control.in revision f52c1753d41cfb02779ead0afea48ec2c1c8ed57
1define(MULTIARCH_HEADERS,ifdef(`DO_MULTIARCH', 2Multi-Arch: same 3Pre-Depends: ${misc:Pre-Depends},REMOVE_ME))dnl 4define(UTIL_LINUX_NG_DEFINES, 5ifdef(`UTIL_LINUX_NG', ``libblkid-dev (>= 2.16), uuid-dev (>= 2.16),''))dnl 6define(DIETLIBC_DEFINES, 7ifdef(`DIETLIBC', ``dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc],''))dnl 8Source: e2fsprogs 9Section: admin 10Priority: required 11Maintainer: Theodore Y. Ts'o <tytso@mit.edu> 12Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, DIETLIBC_DEFINES gcc-multilib [mips mipsel], debhelper (>= 7.0), UTIL_LINUX_NG_DEFINES m4 13Standards-Version: 3.9.3 14Homepage: http://e2fsprogs.sourceforge.net 15 16Package: e2fsck-static 17Priority: optional 18Depends: ${shlibs:Depends}, ${misc:Depends} 19Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static 20Architecture: any 21Description: statically-linked version of the ext2/ext3/ext4 filesystem checker 22 This may be of some help to you if your filesystem gets corrupted enough 23 to break the shared libraries used by the dynamically linked checker. 24 . 25 This binary takes much more space than its dynamic counterpart located 26 in e2fsprogs, though. 27 . 28 You may want to install a statically-linked shell as well, to be able 29 to run this program if something like your C library gets corrupted. 30 31Package: libcomerr2 32Section: libs 33Provides: libcomerr-kth-compat 34Depends: ${shlibs:Depends}, ${misc:Depends} 35Replaces: e2fsprogs (<< 1.34-1) 36Architecture: any 37MULTIARCH_HEADERS 38Description: common error description library 39 libcomerr is an attempt to present a common error-handling mechanism to 40 manipulate the most common form of error code in a fashion that does not 41 have the problems identified with mechanisms commonly in use. 42 43Package: comerr-dev 44Section: libdevel 45Priority: extra 46Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends} 47Suggests: doc-base 48Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) 49Architecture: any 50Description: common error description library - headers and static libraries 51 libcom_err is an attempt to present a common error-handling mechanism to 52 manipulate the most common form of error code in a fashion that does not 53 have the problems identified with mechanisms commonly in use. 54 . 55 This package contains the development environment for the com_err library. 56 57Package: libss2 58Section: libs 59Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends} 60Replaces: e2fsprogs (<< 1.34-1) 61Architecture: any 62MULTIARCH_HEADERS 63Description: command-line interface parsing library 64 libss provides a simple command-line interface parser which will 65 accept input from the user, parse the command into an argv argument 66 vector, and then dispatch it to a handler function. 67 . 68 It was originally inspired by the Multics SubSystem library. 69 70Package: ss-dev 71Section: libdevel 72Priority: extra 73Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends} 74Architecture: any 75Description: command-line interface parsing library - headers and static libraries 76 This package includes a tool that parses a command table to generate 77 a simple command-line interface parser, the include files needed to 78 compile and use it, and the static libs. 79 . 80 It was originally inspired by the Multics SubSystem library. 81 . 82 This package contains the development environment for the ss library. 83ifdef(`UTIL_LINUX_NG',,`` 84Package: libuuid1 85Section: libs 86Depends: passwd, ${shlibs:Depends}, ${misc:Depends} 87Recommends: uuid-runtime 88Replaces: e2fsprogs (<< 1.34-1) 89Architecture: any 90MULTIARCH_HEADERS 91Description: Universally Unique ID library 92 The libuuid library generates and parses 128-bit universally unique 93 ids (UUIDs). A UUID is an identifier that is unique across both 94 space and time, with respect to the space of all UUIDs. A UUID can 95 be used for multiple purposes, from tagging objects with an extremely 96 short lifetime, to reliably identifying very persistent objects 97 across a network. 98 . 99 See RFC 4122 for more information. 100 101Package: uuid-runtime 102Section: libs 103Priority: optional 104Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends} 105Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) 106Architecture: any 107Description: runtime components for the Universally Unique ID library 108 The libuuid library generates and parses 128-bit universally unique 109 ids (UUIDs). A UUID is an identifier that is unique across both 110 space and time, with respect to the space of all UUIDs. A UUID can 111 be used for multiple purposes, from tagging objects with an extremely 112 short lifetime, to reliably identifying very persistent objects 113 across a network. 114 . 115 See RFC 4122 for more information. 116 . 117 This package contains the uuidgen program and the uuidd daemon. 118 . 119 The uuidd daemon is used to generate UUIDs, especially time-based 120 UUID’s, in a secure and guaranteed-unique fashion, even in the face 121 of large numbers of threads trying to grab UUID’s running on 122 different CPU’s. It is used by libuuid as well as the uuidgen 123 program. 124 125Package: libuuid1-udeb 126XC-Package-Type: udeb 127Section: debian-installer 128Priority: optional 129Depends: ${shlibs:Depends} 130Architecture: any 131Description: stripped down universally unique id library, for debian-installer 132 libuuid generates and parses 128-bit universally unique ids (UUIDs). 133 See RFC 4122 for more information. 134 . 135 This is a minimal package for debian-installer. 136 137Package: uuid-dev 138Section: libdevel 139Priority: extra 140Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends} 141Replaces: e2fslibs-dev (<< 1.15) 142Architecture: any 143Description: universally unique id library - headers and static libraries 144 libuuid generates and parses 128-bit universally unique ids (UUIDs). 145 See RFC 4122 for more information. 146 . 147 This package contains the development environment for the uuid library. 148 149Package: libblkid1 150Section: libs 151Depends: ${shlibs:Depends}, ${misc:Depends} 152Architecture: any 153Description: block device id library 154 The blkid library which allows system programs like fsck and 155 mount to quickly and easily find block devices by filesystem UUID and 156 LABEL. This allows system administrators to avoid specifying 157 filesystems by hard-coded device names, but via a logical naming 158 system instead. 159 160Package: libblkid1-udeb 161XC-Package-Type: udeb 162Section: debian-installer 163Priority: optional 164Depends: ${shlibs:Depends}, ${misc:Depends} 165Architecture: any 166Description: stripped down block device id library, for debian-installer 167 The blkid library which allows system programs like fsck and 168 mount to quickly and easily find block devices by filesystem UUID and 169 LABEL. This allows system administrators to avoid specifiying 170 filesystems by hard-coded device names, but via a logical naming 171 system instead. 172 . 173 This is a minimal package for debian-installer. 174 175Package: libblkid-dev 176Section: libdevel 177Priority: extra 178Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends} 179Architecture: any 180Description: block device id library - headers and static libraries 181 The blkid library which allows system programs like fsck and 182 mount to quickly and easily find block devices by filesystem UUID and 183 LABEL. This allows system administrators to avoid specifiying 184 filesystems by hard-coded device names, but via a logical naming 185 system instead. 186 . 187 This package contains the development environment for the blkid library. 188'')dnl 189 190Package: e2fsprogs-udeb 191XC-Package-Type: udeb 192Section: debian-installer 193Priority: optional 194Depends: ${shlibs:Depends}, ${misc:Depends} 195Architecture: any 196Description: stripped-down versions of e2fsprogs, for debian-installer 197 This package is an e2fsprogs package built for a reduced size, so that 198 it can help to save space in debian-installer. 199 . 200 Don't attempt to install this package, it has no support for a couple of 201 features you surely want. Anyway it should refuse to install. 202 203Package: e2fslibs 204Section: libs 205Depends: ${shlibs:Depends}, ${misc:Depends} 206Replaces: e2fsprogs (<< 1.34-1) 207Provides: libext2fs2, libe2p2 208Architecture: any 209MULTIARCH_HEADERS 210Description: ext2/ext3/ext4 file system libraries 211 The ext2, ext3 and ext4 file systems are successors of the original ext 212 ("extended") file system. They are the main file system types used for 213 hard disks on Debian and other Linux systems. 214 . 215 This package provides the ext2fs and e2p libraries, for userspace software 216 that directly accesses extended file systems. Programs that use libext2fs 217 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include 218 dumpe2fs, chattr, and lsattr. 219 220Package: e2fslibs-dev 221Section: libdevel 222Priority: extra 223Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends} 224Suggests: doc-base 225Provides: ext2fs-dev, e2p-dev 226Replaces: libkrb5-dev (<< 1.3) 227Architecture: any 228Description: ext2/ext3/ext4 file system libraries - headers and static libraries 229 The ext2, ext3 and ext4 file systems are successors of the original ext 230 ("extended") file system. They are the main file system types used for 231 hard disks on Debian and other Linux systems. 232 . 233 This package contains the development environment for the ext2fs and e2p 234 libraries. 235 236Package: e2fsprogs 237Essential: yes 238ifdef(`UTIL_LINUX_NG', 239``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1) 240'', 241``Pre-Depends: ${shlibs:Depends}, ${misc:Depends} 242'')dnl 243Suggests: gpart, parted, e2fsck-static 244Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) 245Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) 246Architecture: any 247Description: ext2/ext3/ext4 file system utilities 248 The ext2, ext3 and ext4 file systems are successors of the original ext 249 ("extended") file system. They are the main file system types used for 250 hard disks on Debian and other Linux systems. 251 . 252 This package contains programs for creating, checking, and maintaining 253 ext2/3/4-based file systems. 254 255Package: e2fsprogs-dbg 256Section: debug 257Priority: extra 258Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} 259Architecture: any 260Description: debugging information for e2fsprogs 261 This package includes the debug information useful for debugging e2fsprogs 262 and its libraries, contained in the e2fsprogs and e2fsck-static packages. 263 The debug information is used for execution tracing and core 264 dump analysis. 265ifdef(`UTIL_LINUX_NG',,`` 266Package: uuid-runtime-dbg 267Section: debug 268Priority: extra 269Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends} 270Architecture: any 271Description: debugging information for uuid-runtime 272 This package includes the debug information useful for debugging the 273 uuid runtime programs, contained in the uuid-runtime package. 274 The debugging information is used for execution tracing and core 275 dump analysis. 276'')dnl 277 278Package: e2fslibs-dbg 279Section: debug 280Priority: extra 281Depends: e2fslibs (= ${binary:Version}), ${misc:Depends} 282Architecture: any 283Description: debugging information for e2fslibs 284 This package includes the debug information useful for debugging the 285 ext2fs and e2p libraries, contained in the e2fslibs package. The debug 286 information is used for execution tracing and core dump analysis. 287 288Package: libcomerr2-dbg 289Section: debug 290Priority: extra 291Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends} 292Architecture: any 293Description: debugging information for libcomerr2 294 This package includes the debug information useful for debugging the 295 com_err library, contained in the libcomerr2 package. The debugging 296 information is used for execution tracing and core dump analysis. 297 298Package: libss2-dbg 299Section: debug 300Priority: extra 301Depends: libss2 (= ${binary:Version}), ${misc:Depends} 302Architecture: any 303Description: debugging information for libss2 304 This package includes the debug information useful for debugging the 305 ss library, contained in the libss2 package. The debug information 306 is used for execution tracing and core dump analysis. 307ifdef(`UTIL_LINUX_NG',,`` 308Package: libblkid1-dbg 309Section: debug 310Priority: extra 311Depends: libblkid1 (= ${binary:Version}), ${misc:Depends} 312Architecture: any 313Description: debugging information for libblkid1 314 This package includes the debug information useful for debugging the 315 blkid library, contained in the libblkid1 package. The debug 316 information is used for execution tracing and core dump analysis. 317 318Package: libuuid1-dbg 319Section: debug 320Priority: extra 321Depends: libuuid1 (= ${binary:Version}), ${misc:Depends} 322Architecture: any 323Description: debugging information for libuuid1 324 This package includes the debug information useful for debugging the 325 UUID library, contained in the libuuid1 package. The debug 326 information is used for execution tracing and core dump analysis. 327'')dnl 328