| 18a1444b4f1e6a0948fd38fa0de382d86cfe04de |
|
31-Dec-2013 |
Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org> |
Add files that would normally be generated by the e2fsprogs build system
Android doesn't run ./configure and friends, so it has to rely on
pre-populated versions of the autogenerated files.
This is somewhat bogus (e.g. hardcoded little-endian reference in
lib/ext2fs/ext2_types.h) and should at some point be fixed, but it's
what Android has always done, not a regression from the 1.41.14 branch.
Also, don't #include config.h which we don't generate (we pass what it
usually contains as -D parameters from Android.mk) anywhere.
Add a new Android.mk file for the quota library.
Change-Id: I162c6327fee5bd06261d9cdcc34bda10f04a6f21
Signed-off-by: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| d1154eb460efe588eaed3d439c1caaca149fa362 |
|
18-Sep-2011 |
Theodore Ts'o <tytso@mit.edu> |
Shorten compile commands run by the build system
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 543547a52a20cb7e69d74921b2f691078fd55d83 |
|
18-May-2010 |
Theodore Ts'o <tytso@mit.edu> |
libe2p, libext2fs: Update file copyright permission states to match COPYING
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| efc6f628e15de95bcd13e4f0ee223cb42115d520 |
|
28-Aug-2008 |
Theodore Ts'o <tytso@mit.edu> |
Remove trailing whitespace for the entire source tree
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 544349270e4c74a6feb971123884a8cf5052a7ee |
|
07-Dec-2003 |
Theodore Ts'o <tytso@mit.edu> |
Fix gcc -Wall nitpicks
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 48e6e81362f264aee4f3945c14928efaf71a06c9 |
|
06-Jul-2003 |
Theodore Ts'o <tytso@mit.edu> |
Fixx gcc -Wall nitpicks.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 9f8046fc6dfc13eee2f5c363214e60b533872cac |
|
14-May-2001 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
alloc.c, alloc_tables.c, badblocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c, dblist_dir.c,
dir_iterate.c, dirblock.c, dupfs.c, expanddir.c, ext2_fs.h, fileio.c,
finddev.c, flushb.c, freefs.c, get_pathname.c, getsize.c, icount.c,
imager.c, initialize.c, inline.c, inode.c, irel_ma.c, ismounted.c,
link.c, lookup.c, mkdir.c, mkjournal.c, namei.c, native.c, newdir.c,
nt_io.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c, tst_byteswap.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c, write_bb_file.c, ext2_fs.h: Moved file from include/linux.
Adjust all files in this directroy to include this file.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 31dbecd482405e0d3a67eb58e1a1c8cb9f2ad83e |
|
11-Jan-2001 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 674a4ee1e3e05133ddad701730bfc21c283272a4 |
|
23-Mar-1998 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
ext2fs.h: Add new superblock fields (s_algorithm_usage_bitmap,
s_prealloc_blocks, s_prealloc_dir_blocks). Added conditional defines
of new features COMPAT_DIR_PREALLOC, RO_COMPAT_LARGE_FILE
RO_COMPAT_BTREE_DIR, INCOMPAT_COMPRESSION, INCOMPAT_DIRNAME_SIZE.
Changed the library to declare that we support COMPAT_DIR_PREALLOC,
INCOMPAT_DIRNAME_SIZE, RO_COMPAT_LARGE_FILE.
fileio.c: Rename function ext2fs_file_llseek to be ext2fs_file_lseek,
which is more accurate.
block.c: Add new function ext2fs_block_iterate3 which calls the
iterator function with the blockcount argument of type blkcnt_t. This
version of the function is allowed to handle large files; the other
fucntions are not.
ext2fs.h: Add new type blkcnt_t
ext2_err.et.in: Add error code EXT2_ET_FILE_TOO_BIG
block.c (ext2fs_block_iterate2): Fix bug where the block count field
wasn't getting correctly incremented for sparse files when the
indirect or doubly-indirect block specified in the inode was zero.
unlink.c (unlink_proc):
lookup.c (lookup_proc):
link.c (link_proc):
get_pathname.c (get_pathname_proc):
dir_iterate.c (ext2fs_process_dir_block): Mask off high 8 bits from
dirent->name_len, so it can be used for other purposes.
ext2fs.h: Add definition of EXT2_FEATURE_INCOMPAT_DIRNAME_SIZE, and
indicate that we have support for this incompatible option.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| b5abe6fac9c9e7caf4710501d1657d30e4857ef6 |
|
19-Jan-1998 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 5be8dc2143c7b3b21a9b8fb56797dd855ee87560 |
|
01-Dec-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 1f0b6c1f895d189fea6999d0c07a7fee936a4baa |
|
31-Oct-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Rename new error codes to have _ET_ in them for consistency.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| c555aebde40afdc0d15d674f2c81c0e05cfded3f |
|
25-Oct-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 3cb6c5021d722e17b7105d1bc090880671f6fc6d |
|
11-Aug-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 4cbe8af4b0d0c72fb28bb500c1bd8a46b00fdde3 |
|
11-Aug-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
/external/e2fsprogs/lib/ext2fs/lookup.c
|
| 19c78dc07fce2d6f39b5e541562afc3ca1ea38ff |
|
29-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checked in e2fsprogs-1.07
/external/e2fsprogs/lib/ext2fs/lookup.c
|