| 2e67f06149ff649fb6f8782bad041d3d9124685e |
|
16-Jul-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 6d00ab04302df257cb3092b2b31b4eac42e77569
6d00ab0 nl80211: Ensure nl_preq unregistration on driver deinit
71a0e39 P2P: Make unrecognized vendor elements available in P2P_PEER
86bd36f Add generic mechanism for adding vendor elements into frames
Change-Id: I392072a37d8dbfc92769082b60f052f7095466b6
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 4582d2a5dd8180c52eb95b1100fb183b9a289708 |
|
28-Feb-2014 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 06c7b7f0b5f4deed675a7b81e33830311da7339a
06c7b7f HS 2.0R2: Fix temporary network disabling in Deauth Req case
c5c2d94 P2P: Cancel offchannel TX wait on PD Response TX status
1578796 TDLS: Work around interop issues with supported operating class
b7fb98f Interworking: Fix already-connected check to verify network priority
7c373ac Interworking: Fix last-network preference to not override priority
f54e924 HS 2.0R2: Fix req_conn_capab example
Change-Id: I17953fc05421bc5d454f4081fbfe303f4bf2d6fd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 051af73b8f8014eff33330aead0f36944b3403e6 |
|
22-Oct-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 538922a628d4f5403b9a96b171a59235bcb3d921
538922a dbus: Add boolean AllowRoam option to Scan() method options dictionary
c6f5dec Don't start second scan when changing scan interval
cd3b070 nl80211: Fix DFS radar event parsing
2b72df6 nl80211: Free BSS structure even if netdev does not exists
41cc50d nl80211: Update send_action_cookie on AP-offchannel-TX path
313424d GAS: Add support for multiple pending queries for the same destination
cbc5484 GAS: Do not start new scan operation during an ongoing GAS query
c377514 GAS: Delay GAS query Tx while scanning/connecting
24c694b GAS: Delay GAS query Tx while another query is in progress
7255983 WPS: Clear after_wps from number of new locations
73b54d6 P2P: Fix Operating Channel in Invitation Request for operating group
dc46fd6 P2P: Cancel offchannel TX wait on Invitation Response RX
0c92963 D-Bus: Clean up debug print for P2P invitation result
8d82c21 P2P: Fix PD retry channel on join-a-group case
d285888 P2P: Add GO BSS entry details to debug log on join-a-group
512629a P2P: Accept Invitation Response non-success without Channel List
e241b1b eap_proxy: Fix IMSI fetch for home vs. visited network determination
db13605 EAP-AKA/AKA' peer: Allow external USIM processing to be used
569ccf7 EAP-SIM peer: Allow external SIM processing to be used
84dc137 hlr_auc_gw: Add GSM-AUTH-REQ command
a5d44ac EAP peer: Add framework for external SIM/USIM processing
7e8bc7d eapol_test: Initialize BSS lists
bceb843 Send CTRL-RSP command response before processing EAPOL update
b607796 eapol_test: Fix external EAP request mechanism
94de082 eapol_test: Initialize wpa_s->global to fix ctrl_iface
f07bba3 Android: Add dfs.c into build
0cf0af2 WNM: Set Disassoc Imminent flag in ESS Disassoc Imminent frame
f47c145 Interworking: Add required_roaming_consortium parameter for credentials
a83e574 GAS: Update timeout from TX status handler
e88060e HTTP server: Allow TCP socket to be reused
9bc3386 Add test option for specifying hardcoded BSS Load element
9c7e43a Define BSS Load element id
56f5af4 Interworking: Add support for QoS Mapping functionality for the STA
850e1c2 atheros: Add support for QoS Mapping configuration
c551700 Interworking: Add support for QoS Mapping functionality for the AP
ac1bc54 Interworking: Add domain_suffix_match for credentials
463c8ff Interworking: Add support for multiple home FQDNs
01f809c Add AAA server domain name suffix matching constraint
be7963b OpenSSL: Fix code indentation in OCSP processing
899cc14 hostapd: Add support for DFS with 160 MHz channel width
6de0e0c Mark DFS functions static and rename them
58b73e3 hostapd: DFS with 40/80 MHz channel width support
846de15 DFS: Add more parameters to radar events
04e8003 nl80211: Use struct hostapd_freq_params with start_dfs_cac
72c753d hostapd: Split hostapd_set_freq to helper function
e76da50 hostapd: Add AP DFS support
Change-Id: Ie9ed4662ba6d81e6d8b14bccb29ffa192becf0f2
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| b6e9aaf735990dc64cdb6efccc03d076768eabf3 |
|
20-May-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit d5b559b6418c2bd09663e0d09e93a6592357fdce
d5b559b WNM: Add disassociation timeout processing for ESS_DISASSOC
f65f539 GAS: Reduce query timeout to two seconds
7a56af5 GAS: Assign new dialog token even if previous one is free
9e1ecab GAS: Ignore replays if previous frag_id without dropping GAS session
fa7ae95 Add test code for fetching the last configured GTK
576bce9 P2P: Direct global ctrl_iface commands automatically for P2P
c4bf83a P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
7793c95 Clean up AP-STA-CONNECTED/DISCONNECTED prints
92c4465 P2P: Mark P2P events global (not specific to interface)
ed496f1 P2P: Clean up debug prints
710ae9a P2P: Move p2p_find stopped event message into p2p_supplicant.c
47bfe49 Add wpa_msg_global() for global events
214e428 Allow global ctrl_iface monitors
89c7ac5 wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
faf9a85 Add band option (2.4 vs. 5) for filtering scans
b83b1b2 Android: Clarify keystore include directories
6f1127c Android: Add a top level Android.mk
d2a9e2c Abstract and Android sockets for global ctrl_iface
6fd5cea wpa_cli: Allow global interface to be used in interactive mode
2925756 wpa_supplicant: Add -G argument to specify global ctrl group
cf3bebf Allow global ctrl_iface to be used for per-interface commands
058c863 FT RRB: Fix a memory leak on error path
Change-Id: I32a4afb43894167a30c4b0df18fd4846a2945c7c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 4b06059785b935dd1f4f09314e4e12c417d2c6a4 |
|
30-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b57b560034f1bb1ad3a3892228940dde97323c0e
b57b560 wpa_supplicant: Default to nl80211 instead of wext
ee28f08 hostapd: Add more messages for error paths
61d2ce2 hostapd: Reject configuration file without interface parameter
a8a7890 Clear extra_blacklist_count on FLUSH command
c646862 WPS ER: Allow UPnP interface to be forced
728d971 Use status code 17 (unable to handle new STA) on max-STA limitation
5e24dc8 Add dup_binstr() to help common binary string tasks
8b44ad7 Use os_zalloc() instead of os_malloc() + os_memset()
2c48211 FT RRB: Validate os_malloc() return value before using it
7ca902b Make vlan_file optional if dynamic_vlan is used
bdb112d Add bitfield routines
04382f7 NFC: Add no waiting and no multiple operations options for scripts
fe90496 WPS: Fix AP auto configuration on config token generation
28fcfb6 NFC: Increase wpa_cli command buffer size
8f7a6dd WPS NFC: Allow Device Password ID override for selected registrar
aaecb69 WPS: Use generic MAC Address attribute builder
9ccd916 P2P: Clean up channel--frequency conversion functions
e864c0a Use a common frequency to channel conversion function
02db75b FT: Reset FT flag upon STA deauthentication
7800d45 P2P: Set P2P_DEV_PEER_WAITING_RESPONSE from TX status callback
d78d3c6 EAP peer: Add check before calling getSessionId method
dd57970 Disable network temporarily on repeated connection failures
Change-Id: If8078d5c1ff40ea806e844543cf6f2bf9d24b7ac
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 444d567b27731d8572ef37697dd12fd1c37c2f24 |
|
01-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 17b8995cf5813d7c027cd7a6884700e791d72392
17b8995 Interworking: Try to use same BSS entry for storing GAS results
3db5439 Optimize Extended Capabilities element to be of minimal length
8cd6b7b hostapd/wpa_s: Use driver's extended capabilities
acb5464 Add ctrl_iface command FLUSH for clearing wpa_supplicant state
97236ce WPS: Skip rescanning after provisioning if AP was configured
4342326 Add ignore_old_scan_res configuration parameter
9599ccc WPS: Clear after_wps on new WPS connection
702621e WPS: Use latest updated BSS entry if multiple BSSID matches found
ab547b5 WPS: Add more helpful debug for invalid WPS_REG command parsing
a679c0f WPS: Allow hostapd process to control independent WPS interfaces
ccdff94 WPS AP: Add support for reconfiguration with in-memory config
8970bae nl80211: Use nla_nest_start/end instead of nla_put_nested
558d69e P2P: Omit P2P Group Info in case of no connected peers
65a32cd AP: Fix infinite loop in WPA state machine when out of random bytes
a5f61b2 Fix OLBC non-HT AP detection to check channel
69554d7 ap_list: Remove unused functions
08c99ca ap_list: Remove unused iteration list pointers
6b16917 ap_list: Remove unused fields
66f1f75 P2P: Fix provision discovery response handling in some cases
2f9b66d Extend ROAM command to handle multiple SSIDs per BSS
Change-Id: I46002b1d3bbf6e376c2ae09bcb2c824c54805bbd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 37d4d6a4efea4ef4f864347ac8ed8d62a9e19f90 |
|
18-Mar-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 52728dcd25b5074fb7c0493a8155f096089ad6d0
P2P: Stop P2P_PD_DURING_FIND wait on PD Response RX
P2P: Postpone P2P scan only if station mode scan is pending
Use special scan result processing steps only on requesting interface
P2P: Re-start P2P operation if station mode scanning is stopped
P2P: Use common function for re-starting P2P scan after station scan
Change-Id: I62bb738a912483647606de1a5bd5357346ebd8f9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| f86232838cf712377867cb42417c1613ab5dc425 |
|
20-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b618a469c42120e984ab1c85ed6058504d1fca78
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Sat Feb 16 19:54:09 2013 +0200
Interworking: Select highest priority cred if multiple matches
Interworking: Select highest priority cred if multiple matches
GAS server: Fix a regression in GAS server callback
hostapd: Fix Max SP Length derivation from QoS Info
nl80211: Configure STA Capabilities and Extended Capabilities
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Fix build without CONFIG_WPS_NFC
WPS: Add support for NFC handover select generation with wpa_supplicant
WPS: Update NFC connection handover documentation
WPS: Add support for config token generation with wpa_supplicant
WPS: Allow password token to be written with nfcpy
WPS: Use pre-configured NFC password token instead of overriding it
TDLS: Pass peer's Capability and Ext Capability info during sta_add
TDLS: Pass peer's HT Capability and QOS information during sta_add
nl80211: Add debug prints for STA add/set operations
TDLS: Fix add/set STA operation
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Allow Device Password to be changed from M1 to M2
WPS: Fix wps_reg nfc-pw option
TDLS: Tear down peers when disconnecting from the AP
P2P: Do not use old scan result data for peer discovery
Use more accurate timestamps for scan results
P2P: Postpone P2P-DEVICE-FOUND if config_methods not known
P2P: Do not allow peer update to clear config_methods
WPS: Report NFC connection handover completion differently
P2P: Avoid concurrent scans during all steps of group formation
P2P: Cancel group formation timeout on group removal (on client)
WPS: Change listen time to match nfcpy default (250 ms)
WPS: Report only the carrier record from NFC to wpa_supplicant
WPS: Fetch only the carrier record from wpa_supplicant for NFC
WPS: Update nfcpy script to support AP mode NFC connection handover
WPS: Add command for fetching carrier record for NFC handover
WPS: Clean up debug prints with nfcpy
WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
WPS: Configure logging to show nfcpy log message
WPS: Add an example python script for NFC operations with hostapd
hostapd: Do not change HT40 capability due to OBSS scan
dbus: Add missing signal description for WPS (7)
EAP peer: Add Session-Id derivation to more EAP methods
EAP peer: Add Session-Id derivation
EAP-IKEV2 server: Fix invalid memory freeing operation
eap_proxy: Add a dummy implementation for compilation testing
eap_proxy: Add mechanism for allowing EAP methods to be offloaded
Android: Allow setgroups to be overridden from build configuration
P2P: Send p2p_stop_find event on failure to start pending p2p_find
P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled
Capability matching for 60 GHz band
nl80211: Add ctrl_iface message for AP mode connection rejection
P2P: Allow local configuration to use 5 GHz band 40 MHz channels
Fix BSS RANGE command for no exact id match cases
Change-Id: Iac9284bba31db40911aecc3adf2843c9b1576db1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| a54fa5fb807eaeff45464139b5a7759f060cec68 |
|
15-Jan-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit dc013f1e37df3462085cf01a13f0c432f146ad7a
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue Jan 15 12:03:29 2013 +0200
eapol_test: Remove unnecessary header file inclusion
- P2P: Send P2P-FIND-STOPPED event in the new continue-search states
- P2P: Add some more details on Service Query TLV format
- P2P: Use the same Dialog Token value for every GO Negotiation retry
- P2P: Publish more connected clients info in Probe Response frames
- P2P: Fix some memory leaks in p2p_add_device()
- P2P: Use the same Dialog Token value for every PD retry
- P2P: Document operating channel selection functions
- P2P: Always re-select operating channel if not hard coded
- P2P: Do not allow re-selection of GO channel if forced_freq in use
- P2P: Set FORCE_FREQ flag as part of p2p_prepare_channel()
- P2P: Share a single function for GO channel selection
- P2P: Prefer operating channels where HT40 is possible
- P2P: Be more careful with wpa_config_update_psk() call
- P2P: Allow PSK to be used instead of passphrase for persistent GO
- P2P: Consider age for the P2P scan results
- Move some P2P offchannel operations to offchannel.c
- P2P: Add more complete description of p2p_cancel
- P2P: Allow p2p_cancel to be used to stop p2p_connect-join operation
- Interworking changes
- WNM changes
- WPS changes
- SAE changes
Change-Id: I38b847d3460066cc58aecbcf67266bfcff1d344e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| d5e4923d04122f81300fa68fb07d64ede28fd44d |
|
04-Dec-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f5f37d3a4fc2df2a24676b4f95afca15ed793cba
Author: Jouni Malinen <j@w1.fi>
Date: Sun Nov 25 22:05:32 2012 +0200
Fix REAUTHENTICATE command after PMKSA caching
The current PMKSA cache entry needs to be clear to allow EAPOL
reauthentication to be started in case this association used PMKSA
caching.
- Remove old WPS_OOB NCF
- WPS: Add preliminary NFC connection handover support for Enrollee
- WPS: Reenable the networks disabled during wpa_wpas_reassoc
- P2P: Avoid multi-channel scans when they are not needed
- P2P: Allow discoverable interval for p2p_find to be configured
- P2P: Allow all channels with multi-channel concurrency
- Bonjour changes
- Remove disassociate
- HS 2.0 changes
- Add preliminary support for using SQLite for eap_user database
- Add SAE support
- Add disallow_aps parameter to disallow BSSIDs/SSIDs
Change-Id: I85358a05b39d46b8db49acdad667e771c580b05c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 91c40cdce17424d9a4718876becf0b7811cf68f2 |
|
25-Sep-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: P2P-related fixes
- P2P: Show own channel list in debug log
- P2P: Allow peer to propose channel in invitation process
- P2P: Clear sta_scan_pending on group removal
- P2P: Fix ignoring of PD Response due to dialog token mismatch
BUG: 7226065, 7231289
Change-Id: Iacb0f85d80f63bcdf311ccc0d29d0c282a0c0576
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 61d9df3e62aaa0e87ad05452fcb95142159a17b6 |
|
30-Aug-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 29-Aug-2012 TOT
commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Fri Mar 2 22:31:04 2012 +0200
WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Change-Id: I9d63acce719b982c02e589bb59602382e82988c8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT
commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300
WPS SSDP: Fix socket leaks on error paths
Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 497c1d5e50162d6b3c1cce5dbd9c5fd9da69aaef |
|
22-Jul-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
Add P2P support for BRCM CFG80211 driver
Change-Id: Iafec4bedbd33836d0a64e7ea054d8a46ef8ec204
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 75ecf5267604f166b85a7ee2cf0d9cb682966680 |
|
28-Jun-2011 |
Jouni Malinen <jouni@qca.qualcomm.com> |
Accumulative patch from commit 20a0b03debef66cc57b0c34a05f8be5229be907c
atheros: Fix auth_alg configuration for static WEP
nl80211: Implement set_rate_sets for non-hostapd AP case
nl80211: Enable more AP callbacks for non-hostapd AP mode
nl80211: Re-order functions to group AP/hostapd specific code
Remove compiler warning for non-P2P builds
random: Add support for maintaining internal entropy store over restarts
Fix a compiler warning on WPS-AP-without-UPnP builds
P2P: Retry provision discovery requests in IDLE state
P2P: Add callback for provision discovery failure
P2P: Add wpas_notify_p2p_provision_discovery()
P2P: Add group started notification
DBus: Move wpas_dbus_new_decompose_object_path()
DBus: Refactor array adding, add binary arrays
DBus: Add support for P2P primitives
DBus: Fix some typos on comments
Fix CONFIG_AP=y build without CONFIG_P2P=y
Fix non-P2P D-Bus build
nl80211: Add support for driver-based PMKSA cache
P2P: Start GO without extra scan step
Remove a compiler warning on uninitialized variable
Add EVENT_RX_ACTION handler for hostapd
Fix hostapd build without NEED_AP_MLME=y
Fix AP selection to check privacy mismatch and IBSS with WPA/RSN IE
bsd: Fix set_key() sequence number endian issue
Add a copyright and license statement for a radiotap header file
Use nl80211 as an example instead of WEXT
Add notes for CONFIG_WPS_ER build configuration option
Fix CONFIG_NO_WPA_PASSPHRASE=y build
hostapd: Don't mask out non-symmetric STA HT caps
P2P: Enable P2P capability advertisement on D-Bus
P2P: Update D-Bus network object semantics during group formation
P2P: Show P2P peer signal level in D-Bus P2P device properties
P2P: Fix P2P device signal level type in D-Bus
P2P: Add dissasoc_low_ack in P2P device properties
P2P: More complete persistent group management over D-Bus
P2P: Add WpsFailed signal in P2P D-Bus
P2P: Update listen and operating channel from P2P D-Bus
P2P: Fix WpsFailed signal in P2P D-Bus
atheros: Fix glibc 'invalid pointer' error when WPA_TRACE is enabled
Clear WPA and EAPOL state machine config pointer on network removal
20a0b03debef66cc57b0c34a05f8be5229be907c
Change-Id: I2b83bf86ba9c7a9a218638be7b4de31d209cdde1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_pd.c
|