• Home
  • History
  • Annotate
  • only in /external/lldb/include/lldb/Target/
History log of /external/lldb/include/lldb/Target/
Revision Date Author Comments (<<< Hide modified files) (Show modified files >>>)
c590c679663f093bc74355572ccfa8d40284d065 07-Aug-2013 Daniel Malea <daniel.malea@intel.com> New settings: target.use-hex-immediates and target.hex-immediates-style
- Immediates can be shown as hex (either Intel or MASM style)
- See TestSettings.py for usage examples
- Verified to cause no regressions on Linux x86_64 (Ubuntu 12.10)

Patch by Richard Mitton!



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187921 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
e4923ddaa18bf003e339e6ab33bfd137a632fc0f 30-Jul-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/14526890>

Fixed a crasher when using memory threads where a thread is sticking around too long and was causing problems when it didn't have a thread plan.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187395 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
cf88b95d435873bd312e716da5701cf3882c5da4 29-Jul-2013 Ed Maste <emaste@freebsd.org> Use flag instead of rwlock state to track process running state

LLDB requires that the inferior process be stopped before, and remain
stopped during, certain accesses to process state.

Previously this was achieved with a POSIX rwlock which had a write lock
taken for the duration that the process was running, and released when
the process was stopped. Any access to process state was performed with
a read lock held.

However, POSIX requires that pthread_rwlock_unlock() be called from the
same thread as pthread_rwlock_wrlock(), and lldb needs to stop and start
the process from different threads. Violating this constraint is
technically undefined behaviour, although as it happens Linux and Darwin
result in the unlock proceeding in this case. FreeBSD follows POSIX
more strictly, and the unlock would fail, resulting in a hang later upon
the next attempt to take the lock.

All read lock consumers use ReadTryLock() and handle failure to obtain
the lock (typically by logging an error "process is running"). Thus,
instead of using the lock state itself to track the running state, this
change adds an explicit m_running flag. ReadTryLock tests the flag, and
if the process is not running it returns with the read lock held.

WriteLock and WriteTryLock are renamed to SetRunning and TrySetRunning,
and (if successful) they set m_running with the lock held. This way,
read consumers can determine if the process is running and act
appropriately, and write consumers are still held off from starting the
process if read consumers are active.

Note that with this change there are still some curious access patterns,
such as calling WriteUnlock / SetStopped twice in a row, and there's no
protection from multiple threads trying to simultaneously start the
process. In practice this does not seem to be a problem, and was
exposing other undefined POSIX behaviour prior to this change.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187377 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
6bea559652079732f2481054aace855a60e8c51d 26-Jul-2013 Jim Ingham <jingham@apple.com> Refine the fix in r187094 to only distrust the StackID comparision when we are starting from an address with no symbols.
If we don't do that "nexti" will stop too soon when stepping past a tail call jump.

rdar://problem/14516227


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187173 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInstruction.h
454916c0169502e4c8cf0f27ab61923f8b533dd0 25-Jul-2013 Jim Ingham <jingham@apple.com> Handle the case where we are stepping through code with no symbols, so we can't really find the function start PC
and so the StackID changes with every step. Do so by checking the parent frame ID, and if it hasn't changed,
then we haven't stepped in.

rdar://problem/14516227


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187094 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInstruction.h
008f3dc79c762b7d240b5ad6d4fb148c5cb039ca 18-Jul-2013 Jim Ingham <jingham@apple.com> This commit does two things. One, it converts the return value of the QueueThreadPlanXXX
plan providers from a "ThreadPlan *" to a "lldb::ThreadPlanSP". That was needed to fix
a bug where the ThreadPlanStepInRange wasn't checking with its sub-plans to make sure they
succeed before trying to proceed further. If the sub-plan failed and as a result didn't make
any progress, you could end up retrying the same failing algorithm in an infinite loop.

<rdar://problem/14043602>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186618 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanBase.h
hreadPlanShouldStopHere.h
hreadPlanStepInRange.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepThrough.h
hreadPlanStepUntil.h
801c11e786cd2c8185206ad4f1eced2b2afa3b77 16-Jul-2013 Ed Maste <emaste@freebsd.org> Remove unused RunLocker and related code

RunLocker was not used anywhere, and was the only instance of the
WriteLocker class. Remove both.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186361 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
52f792329be5db8e38961350589e97e8f2823acd 12-Jul-2013 Greg Clayton <gclayton@apple.com> Huge change to clean up types.

A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.

This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186130 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepOut.h
a807ceef5dad2b24e5bae5c5a193ff03aa7ec8d9 01-Jul-2013 Michael Sartain <mikesart@valvesoftware.com> Split symbol support for ELF and Linux.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185366 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
87f0261992eb2fac7a3dee5e100833972a19f22d 28-Jun-2013 Greg Clayton <gclayton@apple.com> PathMappingList doesn't need a virtual destructor.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185207 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
e46dd5bb968f0c269ead5cbf3d05511fd2ebcf92 27-Jun-2013 Sean Callanan <scallanan@apple.com> Remove the process's reservation cache and don't
bother checking if a region is safe to use. In
cases where regions need to be synthesized rather
than properly allocated, the memory reads required
to determine whether the area is used are

- insufficient, because intermediate locations
could be in use, and

- unsafe, because on some platforms reading from
memory can trigger events.

All this only makes a difference on platforms
where memory allocation in the target is impossible.
Behavior on platforms where it is possible should
stay the same.

<rdar://problem/14023970>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185046 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a1f156aa2695963058615edeabedfcb0f1ca5fab 24-Jun-2013 Han Ming Ong <hanming@apple.com> <rdar://problem/14182286>

Made sure that temporary object created from HarmonizeThreadIdsForProfileData() doesn’t get passed around without creating an object first.

Reviewed by Greg

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@184769 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
0bb91ef2b0f4d46b72c76076b8f7d99a7abb61f3 24-Jun-2013 Ed Maste <emaste@freebsd.org> Remove comment that is no longer applicable

Since r181446 the m_private_run_lock has been used for all platforms.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@184733 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
9e0d89ef07d6318728d2f76fc943cc7710014c7c 22-Jun-2013 Han Ming Ong <hanming@apple.com> <rdar://problem/14004410>

Remove old GetNextThreadIndexID() from lldb

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@184600 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
28ad12bffb738ef9243e399d04ffe190a127d21c 05-Jun-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13239809>

Two things:
1) fixing a bug where memory read was not clearing the m_force flag after it was passed, so that subsequent memory reads would not need to be forced even if over boundary
2) adding a setting target.max-memory-read-size that you can set instead of the hardcoded 1024 bytes limit we had before



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@183276 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
04cc48eb5cff32268a822b57f87590c9dc2643f8 04-Jun-2013 Jim Ingham <jingham@apple.com> If ThreadPlanCallFunction hasn't set its notion of the "real stop info" yet, just return the current PrivateStopInfo.

Also renamed a few more places where we were using StopReason in functions that were returning StopInfo's.

<rdar://problem/14042692>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@183177 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
hreadPlanCallFunction.h
d1ddde0c443e67b37f9303b5bdff19aad9f54fdc 24-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13643315>

Fixed performance issues that arose after changing SBTarget, SBProcess, SBThread and SBFrame over to using a std::shared_ptr to a ExecutionContextRef. The ExecutionContextRef doesn't store a std::weak_ptr to a stack frame because stack frames often get replaced with new version, so it held onto a StackID object that would allow us to ask the thread each time for the frame for the StackID. The linear function was too slow for large recursive stacks. We also fixed an issue where anytime the std::shared_ptr<ExecutionContextRef> in any SBTarget, SBProcess, SBThread objects was turned into an ExecutionContext object, it would try to resolve all items in the ExecutionContext which are shared pointers. Even if the StackID in the ExecutionContextRef was invalid, it was looking through all frames in every thread. This causes a lot of unnecessary frame accesses.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182627 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
07e3124bfa7b1b8d782689a625e13f95402c389a 21-May-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13878726>

Yet another implementation of the python in dSYM autoload :)
This time we are going with a ternary setting:
true - load, do not warn
false - do not load, do not warn
warn - do not load, warn (default)




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182414 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
4d4ff9e8f7746ba1b1d597512b7cb711350c0206 21-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13892516>

LLDB can now debug across calls to exec when the architecture changes from say i386 to x86_64 (on darwin).



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182345 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
02af494c397d62f22bea65d36ad47080b6adc8af 21-May-2013 Enrico Granata <egranata@apple.com> Improving the previous checkin about target.load-script-from-symbol-file

There are two settings:
target.load-script-from-symbol-file is a boolean that says load or no load (default: false)
target.warn-on-script-from-symbol-file is also a boolean, it says whether you want to be warned when a script file is not loaded due to security (default: true)

the auto loading on change for target.load-script-from-symbol-file is preserved



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182336 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
2e7f2db1b0c4c6d904811fba7d7877b19288c874 21-May-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13878726>

This changes the setting target.load-script-from-symbol-file to be a ternary enum value:
default (the default value) will NOT load the script files but will issue a warning suggesting workarounds
yes will load the script files
no will not load the script files AND will NOT issue any warning

if you change the setting value from default to yes, that will then cause the script files to be loaded
(the assumption is you didn't know about the setting, got a warning, and quickly want to remedy it)

if you have a settings set command for this in your lldbinit file, be sure to change "true" or "false" into an appropriate "yes" or "no" value



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182323 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
83d90c5e68f4a977150c6791a49ade7a23c92177 18-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/11398407>

Name matching was working inconsistently across many places in LLDB. Anyone doing name lookups where you want to look for all types of names should used "eFunctionNameTypeAuto" as the sole name type mask. This will ensure that we get consistent "lookup function by name" results. We had many function calls using as mask like "eFunctionNameTypeBase | eFunctionNameTypeFull | eFunctionNameTypeMethod | eFunctionNameTypeSelector". This was due to the function lookup by name evolving over time, but as it stands today, use eFunctionNameTypeAuto when you want general name lookups. Either ModuleList::FindFunctions() or Module::FindFunctions() will figure out the right kinds of names to lookup and remove the "eFunctionNameTypeAuto" and replace it with the exact subset of what the name can be.

This checkin also changes eFunctionNameTypeAny over to use eFunctionNameTypeAuto to reflect this.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182179 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
5acdec75cbdb5078de36d0bcf5b0c9bd97f46336 16-May-2013 Sean Callanan <scallanan@apple.com> Added a per-process cache for reserved memory
regions that aren't actually allocated in the
process. This cache is used by the expression
parser if the underlying process doesn't support
memory allocation, to avoid needless repeated
searches for unused address ranges.

Also fixed a silly bug in IRMemoryMap where it
would continue searching even after it found a
valid region.

<rdar://problem/13866629>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182028 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
375ba883a11c84b7eb27f6f04751aea878e3e9b0 14-May-2013 Daniel Malea <daniel.malea@intel.com> Fix inline stepping test case on Linux because Thread::ThreadStoppedForAReason ignored virtual steps.
- add IsVirtualStep() virtual function to ThreadPlan, and implement it for
ThreadPlanStepInRange
- make GetPrivateStopReason query the current thread plan for a virtual stop to
decide if the current stop reason needs to be preserved
- remove extra check for an existing process in GetPrivateStopReason



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181795 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanStepInRange.h
1d3db0a71f507df5158eb160aaceefb6dd5f38c2 13-May-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13183720>

Provide a mechanism through which users can disable loading the Python scripts from dSYM files
This relies on a target setting: target.load-script-from-symbol-file which defaults to false ("do NOT load the script")
You need to set it to true before creating your target (or in your lldbinit file if you constantly rely on this feature) to allow the scripts to load



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181709 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
ba065cab7acc8ef7fbedc27af5d18c3a694a084a 11-May-2013 Jason Molenda <jmolenda@apple.com> A couple of small fixes to make core file debugging less noisy.
Don't want about being unable to find a needed objective-c runtime
function when we're core file debugging and can't jit anything
anyway. Don't warn when quitting a debug session on a core file,
the program state can be reconstructed by re-running lldb on the
same core file again.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181653 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
addad59552c206466dea98c4a645a471a41252b4 11-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13700260>

Avoid a deadlock when using the OperatingSystemPython code and typing "process interrupt". There was a possible lock inversion between the target API lock and the process' thread list lock due to code trying to discard the thread list. This was fixed by adding a boolean to Process::Halt() that indicates if the thread plans should be discarded and doing it in the private state thread when we process the stopped state.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181651 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
0e191607adcb0ea8ebd06c278be648a7f5c0097f 10-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13854277>
<rdar://problem/13594769>

Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging

The plug-in interface changes:

Modified the lldb_private::PluginInterface class that all plug-ins inherit from:

Changed:

virtual const char * GetPluginName() = 0;

To:

virtual ConstString GetPluginName() = 0;

Removed:

virtual const char * GetShortPluginName() = 0;

- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.






git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181631 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
1f85fa8c8611a175819009dd83e724b6788a6587 10-May-2013 Andrew Kaylor <andrew.kaylor@intel.com> Adding support for setting thread stop state when a process stops.

This re-submission of this patch fixes a problem where the code sometimes caused a deadlock. The Process::SetPrivateState method was locking the Process::m_private_state variable and then later calling ThreadList::DidStop, which locks the ThreadList mutex. Other methods in ThreadList which were being called from other threads lock the ThreadList mutex and then call Process::GetPrivateState which locks the Process::m_private_state mutex. To avoid deadlocks, Process::SetPrivateState now locks the ThreadList mutex before locking the Process::m_private_state mutex.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181609 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadList.h
85e3c2f2f7e60a772f9fffa3fc42d46e493d198c 09-May-2013 Daniel Malea <daniel.malea@intel.com> Revert r181482 as it causes occasional hangs in LLDB buildbots

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181526 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadList.h
863aa28adf536c9c008e1590f25da662431d6f13 09-May-2013 Greg Clayton <gclayton@apple.com> Changed the formerly pure virtual function:

namespace lldb_private {
class Thread
{
virtual lldb::StopInfoSP
GetPrivateStopReason() = 0;
};
}

To not be virtual. The lldb_private::Thread now handles the correct caching and will call a new pure virtual function:

namespace lldb_private {
class Thread
{
virtual bool
CalculateStopInfo() = 0;
}
}

This function must be overridden by thead lldb_private::Thread subclass and the only thing it needs to do is to set the Thread::StopInfo() with the current stop reason and return true, or return false if there is no stop reason. The lldb_private::Thread class will take care of calling this function only when it is required. This allows lldb_private::Thread subclasses to be a bit simpler and not all need to duplicate the cache and invalidation settings.

Also renamed:

lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopReason();

To:

lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopInfo();

Also cleaned up a case where the ThreadPlanStepOverBreakpoint might not re-set its breakpoint if the thread disappears (which was happening due to a bug when using the OperatingSystem plug-ins with memory threads and real threads).



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181501 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanStepOverBreakpoint.h
52e4391bf4239f770f856392869f652f5417f489 09-May-2013 Andrew Kaylor <andrew.kaylor@intel.com> Adding code to set thread state to stopped when the process stops.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181482 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadList.h
c5bcb907e4a898783640c038b84c9f2ac10ee91d 08-May-2013 Daniel Malea <daniel.malea@intel.com> Remove distinction between Apple/Linux for Process run locks:
- Played with the current dual run lock implementation for a few days, noticed
no regressions, so enabling in trunk so we see if any problems are detected
by buildbots.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181446 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
7c79a27b955432dfd3ad9439640f0af2eccf37b8 08-May-2013 Jim Ingham <jingham@apple.com> Figure out the reply to "PlanExplainsStop" once when we stop and then use the cached
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.

Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.

Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--

M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181381 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
hread.h
hreadList.h
hreadPlan.h
hreadPlanBase.h
hreadPlanCallFunction.h
hreadPlanRunToAddress.h
hreadPlanStepInRange.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepOverBreakpoint.h
hreadPlanStepOverRange.h
hreadPlanStepThrough.h
hreadPlanStepUntil.h
4e75e3533bddc7cf7264c6c7f7b4d812d4466e96 07-May-2013 Andrew Kaylor <andrew.kaylor@intel.com> Reinstating r181091 and r181106 with fix for Linux regressions.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181340 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
rocess.h
hreadList.h
95bea1dfb166a1816ee36a3453aa3ebeca248844 07-May-2013 Ashok Thirumurthi <ashok.thirumurthi@intel.com> Temporarily reverting r181091 and r181106 due to the vast test breakage on the Linux buildbots
while we develop a better understanding of how to manage the thread lists in a platform-independant fashion.

Reviewed by: Daniel Malea


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181323 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
rocess.h
hreadList.h
7bee8abf1678cb4dade06add9036981f7249ba09 04-May-2013 Greg Clayton <gclayton@apple.com> After recent OperatingsSystem plug-in changes, the lldb_private::Process and lldb_private::Thread subclasses were changed and the API was not respected properly.

This checkin aims to fix this. The process now has two thread lists: a real thread list for threads that are created by the lldb_private::Process subclass, and the user visible threads. The user visible threads are the same as the real threas when no OS plug-in in used. But when an OS plug-in is used, the user thread can be a combination of real and "memory" threads. Real threads can be placed inside of memory threads so that a thread appears to be different, but is still controlled by the actual real thread. When the thread list needs updating, the lldb_private::Process class will call the: lldb_private::Process::UpdateThreadList() function with the old real thread list, and the function is expected to fill in the new real thread list with the current state of the process. After this function, the process will check if there is an OS plug-in being used, and if so, it will give the old user thread list, the new real thread list and the OS plug-in will create the new user thread list from both of these lists. If there is no OS plug-in, the real thread list is the user thread list.

These changes keep the lldb_private::Process subclasses clean and no changes are required.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181091 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
rocess.h
hreadList.h
08f60c88b61c42c35abf3233f0cbe19d29fbe814 04-May-2013 Jason Molenda <jmolenda@apple.com> fix a couple of clang static analyzer warnings.
Most important was a new[] + delete mismatch in ScanFormatDescriptor()
and a couple of possible memory leaks in FileSpec::EnumerateDirectory().


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181080 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ff1bbd78581ab2f1e43fbbc8b6e2dc23a9745967 03-May-2013 Andrew Kaylor <andrew.kaylor@intel.com> Fix logic error in ProcessInfo::SetArg0

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181049 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
761afb822b18c46b2ad84be03f372e90ac1e6143 02-May-2013 Jim Ingham <jingham@apple.com> Recommitting r180831 with trivial fix - remember to return errors if you compute.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180898 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a46013bde54626b68cd2013b108f73a205f4b29a 01-May-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13700260>
<rdar://problem/13723772>

Modified the lldb_private::Thread to work much better with the OperatingSystem plug-ins. Operating system plug-ins can now return have a "core" key/value pair in each thread dictionary for the OperatingSystemPython plug-ins which allows the core threads to be contained with memory threads. It also allows these memory threads to be stepped, resumed, and controlled just as if they were the actual backing threads themselves.

A few things are introduced:
- lldb_private::Thread now has a GetProtocolID() method which returns the thread protocol ID for a given thread. The protocol ID (Thread::GetProtocolID()) is usually the same as the thread id (Thread::GetID()), but it can differ when a memory thread has its own id, but is backed by an actual API thread.
- Cleaned up the Thread::WillResume() code to do the mandatory parts in Thread::ShouldResume(), and let the thread subclasses override the Thread::WillResume() which is now just a notification.
- Cleaned up ClearStackFrames() implementations so that fewer thread subclasses needed to override them
- Changed the POSIXThread class a bit since it overrode Thread::WillResume(). It is doing the wrong thing by calling "Thread::SetResumeState()" on its own, this shouldn't be done by thread subclasses, but the current code might rely on it so I left it in with a TODO comment with an explanation.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180886 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
egisterContext.h
topInfo.h
hread.h
hreadList.h
0b78f4317b4fae90ca45bcf1fe6d8adfc8125990 01-May-2013 Daniel Malea <daniel.malea@intel.com> Revert 180829 as it causes hangs in TestTypeCompletion.py on 2 Linux buildbots:

http://lab.llvm.org:8011/builders/lldb-x86_64-linux/builds/3810
http://lab.llvm.org:8011/builders/lldb-x86_64-debian-clang/builds/2754



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180870 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanBase.h
411ab47806a478d932926ef7a309ea37edf1f7e7 01-May-2013 Daniel Malea <daniel.malea@intel.com> Reverting 180831 as it crashes TestDefaultConstructorForAPIObjects.py



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180868 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b4e08abf4972befc8412bc83a0205fbdc547290e 01-May-2013 Jim Ingham <jingham@apple.com> Added an option to "process detach" to keep the process stopped, if the process plugin (or in the
case of ProcessGDBRemote the stub we are talking to) know how to do that.

rdar://problem/13680832


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180831 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
8b73c976083265c4085c57ded28f70629ab8d5f8 01-May-2013 Jim Ingham <jingham@apple.com> Make "process handle -n true -s false" actually notifies of the signal.

rdar://problem/12020085


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180829 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanBase.h
8a1e6542c5b125613ffce3039aa713ee6ea07dcf 30-Apr-2013 Greg Clayton <gclayton@apple.com> lldb_private::StopInfo now holds onto a ThreadWP (a std::weak_ptr<lldb_private::Thread>) in case the thread goes away while the stop info still exists.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180749 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
d9661be3c9f884d9a7a78174038387edd04c5d93 24-Apr-2013 Enrico Granata <egranata@apple.com> Changes to the ObjC runtime



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180199 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
5042acfb254338f60ef8bc3a8715e229795d941f 20-Apr-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13697881>

Fixed the GDB remote with the python OS plug-in to not show core threads when they aren't desired and also to have the threads "to the right thing" when continuing.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179912 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
d387b462eecb908af265ecc7006781b4532073ad 19-Apr-2013 Greg Clayton <gclayton@apple.com> Fixed some linux buildbot warnings.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179892 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
347d722127cc6a19b077244305c3d350ea4ef80e 19-Apr-2013 Ashok Thirumurthi <ashok.thirumurthi@intel.com> Provided a variant of ReadCStringFromMemory that supports null terminators of any character width.
This prevents unbounded reads (i.e. reads of GetMaximumSizeOfStringSummary() bytes)
from causing test failures (i.e. due to ptrace EIO or EFAULT on Linux).

Note that ReadCStringFromMemory is marked as deprecated because the loop that calls
ReadMemory does not continue until the string has been completely read.
The expected behavior is to read until until max_bytes or a null terminator.

Note: As discussed on lldb-dev, further testing will be performed with ReadStringFromMemory
before further changes are made for users of ReadCStringFromMemory.

Thanks to Enrico, Matt and Andy for their review feedback.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179857 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
102b2c2681c9a830afe25bfea35557421905e42c 19-Apr-2013 Greg Clayton <gclayton@apple.com> After discussing with Chris Lattner, we require C++11, so lets get rid of the macros and just use C++11.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179805 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
bjCLanguageRuntime.h
rocess.h
egisterContext.h
tackFrame.h
tackFrameList.h
arget.h
hread.h
hreadPlanStepInRange.h
81a96aa6242f7b559770f5dc62316253cb8cb0d4 18-Apr-2013 Greg Clayton <gclayton@apple.com> Since we use C++11, we should switch over to using std::unique_ptr when C++11 is being used. To do this, we follow what we have done for shared pointers and we define a STD_UNIQUE_PTR macro that can be used and it will "do the right thing". Due to some API differences in std::unique_ptr and due to the fact that we need to be able to compile without C++11, we can't use move semantics so some code needed to change so that it can compile with either C++.

Anyone wanting to use a unique_ptr or auto_ptr should now use the "STD_UNIQUE_PTR(TYPE)" macro.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179779 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
tackFrameList.h
arget.h
hread.h
hreadPlanStepInRange.h
061ca65c4b666f8352ba08700ca4e5fa71ebb4a9 18-Apr-2013 Greg Clayton <gclayton@apple.com> Re-enable m_private_run_lock changes from 179329, but only for Apple hosted builds so it doesn't break the buildbots. We will try and work the issues out in the Apple build before enabling this feature for everyone.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179772 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
6b47bca0e0472439b9c69fb16b9c6a3bcfbe783b 18-Apr-2013 Ashok Thirumurthi <ashok.thirumurthi@intel.com> Revert of r179378 and r179329, which introduce a private thread lock around thread enumeration,
in order to prevent consistent hangs on all 3 LLDB buildbots.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179759 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
81f4b8953db5db67bec754dc895a5a83c96c84fb 18-Apr-2013 Andy Gibbs <andyg1001@hotmail.co.uk> Remove duplicate "friend" declaration.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179749 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
9acf3699d2bea583b45c762f4cd82b2a4af6131b 12-Apr-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13491977>

Made some fixes to the OperatingSystemPython class:
- If any thread dictionary contains any "core=N" key/value pairs then the threads obtained from the lldb_private::Process itself will be placed inside the ThreadMemory threads and will be used to get the information for a thread.
- Cleaned up all the places where a thread inside a thread was causing problems



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179405 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
0e7cff415ada6e6dc45b32b51516bca39eb69e38 12-Apr-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13370286>

Fixed a case there the OperatingSystemPython would try to access and play with SBValue objects when the process' public run lock was taken. Prior to this fix, all attempts to run any SBValue functions would fail if run from the private state thread (like updating the thread list). Now we have two run locks, one for public (all threads except the private state thread) and one for private.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@179329 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
12fbcf5bdbc54e49bf565ec067b3b484c28a52fe 05-Apr-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13563628>

Introducing a negative cache for ObjCLanguageRuntime::LookupInCompleteClassCache()
This helps speed up the (common) case of us looking for classes that are hidden deep within Cocoa internals and repeatedly failing at finding type information for them.
In order for this to work, we need to clean this cache whenever debug information is added. A new symbols loaded event is added that is triggered with add-dsym (before modules loaded would be triggered for both adding modules and adding symbols).
Interested parties can register for this event. Internally, we make sure to clean the negative cache whenever symbols are added.
Lastly, ClassDescriptor::IsTagged() has been refactored to GetTaggedPointerInfo() that also (optionally) returns info and value bits. In this way, data formatters can share tagged pointer code instead of duplicating the required arithmetic.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178897 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
arget.h
c1238839e67d2b4ee6abfc8972588cae2d8e265b 05-Apr-2013 Jason Molenda <jmolenda@apple.com> Ah, forgot to include the header file and project file changes in r178827.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178830 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
296b06d325413723f5aac5988eed977b278a7807 03-Apr-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13506727>

Symbol table function names should support lookups like symbols with debug info.

To fix this I:
- Gutted the way FindFunctions is used, there used to be way too much smarts only in the DWARF plug-in
- Made it more efficient by chopping the name up once and using simpler queries so that SymbolFile and Symtab plug-ins don't need to do as much
- Filter the results at a higher level
- Make the lldb_private::Symtab able to chop up C++ mangled names and make as much sense out of them as possible and also be able to search by basename, fullname, method name, and selector name.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178608 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
e33bb5b0dabf62498715afe3d1cd22cda0af1d24 29-Mar-2013 Jim Ingham <jingham@apple.com> Rationalize how we do Halt-ing before Destroy and Detach.

<rdar://problem/13527167>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178325 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
226484d8533b19c9a63e5df20d30c37075e51f03 28-Mar-2013 Greg Clayton <gclayton@apple.com> Be sure to take the mutex when the destructor is called in case other threads are using these lists and those other threads have the mutex locked.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178262 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
23ed3ad96930e0b4d587bd429dca99f1f5f8bd16 28-Mar-2013 Jim Ingham <jingham@apple.com> The other half of the checkin to produce better error messages when the ThreadPlanCallFunction isn't valid.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178203 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
3dc2a5b732ae161b8ae51d376a8f0060a7d9e2a8 20-Mar-2013 Enrico Granata <egranata@apple.com> Cleanup to the ObjC runtime to remove the now useless ClassDescriptor_Invalid

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@177558 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
535f53c8795b3592ce835804af5cef89be39ceea 19-Mar-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13443931>

Fixed a crasher in the SourceManager where it wasn't checking the m_target member variable for NULL.

In doing this fix, I hardened this class to have weak pointers to the debugger and target in case they do go away. I also changed SBSourceManager to hold onto weak pointers to the debugger and target so they don't keep objects alive by holding a strong reference to them.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@177365 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
1e911a03121ab57f16b017be7d8bcf580a999e29 16-Mar-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13194155>

Variables view out of sync with lldb in Xcode is now fixed. Depending on what happened stack frames could get out of date and a stale shared pointer (one that is no longer a current frame in a thread) could end up being used.

Now we don't store a weak_ptr to a frame in the ExecutionContextRef class, we just store its stack ID and we always regrab the frame from the thread by stack ID.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@177208 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
a01b0fa183a5bd0110722bf17401882b1672635f 14-Mar-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/12537646>

lldb remembers not-found source file, setting target.source-map doesn't make it re-check for it. Now this is fixed. Each time the source path remappings get updated, the modification ID in the PathMappingList gets bumped and then we know the re-check for sources.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@177125 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
5e0e372e8b95767b0467f31f8d5ce0d394f50ded 13-Mar-2013 Jim Ingham <jingham@apple.com> Add a target setting (target.use-fast-stepping) to control using the "run to next branch" stepping algorithm.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176958 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
3aaa2c2d1ff6e944d02f3692525c25058b41db21 13-Mar-2013 Jim Ingham <jingham@apple.com> The step by running from branch to branch pretty much works with this checkin (at least for x86_64) but is still
turned off, it needs more qualification. If you want to play with it, change the initialization of m_use_fast_step
to true.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176923 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepRange.h
d5dc67a10267a7b7e856fb67652e70e6c5ead8be 13-Mar-2013 Jim Ingham <jingham@apple.com> More cleanup, remove an untrue comment.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176921 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
19784bd12a0beae5b7930d51dcd9ded53cb08470 11-Mar-2013 Greg Clayton <gclayton@apple.com> Buildbot was failing to build. I guess classes declared in implementation files are treated differently on various compilers causing a "friend class Foo;" to fail for forward declared classes in global namespace.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176823 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
d96df0a55f0a6e19af3d61d3f7ab5103ff96c543 11-Mar-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13372857>

Fixed the exception breakpoints to always use a file filter to make setting exception breakpoint efficient.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176821 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
7d4083837c5a258375fdc185d464b4ed15759a4b 02-Mar-2013 Jim Ingham <jingham@apple.com> Convert from the C-based LLVM Disassembler shim to the full MC Disassembler API's.
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the disassembly flavor for x86 based architectures to intel or att.

<rdar://problem/11319574>
<rdar://problem/9329275>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176392 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
eb17530206e3f501476a32c5d28c8dc36bac419a 01-Mar-2013 Jim Ingham <jingham@apple.com> Move m_destroy_in_process to Process (from ProcessKDP) since it is generally useful,
and use it to keep from doing the OS Plugin UpdateThreadList while destroying, since
if that does anything that requires the API lock it may deadlock against whoever is
running the Process::Destroy.

<rdar://problem/13308627>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176375 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4f9103faba72fdfc4b4299d6d459bc820ee597b2 27-Feb-2013 Matt Kopec <Matt.Kopec@intel.com> Add GNU indirect function support in expressions for Linux.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176206 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hreadPlanCallFunction.h
efb4aeba2bd8411ac0aee9934f08959094d50711 15-Feb-2013 Jim Ingham <jingham@apple.com> A little cleanup. {Disable/Enable}Breakpoint actually disables/enables BreakpointSites not breakpoints, it is confusing
to have it not named appropriately. Also in StopInfoMachException, we aren't testing for software or not software, just
whether the thing is a breakpoint we set. So don't use "software"...


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@175241 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ce490e3161b17c3f2904d6e797bb5e5517d651c2 13-Feb-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13210494>

Parse objective C information as efficiently as possible and without taking dangerous runtime locks.

Reworked the way objective C information is parsed by:
1 - don't read all class names up front, this is about 500K of data with names
2 - add a 32 bit hash map that maps a hash of a name to the Class pointer (isa)
3 - Improved name lookups by using the new hash map
4 - split up reading the objc runtime info into dynamic and shared cache since the shared cache only needs to be read once.
5 - When reading all isa values, also get the 32 bit hash instead of the name
6 - Read names lazily now that we don't need all names up front
7 - Allow the hash maps to not be there and still have this function correctly

There is dead code in here with all of the various methods I tried. I want to check this in first to not lose any of it in case we need to revert to any of the extra code. I will promptly cleanup and commit again.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@175101 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
89e248f04ecb87d0df4a4b96158c3fac0a3e43c7 09-Feb-2013 Jim Ingham <jingham@apple.com> Reworked the way Process::RunThreadPlan and the ThreadPlanCallFunction interoperate to fix problems where
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.

<rdar://problem/12993641>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174793 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
hreadPlan.h
hreadPlanBase.h
hreadPlanCallFunction.h
hreadPlanRunToAddress.h
hreadPlanStepInRange.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepOverBreakpoint.h
hreadPlanStepOverRange.h
hreadPlanStepThrough.h
hreadPlanStepUntil.h
2ddb2b8aed6d43665c6955255f6a077574a08412 01-Feb-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13092722>

Fix in loading mach files from memory when using DynamicLoaderMacOSXDYLD.

Removed the uuid mismatch warning that could be spit out and any time during debugging and removed the test case that was looking for that. Currently the "add-dsym" or "target symbols add" command will report an error when the UUID's don't match.

Be more careful when checking and resolving section + offset addresses to make sure none of the base addresses are invalid.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174222 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
be51f8a81ecf1f50b2843b7b3ecb8cfbc54d9787 31-Jan-2013 Jim Ingham <jingham@apple.com> Add "thread return -x" to unwind the innermost user called expression (if you happen to have stopped in it due to a crash.)
Make the message when you hit an crash while evaluating an expression a little clearer, and mention "thread return -x".

rdar://problem/13110464


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174095 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
f892c42725ed36c97e8ce10e758170cf6f1aff83 30-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/9141269>

Cleaned up the objective C name parsing code to use a class.

Now breakpoints that are set by name that are objective C methods without the leading '+' or '-' will resolve. We do this by expanding all the objective C names for a given string. For example:

(lldb) b [MyString cStringUsingEncoding:]

Will set a breakpoint with multiple possible names:
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]

Also if you have a category, it will strip the category and set a breakpoint in all variants:

(lldb) [MyString(my_category) cStringUsingEncoding:]

Will resolve to the following names:

-[MyString(my_category) cStringUsingEncoding:]
+[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]
+[MyString cStringUsingEncoding:]

Likewise when we have:

(lldb) b -[MyString(my_category) cStringUsingEncoding:]

It will resolve to two names:
-[MyString(my_category) cStringUsingEncoding:]
-[MyString cStringUsingEncoding:]





git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173858 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
090f83176695d86197b0e86b67dee4160ec5003d 26-Jan-2013 Jim Ingham <jingham@apple.com> Add "target.process.stop-on-shared-library-events" setting, and make it work.
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173555 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
rocess.h
36da2aa6dc5ad9994b638ed09eb81c44cc05540b 25-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13069948>

Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.

So I defined a new "lldb::offset_t" which should be used for all file offsets.

After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.

Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173463 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
egisterContext.h
1a469c75c0597abc2a9abdf86b624b2e71ea8650 23-Jan-2013 Enrico Granata <egranata@apple.com> <rdar://problem/12711206>

Extending ValueObjectDynamicValue so that it stores a TypeAndOrName instead of a TypeSP.
This change allows us to reflect the notion that a ValueObject can have a dynamic type for which we have no debug information.
Previously, we would coalesce that to the static type of the object, potentially losing relevant information or even getting it wrong.
This fix ensures we can correctly report the class name for Cocoa objects whose types are hidden classes that we know nothing about (e.g. __NSArrayI for immutable arrays).
As a side effect, our --show-types argument to frame variable no longer needs to append custom dynamic type information.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173216 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
4535891c699c40710e59d8ea966c4ad3ab19c077 21-Jan-2013 Enrico Granata <egranata@apple.com> <rdar://problem/12437929>

Providing a special mode of operator for "memory read -f c-str" which actually works in most common cases
Where the old behavior would provide:
(lldb) mem read --format s `foo`
0x100000f5d: NULL

Now we do:
(lldb) mem read --format s `foo`
0x100000f5d: "hello world"

You can also specify a count and that many strings will be showed starting at the initial address:
(lldb) mem read -c 2 -f c-str `foo`
0x100000f1d: "hello world"
0x100000f29: "short"



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173076 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
52ebc0aab1fdecb634801deceeddd71a14c2148c 19-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13010007>

Added the ability for OS plug-ins to lazily populate the thread this. The python OS plug-in classes can now implement the following method:

class OperatingSystemPlugin:
def create_thread(self, tid, context):
# Return a dictionary for a new thread to create it on demand

This will add a new thread to the thread list if it doesn't already exist. The example code in lldb/examples/python/operating_system.py has been updated to show how this call us used.

Cleaned up the code in PythonDataObjects.cpp/h:
- renamed all classes that started with PythonData* to be Python*.
- renamed PythonArray to PythonList. Cleaned up the code to use inheritance where
- Centralized the code that does ref counting in the PythonObject class to a single function.
- Made the "bool PythonObject::Reset(PyObject *)" function be virtual so each subclass can correctly check to ensure a PyObject is of the right type before adopting the object.
- Cleaned up all APIs and added new constructors for the Python* classes to they can all construct form:
- PyObject *
- const PythonObject &
- const lldb::ScriptInterpreterObjectSP &

Cleaned up code in ScriptInterpreterPython:
- Made calling python functions safer by templatizing the production of value formats. Python specifies the value formats based on built in C types (long, long long, etc), and code often uses typedefs for uint32_t, uint64_t, etc when passing arguments down to python. We will now always produce correct value formats as the templatized code will "do the right thing" all the time.
- Fixed issues with the ScriptInterpreterPython::Locker where entering the session and leaving the session had a bunch of issues that could cause the "lldb" module globals lldb.debugger, lldb.target, lldb.process, lldb.thread, and lldb.frame to not be initialized.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172873 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
rocess.h
64742744396c966e8de770e765130629b0c78335 16-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13009943>

Added a unique integer identifier to processes. Some systems, like JTAG or other simulators, might always assign the same process ID (pid) to the processes that are being debugged. In order for scripts and the APIs to uniquely identify the processes, there needs to be another ID. Now the SBProcess class has:

uint32_t SBProcess::GetUniqueID();

This integer ID will help to truly uniquely identify a process and help with appropriate caching that can be associated with a SBProcess object.





git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172628 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b794020ffbd6473c59a6e98be044df50abf7fc30 15-Jan-2013 Jim Ingham <jingham@apple.com> Separated the "expr --unwind-on-error" behavior into two parts, actual errors (i.e. crashes) which continue to be
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.

<rdar://problem/12986644>
<rdar://problem/9119325>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172503 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
hreadPlanCallFunction.h
hreadPlanCallUserExpression.h
d9735a1b6ba4b5ff85551bf19045504e03eb3603 12-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/12973809>

Fixed an issue with the auto loading of script resources in debug info files. Any platform can add support for this, and on MacOSX we allow dSYM files to contain python modules that get automatically loaded when a dSYM file is associated with an executable or shared library.

The modifications will now:
- Let the module locate the symbol file naturally instead of using a function that only works in certain cases. This helps us to locate the script resources as long as the dSYM file can be found.
- Don't try and do any of this if the script interpreter has scripting disabled.
- Allow more than one scripting resource to be found in a symbol file by returning the list
- Load the scripting resources when a symbol file is added via the "target symbols add" command.
- Be smarter about matching the dSYM mach-o file to an existing executable in the target images by stripping extensions on the symfile basname if needed.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172275 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
aad2b0f2e5da0ecbf22ab7fead4c06671f64c6c5 11-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/12990038>

Fixed an issue where the platform auto select code was changing the architecture and causing the wrong architecture to be assigned to the target.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172251 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
0e3b98e7de6d69613a9729bac9d4b965c0635698 09-Jan-2013 Jim Ingham <jingham@apple.com> Add an SBProcess API to get the current StopID, either considering or ignoring stops caused by expression
evaluation.

<rdar://problem/12968562>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@171914 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ccd5c4ee85d1592f9ae3da02c85f5647ca02fab2 08-Jan-2013 Han Ming Ong <hanming@apple.com> <rdar://problem/12976225>

Checking in the support for doing index ids reservation when given a thread id.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@171904 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hreadList.h
9c970a371511a0e31ba9360aa841d445792c1ab0 18-Dec-2012 Jim Ingham <jingham@apple.com> Adding events when watchpoints are set or changed.

<rdar://problem/11597849>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@170400 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
f2ca573e8dc034ecc5050a874d8f01ace0703e18 12-Dec-2012 Jim Ingham <jingham@apple.com> Fixed a few bugs in the "step in" thread plan logic.
Added a "step-in-target" flag to "thread step-in" so if you have something like:

Process 28464 stopped
* thread #1: tid = 0x1c03, function: main , stop reason = breakpoint 1.1
frame #0: 0x0000000100000e08 a.out`main at main.c:62
61
-> 62 int A6 = complex (a(4), b(5), c(6)); // Stop here to step targetting b and hitting breakpoint.
63

and you want to get into "complex" skipping a, b and c, you can do:

(lldb) step -t complex
Process 28464 stopped
* thread #1: tid = 0x1c03, function: complex , stop reason = step in
frame #0: 0x0000000100000d0d a.out`complex at main.c:44
41
42 int complex (int first, int second, int third)
43 {
-> 44 return first + second + third; // Step in targetting complex should stop here
45 }
46
47 int main (int argc, char const *argv[])



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@170008 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
2e2812388b75d3c62c9518cc1a6550ce29325aa6 11-Dec-2012 Jim Ingham <jingham@apple.com> Broadcast an event when the selected thread is changed.

<rdar://problem/10976636>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169810 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadList.h
0bce9a22354df3f00e68ffd912119a0741753b7f 05-Dec-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12649160>

Added the ability to debug through your process exec'ing itself to the same architecture.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169340 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
rocess.h
topInfo.h
arget.h
f14269add7f6fb84da7ccfd866f8e9f7e81068be 29-Nov-2012 Han Ming Ong <hanming@apple.com> <rdar://problem/12780259>

Prevent async and sync calls to get profile data from stomping on each other.
At the same time, don't use '$' as end delimiter per chunk of profile data.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168948 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
2d05dc6dc93ebe03e406ab93efeb420fa18fa25a 29-Nov-2012 Daniel Malea <daniel.malea@intel.com> Add 'class' keyword to friend definition (to fix gcc 4.6 build)



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168827 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
76b258db0611dad2f5b5ae51721a4bc0abd580ae 27-Nov-2012 Jim Ingham <jingham@apple.com> The Function calling thread plan was replacing the stored stop info too soon, causing recursive entry into the
breakpoint StopInfo's PerformAction, which is bad. Reworked this so that it is now correct.

<rdar://problem/12501259>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168634 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanCallFunction.h
1a00ab35c98b2acd393bb1ceee3e0e2bf4e02768 20-Nov-2012 Filipe Cabecinhas <me@filcab.net> Remove unneeded const qualifier

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168342 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
2827e26d7d85636dd0d934a7e15d9ef5b95fac67 20-Nov-2012 Filipe Cabecinhas <me@filcab.net> Remove unused member variable.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168339 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
559cf6e8b52b940f5f4362b32d628838d6301e2e 17-Nov-2012 Jason Molenda <jmolenda@apple.com> Han Ming's commit in r168228 had a bunch of 4-space tabs
in the source files. Expand to spaces. No content changes,
just whitespace.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168238 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
2529aa356e8cf9c1395da46f66ea2518dfa1982d 17-Nov-2012 Han Ming Ong <hanming@apple.com> Follow up on <rdar://12720514>. Removed commented out code.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168232 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
fb9cee64303d36d6fe5d87e63dd8701d1ddb70a9 17-Nov-2012 Han Ming Ong <hanming@apple.com> <rdar://problem/12720514> Sub-TLF: Provide service to profile the inferior

This allows client to query profiling states on the inferior.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168228 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
9210fdd7ef9cb0a7461b859916b65d3a5a5681e6 16-Nov-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12712928>

Removed an assert that was for debug only.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168190 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
d27e543e9c5f81ef1288afbc9e48de2da5976a8a 15-Nov-2012 Sean Callanan <scallanan@apple.com> In cases where the Objective-C ivar symbols are stripped out,
expressions that refer to ivars will not work because Clang
emits IR that refers to them to get the ivar offsets.
However, it is possible to search the runtime for these values.

I have added support for reading the relevant tables to the
Objective-C runtime, and extended ClangExpressionDeclMap to
query that information if and only if it doesn't find the symbols
in the binary.

Also added a testcase.

<rdar://problem/12628122>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168018 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
79f7143ebc923d1eaf62d671127a9dfe4b14a942 10-Nov-2012 Jim Ingham <jingham@apple.com> how to do it correctly.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@167656 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
0b2f5cc32d01cf48d6216a232ec87afab1466315 08-Nov-2012 Enrico Granata <egranata@apple.com> Minor cleanups to the new ModuleList notification APIs: passing in the ModuleList as part of the callbacks, and not copying the notifier as part of copy constructing and assigning


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@167592 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
146d9522c95c0c8c5409539813b55e08b99196ee 08-Nov-2012 Enrico Granata <egranata@apple.com> <rdar://problem/12586350>

This commit does three things:
(a) introduces a new notification model for adding/removing/changing modules to a ModuleList, and applies it to the Target's ModuleList, so that we make sure to always trigger the right set of actions
whenever modules come and go in a target. Certain spots in the code still need to "manually" notify the Target for several reasons, so this is a work in progress
(b) adds a new capability to the Platforms: locating a scripting resources associated to a module. A scripting resource is a Python file that can load commands, formatters, ... and any other action
of interest corresponding to the loading of a module. At the moment, this is only implemented on Mac OS X and only for files inside .dSYM bundles - the next step is going to be letting
the frameworks themselves hold their scripting resources. Implementors of platforms for other systems are free to implement "the right thing" for their own worlds
(c) hooking up items (a) and (b) so that targets auto-load the scripting resources as the corresponding modules get loaded in a target. This has a few caveats at the moment:
- the user needs to manually add the .py file to the dSYM (soon, it will also work in the framework itself)
- if two modules with the same name show up during the lifetime of an LLDB session, the second one won't be able to load its scripting resource, but will otherwise work just fine



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@167569 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
arget.h
91a9f2127fa8b8e90f6ea1676d11f97f44ce22dd 25-Oct-2012 Greg Clayton <gclayton@apple.com> Allow operating system plug-ins to specify the address for registers so we don't have to create data up front.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166701 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
90c6cd5764ed78d4b45606f6ee648c71ec298c03 25-Oct-2012 Greg Clayton <gclayton@apple.com> Changed the V1 and V2 runtimes to be able to detect when the ISA hash table has changed, and auto update as needed.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166693 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
ef22b90240618ed8056dac14a756dff574f8218a 24-Oct-2012 Greg Clayton <gclayton@apple.com> Objective C cleanup. Removed an cache that was no longer needed and changes the code that gets the dynamic type and class name to use our new Objective C cache.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166512 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
9e376625d6354d77cd6240007f0d42034dd3f1ee 23-Oct-2012 Jim Ingham <jingham@apple.com> Watchpoints remember the type of the expression or variable they were set with, and use
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166472 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
87e9d32a982a0fb76b8657a897ad5781f9a5d25e 19-Oct-2012 Greg Clayton <gclayton@apple.com> Added the infrastructure necessary for plug-ins to be able to add their own settings instead of having settings added to existing ones. In particular "target.disable-kext-loading" was added to "target" where it should actually be specific to the the dynamic loader plugin. Now the plug-in manager has the ability to create settings at the root level starting with "plugin". Each plug-in type can add new sub dictionaries, and then each plug-in can register a setting dictionary under its own short name. For example the DynamicLoaderDarwinKernel plug-in now registers a setting dictionary at:

plugin
dynamic-loader
macosx-kernel
(bool) disable-kext-loading

To settings can be set using:

(lldb) settings set plugin.dynamic-loader.macosx-kernel.disable-kext-loading true

I currently only hooked up the DynamicLoader plug-ins, but the code is very easy to duplicate when and if we need settings for other plug-ins.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166294 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
127291c8222625f1c8e31dfbb41c95103251ff56 19-Oct-2012 Jason Molenda <jmolenda@apple.com> Add a new target setting to disable automatic loading of kext images
in a kernel debug session:

settings set target.disable-kext-loading true

<rdar://problem/12490623>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166262 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
2e7f313dc473b036788319690116b324cb44b765 19-Oct-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12491420>

Added a new setting that allows a python OS plug-in to detect threads and provide registers for memory threads. To enable this you set the setting:

settings set target.process.python-os-plugin-path lldb/examples/python/operating_system.py

Then run your program and see the extra threads.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166244 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ed0a0fbd021e44727469d6fa20cc337c58bd04c3 18-Oct-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12462048>
<rdar://problem/12068650>

More fixes to how we handle paths that are used to create a target.

This modification centralizes the location where and how what the user specifies gets resolved. Prior to this fix, the TargetList::CreateTarget variants took a FileSpec object which meant everyone had the opportunity to resolve the path their own way. Now both CreateTarget variants take a "const char *use_exe_path" which allows the TargetList::CreateTarget to centralize where the resolving happens and "do the right thing".




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166186 91177308-0d34-0410-b5e6-96231b3b80d8
argetList.h
0c8446cc220c429fb51f8f9864275c8b1c768533 18-Oct-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12462048>

LLDB changes argv[0] when debugging a symlink. Now we have the notion of argv0 in the target settings:

target.arg0 (string) =

There is also the program argument that are separate from the first argument that have existed for a while:

target.run-args (arguments) =

When running "target create <exe>", we will place the untouched "<exe>" into target.arg0 to ensure when we run, we run with what the user typed. This has been added to the ProcessLaunchInfo and all other needed places so we always carry around the:
- resolved executable path
- argv0
- program args

Some systems may not support separating argv0 from the resolved executable path and the ProcessLaunchInfo needs to carry all of this information along so that each platform can make that decision.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166137 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
47beabb1386be44e3f90dbc30a0b22c23b93a4dc 16-Oct-2012 Jim Ingham <jingham@apple.com> Add the ability to set timeout & "run all threads" options both from the "expr" command and from
the SB API's that evaluate expressions.

<rdar://problem/12457211>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166062 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
5d30ea748f55faa7542c1b3ba31fe36f402beee2 16-Oct-2012 Jason Molenda <jmolenda@apple.com> Add a new ABI plugin method which specifies whether the architecture
must push something on the stack for a function call or not. In
x86, the stack pointer is decremented when the caller's pc is saved
on the stack. In arm, the stack pointer and frame pointer don't
necessarily have to change for a function call, although most
functions need to use some stack space during their execution.

Use this information in the RegisterContextLLDB to detect invalid
unwind scenarios more accurately.

<rdar://problem/12348574>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166005 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
6bc24c10080b624a2782e6e42f683e5d65c6903c 16-Oct-2012 Jim Ingham <jingham@apple.com> Patch from Matt Kopec <matt.kopec@intel.com> to fix the problem that if two breakpoints were set on consecutive addresses, the continue from the
first breakpoint would skip the second.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166000 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
13193d5ae15f194102c14a5ccdc46e8db5c3d95f 13-Oct-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12491387>

I added the ability for a process plug-in to implement custom commands. All the lldb_private::Process plug-in has to do is override:

virtual CommandObject *
GetPluginCommandObject();

This object returned should be a multi-word command that vends LLDB commands. There is a sample implementation in ProcessGDBRemote that is hollowed out. It is intended to be used for sending a custom packet, though the body of the command execute function has yet to be implemented!



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@165861 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a510437e795477e5f629263d3d191d982c991733 11-Oct-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12331741>

Dynamic type code must be efficient and fast. Now it is.

Added ObjC v1 support for getting the complete list of ISA values.

The main flow of the AppleObjCRuntime subclasses is now they must override "virtual bool UpdateISAToDescriptorMap_Impl();". This function will update the complete list of ISA values and create ClassDescriptorSP objects for each one. Now we have the complete list of valid ISA values which we can use for verification when doing dynamic typing.

Refactored a bunch of stuff so that the AppleObjCRuntime subclasses don't have to implement as many functions as they used to.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@165730 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
94a5d0de4433dce556db59758f3d6124eb0e1a2a 10-Oct-2012 Jim Ingham <jingham@apple.com> Change the Thread constructor over to take a Process& rather than a ProcessSP. We can't create Threads with a NULL ProcessSP, so it makes no sense to use the SP.
Then make the Thread a Broadcaster, and get it to broadcast when the selected frame is changed (but only from the Command Line) and when Thread::ReturnFromFrame
changes the stack.
Made the Driver use this notification to print the new thread status rather than doing it in the command.
Fixed a few places where people were setting their broadcaster class by hand rather than using the static broadcaster class call.

<rdar://problem/12383087>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@165640 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
65529e3a02d91c25a779d8bac0c5bcd97c503ebd 10-Oct-2012 Sean Callanan <scallanan@apple.com> Thinned the AppleObjCRuntimeV2's class descriptors.
The following are now derived lazily:

- The name of the class (cached);
- the instance size of the class (not cached);

The following have been removed entirely:

- Whether the class is realized. This is an
implementation detail.
- The contents of the objc_class object. That
object can be read as needed.
- Whether the class is valid. The fact that
we vended a class to begin with means it's
valid. We will only give up looking parts
of it up if they are not in the format we
expect.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@165567 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
be2f3aac39c2f7e3e6cce513800b35fa4b8f5429 09-Oct-2012 Greg Clayton <gclayton@apple.com> Changes to clean up the runtime and how the ISA caches are managed.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@165516 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
b0e3c7c4d063da2cc6a2550ad4979d5c342c8306 29-Sep-2012 Jason Molenda <jmolenda@apple.com> Add the RelocateOrLoadKernel and LoadKernel methods to ProcessGDBRemote::DoRemoteConnect().
When attaching to a remote system that does not look like a typical vendor system, and no
executable binary was specified to lldb, check a couple of fixed locations where kernels
running in ASLR mode (slid in memory to a random address) store their load addr when booted
in debug mode, and relocate the symbols or load the kernel wholesale from the host computer
if we can find it.

<rdar://problem/7714201>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164888 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
fac2e62f08719ba800a440b7ad0d5a55a26dc620 29-Sep-2012 Jason Molenda <jmolenda@apple.com> Add support for debugging KASLR kernels via kdp (the kernel being
loaded at a random offset).

To get the kernel's UUID and load address I need to send a kdp
packet so I had to implement the kernel relocation (and attempt to
find the kernel if none was provided to lldb already) in ProcessKDP
-- but this code really properly belongs in DynamicLoaderDarwinKernel.

I also had to add an optional Stream to ConnectRemote so
ProcessKDP::DoConnectRemote can print feedback about the remote kernel's
UUID, load address, and notify the user if we auto-loaded the kernel via
the UUID.

<rdar://problem/7714201>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164881 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
d123b989d453c70244b04d4c9ef7792214e9010a 28-Sep-2012 Sean Callanan <scallanan@apple.com> Improved the runtime reading to also get data
out of the metaclass, so as to enumerate class
methods for an object.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164808 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
3acaa926c8f0d32da48db61a5fcb95276e6a4006 25-Sep-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/9959501>

More KDP debugging process. We can not set breakpoints, hit them, resume, step and detach while running.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164584 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
4155fe6231d3f7f55aeed2cf10d0529f11cc74e1 25-Sep-2012 Enrico Granata <egranata@apple.com> Making sure we do not try to compare a NULL string - which would cause us to crash

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164574 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
d83ecab0aeb229504737e34b2f03c07fcb967480 20-Sep-2012 Sean Callanan <scallanan@apple.com> More work for reading the Objective-C runtime.
We can now read the relevant data structures for
the method list, and use a callback mechanism to
report their details to the AppleObjCTypeVendor,
which constructs appropriate Clang types.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164310 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
81a5a09e76cfc1f110c0416e372f9f6cc27d79cf 18-Sep-2012 Sean Callanan <scallanan@apple.com> Objective-C runtime class descriptors can now
populate Clang ObjCInterfaceDecls with their
ivars, methods, and properties. The default
implementation does nothing. I have also made
sure that AppleObjCRuntimeV2 creates
ObjCInterfaceDecls that actually get queried
appropriately.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164164 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
4d0fa042181391e4fde953ebb5600d93022b3331 17-Sep-2012 Enrico Granata <egranata@apple.com> Make the Class Descriptors able to fetch the class name for unrealized classes

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164050 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
f59388aa57559d7d074613d65b88abacfd699845 14-Sep-2012 Jim Ingham <jingham@apple.com> Make the unwinding of the stack part of "thread return" work, and add the thread return command.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163867 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
hread.h
3bfaad6baec573ae2facf2f2acae0948c1a422bd 13-Sep-2012 Sean Callanan <scallanan@apple.com> Made the help for the -n option on
"target image lookup" a bit better
documented by indicating that it takes
symbols OR functions.

<rdar://problem/12281325>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163839 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
95b765e8000b44644d021e95bc58eac95028573b 12-Sep-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11374963>

Partial fix for the above radar where we now resolve dsym mach-o files within the dSYM bundle when using "add-dsym" through the platform.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163676 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
a17a81a1a9ff6b8d87c4a1e47dd874f6ea8a4f1d 12-Sep-2012 Jim Ingham <jingham@apple.com> Start at getting "thread return" working. Doesn't work yet.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163670 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hread.h
c718b9652bb1a7aea5d133123fcc8bc87277002c 11-Sep-2012 Sean Callanan <scallanan@apple.com> This patch is part of ongoing work to extract type
information from the Objective-C runtime.

This patch takes the old AppleObjCSymbolVendor and
replaces it with an AppleObjCTypeVendor, which is
much more lightweight. Specifically, the SymbolVendor
needs to pretend that there is a backing symbol file
for the Types it vends, whereas a TypeVendor only
vends bare ClangASTTypes. These ClangASTTypes only
need to exist in an ASTContext.

The ClangASTSource now falls back to the runtime's
TypeVendor (if one exists) if the debug information
doesn't find a complete type for a particular
Objective-C interface. The runtime's TypeVendor
maintains an ASTContext full of types it knows about,
and re-uses the ISA-based type query information used
by the ValueObjects.

Currently, the runtime's TypeVendor doesn't provide
useful answers because we haven't yet implemented a
way to iterate across all ISAs contained in the target
process's runtime. That's the next step.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163651 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
bjCLanguageRuntime.h
bb1af9ce3e25eae9916f85cb9a0c82e291c20bb4 11-Sep-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11935492>

Fixed an issue where if we call "Process::Destroy()" and the process is running, if we try to stop it and get "exited" back as the stop reason, we will still deliver the exited event.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163591 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
36de3c01c2f3ceac59b8e34b47c17fac200e27a1 08-Sep-2012 Jim Ingham <jingham@apple.com> Save and restore the current inlined depth over function calls.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163433 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
9b124c6bc79c0f650ac52d65d6366f45f30ee31d 08-Sep-2012 Jim Ingham <jingham@apple.com> Add SetCurrentInlinedDepth API.
In GetFramesUpTo, don't adjust the number of frames for the inlined depth if the number of frames in UINT32_MAX.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163432 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
45bc4a2bce24f397445ced0e8327fc0ad9a5b801 07-Sep-2012 Jim Ingham <jingham@apple.com> Ensure that the ShouldStopHere plans get called even when doing "virtual" steps.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163366 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInRange.h
d27026e46d8430fb451d85ac161a8492e1930245 05-Sep-2012 Enrico Granata <egranata@apple.com> Implementing an Options class for EvaluateExpression() in order to make the signature more compact and make it easy to 'just run an expression'

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163239 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
ae2ae94bd72daf435204e99a0e03ccc64470a843 04-Sep-2012 Enrico Granata <egranata@apple.com> <rdar://problem/11485744> Implement important data formatters in C++. Have the Objective-C language runtime plugin expose class descriptors objects akin to the objc_runtime.py Pythonic implementation. Rewrite the data formatters for some core Cocoa classes in C++ instead of Python.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163155 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
0c8fa2d7dd18ae1816c82846234c45f79142e3df 01-Sep-2012 Jim Ingham <jingham@apple.com> Initial check-in of "fancy" inlined stepping. Doesn't do anything useful unless you switch LLDB_FANCY_INLINED_STEPPING to true. With that
on, basic inlined stepping works, including step-over of inlined functions. But for some as yet mysterious reason i386 debugging gets an
assert and dies immediately. So for now its off.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163044 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
hread.h
hreadList.h
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
49ce8969d3154e1560106cfe530444c09410f217 29-Aug-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11757916>

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()

Cleaned up header includes a bit as well.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162860 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
ee5bba0f13cac9134ab8f7d23c387891b90e14b3 23-Aug-2012 Jim Ingham <jingham@apple.com> Fix some indenting.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162406 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
d0bdddff8bc6dd5f71492452ce2bbd72fdaa147b 22-Aug-2012 Jim Ingham <jingham@apple.com> Rework how the API mutex is acquired when filling out an ExecutionContext from an ExecutionContextRef,
particularly in the SBThread & SBFrame interfaces. Instead of filling the whole context & then getting
the API mutex, we now get only the target, acquire the API mutex from it, then fill out the rest of the
context. This removes a race condition where you get a ThreadSP, then wait on the API mutex while another
command Destroy's the Thread you've just gotten.
Also fixed the ExecutionContextRef::Get*SP calls so they don't return invalid objects.
Also fixed the ExecutionContext::Has*Scope calls so they don't claim to have a scope if the object representing
that scope has been destroyed.
Also fixed a think-o in Thread::IsValid which was causing it to return the opposite of the desired value.

<rdar://problem/11995490>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162401 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
rocess.h
hread.h
c6e82e4a323d7a7168b05365c53c9bc2e0d418e3 22-Aug-2012 Greg Clayton <gclayton@apple.com> Remove further outdated "settings" code and also implement a few missing things.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162376 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
73844aa19a7360b662e2be710fc3c969d6c86606 22-Aug-2012 Greg Clayton <gclayton@apple.com> Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation:
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads

Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162366 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
latform.h
rocess.h
arget.h
hread.h
9880efacdd3a5e855b405d89433a01170422a889 11-Aug-2012 Jim Ingham <jingham@apple.com> Add explicit casts to bool in "shared pointer is valid" constructs that return bool.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@161719 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
5a60f5e8c81e8263e0d8af85a4f1e6cd1594970a 04-Aug-2012 Enrico Granata <egranata@apple.com> <rdar://problem/12027563> Making sure that some class of stop-hook commands that involve po'ing objects do not cause an endless recursion

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@161271 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4f28c31e4b652a842ce6138b70ded44ffb3e8c48 01-Aug-2012 Sean Callanan <scallanan@apple.com> Instructions generated by a disassembler can now
keep a shared pointer to their disassembler. This
is important for the LLVM-C disassembler because
it needs to lock its parent in order to disassemble
itself.

This means that every interface that returned a
Disassembler* needs to return a DisassemblerSP, so
that the instructions and any external owners share
the same reference count on the object. I changed
all clients to use this shared pointer, which also
plugged a few leaks.

<rdar://problem/12002822>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@161123 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTracer.h
5d90ade8e8e0d776fe8e1b9e88fc1c86d02e8e4e 28-Jul-2012 Jim Ingham <jingham@apple.com> Added an lldb_private & equivalent SB API to send an AsyncInterrupt to the event loop.
Convert from calling Halt in the lldb Driver.cpp's input reader's sigint handler to sending this AsyncInterrupt so it can be handled in the
event loop.
If you are attaching and get an async interrupt, abort the attach attempt.
Also remember to destroy the process if get interrupted while attaching.
Getting this to work also required handing the eBroadcastBitInterrupt in a few more places in Process WaitForEvent & friends.

<rdar://problem/10792425>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160903 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
73f6b49b568f48755bb5058a3db679c3b9093682 25-Jul-2012 Jim Ingham <jingham@apple.com> Add a call to "sync" a thread state before checkpointing registers in preparation for
calling functions. This is necessary on Mac OS X, since bad things can happen if you set
the registers of a thread that's sitting in a kernel trap.

<rdar://problem/11145013>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160756 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
3a458eb1e413d39546b664813bba9f9ac292357e 20-Jul-2012 Jim Ingham <jingham@apple.com> Add "vAttachOrWait" to debugserver, so you can implement "attach to the process if it exists OR wait for it" without race conditions. Use that in lldb.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160578 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
6cca9695637b27bd583eaae310d5c09dede7cc49 17-Jul-2012 Enrico Granata <egranata@apple.com> <rdar://problem/11672978> Fixing an issue where an ObjC object might come out without a description because the expression used to obtain it would timeout before running to completion

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160326 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
b3a1a2bba41281ba56a99fe64887a8a04760784c 14-Jul-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11870357>

Allow "frame variable" to find ivars without the need for "this->" or "self->".


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160211 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
7de2a3b03f37987c67f142ce328cc2484c831468 14-Jul-2012 Enrico Granata <egranata@apple.com> <rdar://problem/11782789> Changes to the watchpoint implementation on ARM so that we single-step before stopping at the WP. This is necessary because on ARM the WP triggers before the opcode is actually executed, so we would be unable to continue since we would keep hitting the WP. We work around this by disabling the WP, single stepping and then putting the WP back in place.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160199 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
a7d3dc75ec4f46033c3f991f11fb58a058091a85 11-Jul-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11852100>

The "stop-line-count-after" and "stop-line-count-before" settings are broken. This fixes them.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160071 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
hread.h
545762f7780bece4e9255e052c0a50a1ea66ce57 07-Jul-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11357711>

Fixed a crasher where the section load list was not thread safe.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@159884 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
06b84494c72ceb559ca07ff5e2ccd2fe645b6363 04-Jul-2012 Jim Ingham <jingham@apple.com> Work around some problems destroying a process with older debugservers.

rdar://problem/11359989


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@159697 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
86827fbccc9a4d1f9993d74940f724d63d826e45 02-Jul-2012 Jim Ingham <jingham@apple.com> Add an "extra-startup-commands" process setting so we can send some command strings to the actual process plugin to interpret as it wishes.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@159511 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
5c5a38e7c640e9448241ec2aca0c60047ec3273c 28-Jun-2012 Greg Clayton <gclayton@apple.com> Added the ability to read the dSYM plist file with source remappings even when DebugSymbols isn't used to find the dSYM. We now parse the plist as XML in the MacOSX symbol vendor.

Added the ability to get a section load address given a target which is needed for a previous checking which saves crashlogs.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@159298 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
f90b5f34b87e0c1354b4d6f3d24830e69a2949a0 08-Jun-2012 Sean Callanan <scallanan@apple.com> Added a setting (target.process.disable-memory-cache)
that controls whether memory is cached. This is off
by default (i.e., memory is cached) because it greatly
improves performance.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158173 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4389256aecd2693109969c21fa2f00c4612320b3 06-Jun-2012 Jim Ingham <jingham@apple.com> Make sure that when if we are going to Halt while the process is in the middle of HandlePrivateEvent we
wait till that is done. We need a stronger way to do this, but in practice this works and using some locking
strategy is harder because Halt & HandlePrivateEvent generally happen on different threads.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158042 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
3f883496e92fce5011f6bf585af3ac6d1cddb64f 05-Jun-2012 Johnny Chen <johnny.chen@apple.com> rdar://problem/11584012

Refactorings of watchpoint creation APIs so that SBTarget::WatchAddress(), SBValue::Watch(), and SBValue::WatchPointee()
now take an additional 'SBError &error' parameter (at the end) to contain the reason if there is some failure in the
operation. Update 'watchpoint set variable/expression' commands to take advantage of that.

Update existing test cases to reflect the API change and add test cases to verify that the SBError mechanism works for
SBTarget::WatchAddress() by passing an invalid watch_size.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157964 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
b7b2532bf23c852ea3e43d10f2377338be5b464f 01-Jun-2012 Jim Ingham <jingham@apple.com> When the Platform launches a process for debugging, make sure it goes into a separate process group, otherwise ^C will both cause us to try to Stop it manually, AND send it a SIGINT, which can confuse us.

rdar://problem/11369230

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157791 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
7c09997f9a65bdfd9a0cbd7783d5a5f0a9f83646 24-May-2012 Johnny Chen <johnny.chen@apple.com> rdar://problem/11457634

Supports the use-case scenario of immediately continuing the process once attached.
Add a simple completion test case from "process attach --con" to "process attach --continue ".


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157361 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
7cbdcfb0cefcfd877b507ff2d83e51a1bde3fcc7 23-May-2012 Johnny Chen <johnny.chen@apple.com> Add the capability to display the number of supported hardware watchpoints to the "watchpoint list" command.

Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157345 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
293b98f5e24ef736766db37feedfefd3b215a0ce 22-May-2012 Filipe Cabecinhas <me@filcab.net> Remove trailing semicolons.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157240 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
rocess.h
2cf5ccbbbe3343a6c973d0d65ad5de178a414e30 22-May-2012 Jim Ingham <jingham@apple.com> Also push file & line breakpoints past the prologue. Also added a "-K" argument to the relevant
"break set" commands to set this per breakpoint. Also, some CreateBreakpoint API's in the lldb_private
namespace had "internal" first and "skip_prologue" second. "internal should always be last. Fixed that.

rdar://problem/11484729


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157225 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
6b1763b5ab8f182029807293d74a66e1e1c6bafd 21-May-2012 Enrico Granata <egranata@apple.com> <rdar://problem/11355592> Fixing a bug where we would incorrectly try and determine a dynamic type for a variable of a pointer type that is not a valid generic type for dynamic pointers.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157190 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
f7d782b70647870cdf3c2683b3a027660a9534d5 19-May-2012 Filipe Cabecinhas <me@filcab.net> Fixes the case where we created a dummy target, deleted it, and then tried to evaluate an expression with no target.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157110 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
dd29b97f71187509df339596c3397dea0e429754 19-May-2012 Greg Clayton <gclayton@apple.com> Found a quick way to improve the speed with which we can read object files from memory when they are in the shared cache: always read the symbol table strings from memory and let the process' memory cache do the work.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157083 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
cf5927ee246f5e431162f2753ed9e040dd060fe5 18-May-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11386214>
<rdar://problem/11455913>

"target symbol add" should flush the cached frames
"register write" should flush the thread state in case registers modifications change stack




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157042 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
hreadList.h
bd5c23ddf5bacc78548bbe348c8c5d98c372aedc 15-May-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11240464>

Correctly unique a class' methods when we detect that a class has been uniqued to another.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156795 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
arget.h
110b55f22f8cda703c4fb6f1c2affb8ccbef215b 11-May-2012 Jim Ingham <jingham@apple.com> Don't try to use "OkayToDiscard" to mean BOTH this plan is a user plan or not AND unwind on error.

rdar://problem/11419156


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156627 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
038fa8e30621e0e55faed3479387d811986f28b7 10-May-2012 Jim Ingham <jingham@apple.com> If the ObjC Step Through Trampoline plan causes a target crash, properly propagate the error back to
the controlling plans so that they don't lose control.

Also change "ThreadPlanStepThrough" to take the return StackID for its backstop breakpoint as an argument
to the constructor rather than having it try to figure it out itself, since it might get it wrong whereas
the caller always knows where it is coming from.

rdar://problem/11402287


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156529 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanCallFunction.h
hreadPlanStepThrough.h
f92ddcc2fda5ca564acc37d2fecd4b577dfc2bde 09-May-2012 Jim Ingham <jingham@apple.com> Print out a notification when the process of a target other than the currently selected target stops.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156433 91177308-0d34-0410-b5e6-96231b3b80d8
argetList.h
b170aee2daacc83e3d71c3e3acc9d56c89893a7b 08-May-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11358639>

Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.

Also make the selection process for auto selecting platforms based off of an arch much better.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156354 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
88e3de205708f14431559072ca258899b5ac31cc 03-May-2012 Jim Ingham <jingham@apple.com> Clean up the usage of "MasterPlan" status in ThreadPlans. Only user-initiated plans
should be MasterPlans that want to stay on the plan stack. So make all plans NOT
MasterPlans by default and then have the SB API's and the CommandObjectThread step
commands set this explicitly.

Also added a "clean up" phase to the Thread::ShouldStop so that if plans get stranded
on the stack, we can remove them. This is done by adding an IsPlanStale method to the
thread plans, and if the plan can know that it is no longer relevant, it returns true,
and the plan and its sub-plans will get discarded.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156101 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanStepOut.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
b5d55cf7a00d0f9e31a1664d372f8e570d562777 02-May-2012 Jim Ingham <jingham@apple.com> Cleanup - removing the ThreadPlanTestCondition and its helper functions. It is not needed,
since we now run the condition in the StopInfoBreakpoint's PerformAction, and don't need
to refer it to another "continue". Actually, we haven't needed to do this for a year or
so, I just hadn't gotten around to deleting the dead wood.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@155967 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTestCondition.h
707b7a858ce66b15d01177d4a38ff1ccde44f43c 01-May-2012 Jim Ingham <jingham@apple.com> Fix reporting of stop reasons when the StepOver & StepIn plans stop because of a crash or breakpoint. Added the ability for a plan to say it is done but doesn't want to be the reason for the stop.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@155927 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
e787c7ea61b1d857b56a0c42a1cf7535115ecbfc 20-Apr-2012 Jim Ingham <jingham@apple.com> Make sure the "synchronous breakpoint callbacks" get called before the thread plan logic gets invoked, and if they
ask to continue that should short-circuit the thread plans for that thread. Also add a bit more explanation for
how this machinery is supposed to work.
Also pass eExecutionPolicyOnlyWhenNeeded, not eExecutionPolicyAlways when evaluating the expression for breakpoint
conditions.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@155236 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
027aaa74a914823ab4c9cf8f3274d179e97fdb53 19-Apr-2012 Jim Ingham <jingham@apple.com> Switch to setting the write side of the run lock when we call Resume. Then make a PrivateResume that doesn't switch the run-lock state, and use that where we are resuming without changing the public resume state.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@155092 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a414e679c425c5bd1574f801c5bd8f516faa74cb 16-Apr-2012 Greg Clayton <gclayton@apple.com> Fixed the ability to load multiple __LINKEDIT segments at the same address for darwin shared cache entries. Now when registering the load address of a section, the DynamicLoader objects can specify if they should warn or not. This will fix the ability to load the nlist entries for shared libraries in the darwin shared caches when no on disk representation is available for a shared library.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154860 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
97471184b8823c949bc68bbf54ea3edf3845a750 14-Apr-2012 Greg Clayton <gclayton@apple.com> Added a new host function that allows us to run shell command and get the output from them along with the status and signal:

Error
Host::RunShellCommand (const char *command,
const char *working_dir,
int *status_ptr,
int *signo_ptr,
std::string *command_output_ptr,
uint32_t timeout_sec);

This will allow us to use this functionality in the host lldb_private::Platform, and also use it in our lldb-platform binary. It leverages the existing code in Host::LaunchProcess and ProcessLaunchInfo.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154730 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
1e58cef33bbfd953e2c9e7dc872c4c74e0d75352 13-Apr-2012 Jim Ingham <jingham@apple.com> Factor out a bunch of common code in the two ThreadPlanCallFunction constructors. Also add a sanity check - try reading the frame, and if we fail bag out.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154698 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
7fb143064009e34dbb7a602924e9807375f72a46 13-Apr-2012 Greg Clayton <gclayton@apple.com> Expose GetAddressClass() from both the SBAddress and SBInstruction so clients can tell the difference between ARM/Thumb opcodes when disassembling ARM.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154633 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
5ba82b9dfd5b9c6b8849a56bc74a6828d1dd109b 12-Apr-2012 Jim Ingham <jingham@apple.com> Cleanup, keep private types separate from private member variables.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154600 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ae932359b80098532f3c3766fa9e6527352fbb67 10-Apr-2012 Greg Clayton <gclayton@apple.com> Trying to solve our disappearing thread issues by making thread list updates safer.

The current ProcessGDBRemote function that updates the threads could end up with an empty list if any other thread had the sequence mutex. We now don't clear the thread list when we can't access it, and we also have changed how lldb_private::Process handles the return code from the:

virtual bool
Process::UpdateThreadList (lldb_private::ThreadList &old_thread_list,
lldb_private::ThreadList &new_thread_list) = 0;

A bool is now returned to indicate if the list was actually updated or not and the lldb_private::Process class will only update the stop ID of the validity of the thread list if "true" is returned.

The ProcessGDBRemote also got an extra assertion that will hopefully assert when running debug builds so we can find the source of this issue.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154365 91177308-0d34-0410-b5e6-96231b3b80d8
peratingSystem.h
rocess.h
2bcbaf625afd8f521da03ddaa146e7ea7650ee38 10-Apr-2012 Jim Ingham <jingham@apple.com> Rework how master plans declare themselves. Also make "PlanIsBasePlan" not rely only on this being the bottom plan in the stack, but allow the plan to declare itself as such.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154351 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanBase.h
hreadPlanCallFunction.h
hreadPlanStepOverRange.h
hreadPlanStepUntil.h
1831e78a6253392fca1c99e555e7adaa3f372647 07-Apr-2012 Jim Ingham <jingham@apple.com> We sometimes need to be able to call functions (via Process::RunThreadPlan) from code run on the private state thread. To do that we have to
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.

This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154230 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a894fe78bc15344a0025c1154e414c554ab31dd9 05-Apr-2012 Greg Clayton <gclayton@apple.com> Added a new Host class: ReadWriteLock

This abstracts read/write locks on the current host system. It is currently backed by pthread_rwlock_t objects so it should work on all unix systems.

We also need a way to control multi-threaded access to the process through the public API when it is running. For example it isn't a good idea to try and get stack frames while the process is running. To implement this, the lldb_private::Process class now contains a ReadWriteLock member variable named m_run_lock which is used to control the public process state. The public process state represents the state of the process as the client knows it. The private is used to control the actual current process state. So the public state of the process can be stopped, yet the private state can be running when evaluating an expression for example.

Adding the read/write lock where readers are clients that want the process to stay stopped, and writers are clients that run the process, allows us to accurately control multi-threaded access to the process.

Switched the SBThread and SBFrame over to us shared pointers to the ExecutionContextRef class instead of making their own class to track this. This fixed an issue with assigning on SBFrame to another and will also centralize the code that tracks weak references to execution context objects into one location.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154099 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
rocess.h
3feafabba22e8b7110d556cb1c8690461e391fdb 04-Apr-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11184458>

Found an issue where we might still have shared pointer references to lldb_private::Thread objects where the object itself is not valid and has been removed from the Process. When a thread is removed from a process, it will call Thread::DestroyThread() which well set a boolean member variable which is exposed now via:

bool
Thread::IsValid() const;

We then check the thread validity before handing out a shared pointer.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154048 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
2450cb19a85dcd4a14032bd96b16389416b4ff7f 29-Mar-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11035349>

Fixed an issue with stepping where the stack frame list could get changed out from underneath you when multiple threads start accessing frame info.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@153627 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
9ab696e40530fa966e08cab7af77ea62e4fff1c0 27-Mar-2012 Greg Clayton <gclayton@apple.com> lldb_private::Section objects have a boolean flag that can be set that
indicates that the section is thread specific. Any functions the load a module
given a slide, will currently ignore any sections that are thread specific.

lldb_private::Section now has:

bool
Section::IsThreadSpecific () const
{
return m_thread_specific;
}

void
Section::SetIsThreadSpecific (bool b)
{
m_thread_specific = b;
}

The ELF plug-in has been modified to set this for the ".tdata" and the ".tbss"
sections.

Eventually we need to have each lldb_private::Thread subclass be able to
resolve a thread specific section, but for now they will just not resolve. The
code for that should be trivual to add, but the address resolving functions
will need to be changed to take a "ExecutionContext" object instead of just
a target so that thread specific sections can be resolved.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@153537 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
dba1de8d585f27601162f674d30ab71d9c83ccde 27-Mar-2012 Enrico Granata <egranata@apple.com> Synthetic values are now automatically enabled and active by default. SBValue is set up to always wrap a synthetic value when one is available.
A new setting enable-synthetic-value is provided on the target to disable this behavior.
There also is a new GetNonSyntheticValue() API call on SBValue to go back from synthetic to non-synthetic. There is no call to go from non-synthetic to synthetic.
The test suite has been changed accordingly.
Fallout from changes to type searching: an hack has to be played to make it possible to use maps that contain std::string due to the special name replacement operated by clang
Fixing a test case that was using libstdcpp instead of libc++ - caught as a consequence of said changes to type searching


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@153495 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
b1db658333cdebca31a128be95e926d80c3c7796 20-Mar-2012 Greg Clayton <gclayton@apple.com> Platforms can now auto-select themselves if you specify a full target triple when doing a "target create" command.

Each platform now knows if it can handle an architecture and a platform can be found using an architecture. Each platform can look at the arch, vendor and OS and know if it should be used or not.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@153104 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
arget.h
argetList.h
2418fddf2e200c827da5bc6c855f3d4971b2d867 19-Mar-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11072382>

Fixed a case where the source path remappings on the module were too expensive to
use when we try to verify (stat the file system) that the remapped path points to
a valid file. Now we will use the lldb_private::Module path remappings (if any) when
parsing the debug info without verifying that the paths exist so we don't slow down
line table parsing speeds.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@153059 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
964deba8853eb794e59263322b59b09b43669618 15-Mar-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/8196933>

Use the metadata in the dSYM bundle Info.plist to remap source paths when they keys are available.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152836 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
598df88bd6fc33c6fb330bc859bdc277795501f3 14-Mar-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/10434005>

Prepare LLDB to be built with C++11 by hiding all accesses to std::tr1 behind
macros that allows us to easily compile for either C++.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152698 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
rocess.h
egisterContext.h
tackFrame.h
arget.h
hread.h
e31176627725f4236c9ca049edc027756709780b 10-Mar-2012 Jim Ingham <jingham@apple.com> Fix the process of getting the ObjC runtime - if we ask for it too early (in the process of handling the
load notification for the first load) then we will set it the runtime to NULL and won't re-search for it.
Added a way for the dynamic loader to force a re-search, since it knows the world has changed.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152453 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b2cf58a817f6c0d15b2077316810c17d9c8ac173 09-Mar-2012 Jim Ingham <jingham@apple.com> First stage of implementing step by "run to next branch". Doesn't work yet, is turned off.
<rdar://problem/10975912>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152376 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
hreadPlanTracer.h
6e12c7a5a851f661677b16c544aac2f93fb6e86d 08-Mar-2012 Sean Callanan <scallanan@apple.com> Updated the revision of LLVM/Clang used by LLDB.
This takes two important changes:

- Calling blocks is now supported. You need to
cast their return values, but that works fine.

- We now can correctly run JIT-compiled
expressions that use floating-point numbers.

Also, we have taken a fix that allows us to
ignore access control in Objective-C as in C++.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152286 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
a266491ca4bcb46339b7b59626946d3f99faf358 07-Mar-2012 Jim Ingham <jingham@apple.com> When comparing a Thread against a ThreadSpec, don't fetch the Thread's Name or QueueName if the ThreadSpec doesn't specify them.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152245 91177308-0d34-0410-b5e6-96231b3b80d8
hreadSpec.h
95ec1688db0efe51509ad9356052f5004d8856e0 06-Mar-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/10840355>

Fixed STDERR to not be opened as readable. Also cleaned up some of the code that implemented the file actions as some of the code was using the wrong variables, they now use the right ones (in for stdin, out for stdout, err for stderr).



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152102 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4722b10307668368bf0f12fa6b8691e4f4cb5488 06-Mar-2012 Jim Ingham <jingham@apple.com> Add a command and an SB API to create exception breakpoints. Make the break output prettier for Exception breakpoints.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152081 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
arget.h
3df164e694d4e03905f8725c46b68b8dcc104deb 05-Mar-2012 Jim Ingham <jingham@apple.com> Make it possible to set Exception breakpoints when the target doesn't yet
have a process, then fetch the right runtime resolver when the process is made.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152015 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
arget.h
c105362e1fd33664939811569dc4a540959e7db7 03-Mar-2012 Jim Ingham <jingham@apple.com> First step to making an LanguageRuntime Exception breakpoint API.
<rdar://problem/10196277>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151965 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
arget.h
c86723f0a71f5d929f4543c544d9255da52ea49d 02-Mar-2012 Han Ming Ong <hanming@apple.com> <rdar://problem/10967188>

When using launch_info for launching with a target already set, we should just prepend the target's path as the first argument.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151867 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
41ce4f1706ddd3a092c331ff15917e7f600f2e94 01-Mar-2012 Jim Ingham <jingham@apple.com> Purge a couple more uses of stack count for stepping.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151833 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInstruction.h
hreadPlanStepThrough.h
441e3b9e8bed8c67afd5e520966d7ca16579eac4 01-Mar-2012 Jim Ingham <jingham@apple.com> Convert the thread plans over from using the stack count to do their logic to using StackID's. This
should be more efficient.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151780 91177308-0d34-0410-b5e6-96231b3b80d8
tackID.h
hreadPlan.h
hreadPlanStepOut.h
hreadPlanStepRange.h
hreadPlanStepUntil.h
bf97d74c0c3e9a0f7c89fe0cd4a059015ec482d5 29-Feb-2012 Jim Ingham <jingham@apple.com> Make the StackFrameList::GetFrameAtIndex only fetch as many stack frames as needed to
get the frame requested.
<rdar://problem/10943135>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151705 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
hread.h
nwind.h
444fe998bf707bd076a70c3a779db8575533695e 26-Feb-2012 Greg Clayton <gclayton@apple.com> Made a ModuleSpec class in Module.h which can specify a module using one or
more of the local path, platform path, associated symbol file, UUID, arch,
object name and object offset. This allows many of the calls that were
GetSharedModule to reduce the number of arguments that were used in a call
to these functions. It also allows a module to be created with a ModuleSpec
which allows many things to be specified prior to any accessors being called
on the Module class itself.

I was running into problems when adding support for "target symbol add"
where you can specify a stand alone debug info file after debugging has started
where I needed to specify the associated symbol file path and if I waited until
after construction, the wrong symbol file had already been located. By using
the ModuleSpec it allows us to construct a module with as little or as much
information as needed and not have to change the parameter list.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151476 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
arget.h
116a5cd7b8a0ec7929f10281cd708edb2bf20ffa 25-Feb-2012 Johnny Chen <johnny.chen@apple.com> Make the Watchpoint IDs unique per target, not across targets as before.
Now Each newly created target has its Watchpoint IDs as 1, 2, 3 ...


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151435 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
d1040dd360c07305a30d33b5d4501cb9dfb03114 25-Feb-2012 Han Ming Ong <hanming@apple.com> <rdar://problem/3535148>

Added ability to debug root processes on OS X. This uses XPC service that is available on Lion and above only.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151419 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
0a8dcacde404c520f1131c641041dceb9f68b6fa 24-Feb-2012 Greg Clayton <gclayton@apple.com> Added the new way we will eventually do all attaches and launches. First clients
will fill out either a SBLaunchInfo or SBAttachInfo class, then call:

SBProcess SBTarget::Launch (SBLaunchInfo &, SBError &);
SBProcess SBTarget::Attach (SBAttachInfo &, SBError &);

The attach is working right now and allows the ability to set many filters such
as the parent process ID, the user/group ID, the effective user/group ID, and much
more.

The launch is not yet working, but I will get this working soon. By changing our
launch and attach calls to take an object, it allows us to add more capabilities to
launching and attaching without having to have launch and attach functions that
take more and more arguments.

Once this is all working we will deprecated the older launch and attach fucntions
and eventually remove them.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151344 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
931acecd4e3af534028936431dc0f75a9fd6eb02 23-Feb-2012 Sean Callanan <scallanan@apple.com> Added support for looking up the complete type for
Objective-C classes. This allows LLDB to find
ivars declared in class extensions in modules other
than where the debugger is currently stopped (we
already supported this when the debugger was
stopped in the same module as the definition).

This involved the following main changes:

- The ObjCLanguageRuntime now knows how to hunt
for the authoritative version of an Objective-C
type. It looks for the symbol indicating a
definition, and then gets the type from the
module containing that symbol.

- ValueObjects now report their type with a
potential override, and the override is set if
the type of the ValueObject is an Objective-C
class or pointer type that is defined somewhere
other than the original reported type. This
means that "frame variable" will always use the
complete type if one is available.

- The ClangASTSource now looks for the complete
type when looking for ivars. This means that
"expr" will always use the complete type if one
is available.

- I added a testcase that verifies that both
"frame variable" and "expr" work.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151214 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
761133029ba2d5bb0c21c3a871dede340b2775fc 22-Feb-2012 Greg Clayton <gclayton@apple.com> For stepping performance I added the ability to outlaw all memory accesseses
to the __PAGEZERO segment on darwin. The dynamic loader now correctly doesn't
slide __PAGEZERO and it also registers it as an invalid region of memory. This
allows us to not make any memory requests from the local or remote debug session
for any addresses in this region. Stepping performance can improve when uninitialized
local variables that point to locations in __PAGEZERO are attempted to be read
from memory as we won't even make the memory read or write request.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151128 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
rocess.h
f4124deeb9532044a38c0774ced872f2709347da 21-Feb-2012 Greg Clayton <gclayton@apple.com> Thread hardening part 3. Now lldb_private::Thread objects have std::weak_ptr
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.

Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151009 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
hread.h
nwindAssembly.h
289afcb5e26c2527a0d2e71f84e780b86bbcf90a 18-Feb-2012 Greg Clayton <gclayton@apple.com> The second part in thread hardening the internals of LLDB where we make
the lldb_private::StackFrame objects hold onto a weak pointer to the thread
object. The lldb_private::StackFrame objects the the most volatile objects
we have as when we are doing single stepping, frames can often get lost or
thrown away, only to be re-created as another object that still refers to the
same frame. We have another bug tracking that. But we need to be able to
have frames no longer be able to get the thread when they are not part of
a thread anymore, and this is the first step (this fix makes that possible
but doesn't implement it yet).

Also changed lldb_private::ExecutionContextScope to return shared pointers to
all objects in the execution context to further thread harden the internals.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150871 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContextScope.h
rocess.h
egisterContext.h
tackFrame.h
arget.h
hread.h
b4d7fc0c466d446876e5f2d701f0e574dd0be8e7 17-Feb-2012 Greg Clayton <gclayton@apple.com> This checking is part one of trying to add some threading safety to our
internals. The first part of this is to use a new class:

lldb_private::ExecutionContextRef

This class holds onto weak pointers to the target, process, thread and frame
and it also contains the thread ID and frame Stack ID in case the thread and
frame objects go away and come back as new objects that represent the same
logical thread/frame.

ExecutionContextRef objcets have accessors to access shared pointers for
the target, process, thread and frame which might return NULL if the backing
object is no longer available. This allows for references to persistent program
state without needing to hold a shared pointer to each object and potentially
keeping that object around for longer than it needs to be.

You can also "Lock" and ExecutionContextRef (which contains weak pointers)
object into an ExecutionContext (which contains strong, or shared pointers)
with code like

ExecutionContext exe_ctx (my_obj->GetExectionContextRef().Lock());



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150801 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
tackFrameList.h
tackID.h
hread.h
5a15e6927b5b3234fb3e688717297ba6b5dd6ad7 16-Feb-2012 Jim Ingham <jingham@apple.com> Add a general mechanism to wait on the debugger for Broadcasters of a given class/event bit set.
Use this to allow the lldb Driver to emit notifications for breakpoint modifications.
<rdar://problem/10619974>


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150665 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
argetList.h
9ce953807eb814a93b449dc243de4f7bf32c3115 14-Feb-2012 Greg Clayton <gclayton@apple.com> Full core file support has been added for mach-o core files.

Tracking modules down when you have a UUID and a path has been improved.

DynamicLoaderDarwinKernel no longer parses mach-o load commands and it
now uses the memory based modules now that we can load modules from memory.

Added a target setting named "target.exec-search-paths" which can be used
to supply a list of directories to use when trying to look for executables.
This allows one or more directories to be used when searching for modules
that may not exist in the SDK/PDK. The target automatically adds the directory
for the main executable to this list so this should help us in tracking down
shared libraries and other binaries.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150426 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
arget.h
46c9a355af9b39db78c006b2a5cbf97d3c58d947 09-Feb-2012 Greg Clayton <gclayton@apple.com> First pass at mach-o core file support is in. It currently works for x86_64
user space programs. The core file support is implemented by making a process
plug-in that will dress up the threads and stack frames by using the core file
memory.

Added many default implementations for the lldb_private::Process functions so
that plug-ins like the ProcessMachCore don't need to override many many
functions only to have to return an error.

Added new virtual functions to the ObjectFile class for extracting the frozen
thread states that might be stored in object files. The default implementations
return no thread information, but any platforms that support core files that
contain frozen thread states (like mach-o) can make a module using the core
file and then extract the information. The object files can enumerate the
threads and also provide the register state for each thread. Since each object
file knows how the thread registers are stored, they are responsible for
creating a suitable register context that can be used by the core file threads.

Changed the process CreateInstace callbacks to return a shared pointer and
to also take an "const FileSpec *core_file" parameter to allow for core file
support. This will also allow for lldb_private::Process subclasses to be made
that could load crash logs. This should be possible on darwin where the crash
logs contain all of the stack frames for all of the threads, yet the crash
logs only contain the registers for the crashed thrad. It should also allow
some variables to be viewed for the thread that crashed.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150154 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hreadList.h
b5a8f1498e1ddaeed5187a878d57ea0b74af9c26 05-Feb-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/10560053>

Fixed "target modules list" (aliased to "image list") to output more information
by default. Modified the "target modules list" to have a few new options:

"--header" or "-h" => show the image header address
"--offset" or "-o" => show the image header address offset from the address in the file (the slide applied to the shared library)

Removed the "--symfile-basename" or "-S" option, and repurposed it to
"--symfile-unique" "-S" which will show the symbol file if it differs from
the executable file.

ObjectFile's can now be loaded from memory for cases where we don't have the
files cached locally in an SDK or net mounted root. ObjectFileMachO can now
read mach files from memory.

Moved the section data reading code into the ObjectFile so that the object
file can get the section data from Process memory if the file is only in
memory.

lldb_private::Module can now load its object file in a target with a rigid
slide (very common operation for most dynamic linkers) by using:

bool
Module::SetLoadAddress (Target &target, lldb::addr_t offset, bool &changed)

lldb::SBModule() now has a new constructor in the public interface:

SBModule::SBModule (lldb::SBProcess &process, lldb::addr_t header_addr);

This will find an appropriate ObjectFile plug-in to load an image from memory
where the object file header is at "header_addr".




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149804 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
bad9753828b6e0e415e38094bb9627e41d57874c 03-Feb-2012 Enrico Granata <granata.enrico@gmail.com> Adding support for an "equivalents map". This can be useful when compilers emit multiple, different names for the same actual type. In such scenarios, one of the type names can actually be found during a type lookup, while the others are just aliases. This can cause issues when trying to work with these aliased names and being unable to resolve them to an actual type (e.g. getting an SBType for the aliased name).
Currently, no code is using this feature, since we can hopefully rely on the new template support in SBType to get the same stuff done, but the support is there just in case it turns out to be useful for some future need.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149661 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
149d1f525c4744c41984d4b9dab78f6a8ba1d147 01-Feb-2012 Jim Ingham <jingham@apple.com> Threads now store their "temporary" resume state, so we know whether they were suspended in the most
recent step, and if they weren't allowed to run, don't ask questions about their state unless explicitly
requested to do so.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149443 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
334d33a19fd28cf41cba74cc61cf149e7101a603 30-Jan-2012 Greg Clayton <gclayton@apple.com> SBFrame is now threadsafe using some extra tricks. One issue is that stack
frames might go away (the object itself, not the actual logical frame) when
we are single stepping due to the way we currently sometimes end up flushing
frames when stepping in/out/over. They later will come back to life
represented by another object yet they have the same StackID. Now when you get
a lldb::SBFrame object, it will track the frame it is initialized with until
the thread goes away or the StackID no longer exists in the stack for the
thread it was created on. It uses a weak_ptr to both the frame and thread and
also stores the StackID. These three items allow us to determine when the
stack frame object has gone away (the weak_ptr will be NULL) and allows us to
find the correct frame again. In our test suite we had such cases where we
were just getting lucky when something like this happened:

1 - stop at breakpoint
2 - get first frame in thread where we stopped
3 - run an expression that causes the program to JIT and run code
4 - run more expressions on the frame from step 2 which was very very luckily
still around inside a shared pointer, yet, not part of the current
thread (a new stack frame object had appeared with the same stack ID and
depth).

We now avoid all such issues and properly keep up to date, or we start
returning errors when the frame doesn't exist and always responds with
invalid answers.

Also fixed the UserSettingsController (not going to rewrite this just yet)
so that it doesn't crash on shutdown. Using weak_ptr's came in real handy to
track when the master controller has already gone away and this allowed me to
pull out the previous NotifyOwnerIsShuttingDown() patch as it is no longer
needed.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149231 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
13d24fb1817faa7ccc4cfd799113ba1a2b8968eb 29-Jan-2012 Greg Clayton <gclayton@apple.com> Switching back to using std::tr1::shared_ptr. We originally switched away
due to RTTI worries since llvm and clang don't use RTTI, but I was able to
switch back with no issues as far as I can tell. Once the RTTI issue wasn't
an issue, we were looking for a way to properly track weak pointers to objects
to solve some of the threading issues we have been running into which naturally
led us back to std::tr1::weak_ptr. We also wanted the ability to make a shared
pointer from just a pointer, which is also easily solved using the
std::tr1::enable_shared_from_this class.

The main reason for this move back is so we can start properly having weak
references to objects. Currently a lldb_private::Thread class has a refrence
to its parent lldb_private::Process. This doesn't work well when we now hand
out a SBThread object that contains a shared pointer to a lldb_private::Thread
as this SBThread can be held onto by external clients and if they end up
using one of these objects we can easily crash.

So the next task is to start adopting std::tr1::weak_ptr where ever it makes
sense which we can do with lldb_private::Debugger, lldb_private::Target,
lldb_private::Process, lldb_private::Thread, lldb_private::StackFrame, and
many more objects now that they are no longer using intrusive ref counted
pointer objects (you can't do std::tr1::weak_ptr functionality with intrusive
pointers).



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149207 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
rocess.h
egisterContext.h
tackFrame.h
arget.h
hread.h
hreadList.h
662e56733faaeee932eba120d756257682f1bf04 19-Jan-2012 Greg Clayton <gclayton@apple.com> Fixed an issue with the Instruction subclasses where the strings might
be fetched too many times and the DisassemblerLLVM was appending to strings
when the opcode, mnemonic and comment accessors were called multiple times
and if any of the strings were empty.

Also fixed the test suite failures from recent Objective C modifications.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@148460 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
e14d3d3209f4260acc6e84d656460d5bdeade2c2 19-Jan-2012 Greg Clayton <gclayton@apple.com> Added an extra way to chop up an objective C prototype and use it where necessary.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@148445 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
22834bef08349978a701d0c91a71990bbd49033f 09-Jan-2012 Greg Clayton <gclayton@apple.com> Fixed a return value problem with the new ABI::FixCodeAddress () function:

it was checked in as:
virtual bool ABI::FixCodeAddress (lldb::addr_t pc);

when it should have been:

virtual lldb::addr_t ABI::FixCodeAddress (lldb::addr_t pc);





git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@147790 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
fc984a09c47b592e7cde20f163c1795a9e0f21fc 08-Jan-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/10645694>

Fixed an ARM backtracing issue where if the previous frame was a thumb
function and it was a tail call so that the current frame returned to
an address that would fall into the next function, we would use the
next function as the basis for how we unwound the previous frame's
registers and of course get things wrong. We now fix the PC code
address using the current ABI plug-in, and the ARM ABI plug-in has
been modified to correctly fix the code address. So when we do the
symbol context lookup, instead of taking an address like 0x1001 and
decrementing 1, and looking up the symbol context for a frame, we
now correctly fix 0x1001 to 0x1000, then decrement that by 1 to
get the correct symbol context.

I added a bunch more logging to "log enable lldb uwnind" to help
us in the future. We now log the PC, FP and SP (if they are available),
and we also dump the "active_row" that we find for unwinding a frame.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@147747 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
016ef8886cd429f8a53bff967e601f831e409eaa 22-Dec-2011 Jim Ingham <jingham@apple.com> Improve the x86_64 return value decoder to handle most structure returns.
Switch from GetReturnValue, which was hardly ever used, to GetReturnValueObject
which is much more convenient.
Return the "return value object" as a persistent variable if requested.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@147157 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hreadPlanCallFunction.h
daa6efe771f5f068e29328a774fa5bf2358ce14a 21-Dec-2011 Sean Callanan <scallanan@apple.com> The "desired result type" code in the expression
parser has hitherto been an implementation waiting
for a use. I have now tied the '-o' option for
the expression command -- which indicates that the
result is an Objective-C object and needs to be
printed -- to the ExpressionParser, which
communicates the desired type to Clang.

Now, if the result of an expression is determined
by an Objective-C method call for which there is
no type information, that result is implicitly
cast to id if and only if the -o option is passed
to the expression command. (Otherwise if there
is no explicit cast Clang will issue an error.
This behavior is identical to what happened before
r146756.)

Also added a testcase for -o enabled and disabled.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@147099 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
1586d9720002e407a3a097baf302de5fa4ca9c1b 17-Dec-2011 Jim Ingham <jingham@apple.com> Add the ability to capture the return value in a thread's stop info, and print it
as part of the thread format output.
Currently this is only done for the ThreadPlanStepOut.
Add a convenience API ABI::GetReturnValueObject.
Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than
trying to hand out one of its subsidiary object's pointers. That way this will always
be good.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146806 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
topInfo.h
hread.h
hreadPlan.h
hreadPlanStepOut.h
4a2e33769873d68d5703da5742c0e248f46e3a72 15-Dec-2011 Greg Clayton <gclayton@apple.com> Expose new read memory fucntion through python in SBProcess:

size_t
SBProcess::ReadCStringFromMemory (addr_t addr, void *buf, size_t size, lldb::SBError &error);

uint64_t
SBProcess::ReadUnsignedFromMemory (addr_t addr, uint32_t byte_size, lldb::SBError &error);

lldb::addr_t
SBProcess::ReadPointerFromMemory (addr_t addr, lldb::SBError &error);

These ReadCStringFromMemory() has some SWIG type magic that makes it return the
python string directly and the "buf" is not needed:

error = SBError()
max_cstr_len = 256
cstr = lldb.process.ReadCStringFromMemory (0x1000, max_cstr_len, error)
if error.Success():
....

The other two functions behave as expteced. This will make it easier to get integer values
from the inferior process that are correctly byte swapped. Also for pointers, the correct
pointer byte size will be used.

Also cleaned up a few printf style warnings for the 32 bit lldb build on darwin.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146636 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
84985174d8b0fe4913caf446f7789f1531317650 14-Dec-2011 Jason Molenda <jmolenda@apple.com> On Mac OS X the Objective-C runtime (libobjc) has many critical
dispatch functions that are implemented in hand-written assembly.
There is also hand-written eh_frame instructions for unwinding
from these functions.

Normally we don't use eh_frame instructions for the currently
executing function, prefering the assembly instruction profiling
method. But in these hand-written dispatch functions, the
profiling is doomed and we should use the eh_frame instructions.

Unfortunately there's no easy way to flag/extend the eh_frame/debug_frame
sections to annotate if the unwind instructions are accurate at
all addresses ("asynchronous") or if they are only accurate at locations
that can throw an exception ("synchronous" and the normal case for
gcc/clang generated eh_frame/debug_frame CFI).

<rdar://problem/10508134>



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146551 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
1f9c39c3c146f3c057575f53707e97019f402c46 13-Dec-2011 Jason Molenda <jmolenda@apple.com> When unwinding from the first frame, try to ask the remote debugserver
if this is a mapped/executable region of memory. If it isn't, we've jumped
through a bad pointer and we know how to unwind the stack correctly based
on the ABI.

Previously I had 0x0 special cased but if you jumped to 0x2 on x86_64 one
frame would be skipped because the unwinder would try using the x86_64
ArchDefaultUnwindPlan which relied on the rbp.

Fixes <rdar://problem/10508291>



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146477 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
931449ee91b1a3acf0cd8ab2e1dd1285d7c42ad4 12-Dec-2011 Johnny Chen <johnny.chen@apple.com> rdar://problem/10227672

There were two problems associated with this radar:
1. "settings show target.source-map" failed to show the source-map after, for example,
"settings set target.source-map /Volumes/data/lldb/svn/trunk/test/source-manager /Volumes/data/lldb/svn/trunk/test/source-manager/hidden"
has been executed to set the source-map.
2. "list -n main" failed to display the source of the main() function after we properly set the source-map.

The first was fixed by adding the missing functionality to TargetInstanceSettings::GetInstanceSettingsValue (Target.cpp)
and updating the support files PathMappingList.h/.cpp; the second by modifying SourceManager.cpp to fix several places
with incorrect logic.

Also added a test case test_move_and_then_display_source() to TestSourceManager.py, which moves main.c to hidden/main.c,
sets target.source-map to perform the directory mapping, and then verifies that "list -n main" can still show the main()
function.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146422 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
ad382c523709e86f01bfea27f1991df9afeef2dd 03-Dec-2011 Jim Ingham <jingham@apple.com> Make the ThreadPlanStepThrough set a backstop breakpoint on the return address from
the function it is being asked to step through, so that even if we get the trampoline
target wrong (for instance) we will still not lose control.

The other fix here is to tighten up the handling of the case where the current plan
doesn't explain the stop, but a plan above us does. In that case, if the plan that
does explain the stop says it is done, we need to clean up the plans below it and
continue on with our processing.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145740 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInRange.h
hreadPlanStepOut.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
hreadPlanStepThrough.h
d9919d3f46c5069eef065a27f96abc021330d5f3 02-Dec-2011 Greg Clayton <gclayton@apple.com> Process IDs (lldb::pid_t) and thread IDs (lldb::tid_t) are now 64 bit. This
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145644 91177308-0d34-0410-b5e6-96231b3b80d8
hreadList.h
fa21ffd0c50efce27bfa084c6fb33dff255288b0 01-Dec-2011 Johnny Chen <johnny.chen@apple.com> rdar://problem/10501020

ClangASTSource::~ClangASTSource() was calling

ClangASTContext *scratch_clang_ast_context = m_target->GetScratchClangASTContext();

which had the side effect of deleting this very ClangASTSource instance. Not good.
Change it to

// We are in the process of destruction, don't create clang ast context on demand
// by passing false to Target::GetScratchClangASTContext(create_on_demand).
ClangASTContext *scratch_clang_ast_context = m_target->GetScratchClangASTContext(false);

The Target::GetScratchClangASTContext(bool create_on_demand=true) has a new signature.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145537 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
673f3dbea64b116166dfa668006cdc84224a27c0 30-Nov-2011 Sean Callanan <scallanan@apple.com> Added support to the Objective-C language runtime
to find Objective-C class types by looking in the
symbol tables for the individual object files.

I did this as follows:

- I added code to SymbolFileSymtab that vends
Clang types for symbols matching the pattern
"_OBJC_CLASS_$_NSMyClassName," making them
appear as Objective-C classes. This only occurs
in modules that do not have debug information,
since otherwise SymbolFileDWARF would be in
charge of looking up types.

- I made a new SymbolVendor subclass for the
Apple Objective-C runtime that is in charge of
making global lookups of Objective-C types. It
currently just sends out type lookup requests to
the appropriate SymbolFiles, but in the future we
will probably extend it to query the runtime more
completely.

I also modified a testcase whose behavior is changed
by the fact that we now actually return an Objective-C
type for __NSCFString.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145526 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
75d8c2591f6c56a09338bf4967a41510165a907e 28-Nov-2011 Greg Clayton <gclayton@apple.com> CommandObjectProcess was recently changed to automatically use the platform
to launch a process for debugging. Since this isn't supported on all platforms,
we need to do what we used to do if this isn't supported. I added:

bool
Platform::CanDebugProcess ();

This will get checked before trying to launch a process for debugging and then
fall back to launching the process through the current host debugger. This
should solve the issue for linux and keep the platform code clean.

Centralized logging code for logging errors, warnings and logs when reporting
things for modules or symbol files. Both lldb_private::Module and
lldb_private::SymbolFile now have the following member functions:

void
LogMessage (Log *log, const char *format, ...);

void
ReportWarning (const char *format, ...);

void
ReportError (const char *format, ...);

These will all output the module name and object (if any) such as:

"error: lldb.so ...."
"warning: my_archive.a(foo.o) ...."

This will keep the output consistent and stop a lot of logging calls from
having to try and output all of the information that uniquely identifies
a module or symbol file. Many places in the code were grabbing the path to the
object file manually and if the module represented a .o file in an archive, we
would see log messages like:

error: foo.a - some error happened



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145219 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
323ce42219c4b036e21212ce7d1398253a91e9db 19-Nov-2011 Jim Ingham <jingham@apple.com> Handle stepping through a trampoline where the jump target is calculated a runtime - and so doesn't match
the name of the PLT entry. This solution assumes a naming convention agreed upon by us and the system folks,
and isn't general. The general solution requires actually finding & calling the resolver function if it
hasn't been called yet. That's more tricky.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144981 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
a9385537809ef342c843c5ab972e513742652047 18-Nov-2011 Greg Clayton <gclayton@apple.com> Added optional calls to lldb_private::Process for getting memory region info
from a process and hooked it up to the new packet that was recently added
to our GDB remote executable named debugserver. Now Process has the following
new calls:

virtual Error
Process::GetMemoryRegionInfo (lldb::addr_t load_addr, MemoryRegionInfo &range_info);

virtual uint32_t
GetLoadAddressPermissions (lldb::addr_t load_addr);

Only the first one needs to be implemented by subclasses that can add this
support.

Cleaned up the way the new packet was implemented in debugserver to be more
useful as an API inside debugserver. Also found an error where finding a region
for an address actually will pick up the next region that follows the address
in the query so we also need ot make sure that the address we requested the
region for falls into the region that gets returned.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144976 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
464c6161464694412b7472129e789248f1cf21b9 17-Nov-2011 Greg Clayton <gclayton@apple.com> Use a pseudoterminal for local processes if no STDIO redirection or other
file actions have been specified.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144922 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ffa43a6bc42bfcccae46eec9cf7bf73f17c328e9 17-Nov-2011 Greg Clayton <gclayton@apple.com> Fixed the issue that was causing our monitor process threads to crash, it
turned out to be unitialized data in the ProcessLaunchInfo default constructor.
Turning on MallocScribble in the environment helped track this down.

When we launch and attach using the host layer, we now inform the process that
it shouldn't detach when by calling an accessor.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144882 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4938bd6ebe7ce788c1fd74cf657a5e4c882d929a 16-Nov-2011 Sean Callanan <scallanan@apple.com> I made the ClangASTImporter owned by the target
rather than individually on behalf of each
ASTContext. This allows the ASTImporter to know
about all containers of types, which will let it
be smarter about forwarding information about
type origins. That means that the following
sequence of steps will be possible (after a few
more changes):

- Import a type from a Module's ASTContext into
an expression parser ASTContext, tracking its
origin information -- this works now.

- Because the result of the expression uses that
type, import it from the expression parser
ASTContext into the Target's scratch AST
context, forwarding the origin information --
this needs to be added.

- For a later expression that uses the result,
import the type from the Target's scratch AST
context, still forwarding origin information
-- this also needs to be added.

- Use the intact origin information to complete
the type as needed -- this works now if the
origin information is present.

To this end, I made the following changes:

- ASTImporter top-level copy functions now
require both a source and a destination AST
context parameter.

- The ASTImporter now knows how to purge
records related to an ASTContext that is
going away.

- The Target now owns and creates the ASTImporter
whenever the main executable changes or (in the
absence of a main executable) on demand.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144802 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
1c4642c6ab741d85c98d4288cf922c9a2ef77007 16-Nov-2011 Greg Clayton <gclayton@apple.com> Made the darwin host layer properly reap any child processes that it spawns.
After recent changes we weren't reaping child processes resulting in many
zombie processes.

This was fixed by adding more settings to the ProcessLaunchOptions class
that allow clients to specify a callback function and baton to be notified
when their process dies. If one is not supplied a default callback will be
used that "does the right thing".

Cleaned up a race condition in the ProcessGDBRemote class that would attempt
to monitor when debugserver died.

Added an extra boolean to the process monitor callbacks that indicate if a
process exited or not. If your process exited with a zero exit status and no
signal, both items could be zero.

Modified the process monitor functions to not require a callback function
in order to reap the child process.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144780 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
e0b7f94a82aee489f221a3b3f995bce1cbb34e23 16-Nov-2011 Sean Callanan <scallanan@apple.com> Fixed a problem where the target didn't use a
NULL-terminated C string to store the contents
of the expression prefix file. This meant that
expressions, when printing the contents of the
prefix into the expression's text, would
invariably put in bad data after the end of the
expression.

Now, instead, we store the prefix contents in a
std::string, which handles null-termination
correctly.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144760 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
dcf03f82c67033cd72925a050768498fa367249b 15-Nov-2011 Sean Callanan <scallanan@apple.com> Made Target own a ClangASTSource that will be used
to complete types in the scratch AST context.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144712 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
527154d8e532f27f25af226c9e1dac607c48b5d1 15-Nov-2011 Greg Clayton <gclayton@apple.com> Added a new class to Process.h: ProcessAttachInfo. This class contains enough
info for us to attach by pid, or by name and will also allow us to eventually
do a lot more powerful attaches. If you look at the options for the "platform
process list" command, there are many options which we should be able to
specify. This will allow us to do things like "attach to a process named 'tcsh'
that has a parent process ID of 123", or "attach to a process named 'x' which
has an effective user ID of 345".

I finished up the --shell implementation so that it can be used without the
--tty option in "process launch". The "--shell" option now can take an
optional argument which is the path to the shell to use (or a partial name
like "sh" which we will find using the current PATH environment variable).

Modified the Process::Attach to use the new ProcessAttachInfo as the sole
argument and centralized a lot of code that was in the "process attach"
Execute function so that everyone can take advantage of the powerful new
attach functionality.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144615 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
bd06ff435614ff4e884c40f3ea13e24f0cef96f7 13-Nov-2011 Greg Clayton <gclayton@apple.com> <rdar://problem/10103980>

A long time ago we started to centralized the STDOUT in lldb_private::Process
but we missed a few things still in ProcessGDBRemote.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144491 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
2d9adb73af7520bec430e0585ca40467828e6ed1 12-Nov-2011 Greg Clayton <gclayton@apple.com> Added the ability to run a process in a shell on MacOSX currently when using
the --tty option. So you can now get shell expansion and file redirection:

(lldb) process launch --tty --shell -- *.jpg < in.txt > out.txt

Again, the "--tty" is mandatory for now until we hook this up to other
functions. The shell is also currently hard coded to "/bin/bash" and not the
"SHELL" variable. "/bin/tcsh" was causing problems which I need to dig into.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144443 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
6db3594f1ce91d8268ef60bf5d07635d778ea786 10-Nov-2011 Jim Ingham <jingham@apple.com> Using the wrong type for the break id's (user_id_t is an unsigned int, but internal breakpoints can be negative, and anyway it is a good idea to use break_id_t for breakpoints, no?)

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144254 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanRunToAddress.h
0296fe73a7cb1482226b1303a795ede00e12d677 08-Nov-2011 Jim Ingham <jingham@apple.com> Do a better job of detecting when a breakpoint command has set the target running again (except you have to ignore
cases where the breakpoint runs expressions, those don't count as really "running again").


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144064 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
abb3302051246273eb92cca203c9a1b9d9736e05 08-Nov-2011 Greg Clayton <gclayton@apple.com> Moved many of the "settings" that used to be in "target.process.*" to just
be in the target. All of the environment, args, stdin/out/err files, etc have
all been moved. Also re-enabled the ability to launch a process in a separate
terminal on MacOSX.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@144061 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
07c51d09d4b61891cdc37f44bb332dc286b4de2f 04-Nov-2011 Benjamin Kramer <benny.kra@googlemail.com> Include limits.h for PATH_MAX.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@143694 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
36bc5ea5a48c19421d44f559e2165c105657b809 03-Nov-2011 Greg Clayton <gclayton@apple.com> Modified all Process::Launch() calls to use a ProcessLaunchInfo structure
on internal only (public API hasn't changed) to simplify the paramter list
to the launch calls down into just one argument. Also all of the argument,
envronment and stdio things are now handled in a much more centralized fashion.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@143656 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
ba560cc7d03c9f7d9df81e60201c5ec75cff5232 01-Nov-2011 Jim Ingham <jingham@apple.com> Enhanced the ObjC DynamicCheckerFunction to test for "object responds to selector" as well as
"object borked"... Also made the error when the checker fails reflect this fact rather than
report a crash at 0x0.

Also a little cleanup:
- StopInfoMachException had a redundant copy of the description string.
- ThreadPlanCallFunction had a redundant copy of the thread, and had a
copy of the process that it didn't really need.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@143419 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
hreadPlanCallUserExpression.h
705a098b207440d81ea4e4ce66ebf1398ec458a3 31-Oct-2011 Daniel Dunbar <daniel@zuster.org> warnings: Fix up several const qualified return types.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@143379 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
7089d8a3ef19ea251210b3e9bf198da8fb55f279 29-Oct-2011 Jim Ingham <jingham@apple.com> Added the ability for the target to specify Modules that will not be searched
when setting breakpoints, but only if no module is specified. The Darwin
platform uses this to not set breakpoints in dyld.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@143249 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
arget.h
591cf15899706efe8878a0718daec056e1ffd442 21-Oct-2011 Jim Ingham <jingham@apple.com> Lock the Unwinder before accessing it.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142632 91177308-0d34-0410-b5e6-96231b3b80d8
nwind.h
444e35b5fdf15a25a427285650f06f1390e62c75 19-Oct-2011 Greg Clayton <gclayton@apple.com> Moved lldb::user_id_t values to be 64 bit. This was going to be needed for
process IDs, and thread IDs, but was mainly needed for for the UserID's for
Types so that DWARF with debug map can work flawlessly. With DWARF in .o files
the type ID was the DIE offset in the DWARF for the .o file which is not
unique across all .o files, so now the SymbolFileDWARFDebugMap class will
make the .o file index part (the high 32 bits) of the unique type identifier
so it can uniquely identify the types.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142534 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
43d390617a5a03ff42894fa0ad121b9335fa4dbc 15-Oct-2011 Jim Ingham <jingham@apple.com> Make "next" and "step-out" work when in stepping over or out of inlined functions.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142031 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepOut.h
76e55f722acc41f6eaf35a7f988090f97b2c82e0 15-Oct-2011 Jim Ingham <jingham@apple.com> Make the step range plans capable of supporting multiple ranges. Also make their constructors public, there isn't any good reason why you shouldn't be able to make these plans.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142026 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
ecd4feb5111432d2878e95461220c720cb2d24c8 14-Oct-2011 Johnny Chen <johnny.chen@apple.com> SBValue::Watch() and SBValue::WatchPointee() are now the official API for creating
a watchpoint for either the variable encapsulated by SBValue (Watch) or the pointee
encapsulated by SBValue (WatchPointee).

Removed SBFrame::WatchValue() and SBFrame::WatchLocation() API as a result of that.

Modified the watchpoint related test suite to reflect the change.

Plus replacing WatchpointLocation with Watchpoint throughout the code base.

There are still cleanups to be dome. This patch passes the whole test suite.
Check it in so that we aggressively catch regressions.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141925 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
659758ac74ae47e3237cc38dd56e5efae2261b25 08-Oct-2011 Jim Ingham <jingham@apple.com> Remove some commented out code.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141431 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepRange.h
8b7b2276132c7353cabd22000287b42badc26613 08-Oct-2011 Jim Ingham <jingham@apple.com> Move the responsibility for translating the various eFunctionNameType lookups to the
SymbolFIle (it was done mostly in the BreakpointResolverName resolver before.) Then
tailor our searches to the way the indexed maps are laid out. This removes a bunch
of test case failures using indexed dSYM's.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141428 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
bjCLanguageRuntime.h
e14cf4e7dc9d561224f744807b70a8ab91a8b36d 05-Oct-2011 Johnny Chen <johnny.chen@apple.com> Add capability to set ignore count for watchpoint on the command line:

watchpoint ignore -i <count> [<watchpt-id | watchpt-id-list>]

Add tests of watchpoint ignore_count for command line as well as API.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141217 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
5eb54bb63835eb01b200223503b5fd89a7557dd5 27-Sep-2011 Johnny Chen <johnny.chen@apple.com> Add SBTarget::GetLastCreatedWatchpointLocation() API and export to the Python interface.
Also add rich comparison methods (__eq__ and __ne__) for SBWatchpointLocation.
Modify TestWatchpointLocationIter.py to exercise the new APIs.

Add fuzz testings for the recently added SBTarget APIs related to watchpoint manipulations.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140633 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
3e8c25f62f92145b6fb699b379cbfe72b1245d4a 24-Sep-2011 Greg Clayton <gclayton@apple.com> Added to the public API to allow symbolication:
- New SBSection objects that are object file sections which can be accessed
through the SBModule classes. You can get the number of sections, get a
section at index, and find a section by name.
- SBSections can contain subsections (first find "__TEXT" on darwin, then
us the resulting SBSection to find "__text" sub section).
- Set load addresses for a SBSection in the SBTarget interface
- Set the load addresses of all SBSection in a SBModule in the SBTarget interface
- Add a new module the an existing target in the SBTarget interface
- Get a SBSection from a SBAddress object

This should get us a lot closer to being able to symbolicate using LLDB through
the public API.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140437 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
argetList.h
c86582f4095d146c4177b0ed7f79c923269deca5 23-Sep-2011 Johnny Chen <johnny.chen@apple.com> Add a (bool)end_to_end parameter, default true, to the Target::Remove/Disable/EnableALLWatchpointLocations()
methods. If passed as false, it signifies that only the debugger side is affected.

Modify Target::DeleteCurrentProcess() to use DisableAllWatchpointLocations(false) to
disable the watchpoint locations, instead of removing them between process instances.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140418 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
d6d47976b71187907c1cdeea86fabf7d5534314f 23-Sep-2011 Jim Ingham <jingham@apple.com> Added the ability to restrict breakpoints by function name, function regexp, selector
etc to specific source files.
Added SB API's to specify these source files & also more than one module.
Added an "exact" option to CompileUnit's FindLineEntry API.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140362 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
567e7f3ba16eb48cb9fd6a2f26f2f7269eb6983c 22-Sep-2011 Greg Clayton <gclayton@apple.com> Converted the lldb_private::Process over to use the intrusive
shared pointers.

Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.

Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.

Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140298 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
rocess.h
043f8c230739ceab194257a617731ecd28e1a912 22-Sep-2011 Johnny Chen <johnny.chen@apple.com> StopInfoWatchpoint should override the StopInfo::ShouldStop() virtual method and delegate to
the WatchpointLocation object to check whether it should stop and allow it to update the hit
count, among other bookkeepings.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140279 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
03c8ee5aeafcd6c43f10002a4f8096af01780f86 21-Sep-2011 Jim Ingham <jingham@apple.com> Add a new breakpoint type "break by source regular expression".
Fix the RegularExpression class so it has a real copy constructor.
Fix the breakpoint setting with multiple shared libraries so it makes
one breakpoint not one per shared library.
Add SBFileSpecList, to be used to expose the above to the SB interface (not done yet.)


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140225 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
da5a80217ec4b4f23cecfc81264faeb1bda4e547 21-Sep-2011 Johnny Chen <johnny.chen@apple.com> Add some watchpoint maintenance methods to the Target class.
Plus some minor changes to the WatchpointLocationList and WatchpointLocation classes.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140211 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
6cf6c474742a23e7cb6b4f618bf1de711db90a85 21-Sep-2011 Sean Callanan <scallanan@apple.com> Fixed a problem where expressions would attempt to
allocate memory in a process that did not support
expression execution. Also improved detection of
whether or not a process can execute expressions.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140202 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
987c7ebe1daa425ba7abfa9643800e3237146fc0 17-Sep-2011 Greg Clayton <gclayton@apple.com> Adopt the intrusive pointers in:

lldb_private::Breakpoint
lldb_private::BreakpointLocations
lldb_private::BreakpointSite
lldb_private::Debugger
lldb_private::StackFrame
lldb_private::Thread
lldb_private::Target



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139985 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
arget.h
hread.h
hreadPlanTestCondition.h
dbcf98c194742f911c963854084c66aa49a5e513 15-Sep-2011 Jim Ingham <jingham@apple.com> Track whether a process was Launched or Attached to. If Attached, the detach when the debugger is destroyed, rather than killing the process. Also added a Debugger::Clear, which gets called in Debugger::Destroy to deal with all the targets in the Debugger. Also made the Driver's main loop call Destroy on the debugger, rather than just Destroying the currently selected Target's process.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139852 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
47dc457387b690c5e4df1c0c7dd8c4337b92e630 15-Sep-2011 Sean Callanan <scallanan@apple.com> This patch modifies the expression parser to allow it
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.

This modification touches the following files:

lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.

Target.[h,cpp]
Have EvaluateExpression now accept the new enum.

ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.

ClangFunction.[cpp,h]
Add support for the new enum.

IRInterpreter.[cpp,h]
New implementation.

ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.

ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.

ClangUtilityFunction.[cpp,h]
Add support for the new enum.

ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.

IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.

IRToDWARF.cpp
Removed

CommandObjectExpression.cpp
Remove references to the obsolete -i option.

Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)

SBValue.cpp
Add support for the new enum.

SBFrame.cpp
Add support for he new enum.

BreakpointOptions.cpp
Add support for the new enum.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139772 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
34bbf85e60949752de9c8272a70d59383e523cc5 13-Sep-2011 Johnny Chen <johnny.chen@apple.com> Watchpoint WIP:

o Rename from OptionGroupWatchpoint::WatchMode to OptionGroupWatchpoint::WatchType,
and CommandArgumentType::eArgTypeWatchMode to CommandArgumentType::eArgTypeWatchType.
Update the sources to reflect the change.

o Add a CreateWatchpointLocation() method to Target class, which is currently not implmeneted
(returns an empty WatchpointLocationSP object). Add logic to CommandObjectFrame::Execute()
to exercise the added API for creating a watchpoint location.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139560 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
fdf24efe672bf3fa041cdbebd2d7f406b11882bd 09-Sep-2011 Jim Ingham <jingham@apple.com> Move the SourceManager from the Debugger to the Target. That way it can store the per-Target default Source File & Line.
Set the default Source File & line to main (if it can be found.) at startup. Selecting the current thread & or frame resets
the current source file & line, and "source list" as well as the breakpoint command "break set -l <NUM>" will use the
current source file.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139323 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
tackFrameList.h
arget.h
hread.h
30e8d97af7d9d398da889337a11e9bcb552ebc3e 08-Sep-2011 Johnny Chen <johnny.chen@apple.com> Watchpoint WIP: on the debugger side, create an instance of either
StopInfoTrace or StopInfoWatchpoint based on the exc_sub_code, as well.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139315 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
9a3c2a58db644dc93915f938cb4c99558e41966c 06-Sep-2011 Johnny Chen <johnny.chen@apple.com> Add a data type WatchpointLocationList to the repository. A Target contains an instance of watchpoint location list.
Also add a typefed for WatchpointLocationSP to lldb-forward-rtti.h.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139166 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
915448044bac6fdac22a33cc46697dcb771a8df2 06-Sep-2011 Enrico Granata <granata.enrico@gmail.com> Redesign of the interaction between Python and frozen objects:
- introduced two new classes ValueObjectConstResultChild and ValueObjectConstResultImpl: the first one is a ValueObjectChild obtained from
a ValueObjectConstResult, the second is a common implementation backend for VOCR and VOCRCh of method calls meant to read through pointers stored
in frozen objects ; now such reads transparently move from host to target as required
- as a consequence of the above, removed code that made target-memory copies of expression results in several places throughout LLDB, and also
removed code that enabled to recognize an expression result VO as such
- introduced a new GetPointeeData() method in ValueObject that lets you read a given amount of objects of type T from a VO
representing a T* or T[], and doing dereferences transparently
in private layer it returns a DataExtractor ; in public layer it returns an instance of a newly created lldb::SBData
- as GetPointeeData() does the right thing for both frozen and non-frozen ValueObject's, reimplemented ReadPointedString() to use it
en lieu of doing the raw read itself
- introduced a new GetData() method in ValueObject that lets you get a copy of the data that backs the ValueObject (for pointers,
this returns the address without any previous dereferencing steps ; for arrays it actually reads the whole chunk of memory)
in public layer this returns an SBData, just like GetPointeeData()
- introduced a new CreateValueFromData() method in SBValue that lets you create a new SBValue from a chunk of data wrapped in an SBData
the limitation to remember for this kind of SBValue is that they have no address: extracting the address-of for these objects (with any
of GetAddress(), GetLoadAddress() and AddressOf()) will return invalid values
- added several tests to check that "p"-ing objects (STL classes, char* and char[]) will do the right thing
Solved a bug where global pointers to global variables were not dereferenced correctly for display
New target setting "max-string-summary-length" gives the maximum number of characters to show in a string when summarizing it, instead of the hardcoded 128
Solved a bug where the summary for char[] and char* would not be shown if the ValueObject's were dumped via the "p" command
Removed m_pointers_point_to_load_addrs from ValueObject. Introduced a new m_address_type_of_children, which each ValueObject can set to tell the address type
of any pointers and/or references it creates. In the current codebase, this is load address most of the time (the only notable exception being file
addresses that generate file address children UNLESS we have a live process)
Updated help text for summary-string
Fixed an issue in STL formatters where std::stlcontainer::iterator would match the container's synthetic children providers
Edited the syntax and help for some commands to have proper argument types


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139160 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
23967773eda67ca32904b15cc80e556dd38266a8 25-Aug-2011 Johnny Chen <johnny.chen@apple.com> Make ThreadList::GetSelectedThread() select and return the 0th thread if there's no
currently selected thread. And update the call sites accordingly.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@138577 91177308-0d34-0410-b5e6-96231b3b80d8
hreadList.h
caf798c28b23aeee54279366f46e5dee8799c558 23-Aug-2011 Enrico Granata <granata.enrico@gmail.com> Fixing commas in enums (build breaker on GCC) as reported by Filipe Cabecinhas

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@138385 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
37f962e785be99dc4f0c5e9d02416992ff03bbd0 22-Aug-2011 Greg Clayton <gclayton@apple.com> Added a new plug-in type: lldb_private::OperatingSystem. The operating system
plug-ins are add on plug-ins for the lldb_private::Process class that can add
thread contexts that are read from memory. It is common in kernels to have
a lot of threads that are not currently executing on any cores (JTAG debugging
also follows this sort of thing) and are context switched out whose state is
stored in memory data structures. Clients can now subclass the OperatingSystem
plug-ins and then make sure their Create functions correcltly only enable
themselves when the right binary/target triple are being debugged. The
operating system plug-ins get a chance to attach themselves to processes just
after launching or attaching and are given a lldb_private::Process object
pointer which can be inspected to see if the main executable, target triple,
or any shared libraries match a case where the OS plug-in should be used.
Currently the OS plug-ins can create new threads, define the register contexts
for these threads (which can all be different if desired), and populate and
manage the thread info (stop reason, registers in the register context) as
the debug session goes on.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@138228 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
peratingSystem.h
rocess.h
hread.h
hreadList.h
6f30287bdc836c715fcac75b06ec58d13b79e715 19-Aug-2011 Enrico Granata <granata.enrico@gmail.com> - Now using ${var} as the summary for an aggregate type will produce "name-of-type @ object-location" instead of giving an error
e.g. you may get "foo_class @ 0x123456" when typing "type summary add -f ${var} foo_class"
- Added a new special formatting token %T for summaries. This shows the type of the object.
Using it, the new "type @ location" summary could be manually generated by writing ${var%T} @ ${var%L}
- Bits and pieces required to support "frame variable array[n-m]"
The feature is not enabled yet because some additional design and support code is required, but the basics
are getting there
- Fixed a potential issue where a ValueObjectSyntheticFilter was not holding on to its SyntheticChildrenSP
Because of the way VOSF are being built now, this has never been an actual issue, but it is still sensible for
a VOSF to hold on to the SyntheticChildrenSP as well as to its FrontEnd


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@138080 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
19030d8e5545e0edbd59d8e44a16a11728089afa 15-Aug-2011 Enrico Granata <granata.enrico@gmail.com> Refactoring of ValueObject::DumpValueObject and 'frame variable', 'target variable' commands to use an Options object instead of passing an ever-increasing number of arguments to the DumpValueObject() method, with the ultimate aim of making that call private implementation

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137622 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
3ad4da0f2c2afdea3352deaaf9c044855dc5c95b 15-Aug-2011 Jim Ingham <jingham@apple.com> Factor out the code that parses ObjC Method names into a static method
in ObjCLanguageRuntime.
Add the category-free name of symbols to the Symtab name-to-index list.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137600 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
c51ffbf896e398ada5f7e89b2fa5aec6f2224f09 12-Aug-2011 Greg Clayton <gclayton@apple.com> We were leaking a stack frame in StackFrameList in Thread.cpp which could
cause extra shared pointer references to one or more modules to be leaked.
This would cause many object files to stay around the life of LLDB, so after
a recompile and rexecution, we would keep adding more and more memory. After
fixing the leak, we found many cases where leaked stack frames were still
being used and causing crashes in the test suite. These are now all resolved.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137516 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanTracer.h
018921dd162d818e71cf1ac86d03422e88f0a674 12-Aug-2011 Enrico Granata <granata.enrico@gmail.com> *Some more optimizations in usage of ConstString
*New setting target.max-children-count gives an upper-bound to the number of child objects that will be displayed at each depth-level
This might be a breaking change in some scenarios. To override the new limit you can use the --show-all-children (-A) option
to frame variable or increase the limit in your lldbinit file
*Command "type synthetic" has been split in two:
- "type synthetic" now only handles Python synthetic children providers
- the new command "type filter" handles filters
Because filters and synthetic providers are both ways to replace the children of a ValueObject, only one can be effective at any given time.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137416 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
f2bf870da5819415d52bc7da98c151cedf1e6dff 11-Aug-2011 Greg Clayton <gclayton@apple.com> Patch for "process load" by Filipe Cabecinhas.

Filipe was attempting to do a:

(lldb) process load ~/path/foo.dylib

But the process load command wasn't resolving the path. We have to be careful
about resolving the path here because we want to do it in terms of the platform
we are using. the "~/" can mean a completely different path if you are remotely
debugging on another machine as another user. So to support this, platforms now
can resolve remote paths:

bool
Platform::ResolveRemotePath (const FileSpec &platform_path,
FileSpec &resolved_platform_path);

The host/local platform will just resolve the path.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137307 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
5beb99d65c72cd4a4f7529c4ff8cc04a1a40769d 11-Aug-2011 Greg Clayton <gclayton@apple.com> Added the ability to remove orphaned module shared pointers from a ModuleList.
This is helping us track down some extra references to ModuleSP objects that
are causing things to get kept around for too long.

Added a module pointer accessor to target and change a lot of code to use
it where it would be more efficient.

"taret delete" can now specify "--clean=1" which will cleanup the global module
list for any orphaned module in the shared module cache which can save memory
and also help track down module reference leaks like we have now.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137294 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
153ccd72f52a6cc3595d7614558e2954f67833eb 10-Aug-2011 Greg Clayton <gclayton@apple.com> While tracking down memory consumption issue a few things were needed: the
ability to dump more information about modules in "target modules list". We
can now dump the shared pointer reference count for modules, the pointer to
the module itself (in case performance tools can help track down who has
references to said pointer), and the modification time.

Added "target delete [target-idx ...]" to be able to delete targets when they
are no longer needed. This will help track down memory usage issues and help
to resolve when module ref counts keep getting incremented. If the command gets
no arguments, the currently selected target will be deleted. If any arguments
are given, they must all be valid target indexes (use the "target list"
command to get the current target indexes).

Took care of a bunch of "no newline at end of file" warnings.

TimeValue objects can now dump their time to a lldb_private::Stream object.

Modified the "target modules list --global" command to not error out if there
are no targets since it doesn't require a target.

Fixed an issue in the MacOSX DYLD dynamic loader plug-in where if a shared
library was updated on disk, we would keep using the older one, even if it was
updated.

Don't allow the ModuleList::GetSharedModule(...) to return an empty module.
Previously we could specify a valid path on disc to a module, and specify an
architecture that wasn't contained in that module and get a shared pointer to
a module that wouldn't be able to return an object file or a symbol file. We
now make sure an object file can be extracted prior to adding the shared pointer
to the module to get added to the shared list.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137196 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
21f37ad875d4f50d1b4b3d307e120f6d27103730 09-Aug-2011 Jim Ingham <jingham@apple.com> Move the handling of breakpoint conditions from the Private event loop to the StopInfoBreakpoint::DoActions, which happens as the
event is removed. Also use the return value of asynchronous breakpoint callbacks, they get checked before, and override the
breakpoint conditions.

Added ProcessModInfo class, to unify "stop_id generation" and "memory modification generation", and use where needed.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137102 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
f669850b51f3898020cbae8fdfd17faf4f18ba02 09-Aug-2011 Enrico Granata <granata.enrico@gmail.com> Basic support for reading synthetic children by index:
if your datatype provides synthetic children, "frame variable object[index]" should now do the right thing
in cases where the above syntax would have been rejected before, i.e.
object is not a pointer nor an array (frame variable ignores potential overload of [])
object is a pointer to an Objective-C class (which cannot be dereferenced)
expression will still run operator[] if available and complain if it cannot do so
synthetic children by name do not work yet


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@137097 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
6e2d2823b1bfa4e6a57996391696ba25a2dd069b 03-Aug-2011 Greg Clayton <gclayton@apple.com> Fixed an issue where StackFrame::GetValueForVariableExpressionPath(...)
was previously using the entire frame variable list instead of using the
in scope variable list. I added a new function to a stack frame:

lldb::VariableListSP
StackFrame::GetInScopeVariableList (bool get_file_globals);

This gets only variables that are in scope and they will be ordered such
that the variables from the current scope are first.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@136745 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
afb7c85df796f74262917e44dd68f668dade3911 02-Aug-2011 Enrico Granata <granata.enrico@gmail.com> Fixed a bug where a variable could not be formatted in a summary if its datatype already had a custom format
Fixed a bug where Objective-C variables coming out of the expression parser could crash the Python synthetic providers:
- expression parser output has a "frozen data" component, which is a byte-exact copy of the value (in host memory),
if trying to read into memory based on the host address, LLDB would crash. we are now passing the correct (target)
pointer to the Python code
Objective-C "id" variables are now formatted according to their dynamic type, if the -d option to frame variable is used:
- Code based on the Objective-C 2.0 runtime is used to obtain this information without running code on the target


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@136695 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
2bc9eb3ba78efc64a273729b480bafc3bbaa433a 19-Jul-2011 Johnny Chen <johnny.chen@apple.com> Patch by Matt Johnson to silence G++ warnings!
Used hand merge to apply the diffs. I did not apply the diffs for FormatManager.h and
the diffs for memberwise initialization for ValueObject.cpp because they changed since.
I will ask my colleague to apply them later.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@135508 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
8d2ea2888a4acb7f140f9af64ddd2b16b2dee870 17-Jul-2011 Greg Clayton <gclayton@apple.com> Added a boolean to the pure virtual lldb_private::Process::CanDebug(...)
method so process plug-ins that are requested by name can answer yes when
asked if they can debug a target that might not have any file in the target.

Modified the ConnectionFileDescriptor to have both a read and a write file
descriptor. This allows us to support UDP, and eventually will allow us to
support pipes. The ConnectionFileDescriptor class also has a file descriptor
type for each of the read and write file decriptors so we can use the correct
read/recv/recvfrom call when reading, or write/send/sendto for writing.

Finished up an initial implementation of UDP where you can use the "udp://"
URL to specify a host and port to connect to:

(lldb) process connect --plugin kdp-remote udp://host:41139

This will cause a ConnectionFileDescriptor to be created that can send UDP
packets to "host:41139", and it will also bind to a localhost port that can
be given out to receive the connectionless UDP reply.

Added the ability to get to the IPv4/IPv6 socket port number from a
ConnectionFileDescriptor instance if either file descriptor is a socket.

The ProcessKDP can now successfully connect to a remote kernel and detach
using the above "processs connect" command!!! So far we have the following
packets working:
KDP_CONNECT
KDP_DISCONNECT
KDP_HOSTINFO
KDP_VERSION
KDP_REATTACH

Now that the packets are working, adding new packets will go very quickly.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@135363 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
7dd98df0d69447d3f42b8044b7cda2c089aea653 12-Jul-2011 Greg Clayton <gclayton@apple.com> Added the ability to _not_ skip the prologue when settings breakpoints
by name by adding an extra parameter to the lldb_private::Target breakpoint
setting functions.

Added a function in the DWARF symbol file plug-in that can dump errors
and prints out which DWARF file the error is happening in so we can track
down what used to be assertions easily.

Fixed the MacOSX kernel plug-in to properly read the kext images and set
the kext breakpoint to watch for kexts as they are loaded.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@134990 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
f9ce9b8460a3604ba05cf2a8c50d878fe0baf9eb 09-Jul-2011 Greg Clayton <gclayton@apple.com> Fixed some const issues with args to some lldb_private::Target functions.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@134826 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
bbea13375ec4ae876576fcb8608626d45880dd96 08-Jul-2011 Greg Clayton <gclayton@apple.com> Added the start of the darwin dynamic loader plug-in. It isn't hooked up to
be detected yet, but most of the initial code is there and needs to be
debugged more.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@134672 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
801417e453f8531ac176cd952200587bf15d9ccf 07-Jul-2011 Greg Clayton <gclayton@apple.com> Added "target variable" command that allows introspection of global
variables prior to running your binary. Zero filled sections now get
section data correctly filled with zeroes when Target::ReadMemory
reads from the object file section data.

Added new option groups and option values for file lists. I still need
to hook up all of the options to "target variable" to allow more complete
introspection by file and shlib.

Added the ability for ValueObjectVariable objects to be created with
only the target as the execution context. This allows them to be read
from the object files through Target::ReadMemory(...).

Added a "virtual Module * GetModule()" function to the ValueObject
class. By default it will look to the parent variable object and
return its module. The module is needed when we have global variables
that have file addresses (virtual addresses that are specific to
module object files) and in turn allows global variables to be displayed
prior to running.

Removed all of the unused proxy object support that bit rotted in
lldb_private::Value.

Replaced a lot of places that used "FileSpec::Compare (lhs, rhs) == 0" code
with the more efficient "FileSpec::Equal (lhs, rhs)".

Improved logging in GDB remote plug-in.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@134579 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
107e53da8bdca540db8b734ed237688eaeee85c5 06-Jul-2011 Greg Clayton <gclayton@apple.com> Fixed some issues with ARM backtraces by not processing any push/pop
instructions if they are conditional. Also fixed issues where the PC wasn't
getting bit zero stripped for ARM targets when a stack frame was thumb. We
now properly call through the GetOpcodeLoadAddress() functions to make sure
the addresses are properly stripped for any targets that may decorate up
their addresses.

We now don't pass the SIGSTOP signals along. We can revisit this soon, but
currently this was interfering with debugging some older ARM targets that
don't have vCont support in the GDB server.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@134461 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
58513667f6765aa8db13cdc4abd500340c1cac80 25-Jun-2011 Jim Ingham <jingham@apple.com> Add support for looking up ivar offset from the ObjC runtime.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@133831 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
e6bd142d9fa7ed149bd37efd8a75637375f165b7 20-Jun-2011 Jim Ingham <jingham@apple.com> Use the dyld_mode, image_infos & image_infos_count passed into the shared library notification function
to update libraries rather than reading the whole all_imaage_infos structure every time we get notified.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@133448 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
604f0d336f0d9390a0405022ef660ae922ef29bf 17-Jun-2011 Greg Clayton <gclayton@apple.com> Added the notion of an system root for SDKs. This is a directory where all
libraries and headers exist. This can be specified using the platform select
function:

platform select --sysroot /Volumes/remote-root remote-macosx

Each platform subclass is free to interpret the sysroot as needed.

Expose the new SDK root directory through the SBDebugger class.

Fixed an issue with the GDB remote protocol where unimplemented packets were
not being handled correctly.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@133231 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
6561155acc9dee660de73e4aa8215839a06f01a7 04-Jun-2011 Greg Clayton <gclayton@apple.com> Created a std::string in the base StopInfo class for the description and
cleaned up all base classes that had their own copy. Added a SetDescription
accessor to the StopInfo class.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@132615 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
e426d855032b9b1962b98028b42e3a4e88975b03 03-Jun-2011 Peter Collingbourne <peter@pcc.me.uk> Move SaveFrameZeroState and RestoreSaveFrameZero implementations to Thread base class

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@132586 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
54b38413f62af3bcaeb8802a978cc621c8e88eb1 25-May-2011 Greg Clayton <gclayton@apple.com> ABI plug-ins must implement the following pure virtual functions:

virtual bool
ABI::StackUsesFrames () = 0;

Should return true if your ABI uses frames when doing stack backtraces. This
means a frame pointer is used that points to the previous stack frame in some
way or another.

virtual bool
ABI::CallFrameAddressIsValid (lldb::addr_t cfa) = 0;

Should take a look at a call frame address (CFA) which is just the stack
pointer value upon entry to a function. ABIs usually impose alignment
restrictions (4, 8 or 16 byte aligned), and zero is usually not allowed.
This function should return true if "cfa" is valid call frame address for
the ABI, and false otherwise. This is used by the generic stack frame unwinding
code to help determine when a stack ends.

virtual bool
ABI::CodeAddressIsValid (lldb::addr_t pc) = 0;

Validates a possible PC value and returns true if an opcode can be at "pc".
Some ABIs or architectures have fixed width instructions and must be aligned
to a 2 or 4 byte boundary. "pc" can be an opcode or a callable address which
means the load address might be decorated with extra bits (such as bit zero
to indicate a thumb function call for ARM targets), so take this into account
when returning true or false. The address should also be validated to ensure
it is a valid address for the address size of the inferior process. 32 bit
targets should make sure the address is less than UINT32_MAX.

Modified UnwindLLDB to use the new ABI functions to help it properly terminate
stacks.


Modified the mach-o function that extracts dependent files to not resolve the
path as the paths inside a binary might not match those on the current
host system.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@132021 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
c0fa53324d62a48257c092a3347d6e7236aa3152 23-May-2011 Greg Clayton <gclayton@apple.com> Added new lldb_private::Process memory read/write functions to stop a bunch
of duplicated code from appearing all over LLDB:

lldb::addr_t
Process::ReadPointerFromMemory (lldb::addr_t vm_addr, Error &error);

bool
Process::WritePointerToMemory (lldb::addr_t vm_addr, lldb::addr_t ptr_value, Error &error);

size_t
Process::ReadScalarIntegerFromMemory (lldb::addr_t addr, uint32_t byte_size, bool is_signed, Scalar &scalar, Error &error);

size_t
Process::WriteScalarToMemory (lldb::addr_t vm_addr, const Scalar &scalar, uint32_t size, Error &error);

in lldb_private::Process the following functions were renamed:

From:
uint64_t
Process::ReadUnsignedInteger (lldb::addr_t load_addr,
size_t byte_size,
Error &error);

To:
uint64_t
Process::ReadUnsignedIntegerFromMemory (lldb::addr_t load_addr,
size_t byte_size,
uint64_t fail_value,
Error &error);

Cleaned up a lot of code that was manually doing what the above functions do
to use the functions listed above.

Added the ability to get a scalar value as a buffer that can be written down
to a process (byte swapping the Scalar value if needed):

uint32_t
Scalar::GetAsMemoryData (void *dst,
uint32_t dst_len,
lldb::ByteOrder dst_byte_order,
Error &error) const;

The "dst_len" can be smaller that the size of the scalar and the least
significant bytes will be written. "dst_len" can also be larger and the
most significant bytes will be padded with zeroes.

Centralized the code that adds or removes address bits for callable and opcode
addresses into lldb_private::Target:

lldb::addr_t
Target::GetCallableLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;

lldb::addr_t
Target::GetOpcodeLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;

All necessary lldb_private::Address functions now use the target versions so
changes should only need to happen in one place if anything needs updating.

Fixed up a lot of places that were calling :

addr_t
Address::GetLoadAddress(Target*);

to call the Address::GetCallableLoadAddress() or Address::GetOpcodeLoadAddress()
as needed. There were many places in the breakpoint code where things could
go wrong for ARM if these weren't used.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131878 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hreadPlanRunToAddress.h
6cf4d2b31bf208cd6e48d4e37af671ab9b451446 22-May-2011 Jim Ingham <jingham@apple.com> Change the m_update_state to an int, and only trigger the "on removal"
action the second time the event is removed (the first is the internal ->
external transition, the second when it is pulled off the public event
queue, and further times when it is put back because we are faking a
stop reason to hide the expression evaluation stops.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131869 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b9e8f6e7a374d9313f89193e90ae41ef91712e5b 18-May-2011 Greg Clayton <gclayton@apple.com> Added a way to resolve an load address from a target:

bool
Address::SetLoadAddress (lldb::addr_t load_addr, Target *target);

Added an == and != operator to RegisterValue.

Modified the ThreadPlanTracer to use RegisterValue objects to store the
register values when single stepping. Also modified the output to be a bit
less wide.

Fixed the ABIMacOSX_arm to not overwrite stuff on the stack. Also made the
trivial function call be able to set the ARM/Thumbness of the target
correctly, and also sets the return value ARM/Thumbness.

Fixed the encoding on the arm s0-s31 and d16 - d31 registers when the default
register set from a standard GDB server register sets.







git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131517 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hreadPlanTracer.h
613b8739a4d489b7f1c571288d5786768c024205 17-May-2011 Greg Clayton <gclayton@apple.com> Added an allocated memory cache to avoid having to allocate memory over and
over when running JITed expressions. The allocated memory cache will cache
allocate memory a page at a time for each permission combination and divvy up
the memory and hand it out in 16 byte increments.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131453 91177308-0d34-0410-b5e6-96231b3b80d8
emory.h
rocess.h
2370a97fe5bea6fa9d82f40bb34d37d3d3bda317 17-May-2011 Jim Ingham <jingham@apple.com> Fix the error message when an expression evaluation is interrupted by a crash/breakpoint hit to
give the reason for the interrupt. Also make sure it we don't want to unwind from the evaluation
we print something if it is interrupted.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131448 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
hreadPlanCallFunction.h
2f085c6ca2895663687dca704589478ff040b849 15-May-2011 Greg Clayton <gclayton@apple.com> Added the ability to get the return value from a ThreadPlanCallFunction
thread plan. In order to get the return value, you can call:

void
ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);

This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.

Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.

Added the ability to call functions with 6 argument in the x86_64 ABI.

Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory
("_M") or deallocate ("_m") if we find they aren't supported.

Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...)
to be able to deal with the allocate and deallocate memory packets not being
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our
trivial function call support.

Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore
the qHostInfo triple information if any was specified in the target. Currently
if the target only specifies an architecture when creating the target:

(lldb) target create --arch i386 a.out

Then the vendor, os and environemnt will be adopted by the target.

If the target was created with any triple that specifies more than the arch:

(lldb) target create --arch i386-unknown-unknown a.out

Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.

Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131370 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
hreadPlanCallFunction.h
989816b9505219cd67ce044d655c54ac86ecf64b 14-May-2011 Greg Clayton <gclayton@apple.com> Expand the ABI prepare trivial function call to allow 6 simple args.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131334 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hreadPlanCallFunction.h
61d4f7adb6936a6d406dd5b20452d0843e538d76 12-May-2011 Greg Clayton <gclayton@apple.com> Cleaned up the ABI::PrepareTrivialCall() function to take three argument
pointers:

virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t *arg1_ptr,
lldb::addr_t *arg2_ptr,
lldb::addr_t *arg3_ptr) const = 0;

Prior to this it was:

virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t arg,
lldb::addr_t *this_arg,
lldb::addr_t *cmd_arg) const = 0;

This was because the function that called this slowly added more features to
be able to call a C++ member function that might have a "this" pointer, and
then later added "self + cmd" support for objective C. Cleaning this code up
and the code that calls it makes it easier to implement the functions for
new targets.

The MacOSX_arm::PrepareTrivialCall() is now filled in and ready for testing.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131221 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
3613ae1d8bc555d336d3aed9606418d7f714643d 12-May-2011 Jim Ingham <jingham@apple.com> Target::EvaluateExpression should suppress stop hooks.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131219 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
75906e4ec98af3717e415727a8d663a4e246bb4f 11-May-2011 Greg Clayton <gclayton@apple.com> Moved all code from ArchDefaultUnwindPlan and ArchVolatileRegs into their
respective ABI plugins as they were plug-ins that supplied ABI specfic info.

Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.

Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131193 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
rchDefaultUnwindPlan.h
rchVolatileRegs.h
rocess.h
0ddf806dd9e71637846bf0ad46e1b2df7d02cbce 10-May-2011 Sean Callanan <scallanan@apple.com> Fixed a bug in which expression-local variables were
treated as being permanently resident in target
memory. In fact, since the expression's stack frame
is deleted and potentially re-used after the
expression completes, the variables need to be treated
as being freeze-dried.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131104 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
061b79dbf1fefaf157d414747e98a463a0f32eda 09-May-2011 Greg Clayton <gclayton@apple.com> While implementing unwind information using UnwindAssemblyInstEmulation I ran
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:

virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);

virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);

There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue

The new register context calls that subclasses must implement are:

virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0;

virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0;

The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).

All RegiterContext and other sources have been switched over to using the new
regiter value class.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131096 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
10de7d1db3ec782ea2ccda1f39c0a40b9c301594 04-May-2011 Jim Ingham <jingham@apple.com> Change "frame var" over to using OptionGroups (and thus the OptionGroupVariableObjectDisplay).
Change the boolean "use_dynamic" over to a tri-state, no-dynamic, dynamic-w/o running target,
and dynamic with running target.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130832 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
tackFrame.h
arget.h
ef80aabe53b7fdf61309ba6d3d6865c94c681345 02-May-2011 Jim Ingham <jingham@apple.com> Adding support for fetching the Dynamic Value for ObjC Objects.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130701 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
bjCLanguageRuntime.h
888a7334344778d1a4edbd58b5852ae4d53ffed9 26-Apr-2011 Greg Clayton <gclayton@apple.com> Changed the emulate instruction function to take emulate options which
are defined as enumerations. Current bits include:

eEmulateInstructionOptionAutoAdvancePC
eEmulateInstructionOptionIgnoreConditions

Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:

virtual bool
SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;


Where instruction types are defined as:

//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------
typedef enum InstructionType
{
eInstructionTypeAny, // Support for any instructions at all (at least one)
eInstructionTypePrologueEpilogue, // All prologue and epilogue instructons that push and pop register values and modify sp/fp
eInstructionTypePCModifying, // Any instruction that modifies the program counter/instruction pointer
eInstructionTypeAll // All instructions of any kind

} InstructionType;


This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.

Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.

The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.

Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file:

source/Utility/ARM_DWARF_Registers.c

Took some of plug-ins out of the lldb_private namespace.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130189 91177308-0d34-0410-b5e6-96231b3b80d8
rchDefaultUnwindPlan.h
nwindAssembly.h
8badcb2503ed2e2884a48f66099c1d48494817f4 25-Apr-2011 Greg Clayton <gclayton@apple.com> Renamed UnwindAssemblyProfiler to UnwindAssembly along with its source files.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130156 91177308-0d34-0410-b5e6-96231b3b80d8
nwindAssembly.h
nwindAssemblyProfiler.h
97eecb1834431b39d4d58257f8ccfdea1db7f1de 25-Apr-2011 Greg Clayton <gclayton@apple.com> Put plug-ins into the correct directories as they were incorrectly located
in a Utility directory.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130135 91177308-0d34-0410-b5e6-96231b3b80d8
rchDefaultUnwindPlan.h
rchVolatileRegs.h
nwindAssemblyProfiler.h
ff44ab42e9f5d8e4d550e11d1b69413e0bc75b71 23-Apr-2011 Greg Clayton <gclayton@apple.com> Fixed the SymbolContext::DumpStopContext() to correctly indent and dump
inline contexts when the deepest most block is not inlined.

Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.

Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.

Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130044 91177308-0d34-0410-b5e6-96231b3b80d8
athMappingList.h
arget.h
17cd995147b3324680d845b3fc897febcc23c9e0 22-Apr-2011 Greg Clayton <gclayton@apple.com> Did some work on the "register read" command to only show the first register
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:

(lldb) register read --all

If you want to just see some register sets, you can currently specify them
by index:

(lldb) register read --set 0 --set 2

We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.

You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:

Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup
General Purpose Registers:
rax = 0x0000000100000e98 "----------------------------------------------------------------------"
rbx = 0x0000000000000000
rcx = 0x0000000000000001
rdx = 0x0000000000000000
rdi = 0x0000000100000e98 "----------------------------------------------------------------------"
rsi = 0x0000000100800000
rbp = 0x00007fff5fbff710
rsp = 0x00007fff5fbff280
r8 = 0x0000000000000040
r9 = 0x0000000000000000
r10 = 0x0000000000000000
r11 = 0x0000000000000246
r12 = 0x0000000000000000
r13 = 0x0000000000000000
r14 = 0x0000000000000000
r15 = 0x0000000000000000
rip = 0x00007fff828fa30f libSystem.B.dylib`puts + 1
rflags = 0x0000000000000246
cs = 0x0000000000000027
fs = 0x0000000000000000
gs = 0x0000000000000000

As we can see, we see two constant strings and the PC (register "rip") is
showing the code it resolves to.

I fixed the register "--format" option to work as expected.

Added a setting to disable skipping the function prologue when setting
breakpoints as a target settings variable:

(lldb) settings set target.skip-prologue false

Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.

Did some usability work on the OptionValue classes.

Fixed the "image lookup" command to correctly respond to the "--verbose"
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129977 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
abe0fed36d83e1c37af9dae90c2d25db742b4515 18-Apr-2011 Greg Clayton <gclayton@apple.com> Centralized a lot of the status information for processes,
threads, and stack frame down in the lldb_private::Process,
lldb_private::Thread, lldb_private::StackFrameList and the
lldb_private::StackFrame classes. We had some command line
commands that had duplicate versions of the process status
output ("thread list" and "process status" for example).

Removed the "file" command and placed it where it should
have been: "target create". Made an alias for "file" to
"target create" so we stay compatible with GDB commands.

We can now have multple usable targets in lldb at the
same time. This is nice for comparing two runs of a program
or debugging more than one binary at the same time. The
new command is "target select <target-idx>" and also to see
a list of the current targets you can use the new "target list"
command. The flow in a debug session can be:

(lldb) target create /path/to/exe/a.out
(lldb) breakpoint set --name main
(lldb) run
... hit breakpoint
(lldb) target create /bin/ls
(lldb) run /tmp
Process 36001 exited with status = 0 (0x00000000)
(lldb) target list
Current targets:
target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
* target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) target select 0
Current targets:
* target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) bt
* thread #1: tid = 0x2d03, 0x0000000100000b9a a.out`main + 42 at main.c:16, stop reason = breakpoint 1.1
frame #0: 0x0000000100000b9a a.out`main + 42 at main.c:16
frame #1: 0x0000000100000b64 a.out`start + 52

Above we created a target for "a.out" and ran and hit a
breakpoint at "main". Then we created a new target for /bin/ls
and ran it. Then we listed the targest and selected our original
"a.out" program, so we showed two concurent debug sessions
going on at the same time.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129695 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
tackFrame.h
tackFrameList.h
argetList.h
hread.h
e41494a9092e15192012a5e0a8a1ffd66c70b8bb 16-Apr-2011 Jim Ingham <jingham@apple.com> Add support for "dynamic values" for C++ classes. This currently only works for "frame var" and for the
expressions that are simple enough to get passed to the "frame var" underpinnings. The parser code will
have to be changed to also query for the dynamic types & offsets as it is looking up variables.

The behavior of "frame var" is controlled in two ways. You can pass "-d {true/false} to the frame var
command to get the dynamic or static value of the variables you are printing.

There's also a general setting:

target.prefer-dynamic-value (boolean) = 'true'

which is consulted if you call "frame var" without supplying a value for the -d option.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129623 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
tackFrame.h
arget.h
5e342f50b42b265d8568e1c926328858e74b2c0a 14-Apr-2011 Greg Clayton <gclayton@apple.com> Added auto completion for architecture names and for platforms.

Modified the OptionGroupOptions to be able to specify only some of the options
that should be appended by using the usage_mask in the group defintions and
also provided a way to remap them to a new usage mask after the copy. This
allows options to be re-used and also targetted for specific option groups.

Modfied the CommandArgumentType to have a new eArgTypePlatform enumeration.
Taught the option parser to be able to automatically use the appropriate
auto completion for a given options if nothing is explicitly specified
in the option definition. So you don't have to specify it in the option
definition tables.

Renamed the default host platform name to "host", and the default platform
hostname to be "localhost".

Modified the "file" and "platform select" commands to make sure all options
and args are good prior to creating a new platform. Also defer the computation
of the architecture in the file command until all options are parsed and the
platform has either not been specified or reset to a new value to avoid
computing the arch more than once.

Switch the PluginManager code over to using llvm::StringRef for string
comparisons and got rid of all the AccessorXXX functions in lieu of the newer
mutex + collection singleton accessors.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129483 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
143fcc3a15425659b381502ed4e1e50a3e726f36 13-Apr-2011 Greg Clayton <gclayton@apple.com> Added two new classes for command options:

lldb_private::OptionGroup
lldb_private::OptionGroupOptions

OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:

OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;

Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:

CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}

We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.

Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();

And implemented a new callback named:

virtual Error Options::OptionParsingFinished();

This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.

Modfied:

virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;

to be:

virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;

(option_idx is now unsigned).




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129415 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b72d0f098e45936fa72e26b1a026c603e17e2d6c 12-Apr-2011 Greg Clayton <gclayton@apple.com> Moved the execution context that was in the Debugger into
the CommandInterpreter where it was always being used.

Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).

Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.

Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.

Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.

Make sure we don't add empty ModuleSP entries to a module list.

Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.

Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.

Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.

Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.







git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129351 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
f15996eea072cdaa8a092f22d3a1212b3d95f0ec 08-Apr-2011 Greg Clayton <gclayton@apple.com> Modified the ArchSpec to take an optional "Platform *" when setting the triple.
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.

Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.

Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:

LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).

I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129112 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
ff39f746ebaa3710c44ba49bd9b0a6cf05f60a3f 01-Apr-2011 Greg Clayton <gclayton@apple.com> Added the ability to get a broadcaster event name for a given broadcaster
event.

Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters.

Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all
arguments, user and group info and more.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128694 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
0de37195f17fefb536157b3296a18999116b8125 01-Apr-2011 Jim Ingham <jingham@apple.com> Remove unneeded ExecutionContextScope variables.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128685 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
anguageRuntime.h
fa3a16a2ea380ef38388ebe323817bd1b32c20cd 31-Mar-2011 Jim Ingham <jingham@apple.com> Convert ValueObject to explicitly maintain the Execution Context in which they were created, and then use that when they update themselves. That means all the ValueObject evaluate me type functions that used to require a Frame object now do not. I didn't remove the SBValue API's that take this now useless frame, but I added ones that don't require the frame, and marked the SBFrame taking ones as deprecated.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128593 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContext.h
tackID.h
5c4b1607e8783a3d3f1f28fa66fcaa89ac246bd1 31-Mar-2011 Jim Ingham <jingham@apple.com> Add GetFrameWithStackID to the StackFrameList and the Thread (which routes to its StackFrameList.)

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128592 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
hread.h
24bc5d9bfad2a1c562c27e7cf37e1c56d85c45e7 30-Mar-2011 Greg Clayton <gclayton@apple.com> Many improvements to the Platform base class and subclasses. The base Platform
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:

int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff

// Platform subclass specific code...
int result = ...
return result;
}

Added new functions to the platform:

virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);

The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.

Added the parent process ID to the ProcessInfo class.

Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.

This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:

machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver


This of course also works remotely with the lldb-platform:

machine1.foo.com % lldb-platform --listen 1234

machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari

The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.

Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:

% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out

Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.

Modified the disassembly to show the current PC value. Example output:

(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret

This can be handy when dealing with the new --line options that was recently
added:

(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf

Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.

Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:

const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;





git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128563 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
arget.h
029bc71e61adbec91b920e488459aad3fad63ffb 30-Mar-2011 Stephen Wilson <wilsons@start.ca> give subclasses access to UnixSignals::m_signals

Allow subclasses of UnixSignals to access m_signals by marking the member
protected instead of private. This enables a subclass to provide a default
signal set as appropriate on construction.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128544 91177308-0d34-0410-b5e6-96231b3b80d8
nixSignals.h
b344843f75ef893762c93fd0a22d2d45712ce74d 24-Mar-2011 Greg Clayton <gclayton@apple.com> Fixed the LLDB build so that we can have private types, private enums and
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128239 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
bjCLanguageRuntime.h
latform.h
rocess.h
egisterContext.h
ectionLoadList.h
topInfo.h
arget.h
hread.h
hreadList.h
hreadPlan.h
hreadPlanStepInRange.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
hreadPlanTestCondition.h
58e26e0935138225477fd61283215ceff2068899 24-Mar-2011 Greg Clayton <gclayton@apple.com> Did a lot more work on abtracting and organizing the platforms.

On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
but this implements all the common functionality between
remote-macosx and remote-ios. It also allows for another
platform to be used (remote-gdb-server for now) when doing
remote connections. Keeping this pluggable will allow for
flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
cached SDK locations on the host.

A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote
protocol and uses the built in lldb_private::Host
static functions to implement many queries.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128193 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
cb8977d726be451df9978a74088435667fa37da2 23-Mar-2011 Greg Clayton <gclayton@apple.com> Added new platform commands:

platform connect <args>
platform disconnect

Each platform can decide the args they want to use for "platform connect". I
will need to add a function that gets the connect options for the current
platform as each one can have different options and argument counts.

Hooked up more functionality in the PlatformMacOSX and PlatformRemoteiOS.
Also started an platform agnostic PlatformRemoteGDBServer.cpp which can end
up being used by one or more actual platforms. It can also be specialized and
allow for platform specific commands.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128123 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
a733c04608cc94592a15d27583529588e19db552 21-Mar-2011 Greg Clayton <gclayton@apple.com> Added real user/group id, effective user/group id, and parent
process ID to the ProcessInfo.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128023 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
b1888f24fa181489840b9acf193e224d125d0776 19-Mar-2011 Greg Clayton <gclayton@apple.com> Added more platform support. There are now some new commands:

platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)

When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can
do:

(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib


Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.

This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@127934 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
arget.h
d60d94a5126b93fda98678a68322abc2164073db 11-Mar-2011 Jim Ingham <jingham@apple.com> Add a first pass at a "stop hook" mechanism. This allows you to add commands that get run every time the debugger stops, whether due to a breakpoint, the end of a step, interrupt, etc. You can also specify in which context you want the stop hook to run, for instance only on a particular thread, or only in a particular shared library, function, file, line range within a file.

Still need to add "in methods of a class" to the specifiers, and the ability to write the stop hooks in the Scripting language as well as in the Command Language.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@127457 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
2a456816c5d7c575f2e141acd48bb5f8085d9910 10-Mar-2011 Caroline Tice <ctice@apple.com> The UserSettings controllers must be initialized & terminated in the
correct order. Previously this was tacitly implemented but not
enforced, so it was possible to accidentally do things in the wrong
order and cause problems. This fixes that problem.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@127430 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
e4b9c1fb338ee1ada72e6a3c198afb342d68c5c1 08-Mar-2011 Greg Clayton <gclayton@apple.com> LLDB now has "Platform" plug-ins. Platform plug-ins are plug-ins that provide
an interface to a local or remote debugging platform. By default each host OS
that supports LLDB should be registering a "default" platform that will be
used unless a new platform is selected. Platforms are responsible for things
such as:
- getting process information by name or by processs ID
- finding platform files. This is useful for remote debugging where there is
an SDK with files that might already or need to be cached for debug access.
- getting a list of platform supported architectures in the exact order they
should be selected. This helps the native x86 platform on MacOSX select the
correct x86_64/i386 slice from universal binaries.
- Connect to remote platforms for remote debugging
- Resolving an executable including finding an executable inside platform
specific bundles (macosx uses .app bundles that contain files) and also
selecting the appropriate slice of universal files for a given platform.

So by default there is always a local platform, but remote platforms can be
connected to. I will soon be adding a new "platform" command that will support
the following commands:
(lldb) platform connect --name machine1 macosx connect://host:port
Connected to "machine1" platform.
(lldb) platform disconnect macosx

This allows LLDB to be well setup to do remote debugging and also once
connected process listing and finding for things like:
(lldb) process attach --name x<TAB>

The currently selected platform plug-in can now auto complete any available
processes that start with "x". The responsibilities for the platform plug-in
will soon grow and expand.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@127286 91177308-0d34-0410-b5e6-96231b3b80d8
latform.h
rocess.h
argetList.h
c7129c3ca353eb7f0bc8c2aa0d99b54de21b9de6 02-Mar-2011 Jim Ingham <jingham@apple.com> Add some function docs.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@126868 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
a2f7423310044cf76d8d52aa9153b7fd8b226b49 24-Feb-2011 Greg Clayton <gclayton@apple.com> Fixed CommandReturnObject::SetImmediateErrorFile() to set the correct stream.

Modifed lldb_private::Process to be able to handle connecting to a remote
target that isn't running a process. This leaves lldb_private::Process in the
eStateConnected state from which we can then do an attach or launch.

Modified ProcessGDBRemote to be able to set stdin, stdout, stderr, working
dir, disable ASLR and a few other settings down by using new GDB remote
packets. This allows us to keep all of our current launch flags and settings
intact and still be able to communicate them over to the remote GDB server.
Previously these were being sent as arguments to the debugserver binary that
we were spawning. Also modified ProcessGDBRemote to handle losing connection
to the remote GDB server and always exit immediately. We do this by watching
the lldb_private::Communication event bit for the read thread exiting in the
ProcessGDBRemote async thread.

Added support for many of the new 'Q' packets for setting stdin, stdout,
stderr, working dir and disable ASLR to the GDBRemoteCommunication class for
easy accesss.

Modified debugserver for all of the new 'Q' packets and also made it so that
debugserver always exists if it loses connection with the remote debugger.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@126444 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
940b103224f3062578c7a7e6e76d8bf4a7956f2a 23-Feb-2011 Greg Clayton <gclayton@apple.com> Abtracted all mach-o and ELF out of ArchSpec. This patch is a modified form
of Stephen Wilson's idea (thanks for the input Stephen!). What I ended up
doing was:
- Got rid of ArchSpec::CPU (which was a generic CPU enumeration that mimics
the contents of llvm::Triple::ArchType). We now rely upon the llvm::Triple
to give us the machine type from llvm::Triple::ArchType.
- There is a new ArchSpec::Core definition which further qualifies the CPU
core we are dealing with into a single enumeration. If you need support for
a new Core and want to debug it in LLDB, it must be added to this list. In
the future we can allow for dynamic core registration, but for now it is
hard coded.
- The ArchSpec can now be initialized with a llvm::Triple or with a C string
that represents the triple (it can just be an arch still like "i386").
- The ArchSpec can still initialize itself with a architecture type -- mach-o
with cpu type and subtype, or ELF with e_machine + e_flags -- and this will
then get translated into the internal llvm::Triple::ArchSpec + ArchSpec::Core.
The mach-o cpu type and subtype can be accessed using the getter functions:

uint32_t
ArchSpec::GetMachOCPUType () const;

uint32_t
ArchSpec::GetMachOCPUSubType () const;

But these functions are just converting out internal llvm::Triple::ArchSpec
+ ArchSpec::Core back into mach-o. Same goes for ELF.

All code has been updated to deal with the changes.

This should abstract us until later when the llvm::TargetSpec stuff gets
finalized and we can then adopt it.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@126278 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
d284b663aa7d08b4f767de5ffa6289f33fcbcce7 18-Feb-2011 Greg Clayton <gclayton@apple.com> Added new target instance settings for execution settings:

Targets can now specify some additional parameters for when we debug
executables that can help with plug-in selection:

target.execution-level = auto | user | kernel
target.execution-mode = auto | dynamic | static
target.execution-os-type = auto | none | halted | live

On some systems, the binaries that are created are the same wether you use
them to debug a kernel, or a user space program. Many times inspecting an
object file can reveal what an executable should be. For these cases we can
now be a little more complete by specifying wether to detect all of these
things automatically (inspect the main executable file and select a plug-in
accordingly), or manually to force the selection of certain plug-ins.

To do this we now allow the specficifation of wether one is debugging a user
space program (target.execution-level = user) or a kernel program
(target.execution-level = kernel).

We can also specify if we want to debug a program where shared libraries
are dynamically loaded using a DynamicLoader plug-in
(target.execution-mode = dynamic), or wether we will treat all symbol files
as already linked at the correct address (target.execution-mode = static).

We can also specify if the inferior we are debugging is being debugged on
a bare board (target.execution-os-type = none), or debugging an OS where
we have a JTAG or other direct connection to the inferior stops the entire
OS (target.execution-os-type = halted), or if we are debugging a program on
something that has live debug services (target.execution-os-type = live).

For the "target.execution-os-type = halted" mode, we will need to create
ProcessHelper plug-ins that allow us to extract the process/thread and other
OS information by reading/writing memory.

This should allow LLDB to be used for a wide variety of debugging tasks and
handle them all correctly.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@125815 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
75c703dd8b492bad25a987b96853626641ae7246 16-Feb-2011 Greg Clayton <gclayton@apple.com> The DynamicLoader plug-in instance now lives up in lldb_private::Process where
it should live and the lldb_private::Process takes care of managing the
auto pointer to the dynamic loader instance.

Also, now that the ArchSpec contains the target triple, we are able to
correctly set the Target architecture in DidLaunch/DidAttach in the subclasses,
and then the lldb_private::Process will find the dynamic loader plug-in
by letting the dynamic loader plug-ins inspect the arch/triple in the target.

So now the ProcessGDBRemote plug-in is another step closer to be purely
process/platform agnostic.

I updated the ProcessMacOSX and the ProcessLinux plug-ins accordingly.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@125650 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
395fc33dc4b06c048ed35047ec461bc092ef2df3 15-Feb-2011 Greg Clayton <gclayton@apple.com> Made lldb_private::ArchSpec contain much more than just an architecture. It
now, in addition to cpu type/subtype and architecture flavor, contains:
- byte order (big endian, little endian)
- address size in bytes
- llvm::Triple for true target triple support and for more powerful plug-in
selection.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@125602 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
rocess.h
arget.h
f9f40c20b210eea72ab042c63178ca000f005ed9 08-Feb-2011 Jim Ingham <jingham@apple.com> Rework the RunThreadPlan event handling to use Event Hijacking not stopping the event thread. Also clarify the logic of the function.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@125083 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
17f5afe9ed10bda3efbce0f26cf0c030331f8b15 05-Feb-2011 Greg Clayton <gclayton@apple.com> Header patch, virtual dtor patch and missed UUID patch from Kirk Beitz.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124931 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTracer.h
0bfda0b1371b2381326b441adc93a6db3dc5f74f 05-Feb-2011 Greg Clayton <gclayton@apple.com> Added a quicker lookup in the SectionLoadList when looking things up by
section by using a DenseMap.

Fixed some logging calls to get the log shared pointer.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124926 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
0467c78e9a75eff9ec33d3c1f39fa83e1c5d9241 04-Feb-2011 Greg Clayton <gclayton@apple.com> Applied a fix to qualify "UUID" with the lldb_private namespace to fix
build issues on MinGW.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124888 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
argetList.h
a14755aaab93eaa3e60ae10e75cb5c4bd3244fbb 04-Feb-2011 Johnny Chen <johnny.chen@apple.com> Patches from Jean-Daniel:

One (stepout.patch) to fix a problem in ThreadPlanStepOut.cpp. There is an erroneous semi colon at end of an if statement that make the condition useless (if body is empty).

And the second patch is to remove to useless typedef on enum, and so avoid a lot of warnings with clang++.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124874 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
e71e258286a1713dbb2d366d8b81ff2f28e0216f 04-Feb-2011 Greg Clayton <gclayton@apple.com> Added support for attaching to a remote debug server with the new command:
(lldb) process connect <remote-url>

Currently when you specify a file with the file command it helps us to find
a process plug-in that is suitable for debugging. If you specify a file you
can rely upon this to find the correct debugger plug-in:

% lldb a.out
Current executable set to 'a.out' (x86_64).
(lldb) process connect connect://localhost:2345
...

If you don't specify a file, you will need to specify the plug-in name that
you wish to use:

% lldb
(lldb) process connect --plugin process.gdb-remote connect://localhost:2345

Other connection URL examples:

(lldb) process connect connect://localhost:2345
(lldb) process connect tcp://127.0.0.1
(lldb) process connect file:///dev/ttyS1

We are currently treating the "connect://host:port" as a way to do raw socket
connections. If there is a URL for this already, please let me know and we
will adopt it.

So now you can connect to a remote debug server with the ProcessGDBRemote
plug-in. After connection, it will ask for the pid info using the "qC" packet
and if it responds with a valid process ID, it will be equivalent to attaching.
If it response with an error or invalid process ID, the LLDB process will be
in a new state: eStateConnected. This allows us to then download a program or
specify the program to run (using the 'A' packet), or specify a process to
attach to (using the "vAttach" packets), or query info about the processes
that might be available.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124846 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
7e2f91cb958c8670774cb2190db7b858618b5b9b 29-Jan-2011 Greg Clayton <gclayton@apple.com> Finished up the async attach support. This allows us to request to attach
by name or by pid (with or without waiting for a process to launch) and
catch the response asynchronously.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124530 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
68bffc51b218dc3a124820cb4d983204bf20be4a 29-Jan-2011 Jim Ingham <jingham@apple.com> The m_next_action is simpler if it is an auto_pointer.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124525 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
c2dc7c88cebe05cce059970cc907768256b28a42 29-Jan-2011 Jim Ingham <jingham@apple.com> Added a completion action class to the Process events so that we can make things like Attach and later Launch start their job, and then return to the event loop while waiting for the work to be done.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124520 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
bdcb6abaa287df2c5f312c51d993c1d0b0cb120c 26-Jan-2011 Greg Clayton <gclayton@apple.com> Enabled extra warnings and fixed a bunch of small issues.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124250 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContextScope.h
ac95966f900e8af29c25b3bd85b3d41cd4568857 24-Jan-2011 Jim Ingham <jingham@apple.com> More useful STEP logging.

Be sure to clear out the base plan's m_report_run and m_report_stop each time we resume so we don't use stale values.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124113 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanBase.h
de915beb5febe597505ba33fdc2c39eea2abdbd4 23-Jan-2011 Greg Clayton <gclayton@apple.com> Added a new variant of SBTarget::Launch() that deprectates the old one that
takes separate file handles for stdin, stdout, and stder and also allows for
the working directory to be specified.

Added support to "process launch" to a new option: --working-dir=PATH. We
can now set the working directory. If this is not set, it defaults to that
of the process that has LLDB loaded. Added the working directory to the
host LaunchInNewTerminal function to allows the current working directory
to be set in processes that are spawned in their own terminal. Also hooked this
up to the lldb_private::Process and all mac plug-ins. The linux plug-in had its
API changed, but nothing is making use of it yet. Modfied "debugserver" and
"darwin-debug" to also handle the current working directory options and modified
the code in LLDB that spawns these tools to pass the info along.

Fixed ProcessGDBRemote to properly pass along all file handles for stdin, stdout
and stderr.

After clearing the default values for the stdin/out/err file handles for
process to be NULL, we had a crasher in UserSettingsController::UpdateStringVariable
which is now fixed. Also fixed the setting of boolean values to be able to
be set as "true", "yes", "on", "1" for true (case insensitive) and "false", "no",
"off", or "0" for false.

Fixed debugserver to properly handle files for STDIN, STDOUT and STDERR that are not
already opened. Previous to this fix debugserver would only correctly open and dupe
file handles for the slave side of a pseudo terminal. It now correctly handles
getting STDIN for the inferior from a file, and spitting STDOUT and STDERR out to
files. Also made sure the file handles were correctly opened with the NOCTTY flag
for terminals.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124060 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
72e1c782ba1e4226da37af4722af608de9f39408 23-Jan-2011 Greg Clayton <gclayton@apple.com> Fixed an issue in "SBError SBProcess::Destroy ()" where it wasn't properly
checking the validity of the shared pointer prior to using it.

Fixed the GDB remote plug-in to once again watch for a reply from the "k"
packet, and fixed the logic to make sure the thread requesting the kill
and the async thread play nice (and very quickly) by synchronizing the
packet sending and reply. I also tweaked some of the shut down packet
("k" kill, "D" detach, and the halt packet) to make sure they do the right
thing.

Fixed "StateType Process::WaitForProcessStopPrivate (...)" to correctly pass
the timeout along to WaitForStateChangedEventsPrivate() and made the function
behave correctly with respect to timing out.

Added separate STDIN, STDOUT, and STDERR support to debugserver. Also added
the start of being able to set the working directory for the inferior process.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124049 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
55e01d8635032ee10cc06e0114213a76a8677be0 22-Jan-2011 Jim Ingham <jingham@apple.com> Added an interface for noticing new thread creation. At this point, I only turn it on when
we are requesting a single thread to run. May seem like a silly thing to do, but the kernel
on MacOS X will inject new threads into a program willy-nilly, and I would like to keep them
from running if I can.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124018 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
cce607b039a7636f50f53b3ed52f6e8db99fffd5 22-Jan-2011 Jim Ingham <jingham@apple.com> Centralize the register reporting (might want to move this function to Thread).


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@124016 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
1ebdcc7789aac1ef30ad6dcd485dff86c63136ad 21-Jan-2011 Greg Clayton <gclayton@apple.com> Added support for stepping out of a frame. If you have 10 stack frames, and you
select frame #3, you can then do a step out and be able to go directly to the
frame above frame #3!

Added StepOverUntil and StepOutOfFrame to the SBThread API to allow more powerful
stepping.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123970 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanStepOut.h
hreadPlanStepUntil.h
c67efa41a83b0f8b2bab467436a23b50a44e7f30 20-Jan-2011 Greg Clayton <gclayton@apple.com> Added the ability to StackFrame::GetValueForVariableExpressionPath(...) to avoid
fragile ivars if requested. This was done by changing the previous second parameter
to an options bitfield that can be populated by logical OR'ing the new
StackFrame::ExpressionPathOption enum values together:

typedef enum ExpressionPathOption
{
eExpressionPathOptionCheckPtrVsMember = (1u << 0),
eExpressionPathOptionsNoFragileObjcIvar = (1u << 1),
};

So the old function was:
lldb::ValueObjectSP
StackFrame::GetValueForVariableExpressionPath (const char *var_expr, bool check_ptr_vs_member, Error &error);

But it is now:

lldb::ValueObjectSP
StackFrame::GetValueForVariableExpressionPath (const char *var_expr, uint32_t options, Error &error);

This allows the expression parser in Target::EvaluateExpression(...) to avoid
using simple frame variable expression paths when evaluating something that might
be a fragile ivar.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123938 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
15dcb7ca49b8d8f46910cf085b4c249aac5317fa 20-Jan-2011 Jim Ingham <jingham@apple.com> Back up both the register AND the stop state when calling functions.
Set the thread state to "bland" before calling functions so they don't
inherit the pending signals and die.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123869 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
hread.h
hreadPlan.h
hreadPlanCallFunction.h
d0882d062a09effb7a22ce81cb327e9b9fa108bd 20-Jan-2011 Greg Clayton <gclayton@apple.com> Make expressions clean up their JIT'ed code allocation.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123855 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallUserExpression.h
3e2ef48cd65658162791134b34c3c1fb9e8c8991 19-Jan-2011 Jim Ingham <jingham@apple.com> ThreadPlanCallUserExpression's WillPop needs to call it's parent's WillPop.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123816 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
hreadPlanCallUserExpression.h
6c9662e0e5840b557fcd4bd990620e106e4a18e2 18-Jan-2011 Jim Ingham <jingham@apple.com> In ThreadPlanCallFunction, do the Takedown right when the thread plan gets popped. When the function call is discarded (e.g. when it crashes and discard_on_error is true) the plan gets discarded. You need to make sure that the stack gets restored right then, and not wait till you start again and the thread plan stack is cleared.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123716 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
3bb825931521bc4b288274cb0b3c7f5c16c83126 18-Jan-2011 Jim Ingham <jingham@apple.com> Add a method on the ObjC Language Runtime that returns the runtime version.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123693 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
6a92553d2cc2b7a3b853fcb6da101583435c2dc0 13-Jan-2011 Sean Callanan <scallanan@apple.com> Implemented a major overhaul of the way variables are handled
by LLDB. Instead of being materialized into the input structure
passed to the expression, variables are left in place and pointers
to them are materialzied into the structure. Variables not resident
in memory (notably, registers) get temporary memory regions allocated
for them.

Persistent variables are the most complex part of this, because they
are made in various ways and there are different expectations about
their lifetime. Persistent variables now have flags indicating their
status and what the expectations for longevity are. They can be
marked as residing in target memory permanently -- this is the
default for result variables from expressions entered on the command
line and for explicitly declared persistent variables (but more on
that below). Other result variables have their memory freed.

Some major improvements resulting from this include being able to
properly take the address of variables, better and cleaner support
for functions that return references, and cleaner C++ support in
general. One problem that remains is the problem of explicitly
declared persistent variables; I have not yet implemented the code
that makes references to them into indirect references, so currently
materialization and dematerialization of these variables is broken.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123371 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
123db408a6bc06614ec893040aaad84d8d0d16f9 12-Jan-2011 Greg Clayton <gclayton@apple.com> Added the following functions to SBThread to allow threads to be suspended when a process is resumed:

bool SBThread::Suspend();
bool SBThread::Resume();
bool SBThread::IsSuspended();



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123300 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
a875b64ab8d258b28959d05eea37cb5dfdd72730 09-Jan-2011 Greg Clayton <gclayton@apple.com> Put more smarts into the RegisterContext base class. Now the base class has
a method:

void RegisterContext::InvalidateIfNeeded (bool force);

Each time this function is called, when "force" is false, it will only call
the pure virtual "virtual void RegisterContext::InvalideAllRegisters()" if
the register context's stop ID doesn't match that of the process. When the
stop ID doesn't match, or "force" is true, the base class will clear its
cached registers and the RegisterContext will update its stop ID to match
that of the process. This helps make it easier to correctly flush the register
context (possibly from multiple locations depending on when and where new
registers are availabe) without inadvertently clearing the register cache
when it doesn't need to be.

Modified the ProcessGDBRemote plug-in to be much more efficient when it comes
to:
- caching the expedited registers in the stop reply packets (we were ignoring
these before and it was causing us to read at least three registers every
time we stopped that were already supplied in the stop reply packet).
- When a thread has no stop reason, don't keep asking for the thread stopped
info. Prior to this fix we would continually send a qThreadStopInfo packet
over and over when any thread stop info was requested. We now note the stop
ID that the stop info was requested for and avoid multiple requests.

Cleaned up some of the expression code to not look for ClangExpressionVariable
objects up by name since they are now shared pointers and we can just look for
the exact pointer match and avoid possible errors.

Fixed an bug in the ValueObject code that would cause children to not be
displayed.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123127 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
fd119995f2693eb6e9e2ea3e685f9d872f5cd4f1 07-Jan-2011 Greg Clayton <gclayton@apple.com> Added memory caching to lldb_private::Process. All lldb_private::Process
subclasses will automatically be able to take advantage of caching. The
cache line size is set to 512 by default.

This greatly speeds up stack backtraces on MacOSX when using the
ProcessGDBRemote process plug-in since only about 6300 packets per second
can be sent.

Initial speedups show:

Prior to caching: 10,000 stack frames took 5.2 seconds
After caching: 10,000 stack frames in 240 ms!

About a 20x speedup!



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@122996 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
26100dcbc49648eac03fa8e8c3d7c793808fc8d6 07-Jan-2011 Greg Clayton <gclayton@apple.com> Added the ability for Target::ReadMemory to prefer to read from the file
cache even when a valid process exists. Previously, Target::ReadMemory would
read from the process if there was a valid one and then fallback to the
object file cache.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@122989 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
08d7d3ae16110aa68ed40c161eac8571aeb94cd9 06-Jan-2011 Greg Clayton <gclayton@apple.com> Fixed issues with RegisterContext classes and the subclasses. There was
an issue with the way the UnwindLLDB was handing out RegisterContexts: it
was making shared pointers to register contexts and then handing out just
the pointers (which would get put into shared pointers in the thread and
stack frame classes) and cause double free issues. MallocScribble helped to
find these issues after I did some other cleanup. To help avoid any
RegisterContext issue in the future, all code that deals with them now
returns shared pointers to the register contexts so we don't end up with
multiple deletions. Also now that the RegisterContext class doesn't require
a stack frame, we patched a memory leak where a StackFrame object was being
created and leaked.

Made the RegisterContext class not have a pointer to a StackFrame object as
one register context class can be used for N inlined stack frames so there is
not a 1 - 1 mapping. Updates the ExecutionContextScope part of the
RegisterContext class to never return a stack frame to indicate this when it
is asked to recreate the execution context. Now register contexts point to the
concrete frame using a concrete frame index. Concrete frames are all of the
frames that are actually formed on the stack of a thread. These concrete frames
can be turned into one or more user visible frames due to inlining. Each
inlined stack frame has the exact same register context (shared via shared
pointers) as any parent inlined stack frames all the way up to the concrete
frame itself.

So now the stack frames and the register contexts should behave much better.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@122976 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
tackFrame.h
tackFrameList.h
hread.h
nwind.h
bdcda468276dc9ab6bf648fc8cc07f3faad91526 20-Dec-2010 Greg Clayton <gclayton@apple.com> The LLDB API (lldb::SB*) is now thread safe!



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@122262 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
6e889b142d6acbe1c318bc1b690dd9c3722d7095 17-Dec-2010 Greg Clayton <gclayton@apple.com> Removed libunwind sources as we aren't using them anymore.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@122059 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
6d29aebd9e7f8fa947dcc9c344aec2393922973d 16-Dec-2010 Greg Clayton <gclayton@apple.com> Added header doc for the recently added Process::ReadUnsignedInteger (addr_t addr, size_t int_byte_size, Error &error) function.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121999 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
f72fdeee129bbd7195f3db888b561ede689886aa 16-Dec-2010 Greg Clayton <gclayton@apple.com> Added the ability to read unsigned integers from the Process:

uint64_t Process::ReadUnsignedInteger (addr_t addr, size_t int_byte_size, Error &error);


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121996 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
c3b61d239a53271d013b82ffaba6ab4e92b7fcc1 15-Dec-2010 Greg Clayton <gclayton@apple.com> Fixed the "expression" command object to use the StackFrame::GetValueForExpressionPath()
function and also hooked up better error reporting for when things fail.

Fixed issues with trying to display children of pointers when none are
supposed to be shown (no children for function pointers, and more like this).
This was causing child value objects to be made that were correctly firing
an assertion.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121841 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
427f290ff96f3ab9f2cf3a1af7001d2c560424c7 14-Dec-2010 Greg Clayton <gclayton@apple.com> Modified LLDB expressions to not have to JIT and run code just to see variable
values or persistent expression variables. Now if an expression consists of
a value that is a child of a variable, or of a persistent variable only, we
will create a value object for it and make a ValueObjectConstResult from it to
freeze the value (for program variables only, not persistent variables) and
avoid running JITed code. For everything else we still parse up and JIT code
and run it in the inferior.

There was also a lot of clean up in the expression code. I made the
ClangExpressionVariables be stored in collections of shared pointers instead
of in collections of objects. This will help stop a lot of copy constructors on
these large objects and also cleans up the code considerably. The persistent
clang expression variables were moved over to the Target to ensure they persist
across process executions.

Added the ability for lldb_private::Target objects to evaluate expressions.
We want to evaluate expressions at the target level in case we aren't running
yet, or we have just completed running. We still want to be able to access the
persistent expression variables between runs, and also evaluate constant
expressions.

Added extra logging to the dynamic loader plug-in for MacOSX. ModuleList objects
can now dump their contents with the UUID, arch and full paths being logged with
appropriate prefix values.

Thread hardened the Communication class a bit by making the connection auto_ptr
member into a shared pointer member and then making a local copy of the shared
pointer in each method that uses it to make sure another thread can't nuke the
connection object while it is being used by another thread.

Added a new file to the lldb/test/load_unload test that causes the test a.out file
to link to the libd.dylib file all the time. This will allow us to test using
the DYLD_LIBRARY_PATH environment variable after moving libd.dylib somewhere else.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121745 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
tackFrame.h
arget.h
3aa7da5cb3327792415de44405e0896c6bdc305b 13-Dec-2010 Sean Callanan <scallanan@apple.com> Added support for generating expressions that have
access to the members of the Objective-C self object.

The approach we take is to generate the method as a
@category on top of the self object, and to pass the
"self" pointer to it. (_cmd is currently NULL.)

Most changes are in ClangExpressionDeclMap, but the
change that adds support to the ABIs to pass _cmd
touches a fair amount of code.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121722 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hreadPlanCallFunction.h
hreadPlanCallUserExpression.h
6507dd90b5d27662537caee49a3a3cc236f85a53 10-Dec-2010 Jim Ingham <jingham@apple.com> Changing the ObjC find method implementation to use a ClangUtilityFunction inserted into the target. Consolidate all the
logic for finding the target of a method dispatch into this function, insert & call it. Gets calls to super, and all the
fixup & fixedup variants working properly. Also gets the class from the object so that we step through KVO wrapper methods
into the actual user code.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121437 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepOut.h
58e844b3561848e73e69d6d98746d4851e78306e 08-Dec-2010 Greg Clayton <gclayton@apple.com> Added the ability to dump sections to a certain depth (for when sections
have children sections).

Modified SectionLoadList to do it's own multi-threaded protected on its map.
The ThreadSafeSTLMap class was difficult to deal with and wasn't providing
much utility, it was only getting in the way.

Make sure when the communication read thread is about to exit, it clears the
thread in the main class.

Fixed the ModuleList to correctly ignore architectures and UUIDs if they aren't
valid when searching for a matching module. If we specified a file with no arch,
and then modified the file and loaded it again, it would not match on subsequent
searches if the arch was invalid since it would compare an invalid architecture
to the one that was found or selected within the shared library or executable.
This was causing stale modules to stay around in the global module list when they
should have been removed.

Removed deprecated functions from the DynamicLoaderMacOSXDYLD class.

Modified "ProcessGDBRemote::IsAlive" to check if we are connected to a gdb
server and also make sure our process hasn't exited.





git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121236 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
638351aee118e89c658ca295cb4e9d1db7849bef 04-Dec-2010 Greg Clayton <gclayton@apple.com> Added the ability for a process to inherit the current host environment. This
was done as an settings variable in the process for now. We will eventually
move all environment stuff over to the target, but we will leave it with the
process for now. The default setting is for a process to inherit the host
environment. This can be disabled by setting the "inherit-env" setting to
false in the process.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@120862 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
bd666017403e102e0ca435d6da585ff979f83598 03-Dec-2010 Caroline Tice <ctice@apple.com> Add '-no-stdio' option to 'process launch' command, which causes the
inferior to be launched without setting up terminal stdin/stdout for it
(leaving the lldb command line accessible while the program is executing).
Also add a user settings variable, 'target.process.disable-stdio' to allow
the user to set this globally rather than having to use the command option
each time the process is launched.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@120825 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
360f53f3c216ee4fb433da0a367168785328a856 30-Nov-2010 Jim Ingham <jingham@apple.com> Moved the code in ClangUserExpression that set up & ran the thread plan with timeouts, and restarting with all threads into a utility function in Process. This required a bunch of renaming.

Added a ThreadPlanCallUserExpression that differs from ThreadPlanCallFunction in that it holds onto a shared pointer to its ClangUserExpression so that can't go away before the thread plan is done using it.

Fixed the stop message when you hit a breakpoint while running a user expression so it is more obvious what has happened.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@120386 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hreadPlan.h
hreadPlanCallUserExpression.h
990de7bb41d3afec6b789155408ff322187d8682 19-Nov-2010 Greg Clayton <gclayton@apple.com> Cleaned up code that wasn't using the Initialize and Terminate paradigm by
changing it to use it. There was an extra parameter added to the static
accessor global user settings controllers that wasn't needed. A bool was being
used as a parameter to the accessor just so it could be used to clean up
the global user settings controller which is now fixed by splitting up the
initialization into the "static void Class::Initialize()", access into the
"static UserSettingsControllerSP & Class::GetSettingsController()", and
cleanup into "static void Class::Terminate()".

Also added initialize and terminate calls to the logging code to avoid issues
when LLDB is shutting down. There were cases after the logging was switched
over to use shared pointers where we could crash if the global destructor
chain was being run and it causes the log to be destroyed and any any logging
occurred.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119757 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
20d338fad87eba91de65aa9bec76e01c04472848 18-Nov-2010 Greg Clayton <gclayton@apple.com> Fixed Process::Halt() as it was broken for "process halt" after recent changes
to the DoHalt down in ProcessGDBRemote. I also moved the functionality that
was in ProcessGDBRemote::DoHalt up into Process::Halt so not every class has
to implement a tricky halt/resume on the internal state thread. The
functionality is the same as it was before with two changes:
- when we eat the event we now just reuse the event we consume when the private
state thread is paused and set the interrupted bool on the event if needed
- we also properly update the Process::m_public_state with the state of the
event we consume.

Prior to this, if you issued a "process halt" it would eat the event, not
update the process state, and then produce a new event with the interrupted
bit set and send it. Anyone listening to the event would get the stopped event
with a process that whose state was set to "running".

Fixed debugserver to not have to be spawned with the architecture of the
inferior process. This worked fine for launching processes, but when attaching
to processes by name or pid without a file in lldb, it would fail.

Now debugserver can support multiple architectures for a native debug session
on the current host. This currently means i386 and x86_64 are supported in
the same binary and a x86_64 debugserver can attach to a i386 executable.
This change involved a lot of changes to make sure we dynamically detect the
correct registers for the inferior process.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119680 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
cdea2365030d283cd9082fa0b80bead79a104e55 18-Nov-2010 Jim Ingham <jingham@apple.com> The thread plan destructors may call Thread virtual methods. That means they have to get cleaned up in the derived class's destructor. Make sure that happens.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119675 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
ae7862a7fa70080e7450174b05544e7673fefb9d 17-Nov-2010 Jim Ingham <jingham@apple.com> Add a ThreadPlanAssemblyTracer that takes just a thread (since that's how we call it from ThreadPlanBase...)

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119549 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTracer.h
3ae449a5c3b4f51afc0da22cfeaef00c303c0acc 17-Nov-2010 Jim Ingham <jingham@apple.com> Added an "Interrupted" bit to the ProcessEventData. Halt now generates an event
with the Interrupted bit set. Process::HandlePrivateEvent ignores Interrupted events.
DoHalt is changed to ensure that the stop even is processed, and an event with
the Interrupted event is posted. Finally ClangFunction is rationalized to use this
facility so the that Halt is handled more deterministically.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119453 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
861efb3f6e225e45c45511d6da894633b36025a1 16-Nov-2010 Caroline Tice <ctice@apple.com> Make processes use InputReaders for their input. Move the process
ReadThread stuff into the main Process class (out of the Process Plugins).
This has the (intended) side effect of disabling the command line tool
from reading input/commands while the process is running (the input is
directed to the running process rather than to the command interpreter).



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@119329 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
5b0228a06dedf7d450308a443c255f2d28c247f3 12-Nov-2010 Sean Callanan <scallanan@apple.com> Added a thread plan tracer that prints lines of
assembly as well as registers that changed.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118879 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTracer.h
da6b16eeae3a071a98072b991d89c5682939bf9f 12-Nov-2010 Jim Ingham <jingham@apple.com> Added OnStart and OnEnd methods to the tracer.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118876 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanTracer.h
48685687640e88515cd17b6fa613d13e180558d6 12-Nov-2010 Sean Callanan <scallanan@apple.com> Excised a version of the low-level function calling
logic that supported calling functions with arbitrary
arguments. We use ClangFunction for this, and the
low-level logic is only required to support one or two
pointer arguments.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118871 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hread.h
hreadPlanCallFunction.h
745ac7a5826fe7c392007941a4046bfb1a8dff81 11-Nov-2010 Jim Ingham <jingham@apple.com> Add ThreadPlanTracer class to allow instruction step tracing of execution.
Also changed eSetVarTypeBool to eSetVarTypeBoolean to make it consistent with eArgTypeBoolean.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118824 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanBase.h
hreadPlanCallFunction.h
hreadPlanRunToAddress.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepOverBreakpoint.h
hreadPlanStepRange.h
hreadPlanStepThrough.h
hreadPlanStepUntil.h
hreadPlanTestCondition.h
hreadPlanTracer.h
ea9d4267a629a1c732eb0400fa0288cee31ad49d 05-Nov-2010 Jim Ingham <jingham@apple.com> Added the equivalent of gdb's "unwind-on-signal" to the expression command, and a parameter to control it in ClangUserExpression, and on down to ClangFunction.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118290 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
2eac2b9b61bfbe6079bab86e879263d63046ac0a 04-Nov-2010 Jim Ingham <jingham@apple.com> Add a ObjC V1 runtime, and a generic AppleObjCRuntime plugin.

Also move the Checker creation into the Apple Runtime code.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118255 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
0baa394cd55c6dfb7a6259d215d0dea2b708067b 04-Nov-2010 Greg Clayton <gclayton@apple.com> Added support for loading and unloading shared libraries. This was done by
adding support into lldb_private::Process:

virtual uint32_t
lldb_private::Process::LoadImage (const FileSpec &image_spec,
Error &error);

virtual Error
lldb_private::Process::UnloadImage (uint32_t image_token);

There is a default implementation that should work for both linux and MacOSX.
This ability has also been exported through the SBProcess API:

uint32_t
lldb::SBProcess::LoadImage (lldb::SBFileSpec &image_spec,
lldb::SBError &error);

lldb::SBError
lldb::SBProcess::UnloadImage (uint32_t image_token);

Modified the DynamicLoader plug-in interface to require it to be able to
tell us if it is currently possible to load/unload a shared library:

virtual lldb_private::Error
DynamicLoader::CanLoadImage () = 0;

This way the dynamic loader plug-ins are allows to veto whether we can
currently load a shared library since the dynamic loader might know if it is
currenlty loading/unloading shared libraries. It might also know about the
current host system and know where to check to make sure runtime or malloc
locks are currently being held.

Modified the expression parser to have ClangUserExpression::Evaluate() be
the one that causes the dynamic checkers to be loaded instead of other code
that shouldn't have to worry about it.






git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118227 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
rocess.h
14a97ff7ccb8d40fee3c6ff136a2c602819174dd 04-Nov-2010 Sean Callanan <scallanan@apple.com> Re-enabled LLDB's pointer checkers, and moved the
implementation of the Objective-C object checkers
into the Objective-C language runtime.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118226 91177308-0d34-0410-b5e6-96231b3b80d8
bjCLanguageRuntime.h
hreadPlanCallFunction.h
29756d452be39535ded2cff50d9db4df46fe6400 03-Nov-2010 Sean Callanan <scallanan@apple.com> Factored the code that implements breakpoints on
exceptions for different languages out of
ThreadPlanCallFunction and put it into the
appropriate language runtimes.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118200 91177308-0d34-0410-b5e6-96231b3b80d8
anguageRuntime.h
hreadPlanCallFunction.h
94fb5432f10882f8917acb7849abdba7c61277ac 03-Nov-2010 Sean Callanan <scallanan@apple.com> Modified ThreadPlanCallFunction to perform the
exception checks at the right time, and modified
ClangFunction so that it doesn't misinterpret the
stop as a timeout stop.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118189 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
hreadPlanCallFunction.h
07f3d8d674350e5efc7f762f18c82c8c6f2abb10 03-Nov-2010 Sean Callanan <scallanan@apple.com> Modified the thread plan that calls functions to
set breakpoints at the different locations where
an exception could be thrown, so that exceptions
thrown by expressions are properly caught.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118142 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanCallFunction.h
77e9394f0af653ac0842066a9c7766a28d6c6b94 29-Oct-2010 Sean Callanan <scallanan@apple.com> Added a user-settable variable, 'target.expr-prefix',
which holds the name of a file whose contents are
prefixed to each expression. For example, if the file
~/lldb.prefix.header contains:

typedef unsigned short my_type;

then you can do this:

(lldb) settings set target.expr-prefix '~/lldb.prefix.header'
(lldb) expr sizeof(my_type)
(unsigned long) $0 = 2

When the variable is changed, the corresponding file
is loaded and its contents are fetched into a string
that is stored along with the target. This string
is then passed to each expression and inserted into
it during parsing, like this:

typedef unsigned short my_type;

void
$__lldb_expr(void *$__lldb_arg)
{
sizeof(my_type);
}


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@117627 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
7826c8894803dc729f29789ebc038956a94d3e7a 26-Oct-2010 Caroline Tice <ctice@apple.com> First pass at adding logging capabilities for the API functions. At the moment
it logs the function calls, their arguments and the return values. This is not
complete or polished, but I am committing it now, at the request of someone who
really wants to use it, even though it's not really done. It currently does not
attempt to log all the functions, just the most important ones. I will be
making further adjustments to the API logging code over the next few days/weeks.
(Suggestions for improvements are welcome).


Update the Python build scripts to re-build the swig C++ file whenever
the python-extensions.swig file is modified.

Correct the help for 'log enable' command (give it the correct number & type of
arguments).




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@117349 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
hread.h
988ddbcdc1a7f362968a1e3bfcd7fda39e7345ee 26-Oct-2010 Jim Ingham <jingham@apple.com> The call function thread plan should allow internal breakpoints to continue on. Also made stopping
in mid-expression evaluation when we hit a breakpoint/signal work.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@117341 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
8280cbe80c79bc206335831dd732e0f9fb69c519 25-Oct-2010 Jason Molenda <jmolenda@apple.com> Check in the native lldb unwinder.

Not yet enabled as the default unwinder but there are no known
backtrace problems with the code at this point.

Added 'log enable lldb unwind' to help diagnose backtrace problems;
this output needs a little refining but it's a good first step.

eh_frame information is currently read unconditionally - the code
is structured to allow this to be delayed until it's actually needed.
There is a performance hit when you have to parse the eh_frame
information for any largeish executable/library so it's necessary
to avoid if possible.

It's confusing having both the UnwindPlan::RegisterLocation struct
and the RegisterConextLLDB::RegisterLocation struct, I need to rename
one of them.

The writing of registers isn't done in the RegisterConextLLDB subclass
yet; neither is the running of complex DWARF expressions from eh_frame
(e.g. used for _sigtramp on Mac OS X).



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@117256 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
6297a3a5c4d8b61f2429f371bdf207043dbca832 20-Oct-2010 Jim Ingham <jingham@apple.com> Don't cache the public stop reason, since it can change as plan completion gets processed. That means GetStopReason needs to return a shared pointer, not a pointer to the thread's cached version. Also allow the thread plans to get and set the thread private stop reason - that is usually more appropriate for the logic the thread plans need to do.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116892 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanStepOverBreakpoint.h
bd296c661cdbb96f8bc172791441e4c2fc7e71f4 16-Oct-2010 Greg Clayton <gclayton@apple.com> Fixed the UnixSignals class to be able to get a signal by name, short name, or signal number when using:

int32_t UnixSignals::GetSignalNumberFromName (const char *name) const;


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116641 91177308-0d34-0410-b5e6-96231b3b80d8
nixSignals.h
deb391c13cab68fe3d04c824a651d091b3402899 15-Oct-2010 Greg Clayton <gclayton@apple.com> Added short names and descriptions to the UnixSignals class. Also cleaned up
the code a bit.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116561 91177308-0d34-0410-b5e6-96231b3b80d8
nixSignals.h
d168690e51f9020b926d3d0d57dc9a2cfb2095a8 15-Oct-2010 Jim Ingham <jingham@apple.com> Added support for breakpoint conditions. I also had to separate the "run the expression" part of ClangFunction::Execute from the "Gather the expression result" so that in the case of the Breakpoint condition I can move the condition evaluation into the normal thread plan processing.

Also added support for remembering the "last set breakpoint" so that "break modify" will act on the last set breakpoint.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116542 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
topInfo.h
arget.h
hread.h
hreadPlan.h
hreadPlanTestCondition.h
63e24d7aeae8a7feb2aae0581e597b922749d4a1 12-Oct-2010 Jim Ingham <jingham@apple.com> Add a way to temporarily divert events from a broadcaster to a private listener.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116271 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
c12b6b40b93687539b0ca303f64eb77b6af6924d 11-Oct-2010 Greg Clayton <gclayton@apple.com> Added a new test case to test signals with.

Added frame relative frame selection to "frame select". You can now select
frames relative to the current frame (which defaults to zero if the current
frame hasn't yet been set for a thread):

The gdb "up" command can be done as:
(lldb) frame select -r 1
The gdb "down" command can be done as:
(lldb) frame select -r -1

Place the following in your ~/.lldbinit file for "up" and "down":

command alias up frame select -r 1
command alias down frame select -r -1




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@116176 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
a830adbcd63d1995a01e6e18da79893c1426ca43 04-Oct-2010 Greg Clayton <gclayton@apple.com> There are now to new "settings set" variables that live in each debugger
instance:

settings set frame-format <string>
settings set thread-format <string>

This allows users to control the information that is seen when dumping
threads and frames. The default values are set such that they do what they
used to do prior to changing over the the user defined formats.

This allows users with terminals that can display color to make different
items different colors using the escape control codes. A few alias examples
that will colorize your thread and frame prompts are:

settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n'

settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n'

A quick web search for "colorize terminal output" should allow you to see what
you can do to make your output look like you want it.

The "settings set" commands above can of course be added to your ~/.lldbinit
file for permanent use.

Changed the pure virtual
void ExecutionContextScope::Calculate (ExecutionContext&);
To:
void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&);

I did this because this is a class that anything in the execution context
heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell
you what it was really trying to do unless you look at the parameter.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@115485 91177308-0d34-0410-b5e6-96231b3b80d8
xecutionContextScope.h
rocess.h
egisterContext.h
tackFrame.h
arget.h
hread.h
324067bc91877dbbd6ec3a8663914fa3dbb7e3c9 30-Sep-2010 Jim Ingham <jingham@apple.com> Add "-o" option to "expression" which prints the object description if available.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@115115 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
anguageRuntime.h
b66cd074ec097b5b0a6f2ce292f5072aa1217ca6 28-Sep-2010 Jim Ingham <jingham@apple.com> Replace the vestigial Value::GetOpaqueCLangQualType with the more correct Value::GetValueOpaqueClangQualType.

But mostly, move the ObjC Trampoline handling code from the MacOSX dyld plugin to the AppleObjCRuntime classes.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114935 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
anguageRuntime.h
bjCLanguageRuntime.h
bjCObjectPrinter.h
rocess.h
1ebef44c126bd3a615b3ad844c46a82a82efa0e7 27-Sep-2010 Caroline Tice <ctice@apple.com> Create more useful instance names for target, process and thread instances.

Change default 'set' behavior so that all instance settings for the specified variable will be
updated, unless the "-n" ("--no_override") command options is specified.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114808 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
ccd584dccb920cdb028de69950774c3bcdc025ec 23-Sep-2010 Jim Ingham <jingham@apple.com> Add GetSP to the StackFrame.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114674 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
hread.h
642036f22366d47ea8e6f8498bedb92b88f7f79f 23-Sep-2010 Jim Ingham <jingham@apple.com> Committing the skeleton of Language runtime plugin classes.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114620 91177308-0d34-0410-b5e6-96231b3b80d8
PPLanguageRuntime.h
anguageRuntime.h
bjCLanguageRuntime.h
rocess.h
3c9c5eb466869ede185e879d14a47335fb43194d 21-Sep-2010 Sean Callanan <scallanan@apple.com> Removed the hacky "#define this ___clang_this" handler
for C++ classes. Replaced it with a less hacky approach:

- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.

- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.

- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.

- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.

This required the following changes:

- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.

- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.

- ClangUserExpression was extended to perform the
wrapping described above.

- ClangASTSource was changed to revert the changes
required by the hack.

- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.

- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.

A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114384 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
hreadPlanCallFunction.h
bcb5b454767121980d937d2610ba762fdb575c45 20-Sep-2010 Caroline Tice <ctice@apple.com> Make GetInstanceSettingsValue methods take an Error * rather than an Error &,
and have them return a bool to indicate success or not.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114361 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
5bc8c97d62b2e399bd90fb7e00c903d7887412ab 20-Sep-2010 Caroline Tice <ctice@apple.com> Add UserSettings to Target class, making Target settings
the parent of Process settings; add 'default-arch' as a
class-wide setting for Target. Replace lldb::GetDefaultArchitecture
with Target::GetDefaultArchitecture & Target::SetDefaultArchitecture.

Add 'use-external-editor' as user setting to Debugger class & update
code appropriately.

Add Error parameter to methods that get user settings, for easier
reporting of bad requests.

Fix various other minor related bugs.

Fix test cases to work with new changes.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114352 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
hread.h
d0a5a23d734da7a2170802ccd096f53b8a527811 19-Sep-2010 Greg Clayton <gclayton@apple.com> Added code that will allow completely customizable prompts for use in
replacing the "(lldb)" prompt, the "frame #1..." displays when doing
stack backtracing and the "thread #1....". This will allow you to see
exactly the information that you want to see where you want to see it.
This currently isn't hookup up to the prompts yet, but it will be soon.

So what is the format of the prompts? Prompts can contain variables that
have access to the current program state. Variables are text that appears
in between a prefix of "${" and ends with a "}". Some of the interesting
variables include:

// The frame index (0, 1, 2, 3...)
${frame.index}

// common frame registers with generic names
${frame.pc}
${frame.sp}
${frame.fp}
${frame.ra}
${frame.flags}

// Access to any frame registers by name where REGNAME is any register name:
${frame.reg.REGNAME}

// The current compile unit file where the frame is located
${file.basename}
${file.fullpath}

// Function information
${function.name}
${function.pc-offset}

// Process info
${process.file.basename}
${process.file.fullpath}
${process.id}
${process.name}

// Thread info
${thread.id}
${thread.index}
${thread.name}
${thread.queue}
${thread.stop-reason}

// Target information
${target.arch}

// The current module for the current frame (the shared library or executable
// that contains the current frame PC value):
${module.file.basename}
${module.file.fullpath}

// Access to the line entry for where the current frame is when your thread
// is stopped:
${line.file.basename}
${line.file.fullpath}
${line.number}
${line.start-addr}
${line.end-addr}

Many times the information that you might have in your prompt might not be
available and you won't want it to print out if it isn't valid. To take care
of this you can enclose everything that must resolve into a scope. A scope
is starts with '{' and ends with '}'. For example in order to only display
the current file and line number when the information is available the format
would be:

"{ at {$line.file.basename}:${line.number}}"

Broken down this is:

start the scope: "{"

format whose content will only be displayed if all information is available:
"at {$line.file.basename}:${line.number}"

end the scope: "}"

We currently can represent the infomration we see when stopped at a frame:

frame #0: 0x0000000100000e85 a.out`main + 4 at test.c:19

with the following format:

"frame #${frame.index}: ${frame.pc} {${module.file.basename}`}{${function.name}{${function.pc-offset}}{ at ${line.file.basename}:${line.number}}\n"

This breaks down to always print:

"frame #${frame.index}: ${frame.pc} "

only print the module followed by a tick if we have a valid module:

"{${module.file.basename}`}"

print the function name with optional offset:
"{${function.name}{${function.pc-offset}}"

print the line info if it is available:

"{ at ${line.file.basename}:${line.number}}"

then finish off with a newline:

"\n"

Notice you can also put newlines ("\n") and tabs and everything else you
are used to putting in a format string when desensitized with the \ character.

Cleaned up some of the user settings controller subclasses. All of them
do not have any global settings variables and were all implementing stubs
for the get/set global settings variable. Now there is a default version
in UserSettingsController that will do nothing.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114306 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
fe424a92fc6fd92f810d243912461fe028a2b63c 18-Sep-2010 Greg Clayton <gclayton@apple.com> General command line help cleanup:
- All single character options will now be printed together
- Changed all options that contains underscores to contain '-' instead
- Made the help come out a little flatter by showing the long and short
option on the same line.
- Modified the short character for "--ignore-count" options to "-i"



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114265 91177308-0d34-0410-b5e6-96231b3b80d8
ynamicLoader.h
rocess.h
238c0a1e7b733cee539258faa656159c63f9e893 18-Sep-2010 Greg Clayton <gclayton@apple.com> Fixed the way set/show variables were being accessed to being natively
accessed by the objects that own the settings. The previous approach wasn't
very usable and made for a lot of unnecessary code just to access variables
that were already owned by the objects.

While I fixed those things, I saw that CommandObject objects should really
have a reference to their command interpreter so they can access the terminal
with if they want to output usaage. Fixed up all CommandObjects to take
an interpreter and cleaned up the API to not need the interpreter to be
passed in.

Fixed the disassemble command to output the usage if no options are passed
down and arguments are passed (all disassebmle variants take options, there
are no "args only").



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114252 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
0021c97fbd17e38113d2e76b93c94ee05213ee45 16-Sep-2010 Johnny Chen <johnny.chen@apple.com> Undo 114084 and 114087 to unbreak the build for the time being.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114095 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
a2784ee3c8451936d50abf94dcb29527d1a2a85a 16-Sep-2010 Benjamin Kramer <benny.kra@googlemail.com> Turns out CreateInstanceName is duplicated in two other places. Make them static too, sigh.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114087 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
0e81b6475a71b32d1edf30a26487c003cc308bf3 16-Sep-2010 Jim Ingham <jingham@apple.com> Step past prologues when we step into functions.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114055 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInRange.h
49480b158ee907f30afea651d2c81a67b5dbc971 15-Sep-2010 Greg Clayton <gclayton@apple.com> Clear the section list when a our current process is destroyed.

Add missing files that I forgot to checkin.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113902 91177308-0d34-0410-b5e6-96231b3b80d8
ectionLoadList.h
eea264007bc5fb42c8f3239726a9d28ae42e1b7b 15-Sep-2010 Greg Clayton <gclayton@apple.com> Moved the section load list up into the target so we can use the target
to symbolicate things without the need for a valid process subclass.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113895 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
17454cfc6a757305a7d9d4c31313c38981b57b01 15-Sep-2010 Jim Ingham <jingham@apple.com> Add the ability for "ThreadPlanRunToAddress" to run to multiple addresses.
Added the ability to specify a preference for mangled or demangled to Mangled::GetName.
Changed one place where mangled was prefered in GetName.
The Dynamic loader should look up the target of a stub by mangled name if it exists.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113869 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanRunToAddress.h
4ae519666628cca07c194bf677163009cc2e5a8b 11-Sep-2010 Jim Ingham <jingham@apple.com> Move the "Object Description" into the ValueObject, and the add an API to
SBValue to access it. For now this is just the result of ObjC NSPrintForDebugger,
but could be extended. Also store the results of the ObjC Object Printer in a
Stream, not a ConstString.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113660 91177308-0d34-0410-b5e6-96231b3b80d8
bjCObjectPrinter.h
3a4ea24572fad1e22525f8efb718d49d41e30398 10-Sep-2010 Jason Molenda <jmolenda@apple.com> The first part of an lldb native stack unwinder.

The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).

The ObjectFile class now has an UnwindTable object.

The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.

The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.

UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.

Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.

The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.

There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113581 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
f2c330df115cfdaedbf9d359b00f3ebb3cab9887 09-Sep-2010 Caroline Tice <ctice@apple.com> Move the ProcessPlugins enum definition from lldb-enumerations.h to
Process.h; modify the process.plugins settings variable to use the
correct plugin names.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113510 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
004afcb95736e97d071b1dd9b5254800e11e581c 08-Sep-2010 Caroline Tice <ctice@apple.com> Make sure creating a pending instance doesn't also trigger creating a live instance; also make sure creating a
pending instance uses the specified instance name rather than creating a new one; add brackets to instance names
when searching for and removing pending instances.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113370 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hread.h
20594b1b003f63ed34ebafeec37634ee44552339 08-Sep-2010 Jim Ingham <jingham@apple.com> Add a user settings controller to Thread. Then added a step-avoid-regexp setting
which controls whether to stop in a function matching the regexp.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113335 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
c3c24084efb0e1c4734c136532c1e43e9427c912 08-Sep-2010 Jim Ingham <jingham@apple.com> The functions that return the static ConstString names of the settings should be static
as well.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113328 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
69aa5d9a7620a183cdc4da12cc87ea82e2ffcbf9 07-Sep-2010 Greg Clayton <gclayton@apple.com> Added more API to lldb::SBBlock to allow getting the block
parent, sibling and first child block, and access to the
inline function information.

Added an accessor the StackFrame:

Block * lldb_private::StackFrame::GetFrameBlock();

LLDB represents inline functions as lexical blocks that have
inlined function information in them. The function above allows
us to easily get the top most lexical block that defines a stack
frame. When there are no inline functions in function, the block
returned ends up being the top most block for the function. When
the PC is in an inlined funciton for a frame, this will return the
first parent block that has inlined function information. The
other accessor: StackFrame::GetBlock() will return the deepest block
that matches the frame's PC value. Since most debuggers want to display
all variables in the current frame, the Block returned by
StackFrame::GetFrameBlock can be used to retrieve all variables for
the current frame.

Fixed the lldb_private::Block::DumpStopContext(...) to properly
display inline frames a block should display all of its inlined
functions. Prior to this fix, one of the call sites was being skipped.
This is a separate code path from the current default where inlined
functions get their own frames.

Fixed an issue where a block would always grab variables for any
child inline function blocks.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113195 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
6e4c5ce0f697eb9899a54854a2a9004e961b0de2 04-Sep-2010 Caroline Tice <ctice@apple.com> This is a very large commit that completely re-does the way lldb
handles user settable internal variables (the equivalent of set/show
variables in gdb). In addition to the basic infrastructure (most of
which is defined in UserSettingsController.{h,cpp}, there are examples
of two classes that have been set up to contain user settable
variables (the Debugger and Process classes). The 'settings' command
has been modified to be a command-subcommand structure, and the 'set',
'show' and 'append' commands have been moved into this sub-commabnd
structure. The old StateVariable class has been completely replaced
by this, and the state variable dictionary has been removed from the
Command Interpreter. Places that formerly accessed the state variable
mechanism have been modified to access the variables in this new
structure instead (checking the term-width; getting/checking the
prompt; etc.)

Variables are attached to classes; there are two basic "flavors" of
variables that can be set: "global" variables (static/class-wide), and
"instance" variables (one per instance of the class). The whole thing
has been set up so that any global or instance variable can be set at
any time (e.g. on start up, in your .lldbinit file), whether or not
any instances actually exist (there's a whole pending and default
values mechanism to help deal with that).




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113041 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
5205f0b6585a127acc6ed210021abb6091220a89 03-Sep-2010 Greg Clayton <gclayton@apple.com> Fixed the StackFrame to correctly resolve the StackID's SymbolContextScope.

Added extra logging for stepping.

Fixed an issue where cached stack frame data could be lost between runs when
the thread plans read a stack frame.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112973 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
tackID.h
hread.h
hreadList.h
72b7158235500ae6d4b69ed378cbc36bf6e5cbe1 02-Sep-2010 Greg Clayton <gclayton@apple.com> Added a new bool parameter to many of the DumpStopContext() methods that
might dump file paths that allows the dumping of full paths or just the
basenames. Switched the stack frame dumping code to use just the basenames for
the files instead of the full path.

Modified the StackID class to no rely on needing the start PC for the current
function/symbol since we can use the SymbolContextScope to uniquely identify
that, unless there is no symbol context scope. In that case we can rely upon
the current PC value. This saves the StackID from having to calculate the
start PC when the StackFrame::GetStackID() accessor is called.

Also improved the StackID less than operator to correctly handle inlined stack
frames in the same stack.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112867 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackID.h
17dae081d7b88d24a7af6b07c10fc5981f81e2a9 02-Sep-2010 Greg Clayton <gclayton@apple.com> StackFrame objects now own ValueObjects for any frame variables (locals, args,
function statics, file globals and static variables) that a frame contains.
The StackFrame objects can give out ValueObjects instances for
each variable which allows us to track when a variable changes and doesn't
depend on variable names when getting value objects.

StackFrame::GetVariableList now takes a boolean to indicate if we want to
get the frame compile unit globals and static variables.

The value objects in the stack frames can now correctly track when they have
been modified. There are a few more tweaks needed to complete this work. The
biggest issue is when stepping creates partial stacks (just frame zero usually)
and causes previous stack frames not to match up with the current stack frames
because the previous frames only has frame zero. We don't really want to
require that all previous frames be complete since stepping often must check
stack frames to complete their jobs. I will fix this issue tomorrow.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112800 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
f18d91c9bbd01152b29d84ab55ad2f0bbc9baf6c 01-Sep-2010 Sean Callanan <scallanan@apple.com> Added support for dynamic sanity checking in
expressions. Values used by the expression are
checked by validation functions which cause the
program to crash if the values are unsafe.

Major changes:

- Added IRDynamicChecks.[ch], which contains the
core code related to this feature

- Modified CommandObjectExpression to install the
validator functions into the target process.

- Added an accessor to Process that gets/sets the
helper functions


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112690 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
452bf613496c7290c6b7a1a1eb28efbce63fd3b9 31-Aug-2010 Greg Clayton <gclayton@apple.com> Added the ability to disable ASLR (Address Space Layout Randomization). ASLR
is disabled by default, and can be enabled using:

(lldb) set disable-aslr 0



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112616 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
4fb08150367853dae24bb92904356788e919a72f 30-Aug-2010 Greg Clayton <gclayton@apple.com> Clarified the intent of the SymbolContextScope class in the header
documentation. Symbol now inherits from the symbol
context scope so that the StackID can use a "SymbolContextScope *"
instead of a blockID (which could have been the same as some other
blockID from another symbol file).

Modified the stacks that are created on subsequent stops to reuse
the previous stack frame objects which will allow for some internal
optimization using pointer comparisons during stepping.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112495 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackID.h
870a1cdb923ce708d474af357dd1fea3d063ab97 27-Aug-2010 Greg Clayton <gclayton@apple.com> Made it so we update the current frames from the previous frames by doing STL
swaps on the variable list, value object list, and disassembly. This avoids
us having to try and update frame indexes and other things that were getting
out of sync.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112301 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
1d66ef5d31a8326d5495f56b0cfbf2fd1bff67d8 27-Aug-2010 Greg Clayton <gclayton@apple.com> Simplified the StackFrameList class down to a single frames list again
instead of trying to maintain the real frame list (unwind frames) and an
inline frame list. The information is cheap to produce when we already have
looked up a block and was making stack frame uniquing difficult when trying
to use the previous stack when making the current stack.

We now maintain the previous value object lists for common frames between
a previous and current frames so we will be able to tell when variable values
change.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112277 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
65124eac53b7a214906e8931be314e429bbbeb30 27-Aug-2010 Greg Clayton <gclayton@apple.com> Changed the StackID to store its start PC address as a load address instead of
a section offset address.

Fixed up some very inefficient STL code.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112230 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackID.h
c833295baeec641086f536e78050388af36784f8 26-Aug-2010 Jim Ingham <jingham@apple.com> Change "Current" as in GetCurrentThread, GetCurrentStackFrame, etc, to "Selected" i.e. GetSelectedThread. Selected makes more sense, since these are set by some user action (a selection). I didn't change "CurrentProcess" since this is always controlled by the target, and a given target can only have one process, so it really can't be selected.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112221 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
argetList.h
hread.h
hreadList.h
2154da49d2db0b478d54c077d2b3825380a24f4c 26-Aug-2010 Jim Ingham <jingham@apple.com> Add StackFrame::IsInlined.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112217 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
f40e30823926f27e3cb9364f3c8fe2e4be0c7658 26-Aug-2010 Greg Clayton <gclayton@apple.com> Cleaned up the inline stack frame code one more time to prepare for inlined
code stepping. Also we now store the stack frames for the current and previous
stops in the thread in std::auto_ptr objects. When we create a thread stack
frame list we pass the previous frame into it so it can re-use the frames
and maintain will allow for variable changes to be detected. I will implement
the stack frame reuse next.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112152 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackFrameList.h
tackID.h
hread.h
bcfce909e2fb66932472b19706aae002f7734550 25-Aug-2010 Greg Clayton <gclayton@apple.com> The destructor for StackFrameList doesn't need to be virtual as we aren't
subclassing it anywhere.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112010 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
a92d893af2b1790a40fbbd0c237671ab3010345c 25-Aug-2010 Greg Clayton <gclayton@apple.com> Thread no longer needs to be a friend in StackFrameList now that StackFrameList
contains the entire stack backtrace.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112009 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
782b9ccd9f2b290585cd6bb4c1f0cc6cb7e22e15 25-Aug-2010 Greg Clayton <gclayton@apple.com> Cleaned up the inline backtrace code even more by moving all stack backtracing
functionality into StackFrameList. This will allow us to copy the previous
stack backtrace from the previous stop into another variable so we can re-use
as much as possible from the previous stack backtrace.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@112007 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrameList.h
hread.h
32f4fdde0882395aec2ea56d1adcce78759105b7 25-Aug-2010 Greg Clayton <gclayton@apple.com> Fixed another issue with the inline stack frames where if the first frame
has inlined functions that all started at the same address, then the inlined
backtrace would not produce correct stack frames.

Also cleaned up and inlined a lot of stuff in lldb_private::Address.

Added a function to StackFrame to detect if the frame is a concrete frame so
we can detect the difference between actual frames and inlined frames.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@111989 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
hread.h
b04e7a805310f2f2cc77947a8b263de9061617ae 24-Aug-2010 Greg Clayton <gclayton@apple.com> Got a lot of the kinks worked out in the inline support after debugging more
complex inlined examples.

StackFrame classes don't have a "GetPC" anymore, they have "GetFrameCodeAddress()".
This is because inlined frames will have a PC value that is the same as the
concrete frame that owns the inlined frame, yet the code locations for the
frame can be different. We also need to be able to get the real PC value for
a given frame so that variables evaluate correctly. To get the actual PC
value for a frame you can use:

addr_t pc = frame->GetRegisterContext()->GetPC();

Some issues with the StackFrame stomping on its own symbol context were
resolved which were causing the information to change for a frame when the
stack ID was calculated. Also the StackFrame will now correctly store the
symbol context resolve flags for any extra bits of information that were
looked up (if you ask for a block only and you find one, you will alwasy have
the compile unit and function).



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@111964 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
22a6bf31b82dcf47ff6014bc47a99173595f156f 24-Aug-2010 Greg Clayton <gclayton@apple.com> Clear the inline stack frame info when we clean all stack frames.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@111891 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
33ed170599d41fe407a4dcf5f0875c75e1ad1375 24-Aug-2010 Greg Clayton <gclayton@apple.com> Added support for inlined stack frames being represented as real stack frames
which is now on by default. Frames are gotten from the unwinder as concrete
frames, then if inline frames are to be shown, extra information to track
and reconstruct these frames is cached with each Thread and exanded as needed.

I added an inline height as part of the lldb_private::StackID class, the class
that helps us uniquely identify stack frames. This allows for two frames to
shared the same call frame address, yet differ only in inline height.

Fixed setting breakpoint by address to not require addresses to resolve.

A quick example:

% cat main.cpp

% ./build/Debug/lldb test/stl/a.out
Current executable set to 'test/stl/a.out' (x86_64).
(lldb) breakpoint set --address 0x0000000100000d31
Breakpoint created: 1: address = 0x0000000100000d31, locations = 1
(lldb) r
Launching 'a.out' (x86_64)
(lldb) Process 38031 Stopped
* thread #1: tid = 0x2e03, pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280, stop reason = breakpoint 1.1, queue = com.apple.main-thread
277
278 _CharT*
279 _M_data() const
280 -> { return _M_dataplus._M_p; }
281
282 _CharT*
283 _M_data(_CharT* __p)
(lldb) bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
frame #0: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280
frame #1: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_rep() const at /usr/include/c++/4.2.1/bits/basic_string.h:288
frame #2: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::size() const at /usr/include/c++/4.2.1/bits/basic_string.h:606
frame #3: pc = 0x0000000100000d31, where = a.out`main [inlined] operator<< <char, std::char_traits<char>, std::allocator<char> > at /usr/include/c++/4.2.1/bits/basic_string.h:2414
frame #4: pc = 0x0000000100000d31, where = a.out`main + 33 at /Volumes/work/gclayton/Documents/src/lldb/test/stl/main.cpp:14
frame #5: pc = 0x0000000100000d08, where = a.out`start + 52

Each inline frame contains only the variables that they contain and each inlined
stack frame is treated as a single entity.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@111877 91177308-0d34-0410-b5e6-96231b3b80d8
tackFrame.h
tackID.h
hread.h
2f9b9bc9e1718626b008b6408c44bd2f52c9bbbc 18-Aug-2010 Greg Clayton <gclayton@apple.com> Added a Thread accessor to the register context.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@111378 91177308-0d34-0410-b5e6-96231b3b80d8
egisterContext.h
71219089a9896e3c5c307f7465c8f90f2a9f6d68 12-Aug-2010 Jim Ingham <jingham@apple.com> Now that we are using the Unwinder (or Jason's new unwinder when that comes about) all the plugin-specific details of getting stack frames
should be hidden behind that, and the "GetStackFrameAtIndex" and "GetStackFrameCount" algorithms become generic. So I moved them to Thread.cpp.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@110899 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
a48fe1637ec6a381e500633c087f76662e364c20 11-Aug-2010 Sean Callanan <scallanan@apple.com> Added support for persistent variables to the
expression parser. It is now possible to type:

(lldb) expr int $i = 5; $i + 1
(int) 6
(lldb) expr $i + 2
(int) 7

The skeleton for automatic result variables is
also implemented. The changes affect:

- the process, which now contains a
ClangPersistentVariables object that holds
persistent variables associated with it
- the expression parser, which now uses
the persistent variables during variable
lookup
- TaggedASTType, where I loaded some commonly
used tags into a header so that they are
interchangeable between different clients of
the class


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@110777 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
6fb8baa66796cdb23f337dd03272bf15d97fdab9 10-Aug-2010 Jim Ingham <jingham@apple.com> Make breakpoint commands work again. Added a PerformAction to the stop info - actions are run when the
stop event is pulled from the event queue. Then made the StopInfoBreakpoint's PerformAction do the
breakpoint command.
Also fixed the StopInfoBreakpoint's GetDescription so it gets the breakpoint location info, not the breakpoint
site info.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@110637 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
7508e732818c32e1cfeaaf7d1d507fe3834ce9d2 10-Aug-2010 Jim Ingham <jingham@apple.com> Change Target & Process so they can really be initialized with an invalid architecture.
Arrange that this then gets properly set on attach, or when a "file" is set.
Add a completer for "process attach -n".

Caveats: there isn't currently a way to handle multiple processes with the same name. That
will have to wait on a way to pass annotations along with the completion strings.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@110624 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
arget.h
643ee7301b5d4b05c321d906bc0d7ff11f571295 04-Aug-2010 Greg Clayton <gclayton@apple.com> Abtracted the old "lldb_private::Thread::StopInfo" into an abtract class.
This will allow debugger plug-ins to make any instance of "lldb_private::StopInfo"
that can completely describe any stop reason. It also provides a framework for
doing intelligent things with the stop info at important times in the lifetime
of the inferior.

Examples include the signal stop info in StopInfoUnixSignal. It will check with
the process to see that the current action is for the signal. These actions
include wether to stop for the signal, wether the notify that the signal was
hit, and wether to pass the signal along to the inferior process. The
StopInfoUnixSignal class overrides the "ShouldStop()" method of StopInfo and
this allows the stop info to determine if it should stop at the signal or
continue the process.


StopInfo subclasses must override the following functions:

virtual lldb::StopReason
GetStopReason () const = 0;

virtual const char *
GetDescription () = 0;


StopInfo subclasses can override the following functions:


// If the subclass returns "false", the inferior will resume. The default
// version of this function returns "true" which means the default stop
// info will stop the process. The breakpoint subclass will check if
// the breakpoint wants us to stop by calling any installed callback on
// the breakpoint, and also checking if the breakpoint is for the current
// thread. Signals will check if they should stop based off of the
// UnixSignal settings in the process.
virtual bool
ShouldStop (Event *event_ptr);

// Sublasses can state if they want to notify the debugger when "ShouldStop"
// returns false. This would be handy for breakpoints where you want to
// log information and continue and is also used by the signal stop info
// to notify that a signal was received (after it checks with the process
// signal settings).
virtual bool
ShouldNotify (Event *event_ptr)
{
return false;
}

// Allow subclasses to do something intelligent right before we resume.
// The signal class will figure out if the signal should be propagated
// to the inferior process and pass that along to the debugger plug-ins.
virtual void
WillResume (lldb::StateType resume_state)
{
// By default, don't do anything
}


The support the Mach exceptions was moved into the lldb/source/Plugins/Process/Utility
folder and now doesn't polute the lldb_private::Thread class with platform
specific code.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@110184 91177308-0d34-0410-b5e6-96231b3b80d8
topInfo.h
hread.h
7661a98ba99c585034bc60dbe43ad80599cc6dd3 23-Jul-2010 Greg Clayton <gclayton@apple.com> Centralized the Mach exception stop info code by adding it as a first
class citizen on the StopInfo class.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@109235 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
3fd1f36c937575dbf57bae04c7ebaef78d8ecc1d 17-Jul-2010 Stephen Wilson <wilsons@start.ca> Have Process::CreateBreakpointSite return a break_id_t instead of a user_id_t.
Also, update BreakpointLocation::ResolveBreakpointSite to check for invalid
breakpoint ID's using the proper magic constant.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@108598 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
809ab9bcd5eb7aa87fb662a89a327384f892b923 10-Jul-2010 Jim Ingham <jingham@apple.com> Add an "Avoid Frames matching this regular expression" to ThreadPlanStepInRange.
This relies on ThreadPlanStepOut working correctly, which it doesn't currently for Inlined functions, so this feature is only partially useful until we take care of Stepping Out of inlined functions.
Added an option to "thread step-in" to set the avoid regular expression. This is mostly for testing, once the Setting code is redone, we'll move this to a general setting.

git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@108036 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlanStepInRange.h
54e7afa84d945f9137f9372ecde432f9e1a702fc 09-Jul-2010 Greg Clayton <gclayton@apple.com> Merged Eli Friedman's linux build changes where he added Makefile files that
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@108009 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
hreadPlanShouldStopHere.h
hreadSpec.h
704363531ee4877ccc6d35d0702876096f54c67b 01-Jul-2010 Greg Clayton <gclayton@apple.com> Centralized all disassembly into static functions in source/Core/Disassembler.cpp.

Added the ability to read memory from the target's object files when we aren't
running, so disassembling works before you run!

Cleaned up the API to lldb_private::Target::ReadMemory().

Cleaned up the API to the Disassembler to use actual "lldb_private::Address"
objects instead of just an "addr_t". This is nice because the Address objects
when resolved carry along their section and module which can get us the
object file. This allows Target::ReadMemory to be used when we are not
running.

Added a new lldb_private::Address dump style: DumpStyleDetailedSymbolContext
This will show a full breakdown of what an address points to. To see some
sample output, execute a "image lookup --address <addr>".

Fixed SymbolContext::DumpStopContext(...) to not require a live process in
order to be able to print function and symbol offsets.





git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@107350 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
12bec71b323dc520f0e985a86e09c4712559e115 28-Jun-2010 Greg Clayton <gclayton@apple.com> Added function name types to allow us to set breakpoints by name more
intelligently. The four name types we currently have are:

eFunctionNameTypeFull = (1 << 1), // The function name.
// For C this is the same as just the name of the function
// For C++ this is the demangled version of the mangled name.
// For ObjC this is the full function signature with the + or
// - and the square brackets and the class and selector
eFunctionNameTypeBase = (1 << 2), // The function name only, no namespaces or arguments and no class
// methods or selectors will be searched.
eFunctionNameTypeMethod = (1 << 3), // Find function by method name (C++) with no namespace or arguments
eFunctionNameTypeSelector = (1 << 4) // Find function by selector name (ObjC) names


this allows much more flexibility when setting breakoints:

(lldb) breakpoint set --name main --basename
(lldb) breakpoint set --name main --fullname
(lldb) breakpoint set --name main --method
(lldb) breakpoint set --name main --selector

The default:

(lldb) breakpoint set --name main

will inspect the name "main" and look for any parens, or if the name starts
with "-[" or "+[" and if any are found then a full name search will happen.
Else a basename search will be the default.

Fixed some command option structures so not all options are required when they
shouldn't be.

Cleaned up the breakpoint output summary.

Made the "image lookup --address <addr>" output much more verbose so it shows
all the important symbol context results. Added a GetDescription method to
many of the SymbolContext objects for the more verbose output.





git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@107075 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
63094e0bb161580564954dee512955c1c79d3476 23-Jun-2010 Greg Clayton <gclayton@apple.com> Very large changes that were needed in order to allow multiple connections
to the debugger from GUI windows. Previously there was one global debugger
instance that could be accessed that had its own command interpreter and
current state (current target/process/thread/frame). When a GUI debugger
was attached, if it opened more than one window that each had a console
window, there were issues where the last one to setup the global debugger
object won and got control of the debugger.

To avoid this we now create instances of the lldb_private::Debugger that each
has its own state:
- target list for targets the debugger instance owns
- current process/thread/frame
- its own command interpreter
- its own input, output and error file handles to avoid conflicts
- its own input reader stack

So now clients should call:

SBDebugger::Initialize(); // (static function)

SBDebugger debugger (SBDebugger::Create());
// Use which ever file handles you wish
debugger.SetErrorFileHandle (stderr, false);
debugger.SetOutputFileHandle (stdout, false);
debugger.SetInputFileHandle (stdin, true);

// main loop

SBDebugger::Terminate(); // (static function)

SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to
ensure nothing gets destroyed too early when multiple clients might be
attached.

Cleaned up the command interpreter and the CommandObject and all subclasses
to take more appropriate arguments.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106615 91177308-0d34-0410-b5e6-96231b3b80d8
arget.h
argetList.h
5a47e8bcc7277dc3683f2af2aeb9717184e8360c 19-Jun-2010 Jim Ingham <jingham@apple.com> Two changes in this checkin. Added a ThreadPlanKind so that I can do some reasoning based on the kind of thread plan
without having to use RTTI.
Removed the ThreadPlanContinue and replaced with a ShouldAutoContinue query that serves the same purpose. Having to push
another plan to assert that if there's no other indication the target should continue when this plan is popped was flakey
and error prone. This method is more stable, and fixed problems we were having with thread specific breakpoints.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106378 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlan.h
hreadPlanContinue.h
hreadPlanStepOverBreakpoint.h
hreadPlanStepRange.h
649492b3614c11e52a2dbe3693bbdf97efec9ba0 18-Jun-2010 Jim Ingham <jingham@apple.com> Change the Breakpoint & BreakpointLocation GetDescription methods so they call the BreakpointOptions::GetDescription rather
than picking bits out of the breakpoint options. Added BreakpointOptions::GetDescription to do this job. Some more mucking
around to keep the breakpoint listing from getting too verbose.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106262 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadSpec.h
3c7b5b9f83cae58ca366db2bba37dc09485f7dcc 16-Jun-2010 Jim Ingham <jingham@apple.com> Add a "thread specification" class that specifies thread specific breakpoints by name, index, queue or TID.
Push this through all the breakpoint management code. Allow this to be set when the breakpoint is created.
Fix the Process classes so that a breakpoint hit that is not for a particular thread is not reported as a
breakpoint hit event for that thread.
Added a "breakpoint configure" command to allow you to reset any of the thread
specific options (or the ignore count.)


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106078 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadSpec.h
8f5fd6b999b0c9b7398870ccc3ed438d7a6a0830 12-Jun-2010 Greg Clayton <gclayton@apple.com> I have eliminated RTTI from LLDB!

Also added a shell script build phase that fixes the headers in
LLDB.framework.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105899 91177308-0d34-0410-b5e6-96231b3b80d8
hread.h
hreadPlanStepInRange.h
hreadPlanStepOverRange.h
9dd6edde116d93777dae51ec550dee741019487e 09-Jun-2010 Eli Friedman <eli.friedman@gmail.com> More warning/error fixes.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105714 91177308-0d34-0410-b5e6-96231b3b80d8
hreadPlan.h
e28824e0b988221c7eedf8e3d212527d2bdac6a7 09-Jun-2010 Eli Friedman <eli.friedman@gmail.com> And a few more warning/error fixes.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105698 91177308-0d34-0410-b5e6-96231b3b80d8
rocess.h
24943d2ee8bfaa7cf5893e4709143924157a5c1e 08-Jun-2010 Chris Lattner <sabre@nondot.org> Initial checkin of lldb code from internal Apple repo.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105619 91177308-0d34-0410-b5e6-96231b3b80d8
BI.h
ynamicLoader.h
xecutionContext.h
xecutionContextScope.h
bjCObjectPrinter.h
athMappingList.h
rocess.h
egisterContext.h
tackFrame.h
tackFrameList.h
tackID.h
arget.h
argetList.h
hread.h
hreadList.h
hreadPlan.h
hreadPlanBase.h
hreadPlanCallFunction.h
hreadPlanContinue.h
hreadPlanRunToAddress.h
hreadPlanShouldStopHere.h
hreadPlanStepInRange.h
hreadPlanStepInstruction.h
hreadPlanStepOut.h
hreadPlanStepOverBreakpoint.h
hreadPlanStepOverRange.h
hreadPlanStepRange.h
hreadPlanStepThrough.h
hreadPlanStepUntil.h
nixSignals.h
nwind.h