| ca4c37b4874dfcbc2001852624644fa2a2c30f2c |
|
26-Jul-2013 |
Sean Callanan <scallanan@apple.com> |
Fixed several problems with watchpoint expressions.
- First, the watchpoint size was being cast to the
wrong type. This is primarily cosmetic, but
annoying.
- Second, the options for the watchpoint command
were not being initialized correctly, which led
to the watchpoint size sometimes having absurdly
large values. This caused watchpoints to fail to
be set in some cases.
<rdar://problem/12658775>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@187169 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 52f792329be5db8e38961350589e97e8f2823acd |
|
12-Jul-2013 |
Greg Clayton <gclayton@apple.com> |
Huge change to clean up types.
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@186130 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| bf1bec6263157c86b5df7d6b19090571ed7885a3 |
|
02-Jul-2013 |
Jim Ingham <jingham@apple.com> |
Use the "last created watchpoint" rather than asserting on watchpoint commands passing no watchpoint ID.
<rdar://problem/14327560>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185406 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| be2f9090cf7d64a0f021cbc4036f4172baba1cd2 |
|
18-Jun-2013 |
Jim Ingham <jingham@apple.com> |
We were getting an assert because somebody was making a watchpoint that was
neither read nor write. Tighten up the checking so this isn't possible.
<rdar://problem/14111167>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@184245 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 9caf151a9da17c0791d0b642c25c001217222224 |
|
14-Feb-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13207948>
"watchpoint set expression" fails if "--" is present without any option. Made this command match exactly what "expression" does.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@175136 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 36da2aa6dc5ad9994b638ed09eb81c44cc05540b |
|
25-Jan-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13069948>
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173463 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| ea0bb4d45c14447a2fe9be9f4bd8e79a84513537 |
|
09-Jan-2013 |
Greg Clayton <gclayton@apple.com> |
Expanded the flags that can be set for a command object in lldb_private::CommandObject. This list of available flags are:
enum
{
//----------------------------------------------------------------------
// eFlagRequiresTarget
//
// Ensures a valid target is contained in m_exe_ctx prior to executing
// the command. If a target doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidTargetDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidTargetDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresTarget = (1u << 0),
//----------------------------------------------------------------------
// eFlagRequiresProcess
//
// Ensures a valid process is contained in m_exe_ctx prior to executing
// the command. If a process doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidProcessDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidProcessDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresProcess = (1u << 1),
//----------------------------------------------------------------------
// eFlagRequiresThread
//
// Ensures a valid thread is contained in m_exe_ctx prior to executing
// the command. If a thread doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidThreadDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidThreadDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresThread = (1u << 2),
//----------------------------------------------------------------------
// eFlagRequiresFrame
//
// Ensures a valid frame is contained in m_exe_ctx prior to executing
// the command. If a frame doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidFrameDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidFrameDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresFrame = (1u << 3),
//----------------------------------------------------------------------
// eFlagRequiresRegContext
//
// Ensures a valid register context (from the selected frame if there
// is a frame in m_exe_ctx, or from the selected thread from m_exe_ctx)
// is availble from m_exe_ctx prior to executing the command. If a
// target doesn't exist or is invalid, the command will fail and
// CommandObject::GetInvalidRegContextDescription() will be returned as
// the error. CommandObject subclasses can override the virtual function
// for GetInvalidRegContextDescription() to provide custom strings when
// needed.
//----------------------------------------------------------------------
eFlagRequiresRegContext = (1u << 4),
//----------------------------------------------------------------------
// eFlagTryTargetAPILock
//
// Attempts to acquire the target lock if a target is selected in the
// command interpreter. If the command object fails to acquire the API
// lock, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagTryTargetAPILock = (1u << 5),
//----------------------------------------------------------------------
// eFlagProcessMustBeLaunched
//
// Verifies that there is a launched process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBeLaunched = (1u << 6),
//----------------------------------------------------------------------
// eFlagProcessMustBePaused
//
// Verifies that there is a paused process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBePaused = (1u << 7)
};
Now each command object contains a "ExecutionContext m_exe_ctx;" member variable that gets initialized prior to running the command. The validity of the target objects in m_exe_ctx are checked to ensure that any target/process/thread/frame/reg context that are required are valid prior to executing the command. Each command object also contains a Mutex::Locker m_api_locker which gets used if eFlagTryTargetAPILock is set. This centralizes a lot of checking code that was previously and inconsistently implemented across many commands.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@171990 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| d891f9b872103235cfd2ed452c6f14a4394d9b3a |
|
05-Dec-2012 |
Daniel Malea <daniel.malea@intel.com> |
Fix Linux build warnings due to redefinition of macros:
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169341 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 6475c42148a8ea1ca86e5db465db7eca742d897d |
|
04-Dec-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/12798131>
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169189 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 5f35a4be95aed0e5b2cb36f7d785bcbfc67284ae |
|
29-Nov-2012 |
Daniel Malea <daniel.malea@intel.com> |
Resolve printf formatting warnings on Linux:
- use macros from inttypes.h for format strings instead of OS-specific types
Patch from Matt Kopec!
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168945 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 9e376625d6354d77cd6240007f0d42034dd3f1ee |
|
23-Oct-2012 |
Jim Ingham <jingham@apple.com> |
Watchpoints remember the type of the expression or variable they were set with, and use
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166472 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 47beabb1386be44e3f90dbc30a0b22c23b93a4dc |
|
16-Oct-2012 |
Jim Ingham <jingham@apple.com> |
Add the ability to set timeout & "run all threads" options both from the "expr" command and from
the SB API's that evaluate expressions.
<rdar://problem/12457211>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@166062 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 0b5a40cfc980f687f065321586239d3a8365d87d |
|
14-Sep-2012 |
Sean Callanan <scallanan@apple.com> |
Extended the "watchpoint set variable" code to
support watchpoints on globals.
<rdar://problem/12297238>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163913 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 560c51483461697b2f78c145d70d0cd285012c4d |
|
11-Sep-2012 |
Filipe Cabecinhas <me@filcab.net> |
Change the NULL to a 0 since we need a uint32_t
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163625 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| d27026e46d8430fb451d85ac161a8492e1930245 |
|
05-Sep-2012 |
Enrico Granata <egranata@apple.com> |
Implementing an Options class for EvaluateExpression() in order to make the signature more compact and make it easy to 'just run an expression'
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@163239 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 9e98559420d8c7c248b0c75b48db65ffd878402b |
|
13-Aug-2012 |
Johnny Chen <johnny.chen@apple.com> |
rdar://problem/12007576
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@161785 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| f3ec4617297810223deb545cb68214ca4dd8009c |
|
10-Aug-2012 |
Johnny Chen <johnny.chen@apple.com> |
rdar://problem/11457143 [ER] need "watchpoint command ..."
Add 'watchpoint command add/delete/list' to lldb, plus two .py test files.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@161638 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 4a379b1194f3e6b308cd6e80b45d6ca5dd0aafd7 |
|
17-Jul-2012 |
Greg Clayton <gclayton@apple.com> |
Ran the static analyzer on the codebase and found a few things.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160338 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 6cca9695637b27bd583eaae310d5c09dede7cc49 |
|
17-Jul-2012 |
Enrico Granata <egranata@apple.com> |
<rdar://problem/11672978> Fixing an issue where an ObjC object might come out without a description because the expression used to obtain it would timeout before running to completion
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160326 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| b3a1a2bba41281ba56a99fe64887a8a04760784c |
|
14-Jul-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/11870357>
Allow "frame variable" to find ivars without the need for "this->" or "self->".
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@160211 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 26a24b73aadfa2c6eb3121419a9db47c09bd30ed |
|
29-Jun-2012 |
Johnny Chen <johnny.chen@apple.com> |
Make 'watchpoint set' default to write instead of read_write.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@159455 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 1032089fb6aa3be226d204df5db6306e119d8fb8 |
|
20-Jun-2012 |
Johnny Chen <johnny.chen@apple.com> |
Chnage VerifyWatchpointIDs() from a static function to a class function to be called from other source files.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158751 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| da26bd203cbb104291b39891febf7481794f205f |
|
08-Jun-2012 |
Jim Ingham <jingham@apple.com> |
Make raw & parsed commands subclasses of CommandObject rather than having the raw version implement an
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.
Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.
Made the CommandObject flags work for raw as well as parsed commands.
Made "expr" use the flags so that it requires you to be paused to run "expr".
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158235 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| e4b5ec026712d56f3cc259900f13158c47cb4d73 |
|
05-Jun-2012 |
Johnny Chen <johnny.chen@apple.com> |
rdar://problem/11597911
Fix confusing error message about "expression did not evaluate to an address" when doing 'watchpoint set expression".
Instead of using 0 as the fail_value when invoking ValueObject::GetValueAsUnsigned(), modify the API to take an addition
bool pointer (defaults to NULL) to indicate success/failure of value conversion.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158016 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 3f883496e92fce5011f6bf585af3ac6d1cddb64f |
|
05-Jun-2012 |
Johnny Chen <johnny.chen@apple.com> |
rdar://problem/11584012
Refactorings of watchpoint creation APIs so that SBTarget::WatchAddress(), SBValue::Watch(), and SBValue::WatchPointee()
now take an additional 'SBError &error' parameter (at the end) to contain the reason if there is some failure in the
operation. Update 'watchpoint set variable/expression' commands to take advantage of that.
Update existing test cases to reflect the API change and add test cases to verify that the SBError mechanism works for
SBTarget::WatchAddress() by passing an invalid watch_size.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157964 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 1e0e73a403ffbbeafa7a98e958909b56be929cf0 |
|
04-Jun-2012 |
Johnny Chen <johnny.chen@apple.com> |
Give more explicit error messages when watchpoint creation command (watchpoint set) fails,
like number of supported hardware watchpoints reached or the watch size is not allowed.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157948 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 7cbdcfb0cefcfd877b507ff2d83e51a1bde3fcc7 |
|
23-May-2012 |
Johnny Chen <johnny.chen@apple.com> |
Add the capability to display the number of supported hardware watchpoints to the "watchpoint list" command.
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157345 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 5564b58f8faea2877a005d5fe680aef91a735a18 |
|
27-Apr-2012 |
Johnny Chen <johnny.chen@apple.com> |
Clarify "watchpoint set" help text.
rdar://problem/11327790
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@155694 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 8c1af79e3d88f26e7569e895c5bd70a0de87d3bc |
|
09-Feb-2012 |
Johnny Chen <johnny.chen@apple.com> |
Add error handling for missing option terminator "--" and a test scenario for it.
Also fix a logic error for a missing return stmt. Oops.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150195 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 42404d284b22750851b26ae9a4ab42101f673089 |
|
08-Feb-2012 |
Johnny Chen <johnny.chen@apple.com> |
After discussions with Jim and Greg, modify the 'watchpoint set' command to become a mutiword command
with subcommand 'expression' and 'variable'. The first subcommand is for supplying an expression to
be evaluated into an address to watch for, while the second is for watching a variable.
'watchpoint set expression' is a raw command, which means that you need to use the "--" option terminator
to end the '-w' or '-x' option processing and to start typing your expression.
Also update several test cases to comply and add a couple of test cases into TestCompletion.py,
in particular, test that 'watchpoint set ex' completes to 'watchpoint set expression ' and that
'watchpoint set var' completes to 'watchpoint set variable '.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150109 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 73ac3b57fc7349503a55456a1d11cac392c24e6b |
|
08-Feb-2012 |
Johnny Chen <johnny.chen@apple.com> |
Update comment.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150036 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 6183fccd61b67e814d9e7e85b25516a28edfe864 |
|
08-Feb-2012 |
Johnny Chen <johnny.chen@apple.com> |
Refine the 'watchpoint set' command to now require either the '-v' option (for watching of a variable) or
the '-e' option (for watching of an address) to be present.
Update some existing test cases with the required option and add some more test cases.
Since the '-v' option takes <variable-name> and the '-e' option takes <expr> as the command arg,
the existing infrastructure for generating the option usage can produce confusing help message,
like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
The solution adopted is to provide an extra member field to the struct CommandArgumentData called
(uint32_t)arg_opt_set_association, whose purpose is to link this particular argument data with some
option set(s). Also modify the signature of CommandObject::GetFormattedCommandArguments() to:
GetFormattedCommandArguments (Stream &str, uint32_t opt_set_mask = LLDB_OPT_SET_ALL)
it now takes an additional opt_set_mask which can be used to generate a filtered formatted command
args for help message.
Options::GenerateOptionUsage() impl is modified to call the GetFormattedCommandArguments() appropriately.
So that the help message now looks like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name>
rdar://problem/10703256
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@150032 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| bc2bb1ee832d411aca69edcec6be3bec48af686d |
|
31-Jan-2012 |
Johnny Chen <johnny.chen@apple.com> |
Trivial indentation change.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149297 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 55a2d5a49d82fcfc0fe72825293f6c04d1970e21 |
|
30-Jan-2012 |
Johnny Chen <johnny.chen@apple.com> |
Add "watch set" command as a more general interface in conjunction with "frame var -w".
Also add test cases for watching a variable as well as a location expressed as an expression.
o TestMyFirstWatchpoint.py:
Modified to test "watchpoint set -w write global".
o TestWatchLocationWithWatchSet.py:
Added to test "watchpoint set -w write -x 1 g_char_ptr + 7" where a contrived example program
with several threads is supposed to only access the array index within the range [0..6], but
there's some misbehaving thread writing past the range.
rdar://problem/10701761
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149280 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 9c236733d43e6250c8a5671a438f4a2afeb9c0b2 |
|
26-Oct-2011 |
Greg Clayton <gclayton@apple.com> |
Cleaned up many error codes. For any who is filling in error strings into
lldb_private::Error objects the rules are:
- short strings that don't start with a capitol letter unless the name is a
class or anything else that is always capitolized
- no trailing newline character
- should be one line if possible
Implemented a first pass at adding "--gdb-format" support to anything that
accepts format with optional size/count.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142999 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 712a628dde2f4f786389feecf7e06e59f0853c75 |
|
17-Oct-2011 |
Johnny Chen <johnny.chen@apple.com> |
Add a commnad to set a condition for a watchpoint. Example:
watchpoint modify -c 'global==5'
modifies the last created watchpoint so that the condition expression
is evaluated at the stop point to decide whether we should proceed with
the stopping.
Also add SBWatchpont::SetCondition(const char *condition) to set condition
programmatically.
Test cases to come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142227 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| ecd4feb5111432d2878e95461220c720cb2d24c8 |
|
14-Oct-2011 |
Johnny Chen <johnny.chen@apple.com> |
SBValue::Watch() and SBValue::WatchPointee() are now the official API for creating
a watchpoint for either the variable encapsulated by SBValue (Watch) or the pointee
encapsulated by SBValue (WatchPointee).
Removed SBFrame::WatchValue() and SBFrame::WatchLocation() API as a result of that.
Modified the watchpoint related test suite to reflect the change.
Plus replacing WatchpointLocation with Watchpoint throughout the code base.
There are still cleanups to be dome. This patch passes the whole test suite.
Check it in so that we aggressively catch regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141925 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| e14cf4e7dc9d561224f744807b70a8ab91a8b36d |
|
05-Oct-2011 |
Johnny Chen <johnny.chen@apple.com> |
Add capability to set ignore count for watchpoint on the command line:
watchpoint ignore -i <count> [<watchpt-id | watchpt-id-list>]
Add tests of watchpoint ignore_count for command line as well as API.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@141217 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| cacedfb1c5db4da1cbbcf6326486ced8174f9b64 |
|
23-Sep-2011 |
Johnny Chen <johnny.chen@apple.com> |
Watchpoint IDs and ID Ranges are not quite the same as Breakpoint IDs and ID Ranges.
Add eArgTypeWatchpointID and eArgTypeWatchpointIDRange to the CommandArgumentType enums and
modify the signature of CommandObject::AddIDsArgumentData() from:
AddIDsArgumentData(CommandArgumentEntry &arg)
to:
AddIDsArgumentData(CommandArgumentEntry &arg, CommandArgumentType ID, CommandArgumentType IDRange)
to accommodate.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140346 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|
| 01acfa76010b8db2e77016c144963c4dd70f1392 |
|
22-Sep-2011 |
Johnny Chen <johnny.chen@apple.com> |
Add initial implementation of watchpoint commands for list, enable, disable, and delete.
Test cases to be added later.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140322 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectWatchpoint.cpp
|