| e3f9bfdfe3d09ef089f2aef3fb8701c8721f6f45 |
|
21-May-2013 |
Greg Clayton <gclayton@apple.com> |
Added a test case that verifies that LLDB can debug across a process exec'ing itself into a new program. This currently is only enabled for Darwin since we exec from 64 bit to 32 bit and vice versa for 'x86_64' targets.
This can easily be adapted for linux and other platforms, but I didn't want to break any buildbots by assuming it will work.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@182428 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 36da2aa6dc5ad9994b638ed09eb81c44cc05540b |
|
25-Jan-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13069948>
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173463 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 77611de815190f0df41d710edff14596ebd7a69f |
|
28-Sep-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/12398225>
Improve performance of StringExtractor::GetHexS8().
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@164852 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 9e2c8eac7c01e4bd40367fc675b9a481db9e3fb5 |
|
07-Apr-2012 |
Greg Clayton <gclayton@apple.com> |
Removed redundant isxdigit checks and added the ability to GetHexU8() so it can extract an 8 bit hex value if one is available. It will set EOF if "set_eof_on_fail" is true or if out of data. This allows a string decoder to grab a string without losing the last part of the packet with a packet like "414243,abc" (it can extract "ABC" and leave the file position set to the comma).
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154239 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 24bc5d9bfad2a1c562c27e7cf37e1c56d85c45e7 |
|
30-Mar-2011 |
Greg Clayton <gclayton@apple.com> |
Many improvements to the Platform base class and subclasses. The base Platform
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128563 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| c71899ef308e6134d1b0ca5f30cbc64414855e1a |
|
18-Jan-2011 |
Greg Clayton <gclayton@apple.com> |
Thread safety changes in debugserver and also in the process GDB remote plugin.
I added support for asking if the GDB remote server supports thread suffixes
for packets that should be thread specific (register read/write packets) because
the way the GDB remote protocol does it right now is to have a notion of a
current thread for register and memory reads/writes (set via the "$Hg%x" packet)
and a current thread for running ("$Hc%x"). Now we ask the remote GDB server
if it supports adding the thread ID to the register packets and we enable
that feature in LLDB if supported. This stops us from having to send a bunch
of packets that update the current thread ID to some value which is prone to
error, or extra packets.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123762 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 4862fa2f3db6967464cd65a2c77b2e55de3da5ff |
|
08-Jan-2011 |
Greg Clayton <gclayton@apple.com> |
Modified the stop reply packet to be able to send the thread name using the
new "hexname" key for the "key:value;" duple that is part of the packet. This
allows for thread names to contain special characters such as $ # : ; + -
Debugserver now detects if the thread name contains special characters and
sends the chars in hex format if needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123053 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| f553b51fd8e202a355500cb30b5e18ce96c0211d |
|
09-Jun-2010 |
Eli Friedman <eli.friedman@gmail.com> |
Add a couple missing includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105719 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|
| 24943d2ee8bfaa7cf5893e4709143924157a5c1e |
|
08-Jun-2010 |
Chris Lattner <sabre@nondot.org> |
Initial checkin of lldb code from internal Apple repo.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105619 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Utility/StringExtractor.h
|