main.mk revision 7522f04a4b0327cf493dfe6c501634b2b1e1367a
1# Only use ANDROID_BUILD_SHELL to wrap around bash. 2# DO NOT use other shells such as zsh. 3ifdef ANDROID_BUILD_SHELL 4SHELL := $(ANDROID_BUILD_SHELL) 5else 6# Use bash, not whatever shell somebody has installed as /bin/sh 7# This is repeated in config.mk, since envsetup.sh runs that file 8# directly. 9SHELL := /bin/bash 10endif 11 12# this turns off the suffix rules built into make 13.SUFFIXES: 14 15# If a rule fails, delete $@. 16.DELETE_ON_ERROR: 17 18# Figure out where we are. 19#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 20#TOP := $(patsubst %/,%,$(TOP)) 21 22# TOPDIR is the normal variable you should use, because 23# if we are executing relative to the current directory 24# it can be "", whereas TOP must be "." which causes 25# pattern matching probles when make strips off the 26# trailing "./" from paths in various places. 27#ifeq ($(TOP),.) 28#TOPDIR := 29#else 30#TOPDIR := $(TOP)/ 31#endif 32 33# check for broken versions of make 34ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 35$(warning ********************************************************************************) 36$(warning * You are using version $(MAKE_VERSION) of make.) 37$(warning * You must upgrade to version 3.81 or greater.) 38$(warning * see http://source.android.com/source/download.html) 39$(warning ********************************************************************************) 40$(error stopping) 41endif 42 43TOP := . 44TOPDIR := 45 46BUILD_SYSTEM := $(TOPDIR)build/core 47 48# This is the default target. It must be the first declared target. 49.PHONY: droid 50DEFAULT_GOAL := droid 51$(DEFAULT_GOAL): 52 53# Used to force goals to build. Only use for conditionally defined goals. 54.PHONY: FORCE 55FORCE: 56 57# Set up various standard variables based on configuration 58# and host information. 59include $(BUILD_SYSTEM)/config.mk 60 61# This allows us to force a clean build - included after the config.make 62# environment setup is done, but before we generate any dependencies. This 63# file does the rm -rf inline so the deps which are all done below will 64# be generated correctly 65include $(BUILD_SYSTEM)/cleanbuild.mk 66 67VERSION_CHECK_SEQUENCE_NUMBER := 2 68-include $(OUT_DIR)/versions_checked.mk 69ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) 70 71$(info Checking build tools versions...) 72 73ifeq ($(BUILD_OS),linux) 74build_arch := $(shell uname -m) 75ifneq (64,$(findstring 64,$(build_arch))) 76$(warning ************************************************************) 77$(warning You are attempting to build on a 32-bit system.) 78$(warning Only 64-bit build environments are supported beyond froyo/2.2.) 79$(warning ************************************************************) 80$(error stop) 81endif 82endif 83 84ifneq ($(HOST_OS),windows) 85ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 86# check for a case sensitive file system 87ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 88 echo a > $(OUT_DIR)/casecheck.txt; \ 89 echo B > $(OUT_DIR)/CaseCheck.txt; \ 90 cat $(OUT_DIR)/casecheck.txt)) 91$(warning ************************************************************) 92$(warning You are building on a case-insensitive filesystem.) 93$(warning Please move your source tree to a case-sensitive filesystem.) 94$(warning ************************************************************) 95$(error Case-insensitive filesystems not supported) 96endif 97endif 98endif 99 100# Make sure that there are no spaces in the absolute path; the 101# build system can't deal with them. 102ifneq ($(words $(shell pwd)),1) 103$(warning ************************************************************) 104$(warning You are building in a directory whose absolute path contains) 105$(warning a space character:) 106$(warning $(space)) 107$(warning "$(shell pwd)") 108$(warning $(space)) 109$(warning Please move your source tree to a path that does not contain) 110$(warning any spaces.) 111$(warning ************************************************************) 112$(error Directory names containing spaces not supported) 113endif 114 115 116# Check for the correct version of java 117java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]') 118ifeq ($(strip $(java_version)),) 119$(info ************************************************************) 120$(info You are attempting to build with the incorrect version) 121$(info of java.) 122$(info $(space)) 123$(info Your version is: $(shell java -version 2>&1 | head -n 1).) 124$(info The correct version is: 1.6.) 125$(info $(space)) 126$(info Please follow the machine setup instructions at) 127$(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html) 128$(info ************************************************************) 129$(error stop) 130endif 131 132# Check for the correct version of javac 133javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]') 134ifeq ($(strip $(javac_version)),) 135$(info ************************************************************) 136$(info You are attempting to build with the incorrect version) 137$(info of javac.) 138$(info $(space)) 139$(info Your version is: $(shell javac -version 2>&1 | head -n 1).) 140$(info The correct version is: 1.6.) 141$(info $(space)) 142$(info Please follow the machine setup instructions at) 143$(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html) 144$(info ************************************************************) 145$(error stop) 146endif 147 148$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ 149 > $(OUT_DIR)/versions_checked.mk) 150endif 151 152# These are the modifier targets that don't do anything themselves, but 153# change the behavior of the build. 154# (must be defined before including definitions.make) 155INTERNAL_MODIFIER_TARGETS := showcommands checkbuild 156 157# Bring in standard build system definitions. 158include $(BUILD_SYSTEM)/definitions.mk 159 160# Bring in dex_preopt.mk 161include $(BUILD_SYSTEM)/dex_preopt.mk 162 163ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 164$(info ***************************************************************) 165$(info ***************************************************************) 166$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 167 the make command line.) 168# XXX The single quote on this line fixes gvim's syntax highlighting. 169# Without which, the rest of this file is impossible to read. 170$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 171$(info choosecombo.) 172$(info ***************************************************************) 173$(info ***************************************************************) 174$(error stopping) 175endif 176 177ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 178$(info ***************************************************************) 179$(info ***************************************************************) 180$(info Invalid variant: $(TARGET_BUILD_VARIANT) 181$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 182$(info ***************************************************************) 183$(info ***************************************************************) 184$(error stopping) 185endif 186 187### 188### In this section we set up the things that are different 189### between the build variants 190### 191 192is_sdk_build := 193ifneq ($(filter sdk,$(MAKECMDGOALS)),) 194is_sdk_build := true 195endif 196ifneq ($(filter win_sdk,$(MAKECMDGOALS)),) 197is_sdk_build := true 198endif 199ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 200is_sdk_build := true 201endif 202 203 204## user/userdebug ## 205 206user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 207enable_target_debugging := true 208ifneq (,$(user_variant)) 209 # Target is secure in user builds. 210 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 211 212 tags_to_install := user 213 ifeq ($(user_variant),userdebug) 214 # Pick up some extra useful tools 215 tags_to_install += debug 216 217 # Enable Dalvik lock contention logging for userdebug builds. 218 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500 219 else 220 # Disable debugging in plain user builds. 221 enable_target_debugging := 222 endif 223 224 # TODO: Remove this and the corresponding block in 225 # config/product_config.make once host-based Dalvik preoptimization is 226 # working. 227 ifneq (true,$(DISABLE_DEXPREOPT)) 228 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 229 WITH_DEXPREOPT := true 230 endif 231 endif 232 233 # Disallow mock locations by default for user builds 234 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 235 236else # !user_variant 237 # Turn on checkjni for non-user builds. 238 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 239 # Set device insecure for non-user builds. 240 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 241 # Allow mock locations by default for non user builds 242 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 243endif # !user_variant 244 245ifeq (true,$(strip $(enable_target_debugging))) 246 # Target is more debuggable and adbd is on by default 247 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 248 # Include the debugging/testing OTA keys in this build. 249 INCLUDE_TEST_OTA_KEYS := true 250else # !enable_target_debugging 251 # Target is less debuggable and adbd is off by default 252 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 253endif # !enable_target_debugging 254 255## eng ## 256 257ifeq ($(TARGET_BUILD_VARIANT),eng) 258tags_to_install := user debug eng 259 # Don't require the setup wizard on eng builds 260 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 261 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ 262 ro.setupwizard.mode=OPTIONAL 263endif 264 265## tests ## 266 267ifeq ($(TARGET_BUILD_VARIANT),tests) 268tags_to_install := user debug eng tests 269endif 270 271## sdk ## 272 273ifdef is_sdk_build 274ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 275$(error The 'sdk' target may not be specified with any other targets) 276endif 277 278# TODO: this should be eng I think. Since the sdk is built from the eng 279# variant. 280tags_to_install := user debug eng 281ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 282ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 283else # !sdk 284endif 285 286BUILD_WITHOUT_PV := true 287 288## precise GC ## 289 290ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 291 # Enabling type-precise GC results in larger optimized DEX files. The 292 # additional storage requirements for ".odex" files can cause /system 293 # to overflow on some devices, so this is configured separately for 294 # each product. 295 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 296endif 297 298# Install an apns-conf.xml file if one's not already being installed. 299ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 300 PRODUCT_COPY_FILES += \ 301 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 302 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 303 $(warning implicitly installing apns-conf_sdk.xml) 304 endif 305endif 306# If we're on an eng or tests build, but not on the sdk, and we have 307# a better one, use that instead. 308ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 309 ifndef is_sdk_build 310 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 311 ifneq ($(strip $(apns_to_use)),) 312 PRODUCT_COPY_FILES := \ 313 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 314 $(strip $(apns_to_use)):system/etc/apns-conf.xml 315 endif 316 endif 317endif 318 319ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 320 321# enable vm tracing in files for now to help track 322# the cause of ANRs in the content process 323ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 324 325# ------------------------------------------------------------ 326# Define a function that, given a list of module tags, returns 327# non-empty if that module should be installed in /system. 328 329# For most goals, anything not tagged with the "tests" tag should 330# be installed in /system. 331define should-install-to-system 332$(if $(filter tests,$(1)),,true) 333endef 334 335ifdef is_sdk_build 336# For the sdk goal, anything with the "samples" tag should be 337# installed in /data even if that module also has "eng"/"debug"/"user". 338define should-install-to-system 339$(if $(filter samples tests,$(1)),,true) 340endef 341endif 342 343 344# If they only used the modifier goals (showcommands, checkbuild), we'll actually 345# build the default target. 346ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) 347.PHONY: $(INTERNAL_MODIFIER_TARGETS) 348$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) 349endif 350 351# These targets are going to delete stuff, don't bother including 352# the whole directory tree if that's all we're going to do 353ifeq ($(MAKECMDGOALS),clean) 354dont_bother := true 355endif 356ifeq ($(MAKECMDGOALS),clobber) 357dont_bother := true 358endif 359ifeq ($(MAKECMDGOALS),dataclean) 360dont_bother := true 361endif 362ifeq ($(MAKECMDGOALS),installclean) 363dont_bother := true 364endif 365 366# Bring in all modules that need to be built. 367ifneq ($(dont_bother),true) 368 369ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 370SDK_ONLY := true 371$(info Building the SDK under darwin-ppc is actually obsolete and unsupported.) 372$(error stop) 373endif 374 375ifeq ($(HOST_OS),windows) 376SDK_ONLY := true 377endif 378 379ifeq ($(SDK_ONLY),true) 380 381# ----- SDK for Windows ------ 382# These configure the build targets that are available for the SDK under Windows. 383# The first section defines all the C/C++ tools that can be compiled in C/C++, 384# the second section defines all the Java ones (assuming javac is available.) 385 386subdirs := \ 387 prebuilt \ 388 build/libs/host \ 389 build/tools/zipalign \ 390 dalvik/dexdump \ 391 dalvik/libdex \ 392 dalvik/tools/dmtracedump \ 393 dalvik/tools/hprof-conv \ 394 development/host \ 395 development/tools/etc1tool \ 396 development/tools/line_endings \ 397 external/easymock \ 398 external/expat \ 399 external/libpng \ 400 external/qemu \ 401 external/sqlite/dist \ 402 external/zlib \ 403 frameworks/base \ 404 sdk/emulator/mksdcard \ 405 sdk/sdklauncher \ 406 system/core/adb \ 407 system/core/fastboot \ 408 system/core/libcutils \ 409 system/core/liblog \ 410 system/core/libzipfile 411 412# The following can only be built if "javac" is available. 413# This check is used when building parts of the SDK under Cygwin. 414ifneq (,$(shell which javac 2>/dev/null)) 415subdirs += \ 416 build/tools/signapk \ 417 dalvik/dx \ 418 libcore \ 419 sdk/archquery \ 420 sdk/androidprefs \ 421 sdk/apkbuilder \ 422 sdk/ddms \ 423 sdk/hierarchyviewer2 \ 424 sdk/jarutils \ 425 sdk/layoutlib_api \ 426 sdk/layoutlib_utils \ 427 sdk/layoutopt \ 428 sdk/ninepatch \ 429 sdk/sdkstats \ 430 sdk/sdkmanager \ 431 development/apps \ 432 development/tools/mkstubs \ 433 packages 434else 435$(warning SDK_ONLY: javac not available.) 436endif 437 438# Exclude tools/acp when cross-compiling windows under linux 439ifeq ($(findstring Linux,$(UNAME)),) 440subdirs += build/tools/acp 441endif 442 443else # !SDK_ONLY 444ifeq ($(BUILD_TINY_ANDROID), true) 445 446# TINY_ANDROID is a super-minimal build configuration, handy for board 447# bringup and very low level debugging 448 449subdirs := \ 450 bionic \ 451 system/core \ 452 build/libs \ 453 build/target \ 454 build/tools/acp \ 455 build/tools/apriori \ 456 build/tools/kcm \ 457 build/tools/soslim \ 458 external/elfcopy \ 459 external/elfutils \ 460 external/yaffs2 \ 461 external/zlib 462else # !BUILD_TINY_ANDROID 463 464# 465# Typical build; include any Android.mk files we can find. 466# 467subdirs := $(TOP) 468 469FULL_BUILD := true 470 471endif # !BUILD_TINY_ANDROID 472 473endif # !SDK_ONLY 474 475# Before we go and include all of the module makefiles, stash away 476# the PRODUCT_* values so that later we can verify they are not modified. 477stash_product_vars:=true 478ifeq ($(stash_product_vars),true) 479 $(call stash-product-vars, __STASHED) 480endif 481 482ifneq ($(ONE_SHOT_MAKEFILE),) 483# We've probably been invoked by the "mm" shell function 484# with a subdirectory's makefile. 485include $(ONE_SHOT_MAKEFILE) 486# Change CUSTOM_MODULES to include only modules that were 487# defined by this makefile; this will install all of those 488# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 489# so that the modules will be installed in the same place they 490# would have been with a normal make. 491CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) 492FULL_BUILD := 493# Stub out the notice targets, which probably aren't defined 494# when using ONE_SHOT_MAKEFILE. 495NOTICE-HOST-%: ; 496NOTICE-TARGET-%: ; 497 498else # ONE_SHOT_MAKEFILE 499 500# 501# Include all of the makefiles in the system 502# 503 504# Can't use first-makefiles-under here because 505# --mindepth=2 makes the prunes not work. 506subdir_makefiles := \ 507 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk) 508 509include $(subdir_makefiles) 510endif # ONE_SHOT_MAKEFILE 511 512ifeq ($(stash_product_vars),true) 513 $(call assert-product-vars, __STASHED) 514endif 515 516include $(BUILD_SYSTEM)/legacy_prebuilts.mk 517ifneq ($(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),) 518 $(warning *** Some files have been added to ALL_PREBUILT.) 519 $(warning *) 520 $(warning * ALL_PREBUILT is a depracated mechanism that) 521 $(warning * should not be used for new files.) 522 $(warning * As an alternative, use PRODUCT_COPY_FILES in) 523 $(warning * the appropriate product definition.) 524 $(warning * build/target/product/core.mk is the product) 525 $(warning * definition used in all products.) 526 $(warning *) 527 $(foreach bad_prebuilt,$(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),$(warning * unexpected $(bad_prebuilt) in ALL_PREBUILT)) 528 $(warning *) 529 $(error ALL_PREBUILT contains unexpected files) 530endif 531 532# ------------------------------------------------------------------- 533# All module makefiles have been included at this point. 534# ------------------------------------------------------------------- 535 536# ------------------------------------------------------------------- 537# Include any makefiles that must happen after the module makefiles 538# have been included. 539# TODO: have these files register themselves via a global var rather 540# than hard-coding the list here. 541ifdef FULL_BUILD 542 # Only include this during a full build, otherwise we can't be 543 # guaranteed that any policies were included. 544 -include frameworks/policies/base/PolicyConfig.mk 545endif 546 547# ------------------------------------------------------------------- 548# Fix up CUSTOM_MODULES to refer to installed files rather than 549# just bare module names. Leave unknown modules alone in case 550# they're actually full paths to a particular file. 551known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 552unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 553CUSTOM_MODULES := \ 554 $(call module-installed-files,$(known_custom_modules)) \ 555 $(unknown_custom_modules) 556 557# ------------------------------------------------------------------- 558# Define dependencies for modules that require other modules. 559# This can only happen now, after we've read in all module makefiles. 560# 561# TODO: deal with the fact that a bare module name isn't 562# unambiguous enough. Maybe declare short targets like 563# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 564# BUG: the system image won't know to depend on modules that are 565# brought in as requirements of other modules. 566define add-required-deps 567$(1): $(2) 568endef 569$(foreach m,$(ALL_MODULES), \ 570 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 571 $(if $(r), \ 572 $(eval r := $(call module-installed-files,$(r))) \ 573 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 574 ) \ 575 ) 576m := 577r := 578i := 579add-required-deps := 580 581# ------------------------------------------------------------------- 582# Figure out our module sets. 583 584# Of the modules defined by the component makefiles, 585# determine what we actually want to build. 586Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 587 $(CUSTOM_MODULES)) 588# TODO: Remove the 3 places in the tree that use 589# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 590 591ifdef FULL_BUILD 592 # The base list of modules to build for this product is specified 593 # by the appropriate product definition file, which was included 594 # by product_config.make. 595 user_PACKAGES := $(call module-installed-files, \ 596 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 597 ifeq (0,1) 598 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 599 $(foreach p,$(user_PACKAGES),$(info : $(p))) 600 $(error done) 601 endif 602else 603 # We're not doing a full build, and are probably only including 604 # a subset of the module makefiles. Don't try to build any modules 605 # requested by the product, because we probably won't have rules 606 # to build them. 607 user_PACKAGES := 608endif 609# Use tags to get the non-APPS user modules. Use the product 610# definition files to get the APPS user modules. 611user_MODULES := $(sort $(call get-tagged-modules,user shell_$(TARGET_SHELL))) 612user_MODULES := $(user_MODULES) $(user_PACKAGES) 613 614eng_MODULES := $(sort $(call get-tagged-modules,eng)) 615debug_MODULES := $(sort $(call get-tagged-modules,debug)) 616tests_MODULES := $(sort $(call get-tagged-modules,tests)) 617 618ifeq ($(strip $(tags_to_install)),) 619$(error ASSERTION FAILED: tags_to_install should not be empty) 620endif 621modules_to_install := $(sort $(Default_MODULES) \ 622 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 623 624# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 625# Filter out (do not install) any overridden packages. 626overridden_packages := $(call get-package-overrides,$(modules_to_install)) 627ifdef overridden_packages 628# old_modules_to_install := $(modules_to_install) 629 modules_to_install := \ 630 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 631 $(modules_to_install)) 632endif 633#$(error filtered out 634# $(filter-out $(modules_to_install),$(old_modules_to_install))) 635 636# Don't include any GNU targets in the SDK. It's ok (and necessary) 637# to build the host tools, but nothing that's going to be installed 638# on the target (including static libraries). 639ifdef is_sdk_build 640 target_gnu_MODULES := \ 641 $(filter \ 642 $(TARGET_OUT_INTERMEDIATES)/% \ 643 $(TARGET_OUT)/% \ 644 $(TARGET_OUT_DATA)/%, \ 645 $(sort $(call get-tagged-modules,gnu))) 646 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 647 modules_to_install := \ 648 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 649endif 650 651 652# build/core/Makefile contains extra stuff that we don't want to pollute this 653# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 654# contains everything that's built during the current make, but it also further 655# extends ALL_DEFAULT_INSTALLED_MODULES. 656ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 657include $(BUILD_SYSTEM)/Makefile 658modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 659ALL_DEFAULT_INSTALLED_MODULES := 660 661endif # dont_bother 662 663# These are additional goals that we build, in order to make sure that there 664# is as little code as possible in the tree that doesn't build. 665modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) 666 667# If you would like to build all goals, and not skip any intermediate 668# steps, you can pass the "all" modifier goal on the commandline. 669ifneq ($(filter all,$(MAKECMDGOALS)),) 670modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) 671endif 672 673# for easier debugging 674modules_to_check := $(sort $(modules_to_check)) 675#$(error modules_to_check $(modules_to_check)) 676 677# ------------------------------------------------------------------- 678# This is used to to get the ordering right, you can also use these, 679# but they're considered undocumented, so don't complain if their 680# behavior changes. 681.PHONY: prebuilt 682prebuilt: $(ALL_PREBUILT) 683 684# An internal target that depends on all copied headers 685# (see copy_headers.make). Other targets that need the 686# headers to be copied first can depend on this target. 687.PHONY: all_copied_headers 688all_copied_headers: ; 689 690$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 691 692# All the droid stuff, in directories 693.PHONY: files 694files: prebuilt \ 695 $(modules_to_install) \ 696 $(modules_to_check) \ 697 $(INSTALLED_ANDROID_INFO_TXT_TARGET) 698 699# ------------------------------------------------------------------- 700 701.PHONY: checkbuild 702checkbuild: $(modules_to_check) 703 704.PHONY: ramdisk 705ramdisk: $(INSTALLED_RAMDISK_TARGET) 706 707.PHONY: systemtarball 708systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 709 710.PHONY: boottarball 711boottarball: $(INSTALLED_BOOTTARBALL_TARGET) 712 713.PHONY: userdataimage 714userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 715 716.PHONY: userdatatarball 717userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 718 719.PHONY: bootimage 720bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 721 722ifeq ($(BUILD_TINY_ANDROID), true) 723INSTALLED_RECOVERYIMAGE_TARGET := 724endif 725 726# Build files and then package it into the rom formats 727.PHONY: droidcore 728droidcore: files \ 729 systemimage \ 730 $(INSTALLED_BOOTIMAGE_TARGET) \ 731 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 732 $(INSTALLED_USERDATAIMAGE_TARGET) \ 733 $(INSTALLED_FILES_FILE) 734 735# dist_libraries only for putting your library into the dist directory with a full build. 736.PHONY: dist_libraries 737 738ifeq ($(EMMA_INSTRUMENT),true) 739 $(call dist-for-goals, droid, $(EMMA_META_ZIP)) 740endif 741 742# Dist for droid if droid is among the cmd goals, or no cmd goal is given. 743ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),) 744 745ifneq ($(TARGET_BUILD_APPS),) 746 # If this build is just for apps, only build apps and not the full system by default. 747 748 unbundled_build_modules := 749 ifneq ($(filter all,$(TARGET_BUILD_APPS)),) 750 # If they used the magic goal "all" then build all apps in the source tree. 751 unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m))) 752 else 753 unbundled_build_modules := $(TARGET_BUILD_APPS) 754 endif 755 756 # dist the unbundled app. 757 $(call dist-for-goals,apps_only, \ 758 $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) \ 759 ) 760 761.PHONY: apps_only 762apps_only: $(unbundled_build_modules) 763 764droid: apps_only 765 766else # TARGET_BUILD_APPS 767 $(call dist-for-goals, droidcore, \ 768 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 769 $(INTERNAL_OTA_PACKAGE_TARGET) \ 770 $(SYMBOLS_ZIP) \ 771 $(APPS_ZIP) \ 772 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 773 $(PACKAGE_STATS_FILE) \ 774 $(INSTALLED_FILES_FILE) \ 775 $(INSTALLED_BUILD_PROP_TARGET) \ 776 $(BUILT_TARGET_FILES_PACKAGE) \ 777 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ 778 $(INSTALLED_RAMDISK_TARGET) \ 779 ) 780 781# Building a full system-- the default is to build droidcore 782droid: droidcore dist_libraries 783 784endif # TARGET_BUILD_APPS 785endif # droid in $(MAKECMDGOALS) 786 787 788.PHONY: droid tests 789tests: droidcore 790 791# phony target that include any targets in $(ALL_MODULES) 792.PHONY: all_modules 793all_modules: $(ALL_MODULES) 794 795.PHONY: docs 796docs: $(ALL_DOCS) 797 798.PHONY: sdk 799ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 800sdk: $(ALL_SDK_TARGETS) 801ifneq ($(filter sdk,$(MAKECMDGOALS)),) 802$(call dist-for-goals,sdk, \ 803 $(ALL_SDK_TARGETS) \ 804 $(SYMBOLS_ZIP) \ 805 ) 806endif 807 808.PHONY: samplecode 809sample_MODULES := $(sort $(call get-tagged-modules,samples)) 810sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples 811sample_APKS_COLLECTION := \ 812 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module))) 813$(foreach module,$(sample_MODULES),$(eval $(call \ 814 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module))))) 815sample_ADDITIONAL_INSTALLED := \ 816 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES)) 817samplecode: $(sample_APKS_COLLECTION) 818 @echo "Collect sample code apks: $^" 819 # remove apks that are not intended to be installed. 820 rm -f $(sample_ADDITIONAL_INSTALLED) 821 822.PHONY: findbugs 823findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 824 825.PHONY: clean 826clean: 827 @rm -rf $(OUT_DIR) 828 @echo "Entire build directory removed." 829 830.PHONY: clobber 831clobber: clean 832 833# The rules for dataclean and installclean are defined in cleanbuild.mk. 834 835#xxx scrape this from ALL_MODULE_NAME_TAGS 836.PHONY: modules 837modules: 838 @echo "Available sub-modules:" 839 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 840 tr -s ' ' '\n' | sort -u | $(COLUMN) 841 842.PHONY: showcommands 843showcommands: 844 @echo >/dev/null 845