Android.common_test.mk revision 8a14b75d876ad20f08087664070354fa6f65a029
1# 2# Copyright (C) 2011 The Android Open Source Project 3# 4# Licensed under the Apache License, Version 2.0 (the "License"); 5# you may not use this file except in compliance with the License. 6# You may obtain a copy of the License at 7# 8# http://www.apache.org/licenses/LICENSE-2.0 9# 10# Unless required by applicable law or agreed to in writing, software 11# distributed under the License is distributed on an "AS IS" BASIS, 12# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13# See the License for the specific language governing permissions and 14# limitations under the License. 15# 16 17ifndef ANDROID_COMMON_TEST_MK 18ANDROID_COMMON_TEST_MK = true 19 20include art/build/Android.common_path.mk 21 22# List of known broken tests that we won't attempt to execute. The test name must be the full 23# rule name such as test-art-host-oat-optimizing-HelloWorld64. 24ART_TEST_KNOWN_BROKEN := \ 25 test-art-host-oat-optimizing-SignalTest64 \ 26 test-art-host-oat-optimizing-SignalTest32 \ 27 test-art-target-oat-optimizing-SignalTest32 28 29# List of known failing tests that when executed won't cause test execution to not finish. 30# The test name must be the full rule name such as test-art-host-oat-optimizing-HelloWorld64. 31ART_TEST_KNOWN_FAILING := 32 33# Keep going after encountering a test failure? 34ART_TEST_KEEP_GOING ?= false 35 36# Do you want all tests, even those that are time consuming? 37ART_TEST_FULL ?= true 38 39# Do you want optimizing compiler tests run? 40ART_TEST_OPTIMIZING ?= $(ART_TEST_FULL) 41 42# Do you want tracing tests run? 43ART_TEST_TRACE ?= $(ART_TEST_FULL) 44 45# Do you want tests with GC verification enabled run? 46ART_TEST_GC_VERIFY ?= $(ART_TEST_FULL) 47 48# Do you want tests with the GC stress mode enabled run? 49ART_TEST_GC_STRESS ?= $(ART_TEST_FULL) 50 51# Define the command run on test failure. $(1) is the name of the test. Executed by the shell. 52define ART_TEST_FAILED 53 ( [ -f $(ART_HOST_TEST_DIR)/skipped/$(1) ] || \ 54 (mkdir -p $(ART_HOST_TEST_DIR)/failed/ && touch $(ART_HOST_TEST_DIR)/failed/$(1) && \ 55 echo $(ART_TEST_KNOWN_FAILING) | grep -q $(1) \ 56 && (echo -e "$(1) \e[91mKNOWN FAILURE\e[0m") \ 57 || (echo -e "$(1) \e[91mFAILED\e[0m"))) 58endef 59 60# Define the command run on test success. $(1) is the name of the test. Executed by the shell. 61# The command checks prints "PASSED" then checks to see if this was a top-level make target (e.g. 62# "mm test-art-host-oat-HelloWorld32"), if it was then it does nothing, otherwise it creates a file 63# to be printed in the passing test summary. 64define ART_TEST_PASSED 65 ( echo -e "$(1) \e[92mPASSED\e[0m" && \ 66 (echo $(MAKECMDGOALS) | grep -q $(1) || \ 67 (mkdir -p $(ART_HOST_TEST_DIR)/passed/ && touch $(ART_HOST_TEST_DIR)/passed/$(1)))) 68endef 69 70# Define the command run on test success of multiple prerequisites. $(1) is the name of the test. 71# When the test is a top-level make target then a summary of the ran tests is produced. Executed by 72# the shell. 73define ART_TEST_PREREQ_FINISHED 74 (echo -e "$(1) \e[32mCOMPLETE\e[0m" && \ 75 (echo $(MAKECMDGOALS) | grep -q -v $(1) || \ 76 (([ -d $(ART_HOST_TEST_DIR)/passed/ ] \ 77 && (echo -e "\e[92mPASSING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/passed/) \ 78 || (echo -e "\e[91mNO TESTS PASSED\e[0m")) && \ 79 ([ -d $(ART_HOST_TEST_DIR)/skipped/ ] \ 80 && (echo -e "\e[93mSKIPPED TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/skipped/) \ 81 || (echo -e "\e[92mNO TESTS SKIPPED\e[0m")) && \ 82 ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \ 83 && (echo -e "\e[91mFAILING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/failed/) \ 84 || (echo -e "\e[92mNO TESTS FAILED\e[0m")) \ 85 && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] && rm -r $(ART_HOST_TEST_DIR) \ 86 || (rm -r $(ART_HOST_TEST_DIR) && false))))) 87endef 88 89# Define the command executed by the shell ahead of running an art test. $(1) is the name of the 90# test. 91define ART_TEST_SKIP 92 ((echo $(ART_TEST_KNOWN_BROKEN) | grep -q -v $(1) \ 93 && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] || [ $(ART_TEST_KEEP_GOING) = true ])\ 94 && echo -e "$(1) \e[95mRUNNING\e[0m") \ 95 || ((mkdir -p $(ART_HOST_TEST_DIR)/skipped/ && touch $(ART_HOST_TEST_DIR)/skipped/$(1) \ 96 && ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \ 97 && echo -e "$(1) \e[93mSKIPPING DUE TO EARLIER FAILURE\e[0m") \ 98 || echo -e "$(1) \e[93mSKIPPING BROKEN TEST\e[0m") && false)) 99endef 100 101# Create a build rule to create the dex file for a test. 102# $(1): module prefix, e.g. art-test-dex 103# $(2): input test directory in art/test, e.g. HelloWorld 104# $(3): target output module path (default module path is used on host) 105# $(4): additional dependencies 106# $(5): a make variable used to collate target dependencies, e.g ART_TEST_TARGET_OAT_HelloWorld_DEX 107# $(6): a make variable used to collate host dependencies, e.g ART_TEST_HOST_OAT_HelloWorld_DEX 108define build-art-test-dex 109 ifeq ($(ART_BUILD_TARGET),true) 110 include $(CLEAR_VARS) 111 LOCAL_MODULE := $(1)-$(2) 112 LOCAL_SRC_FILES := $(call all-java-files-under, $(2)) 113 LOCAL_NO_STANDARD_LIBRARIES := true 114 LOCAL_DEX_PREOPT := false 115 LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4) 116 LOCAL_MODULE_TAGS := tests 117 LOCAL_JAVA_LIBRARIES := $(TARGET_CORE_JARS) 118 LOCAL_MODULE_PATH := $(3) 119 LOCAL_DEX_PREOPT_IMAGE_LOCATION := $(TARGET_CORE_IMG_OUT) 120 include $(BUILD_JAVA_LIBRARY) 121 $(5) := $$(LOCAL_INSTALLED_MODULE) 122 endif 123 ifeq ($(ART_BUILD_HOST),true) 124 include $(CLEAR_VARS) 125 LOCAL_MODULE := $(1)-$(2) 126 LOCAL_SRC_FILES := $(call all-java-files-under, $(2)) 127 LOCAL_NO_STANDARD_LIBRARIES := true 128 LOCAL_DEX_PREOPT := false 129 LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4) 130 LOCAL_JAVA_LIBRARIES := $(HOST_CORE_JARS) 131 LOCAL_DEX_PREOPT_IMAGE := $(HOST_CORE_IMG_LOCATION) 132 include $(BUILD_HOST_DALVIK_JAVA_LIBRARY) 133 $(6) := $$(LOCAL_INSTALLED_MODULE) 134 endif 135endef 136 137endif # ANDROID_COMMON_TEST_MK 138