Makefile.in revision 12e21689bc88a77c7b5b9b220fec31e049e5ec0f 
1# Makefile.in generated by automake 1.14 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19am__make_running_with_option = \
20  case $${target_option-} in \
21      ?) ;; \
22      *) echo "am__make_running_with_option: internal error: invalid" \
23              "target option '$${target_option-}' specified" >&2; \
24         exit 1;; \
25  esac; \
26  has_opt=no; \
27  sane_makeflags=$$MAKEFLAGS; \
28  if $(am__is_gnu_make); then \
29    sane_makeflags=$$MFLAGS; \
30  else \
31    case $$MAKEFLAGS in \
32      *\\[\ \	]*) \
33        bs=\\; \
34        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
36    esac; \
37  fi; \
38  skip_next=no; \
39  strip_trailopt () \
40  { \
41    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
42  }; \
43  for flg in $$sane_makeflags; do \
44    test $$skip_next = yes && { skip_next=no; continue; }; \
45    case $$flg in \
46      *=*|--*) continue;; \
47        -*I) strip_trailopt 'I'; skip_next=yes;; \
48      -*I?*) strip_trailopt 'I';; \
49        -*O) strip_trailopt 'O'; skip_next=yes;; \
50      -*O?*) strip_trailopt 'O';; \
51        -*l) strip_trailopt 'l'; skip_next=yes;; \
52      -*l?*) strip_trailopt 'l';; \
53      -[dEDm]) skip_next=yes;; \
54      -[JT]) skip_next=yes;; \
55    esac; \
56    case $$flg in \
57      *$$target_option*) has_opt=yes; break;; \
58    esac; \
59  done; \
60  test $$has_opt = yes
61am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63pkgdatadir = $(datadir)/@PACKAGE@
64pkgincludedir = $(includedir)/@PACKAGE@
65pkglibdir = $(libdir)/@PACKAGE@
66pkglibexecdir = $(libexecdir)/@PACKAGE@
67am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68install_sh_DATA = $(install_sh) -c -m 644
69install_sh_PROGRAM = $(install_sh) -c
70install_sh_SCRIPT = $(install_sh) -c
71INSTALL_HEADER = $(INSTALL_DATA)
72transform = $(program_transform_name)
73NORMAL_INSTALL = :
74PRE_INSTALL = :
75POST_INSTALL = :
76NORMAL_UNINSTALL = :
77PRE_UNINSTALL = :
78POST_UNINSTALL = :
79build_triplet = @build@
80host_triplet = @host@
81subdir = .
82DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
83	$(top_srcdir)/configure $(am__configure_deps) \
84	$(srcdir)/config.h.in $(srcdir)/libedit.pc.in COPYING \
85	ChangeLog INSTALL THANKS compile config.guess config.sub \
86	depcomp install-sh missing ltmain.sh
87ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
88am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
89	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
90	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
91	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
92am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
93	$(ACLOCAL_M4)
94am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
95 configure.lineno config.status.lineno
96mkinstalldirs = $(install_sh) -d
97CONFIG_HEADER = config.h
98CONFIG_CLEAN_FILES = libedit.pc
99CONFIG_CLEAN_VPATH_FILES =
100AM_V_P = $(am__v_P_@AM_V@)
101am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
102am__v_P_0 = false
103am__v_P_1 = :
104AM_V_GEN = $(am__v_GEN_@AM_V@)
105am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
106am__v_GEN_0 = @echo "  GEN     " $@;
107am__v_GEN_1 = 
108AM_V_at = $(am__v_at_@AM_V@)
109am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
110am__v_at_0 = @
111am__v_at_1 = 
112SOURCES =
113DIST_SOURCES =
114RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
115	ctags-recursive dvi-recursive html-recursive info-recursive \
116	install-data-recursive install-dvi-recursive \
117	install-exec-recursive install-html-recursive \
118	install-info-recursive install-pdf-recursive \
119	install-ps-recursive install-recursive installcheck-recursive \
120	installdirs-recursive pdf-recursive ps-recursive \
121	tags-recursive uninstall-recursive
122am__can_run_installinfo = \
123  case $$AM_UPDATE_INFO_DIR in \
124    n|no|NO) false;; \
125    *) (install-info --version) >/dev/null 2>&1;; \
126  esac
127am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
128am__vpath_adj = case $$p in \
129    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
130    *) f=$$p;; \
131  esac;
132am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
133am__install_max = 40
134am__nobase_strip_setup = \
135  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
136am__nobase_strip = \
137  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
138am__nobase_list = $(am__nobase_strip_setup); \
139  for p in $$list; do echo "$$p $$p"; done | \
140  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
141  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
142    if (++n[$$2] == $(am__install_max)) \
143      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
144    END { for (dir in files) print dir, files[dir] }'
145am__base_list = \
146  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
147  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
148am__uninstall_files_from_dir = { \
149  test -z "$$files" \
150    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
151    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
152         $(am__cd) "$$dir" && rm -f $$files; }; \
153  }
154am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
155DATA = $(pkgconfig_DATA)
156RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
157  distclean-recursive maintainer-clean-recursive
158am__recursive_targets = \
159  $(RECURSIVE_TARGETS) \
160  $(RECURSIVE_CLEAN_TARGETS) \
161  $(am__extra_recursive_targets)
162AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
163	cscope distdir dist dist-all distcheck
164am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
165	$(LISP)config.h.in
166# Read a list of newline-separated strings from the standard input,
167# and print each of them once, without duplicates.  Input order is
168# *not* preserved.
169am__uniquify_input = $(AWK) '\
170  BEGIN { nonempty = 0; } \
171  { items[$$0] = 1; nonempty = 1; } \
172  END { if (nonempty) { for (i in items) print i; }; } \
173'
174# Make sure the list of sources is unique.  This is necessary because,
175# e.g., the same source file might be shared among _SOURCES variables
176# for different programs/libraries.
177am__define_uniq_tagged_files = \
178  list='$(am__tagged_files)'; \
179  unique=`for i in $$list; do \
180    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
181  done | $(am__uniquify_input)`
182ETAGS = etags
183CTAGS = ctags
184CSCOPE = cscope
185DIST_SUBDIRS = $(SUBDIRS)
186DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
187distdir = $(PACKAGE)-$(VERSION)
188top_distdir = $(distdir)
189am__remove_distdir = \
190  if test -d "$(distdir)"; then \
191    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
192      && rm -rf "$(distdir)" \
193      || { sleep 5 && rm -rf "$(distdir)"; }; \
194  else :; fi
195am__post_remove_distdir = $(am__remove_distdir)
196am__relativize = \
197  dir0=`pwd`; \
198  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
199  sed_rest='s,^[^/]*/*,,'; \
200  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
201  sed_butlast='s,/*[^/]*$$,,'; \
202  while test -n "$$dir1"; do \
203    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
204    if test "$$first" != "."; then \
205      if test "$$first" = ".."; then \
206        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
207        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
208      else \
209        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
210        if test "$$first2" = "$$first"; then \
211          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
212        else \
213          dir2="../$$dir2"; \
214        fi; \
215        dir0="$$dir0"/"$$first"; \
216      fi; \
217    fi; \
218    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
219  done; \
220  reldir="$$dir2"
221DIST_ARCHIVES = $(distdir).tar.gz
222GZIP_ENV = --best
223DIST_TARGETS = dist-gzip
224distuninstallcheck_listfiles = find . -type f -print
225am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
226  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
227distcleancheck_listfiles = find . -type f -print
228ACLOCAL = @ACLOCAL@
229AMTAR = @AMTAR@
230AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
231AR = @AR@
232AUTOCONF = @AUTOCONF@
233AUTOHEADER = @AUTOHEADER@
234AUTOMAKE = @AUTOMAKE@
235AWK = @AWK@
236CC = @CC@
237CCDEPMODE = @CCDEPMODE@
238CFLAGS = @CFLAGS@
239CPP = @CPP@
240CPPFLAGS = @CPPFLAGS@
241CYGPATH_W = @CYGPATH_W@
242DEFS = @DEFS@
243DEPDIR = @DEPDIR@
244DLLTOOL = @DLLTOOL@
245DSYMUTIL = @DSYMUTIL@
246DUMPBIN = @DUMPBIN@
247ECHO_C = @ECHO_C@
248ECHO_N = @ECHO_N@
249ECHO_T = @ECHO_T@
250EGREP = @EGREP@
251EXEEXT = @EXEEXT@
252FGREP = @FGREP@
253GREP = @GREP@
254INSTALL = @INSTALL@
255INSTALL_DATA = @INSTALL_DATA@
256INSTALL_PROGRAM = @INSTALL_PROGRAM@
257INSTALL_SCRIPT = @INSTALL_SCRIPT@
258INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
259LD = @LD@
260LDFLAGS = @LDFLAGS@
261LIBOBJS = @LIBOBJS@
262LIBS = @LIBS@
263LIBTOOL = @LIBTOOL@
264LIPO = @LIPO@
265LN_S = @LN_S@
266LTLIBOBJS = @LTLIBOBJS@
267LT_VERSION = @LT_VERSION@
268MAKEINFO = @MAKEINFO@
269MANIFEST_TOOL = @MANIFEST_TOOL@
270MANTYPE = @MANTYPE@
271MKDIR_P = @MKDIR_P@
272NM = @NM@
273NMEDIT = @NMEDIT@
274NROFF = @NROFF@
275OBJDUMP = @OBJDUMP@
276OBJEXT = @OBJEXT@
277OTOOL = @OTOOL@
278OTOOL64 = @OTOOL64@
279PACKAGE = @PACKAGE@
280PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
281PACKAGE_NAME = @PACKAGE_NAME@
282PACKAGE_STRING = @PACKAGE_STRING@
283PACKAGE_TARNAME = @PACKAGE_TARNAME@
284PACKAGE_URL = @PACKAGE_URL@
285PACKAGE_VERSION = @PACKAGE_VERSION@
286PATH_SEPARATOR = @PATH_SEPARATOR@
287RANLIB = @RANLIB@
288SED = @SED@
289SET_MAKE = @SET_MAKE@
290SHELL = @SHELL@
291STRIP = @STRIP@
292VERSION = @VERSION@
293abs_builddir = @abs_builddir@
294abs_srcdir = @abs_srcdir@
295abs_top_builddir = @abs_top_builddir@
296abs_top_srcdir = @abs_top_srcdir@
297ac_ct_AR = @ac_ct_AR@
298ac_ct_CC = @ac_ct_CC@
299ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
300am__include = @am__include@
301am__leading_dot = @am__leading_dot@
302am__quote = @am__quote@
303am__tar = @am__tar@
304am__untar = @am__untar@
305bindir = @bindir@
306build = @build@
307build_alias = @build_alias@
308build_cpu = @build_cpu@
309build_os = @build_os@
310build_vendor = @build_vendor@
311builddir = @builddir@
312datadir = @datadir@
313datarootdir = @datarootdir@
314docdir = @docdir@
315dvidir = @dvidir@
316exec_prefix = @exec_prefix@
317host = @host@
318host_alias = @host_alias@
319host_cpu = @host_cpu@
320host_os = @host_os@
321host_vendor = @host_vendor@
322htmldir = @htmldir@
323includedir = @includedir@
324infodir = @infodir@
325install_sh = @install_sh@
326libdir = @libdir@
327libexecdir = @libexecdir@
328localedir = @localedir@
329localstatedir = @localstatedir@
330mandir = @mandir@
331mkdir_p = @mkdir_p@
332oldincludedir = @oldincludedir@
333pdfdir = @pdfdir@
334prefix = @prefix@
335program_transform_name = @program_transform_name@
336psdir = @psdir@
337sbindir = @sbindir@
338sharedstatedir = @sharedstatedir@
339srcdir = @srcdir@
340sysconfdir = @sysconfdir@
341target_alias = @target_alias@
342top_build_prefix = @top_build_prefix@
343top_builddir = @top_builddir@
344top_srcdir = @top_srcdir@
345AUTOMAKE_OPTIONS = foreign
346ACLOCAL_AMFLAGS = -I m4
347SUBDIRS = src examples doc
348EXTRA_DIST = libedit.pc.in
349pkgconfigdir = $(libdir)/pkgconfig
350pkgconfig_DATA = libedit.pc
351all: config.h
352	$(MAKE) $(AM_MAKEFLAGS) all-recursive
353
354.SUFFIXES:
355am--refresh: Makefile
356	@:
357$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
358	@for dep in $?; do \
359	  case '$(am__configure_deps)' in \
360	    *$$dep*) \
361	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
362	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
363		&& exit 0; \
364	      exit 1;; \
365	  esac; \
366	done; \
367	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
368	$(am__cd) $(top_srcdir) && \
369	  $(AUTOMAKE) --foreign Makefile
370.PRECIOUS: Makefile
371Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
372	@case '$?' in \
373	  *config.status*) \
374	    echo ' $(SHELL) ./config.status'; \
375	    $(SHELL) ./config.status;; \
376	  *) \
377	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
378	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
379	esac;
380
381$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
382	$(SHELL) ./config.status --recheck
383
384$(top_srcdir)/configure:  $(am__configure_deps)
385	$(am__cd) $(srcdir) && $(AUTOCONF)
386$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
387	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
388$(am__aclocal_m4_deps):
389
390config.h: stamp-h1
391	@test -f $@ || rm -f stamp-h1
392	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
393
394stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
395	@rm -f stamp-h1
396	cd $(top_builddir) && $(SHELL) ./config.status config.h
397$(srcdir)/config.h.in:  $(am__configure_deps) 
398	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
399	rm -f stamp-h1
400	touch $@
401
402distclean-hdr:
403	-rm -f config.h stamp-h1
404libedit.pc: $(top_builddir)/config.status $(srcdir)/libedit.pc.in
405	cd $(top_builddir) && $(SHELL) ./config.status $@
406
407mostlyclean-libtool:
408	-rm -f *.lo
409
410clean-libtool:
411	-rm -rf .libs _libs
412
413distclean-libtool:
414	-rm -f libtool config.lt
415install-pkgconfigDATA: $(pkgconfig_DATA)
416	@$(NORMAL_INSTALL)
417	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
418	if test -n "$$list"; then \
419	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
420	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
421	fi; \
422	for p in $$list; do \
423	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
424	  echo "$$d$$p"; \
425	done | $(am__base_list) | \
426	while read files; do \
427	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
428	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
429	done
430
431uninstall-pkgconfigDATA:
432	@$(NORMAL_UNINSTALL)
433	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
434	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
435	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
436
437# This directory's subdirectories are mostly independent; you can cd
438# into them and run 'make' without going through this Makefile.
439# To change the values of 'make' variables: instead of editing Makefiles,
440# (1) if the variable is set in 'config.status', edit 'config.status'
441#     (which will cause the Makefiles to be regenerated when you run 'make');
442# (2) otherwise, pass the desired values on the 'make' command line.
443$(am__recursive_targets):
444	@fail=; \
445	if $(am__make_keepgoing); then \
446	  failcom='fail=yes'; \
447	else \
448	  failcom='exit 1'; \
449	fi; \
450	dot_seen=no; \
451	target=`echo $@ | sed s/-recursive//`; \
452	case "$@" in \
453	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
454	  *) list='$(SUBDIRS)' ;; \
455	esac; \
456	for subdir in $$list; do \
457	  echo "Making $$target in $$subdir"; \
458	  if test "$$subdir" = "."; then \
459	    dot_seen=yes; \
460	    local_target="$$target-am"; \
461	  else \
462	    local_target="$$target"; \
463	  fi; \
464	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
465	  || eval $$failcom; \
466	done; \
467	if test "$$dot_seen" = "no"; then \
468	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
469	fi; test -z "$$fail"
470
471ID: $(am__tagged_files)
472	$(am__define_uniq_tagged_files); mkid -fID $$unique
473tags: tags-recursive
474TAGS: tags
475
476tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
477	set x; \
478	here=`pwd`; \
479	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
480	  include_option=--etags-include; \
481	  empty_fix=.; \
482	else \
483	  include_option=--include; \
484	  empty_fix=; \
485	fi; \
486	list='$(SUBDIRS)'; for subdir in $$list; do \
487	  if test "$$subdir" = .; then :; else \
488	    test ! -f $$subdir/TAGS || \
489	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
490	  fi; \
491	done; \
492	$(am__define_uniq_tagged_files); \
493	shift; \
494	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
495	  test -n "$$unique" || unique=$$empty_fix; \
496	  if test $$# -gt 0; then \
497	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
498	      "$$@" $$unique; \
499	  else \
500	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
501	      $$unique; \
502	  fi; \
503	fi
504ctags: ctags-recursive
505
506CTAGS: ctags
507ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
508	$(am__define_uniq_tagged_files); \
509	test -z "$(CTAGS_ARGS)$$unique" \
510	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
511	     $$unique
512
513GTAGS:
514	here=`$(am__cd) $(top_builddir) && pwd` \
515	  && $(am__cd) $(top_srcdir) \
516	  && gtags -i $(GTAGS_ARGS) "$$here"
517cscope: cscope.files
518	test ! -s cscope.files \
519	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
520clean-cscope:
521	-rm -f cscope.files
522cscope.files: clean-cscope cscopelist
523cscopelist: cscopelist-recursive
524
525cscopelist-am: $(am__tagged_files)
526	list='$(am__tagged_files)'; \
527	case "$(srcdir)" in \
528	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
529	  *) sdir=$(subdir)/$(srcdir) ;; \
530	esac; \
531	for i in $$list; do \
532	  if test -f "$$i"; then \
533	    echo "$(subdir)/$$i"; \
534	  else \
535	    echo "$$sdir/$$i"; \
536	  fi; \
537	done >> $(top_builddir)/cscope.files
538
539distclean-tags:
540	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
541	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
542
543distdir: $(DISTFILES)
544	$(am__remove_distdir)
545	test -d "$(distdir)" || mkdir "$(distdir)"
546	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
547	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
548	list='$(DISTFILES)'; \
549	  dist_files=`for file in $$list; do echo $$file; done | \
550	  sed -e "s|^$$srcdirstrip/||;t" \
551	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
552	case $$dist_files in \
553	  */*) $(MKDIR_P) `echo "$$dist_files" | \
554			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
555			   sort -u` ;; \
556	esac; \
557	for file in $$dist_files; do \
558	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
559	  if test -d $$d/$$file; then \
560	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
561	    if test -d "$(distdir)/$$file"; then \
562	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
563	    fi; \
564	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
565	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
566	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
567	    fi; \
568	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
569	  else \
570	    test -f "$(distdir)/$$file" \
571	    || cp -p $$d/$$file "$(distdir)/$$file" \
572	    || exit 1; \
573	  fi; \
574	done
575	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
576	  if test "$$subdir" = .; then :; else \
577	    $(am__make_dryrun) \
578	      || test -d "$(distdir)/$$subdir" \
579	      || $(MKDIR_P) "$(distdir)/$$subdir" \
580	      || exit 1; \
581	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
582	    $(am__relativize); \
583	    new_distdir=$$reldir; \
584	    dir1=$$subdir; dir2="$(top_distdir)"; \
585	    $(am__relativize); \
586	    new_top_distdir=$$reldir; \
587	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
588	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
589	    ($(am__cd) $$subdir && \
590	      $(MAKE) $(AM_MAKEFLAGS) \
591	        top_distdir="$$new_top_distdir" \
592	        distdir="$$new_distdir" \
593		am__remove_distdir=: \
594		am__skip_length_check=: \
595		am__skip_mode_fix=: \
596	        distdir) \
597	      || exit 1; \
598	  fi; \
599	done
600	-test -n "$(am__skip_mode_fix)" \
601	|| find "$(distdir)" -type d ! -perm -755 \
602		-exec chmod u+rwx,go+rx {} \; -o \
603	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
604	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
605	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
606	|| chmod -R a+r "$(distdir)"
607dist-gzip: distdir
608	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
609	$(am__post_remove_distdir)
610
611dist-bzip2: distdir
612	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
613	$(am__post_remove_distdir)
614
615dist-lzip: distdir
616	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
617	$(am__post_remove_distdir)
618
619dist-xz: distdir
620	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
621	$(am__post_remove_distdir)
622
623dist-tarZ: distdir
624	@echo WARNING: "Support for shar distribution archives is" \
625	               "deprecated." >&2
626	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
627	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
628	$(am__post_remove_distdir)
629
630dist-shar: distdir
631	@echo WARNING: "Support for distribution archives compressed with" \
632		       "legacy program 'compress' is deprecated." >&2
633	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
634	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
635	$(am__post_remove_distdir)
636
637dist-zip: distdir
638	-rm -f $(distdir).zip
639	zip -rq $(distdir).zip $(distdir)
640	$(am__post_remove_distdir)
641
642dist dist-all:
643	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
644	$(am__post_remove_distdir)
645
646# This target untars the dist file and tries a VPATH configuration.  Then
647# it guarantees that the distribution is self-contained by making another
648# tarfile.
649distcheck: dist
650	case '$(DIST_ARCHIVES)' in \
651	*.tar.gz*) \
652	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
653	*.tar.bz2*) \
654	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
655	*.tar.lz*) \
656	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
657	*.tar.xz*) \
658	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
659	*.tar.Z*) \
660	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
661	*.shar.gz*) \
662	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
663	*.zip*) \
664	  unzip $(distdir).zip ;;\
665	esac
666	chmod -R a-w $(distdir)
667	chmod u+w $(distdir)
668	mkdir $(distdir)/_build $(distdir)/_inst
669	chmod a-w $(distdir)
670	test -d $(distdir)/_build || exit 0; \
671	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
672	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
673	  && am__cwd=`pwd` \
674	  && $(am__cd) $(distdir)/_build \
675	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
676	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
677	    $(DISTCHECK_CONFIGURE_FLAGS) \
678	  && $(MAKE) $(AM_MAKEFLAGS) \
679	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
680	  && $(MAKE) $(AM_MAKEFLAGS) check \
681	  && $(MAKE) $(AM_MAKEFLAGS) install \
682	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
683	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
684	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
685	        distuninstallcheck \
686	  && chmod -R a-w "$$dc_install_base" \
687	  && ({ \
688	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
689	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
690	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
691	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
692	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
693	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
694	  && rm -rf "$$dc_destdir" \
695	  && $(MAKE) $(AM_MAKEFLAGS) dist \
696	  && rm -rf $(DIST_ARCHIVES) \
697	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
698	  && cd "$$am__cwd" \
699	  || exit 1
700	$(am__post_remove_distdir)
701	@(echo "$(distdir) archives ready for distribution: "; \
702	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
703	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
704distuninstallcheck:
705	@test -n '$(distuninstallcheck_dir)' || { \
706	  echo 'ERROR: trying to run $@ with an empty' \
707	       '$$(distuninstallcheck_dir)' >&2; \
708	  exit 1; \
709	}; \
710	$(am__cd) '$(distuninstallcheck_dir)' || { \
711	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
712	  exit 1; \
713	}; \
714	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
715	   || { echo "ERROR: files left after uninstall:" ; \
716	        if test -n "$(DESTDIR)"; then \
717	          echo "  (check DESTDIR support)"; \
718	        fi ; \
719	        $(distuninstallcheck_listfiles) ; \
720	        exit 1; } >&2
721distcleancheck: distclean
722	@if test '$(srcdir)' = . ; then \
723	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
724	  exit 1 ; \
725	fi
726	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
727	  || { echo "ERROR: files left in build directory after distclean:" ; \
728	       $(distcleancheck_listfiles) ; \
729	       exit 1; } >&2
730check-am: all-am
731check: check-recursive
732all-am: Makefile $(DATA) config.h
733installdirs: installdirs-recursive
734installdirs-am:
735	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
736	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
737	done
738install: install-recursive
739install-exec: install-exec-recursive
740install-data: install-data-recursive
741uninstall: uninstall-recursive
742
743install-am: all-am
744	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
745
746installcheck: installcheck-recursive
747install-strip:
748	if test -z '$(STRIP)'; then \
749	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
750	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
751	      install; \
752	else \
753	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
754	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
755	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
756	fi
757mostlyclean-generic:
758
759clean-generic:
760
761distclean-generic:
762	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
763	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
764
765maintainer-clean-generic:
766	@echo "This command is intended for maintainers to use"
767	@echo "it deletes files that may require special tools to rebuild."
768clean: clean-recursive
769
770clean-am: clean-generic clean-libtool mostlyclean-am
771
772distclean: distclean-recursive
773	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
774	-rm -f Makefile
775distclean-am: clean-am distclean-generic distclean-hdr \
776	distclean-libtool distclean-tags
777
778dvi: dvi-recursive
779
780dvi-am:
781
782html: html-recursive
783
784html-am:
785
786info: info-recursive
787
788info-am:
789
790install-data-am: install-pkgconfigDATA
791
792install-dvi: install-dvi-recursive
793
794install-dvi-am:
795
796install-exec-am:
797
798install-html: install-html-recursive
799
800install-html-am:
801
802install-info: install-info-recursive
803
804install-info-am:
805
806install-man:
807
808install-pdf: install-pdf-recursive
809
810install-pdf-am:
811
812install-ps: install-ps-recursive
813
814install-ps-am:
815
816installcheck-am:
817
818maintainer-clean: maintainer-clean-recursive
819	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
820	-rm -rf $(top_srcdir)/autom4te.cache
821	-rm -f Makefile
822maintainer-clean-am: distclean-am maintainer-clean-generic
823
824mostlyclean: mostlyclean-recursive
825
826mostlyclean-am: mostlyclean-generic mostlyclean-libtool
827
828pdf: pdf-recursive
829
830pdf-am:
831
832ps: ps-recursive
833
834ps-am:
835
836uninstall-am: uninstall-pkgconfigDATA
837
838.MAKE: $(am__recursive_targets) all install-am install-strip
839
840.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
841	am--refresh check check-am clean clean-cscope clean-generic \
842	clean-libtool cscope cscopelist-am ctags ctags-am dist \
843	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
844	dist-xz dist-zip distcheck distclean distclean-generic \
845	distclean-hdr distclean-libtool distclean-tags distcleancheck \
846	distdir distuninstallcheck dvi dvi-am html html-am info \
847	info-am install install-am install-data install-data-am \
848	install-dvi install-dvi-am install-exec install-exec-am \
849	install-html install-html-am install-info install-info-am \
850	install-man install-pdf install-pdf-am install-pkgconfigDATA \
851	install-ps install-ps-am install-strip installcheck \
852	installcheck-am installdirs installdirs-am maintainer-clean \
853	maintainer-clean-generic mostlyclean mostlyclean-generic \
854	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
855	uninstall-am uninstall-pkgconfigDATA
856
857
858# Tell versions [3.59,3.63) of GNU make to not export all variables.
859# Otherwise a system limit (for SysV at least) may be exceeded.
860.NOEXPORT:
861