51340f7b6a1103b12d86ef488f7140406d80401e |
|
15-Jul-2013 |
Florian Westphal <fw@strlen.de> |
extensions: libxt_connlabel: use libnetfilter_conntrack Pablo suggested to make it depend on lnf-conntrack, and get rid of the example config file as well. The problem is that the file must be in a fixed path, /etc/xtables/connlabel.conf, else userspace needs to "guess-the-right-file" when translating names to their bit values (and vice versa). Originally "make install" did put an example file into /etc/xtables/, but distributors complained about iptables ignoring the sysconfdir. So rather remove the example file, the man-page explains the format, and connlabels are inherently system-specific anyway. Signed-off-by: Florian Westphal <fw@strlen.de>
/external/iptables/Makefile.am
|
c5459339b0cae14b733fef0e52b3c9294deac65e |
|
10-Jun-2013 |
Phil Oester <kernel@linuxace.com> |
iptables: Fix connlabel.conf install location As reported by Danny Rawlins in bug #828, connlabel.conf is unconditionally installed in /etc/xtables instead of using prefix set at configure time. Fix to use sysconfdir variable. This closes bugzilla #828. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
0efff29d495f5bf234d06e4730f1abd78bdb8a1a |
|
15-May-2013 |
Florian Westphal <fw@strlen.de> |
Revert "extensions: add connlabel match" duplicate This reverts commit ca376fcbe51b9a102a490545957d5fee69e253e1 to get rid of the duplicated install-data-hook. This should get the tree back into the right state. Conflicts: Makefile.am
/external/iptables/Makefile.am
|
ccbf6b6448a4210432b76fd4660798705b05f8c4 |
|
06-May-2013 |
Florian Westphal <fw@strlen.de> |
extensions: add connlabel match allows to "tag" connections with up to 128 label names. Labels are defined in /etc/xtables/connlabel.conf, example: 0 from eth0 1 via eth0 Labels can then be attached to flows, e.g. -A PREROUTING -i eth0 -m connlabel --label "from eth0" --set Signed-off-by: Florian Westphal <fw@strlen.de>
/external/iptables/Makefile.am
|
ca376fcbe51b9a102a490545957d5fee69e253e1 |
|
06-May-2013 |
Florian Westphal <fw@strlen.de> |
extensions: add connlabel match allows to "tag" connections with up to 128 label names. Labels are defined in /etc/xtables/connlabel.conf, example: 0 from eth0 1 via eth0 Labels can then be attached to flows, e.g. -A PREROUTING -i eth0 -m connlabel --label "from eth0" --set Signed-off-by: Florian Westphal <fw@strlen.de>
/external/iptables/Makefile.am
|
1ac30c97c339957b6e3c5cf571de7bc38c827730 |
|
12-Mar-2013 |
Willem de Bruijn <willemb@google.com> |
utils: nfbpf_compile A BPF compiler to convert tcpdump expressions to the decimal format accepted by the libxt_bpf. Generate a file and pass that to iptables: nfbpf_compile RAW 'udp dst port 9000' > test.bpf iptables -A OUTPUT -m bpf --bytecode-file test.bpf -j LOG Or pass the output directly to iptables using backticks: iptables -A INPUT -m bpf --bytecode \ "`./nfbpf_compile RAW 'udp dst port 9000'" -j LOG This utility depends on libpcap. The library is only compiled if the option --enable-bpf-compiler is explicitly passed to ./configure and libpcap is found. Pablo has mangled the original patch to rename the utility to nfbpf_compile. Also modified the output to match exactly what -m bpf --bytecode needs. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
df60a301bf24c3b3e37188d9da155b97fd6dc076 |
|
31-Aug-2012 |
Jan Engelhardt <jengelh@inai.de> |
build: separate AC variable replacements from xtables.h It was/is a bit annoying that modifying xtables.h.in causes configure to rerun. Split the @foo@ things into a separate file to bypass this. Signed-off-by: Jan Engelhardt <jengelh@inai.de>
/external/iptables/Makefile.am
|
8816e91cddef785c78b3598c7c41a1f88be08f5a |
|
18-Sep-2011 |
Jan Engelhardt <jengelh@medozas.de> |
build: restore build order of modules iptables(exe) requires libext.a, but extensions/ require libxtables.la (in iptables/). This circular dependency does not work out, so separate libxtables into its own directory and put it in front. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
f56b8a8bf4b1041cb875fd8439778f35276bdb30 |
|
03-Sep-2011 |
Jan Engelhardt <jengelh@medozas.de> |
iptables: move kernel version find routing into libxtables That way, the remaining unreferenced symbols that do appear in libipt_DNAT and libipt_SNAT as part of the new check can be resolved, and the ugly -rdynamic hack can finally be removed. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
033e25a3ad215ee3f5a07f0a3315f74c4abfaced |
|
07-Jun-2011 |
Jan Engelhardt <jengelh@medozas.de> |
src: move all iptables pieces into a separate directory (Unclutter top-level dir) Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
5c8f5b60aa8e24da0bd25824f0f85bf7a4a39ea7 |
|
07-Jun-2011 |
Jan Engelhardt <jengelh@medozas.de> |
src: move all libiptc pieces into its directory Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
4598ed7d3e22d74ffaad7948ddc3455ac9aa7576 |
|
07-Jun-2011 |
Maciej Żenczykowski <zenczykowski@gmail.com> |
xtables-multi: fix absence of xml translator in IPv6-only builds Commit v1.4.11-4-gde791ff did not actually build the iptables-xml code into the xtables-multi binary. Signed-off-by: Maciej Zenczykowski <maze@google.com> Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
6918795519ddbf4d0efa9aa5b1b51cdafb99c55a |
|
03-Apr-2011 |
Mike Frysinger <vapier@gentoo.org> |
build: move remaining preprocessor flags to CPPFLAGS References; http://bugzilla.netfilter.org/show_bug.cgi?id=713 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
5085c3a037fa9327377dec7540d9c3ef2d53a58e |
|
01-Jun-2011 |
Jan Engelhardt <jengelh@medozas.de> |
build: move kinclude's preprocessor flags to kinclude_CPPFLAGS References: http://bugzilla.netfilter.org/show_bug.cgi?id=713 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
8e336251e155888f0ac2c79259f8792fc31920a1 |
|
01-Jun-2011 |
Jan Engelhardt <jengelh@medozas.de> |
build: move basic preprocessor flags to regular_CPPFLAGS This is where they belong, after all. References: http://bugzilla.netfilter.org/show_bug.cgi?id=713 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
a6793dbb87751a6a201c76ad75efb5d6b7f1e484 |
|
30-May-2011 |
Jan Engelhardt <jengelh@medozas.de> |
doc: iptables-xml should be in manpage section 1 References: http://bugs.debian.org/623112 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
de791ff2d7ac85fa0a707bbd6d98457bb18c5cbb |
|
30-May-2011 |
Jan Engelhardt <jengelh@medozas.de> |
build: fix absence of xml translator in IPv6-only builds Due to iptables-xml being listed under IPV4 only, its symlink was not created on `./configure --disable-ipv4 && make install`. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
71e402bbb3db7b54571f0e44354fd37706ff90aa |
|
30-May-2011 |
Jan Engelhardt <jengelh@medozas.de> |
build: fix installation of symlinks Commit v1.4.11~20 forgot to change the symlink target names to the new executable name. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
26ed9ea93564bb5ffdb5238eaa202cd9bcf6d6d1 |
|
05-Apr-2011 |
Maciej Żenczykowski <maze@google.com> |
combine ip6?tables-multi into xtables-multi Signed-off-by: Maciej Zenczykowski <maze@google.com>
/external/iptables/Makefile.am
|
9a9694fbf1796a6a5011b60b2a15c01fa3c61368 |
|
06-Apr-2011 |
Maciej Żenczykowski <maze@google.com> |
Move common parts of libext{4,6}.a into libext.a Signed-off-by: Maciej Zenczykowski <maze@google.com>
/external/iptables/Makefile.am
|
aa37acc1423126f555135935c687eb91995b9440 |
|
07-Feb-2011 |
Jan Engelhardt <jengelh@medozas.de> |
libxtables: guided option parser This patchset seeks to drastically reduce the code in the individual extensions by centralizing their argument parsing (breakdown of strings), validation, and in part, assignment. As a secondary goal, this reduces the number of static storage duration variables in flight. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
655ae6b096b7ba3854159dc1eefadce91ec65550 |
|
13-Sep-2010 |
Jan Engelhardt <jengelh@medozas.de> |
libiptc: build with -Wl,--no-as-needed Since libiptc does not reference any symbols in libip(4|6)tc, the linker may ignore the dependencies. Use --no-as-needed to explicitly force a DT_NEEDED entry. References: http://bugzilla.netfilter.org/show_bug.cgi?id=674 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
db6d027bb9626129617ea3a3f2fe4b87ab307bf6 |
|
27-Mar-2010 |
Jan Engelhardt <jengelh@medozas.de> |
libxt_osf: import nfnl_osf program xt_osf is pretty useless without the actual fingerprint loader. Import nfnl_osf-2009-06-07 and make it a part of the iptables distribution. Cc: Evgeniy Polyakov <johnpol@2ka.mxt.ru> Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
80fcb7b40823fed288e253c4a798eb4ee405102c |
|
25-Jul-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: build only iptables-multi I see no pressing reason to install all single programs when the multi binary can do the job. Within the build directory, developers can run the components by means of, for example, ./ip6tables-multi {main|restore|save} ... And when make install-ed, symlinks are available. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
b79ec69027fd8b65e7eccd78a445b6665e8ad53b |
|
23-Jul-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: combine iptables-multi and iptables-static Changed the Makefile so that: 1. --enable-shared / --disable-shared control the linkage against libdl (and thus the potential to use 3rd party extensions) 2. --enable-static / --disable-static controls whether shipped extensions are built-in or provided as modules iptables-static becomes redundant by this action; iptables-multi now has the feature. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
bb5c136dd49e04ce28b2479200f32ea8f92c1b70 |
|
23-Jul-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: order of dependent libs is sensitive libiptc.la must come after its components or `make install` won't get things right. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
f89c1716a7743ca6e2e6164d3b64c15b2e285e1e |
|
12-Jun-2009 |
Jan Engelhardt <jengelh@medozas.de> |
iptables: allow for help-less extensions This is for extensions that do not take any options, and which subsequently do not offer any help text either. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
cc4344042e8c0bb6eef877975588321aa152660d |
|
01-Jun-2009 |
Jan Engelhardt <jengelh@medozas.de> |
libiptc: split v4 and v6 The split can save some diskspace for constrained systems running which are only running one protocol. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
a094eb0f2a57592b6f3cf42fdbb9d49fead2d57c |
|
03-Apr-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: add configure option to disable ipv4 iptables This patch complements the previous one. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
8e58613df53f5f83e8ab92dec61d8065c68d967d |
|
03-Apr-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: add configure option to disable ip6tables This also skips building the IPv6 extensions. It does not #ifdef out all code however, I think that would make it too ugly. Inspired-by: http://bugzilla.netfilter.org/show_bug.cgi?id=560 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
c7f70f1b16ac9395bb13d1832b5c83b09594224f |
|
30-Mar-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: do not run ldconfig for DESTDIR installations Reference: http://bugzilla.netfilter.org/show_bug.cgi?id=560 Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
1288bf7e5c39af3ca690a12f419dde507c5a556d |
|
24-Mar-2009 |
Peter Volkov <pva@gentoo.org> |
build: fix linker issue when LDFLAGS contains --as-needed The link of iptables-save fails on: $ make LDFLAGS="-Wl,--as-needed" [...] extensions/libext4.a(libxt_RATEEST.o): In function `RATEEST_final_check': extensions/libxt_RATEEST.c:164: undefined reference to `log' Helpful Reference: http://www.gentoo.org/proj/en/qa/asneeded.xml Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
2c2466b0643393c1249d0650807a27f675969e6d |
|
17-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: trigger reconfigure when extensions/GNUmakefile.in changes Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
51bc836ad3fd52ed72289028871318d561b2959a |
|
11-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
libiptc: make library available as a shared library Tested-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
ae19604fe1c4ab02dfbcd450e73826111f0f2b27 |
|
12-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: remove unneeded -ldl from iptables_xml_LDADD Addendum to commit 5c3e0767764bb7fa1db61ac326e8359161380e21. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
f567ac9193bc421992e572ec3196a73dc6ed59c0 |
|
12-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: restructure Makefile for include/ directory This patch will support adding libiptc to the headers list in future. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
6f3c30059d9cf73c438db08998c58cd1b502eb44 |
|
12-Feb-2009 |
Patrick McHardy <kaber@trash.net> |
Merge branch 'master' of git://dev.medozas.de/iptables
|
4dcdc9b3f8f42eb3b5a1d12e1b3d2fc1e2675725 |
|
11-Feb-2009 |
Jamal Hadi Salim <hadi@cyberus.ca> |
libxtables: Make ip6tables, iptables and iptables-xml use xtables_globals convert ip6tables, iptables and iptables-xml to use xtables_globals/xtables_set_params() Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
c02e80878979d2205f3d89d05548397871e598e9 |
|
10-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
libxtables: decouple non-xtables parts from header Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
5c3e0767764bb7fa1db61ac326e8359161380e21 |
|
10-Feb-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: move -ldl to proper LDADD libxtables uses dlopen, so *it* has to use -ldl, not the main program. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
dacafa55379fd98212031d8c559096c91d7ce93b |
|
27-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
libxtables: prefix/order - program_name Split XTABLES_VERSION into xtables and iptables, and encode the xtables soversion into the extensions instead. This makes it possible to upgrade iptables without having to recompile 3rd-party extensions (if the libxtables version matches, of course). Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
630ef48037f3602333addfdb53789c9c6a4bb4c8 |
|
27-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
libxtables: prefix/order - fw_xalloc It is good practice to prefix names in a library some way so that it does not clash with external programs' variable names right on the first try. This change: rename fw_[cm]alloc to xtables_[cm]alloc and move the definition from internal.h to xtables.h to avoid potential compiler warnings. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
/external/iptables/Makefile.am
|
f92d6b05abd217c3e152caa2c494a138ccd5096e |
|
12-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: remove non-portable rule > Makefile.am:97: `%'-style pattern rules are a GNU make extension (iptables still requires GNU make for extensions/, because it is so much easier to write.) Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
52edda6cd97778721f76307c0f21bfc39b8533ac |
|
12-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: use regular = assignments in Makefile Resolves warnings: Makefile.am:7: `:='-style assignments are not portable Makefile.am:71: `:='-style assignments are not portable etc. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
8d67190c5501fd99a71908838ad6d36444234124 |
|
08-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
doc: put iptables version into manpage Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
0086b8bf9cf74642f6d6d82d9bbaedc80fec1dca |
|
07-Jan-2009 |
Jan Engelhardt <jengelh@medozas.de> |
build: resolve autotools suggestions libtool2 wants to put files into m4, so let it have it. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
75e8b13c4b3763dc95199b4a22f3d63b7b698119 |
|
08-Sep-2008 |
Jan Engelhardt <jengelh@medozas.de> |
build: run ldconfig on `make install` Reporeted-by: Brent Clark <brentgclarklist@gmail.com> Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
9e812285f071696c867adfb344dc0eb19af7136a |
|
01-Sep-2008 |
Jan Engelhardt <jengelh@medozas.de> |
build: prepare make tarball for git 1.6.0 Git 1.6.0 will not have the dashful forms anymore. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
74e8f2f64575e2e89ca92de9e468389b981c325c |
|
15-Aug-2008 |
Jan Engelhard <jengelh@medozas.de> |
build: fix iptables-static build Commit 126c1361ad5201973e6ebc761b3e38a67915de29 unfortunately broke building iptables-static due to listing iptables.c twice. Fix this. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
ee38146c2f87a4c80865b706edba1b3947b2f3ae |
|
13-Aug-2008 |
Jan Engelhardt <jengelh@medozas.de> |
build: fix dependency tracking for xtables.h.in For files to be correctly regenerated after the .in file has been touched, an explicit extra dependency is needed in the Makefile. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
126c1361ad5201973e6ebc761b3e38a67915de29 |
|
04-Aug-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Put xtables.c into its own library, libxtables.so iproute2's tc's m_ipt.c poses as a pseudo-iptables program to make use of the info structure composition of iptables extensions. Since tc would have to clone a lot of code, xtables.c is put into its own shared library and should not be relied upon by any other programs. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
415a8580cc2b053687c197e8e25d606e8420c672 |
|
04-Aug-2008 |
Jan Engelhardt <jengelh@medozas.de> |
src: drop libiptc from installation Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
/external/iptables/Makefile.am
|
72ed4ffedd4ea97faf1e405e90f512f881c59386 |
|
29-Jul-2008 |
Jan Engelhardt <jengelh@medozas.de> |
build: do not install ip{,6}tables.h These files do not contain anything that 3rd party modules could reasonably use. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/external/iptables/Makefile.am
|
e6610c8caf5dd4871fdd3db0b0e1026195f14c22 |
|
17-Apr-2008 |
Jan Engelhardt <jengelh@medozas.de> |
[PATCH 1] Makefile.am: use PACKAGE_TARNAME
/external/iptables/Makefile.am
|
ddcb288316c942a5b8de33edd5f03318db8906b7 |
|
15-Apr-2008 |
Jan Engelhardt <jengelh@medozas.de> |
[PATCH 11] configure.ac: remove already-defined variables
/external/iptables/Makefile.am
|
a7d9762f3190a9487f40334d6fd6ea3a59af50a1 |
|
11-Feb-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Install libiptc header files because xtables.h depends on it
/external/iptables/Makefile.am
|
ca7cd666949b68bf41a32de38ee38e332e89863b |
|
11-Feb-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Add all necessary header files - compilation fix for various cases Allow iptables to compile without a kernel source tree. This implies fixing build for older kernels, such as 2.6.17 which lack xt_SECMARK.h.
/external/iptables/Makefile.am
|
77f15384d768b1735a180d0c8e2b5934a94d02e4 |
|
11-Feb-2008 |
Jan Engelhardt <jengelh@medozas.de> |
configure: split --enable-libipq from --enable-devel
/external/iptables/Makefile.am
|
a31cdd88d7af44bc6c1e45b248ca3224363e1ba1 |
|
03-Mar-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Makefile: add a "tarball" target
/external/iptables/Makefile.am
|
fb6209a30fd576cd740eefe0a3ad88d65d2bb2b7 |
|
29-Jan-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Give preference to iptables header files Have the header files in the iptables source tree take precedence over those from the kernel source. Otherwise, building the current iptables from subversion just fails with kernels < 2.6.25. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
/external/iptables/Makefile.am
|
f82070f9871d281c2802c1624dcf222886b5fb50 |
|
20-Jan-2008 |
Jan Engelhardt <jengelh@medozas.de> |
Converts the iptables build infrastructure to autotools. - Can build both static and dynamic at the same time - iptables-static will be a multi-binary, semi-static (link against libc but w/o dynamic plugins) - Always build IPv6 modules - consider INSTALL Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
/external/iptables/Makefile.am
|