1/******************************************************************************
2 *
3 *  Copyright (C) 1999-2012 Broadcom Corporation
4 *
5 *  Licensed under the Apache License, Version 2.0 (the "License");
6 *  you may not use this file except in compliance with the License.
7 *  You may obtain a copy of the License at:
8 *
9 *  http://www.apache.org/licenses/LICENSE-2.0
10 *
11 *  Unless required by applicable law or agreed to in writing, software
12 *  distributed under the License is distributed on an "AS IS" BASIS,
13 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 *  See the License for the specific language governing permissions and
15 *  limitations under the License.
16 *
17 ******************************************************************************/
18#ifndef GKI_TARGET_H
19#define GKI_TARGET_H
20
21#ifdef BUILDCFG
22#include "buildcfg.h"
23#endif
24
25#include "data_types.h"
26
27/* Operating System Selection */
28#ifndef BTE_SIM_APP
29#define _GKI_ARM
30#define _GKI_STANDALONE
31#else
32#define _BT_WIN32
33#endif
34
35/* define prefix for exporting APIs from libraries */
36#define EXPORT_API
37
38#ifndef BTE_BSE_WRAPPER
39#ifdef  BTE_SIM_APP
40#undef  EXPORT_API
41#define EXPORT_API  __declspec(dllexport)
42#endif
43#endif
44
45#define GKI_API EXPORT_API
46#define UDRV_API EXPORT_API
47
48
49/******************************************************************************
50**
51** Task configuration
52**
53******************************************************************************/
54
55/* Definitions of task IDs for inter-task messaging */
56#ifndef MMI_TASK
57#define MMI_TASK                0
58#endif
59
60#ifndef HCISU_TASK
61#define HCISU_TASK              1
62#endif
63
64#ifndef NCIT_TASK
65#define NCIT_TASK                2
66#endif
67
68#ifndef NFC_TASK
69#define NFC_TASK                3
70#endif
71
72#ifndef BTU_TASK
73#define BTU_TASK                4
74#endif
75
76/* BTE Application, Sample Apps, or Serial port Demo based on JP3 and JP4 setting) */
77#ifndef BTE_APPL_TASK
78#define BTE_APPL_TASK           5
79#endif
80
81#ifndef DEV_MGR_TASK
82#define DEV_MGR_TASK            6
83#endif
84
85#ifndef ISE_SCR_TASK
86#define ISE_SCR_TASK            7
87#endif
88
89#ifndef UCODEC_TASK
90#define UCODEC_TASK             8
91#endif
92
93#ifndef RPCT_TASK
94#define RPCT_TASK               9
95#endif
96
97#ifndef UNV_TASK
98#define UNV_TASK                10
99#endif
100
101#ifndef BTE_IDLE_TASK
102#define BTE_IDLE_TASK           11
103#endif
104
105#ifndef UIPC_TASK
106#define UIPC_TASK               12
107#endif
108
109#ifndef HCISU_AMP_TASK
110#define HCISU_AMP_TASK          13
111#endif
112
113
114/* The number of GKI tasks in the software system. */
115#ifndef GKI_MAX_TASKS
116#define GKI_MAX_TASKS               14
117#endif
118
119/******************************************************************************
120**
121** Timer configuration
122**
123******************************************************************************/
124
125/* The number of GKI timers in the software system. */
126#ifndef GKI_NUM_TIMERS
127#define GKI_NUM_TIMERS              3
128#endif
129
130/* A conversion value for translating ticks to calculate GKI timer.  */
131#ifndef TICKS_PER_SEC
132#define TICKS_PER_SEC               100
133#endif
134
135/* delay in ticks before stopping system tick. */
136#ifndef GKI_DELAY_STOP_SYS_TICK
137#define GKI_DELAY_STOP_SYS_TICK     10
138#endif
139
140/******************************************************************************
141**
142** Buffer configuration
143**
144******************************************************************************/
145
146/* TRUE if GKI uses dynamic buffers. */
147#ifndef GKI_USE_DYNAMIC_BUFFERS
148#define GKI_USE_DYNAMIC_BUFFERS     FALSE
149#endif
150
151/* The size of the buffers in pool 0. */
152#ifndef GKI_BUF0_SIZE
153#define GKI_BUF0_SIZE               64
154#endif
155
156/* The number of buffers in buffer pool 0. */
157#ifndef GKI_BUF0_MAX
158#define GKI_BUF0_MAX                48
159#endif
160
161/* The ID of buffer pool 0. */
162#ifndef GKI_POOL_ID_0
163#define GKI_POOL_ID_0               0
164#endif
165
166/* The size of the buffers in pool 1. */
167#ifndef GKI_BUF1_SIZE
168#define GKI_BUF1_SIZE               128
169#endif
170
171/* The number of buffers in buffer pool 1. */
172#ifndef GKI_BUF1_MAX
173#define GKI_BUF1_MAX                26
174#endif
175
176/* The ID of buffer pool 1. */
177#ifndef GKI_POOL_ID_1
178#define GKI_POOL_ID_1               1
179#endif
180
181/* The size of the buffers in pool 2. */
182#ifndef GKI_BUF2_SIZE
183#define GKI_BUF2_SIZE               660
184#endif
185
186/* The number of buffers in buffer pool 2. */
187#ifndef GKI_BUF2_MAX
188#define GKI_BUF2_MAX                45
189#endif
190
191/* The ID of buffer pool 2. */
192#ifndef GKI_POOL_ID_2
193#define GKI_POOL_ID_2               2
194#endif
195
196/* The size of the buffers in pool 3. */
197#ifndef GKI_BUF3_SIZE
198#define GKI_BUF3_SIZE               2500
199#endif
200
201/* The number of buffers in buffer pool 3. */
202#ifndef GKI_BUF3_MAX
203#define GKI_BUF3_MAX                30
204#endif
205
206/* The ID of buffer pool 3. */
207#ifndef GKI_POOL_ID_3
208#define GKI_POOL_ID_3               3
209#endif
210
211/* The size of the largest PUBLIC fixed buffer in system. */
212#ifndef GKI_MAX_BUF_SIZE
213#define GKI_MAX_BUF_SIZE            GKI_BUF3_SIZE
214#endif
215
216/* The pool ID of the largest PUBLIC fixed buffer in system. */
217#ifndef GKI_MAX_BUF_SIZE_POOL_ID
218#define GKI_MAX_BUF_SIZE_POOL_ID    GKI_POOL_ID_3
219#endif
220
221/* RESERVED buffer pool for OBX */
222/* Ideally there should be 1 buffer for each instance for RX data, and some number
223of TX buffers based on active instances. OBX will only use these if packet size
224requires it. In most cases the large packets are used in only one direction so
225the other direction will use smaller buffers.
226Devices with small amount of RAM should limit the number of active obex objects.
227*/
228/* The size of the buffers in pool 4. */
229#ifndef GKI_BUF4_SIZE
230#define GKI_BUF4_SIZE               0x2000
231#endif
232
233/* The number of buffers in buffer pool 4. */
234#ifndef GKI_BUF4_MAX
235#define GKI_BUF4_MAX                (OBX_NUM_SERVERS + OBX_NUM_CLIENTS)
236#endif
237
238/* The ID of buffer pool 4. */
239#ifndef GKI_POOL_ID_4
240#define GKI_POOL_ID_4               4
241#endif
242
243/* The number of fixed GKI buffer pools.
244If L2CAP_FCR_INCLUDED is FALSE, Pool ID 5 is unnecessary
245If BTM_SCO_HCI_INCLUDED is FALSE, Pool ID 6 is unnecessary, otherwise set to 7
246If BTA_HL_INCLUDED is FALSE then Pool ID 7 is uncessary and set the following to 7, otherwise set to 8
247If GATT_SERVER_ENABLED is FALSE then Pool ID 8 is uncessary and set the following to 8, otherwise set to 9
248*/
249#ifndef GKI_NUM_FIXED_BUF_POOLS
250#define GKI_NUM_FIXED_BUF_POOLS     9
251#endif
252
253/* The buffer pool usage mask. */
254#ifndef GKI_DEF_BUFPOOL_PERM_MASK
255#define GKI_DEF_BUFPOOL_PERM_MASK   0xfff0
256#endif
257
258/* The number of fixed and dynamic buffer pools.
259If L2CAP_FCR_INCLUDED is FALSE, Pool ID 4 is unnecessary */
260#ifndef GKI_NUM_TOTAL_BUF_POOLS
261#define GKI_NUM_TOTAL_BUF_POOLS     10
262#endif
263
264/* The following is intended to be a reserved pool for L2CAP
265Flow control and retransmissions and intentionally kept out
266of order */
267
268/* The number of buffers in buffer pool 5. */
269#ifndef GKI_BUF5_MAX
270#define GKI_BUF5_MAX                64
271#endif
272
273/* The ID of buffer pool 5. */
274#ifndef GKI_POOL_ID_5
275#define GKI_POOL_ID_5               5
276#endif
277
278/* The size of the buffers in pool 5
279** Special pool used by l2cap retransmissions only.  This size based on segment
280** that will fit into both DH5 and 2-DH3 packet types after accounting for GKI
281** header.  13 bytes of max headers allows us a 339 payload max. (in btui_app.txt)
282** Note: 748 used for insight scriptwrapper with CAT-2 scripts.
283*/
284#ifndef GKI_BUF5_SIZE
285#define GKI_BUF5_SIZE               748
286#endif
287
288/* The buffer corruption check flag. */
289#ifndef GKI_ENABLE_BUF_CORRUPTION_CHECK
290#define GKI_ENABLE_BUF_CORRUPTION_CHECK TRUE
291#endif
292
293/* The GKI severe error macro. */
294#ifndef GKI_SEVERE
295#define GKI_SEVERE(code)
296#endif
297
298/* TRUE if GKI includes debug functionality. */
299#ifndef GKI_DEBUG
300#define GKI_DEBUG                   FALSE
301#endif
302
303/* Maximum number of exceptions logged. */
304#ifndef GKI_MAX_EXCEPTION
305#define GKI_MAX_EXCEPTION           8
306#endif
307
308/* Maximum number of chars stored for each exception message. */
309#ifndef GKI_MAX_EXCEPTION_MSGLEN
310#define GKI_MAX_EXCEPTION_MSGLEN    64
311#endif
312
313#ifndef GKI_SEND_MSG_FROM_ISR
314#define GKI_SEND_MSG_FROM_ISR    FALSE
315#endif
316
317
318/* The following is intended to be a reserved pool for SCO
319over HCI data and intentionally kept out of order */
320
321/* The ID of buffer pool 6. */
322#ifndef GKI_POOL_ID_6
323#define GKI_POOL_ID_6               6
324#endif
325
326/* The size of the buffers in pool 6,
327  BUF_SIZE = max SCO data 255 + sizeof(BT_HDR) = 8 + SCO packet header 3 + padding 2 = 268 */
328#ifndef GKI_BUF6_SIZE
329#define GKI_BUF6_SIZE               268
330#endif
331
332/* The number of buffers in buffer pool 6. */
333#ifndef GKI_BUF6_MAX
334#define GKI_BUF6_MAX                60
335#endif
336
337
338/* The following pool is a dedicated pool for HDP
339   If a shared pool is more desirable then
340   1. set BTA_HL_LRG_DATA_POOL_ID to the desired Gki Pool ID
341   2. make sure that the shared pool size is larger than 9472
342   3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
343      POOL ID 7 is not needed
344*/
345
346/* The ID of buffer pool 7. */
347#ifndef GKI_POOL_ID_7
348#define GKI_POOL_ID_7               7
349#endif
350
351/* The size of the buffers in pool 7 */
352#ifndef GKI_BUF7_SIZE
353#define GKI_BUF7_SIZE               9472
354#endif
355
356/* The number of buffers in buffer pool 7. */
357#ifndef GKI_BUF7_MAX
358#define GKI_BUF7_MAX                2
359#endif
360
361/* The following pool is a dedicated pool for GATT
362   If a shared pool is more desirable then
363   1. set GATT_DB_POOL_ID to the desired Gki Pool ID
364   2. make sure that the shared pool size fit a common GATT database needs
365   3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
366      POOL ID 8 is not needed
367*/
368
369/* The ID of buffer pool 8. */
370#ifndef GKI_POOL_ID_8
371#define GKI_POOL_ID_8               8
372#endif
373
374/* The size of the buffers in pool 8 */
375#ifndef GKI_BUF8_SIZE
376#define GKI_BUF8_SIZE               128
377#endif
378
379/* The number of buffers in buffer pool 8. */
380#ifndef GKI_BUF8_MAX
381#define GKI_BUF8_MAX                30
382#endif
383
384#if defined(GKI_DEBUG) && (GKI_DEBUG == TRUE)
385#ifdef LOG_TAG
386#undef LOG_TAG
387#endif
388#define LOG_TAG "GKI_LINUX"
389/* GKI Trace Macros */
390#define GKI_TRACE_0(m)                          LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m)
391#define GKI_TRACE_1(m,p1)                       LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1)
392#define GKI_TRACE_2(m,p1,p2)                    LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2)
393#define GKI_TRACE_3(m,p1,p2,p3)                 LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3)
394#define GKI_TRACE_4(m,p1,p2,p3,p4)              LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4)
395#define GKI_TRACE_5(m,p1,p2,p3,p4,p5)           LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4,p5)
396#define GKI_TRACE_6(m,p1,p2,p3,p4,p5,p6)        LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4,p5,p6)
397#else
398#define GKI_TRACE_0(m)
399#define GKI_TRACE_1(m,p1)
400#define GKI_TRACE_2(m,p1,p2)
401#define GKI_TRACE_3(m,p1,p2,p3)
402#define GKI_TRACE_4(m,p1,p2,p3,p4)
403#define GKI_TRACE_5(m,p1,p2,p3,p4,p5)
404#define GKI_TRACE_6(m,p1,p2,p3,p4,p5,p6)
405
406#endif
407
408#define GKI_TRACE_ERROR_0(m)                    LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m)
409#define GKI_TRACE_ERROR_1(m,p1)                 LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1)
410#define GKI_TRACE_ERROR_2(m,p1,p2)              LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2)
411#define GKI_TRACE_ERROR_3(m,p1,p2,p3)           LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3)
412#define GKI_TRACE_ERROR_4(m,p1,p2,p3,p4)        LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4)
413#define GKI_TRACE_ERROR_5(m,p1,p2,p3,p4,p5)     LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5)
414#define GKI_TRACE_ERROR_6(m,p1,p2,p3,p4,p5,p6)  LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5,p6)
415
416#ifdef __cplusplus
417extern "C"
418{
419#endif
420
421EXPORT_API extern void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...);
422
423#ifdef __cplusplus
424}
425#endif
426
427#endif  /* GKI_TARGET_H */
428