X86InstrInfo.h revision dda3978d7877d2d60390833c73ed24857295e89c
1//===- X86InstrInfo.h - X86 Instruction Information ------------*- C++ -*- ===// 2// 3// The LLVM Compiler Infrastructure 4// 5// This file is distributed under the University of Illinois Open Source 6// License. See LICENSE.TXT for details. 7// 8//===----------------------------------------------------------------------===// 9// 10// This file contains the X86 implementation of the TargetInstrInfo class. 11// 12//===----------------------------------------------------------------------===// 13 14#ifndef X86INSTRUCTIONINFO_H 15#define X86INSTRUCTIONINFO_H 16 17#include "llvm/Target/TargetInstrInfo.h" 18#include "X86.h" 19#include "X86RegisterInfo.h" 20#include "llvm/ADT/DenseMap.h" 21#include "llvm/Target/TargetRegisterInfo.h" 22 23namespace llvm { 24 class X86RegisterInfo; 25 class X86TargetMachine; 26 27namespace X86 { 28 // X86 specific condition code. These correspond to X86_*_COND in 29 // X86InstrInfo.td. They must be kept in synch. 30 enum CondCode { 31 COND_A = 0, 32 COND_AE = 1, 33 COND_B = 2, 34 COND_BE = 3, 35 COND_E = 4, 36 COND_G = 5, 37 COND_GE = 6, 38 COND_L = 7, 39 COND_LE = 8, 40 COND_NE = 9, 41 COND_NO = 10, 42 COND_NP = 11, 43 COND_NS = 12, 44 COND_O = 13, 45 COND_P = 14, 46 COND_S = 15, 47 48 // Artificial condition codes. These are used by AnalyzeBranch 49 // to indicate a block terminated with two conditional branches to 50 // the same location. This occurs in code using FCMP_OEQ or FCMP_UNE, 51 // which can't be represented on x86 with a single condition. These 52 // are never used in MachineInstrs. 53 COND_NE_OR_P, 54 COND_NP_OR_E, 55 56 COND_INVALID 57 }; 58 59 // Turn condition code into conditional branch opcode. 60 unsigned GetCondBranchFromCond(CondCode CC); 61 62 /// GetOppositeBranchCondition - Return the inverse of the specified cond, 63 /// e.g. turning COND_E to COND_NE. 64 CondCode GetOppositeBranchCondition(X86::CondCode CC); 65 66} 67 68/// X86II - This namespace holds all of the target specific flags that 69/// instruction info tracks. 70/// 71namespace X86II { 72 /// Target Operand Flag enum. 73 enum TOF { 74 //===------------------------------------------------------------------===// 75 // X86 Specific MachineOperand flags. 76 77 MO_NO_FLAG, 78 79 /// MO_GOT_ABSOLUTE_ADDRESS - On a symbol operand, this represents a 80 /// relocation of: 81 /// SYMBOL_LABEL + [. - PICBASELABEL] 82 MO_GOT_ABSOLUTE_ADDRESS, 83 84 /// MO_PIC_BASE_OFFSET - On a symbol operand this indicates that the 85 /// immediate should get the value of the symbol minus the PIC base label: 86 /// SYMBOL_LABEL - PICBASELABEL 87 MO_PIC_BASE_OFFSET, 88 89 /// MO_GOT - On a symbol operand this indicates that the immediate is the 90 /// offset to the GOT entry for the symbol name from the base of the GOT. 91 /// 92 /// See the X86-64 ELF ABI supplement for more details. 93 /// SYMBOL_LABEL @GOT 94 MO_GOT, 95 96 /// MO_GOTOFF - On a symbol operand this indicates that the immediate is 97 /// the offset to the location of the symbol name from the base of the GOT. 98 /// 99 /// See the X86-64 ELF ABI supplement for more details. 100 /// SYMBOL_LABEL @GOTOFF 101 MO_GOTOFF, 102 103 /// MO_GOTPCREL - On a symbol operand this indicates that the immediate is 104 /// offset to the GOT entry for the symbol name from the current code 105 /// location. 106 /// 107 /// See the X86-64 ELF ABI supplement for more details. 108 /// SYMBOL_LABEL @GOTPCREL 109 MO_GOTPCREL, 110 111 /// MO_PLT - On a symbol operand this indicates that the immediate is 112 /// offset to the PLT entry of symbol name from the current code location. 113 /// 114 /// See the X86-64 ELF ABI supplement for more details. 115 /// SYMBOL_LABEL @PLT 116 MO_PLT, 117 118 /// MO_TLSGD - On a symbol operand this indicates that the immediate is 119 /// some TLS offset. 120 /// 121 /// See 'ELF Handling for Thread-Local Storage' for more details. 122 /// SYMBOL_LABEL @TLSGD 123 MO_TLSGD, 124 125 /// MO_GOTTPOFF - On a symbol operand this indicates that the immediate is 126 /// some TLS offset. 127 /// 128 /// See 'ELF Handling for Thread-Local Storage' for more details. 129 /// SYMBOL_LABEL @GOTTPOFF 130 MO_GOTTPOFF, 131 132 /// MO_INDNTPOFF - On a symbol operand this indicates that the immediate is 133 /// some TLS offset. 134 /// 135 /// See 'ELF Handling for Thread-Local Storage' for more details. 136 /// SYMBOL_LABEL @INDNTPOFF 137 MO_INDNTPOFF, 138 139 /// MO_TPOFF - On a symbol operand this indicates that the immediate is 140 /// some TLS offset. 141 /// 142 /// See 'ELF Handling for Thread-Local Storage' for more details. 143 /// SYMBOL_LABEL @TPOFF 144 MO_TPOFF, 145 146 /// MO_NTPOFF - On a symbol operand this indicates that the immediate is 147 /// some TLS offset. 148 /// 149 /// See 'ELF Handling for Thread-Local Storage' for more details. 150 /// SYMBOL_LABEL @NTPOFF 151 MO_NTPOFF, 152 153 /// MO_DLLIMPORT - On a symbol operand "FOO", this indicates that the 154 /// reference is actually to the "__imp_FOO" symbol. This is used for 155 /// dllimport linkage on windows. 156 MO_DLLIMPORT, 157 158 /// MO_DARWIN_STUB - On a symbol operand "FOO", this indicates that the 159 /// reference is actually to the "FOO$stub" symbol. This is used for calls 160 /// and jumps to external functions on Tiger and before. 161 MO_DARWIN_STUB, 162 163 /// MO_DARWIN_NONLAZY - On a symbol operand "FOO", this indicates that the 164 /// reference is actually to the "FOO$non_lazy_ptr" symbol, which is a 165 /// non-PIC-base-relative reference to a non-hidden dyld lazy pointer stub. 166 MO_DARWIN_NONLAZY, 167 168 /// MO_DARWIN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this indicates 169 /// that the reference is actually to "FOO$non_lazy_ptr - PICBASE", which is 170 /// a PIC-base-relative reference to a non-hidden dyld lazy pointer stub. 171 MO_DARWIN_NONLAZY_PIC_BASE, 172 173 /// MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this 174 /// indicates that the reference is actually to "FOO$non_lazy_ptr -PICBASE", 175 /// which is a PIC-base-relative reference to a hidden dyld lazy pointer 176 /// stub. 177 MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE 178 }; 179} 180 181/// isGlobalStubReference - Return true if the specified TargetFlag operand is 182/// a reference to a stub for a global, not the global itself. 183inline static bool isGlobalStubReference(unsigned char TargetFlag) { 184 switch (TargetFlag) { 185 case X86II::MO_DLLIMPORT: // dllimport stub. 186 case X86II::MO_GOTPCREL: // rip-relative GOT reference. 187 case X86II::MO_GOT: // normal GOT reference. 188 case X86II::MO_DARWIN_NONLAZY_PIC_BASE: // Normal $non_lazy_ptr ref. 189 case X86II::MO_DARWIN_NONLAZY: // Normal $non_lazy_ptr ref. 190 case X86II::MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE: // Hidden $non_lazy_ptr ref. 191 return true; 192 default: 193 return false; 194 } 195} 196 197/// isGlobalRelativeToPICBase - Return true if the specified global value 198/// reference is relative to a 32-bit PIC base (X86ISD::GlobalBaseReg). If this 199/// is true, the addressing mode has the PIC base register added in (e.g. EBX). 200inline static bool isGlobalRelativeToPICBase(unsigned char TargetFlag) { 201 switch (TargetFlag) { 202 case X86II::MO_GOTOFF: // isPICStyleGOT: local global. 203 case X86II::MO_GOT: // isPICStyleGOT: other global. 204 case X86II::MO_PIC_BASE_OFFSET: // Darwin local global. 205 case X86II::MO_DARWIN_NONLAZY_PIC_BASE: // Darwin/32 external global. 206 case X86II::MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE: // Darwin/32 hidden global. 207 return true; 208 default: 209 return false; 210 } 211} 212 213/// X86II - This namespace holds all of the target specific flags that 214/// instruction info tracks. 215/// 216namespace X86II { 217 enum { 218 //===------------------------------------------------------------------===// 219 // Instruction encodings. These are the standard/most common forms for X86 220 // instructions. 221 // 222 223 // PseudoFrm - This represents an instruction that is a pseudo instruction 224 // or one that has not been implemented yet. It is illegal to code generate 225 // it, but tolerated for intermediate implementation stages. 226 Pseudo = 0, 227 228 /// Raw - This form is for instructions that don't have any operands, so 229 /// they are just a fixed opcode value, like 'leave'. 230 RawFrm = 1, 231 232 /// AddRegFrm - This form is used for instructions like 'push r32' that have 233 /// their one register operand added to their opcode. 234 AddRegFrm = 2, 235 236 /// MRMDestReg - This form is used for instructions that use the Mod/RM byte 237 /// to specify a destination, which in this case is a register. 238 /// 239 MRMDestReg = 3, 240 241 /// MRMDestMem - This form is used for instructions that use the Mod/RM byte 242 /// to specify a destination, which in this case is memory. 243 /// 244 MRMDestMem = 4, 245 246 /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte 247 /// to specify a source, which in this case is a register. 248 /// 249 MRMSrcReg = 5, 250 251 /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte 252 /// to specify a source, which in this case is memory. 253 /// 254 MRMSrcMem = 6, 255 256 /// MRM[0-7][rm] - These forms are used to represent instructions that use 257 /// a Mod/RM byte, and use the middle field to hold extended opcode 258 /// information. In the intel manual these are represented as /0, /1, ... 259 /// 260 261 // First, instructions that operate on a register r/m operand... 262 MRM0r = 16, MRM1r = 17, MRM2r = 18, MRM3r = 19, // Format /0 /1 /2 /3 263 MRM4r = 20, MRM5r = 21, MRM6r = 22, MRM7r = 23, // Format /4 /5 /6 /7 264 265 // Next, instructions that operate on a memory r/m operand... 266 MRM0m = 24, MRM1m = 25, MRM2m = 26, MRM3m = 27, // Format /0 /1 /2 /3 267 MRM4m = 28, MRM5m = 29, MRM6m = 30, MRM7m = 31, // Format /4 /5 /6 /7 268 269 // MRMInitReg - This form is used for instructions whose source and 270 // destinations are the same register. 271 MRMInitReg = 32, 272 273 FormMask = 63, 274 275 //===------------------------------------------------------------------===// 276 // Actual flags... 277 278 // OpSize - Set if this instruction requires an operand size prefix (0x66), 279 // which most often indicates that the instruction operates on 16 bit data 280 // instead of 32 bit data. 281 OpSize = 1 << 6, 282 283 // AsSize - Set if this instruction requires an operand size prefix (0x67), 284 // which most often indicates that the instruction address 16 bit address 285 // instead of 32 bit address (or 32 bit address in 64 bit mode). 286 AdSize = 1 << 7, 287 288 //===------------------------------------------------------------------===// 289 // Op0Mask - There are several prefix bytes that are used to form two byte 290 // opcodes. These are currently 0x0F, 0xF3, and 0xD8-0xDF. This mask is 291 // used to obtain the setting of this field. If no bits in this field is 292 // set, there is no prefix byte for obtaining a multibyte opcode. 293 // 294 Op0Shift = 8, 295 Op0Mask = 0xF << Op0Shift, 296 297 // TB - TwoByte - Set if this instruction has a two byte opcode, which 298 // starts with a 0x0F byte before the real opcode. 299 TB = 1 << Op0Shift, 300 301 // REP - The 0xF3 prefix byte indicating repetition of the following 302 // instruction. 303 REP = 2 << Op0Shift, 304 305 // D8-DF - These escape opcodes are used by the floating point unit. These 306 // values must remain sequential. 307 D8 = 3 << Op0Shift, D9 = 4 << Op0Shift, 308 DA = 5 << Op0Shift, DB = 6 << Op0Shift, 309 DC = 7 << Op0Shift, DD = 8 << Op0Shift, 310 DE = 9 << Op0Shift, DF = 10 << Op0Shift, 311 312 // XS, XD - These prefix codes are for single and double precision scalar 313 // floating point operations performed in the SSE registers. 314 XD = 11 << Op0Shift, XS = 12 << Op0Shift, 315 316 // T8, TA - Prefix after the 0x0F prefix. 317 T8 = 13 << Op0Shift, TA = 14 << Op0Shift, 318 319 // TF - Prefix before and after 0x0F 320 TF = 15 << Op0Shift, 321 322 //===------------------------------------------------------------------===// 323 // REX_W - REX prefixes are instruction prefixes used in 64-bit mode. 324 // They are used to specify GPRs and SSE registers, 64-bit operand size, 325 // etc. We only cares about REX.W and REX.R bits and only the former is 326 // statically determined. 327 // 328 REXShift = 12, 329 REX_W = 1 << REXShift, 330 331 //===------------------------------------------------------------------===// 332 // This three-bit field describes the size of an immediate operand. Zero is 333 // unused so that we can tell if we forgot to set a value. 334 ImmShift = 13, 335 ImmMask = 7 << ImmShift, 336 Imm8 = 1 << ImmShift, 337 Imm16 = 2 << ImmShift, 338 Imm32 = 3 << ImmShift, 339 Imm64 = 4 << ImmShift, 340 341 //===------------------------------------------------------------------===// 342 // FP Instruction Classification... Zero is non-fp instruction. 343 344 // FPTypeMask - Mask for all of the FP types... 345 FPTypeShift = 16, 346 FPTypeMask = 7 << FPTypeShift, 347 348 // NotFP - The default, set for instructions that do not use FP registers. 349 NotFP = 0 << FPTypeShift, 350 351 // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 352 ZeroArgFP = 1 << FPTypeShift, 353 354 // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst 355 OneArgFP = 2 << FPTypeShift, 356 357 // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a 358 // result back to ST(0). For example, fcos, fsqrt, etc. 359 // 360 OneArgFPRW = 3 << FPTypeShift, 361 362 // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an 363 // explicit argument, storing the result to either ST(0) or the implicit 364 // argument. For example: fadd, fsub, fmul, etc... 365 TwoArgFP = 4 << FPTypeShift, 366 367 // CompareFP - 2 arg FP instructions which implicitly read ST(0) and an 368 // explicit argument, but have no destination. Example: fucom, fucomi, ... 369 CompareFP = 5 << FPTypeShift, 370 371 // CondMovFP - "2 operand" floating point conditional move instructions. 372 CondMovFP = 6 << FPTypeShift, 373 374 // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. 375 SpecialFP = 7 << FPTypeShift, 376 377 // Lock prefix 378 LOCKShift = 19, 379 LOCK = 1 << LOCKShift, 380 381 // Segment override prefixes. Currently we just need ability to address 382 // stuff in gs and fs segments. 383 SegOvrShift = 20, 384 SegOvrMask = 3 << SegOvrShift, 385 FS = 1 << SegOvrShift, 386 GS = 2 << SegOvrShift, 387 388 // Bits 22 -> 23 are unused 389 OpcodeShift = 24, 390 OpcodeMask = 0xFF << OpcodeShift 391 }; 392} 393 394const int X86AddrNumOperands = 5; 395 396inline static bool isScale(const MachineOperand &MO) { 397 return MO.isImm() && 398 (MO.getImm() == 1 || MO.getImm() == 2 || 399 MO.getImm() == 4 || MO.getImm() == 8); 400} 401 402inline static bool isLeaMem(const MachineInstr *MI, unsigned Op) { 403 if (MI->getOperand(Op).isFI()) return true; 404 return Op+4 <= MI->getNumOperands() && 405 MI->getOperand(Op ).isReg() && isScale(MI->getOperand(Op+1)) && 406 MI->getOperand(Op+2).isReg() && 407 (MI->getOperand(Op+3).isImm() || 408 MI->getOperand(Op+3).isGlobal() || 409 MI->getOperand(Op+3).isCPI() || 410 MI->getOperand(Op+3).isJTI()); 411} 412 413inline static bool isMem(const MachineInstr *MI, unsigned Op) { 414 if (MI->getOperand(Op).isFI()) return true; 415 return Op+5 <= MI->getNumOperands() && 416 MI->getOperand(Op+4).isReg() && 417 isLeaMem(MI, Op); 418} 419 420class X86InstrInfo : public TargetInstrInfoImpl { 421 X86TargetMachine &TM; 422 const X86RegisterInfo RI; 423 424 /// RegOp2MemOpTable2Addr, RegOp2MemOpTable0, RegOp2MemOpTable1, 425 /// RegOp2MemOpTable2 - Load / store folding opcode maps. 426 /// 427 DenseMap<unsigned*, std::pair<unsigned,unsigned> > RegOp2MemOpTable2Addr; 428 DenseMap<unsigned*, std::pair<unsigned,unsigned> > RegOp2MemOpTable0; 429 DenseMap<unsigned*, std::pair<unsigned,unsigned> > RegOp2MemOpTable1; 430 DenseMap<unsigned*, std::pair<unsigned,unsigned> > RegOp2MemOpTable2; 431 432 /// MemOp2RegOpTable - Load / store unfolding opcode map. 433 /// 434 DenseMap<unsigned*, std::pair<unsigned, unsigned> > MemOp2RegOpTable; 435 436public: 437 explicit X86InstrInfo(X86TargetMachine &tm); 438 439 /// getRegisterInfo - TargetInstrInfo is a superset of MRegister info. As 440 /// such, whenever a client has an instance of instruction info, it should 441 /// always be able to get register info as well (through this method). 442 /// 443 virtual const X86RegisterInfo &getRegisterInfo() const { return RI; } 444 445 /// Return true if the instruction is a register to register move and return 446 /// the source and dest operands and their sub-register indices by reference. 447 virtual bool isMoveInstr(const MachineInstr &MI, 448 unsigned &SrcReg, unsigned &DstReg, 449 unsigned &SrcSubIdx, unsigned &DstSubIdx) const; 450 451 unsigned isLoadFromStackSlot(const MachineInstr *MI, int &FrameIndex) const; 452 /// isLoadFromStackSlotPostFE - Check for post-frame ptr elimination 453 /// stack locations as well. This uses a heuristic so it isn't 454 /// reliable for correctness. 455 unsigned isLoadFromStackSlotPostFE(const MachineInstr *MI, 456 int &FrameIndex) const; 457 458 /// hasLoadFromStackSlot - If the specified machine instruction has 459 /// a load from a stack slot, return true along with the FrameIndex 460 /// of the loaded stack slot. If not, return false. Unlike 461 /// isLoadFromStackSlot, this returns true for any instructions that 462 /// loads from the stack. This is a hint only and may not catch all 463 /// cases. 464 bool hasLoadFromStackSlot(const MachineInstr *MI, int &FrameIndex) const; 465 466 unsigned isStoreToStackSlot(const MachineInstr *MI, int &FrameIndex) const; 467 /// isStoreToStackSlotPostFE - Check for post-frame ptr elimination 468 /// stack locations as well. This uses a heuristic so it isn't 469 /// reliable for correctness. 470 unsigned isStoreToStackSlotPostFE(const MachineInstr *MI, 471 int &FrameIndex) const; 472 473 /// hasStoreToStackSlot - If the specified machine instruction has a 474 /// store to a stack slot, return true along with the FrameIndex of 475 /// the loaded stack slot. If not, return false. Unlike 476 /// isStoreToStackSlot, this returns true for any instructions that 477 /// loads from the stack. This is a hint only and may not catch all 478 /// cases. 479 bool hasStoreToStackSlot(const MachineInstr *MI, int &FrameIndex) const; 480 481 bool isReallyTriviallyReMaterializable(const MachineInstr *MI, 482 AliasAnalysis *AA) const; 483 void reMaterialize(MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, 484 unsigned DestReg, unsigned SubIdx, 485 const MachineInstr *Orig) const; 486 487 /// convertToThreeAddress - This method must be implemented by targets that 488 /// set the M_CONVERTIBLE_TO_3_ADDR flag. When this flag is set, the target 489 /// may be able to convert a two-address instruction into a true 490 /// three-address instruction on demand. This allows the X86 target (for 491 /// example) to convert ADD and SHL instructions into LEA instructions if they 492 /// would require register copies due to two-addressness. 493 /// 494 /// This method returns a null pointer if the transformation cannot be 495 /// performed, otherwise it returns the new instruction. 496 /// 497 virtual MachineInstr *convertToThreeAddress(MachineFunction::iterator &MFI, 498 MachineBasicBlock::iterator &MBBI, 499 LiveVariables *LV) const; 500 501 /// commuteInstruction - We have a few instructions that must be hacked on to 502 /// commute them. 503 /// 504 virtual MachineInstr *commuteInstruction(MachineInstr *MI, bool NewMI) const; 505 506 // Branch analysis. 507 virtual bool isUnpredicatedTerminator(const MachineInstr* MI) const; 508 virtual bool AnalyzeBranch(MachineBasicBlock &MBB, MachineBasicBlock *&TBB, 509 MachineBasicBlock *&FBB, 510 SmallVectorImpl<MachineOperand> &Cond, 511 bool AllowModify) const; 512 virtual unsigned RemoveBranch(MachineBasicBlock &MBB) const; 513 virtual unsigned InsertBranch(MachineBasicBlock &MBB, MachineBasicBlock *TBB, 514 MachineBasicBlock *FBB, 515 const SmallVectorImpl<MachineOperand> &Cond) const; 516 virtual bool copyRegToReg(MachineBasicBlock &MBB, 517 MachineBasicBlock::iterator MI, 518 unsigned DestReg, unsigned SrcReg, 519 const TargetRegisterClass *DestRC, 520 const TargetRegisterClass *SrcRC) const; 521 virtual void storeRegToStackSlot(MachineBasicBlock &MBB, 522 MachineBasicBlock::iterator MI, 523 unsigned SrcReg, bool isKill, int FrameIndex, 524 const TargetRegisterClass *RC) const; 525 526 virtual void storeRegToAddr(MachineFunction &MF, unsigned SrcReg, bool isKill, 527 SmallVectorImpl<MachineOperand> &Addr, 528 const TargetRegisterClass *RC, 529 MachineInstr::mmo_iterator MMOBegin, 530 MachineInstr::mmo_iterator MMOEnd, 531 SmallVectorImpl<MachineInstr*> &NewMIs) const; 532 533 virtual void loadRegFromStackSlot(MachineBasicBlock &MBB, 534 MachineBasicBlock::iterator MI, 535 unsigned DestReg, int FrameIndex, 536 const TargetRegisterClass *RC) const; 537 538 virtual void loadRegFromAddr(MachineFunction &MF, unsigned DestReg, 539 SmallVectorImpl<MachineOperand> &Addr, 540 const TargetRegisterClass *RC, 541 MachineInstr::mmo_iterator MMOBegin, 542 MachineInstr::mmo_iterator MMOEnd, 543 SmallVectorImpl<MachineInstr*> &NewMIs) const; 544 545 virtual bool spillCalleeSavedRegisters(MachineBasicBlock &MBB, 546 MachineBasicBlock::iterator MI, 547 const std::vector<CalleeSavedInfo> &CSI) const; 548 549 virtual bool restoreCalleeSavedRegisters(MachineBasicBlock &MBB, 550 MachineBasicBlock::iterator MI, 551 const std::vector<CalleeSavedInfo> &CSI) const; 552 553 /// foldMemoryOperand - If this target supports it, fold a load or store of 554 /// the specified stack slot into the specified machine instruction for the 555 /// specified operand(s). If this is possible, the target should perform the 556 /// folding and return true, otherwise it should return false. If it folds 557 /// the instruction, it is likely that the MachineInstruction the iterator 558 /// references has been changed. 559 virtual MachineInstr* foldMemoryOperandImpl(MachineFunction &MF, 560 MachineInstr* MI, 561 const SmallVectorImpl<unsigned> &Ops, 562 int FrameIndex) const; 563 564 /// foldMemoryOperand - Same as the previous version except it allows folding 565 /// of any load and store from / to any address, not just from a specific 566 /// stack slot. 567 virtual MachineInstr* foldMemoryOperandImpl(MachineFunction &MF, 568 MachineInstr* MI, 569 const SmallVectorImpl<unsigned> &Ops, 570 MachineInstr* LoadMI) const; 571 572 /// canFoldMemoryOperand - Returns true if the specified load / store is 573 /// folding is possible. 574 virtual bool canFoldMemoryOperand(const MachineInstr*, 575 const SmallVectorImpl<unsigned> &) const; 576 577 /// unfoldMemoryOperand - Separate a single instruction which folded a load or 578 /// a store or a load and a store into two or more instruction. If this is 579 /// possible, returns true as well as the new instructions by reference. 580 virtual bool unfoldMemoryOperand(MachineFunction &MF, MachineInstr *MI, 581 unsigned Reg, bool UnfoldLoad, bool UnfoldStore, 582 SmallVectorImpl<MachineInstr*> &NewMIs) const; 583 584 virtual bool unfoldMemoryOperand(SelectionDAG &DAG, SDNode *N, 585 SmallVectorImpl<SDNode*> &NewNodes) const; 586 587 /// getOpcodeAfterMemoryUnfold - Returns the opcode of the would be new 588 /// instruction after load / store are unfolded from an instruction of the 589 /// specified opcode. It returns zero if the specified unfolding is not 590 /// possible. If LoadRegIndex is non-null, it is filled in with the operand 591 /// index of the operand which will hold the register holding the loaded 592 /// value. 593 virtual unsigned getOpcodeAfterMemoryUnfold(unsigned Opc, 594 bool UnfoldLoad, bool UnfoldStore, 595 unsigned *LoadRegIndex = 0) const; 596 597 virtual bool BlockHasNoFallThrough(const MachineBasicBlock &MBB) const; 598 virtual 599 bool ReverseBranchCondition(SmallVectorImpl<MachineOperand> &Cond) const; 600 601 /// isSafeToMoveRegClassDefs - Return true if it's safe to move a machine 602 /// instruction that defines the specified register class. 603 bool isSafeToMoveRegClassDefs(const TargetRegisterClass *RC) const; 604 605 // getBaseOpcodeFor - This function returns the "base" X86 opcode for the 606 // specified machine instruction. 607 // 608 unsigned char getBaseOpcodeFor(const TargetInstrDesc *TID) const { 609 return TID->TSFlags >> X86II::OpcodeShift; 610 } 611 unsigned char getBaseOpcodeFor(unsigned Opcode) const { 612 return getBaseOpcodeFor(&get(Opcode)); 613 } 614 615 static bool isX86_64NonExtLowByteReg(unsigned reg) { 616 return (reg == X86::SPL || reg == X86::BPL || 617 reg == X86::SIL || reg == X86::DIL); 618 } 619 620 static unsigned sizeOfImm(const TargetInstrDesc *Desc); 621 static bool isX86_64ExtendedReg(const MachineOperand &MO); 622 static unsigned determineREX(const MachineInstr &MI); 623 624 /// GetInstSize - Returns the size of the specified MachineInstr. 625 /// 626 virtual unsigned GetInstSizeInBytes(const MachineInstr *MI) const; 627 628 /// getGlobalBaseReg - Return a virtual register initialized with the 629 /// the global base register value. Output instructions required to 630 /// initialize the register in the function entry block, if necessary. 631 /// 632 unsigned getGlobalBaseReg(MachineFunction *MF) const; 633 634private: 635 MachineInstr* foldMemoryOperandImpl(MachineFunction &MF, 636 MachineInstr* MI, 637 unsigned OpNum, 638 const SmallVectorImpl<MachineOperand> &MOs, 639 unsigned Size, unsigned Alignment) const; 640 641 /// isFrameOperand - Return true and the FrameIndex if the specified 642 /// operand and follow operands form a reference to the stack frame. 643 bool isFrameOperand(const MachineInstr *MI, unsigned int Op, 644 int &FrameIndex) const; 645}; 646 647} // End llvm namespace 648 649#endif 650