cleanbuild.mk revision 6ea58cb3dc564ce112b28f1a7c6936317168d931
1# Copyright (C) 2007 The Android Open Source Project 2# 3# Licensed under the Apache License, Version 2.0 (the "License"); 4# you may not use this file except in compliance with the License. 5# You may obtain a copy of the License at 6# 7# http://www.apache.org/licenses/LICENSE-2.0 8# 9# Unless required by applicable law or agreed to in writing, software 10# distributed under the License is distributed on an "AS IS" BASIS, 11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 12# See the License for the specific language governing permissions and 13# limitations under the License. 14# 15 16INTERNAL_CLEAN_STEPS := 17 18# Builds up a list of clean steps. Creates a unique 19# id for each step by taking makefile path, INTERNAL_CLEAN_BUILD_VERSION 20# and appending an increasing number of '@' characters. 21# 22# $(1): shell command to run 23# $(2): indicate to not use makefile path as part of step id if not empty. 24# $(2) should only be used in build/core/cleanspec.mk: just for compatibility. 25define _add-clean-step 26 $(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \ 27 $(error INTERNAL_CLEAN_BUILD_VERSION not set)) 28 $(eval _acs_makefile_prefix := $(lastword $(MAKEFILE_LIST))) 29 $(eval _acs_makefile_prefix := $(subst /,_,$(_acs_makefile_prefix))) 30 $(eval _acs_makefile_prefix := $(subst .,-,$(_acs_makefile_prefix))) 31 $(eval _acs_makefile_prefix := $(_acs_makefile_prefix)_acs) 32 $(if $($(_acs_makefile_prefix)),,\ 33 $(eval $(_acs_makefile_prefix) := $(INTERNAL_CLEAN_BUILD_VERSION))) 34 $(eval $(_acs_makefile_prefix) := $($(_acs_makefile_prefix))@) 35 $(if $(strip $(2)),$(eval _acs_id := $($(_acs_makefile_prefix))),\ 36 $(eval _acs_id := $(_acs_makefile_prefix)$($(_acs_makefile_prefix)))) 37 $(eval INTERNAL_CLEAN_STEPS += $(_acs_id)) 38 $(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1)) 39 $(eval _acs_id :=) 40 $(eval _acs_makefile_prefix :=) 41endef 42define add-clean-step 43$(eval # for build/core/cleanspec.mk, dont use makefile path as part of step id) \ 44$(if $(filter %/cleanspec.mk,$(lastword $(MAKEFILE_LIST))),\ 45 $(eval $(call _add-clean-step,$(1),true)),\ 46 $(eval $(call _add-clean-step,$(1)))) 47endef 48 49# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps. 50# cleanspec.mk is outside of the core directory so that more people 51# can have permission to touch it. 52include $(BUILD_SYSTEM)/cleanspec.mk 53INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION)) 54 55# If the clean_steps.mk file is missing (usually after a clean build) 56# then we won't do anything. 57CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION) 58CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS) 59 60# Read the current state from the file, if present. 61# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS. 62# 63clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk 64-include $(clean_steps_file) 65 66ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION)) 67 # The major clean version is out-of-date. Do a full clean, and 68 # don't even bother with the clean steps. 69 $(info *** A clean build is required because of a recent change.) 70 $(shell rm -rf $(OUT_DIR)) 71 $(info *** Done with the cleaning, now starting the real build.) 72else 73 # The major clean version is correct. Find the list of clean steps 74 # that we need to execute to get up-to-date. 75 steps := \ 76 $(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS)) 77 $(foreach step,$(steps), \ 78 $(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \ 79 $(shell $(INTERNAL_CLEAN_STEP.$(step))) \ 80 ) 81 # If we are running mm/mmm, we should copy over the other clean steps too. 82 ifneq ($(ONE_SHOT_MAKEFILE),) 83 INTERNAL_CLEAN_STEPS := $(strip $(CURRENT_CLEAN_STEPS) $(steps)) 84 endif 85 steps := 86endif 87CURRENT_CLEAN_BUILD_VERSION := 88CURRENT_CLEAN_STEPS := 89 90# Write the new state to the file. 91# 92$(shell \ 93 mkdir -p $(dir $(clean_steps_file)) && \ 94 echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \ 95 $(clean_steps_file) ;\ 96 echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \ 97 $(clean_steps_file) \ 98 ) 99 100clean_steps_file := 101INTERNAL_CLEAN_STEPS := 102INTERNAL_CLEAN_BUILD_VERSION := 103 104 105# Since products and build variants (unfortunately) share the same 106# PRODUCT_OUT staging directory, things can get out of sync if different 107# build configurations are built in the same tree. The following logic 108# will notice when the configuration has changed and remove the files 109# necessary to keep things consistent. 110 111previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk 112 113# TODO: this special case for the sdk is only necessary while "sdk" 114# is a valid make target. Eventually, it will just be a product, at 115# which point TARGET_PRODUCT will handle it and we can avoid this check 116# of MAKECMDGOALS. The "addprefix" is just to keep things pretty. 117ifneq ($(TARGET_PRODUCT),sdk) 118 building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS))) 119else 120 # Don't bother with this extra part when explicitly building the sdk product. 121 building_sdk := 122endif 123 124# A change in the list of aapt configs warrants an installclean, too. 125aapt_config_list := $(strip $(PRODUCT_AAPT_CONFIG) $(PRODUCT_AAPT_PREF_CONFIG)) 126 127current_build_config := \ 128 $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(aapt_config_list)} 129building_sdk := 130aapt_config_list := 131force_installclean := false 132 133# Read the current state from the file, if present. 134# Will set PREVIOUS_BUILD_CONFIG. 135# 136PREVIOUS_BUILD_CONFIG := 137-include $(previous_build_config_file) 138PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG)) 139ifdef PREVIOUS_BUILD_CONFIG 140 ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)" 141 $(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)") 142 ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true) 143 force_installclean := true 144 else 145 $(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.) 146 endif 147 endif 148endif # else, this is the first build, so no need to clean. 149PREVIOUS_BUILD_CONFIG := 150 151# Write the new state to the file. 152# 153$(shell \ 154 mkdir -p $(dir $(previous_build_config_file)) && \ 155 echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \ 156 $(previous_build_config_file) \ 157 ) 158previous_build_config_file := 159current_build_config := 160 161# 162# installclean logic 163# 164 165# The files/dirs to delete during an installclean. This includes the 166# non-common APPS directory, which may contain the wrong resources. 167# 168# Deletes all of the files that change between different build types, 169# like "make user" vs. "make sdk". This lets you work with different 170# build types without having to do a full clean each time. E.g.: 171# 172# $ make -j8 all 173# $ make installclean 174# $ make -j8 user 175# $ make installclean 176# $ make -j8 sdk 177# 178installclean_files := \ 179 $(HOST_OUT)/obj/NOTICE_FILES \ 180 $(HOST_OUT)/sdk \ 181 $(PRODUCT_OUT)/*.img \ 182 $(PRODUCT_OUT)/*.txt \ 183 $(PRODUCT_OUT)/*.xlb \ 184 $(PRODUCT_OUT)/*.zip \ 185 $(PRODUCT_OUT)/data \ 186 $(PRODUCT_OUT)/obj/APPS \ 187 $(PRODUCT_OUT)/obj/NOTICE_FILES \ 188 $(PRODUCT_OUT)/obj/PACKAGING \ 189 $(PRODUCT_OUT)/recovery \ 190 $(PRODUCT_OUT)/root \ 191 $(PRODUCT_OUT)/system \ 192 $(PRODUCT_OUT)/dex_bootjars \ 193 $(PRODUCT_OUT)/obj/JAVA_LIBRARIES \ 194 $(PRODUCT_OUT)/obj/FAKE \ 195 $(PRODUCT_OUT)/obj/EXECUTABLES/adbd_intermediates \ 196 $(PRODUCT_OUT)/obj/EXECUTABLES/init_intermediates 197 198 199# The files/dirs to delete during a dataclean, which removes any files 200# in the staging and emulator data partitions. 201dataclean_files := \ 202 $(PRODUCT_OUT)/data/* \ 203 $(PRODUCT_OUT)/data-qemu/* \ 204 $(PRODUCT_OUT)/userdata-qemu.img 205 206# make sure *_OUT is set so that we won't result in deleting random parts 207# of the filesystem. 208ifneq (2,$(words $(HOST_OUT) $(PRODUCT_OUT))) 209 $(error both HOST_OUT and PRODUCT_OUT should be set at this point.) 210endif 211 212# Define the rules for commandline invocation. 213.PHONY: dataclean 214dataclean: FILES := $(dataclean_files) 215dataclean: 216 $(hide) rm -rf $(FILES) 217 @echo "Deleted emulator userdata images." 218 219.PHONY: installclean 220installclean: FILES := $(installclean_files) 221installclean: dataclean 222 $(hide) rm -rf $(FILES) 223 @echo "Deleted images and staging directories." 224 225ifeq "$(force_installclean)" "true" 226 $(info *** Forcing "make installclean"...) 227 $(info *** rm -rf $(dataclean_files) $(installclean_files)) 228 $(shell rm -rf $(dataclean_files) $(installclean_files)) 229 $(info *** Done with the cleaning, now starting the real build.) 230endif 231force_installclean := 232