problem.h revision 789bd401c3bce85d3c2ae4504ca62509aa0a8b88
1/*
2 * problem.h --- e2fsck problem error codes
3 *
4 * Copyright 1996 by Theodore Ts'o
5 *
6 * %Begin-Header%
7 * This file may be redistributed under the terms of the GNU Public
8 * License.
9 * %End-Header%
10 */
11
12typedef __u32 problem_t;
13
14struct problem_context {
15	errcode_t	errcode;
16	ext2_ino_t ino, ino2, dir;
17	struct ext2_inode *inode;
18	struct ext2_dir_entry *dirent;
19	blk64_t	blk, blk2;
20	e2_blkcnt_t	blkcount;
21	int		group;
22	__u32		csum1, csum2;
23	__u64	num;
24	const char *str;
25};
26
27/*
28 * We define a set of "latch groups"; these are problems which are
29 * handled as a set.  The user answers once for a particular latch
30 * group.
31 */
32#define PR_LATCH_MASK	0x0ff0  /* Latch mask */
33#define PR_LATCH_BLOCK	0x0010	/* Latch for illegal blocks (pass 1) */
34#define PR_LATCH_BBLOCK	0x0020	/* Latch for bad block inode blocks (pass 1) */
35#define PR_LATCH_IBITMAP 0x0030 /* Latch for pass 5 inode bitmap proc. */
36#define PR_LATCH_BBITMAP 0x0040 /* Latch for pass 5 inode bitmap proc. */
37#define PR_LATCH_RELOC	0x0050  /* Latch for superblock relocate hint */
38#define PR_LATCH_DBLOCK	0x0060	/* Latch for pass 1b dup block headers */
39#define PR_LATCH_LOW_DTIME 0x0070 /* Latch for pass1 orphaned list refugees */
40#define PR_LATCH_TOOBIG	0x0080	/* Latch for file to big errors */
41#define PR_LATCH_OPTIMIZE_DIR 0x0090 /* Latch for optimize directories */
42#define PR_LATCH_BG_CHECKSUM 0x00A0  /* Latch for block group checksums */
43
44#define PR_LATCH(x)	((((x) & PR_LATCH_MASK) >> 4) - 1)
45
46/*
47 * Latch group descriptor flags
48 */
49#define PRL_YES		0x0001	/* Answer yes */
50#define PRL_NO		0x0002	/* Answer no */
51#define PRL_LATCHED	0x0004	/* The latch group is latched */
52#define PRL_SUPPRESS	0x0008	/* Suppress all latch group questions */
53
54#define PRL_VARIABLE	0x000f	/* All the flags that need to be reset */
55
56/*
57 * Pre-Pass 1 errors
58 */
59
60/* Block bitmap not in group */
61#define PR_0_BB_NOT_GROUP	0x000001
62
63/* Inode bitmap not in group */
64#define PR_0_IB_NOT_GROUP	0x000002
65
66/* Inode table not in group */
67#define PR_0_ITABLE_NOT_GROUP	0x000003
68
69/* Superblock corrupt */
70#define PR_0_SB_CORRUPT		0x000004
71
72/* Filesystem size is wrong */
73#define PR_0_FS_SIZE_WRONG	0x000005
74
75/* Fragments not supported */
76#define PR_0_NO_FRAGMENTS	0x000006
77
78/* Bad blocks_per_group */
79#define PR_0_BLOCKS_PER_GROUP	0x000007
80
81/* Bad first_data_block */
82#define PR_0_FIRST_DATA_BLOCK	0x000008
83
84/* Adding UUID to filesystem */
85#define PR_0_ADD_UUID		0x000009
86
87/* Relocate hint */
88#define PR_0_RELOCATE_HINT	0x00000A
89
90/* Miscellaneous superblock corruption */
91#define PR_0_MISC_CORRUPT_SUPER	0x00000B
92
93/* Error determing physical device size of filesystem */
94#define PR_0_GETSIZE_ERROR	0x00000C
95
96/* Inode count in the superblock incorrect */
97#define PR_0_INODE_COUNT_WRONG	0x00000D
98
99/* The Hurd does not support the filetype feature */
100#define PR_0_HURD_CLEAR_FILETYPE 0x00000E
101
102/* Journal inode is invalid */
103#define PR_0_JOURNAL_BAD_INODE	0x00000F
104
105/* The external journal has multiple filesystems (which we can't handle yet) */
106#define PR_0_JOURNAL_UNSUPP_MULTIFS 0x000010
107
108/* Can't find external journal */
109#define PR_0_CANT_FIND_JOURNAL	0x000011
110
111/* External journal has bad superblock */
112#define PR_0_EXT_JOURNAL_BAD_SUPER 0x000012
113
114/* Superblock has a bad journal UUID */
115#define PR_0_JOURNAL_BAD_UUID	0x000013
116
117/* Journal has an unknown superblock type */
118#define PR_0_JOURNAL_UNSUPP_SUPER 0x000014
119
120/* Journal superblock is corrupt */
121#define PR_0_JOURNAL_BAD_SUPER	0x000015
122
123/* Journal superblock is corrupt */
124#define PR_0_JOURNAL_HAS_JOURNAL 0x000016
125
126/* Superblock has recovery flag set but no journal */
127#define PR_0_JOURNAL_RECOVER_SET 0x000017
128
129/* Journal has data, but recovery flag is clear */
130#define PR_0_JOURNAL_RECOVERY_CLEAR 0x000018
131
132/* Ask if we should clear the journal */
133#define PR_0_JOURNAL_RESET_JOURNAL 0x000019
134
135/* Filesystem revision is 0, but feature flags are set */
136#define PR_0_FS_REV_LEVEL	0x00001A
137
138/* Clearing orphan inode */
139#define PR_0_ORPHAN_CLEAR_INODE			0x000020
140
141/* Illegal block found in orphaned inode */
142#define PR_0_ORPHAN_ILLEGAL_BLOCK_NUM		0x000021
143
144/* Already cleared block found in orphaned inode */
145#define PR_0_ORPHAN_ALREADY_CLEARED_BLOCK	0x000022
146
147/* Illegal orphan inode in superblock */
148#define PR_0_ORPHAN_ILLEGAL_HEAD_INODE		0x000023
149
150/* Illegal inode in orphaned inode list */
151#define PR_0_ORPHAN_ILLEGAL_INODE		0x000024
152
153/* Journal has unsupported read-only feature - abort */
154#define PR_0_JOURNAL_UNSUPP_ROCOMPAT		0x000025
155
156/* Journal has unsupported incompatible feature - abort */
157#define PR_0_JOURNAL_UNSUPP_INCOMPAT		0x000026
158
159/* Journal has unsupported version number */
160#define PR_0_JOURNAL_UNSUPP_VERSION		0x000027
161
162/* Moving journal to hidden file */
163#define	PR_0_MOVE_JOURNAL			0x000028
164
165/* Error moving journal */
166#define	PR_0_ERR_MOVE_JOURNAL			0x000029
167
168/* Clearing V2 journal superblock */
169#define PR_0_CLEAR_V2_JOURNAL			0x00002A
170
171/* Run journal anyway */
172#define PR_0_JOURNAL_RUN			0x00002B
173
174/* Run journal anyway by default */
175#define PR_0_JOURNAL_RUN_DEFAULT		0x00002C
176
177/* Backup journal inode blocks */
178#define PR_0_BACKUP_JNL				0x00002D
179
180/* Reserved blocks w/o resize_inode */
181#define PR_0_NONZERO_RESERVED_GDT_BLOCKS	0x00002E
182
183/* Resize_inode not enabled, but resize inode is non-zero */
184#define PR_0_CLEAR_RESIZE_INODE			0x00002F
185
186/* Resize inode invalid */
187#define PR_0_RESIZE_INODE_INVALID		0x000030
188
189/* Last mount time is in the future */
190#define PR_0_FUTURE_SB_LAST_MOUNT		0x000031
191
192/* Last write time is in the future */
193#define PR_0_FUTURE_SB_LAST_WRITE		0x000032
194
195/* Superblock hint for external journal incorrect */
196#define PR_0_EXTERNAL_JOURNAL_HINT		0x000033
197
198/* Superblock hint for external journal incorrect */
199#define PR_0_DIRHASH_HINT			0x000034
200
201/* Group descriptor N checksum is invalid */
202#define PR_0_GDT_CSUM				0x000035
203
204/* Group descriptor N marked uninitialized without feature set. */
205#define PR_0_GDT_UNINIT				0x000036
206
207/* Block bitmap is not initialised and Inode bitmap is -- NO LONGER USED */
208/* #define PR_0_BB_UNINIT_IB_INIT			0x000037 */
209
210/* Group descriptor N has invalid unused inodes count. */
211#define PR_0_GDT_ITABLE_UNUSED			0x000038
212
213/* Last group block bitmap is uninitialized. */
214#define PR_0_BB_UNINIT_LAST			0x000039
215
216/* Journal transaction found corrupt */
217#define PR_0_JNL_TXN_CORRUPT			0x00003A
218
219/* The test_fs filesystem flag is set and ext4 is available */
220#define PR_0_CLEAR_TESTFS_FLAG			0x00003B
221
222/* Last mount time is in the future (fudged) */
223#define PR_0_FUTURE_SB_LAST_MOUNT_FUDGED	0x00003C
224
225/* Last write time is in the future (fudged) */
226#define PR_0_FUTURE_SB_LAST_WRITE_FUDGED	0x00003D
227
228/* Block group checksum (latch question) */
229#define PR_0_GDT_CSUM_LATCH			0x00003E
230
231/* Free inodes count wrong */
232#define PR_0_FREE_INODE_COUNT			0x00003F
233
234/* Free blocks count wrong */
235#define PR_0_FREE_BLOCK_COUNT			0x000040
236
237/* Make quota file hidden */
238#define	PR_0_HIDE_QUOTA				0x000041
239
240/* Superblock has invalid MMP block. */
241#define PR_0_MMP_INVALID_BLK			0x000042
242
243/* Superblock has invalid MMP magic. */
244#define PR_0_MMP_INVALID_MAGIC			0x000043
245
246/* Opening file system failed */
247#define PR_0_OPEN_FAILED			0x000044
248
249/* Checking group descriptor failed */
250#define PR_0_CHECK_DESC_FAILED			0x000045
251
252/*
253 * Pass 1 errors
254 */
255
256/* Pass 1: Checking inodes, blocks, and sizes */
257#define PR_1_PASS_HEADER		0x010000
258
259/* Root directory is not an inode */
260#define PR_1_ROOT_NO_DIR		0x010001
261
262/* Root directory has dtime set */
263#define PR_1_ROOT_DTIME			0x010002
264
265/* Reserved inode has bad mode */
266#define PR_1_RESERVED_BAD_MODE		0x010003
267
268/* Deleted inode has zero dtime */
269#define PR_1_ZERO_DTIME			0x010004
270
271/* Inode in use, but dtime set */
272#define PR_1_SET_DTIME			0x010005
273
274/* Zero-length directory */
275#define PR_1_ZERO_LENGTH_DIR		0x010006
276
277/* Block bitmap conflicts with some other fs block */
278#define PR_1_BB_CONFLICT		0x010007
279
280/* Inode bitmap conflicts with some other fs block */
281#define PR_1_IB_CONFLICT		0x010008
282
283/* Inode table conflicts with some other fs block */
284#define PR_1_ITABLE_CONFLICT		0x010009
285
286/* Block bitmap is on a bad block */
287#define PR_1_BB_BAD_BLOCK		0x01000A
288
289/* Inode bitmap is on a bad block */
290#define PR_1_IB_BAD_BLOCK		0x01000B
291
292/* Inode has incorrect i_size */
293#define PR_1_BAD_I_SIZE			0x01000C
294
295/* Inode has incorrect i_blocks */
296#define PR_1_BAD_I_BLOCKS		0x01000D
297
298/* Illegal block number in inode */
299#define PR_1_ILLEGAL_BLOCK_NUM		0x01000E
300
301/* Block number overlaps fs metadata */
302#define PR_1_BLOCK_OVERLAPS_METADATA	0x01000F
303
304/* Inode has illegal blocks (latch question) */
305#define PR_1_INODE_BLOCK_LATCH		0x010010
306
307/* Too many bad blocks in inode */
308#define	PR_1_TOO_MANY_BAD_BLOCKS	0x010011
309
310/* Illegal block number in bad block inode */
311#define PR_1_BB_ILLEGAL_BLOCK_NUM	0x010012
312
313/* Bad block inode has illegal blocks (latch question) */
314#define PR_1_INODE_BBLOCK_LATCH		0x010013
315
316/* Duplicate or bad blocks in use! */
317#define PR_1_DUP_BLOCKS_PREENSTOP	0x010014
318
319/* Bad block used as bad block indirect block */
320#define PR_1_BBINODE_BAD_METABLOCK	0x010015
321
322/* Inconsistency can't be fixed prompt */
323#define PR_1_BBINODE_BAD_METABLOCK_PROMPT 0x010016
324
325/* Bad primary block */
326#define PR_1_BAD_PRIMARY_BLOCK		0x010017
327
328/* Bad primary block prompt */
329#define PR_1_BAD_PRIMARY_BLOCK_PROMPT	0x010018
330
331/* Bad primary superblock */
332#define PR_1_BAD_PRIMARY_SUPERBLOCK	0x010019
333
334/* Bad primary block group descriptors */
335#define PR_1_BAD_PRIMARY_GROUP_DESCRIPTOR 0x01001A
336
337/* Bad superblock in group */
338#define PR_1_BAD_SUPERBLOCK		0x01001B
339
340/* Bad block group descriptors in group */
341#define PR_1_BAD_GROUP_DESCRIPTORS	0x01001C
342
343/* Block claimed for no reason */
344#define PR_1_PROGERR_CLAIMED_BLOCK	0x01001D
345
346/* Error allocating blocks for relocating metadata */
347#define PR_1_RELOC_BLOCK_ALLOCATE	0x01001E
348
349/* Error allocating block buffer during relocation process */
350#define PR_1_RELOC_MEMORY_ALLOCATE	0x01001F
351
352/* Relocating metadata group information from X to Y */
353#define PR_1_RELOC_FROM_TO		0x010020
354
355/* Relocating metatdata group information to X */
356#define PR_1_RELOC_TO			0x010021
357
358/* Block read error during relocation process */
359#define PR_1_RELOC_READ_ERR		0x010022
360
361/* Block write error during relocation process */
362#define PR_1_RELOC_WRITE_ERR		0x010023
363
364/* Error allocating inode bitmap */
365#define PR_1_ALLOCATE_IBITMAP_ERROR	0x010024
366
367/* Error allocating block bitmap */
368#define PR_1_ALLOCATE_BBITMAP_ERROR	0x010025
369
370/* Error allocating icount structure */
371#define PR_1_ALLOCATE_ICOUNT		0x010026
372
373/* Error allocating dbcount */
374#define PR_1_ALLOCATE_DBCOUNT		0x010027
375
376/* Error while scanning inodes */
377#define PR_1_ISCAN_ERROR		0x010028
378
379/* Error while iterating over blocks */
380#define PR_1_BLOCK_ITERATE		0x010029
381
382/* Error while storing inode count information */
383#define PR_1_ICOUNT_STORE		0x01002A
384
385/* Error while storing directory block information */
386#define PR_1_ADD_DBLOCK			0x01002B
387
388/* Error while reading inode (for clearing) */
389#define PR_1_READ_INODE			0x01002C
390
391/* Suppress messages prompt */
392#define PR_1_SUPPRESS_MESSAGES		0x01002D
393
394/* Imagic flag set on an inode when filesystem doesn't support it */
395#define PR_1_SET_IMAGIC			0x01002F
396
397/* Immutable flag set on a device or socket inode */
398#define PR_1_SET_IMMUTABLE		0x010030
399
400/* Compression flag set on a non-compressed filesystem */
401#define PR_1_COMPR_SET			0x010031
402
403/* Non-zero size on on device, fifo or socket inode */
404#define PR_1_SET_NONZSIZE		0x010032
405
406/* Filesystem revision is 0, but feature flags are set */
407#define PR_1_FS_REV_LEVEL		0x010033
408
409/* Journal inode not in use, needs clearing */
410#define PR_1_JOURNAL_INODE_NOT_CLEAR	0x010034
411
412/* Journal inode has wrong mode */
413#define PR_1_JOURNAL_BAD_MODE		0x010035
414
415/* Inode that was part of orphan linked list */
416#define PR_1_LOW_DTIME			0x010036
417
418/* Latch question which asks how to deal with low dtime inodes */
419#define PR_1_ORPHAN_LIST_REFUGEES	0x010037
420
421/* Error allocating refcount structure */
422#define PR_1_ALLOCATE_REFCOUNT		0x010038
423
424/* Error reading Extended Attribute block */
425#define PR_1_READ_EA_BLOCK		0x010039
426
427/* Invalid Extended Attribute block */
428#define PR_1_BAD_EA_BLOCK		0x01003A
429
430/* Error reading Extended Attribute block while fixing refcount -- abort */
431#define PR_1_EXTATTR_READ_ABORT		0x01003B
432
433/* Extended attribute reference count incorrect */
434#define PR_1_EXTATTR_REFCOUNT		0x01003C
435
436/* Error writing Extended Attribute block while fixing refcount */
437#define PR_1_EXTATTR_WRITE_ABORT	0x01003D
438
439/* Multiple EA blocks not supported */
440#define PR_1_EA_MULTI_BLOCK		0x01003E
441
442/* Error allocating EA region allocation structure */
443#define PR_1_EA_ALLOC_REGION_ABORT	0x01003F
444
445/* Error EA allocation collision */
446#define PR_1_EA_ALLOC_COLLISION		0x010040
447
448/* Bad extended attribute name */
449#define PR_1_EA_BAD_NAME		0x010041
450
451/* Bad extended attribute value */
452#define PR_1_EA_BAD_VALUE		0x010042
453
454/* Inode too big (latch question) */
455#define PR_1_INODE_TOOBIG		0x010043
456
457/* Directory too big */
458#define PR_1_TOOBIG_DIR			0x010044
459
460/* Regular file too big */
461#define PR_1_TOOBIG_REG			0x010045
462
463/* Symlink too big */
464#define PR_1_TOOBIG_SYMLINK		0x010046
465
466/* INDEX_FL flag set on a non-HTREE filesystem */
467#define PR_1_HTREE_SET			0x010047
468
469/* INDEX_FL flag set on a non-directory */
470#define PR_1_HTREE_NODIR		0x010048
471
472/* Invalid root node in HTREE directory */
473#define PR_1_HTREE_BADROOT		0x010049
474
475/* Unsupported hash version in HTREE directory */
476#define PR_1_HTREE_HASHV		0x01004A
477
478/* Incompatible flag in HTREE root node */
479#define PR_1_HTREE_INCOMPAT		0x01004B
480
481/* HTREE too deep */
482#define PR_1_HTREE_DEPTH		0x01004C
483
484/* Bad block has indirect block that conflicts with filesystem block */
485#define PR_1_BB_FS_BLOCK		0x01004D
486
487/* Resize inode failed */
488#define PR_1_RESIZE_INODE_CREATE	0x01004E
489
490/* inode->i_size is too long */
491#define PR_1_EXTRA_ISIZE		0x01004F
492
493/* attribute name is too long */
494#define PR_1_ATTR_NAME_LEN		0x010050
495
496/* wrong EA value offset */
497#define PR_1_ATTR_VALUE_OFFSET		0x010051
498
499/* wrong EA blocknumber */
500#define PR_1_ATTR_VALUE_BLOCK		0x010052
501
502/* wrong EA value size */
503#define PR_1_ATTR_VALUE_SIZE		0x010053
504
505/* wrong EA hash value */
506#define PR_1_ATTR_HASH			0x010054
507
508/* inode appears to be a directory */
509#define PR_1_TREAT_AS_DIRECTORY		0x010055
510
511/* Error while reading extent tree */
512#define PR_1_READ_EXTENT		0x010056
513
514/* Failure to iterate extents */
515#define PR_1_EXTENT_ITERATE_FAILURE	0x010057
516
517/* Bad starting block in extent */
518#define PR_1_EXTENT_BAD_START_BLK	0x010058
519
520/* Extent ends beyond filesystem */
521#define PR_1_EXTENT_ENDS_BEYOND		0x010059
522
523/* EXTENTS_FL flag set on a non-extents capable filesystem */
524#define PR_1_EXTENTS_SET		0x01005A
525
526/* inode has extents, superblock missing INCOMPAT_EXTENTS feature */
527#define PR_1_EXTENT_FEATURE		0x01005B
528
529/* inode missing EXTENTS_FL, but is an extent inode */
530#define PR_1_UNSET_EXTENT_FL		0x01005C
531
532/* Fast symlink has EXTENTS_FL set */
533#define PR_1_FAST_SYMLINK_EXTENT_FL	0x01005D
534
535/* Extents are out of order */
536#define PR_1_OUT_OF_ORDER_EXTENTS	0x01005E
537
538/* Extent node header invalid */
539#define PR_1_EXTENT_HEADER_INVALID	0x01005F
540
541/* PR_1_EOFBLOCKS_FL_SET 0x010060 was here */
542
543/* Failed to convert subcluster bitmap */
544#define PR_1_CONVERT_SUBCLUSTER		0x010061
545
546/* Quota inode has wrong mode */
547#define PR_1_QUOTA_BAD_MODE		0x010062
548
549/* Quota inode is not in use, but contains data */
550#define PR_1_QUOTA_INODE_NOT_CLEAR	0x010063
551
552/* Quota inode is user visible */
553#define PR_1_QUOTA_INODE_NOT_HIDDEN	0x010064
554
555/* Invalid bad inode */
556#define PR_1_INVALID_BAD_INODE		0x010065
557
558/* Extent has zero length */
559#define PR_1_EXTENT_LENGTH_ZERO		0x010066
560
561/* Index start doesn't match start of next extent down */
562#define PR_1_EXTENT_INDEX_START_INVALID	0x01006D
563
564/*
565 * Pass 1b errors
566 */
567
568/* Pass 1B: Rescan for duplicate/bad blocks */
569#define PR_1B_PASS_HEADER	0x011000
570
571/* Duplicate/bad block(s) header */
572#define PR_1B_DUP_BLOCK_HEADER	0x011001
573
574/* Duplicate/bad block(s) in inode */
575#define PR_1B_DUP_BLOCK		0x011002
576
577/* Duplicate/bad block(s) end */
578#define PR_1B_DUP_BLOCK_END	0x011003
579
580/* Error while scanning inodes */
581#define PR_1B_ISCAN_ERROR	0x011004
582
583/* Error allocating inode bitmap */
584#define PR_1B_ALLOCATE_IBITMAP_ERROR 0x011005
585
586/* Error while iterating over blocks */
587#define PR_1B_BLOCK_ITERATE	0x011006
588
589/* Error adjusting EA refcount */
590#define PR_1B_ADJ_EA_REFCOUNT	0x011007
591
592/* Pass 1C: Scan directories for inodes with dup blocks. */
593#define PR_1C_PASS_HEADER	0x012000
594
595
596/* Pass 1D: Reconciling duplicate blocks */
597#define PR_1D_PASS_HEADER	0x013000
598
599/* File has duplicate blocks */
600#define PR_1D_DUP_FILE		0x013001
601
602/* List of files sharing duplicate blocks */
603#define PR_1D_DUP_FILE_LIST	0x013002
604
605/* File sharing blocks with filesystem metadata  */
606#define PR_1D_SHARE_METADATA	0x013003
607
608/* Report of how many duplicate/bad inodes */
609#define PR_1D_NUM_DUP_INODES	0x013004
610
611/* Duplicated blocks already reassigned or cloned. */
612#define PR_1D_DUP_BLOCKS_DEALT	0x013005
613
614/* Clone duplicate/bad blocks? */
615#define PR_1D_CLONE_QUESTION	0x013006
616
617/* Delete file? */
618#define PR_1D_DELETE_QUESTION	0x013007
619
620/* Couldn't clone file (error) */
621#define PR_1D_CLONE_ERROR	0x013008
622
623/*
624 * Pass 2 errors
625 */
626
627/* Pass 2: Checking directory structure */
628#define PR_2_PASS_HEADER	0x020000
629
630/* Bad inode number for '.' */
631#define PR_2_BAD_INODE_DOT	0x020001
632
633/* Directory entry has bad inode number */
634#define PR_2_BAD_INO		0x020002
635
636/* Directory entry has deleted or unused inode */
637#define PR_2_UNUSED_INODE	0x020003
638
639/* Directry entry is link to '.' */
640#define PR_2_LINK_DOT		0x020004
641
642/* Directory entry points to inode now located in a bad block */
643#define PR_2_BB_INODE		0x020005
644
645/* Directory entry contains a link to a directory */
646#define PR_2_LINK_DIR		0x020006
647
648/* Directory entry contains a link to the root directry */
649#define PR_2_LINK_ROOT		0x020007
650
651/* Directory entry has illegal characters in its name */
652#define PR_2_BAD_NAME		0x020008
653
654/* Missing '.' in directory inode */
655#define PR_2_MISSING_DOT	0x020009
656
657/* Missing '..' in directory inode */
658#define PR_2_MISSING_DOT_DOT	0x02000A
659
660/* First entry in directory inode doesn't contain '.' */
661#define PR_2_1ST_NOT_DOT	0x02000B
662
663/* Second entry in directory inode doesn't contain '..' */
664#define PR_2_2ND_NOT_DOT_DOT	0x02000C
665
666/* i_faddr should be zero */
667#define PR_2_FADDR_ZERO		0x02000D
668
669/* i_file_acl should be zero */
670#define PR_2_FILE_ACL_ZERO	0x02000E
671
672/* i_dir_acl should be zero */
673#define PR_2_DIR_ACL_ZERO	0x02000F
674
675/* i_frag should be zero */
676#define PR_2_FRAG_ZERO		0x020010
677
678/* i_fsize should be zero */
679#define PR_2_FSIZE_ZERO		0x020011
680
681/* inode has bad mode */
682#define PR_2_BAD_MODE		0x020012
683
684/* directory corrupted */
685#define PR_2_DIR_CORRUPTED	0x020013
686
687/* filename too long */
688#define PR_2_FILENAME_LONG	0x020014
689
690/* Directory inode has a missing block (hole) */
691#define PR_2_DIRECTORY_HOLE	0x020015
692
693/* '.' is not NULL terminated */
694#define PR_2_DOT_NULL_TERM	0x020016
695
696/* '..' is not NULL terminated */
697#define PR_2_DOT_DOT_NULL_TERM	0x020017
698
699/* Illegal character device in inode */
700#define PR_2_BAD_CHAR_DEV	0x020018
701
702/* Illegal block device in inode */
703#define PR_2_BAD_BLOCK_DEV	0x020019
704
705/* Duplicate '.' entry */
706#define PR_2_DUP_DOT		0x02001A
707
708/* Duplicate '..' entry */
709#define PR_2_DUP_DOT_DOT	0x02001B
710
711/* Internal error: couldn't find dir_info */
712#define PR_2_NO_DIRINFO		0x02001C
713
714/* Final rec_len is wrong */
715#define PR_2_FINAL_RECLEN	0x02001D
716
717/* Error allocating icount structure */
718#define PR_2_ALLOCATE_ICOUNT	0x02001E
719
720/* Error iterating over directory blocks */
721#define PR_2_DBLIST_ITERATE	0x02001F
722
723/* Error reading directory block */
724#define PR_2_READ_DIRBLOCK	0x020020
725
726/* Error writing directory block */
727#define PR_2_WRITE_DIRBLOCK	0x020021
728
729/* Error allocating new directory block */
730#define PR_2_ALLOC_DIRBOCK	0x020022
731
732/* Error deallocating inode */
733#define PR_2_DEALLOC_INODE	0x020023
734
735/* Directory entry for '.' is big.  Split? */
736#define PR_2_SPLIT_DOT		0x020024
737
738/* Illegal FIFO */
739#define PR_2_BAD_FIFO		0x020025
740
741/* Illegal socket */
742#define PR_2_BAD_SOCKET		0x020026
743
744/* Directory filetype not set */
745#define PR_2_SET_FILETYPE	0x020027
746
747/* Directory filetype incorrect */
748#define PR_2_BAD_FILETYPE	0x020028
749
750/* Directory filetype set when it shouldn't be */
751#define PR_2_CLEAR_FILETYPE	0x020029
752
753/* Directory filename can't be zero-length  */
754#define PR_2_NULL_NAME		0x020030
755
756/* Invalid symlink */
757#define PR_2_INVALID_SYMLINK	0x020031
758
759/* i_file_acl (extended attribute) is bad */
760#define PR_2_FILE_ACL_BAD	0x020032
761
762/* Filesystem contains large files, but has no such flag in sb */
763#define PR_2_FEATURE_LARGE_FILES 0x020033
764
765/* Node in HTREE directory not referenced */
766#define PR_2_HTREE_NOTREF	0x020034
767
768/* Node in HTREE directory referenced twice */
769#define PR_2_HTREE_DUPREF	0x020035
770
771/* Node in HTREE directory has bad min hash */
772#define PR_2_HTREE_MIN_HASH	0x020036
773
774/* Node in HTREE directory has bad max hash */
775#define PR_2_HTREE_MAX_HASH	0x020037
776
777/* Clear invalid HTREE directory */
778#define PR_2_HTREE_CLEAR	0x020038
779
780/* Clear the htree flag forcibly */
781/* #define PR_2_HTREE_FCLR	0x020039 */
782
783/* Bad block in htree interior node */
784#define PR_2_HTREE_BADBLK	0x02003A
785
786/* Error adjusting EA refcount */
787#define PR_2_ADJ_EA_REFCOUNT	0x02003B
788
789/* Invalid HTREE root node */
790#define PR_2_HTREE_BAD_ROOT	0x02003C
791
792/* Invalid HTREE limit */
793#define PR_2_HTREE_BAD_LIMIT	0x02003D
794
795/* Invalid HTREE count */
796#define PR_2_HTREE_BAD_COUNT	0x02003E
797
798/* HTREE interior node has out-of-order hashes in table */
799#define PR_2_HTREE_HASH_ORDER	0x02003F
800
801/* Node in HTREE directory has bad depth */
802#define PR_2_HTREE_BAD_DEPTH	0x020040
803
804/* Duplicate directory entry found */
805#define PR_2_DUPLICATE_DIRENT	0x020041
806
807/* Non-unique filename found */
808#define PR_2_NON_UNIQUE_FILE	0x020042
809
810/* Duplicate directory entry found */
811#define PR_2_REPORT_DUP_DIRENT	0x020043
812
813/* i_blocks_hi should be zero */
814#define PR_2_BLOCKS_HI_ZERO	0x020044
815
816/* Unexpected HTREE block */
817#define PR_2_UNEXPECTED_HTREE_BLOCK	0x020045
818
819/* Inode found in group where _INODE_UNINIT is set */
820#define PR_2_INOREF_BG_INO_UNINIT	0x020046
821
822/* Inode found in group unused inodes area */
823#define PR_2_INOREF_IN_UNUSED		0x020047
824
825/* i_file_acl_hi should be zero */
826#define PR_2_I_FILE_ACL_HI_ZERO		0x020048
827
828/*
829 * Pass 3 errors
830 */
831
832/* Pass 3: Checking directory connectivity */
833#define PR_3_PASS_HEADER		0x030000
834
835/* Root inode not allocated */
836#define PR_3_NO_ROOT_INODE		0x030001
837
838/* No room in lost+found */
839#define PR_3_EXPAND_LF_DIR		0x030002
840
841/* Unconnected directory inode */
842#define PR_3_UNCONNECTED_DIR		0x030003
843
844/* /lost+found not found */
845#define PR_3_NO_LF_DIR			0x030004
846
847/* .. entry is incorrect */
848#define PR_3_BAD_DOT_DOT		0x030005
849
850/* Bad or non-existent /lost+found.  Cannot reconnect */
851#define PR_3_NO_LPF			0x030006
852
853/* Could not expand /lost+found */
854#define PR_3_CANT_EXPAND_LPF		0x030007
855
856/* Could not reconnect inode */
857#define PR_3_CANT_RECONNECT		0x030008
858
859/* Error while trying to find /lost+found */
860#define PR_3_ERR_FIND_LPF		0x030009
861
862/* Error in ext2fs_new_block while creating /lost+found */
863#define PR_3_ERR_LPF_NEW_BLOCK		0x03000A
864
865/* Error in ext2fs_new_inode while creating /lost+found */
866#define PR_3_ERR_LPF_NEW_INODE		0x03000B
867
868/* Error in ext2fs_new_dir_block while creating /lost+found */
869#define PR_3_ERR_LPF_NEW_DIR_BLOCK	0x03000C
870
871/* Error while writing directory block for /lost+found */
872#define PR_3_ERR_LPF_WRITE_BLOCK	0x03000D
873
874/* Error while adjusting inode count */
875#define PR_3_ADJUST_INODE		0x03000E
876
877/* Couldn't fix parent directory -- error */
878#define PR_3_FIX_PARENT_ERR		0x03000F
879
880/* Couldn't fix parent directory -- couldn't find it */
881#define PR_3_FIX_PARENT_NOFIND		0x030010
882
883/* Error allocating inode bitmap */
884#define PR_3_ALLOCATE_IBITMAP_ERROR	0x030011
885
886/* Error creating root directory */
887#define PR_3_CREATE_ROOT_ERROR		0x030012
888
889/* Error creating lost and found directory */
890#define PR_3_CREATE_LPF_ERROR		0x030013
891
892/* Root inode is not directory; aborting */
893#define PR_3_ROOT_NOT_DIR_ABORT		0x030014
894
895/* Cannot proceed without a root inode. */
896#define PR_3_NO_ROOT_INODE_ABORT	0x030015
897
898/* Internal error: couldn't find dir_info */
899#define PR_3_NO_DIRINFO			0x030016
900
901/* Lost+found is not a directory */
902#define PR_3_LPF_NOTDIR			0x030017
903
904/*
905 * Pass 3a --- rehashing diretories
906 */
907/* Pass 3a: Reindexing directories */
908#define PR_3A_PASS_HEADER		0x031000
909
910/* Error iterating over directories */
911#define PR_3A_OPTIMIZE_ITER		0x031001
912
913/* Error rehash directory */
914#define PR_3A_OPTIMIZE_DIR_ERR		0x031002
915
916/* Rehashing dir header */
917#define PR_3A_OPTIMIZE_DIR_HEADER	0x031003
918
919/* Rehashing directory %d */
920#define PR_3A_OPTIMIZE_DIR		0x031004
921
922/* Rehashing dir end */
923#define PR_3A_OPTIMIZE_DIR_END		0x031005
924
925/*
926 * Pass 4 errors
927 */
928
929/* Pass 4: Checking reference counts */
930#define PR_4_PASS_HEADER		0x040000
931
932/* Unattached zero-length inode */
933#define PR_4_ZERO_LEN_INODE		0x040001
934
935/* Unattached inode */
936#define PR_4_UNATTACHED_INODE		0x040002
937
938/* Inode ref count wrong */
939#define PR_4_BAD_REF_COUNT		0x040003
940
941/* Inconsistent inode count information cached */
942#define PR_4_INCONSISTENT_COUNT		0x040004
943
944/*
945 * Pass 5 errors
946 */
947
948/* Pass 5: Checking group summary information */
949#define PR_5_PASS_HEADER		0x050000
950
951/* Padding at end of inode bitmap is not set. */
952#define PR_5_INODE_BMAP_PADDING		0x050001
953
954/* Padding at end of block bitmap is not set. */
955#define PR_5_BLOCK_BMAP_PADDING		0x050002
956
957/* Block bitmap differences header */
958#define PR_5_BLOCK_BITMAP_HEADER	0x050003
959
960/* Block not used, but marked in bitmap */
961#define PR_5_BLOCK_UNUSED		0x050004
962
963/* Block used, but not marked used in bitmap */
964#define PR_5_BLOCK_USED			0x050005
965
966/* Block bitmap differences end */
967#define PR_5_BLOCK_BITMAP_END		0x050006
968
969/* Inode bitmap differences header */
970#define PR_5_INODE_BITMAP_HEADER	0x050007
971
972/* Inode not used, but marked in bitmap */
973#define PR_5_INODE_UNUSED		0x050008
974
975/* Inode used, but not marked used in bitmap */
976#define PR_5_INODE_USED			0x050009
977
978/* Inode bitmap differences end */
979#define PR_5_INODE_BITMAP_END		0x05000A
980
981/* Free inodes count for group wrong */
982#define PR_5_FREE_INODE_COUNT_GROUP	0x05000B
983
984/* Directories count for group wrong */
985#define PR_5_FREE_DIR_COUNT_GROUP	0x05000C
986
987/* Free inodes count wrong */
988#define PR_5_FREE_INODE_COUNT		0x05000D
989
990/* Free blocks count for group wrong */
991#define PR_5_FREE_BLOCK_COUNT_GROUP	0x05000E
992
993/* Free blocks count wrong */
994#define PR_5_FREE_BLOCK_COUNT		0x05000F
995
996/* Programming error: bitmap endpoints don't match */
997#define PR_5_BMAP_ENDPOINTS		0x050010
998
999/* Internal error: fudging end of bitmap */
1000#define PR_5_FUDGE_BITMAP_ERROR		0x050011
1001
1002/* Error copying in replacement inode bitmap */
1003#define PR_5_COPY_IBITMAP_ERROR		0x050012
1004
1005/* Error copying in replacement block bitmap */
1006#define PR_5_COPY_BBITMAP_ERROR		0x050013
1007
1008/* Block range not used, but marked in bitmap */
1009#define PR_5_BLOCK_RANGE_UNUSED		0x050014
1010
1011/* Block range used, but not marked used in bitmap */
1012#define PR_5_BLOCK_RANGE_USED		0x050015
1013
1014/* Inode range not used, but marked in bitmap */
1015#define PR_5_INODE_RANGE_UNUSED		0x050016
1016
1017/* Inode rangeused, but not marked used in bitmap */
1018#define PR_5_INODE_RANGE_USED		0x050017
1019
1020/* Block in use but group is marked BLOCK_UNINIT */
1021#define PR_5_BLOCK_UNINIT		0x050018
1022
1023/* Inode in use but group is marked INODE_UNINIT */
1024#define PR_5_INODE_UNINIT		0x050019
1025
1026/*
1027 * Post-Pass 5 errors
1028 */
1029
1030/* Recreate the journal if E2F_FLAG_JOURNAL_INODE flag is set */
1031#define PR_6_RECREATE_JOURNAL		0x060001
1032
1033/* Update quota information if it is inconsistent */
1034#define PR_6_UPDATE_QUOTAS		0x060002
1035
1036/*
1037 * Function declarations
1038 */
1039int fix_problem(e2fsck_t ctx, problem_t code, struct problem_context *pctx);
1040int end_problem_latch(e2fsck_t ctx, int mask);
1041int set_latch_flags(int mask, int setflags, int clearflags);
1042int get_latch_flags(int mask, int *value);
1043void clear_problem_context(struct problem_context *pctx);
1044
1045/* message.c */
1046void print_e2fsck_message(FILE *f, e2fsck_t ctx, const char *msg,
1047			  struct problem_context *pctx, int first,
1048			  int recurse);
1049
1050