main.mk revision 9058e7293e045b576b19101e41b65f67f8f6309b
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128is_sdk_build := 129ifneq ($(filter sdk,$(MAKECMDGOALS)),) 130is_sdk_build := true 131endif 132ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 133is_sdk_build := true 134endif 135 136 137## user/userdebug ## 138 139user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 140enable_target_debugging := true 141ifneq (,$(user_variant)) 142 # Target is secure in user builds. 143 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 144 145 tags_to_install := user 146 ifeq ($(user_variant),userdebug) 147 # Pick up some extra useful tools 148 tags_to_install += debug 149 else 150 # Disable debugging in plain user builds. 151 enable_target_debugging := 152 endif 153 154 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 155 # Also, remove the corresponding block in config/product_config.make. 156 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 157 WITH_DEXPREOPT := true 158 endif 159 160 # Disallow mock locations by default for user builds 161 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 162 163else # !user_variant 164 # Turn on checkjni for non-user builds. 165 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 166 # Set device insecure for non-user builds. 167 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 168 # Allow mock locations by default for non user builds 169 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 170endif # !user_variant 171 172ifeq (true,$(strip $(enable_target_debugging))) 173 # Target is more debuggable and adbd is on by default 174 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 175 # Include the debugging/testing OTA keys in this build. 176 INCLUDE_TEST_OTA_KEYS := true 177else # !enable_target_debugging 178 # Target is less debuggable and adbd is off by default 179 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 180endif # !enable_target_debugging 181 182## eng ## 183 184ifeq ($(TARGET_BUILD_VARIANT),eng) 185tags_to_install := user debug eng 186 # Don't require the setup wizard on eng builds 187 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 188 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 189endif 190 191## tests ## 192 193ifeq ($(TARGET_BUILD_VARIANT),tests) 194tags_to_install := user debug eng tests 195endif 196 197## sdk ## 198 199ifdef is_sdk_build 200ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 201$(error The 'sdk' target may not be specified with any other targets) 202endif 203# TODO: this should be eng I think. Since the sdk is built from the eng 204# variant. 205tags_to_install := user debug eng 206ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 207ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 208else # !sdk 209# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 210ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 211endif 212 213# Install an apns-conf.xml file if one's not already being installed. 214ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 215 PRODUCT_COPY_FILES += \ 216 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 217 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 218 $(warning implicitly installing apns-conf_sdk.xml) 219 endif 220endif 221# If we're on an eng or tests build, but not on the sdk, and we have 222# a better one, use that instead. 223ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 224 ifdef is_sdk_build 225 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 226 ifneq ($(strip $(apns_to_use)),) 227 PRODUCT_COPY_FILES := \ 228 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 229 $(strip $(apns_to_use)):system/etc/apns-conf.xml 230 endif 231 endif 232endif 233 234ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 235 236# enable vm tracing in files for now to help track 237# the cause of ANRs in the content process 238ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 239 240 241# ------------------------------------------------------------ 242# Define a function that, given a list of module tags, returns 243# non-empty if that module should be installed in /system. 244 245# For most goals, anything not tagged with the "tests" tag should 246# be installed in /system. 247define should-install-to-system 248$(if $(filter tests,$(1)),,true) 249endef 250 251ifdef is_sdk_build 252# For the sdk goal, anything with the "samples" tag should be 253# installed in /data even if that module also has "eng"/"debug"/"user". 254define should-install-to-system 255$(if $(filter samples tests,$(1)),,true) 256endef 257endif 258 259 260# If all they typed was make showcommands, we'll actually build 261# the default target. 262ifeq ($(MAKECMDGOALS),showcommands) 263.PHONY: showcommands 264showcommands: $(DEFAULT_GOAL) 265endif 266 267# These targets are going to delete stuff, don't bother including 268# the whole directory tree if that's all we're going to do 269ifeq ($(MAKECMDGOALS),clean) 270dont_bother := true 271endif 272ifeq ($(MAKECMDGOALS),clobber) 273dont_bother := true 274endif 275ifeq ($(MAKECMDGOALS),dataclean) 276dont_bother := true 277endif 278ifeq ($(MAKECMDGOALS),installclean) 279dont_bother := true 280endif 281 282# Bring in all modules that need to be built. 283ifneq ($(dont_bother),true) 284 285subdir_makefiles := 286 287ifeq ($(HOST_OS),windows) 288SDK_ONLY := true 289endif 290ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 291SDK_ONLY := true 292endif 293 294ifeq ($(SDK_ONLY),true) 295 296subdirs := \ 297 prebuilt \ 298 build/libs/host \ 299 dalvik/dexdump \ 300 dalvik/libdex \ 301 dalvik/tools/dmtracedump \ 302 dalvik/tools/hprof-conv \ 303 development/emulator/mksdcard \ 304 development/tools/line_endings \ 305 development/host \ 306 external/expat \ 307 external/libpng \ 308 external/qemu \ 309 external/sqlite/dist \ 310 external/zlib \ 311 frameworks/base/libs/utils \ 312 frameworks/base/tools/aapt \ 313 frameworks/base/tools/aidl \ 314 system/core/adb \ 315 system/core/fastboot \ 316 system/core/libcutils \ 317 system/core/liblog \ 318 system/core/libzipfile 319 320# The following can only be built if "javac" is available. 321# This check is used when building parts of the SDK under Cygwin. 322ifneq (,$(shell which javac 2>/dev/null)) 323$(warning sdk-only: javac available.) 324subdirs += \ 325 build/tools/signapk \ 326 build/tools/zipalign \ 327 dalvik/dx \ 328 dalvik/libcore \ 329 development/apps \ 330 development/tools/androidprefs \ 331 development/tools/apkbuilder \ 332 development/tools/jarutils \ 333 development/tools/layoutlib_utils \ 334 development/tools/ninepatch \ 335 development/tools/sdkstats \ 336 development/tools/sdkmanager \ 337 development/tools/mkstubs \ 338 frameworks/base \ 339 frameworks/base/tools/layoutlib \ 340 external/googleclient \ 341 packages 342else 343$(warning sdk-only: javac not available.) 344endif 345 346# Exclude tools/acp when cross-compiling windows under linux 347ifeq ($(findstring Linux,$(UNAME)),) 348subdirs += build/tools/acp 349endif 350 351else # !SDK_ONLY 352ifeq ($(BUILD_TINY_ANDROID), true) 353 354# TINY_ANDROID is a super-minimal build configuration, handy for board 355# bringup and very low level debugging 356 357INTERNAL_DEFAULT_DOCS_TARGETS := 358 359subdirs := \ 360 bionic \ 361 system/core \ 362 build/libs \ 363 build/target \ 364 build/tools/acp \ 365 build/tools/apriori \ 366 build/tools/kcm \ 367 build/tools/soslim \ 368 external/elfcopy \ 369 external/elfutils \ 370 external/yaffs2 \ 371 external/zlib 372else # !BUILD_TINY_ANDROID 373 374# 375# Typical build; include any Android.mk files we can find. 376# 377INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 378subdirs := $(TOP) 379 380FULL_BUILD := true 381 382endif # !BUILD_TINY_ANDROID 383 384endif # !SDK_ONLY 385 386# Can't use first-makefiles-under here because 387# --mindepth=2 makes the prunes not work. 388subdir_makefiles += \ 389 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 390 391# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 392# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 393# make sure only one exists. 394# Real boards should always be associated with an OEM vendor. 395board_config_mk := \ 396 $(strip $(wildcard \ 397 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 398 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 399 )) 400ifeq ($(board_config_mk),) 401 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 402endif 403ifneq ($(words $(board_config_mk)),1) 404 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 405endif 406include $(board_config_mk) 407TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 408board_config_mk := 409 410# Clean up/verify variables defined by the board config file. 411TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 412 413# 414# Include all of the makefiles in the system 415# 416 417ifneq ($(ONE_SHOT_MAKEFILE),) 418# We've probably been invoked by the "mm" shell function 419# with a subdirectory's makefile. 420include $(ONE_SHOT_MAKEFILE) 421# Change CUSTOM_MODULES to include only modules that were 422# defined by this makefile; this will install all of those 423# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 424# so that the modules will be installed in the same place they 425# would have been with a normal make. 426CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 427FULL_BUILD := 428INTERNAL_DEFAULT_DOCS_TARGETS := 429# Stub out the notice targets, which probably aren't defined 430# when using ONE_SHOT_MAKEFILE. 431NOTICE-HOST-%: ; 432NOTICE-TARGET-%: ; 433else 434include $(subdir_makefiles) 435endif 436# ------------------------------------------------------------------- 437# All module makefiles have been included at this point. 438# ------------------------------------------------------------------- 439 440# ------------------------------------------------------------------- 441# Include any makefiles that must happen after the module makefiles 442# have been included. 443# TODO: have these files register themselves via a global var rather 444# than hard-coding the list here. 445ifdef FULL_BUILD 446 # Only include this during a full build, otherwise we can't be 447 # guaranteed that any policies were included. 448 -include frameworks/policies/base/PolicyConfig.mk 449endif 450 451# ------------------------------------------------------------------- 452# Fix up CUSTOM_MODULES to refer to installed files rather than 453# just bare module names. Leave unknown modules alone in case 454# they're actually full paths to a particular file. 455known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 456unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 457CUSTOM_MODULES := \ 458 $(call module-installed-files,$(known_custom_modules)) \ 459 $(unknown_custom_modules) 460 461# ------------------------------------------------------------------- 462# Define dependencies for modules that require other modules. 463# This can only happen now, after we've read in all module makefiles. 464# 465# TODO: deal with the fact that a bare module name isn't 466# unambiguous enough. Maybe declare short targets like 467# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 468# BUG: the system image won't know to depend on modules that are 469# brought in as requirements of other modules. 470define add-required-deps 471$(1): $(2) 472endef 473$(foreach m,$(ALL_MODULES), \ 474 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 475 $(if $(r), \ 476 $(eval r := $(call module-installed-files,$(r))) \ 477 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 478 ) \ 479 ) 480m := 481r := 482add-required-deps := 483 484# ------------------------------------------------------------------- 485# Figure out our module sets. 486 487# Of the modules defined by the component makefiles, 488# determine what we actually want to build. 489# If a module has the "restricted" tag on it, it 490# poisons the rest of the tags and shouldn't appear 491# on any list. 492Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 493 $(ALL_BUILT_MODULES) \ 494 $(CUSTOM_MODULES)) 495# TODO: Remove the 3 places in the tree that use 496# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 497 498ifdef FULL_BUILD 499 # The base list of modules to build for this product is specified 500 # by the appropriate product definition file, which was included 501 # by product_config.make. 502 user_PACKAGES := $(call module-installed-files, \ 503 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 504 ifeq (0,1) 505 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 506 $(foreach p,$(user_PACKAGES),$(info : $(p))) 507 $(error done) 508 endif 509else 510 # We're not doing a full build, and are probably only including 511 # a subset of the module makefiles. Don't try to build any modules 512 # requested by the product, because we probably won't have rules 513 # to build them. 514 user_PACKAGES := 515endif 516# Use tags to get the non-APPS user modules. Use the product 517# definition files to get the APPS user modules. 518user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 519user_MODULES := $(user_MODULES) $(user_PACKAGES) 520 521eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 522debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 523tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 524 525ifeq ($(strip $(tags_to_install)),) 526$(error ASSERTION FAILED: tags_to_install should not be empty) 527endif 528modules_to_install := $(sort $(Default_MODULES) \ 529 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 530 531# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 532# Filter out (do not install) any overridden packages. 533overridden_packages := $(call get-package-overrides,$(modules_to_install)) 534ifdef overridden_packages 535# old_modules_to_install := $(modules_to_install) 536 modules_to_install := \ 537 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 538 $(modules_to_install)) 539endif 540#$(error filtered out 541# $(filter-out $(modules_to_install),$(old_modules_to_install))) 542 543# Don't include any GNU targets in the SDK. It's ok (and necessary) 544# to build the host tools, but nothing that's going to be installed 545# on the target (including static libraries). 546ifdef is_sdk_build 547 target_gnu_MODULES := \ 548 $(filter \ 549 $(TARGET_OUT_INTERMEDIATES)/% \ 550 $(TARGET_OUT)/% \ 551 $(TARGET_OUT_DATA)/%, \ 552 $(sort $(call get-tagged-modules,gnu))) 553 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 554 modules_to_install := \ 555 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 556endif 557 558 559# config/Makefile contains extra stuff that we don't want to pollute this 560# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 561# contains everything that's built during the current make, but it also further 562# extends ALL_DEFAULT_INSTALLED_MODULES. 563ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 564include $(BUILD_SYSTEM)/Makefile 565modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 566ALL_DEFAULT_INSTALLED_MODULES := 567 568endif # dont_bother 569 570# ------------------------------------------------------------------- 571# This is used to to get the ordering right, you can also use these, 572# but they're considered undocumented, so don't complain if their 573# behavior changes. 574.PHONY: prebuilt 575prebuilt: $(ALL_PREBUILT) 576 577# An internal target that depends on all copied headers 578# (see copy_headers.make). Other targets that need the 579# headers to be copied first can depend on this target. 580.PHONY: all_copied_headers 581all_copied_headers: ; 582 583$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 584 585# All the droid stuff, in directories 586.PHONY: files 587files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 588 589# ------------------------------------------------------------------- 590 591.PHONY: ramdisk 592ramdisk: $(INSTALLED_RAMDISK_TARGET) 593 594.PHONY: systemtarball 595systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 596 597.PHONY: userdataimage 598userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 599 600.PHONY: userdatatarball 601userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 602 603.PHONY: bootimage 604bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 605 606ifeq ($(BUILD_TINY_ANDROID), true) 607INSTALLED_RECOVERYIMAGE_TARGET := 608endif 609 610# Build files and then package it into the rom formats 611.PHONY: droidcore 612droidcore: files \ 613 systemimage \ 614 $(INSTALLED_BOOTIMAGE_TARGET) \ 615 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 616 $(INSTALLED_USERDATAIMAGE_TARGET) \ 617 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 618 $(INSTALLED_FILES_FILE) 619 620# The actual files built by the droidcore target changes depending 621# on the build variant. 622.PHONY: droid tests 623droid tests: droidcore 624 625$(call dist-for-goals, droid, \ 626 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 627 $(INTERNAL_OTA_PACKAGE_TARGET) \ 628 $(SYMBOLS_ZIP) \ 629 $(APPS_ZIP) \ 630 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 631 $(PACKAGE_STATS_FILE) \ 632 $(INSTALLED_FILES_FILE) \ 633 $(INSTALLED_BUILD_PROP_TARGET) \ 634 $(BUILT_TARGET_FILES_PACKAGE) \ 635 ) 636 637# Tests are installed in userdata.img. If we're building the tests 638# variant, copy it for "make tests dist". Also copy a zip of the 639# contents of userdata.img, so that people can easily extract a 640# single .apk. 641ifeq ($(TARGET_BUILD_VARIANT),tests) 642$(call dist-for-goals, droid, \ 643 $(INSTALLED_USERDATAIMAGE_TARGET) \ 644 $(BUILT_TESTS_ZIP_PACKAGE) \ 645 ) 646endif 647 648.PHONY: docs 649docs: $(ALL_DOCS) 650 651.PHONY: sdk 652ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 653sdk: $(ALL_SDK_TARGETS) 654$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 655 656.PHONY: findbugs 657findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 658 659.PHONY: clean 660dirs_to_clean := \ 661 $(PRODUCT_OUT) \ 662 $(TARGET_COMMON_OUT_ROOT) \ 663 $(HOST_OUT) \ 664 $(HOST_COMMON_OUT_ROOT) 665clean: 666 @for dir in $(dirs_to_clean) ; do \ 667 echo "Cleaning $$dir..."; \ 668 rm -rf $$dir; \ 669 done 670 @echo "Clean."; \ 671 672.PHONY: clobber 673clobber: 674 @rm -rf $(OUT_DIR) 675 @echo "Entire build directory removed." 676 677# The rules for dataclean and installclean are defined in cleanbuild.mk. 678 679#xxx scrape this from ALL_MODULE_NAME_TAGS 680.PHONY: modules 681modules: 682 @echo "Available sub-modules:" 683 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 684 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 685 686.PHONY: showcommands 687showcommands: 688 @echo >/dev/null 689 690