent_id"; } /** * A projection of all the columns in the Message table */ public static final String[] BT_MESSAGE_PROJECTION = new String[] { MessageColumns._ID, MessageColumns.DATE, MessageColumns.SUBJECT, MessageColumns.FLAG_READ, MessageColumns.FLAG_ATTACHMENT, MessageColumns.FOLDER_ID, MessageColumns.ACCOUNT_ID, MessageColumns.FROM_LIST, MessageColumns.TO_LIST, MessageColumns.CC_LIST, MessageColumns.BCC_LIST, MessageColumns.REPLY_TO_LIST, MessageColumns.FLAG_PROTECTED, MessageColumns.FLAG_HIGH_PRIORITY, MessageColumns.MESSAGE_SIZE, MessageColumns.ATTACHMENT_SIZE, MessageColumns.RECEPTION_STATE, MessageColumns.THREAD_ID }; /** * A projection of all the columns in the Account table */ public static final String[] BT_ACCOUNT_PROJECTION = new String[] { AccountColumns._ID, AccountColumns.ACCOUNT_DISPLAY_NAME, AccountColumns.FLAG_EXPOSE, }; /** * A projection of all the columns in the Folder table */ public static final String[] BT_FOLDER_PROJECTION = new String[] { FolderColumns._ID, FolderColumns.NAME, FolderColumns.ACCOUNT_ID, FolderColumns.PARENT_FOLDER_ID }; }