1This is a dump from Google's source control system of the change
2that removed UCS-2 support from RE2.  As the explanation below
3says, UCS-2 mode is fundamentally at odds with things like ^ and $,
4so it never really worked very well.  But if you are interested in using
5it without those operators, it did work for that.  It assumed that the
6UCS-2 data was in the native host byte order.
7
8If you are interested in adding UCS-2 mode back, this patch might
9be a good starting point.
10
11
12Change 12780686 by rsc@rsc-re2 on 2009/09/16 15:30:15
13
14	Retire UCS-2 mode.
15	
16	I added it as an experiment for V8, but it
17	requires 2-byte lookahead to do completely,
18	and RE2 has 1-byte lookahead (enough for UTF-8)
19	as a fairly deep fundamental assumption,
20	so it did not support ^ or $.
21
22==== re2/bitstate.cc#2 - re2/bitstate.cc#3 ====
23re2/bitstate.cc#2:314,321 - re2/bitstate.cc#3:314,319
24      cap_[0] = p;
25      if (TrySearch(prog_->start(), p))  // Match must be leftmost; done.
26        return true;
27-     if (prog_->flags() & Regexp::UCS2)
28-       p++;
29    }
30    return false;
31  }
32==== re2/compile.cc#17 - re2/compile.cc#18 ====
33re2/compile.cc#17:95,101 - re2/compile.cc#18:95,100
34  // Input encodings.
35  enum Encoding {
36    kEncodingUTF8 = 1,  // UTF-8 (0-10FFFF)
37-   kEncodingUCS2,     // UCS-2 (0-FFFF), native byte order
38    kEncodingLatin1,    // Latin1 (0-FF)
39  };
40  
41re2/compile.cc#17:168,176 - re2/compile.cc#18:167,172
42    void AddRuneRangeLatin1(Rune lo, Rune hi, bool foldcase);
43    void AddRuneRangeUTF8(Rune lo, Rune hi, bool foldcase);
44    void Add_80_10ffff();
45-   void AddRuneRangeUCS2(Rune lo, Rune hi, bool foldcase);
46-   void AddUCS2Pair(uint8 lo1, uint8 hi1, bool fold1,
47-                    uint8 lo2, uint8 hi2, bool fold2);
48  
49    // New suffix that matches the byte range lo-hi, then goes to next.
50    Inst* RuneByteSuffix(uint8 lo, uint8 hi, bool foldcase, Inst* next);
51re2/compile.cc#17:475,481 - re2/compile.cc#18:471,477
52  
53  // Converts rune range lo-hi into a fragment that recognizes
54  // the bytes that would make up those runes in the current
55- // encoding (Latin 1, UTF-8, or UCS-2).
56+ // encoding (Latin 1 or UTF-8).
57  // This lets the machine work byte-by-byte even when
58  // using multibyte encodings.
59  
60re2/compile.cc#17:488,496 - re2/compile.cc#18:484,489
61      case kEncodingLatin1:
62        AddRuneRangeLatin1(lo, hi, foldcase);
63        break;
64-     case kEncodingUCS2:
65-       AddRuneRangeUCS2(lo, hi, foldcase);
66-       break;
67    }
68  }
69  
70re2/compile.cc#17:503,581 - re2/compile.cc#18:496,501
71    AddSuffix(RuneByteSuffix(lo, hi, foldcase, NULL));
72  }
73  
74- // Test whether 16-bit values are big or little endian.
75- static bool BigEndian() {
76-   union {
77-     char byte[2];
78-     int16 endian;
79-   } u;
80- 
81-   u.byte[0] = 1;
82-   u.byte[1] = 2;
83-   return u.endian == 0x0102;
84- }
85- 
86- void Compiler::AddUCS2Pair(uint8 lo1, uint8 hi1, bool fold1,
87-                            uint8 lo2, uint8 hi2, bool fold2) {
88-   Inst* ip;
89-   if (reversed_) {
90-     ip = RuneByteSuffix(lo1, hi1, fold1, NULL);
91-     ip = RuneByteSuffix(lo2, hi2, fold2, ip);
92-   } else {
93-     ip = RuneByteSuffix(lo2, hi2, fold2, NULL);
94-     ip = RuneByteSuffix(lo1, hi1, fold1, ip);
95-   }
96-   AddSuffix(ip);
97- }
98- 
99- void Compiler::AddRuneRangeUCS2(Rune lo, Rune hi, bool foldcase) {
100-   if (lo > hi || lo > 0xFFFF)
101-     return;
102-   if (hi > 0xFFFF)
103-     hi = 0xFFFF;
104- 
105-   // We'll assemble a pattern assuming big endian.
106-   // If the machine isn't, tell Cat to reverse its arguments.
107-   bool oldreversed = reversed_;
108-   if (!BigEndian()) {
109-     reversed_ = !oldreversed;
110-   }
111- 
112-   // Split into bytes.
113-   int lo1 = lo >> 8;
114-   int lo2 = lo & 0xFF;
115-   int hi1 = hi >> 8;
116-   int hi2 = hi & 0xFF;
117- 
118-   if (lo1 == hi1) {
119-     // Easy case: high bits are same in both.
120-     // Only do ASCII case folding on the second byte if the top byte is 00.
121-     AddUCS2Pair(lo1, lo1, false, lo2, hi2, lo1==0 && foldcase);
122-   } else {
123-     // Harder case: different second byte ranges depending on first byte.
124- 
125-     // Initial fragment.
126-     if (lo2 > 0) {
127-       AddUCS2Pair(lo1, lo1, false, lo2, 0xFF, lo1==0 && foldcase);
128-       lo1++;
129-     }
130- 
131-     // Trailing fragment.
132-     if (hi2 < 0xFF) {
133-       AddUCS2Pair(hi1, hi1, false, 0, hi2, false);
134-       hi1--;
135-     }
136- 
137-     // Inner ranges.
138-     if (lo1 <= hi1) {
139-       AddUCS2Pair(lo1, hi1, false, 0, 0xFF, false);
140-     }
141-   }
142- 
143-   // Restore reverse setting.
144-   reversed_ = oldreversed;
145- }
146- 
147  // Table describing how to make a UTF-8 matching machine
148  // for the rune range 80-10FFFF (Runeself-Runemax).
149  // This range happens frequently enough (for example /./ and /[^a-z]/)
150re2/compile.cc#17:707,716 - re2/compile.cc#18:627,634
151  
152  Frag Compiler::Literal(Rune r, bool foldcase) {
153    switch (encoding_) {
154-     default:  // UCS-2 or something new
155-       BeginRange();
156-       AddRuneRange(r, r, foldcase);
157-       return EndRange();
158+     default:
159+       return kNullFrag;
160  
161      case kEncodingLatin1:
162        return ByteRange(r, r, foldcase);
163re2/compile.cc#17:927,934 - re2/compile.cc#18:845,850
164  
165    if (re->parse_flags() & Regexp::Latin1)
166      c.encoding_ = kEncodingLatin1;
167-   else if (re->parse_flags() & Regexp::UCS2)
168-     c.encoding_ = kEncodingUCS2;
169    c.reversed_ = reversed;
170    if (max_mem <= 0) {
171      c.max_inst_ = 100000;  // more than enough
172re2/compile.cc#17:983,993 - re2/compile.cc#18:899,905
173      c.prog_->set_start_unanchored(c.prog_->start());
174    } else {
175      Frag dot;
176-     if (c.encoding_ == kEncodingUCS2) {
177-       dot = c.Cat(c.ByteRange(0x00, 0xFF, false), c.ByteRange(0x00, 0xFF, false));
178-     } else {
179-       dot = c.ByteRange(0x00, 0xFF, false);
180-     }
181+     dot = c.ByteRange(0x00, 0xFF, false);
182      Frag dotloop = c.Star(dot, true);
183      Frag unanchored = c.Cat(dotloop, all);
184      c.prog_->set_start_unanchored(unanchored.begin);
185==== re2/nfa.cc#8 - re2/nfa.cc#9 ====
186re2/nfa.cc#8:426,432 - re2/nfa.cc#9:426,431
187    const char* bp = context.begin();
188    int c = -1;
189    int wasword = 0;
190-   bool ucs2 = prog_->flags() & Regexp::UCS2;
191  
192    if (text.begin() > context.begin()) {
193      c = text.begin()[-1] & 0xFF;
194re2/nfa.cc#8:492,498 - re2/nfa.cc#9:491,497
195        // If there's a required first byte for an unanchored search
196        // and we're not in the middle of any possible matches,
197        // use memchr to search for the byte quickly.
198-       if (!ucs2 && !anchored && first_byte_ >= 0 && runq->size() == 0 &&
199+       if (!anchored && first_byte_ >= 0 && runq->size() == 0 &&
200            p < text.end() && (p[0] & 0xFF) != first_byte_) {
201          p = reinterpret_cast<const char*>(memchr(p, first_byte_,
202                                                   text.end() - p));
203re2/nfa.cc#8:505,526 - re2/nfa.cc#9:504,514
204          flag = Prog::EmptyFlags(context, p);
205        }
206  
207-       // In UCS-2 mode, if we need to start a new thread,
208-       // make sure to do it on an even boundary.
209-       if(ucs2 && runq->size() == 0 &&
210-           (p - context.begin()) % 2 && p < text.end()) {
211-         p++;
212-         flag = Prog::EmptyFlags(context, p);
213-       }
214- 
215        // Steal match storage (cleared but unused as of yet)
216        // temporarily to hold match boundaries for new thread.
217-       // In UCS-2 mode, only start the thread on a 2-byte boundary.
218-       if(!ucs2 || (p - context.begin()) % 2 == 0) {
219-         match_[0] = p;
220-         AddToThreadq(runq, start_, flag, p, match_);
221-         match_[0] = NULL;
222-       }
223+       match_[0] = p;
224+       AddToThreadq(runq, start_, flag, p, match_);
225+       match_[0] = NULL;
226      }
227  
228      // If all the threads have died, stop early.
229==== re2/parse.cc#22 - re2/parse.cc#23 ====
230re2/parse.cc#22:160,167 - re2/parse.cc#23:160,165
231      status_(status), stacktop_(NULL), ncap_(0) {
232    if (flags_ & Latin1)
233      rune_max_ = 0xFF;
234-   else if (flags & UCS2)
235-     rune_max_ = 0xFFFF;
236    else
237      rune_max_ = Runemax;
238  }
239re2/parse.cc#22:365,387 - re2/parse.cc#23:363,374
240  bool Regexp::ParseState::PushCarat() {
241    if (flags_ & OneLine) {
242      return PushSimpleOp(kRegexpBeginText);
243-   } else {
244-     if (flags_ & UCS2) {
245-       status_->set_code(kRegexpUnsupported);
246-       status_->set_error_arg("multiline ^ in UCS-2 mode");
247-       return false;
248-     }
249-     return PushSimpleOp(kRegexpBeginLine);
250    }
251+   return PushSimpleOp(kRegexpBeginLine);
252  }
253  
254  // Pushes a \b or \B onto the stack.
255  bool Regexp::ParseState::PushWordBoundary(bool word) {
256-   if (flags_ & UCS2) {
257-     status_->set_code(kRegexpUnsupported);
258-     status_->set_error_arg("\\b or \\B in UCS-2 mode");
259-     return false;
260-   }
261    if (word)
262      return PushSimpleOp(kRegexpWordBoundary);
263    return PushSimpleOp(kRegexpNoWordBoundary);
264re2/parse.cc#22:397,407 - re2/parse.cc#23:384,389
265      bool ret = PushSimpleOp(kRegexpEndText);
266      flags_ = oflags;
267      return ret;
268-   }
269-   if (flags_ & UCS2) {
270-     status_->set_code(kRegexpUnsupported);
271-     status_->set_error_arg("multiline $ in UCS-2 mode");
272-     return false;
273    }
274    return PushSimpleOp(kRegexpEndLine);
275  }
276==== re2/re2.cc#34 - re2/re2.cc#35 ====
277re2/re2.cc#34:79,86 - re2/re2.cc#35:79,84
278        return RE2::ErrorBadUTF8;
279      case re2::kRegexpBadNamedCapture:
280        return RE2::ErrorBadNamedCapture;
281-     case re2::kRegexpUnsupported:
282-       return RE2::ErrorUnsupported;
283    }
284    return RE2::ErrorInternal;
285  }
286re2/re2.cc#34:122,130 - re2/re2.cc#35:120,125
287        break;
288      case RE2::Options::EncodingLatin1:
289        flags |= Regexp::Latin1;
290-       break;
291-     case RE2::Options::EncodingUCS2:
292-       flags |= Regexp::UCS2;
293        break;
294    }
295  
296==== re2/re2.h#36 - re2/re2.h#37 ====
297re2/re2.h#36:246,252 - re2/re2.h#37:246,251
298      ErrorBadUTF8,            // invalid UTF-8 in regexp
299      ErrorBadNamedCapture,    // bad named capture group
300      ErrorPatternTooLarge,    // pattern too large (compile failed)
301-     ErrorUnsupported,        // unsupported feature (in UCS-2 mode)
302    };
303  
304    // Predefined common options.
305re2/re2.h#36:570,576 - re2/re2.h#37:569,574
306  
307      enum Encoding {
308        EncodingUTF8 = 1,
309-       EncodingUCS2,      // 16-bit Unicode 0-FFFF only
310        EncodingLatin1
311      };
312  
313==== re2/regexp.cc#15 - re2/regexp.cc#16 ====
314re2/regexp.cc#15:324,333 - re2/regexp.cc#16:324,329
315  // the regexp that remains after the prefix.  The prefix might
316  // be ASCII case-insensitive.
317  bool Regexp::RequiredPrefix(string *prefix, bool *foldcase, Regexp** suffix) {
318-   // Don't even bother for UCS-2; it's time to throw that code away.
319-   if (parse_flags_ & UCS2)
320-     return false;
321- 
322    // No need for a walker: the regexp must be of the form
323    // 1. some number of ^ anchors
324    // 2. a literal char or string
325==== re2/regexp.h#20 - re2/regexp.h#21 ====
326re2/regexp.h#20:187,193 - re2/regexp.h#21:187,192
327    kRegexpBadPerlOp,          // bad perl operator
328    kRegexpBadUTF8,            // invalid UTF-8 in regexp
329    kRegexpBadNamedCapture,    // bad named capture
330-   kRegexpUnsupported,        // unsupported operator
331  };
332  
333  // Error status for certain operations.
334re2/regexp.h#20:307,316 - re2/regexp.h#21:306,314
335                             //   \Q and \E to disable/enable metacharacters
336                             //   (?P<name>expr) for named captures
337                             //   \C to match any single byte
338-     UCS2         = 1<<10,  // Text is in UCS-2, regexp is in UTF-8.
339-     UnicodeGroups = 1<<11, // Allow \p{Han} for Unicode Han group
340+     UnicodeGroups = 1<<10, // Allow \p{Han} for Unicode Han group
341                             //   and \P{Han} for its negation.
342-     NeverNL      = 1<<12,  // Never match NL, even if the regexp mentions
343+     NeverNL      = 1<<11,  // Never match NL, even if the regexp mentions
344                             //   it explicitly.
345  
346      // As close to Perl as we can get.
347==== re2/testing/backtrack.cc#4 - re2/testing/backtrack.cc#5 ====
348re2/testing/backtrack.cc#4:134,141 - re2/testing/backtrack.cc#5:134,139
349      cap_[0] = p;
350      if (Visit(prog_->start(), p))  // Match must be leftmost; done.
351        return true;
352-     if (prog_->flags() & Regexp::UCS2)
353-       p++;
354    }
355    return false;
356  }
357==== re2/testing/tester.cc#12 - re2/testing/tester.cc#13 ====
358re2/testing/tester.cc#12:144,154 - re2/testing/tester.cc#13:144,152
359  static ParseMode parse_modes[] = {
360    { single_line,                   "single-line"          },
361    { single_line|Regexp::Latin1,    "single-line, latin1"  },
362-   { single_line|Regexp::UCS2,     "single-line, ucs2"   },
363    { multi_line,                    "multiline"            },
364    { multi_line|Regexp::NonGreedy,  "multiline, nongreedy" },
365    { multi_line|Regexp::Latin1,     "multiline, latin1"    },
366-   { multi_line|Regexp::UCS2,      "multiline, ucs2"     },
367  };
368  
369  static string FormatMode(Regexp::ParseFlags flags) {
370re2/testing/tester.cc#12:179,189 - re2/testing/tester.cc#13:177,185
371    RegexpStatus status;
372    regexp_ = Regexp::Parse(regexp_str, flags, &status);
373    if (regexp_ == NULL) {
374-     if (status.code() != kRegexpUnsupported) {
375-       LOG(INFO) << "Cannot parse: " << CEscape(regexp_str_)
376-                 << " mode: " << FormatMode(flags);
377-       error_ = true;
378-     }
379+     LOG(INFO) << "Cannot parse: " << CEscape(regexp_str_)
380+               << " mode: " << FormatMode(flags);
381+     error_ = true;
382      return;
383    }
384    prog_ = regexp_->CompileToProg(0);
385re2/testing/tester.cc#12:230,237 - re2/testing/tester.cc#13:226,231
386      RE2::Options options;
387      if (flags & Regexp::Latin1)
388        options.set_encoding(RE2::Options::EncodingLatin1);
389-     else if (flags & Regexp::UCS2)
390-       options.set_encoding(RE2::Options::EncodingUCS2);
391      if (kind_ == Prog::kLongestMatch)
392        options.set_longest_match(true);
393      re2_ = new RE2(re, options);
394re2/testing/tester.cc#12:281,379 - re2/testing/tester.cc#13:275,280
395      delete re2_;
396  }
397  
398- // Converts UTF-8 string in text into UCS-2 string in new_text.
399- static bool ConvertUTF8ToUCS2(const StringPiece& text, StringPiece* new_text) {
400-   const char* p = text.begin();
401-   const char* ep = text.end();
402-   uint16* q = new uint16[ep - p];
403-   uint16* q0 = q;
404- 
405-   int n;
406-   Rune r;
407-   for (; p < ep; p += n) {
408-     if (!fullrune(p, ep - p)) {
409-       delete[] q0;
410-       return false;
411-     }
412-     n = chartorune(&r, p);
413-     if (r > 0xFFFF) {
414-       delete[] q0;
415-       return false;
416-     }
417-     *q++ = r;
418-   }
419-   *new_text = StringPiece(reinterpret_cast<char*>(q0), 2*(q - q0));
420-   return true;
421- }
422- 
423- // Rewrites *sp from being a pointer into text8 (UTF-8)
424- // to being a pointer into text16 (equivalent text but in UCS-2).
425- static void AdjustUTF8ToUCS2(const StringPiece& text8, const StringPiece& text16,
426-                               StringPiece *sp) {
427-   if (sp->begin() == NULL && text8.begin() != NULL)
428-     return;
429- 
430-   int nrune = 0;
431-   int n;
432-   Rune r;
433-   const char* p = text8.begin();
434-   const char* ep = text8.end();
435-   const char* spbegin = NULL;
436-   const char* spend = NULL;
437-   for (;;) {
438-     if (p == sp->begin())
439-       spbegin = text16.begin() + sizeof(uint16)*nrune;
440-     if (p == sp->end())
441-       spend = text16.begin() + sizeof(uint16)*nrune;
442-     if (p >= ep)
443-       break;
444-     n = chartorune(&r, p);
445-     p += n;
446-     nrune++;
447-   }
448-   if (spbegin == NULL || spend == NULL) {
449-     LOG(FATAL) << "Error in AdjustUTF8ToUCS2 "
450-                << CEscape(text8) << " "
451-                << (int)(sp->begin() - text8.begin()) << " "
452-                << (int)(sp->end() - text8.begin());
453-   }
454-   *sp = StringPiece(spbegin, spend - spbegin);
455- }
456- 
457- // Rewrites *sp from begin a pointer into text16 (UCS-2)
458- // to being a pointer into text8 (equivalent text but in UTF-8).
459- static void AdjustUCS2ToUTF8(const StringPiece& text16, const StringPiece& text8,
460-                               StringPiece* sp) {
461-   if (sp->begin() == NULL)
462-     return;
463- 
464-   int nrune = 0;
465-   int n;
466-   Rune r;
467-   const char* p = text8.begin();
468-   const char* ep = text8.end();
469-   const char* spbegin = NULL;
470-   const char* spend = NULL;
471-   for (;;) {
472-     if (nrune == (sp->begin() - text16.begin())/2)
473-       spbegin = p;
474-     if (nrune == (sp->end() - text16.begin())/2)
475-       spend = p;
476-     if (p >= ep)
477-       break;
478-     n = chartorune(&r, p);
479-     p += n;
480-     nrune++;
481-   }
482-   if (text8.begin() != NULL && (spbegin == NULL || spend == NULL)) {
483-     LOG(FATAL) << "Error in AdjustUCS2ToUTF8 "
484-                << CEscape(text16) << " "
485-                << (int)(sp->begin() - text16.begin()) << " "
486-                << (int)(sp->end() - text16.begin());
487-   }
488-   *sp = StringPiece(spbegin, spend - spbegin);
489- }
490- 
491  // Runs a single search using the named engine type.
492  // This interface hides all the irregularities of the various
493  // engine interfaces from the rest of this file.
494re2/testing/tester.cc#12:393,411 - re2/testing/tester.cc#13:294,300
495  
496    StringPiece text = orig_text;
497    StringPiece context = orig_context;
498-   bool ucs2 = false;
499  
500-   if ((flags() & Regexp::UCS2) && type != kEnginePCRE) {
501-     if (!ConvertUTF8ToUCS2(orig_context, &context)) {
502-       result->skipped = true;
503-       return;
504-     }
505- 
506-     // Rewrite context to refer to new text.
507-     AdjustUTF8ToUCS2(orig_context, context, &text);
508-     ucs2 = true;
509-   }
510- 
511    switch (type) {
512      default:
513        LOG(FATAL) << "Bad RunSearch type: " << (int)type;
514re2/testing/tester.cc#12:557,577 - re2/testing/tester.cc#13:446,451
515      }
516    }
517  
518-   // If we did UCS-2 matching, rewrite the matches to refer
519-   // to the original UTF-8 text.
520-   if (ucs2) {
521-     if (result->matched) {
522-       if (result->have_submatch0) {
523-         AdjustUCS2ToUTF8(context, orig_context, &result->submatch[0]);
524-       } else if (result->have_submatch) {
525-         for (int i = 0; i < nsubmatch; i++) {
526-           AdjustUCS2ToUTF8(context, orig_context, &result->submatch[i]);
527-         }
528-       }
529-     }
530-     delete[] context.begin();
531-   }
532- 
533    if (!result->matched)
534      memset(result->submatch, 0, sizeof result->submatch);
535  }
536re2/testing/tester.cc#12:596,617 - re2/testing/tester.cc#13:470,475
537    return true;
538  }
539  
540- // Check whether text uses only Unicode points <= 0xFFFF
541- // (in the BMP).
542- static bool IsBMP(const StringPiece& text) {
543-   const char* p = text.begin();
544-   const char* ep = text.end();
545-   while (p < ep) {
546-     if (!fullrune(p, ep - p))
547-       return false;
548-     Rune r;
549-     p += chartorune(&r, p);
550-     if (r > 0xFFFF)
551-       return false;
552-   }
553-   return true;
554- }
555- 
556  // Runs a single test.
557  bool TestInstance::RunCase(const StringPiece& text, const StringPiece& context,
558                             Prog::Anchor anchor) {
559re2/testing/tester.cc#12:619,625 - re2/testing/tester.cc#13:477,483
560    Result correct;
561    RunSearch(kEngineBacktrack, text, context, anchor, &correct);
562    if (correct.skipped) {
563-     if (regexp_ == NULL || !IsBMP(context))  // okay to skip in UCS-2 mode
564+     if (regexp_ == NULL)
565        return true;
566      LOG(ERROR) << "Skipped backtracking! " << CEscape(regexp_str_)
567                 << " " << FormatMode(flags_);
568