| 008f3dc79c762b7d240b5ad6d4fb148c5cb039ca |
|
18-Jul-2013 |
Jim Ingham <jingham@apple.com> |
This commit does two things. One, it converts the return value of the QueueThreadPlanXXX
plan providers from a "ThreadPlan *" to a "lldb::ThreadPlanSP". That was needed to fix
a bug where the ThreadPlanStepInRange wasn't checking with its sub-plans to make sure they
succeed before trying to proceed further. If the sub-plan failed and as a result didn't make
any progress, you could end up retrying the same failing algorithm in an infinite loop.
<rdar://problem/14043602>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186618 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 52f792329be5db8e38961350589e97e8f2823acd |
|
12-Jul-2013 |
Greg Clayton <gclayton@apple.com> |
Huge change to clean up types.
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186130 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 7c79a27b955432dfd3ad9439640f0af2eccf37b8 |
|
08-May-2013 |
Jim Ingham <jingham@apple.com> |
Figure out the reply to "PlanExplainsStop" once when we stop and then use the cached
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.
Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.
Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--
M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181381 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 89e248f04ecb87d0df4a4b96158c3fac0a3e43c7 |
|
09-Feb-2013 |
Jim Ingham <jingham@apple.com> |
Reworked the way Process::RunThreadPlan and the ThreadPlanCallFunction interoperate to fix problems where
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.
<rdar://problem/12993641>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174793 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 88e3de205708f14431559072ca258899b5ac31cc |
|
03-May-2012 |
Jim Ingham <jingham@apple.com> |
Clean up the usage of "MasterPlan" status in ThreadPlans. Only user-initiated plans
should be MasterPlans that want to stay on the plan stack. So make all plans NOT
MasterPlans by default and then have the SB API's and the CommandObjectThread step
commands set this explicitly.
Also added a "clean up" phase to the Thread::ShouldStop so that if plans get stranded
on the stack, we can remove them. This is done by adding an IsPlanStale method to the
thread plans, and if the plan can know that it is no longer relevant, it returns true,
and the plan and its sub-plans will get discarded.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156101 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 441e3b9e8bed8c67afd5e520966d7ca16579eac4 |
|
01-Mar-2012 |
Jim Ingham <jingham@apple.com> |
Convert the thread plans over from using the stack count to do their logic to using StackID's. This
should be more efficient.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151780 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 1586d9720002e407a3a097baf302de5fa4ca9c1b |
|
17-Dec-2011 |
Jim Ingham <jingham@apple.com> |
Add the ability to capture the return value in a thread's stop info, and print it
as part of the thread format output.
Currently this is only done for the ThreadPlanStepOut.
Add a convenience API ABI::GetReturnValueObject.
Change the ValueObject::EvaluationPoint to BE an ExecutionContextScope, rather than
trying to hand out one of its subsidiary object's pointers. That way this will always
be good.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@146806 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| ad382c523709e86f01bfea27f1991df9afeef2dd |
|
03-Dec-2011 |
Jim Ingham <jingham@apple.com> |
Make the ThreadPlanStepThrough set a backstop breakpoint on the return address from
the function it is being asked to step through, so that even if we get the trampoline
target wrong (for instance) we will still not lose control.
The other fix here is to tighten up the handling of the case where the current plan
doesn't explain the stop, but a plan above us does. In that case, if the plan that
does explain the stop says it is done, we need to clean up the plans below it and
continue on with our processing.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@145740 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 43d390617a5a03ff42894fa0ad121b9335fa4dbc |
|
15-Oct-2011 |
Jim Ingham <jingham@apple.com> |
Make "next" and "step-out" work when in stepping over or out of inlined functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142031 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| b344843f75ef893762c93fd0a22d2d45712ce74d |
|
24-Mar-2011 |
Greg Clayton <gclayton@apple.com> |
Fixed the LLDB build so that we can have private types, private enums and
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128239 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 1ebdcc7789aac1ef30ad6dcd485dff86c63136ad |
|
21-Jan-2011 |
Greg Clayton <gclayton@apple.com> |
Added support for stepping out of a frame. If you have 10 stack frames, and you
select frame #3, you can then do a step out and be able to go directly to the
frame above frame #3!
Added StepOverUntil and StepOutOfFrame to the SBThread API to allow more powerful
stepping.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123970 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 6507dd90b5d27662537caee49a3a3cc236f85a53 |
|
10-Dec-2010 |
Jim Ingham <jingham@apple.com> |
Changing the ObjC find method implementation to use a ClangUtilityFunction inserted into the target. Consolidate all the
logic for finding the target of a method dispatch into this function, insert & call it. Gets calls to super, and all the
fixup & fixedup variants working properly. Also gets the class from the object so that we step through KVO wrapper methods
into the actual user code.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121437 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 745ac7a5826fe7c392007941a4046bfb1a8dff81 |
|
11-Nov-2010 |
Jim Ingham <jingham@apple.com> |
Add ThreadPlanTracer class to allow instruction step tracing of execution.
Also changed eSetVarTypeBool to eSetVarTypeBoolean to make it consistent with eArgTypeBoolean.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118824 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|
| 24943d2ee8bfaa7cf5893e4709143924157a5c1e |
|
08-Jun-2010 |
Chris Lattner <sabre@nondot.org> |
Initial checkin of lldb code from internal Apple repo.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105619 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/include/lldb/Target/ThreadPlanStepOut.h
|