main.mk revision 6bce2058567443a02cf80ee3692ff97139b63579
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128## user/userdebug ## 129 130user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 131enable_target_debugging := true 132ifneq (,$(user_variant)) 133 # Target is secure in user builds. 134 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 135 136 tags_to_install := user 137 ifeq ($(user_variant),userdebug) 138 # Pick up some extra useful tools 139 tags_to_install += debug 140 else 141 # Disable debugging in plain user builds. 142 enable_target_debugging := 143 endif 144 145 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 146 # Also, remove the corresponding block in config/product_config.make. 147 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 148 WITH_DEXPREOPT := true 149 endif 150 151 # Disallow mock locations by default for user builds 152 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 153 154else # !user_variant 155 # Turn on checkjni for non-user builds. 156 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 157 # Set device insecure for non-user builds. 158 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 159 # Allow mock locations by default for non user builds 160 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 161endif # !user_variant 162 163ifeq (true,$(strip $(enable_target_debugging))) 164 # Target is more debuggable and adbd is on by default 165 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 166 # Include the debugging/testing OTA keys in this build. 167 INCLUDE_TEST_OTA_KEYS := true 168else # !enable_target_debugging 169 # Target is less debuggable and adbd is off by default 170 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 171endif # !enable_target_debugging 172 173## eng ## 174 175ifeq ($(TARGET_BUILD_VARIANT),eng) 176tags_to_install := user debug eng 177 # Don't require the setup wizard on eng builds 178 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 179 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 180endif 181 182## tests ## 183 184ifeq ($(TARGET_BUILD_VARIANT),tests) 185tags_to_install := user debug eng tests 186endif 187 188## sdk ## 189 190ifneq ($(filter sdk,$(MAKECMDGOALS)),) 191ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 192$(error The 'sdk' target may not be specified with any other targets) 193endif 194# TODO: this should be eng I think. Since the sdk is built from the eng 195# variant. 196tags_to_install := user 197ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 198ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 199else # !sdk 200# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 201ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 202endif 203 204# Install an apns-conf.xml file if one's not already being installed. 205ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 206 PRODUCT_COPY_FILES += \ 207 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 208 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 209 $(warning implicitly installing apns-conf_sdk.xml) 210 endif 211endif 212# If we're on an eng or tests build, but not on the sdk, and we have 213# a better one, use that instead. 214ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 215 ifeq ($(filter sdk,$(MAKECMDGOALS)),) 216 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 217 ifneq ($(strip $(apns_to_use)),) 218 PRODUCT_COPY_FILES := \ 219 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 220 $(strip $(apns_to_use)):system/etc/apns-conf.xml 221 endif 222 endif 223endif 224 225ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 226 227# enable vm tracing in files for now to help track 228# the cause of ANRs in the content process 229ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 230 231 232# ------------------------------------------------------------ 233# Define a function that, given a list of module tags, returns 234# non-empty if that module should be installed in /system. 235 236# For most goals, anything not tagged with the "tests" tag should 237# be installed in /system. 238define should-install-to-system 239$(if $(filter tests,$(1)),,true) 240endef 241 242ifneq (,$(filter sdk,$(MAKECMDGOALS))) 243# For the sdk goal, anything with the "samples" tag should be 244# installed in /data even if that module also has "eng"/"debug"/"user". 245define should-install-to-system 246$(if $(filter samples tests,$(1)),,true) 247endef 248endif 249 250 251# If all they typed was make showcommands, we'll actually build 252# the default target. 253ifeq ($(MAKECMDGOALS),showcommands) 254.PHONY: showcommands 255showcommands: $(DEFAULT_GOAL) 256endif 257 258# These targets are going to delete stuff, don't bother including 259# the whole directory tree if that's all we're going to do 260ifeq ($(MAKECMDGOALS),clean) 261dont_bother := true 262endif 263ifeq ($(MAKECMDGOALS),clobber) 264dont_bother := true 265endif 266ifeq ($(MAKECMDGOALS),dataclean) 267dont_bother := true 268endif 269ifeq ($(MAKECMDGOALS),installclean) 270dont_bother := true 271endif 272 273# Bring in all modules that need to be built. 274ifneq ($(dont_bother),true) 275 276subdir_makefiles := 277 278ifeq ($(HOST_OS),windows) 279SDK_ONLY := true 280endif 281ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 282SDK_ONLY := true 283endif 284 285ifeq ($(SDK_ONLY),true) 286 287subdirs := \ 288 prebuilt \ 289 build/libs/host \ 290 dalvik/dexdump \ 291 dalvik/libdex \ 292 dalvik/tools/dmtracedump \ 293 development/emulator/mksdcard \ 294 development/tools/activitycreator \ 295 development/tools/line_endings \ 296 development/host \ 297 external/expat \ 298 external/libpng \ 299 external/qemu \ 300 external/sqlite/dist \ 301 external/zlib \ 302 frameworks/base/libs/utils \ 303 frameworks/base/tools/aapt \ 304 frameworks/base/tools/aidl \ 305 system/core/adb \ 306 system/core/fastboot \ 307 system/core/libcutils \ 308 system/core/liblog \ 309 system/core/libzipfile 310 311# The following can only be built if "javac" is available. 312# This check is used when building parts of the SDK under Cygwin. 313ifneq (,$(shell which javac 2>/dev/null)) 314$(warning sdk-only: javac available.) 315subdirs += \ 316 build/tools/signapk \ 317 build/tools/zipalign \ 318 dalvik/dx \ 319 dalvik/libcore \ 320 development/apps \ 321 development/tools/androidprefs \ 322 development/tools/apkbuilder \ 323 development/tools/jarutils \ 324 development/tools/layoutlib_utils \ 325 development/tools/ninepatch \ 326 development/tools/sdkstats \ 327 development/tools/sdkmanager \ 328 frameworks/base \ 329 frameworks/base/tools/layoutlib \ 330 external/googleclient \ 331 packages 332else 333$(warning sdk-only: javac not available.) 334endif 335 336# Exclude tools/acp when cross-compiling windows under linux 337ifeq ($(findstring Linux,$(UNAME)),) 338subdirs += build/tools/acp 339endif 340 341else # !SDK_ONLY 342ifeq ($(BUILD_TINY_ANDROID), true) 343 344# TINY_ANDROID is a super-minimal build configuration, handy for board 345# bringup and very low level debugging 346 347INTERNAL_DEFAULT_DOCS_TARGETS := 348 349subdirs := \ 350 bionic \ 351 system/core \ 352 build/libs \ 353 build/target \ 354 build/tools/acp \ 355 build/tools/apriori \ 356 build/tools/kcm \ 357 build/tools/soslim \ 358 external/elfcopy \ 359 external/elfutils \ 360 external/yaffs2 \ 361 external/zlib 362else # !BUILD_TINY_ANDROID 363 364# 365# Typical build; include any Android.mk files we can find. 366# 367INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 368subdirs := $(TOP) 369 370FULL_BUILD := true 371 372endif # !BUILD_TINY_ANDROID 373 374endif # !SDK_ONLY 375 376# Can't use first-makefiles-under here because 377# --mindepth=2 makes the prunes not work. 378subdir_makefiles += \ 379 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 380 381# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 382# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 383# make sure only one exists. 384# Real boards should always be associated with an OEM vendor. 385board_config_mk := \ 386 $(strip $(wildcard \ 387 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 388 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 389 )) 390ifeq ($(board_config_mk),) 391 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 392endif 393ifneq ($(words $(board_config_mk)),1) 394 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 395endif 396include $(board_config_mk) 397TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 398board_config_mk := 399 400# Clean up/verify variables defined by the board config file. 401TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 402 403# 404# Include all of the makefiles in the system 405# 406 407ifneq ($(ONE_SHOT_MAKEFILE),) 408# We've probably been invoked by the "mm" shell function 409# with a subdirectory's makefile. 410include $(ONE_SHOT_MAKEFILE) 411# Change CUSTOM_MODULES to include only modules that were 412# defined by this makefile; this will install all of those 413# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 414# so that the modules will be installed in the same place they 415# would have been with a normal make. 416CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 417FULL_BUILD := 418INTERNAL_DEFAULT_DOCS_TARGETS := 419# Stub out the notice targets, which probably aren't defined 420# when using ONE_SHOT_MAKEFILE. 421NOTICE-HOST-%: ; 422NOTICE-TARGET-%: ; 423else 424include $(subdir_makefiles) 425endif 426# ------------------------------------------------------------------- 427# All module makefiles have been included at this point. 428# ------------------------------------------------------------------- 429 430# ------------------------------------------------------------------- 431# Include any makefiles that must happen after the module makefiles 432# have been included. 433# TODO: have these files register themselves via a global var rather 434# than hard-coding the list here. 435ifdef FULL_BUILD 436 # Only include this during a full build, otherwise we can't be 437 # guaranteed that any policies were included. 438 -include frameworks/policies/base/PolicyConfig.mk 439endif 440 441# ------------------------------------------------------------------- 442# Fix up CUSTOM_MODULES to refer to installed files rather than 443# just bare module names. Leave unknown modules alone in case 444# they're actually full paths to a particular file. 445known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 446unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 447CUSTOM_MODULES := \ 448 $(call module-installed-files,$(known_custom_modules)) \ 449 $(unknown_custom_modules) 450 451# ------------------------------------------------------------------- 452# Define dependencies for modules that require other modules. 453# This can only happen now, after we've read in all module makefiles. 454# 455# TODO: deal with the fact that a bare module name isn't 456# unambiguous enough. Maybe declare short targets like 457# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 458# BUG: the system image won't know to depend on modules that are 459# brought in as requirements of other modules. 460define add-required-deps 461$(1): $(2) 462endef 463$(foreach m,$(ALL_MODULES), \ 464 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 465 $(if $(r), \ 466 $(eval r := $(call module-installed-files,$(r))) \ 467 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 468 ) \ 469 ) 470m := 471r := 472add-required-deps := 473 474# ------------------------------------------------------------------- 475# Figure out our module sets. 476 477# Of the modules defined by the component makefiles, 478# determine what we actually want to build. 479# If a module has the "restricted" tag on it, it 480# poisons the rest of the tags and shouldn't appear 481# on any list. 482Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 483 $(ALL_BUILT_MODULES) \ 484 $(CUSTOM_MODULES)) 485# TODO: Remove the 3 places in the tree that use 486# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 487 488ifdef FULL_BUILD 489 # The base list of modules to build for this product is specified 490 # by the appropriate product definition file, which was included 491 # by product_config.make. 492 user_PACKAGES := $(call module-installed-files, \ 493 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 494 ifeq (0,1) 495 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 496 $(foreach p,$(user_PACKAGES),$(info : $(p))) 497 $(error done) 498 endif 499else 500 # We're not doing a full build, and are probably only including 501 # a subset of the module makefiles. Don't try to build any modules 502 # requested by the product, because we probably won't have rules 503 # to build them. 504 user_PACKAGES := 505endif 506# Use tags to get the non-APPS user modules. Use the product 507# definition files to get the APPS user modules. 508user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 509user_MODULES := $(user_MODULES) $(user_PACKAGES) 510 511eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 512debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 513tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 514 515ifeq ($(strip $(tags_to_install)),) 516$(error ASSERTION FAILED: tags_to_install should not be empty) 517endif 518modules_to_install := $(sort $(Default_MODULES) \ 519 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 520 521# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 522# Filter out (do not install) any overridden packages. 523overridden_packages := $(call get-package-overrides,$(modules_to_install)) 524ifdef overridden_packages 525# old_modules_to_install := $(modules_to_install) 526 modules_to_install := \ 527 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 528 $(modules_to_install)) 529endif 530#$(error filtered out 531# $(filter-out $(modules_to_install),$(old_modules_to_install))) 532 533# Don't include any GNU targets in the SDK. It's ok (and necessary) 534# to build the host tools, but nothing that's going to be installed 535# on the target (including static libraries). 536ifneq ($(filter sdk,$(MAKECMDGOALS)),) 537 target_gnu_MODULES := \ 538 $(filter \ 539 $(TARGET_OUT_INTERMEDIATES)/% \ 540 $(TARGET_OUT)/% \ 541 $(TARGET_OUT_DATA)/%, \ 542 $(sort $(call get-tagged-modules,gnu))) 543 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 544 modules_to_install := \ 545 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 546endif 547 548 549# config/Makefile contains extra stuff that we don't want to pollute this 550# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 551# contains everything that's built during the current make, but it also further 552# extends ALL_DEFAULT_INSTALLED_MODULES. 553ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 554include $(BUILD_SYSTEM)/Makefile 555modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 556ALL_DEFAULT_INSTALLED_MODULES := 557 558endif # dont_bother 559 560# ------------------------------------------------------------------- 561# This is used to to get the ordering right, you can also use these, 562# but they're considered undocumented, so don't complain if their 563# behavior changes. 564.PHONY: prebuilt 565prebuilt: $(ALL_PREBUILT) 566 567# An internal target that depends on all copied headers 568# (see copy_headers.make). Other targets that need the 569# headers to be copied first can depend on this target. 570.PHONY: all_copied_headers 571all_copied_headers: ; 572 573$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 574 575# All the droid stuff, in directories 576.PHONY: files 577files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 578 579# ------------------------------------------------------------------- 580 581.PHONY: ramdisk 582ramdisk: $(INSTALLED_RAMDISK_TARGET) 583 584.PHONY: systemtarball 585systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 586 587.PHONY: userdataimage 588userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 589 590.PHONY: userdatatarball 591userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 592 593.PHONY: bootimage 594bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 595 596ifeq ($(BUILD_TINY_ANDROID), true) 597INSTALLED_RECOVERYIMAGE_TARGET := 598endif 599 600# Build files and then package it into the rom formats 601.PHONY: droidcore 602droidcore: files \ 603 systemimage \ 604 $(INSTALLED_BOOTIMAGE_TARGET) \ 605 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 606 $(INSTALLED_USERDATAIMAGE_TARGET) \ 607 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 608 $(INSTALLED_FILES_FILE) 609 610# The actual files built by the droidcore target changes depending 611# on the build variant. 612.PHONY: droid tests 613droid tests: droidcore 614 615$(call dist-for-goals, droid, \ 616 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 617 $(INTERNAL_OTA_PACKAGE_TARGET) \ 618 $(SYMBOLS_ZIP) \ 619 $(APPS_ZIP) \ 620 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 621 $(PACKAGE_STATS_FILE) \ 622 $(INSTALLED_FILES_FILE) \ 623 $(INSTALLED_BUILD_PROP_TARGET) \ 624 $(BUILT_TARGET_FILES_PACKAGE) \ 625 ) 626 627# Tests are installed in userdata.img. If we're building the tests 628# variant, copy it for "make tests dist". Also copy a zip of the 629# contents of userdata.img, so that people can easily extract a 630# single .apk. 631ifeq ($(TARGET_BUILD_VARIANT),tests) 632$(call dist-for-goals, droid, \ 633 $(INSTALLED_USERDATAIMAGE_TARGET) \ 634 $(BUILT_TESTS_ZIP_PACKAGE) \ 635 ) 636endif 637 638.PHONY: docs 639docs: $(ALL_DOCS) 640 641.PHONY: sdk 642ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 643sdk: $(ALL_SDK_TARGETS) 644$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 645 646.PHONY: findbugs 647findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 648 649.PHONY: clean 650dirs_to_clean := \ 651 $(PRODUCT_OUT) \ 652 $(TARGET_COMMON_OUT_ROOT) \ 653 $(HOST_OUT) \ 654 $(HOST_COMMON_OUT_ROOT) 655clean: 656 @for dir in $(dirs_to_clean) ; do \ 657 echo "Cleaning $$dir..."; \ 658 rm -rf $$dir; \ 659 done 660 @echo "Clean."; \ 661 662.PHONY: clobber 663clobber: 664 @rm -rf $(OUT_DIR) 665 @echo "Entire build directory removed." 666 667# The rules for dataclean and installclean are defined in cleanbuild.mk. 668 669#xxx scrape this from ALL_MODULE_NAME_TAGS 670.PHONY: modules 671modules: 672 @echo "Available sub-modules:" 673 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 674 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 675 676.PHONY: showcommands 677showcommands: 678 @echo >/dev/null 679 680