1#if !defined(_FX_JPEG_TURBO_) 2/* 3 * jccoefct.c 4 * 5 * Copyright (C) 1994-1997, Thomas G. Lane. 6 * This file is part of the Independent JPEG Group's software. 7 * For conditions of distribution and use, see the accompanying README file. 8 * 9 * This file contains the coefficient buffer controller for compression. 10 * This controller is the top level of the JPEG compressor proper. 11 * The coefficient buffer lies between forward-DCT and entropy encoding steps. 12 */ 13 14#define JPEG_INTERNALS 15#include "jinclude.h" 16#include "jpeglib.h" 17 18 19/* We use a full-image coefficient buffer when doing Huffman optimization, 20 * and also for writing multiple-scan JPEG files. In all cases, the DCT 21 * step is run during the first pass, and subsequent passes need only read 22 * the buffered coefficients. 23 */ 24#ifdef ENTROPY_OPT_SUPPORTED 25#define FULL_COEF_BUFFER_SUPPORTED 26#else 27#ifdef C_MULTISCAN_FILES_SUPPORTED 28#define FULL_COEF_BUFFER_SUPPORTED 29#endif 30#endif 31 32 33/* Private buffer controller object */ 34 35typedef struct { 36 struct jpeg_c_coef_controller pub; /* public fields */ 37 38 JDIMENSION iMCU_row_num; /* iMCU row # within image */ 39 JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ 40 int MCU_vert_offset; /* counts MCU rows within iMCU row */ 41 int MCU_rows_per_iMCU_row; /* number of such rows needed */ 42 43 /* For single-pass compression, it's sufficient to buffer just one MCU 44 * (although this may prove a bit slow in practice). We allocate a 45 * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each 46 * MCU constructed and sent. (On 80x86, the workspace is FAR even though 47 * it's not really very big; this is to keep the module interfaces unchanged 48 * when a large coefficient buffer is necessary.) 49 * In multi-pass modes, this array points to the current MCU's blocks 50 * within the virtual arrays. 51 */ 52 JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; 53 54 /* In multi-pass modes, we need a virtual block array for each component. */ 55 jvirt_barray_ptr whole_image[MAX_COMPONENTS]; 56} my_coef_controller; 57 58typedef my_coef_controller * my_coef_ptr; 59 60 61/* Forward declarations */ 62METHODDEF(boolean) compress_data 63 JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); 64#ifdef FULL_COEF_BUFFER_SUPPORTED 65METHODDEF(boolean) compress_first_pass 66 JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); 67METHODDEF(boolean) compress_output 68 JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); 69#endif 70 71 72LOCAL(void) 73start_iMCU_row (j_compress_ptr cinfo) 74/* Reset within-iMCU-row counters for a new row */ 75{ 76 my_coef_ptr coef = (my_coef_ptr) cinfo->coef; 77 78 /* In an interleaved scan, an MCU row is the same as an iMCU row. 79 * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. 80 * But at the bottom of the image, process only what's left. 81 */ 82 if (cinfo->comps_in_scan > 1) { 83 coef->MCU_rows_per_iMCU_row = 1; 84 } else { 85 if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) 86 coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; 87 else 88 coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; 89 } 90 91 coef->mcu_ctr = 0; 92 coef->MCU_vert_offset = 0; 93} 94 95 96/* 97 * Initialize for a processing pass. 98 */ 99 100METHODDEF(void) 101start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) 102{ 103 my_coef_ptr coef = (my_coef_ptr) cinfo->coef; 104 105 coef->iMCU_row_num = 0; 106 start_iMCU_row(cinfo); 107 108 switch (pass_mode) { 109 case JBUF_PASS_THRU: 110 if (coef->whole_image[0] != NULL) 111 ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); 112 coef->pub.compress_data = compress_data; 113 break; 114#ifdef FULL_COEF_BUFFER_SUPPORTED 115 case JBUF_SAVE_AND_PASS: 116 if (coef->whole_image[0] == NULL) 117 ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); 118 coef->pub.compress_data = compress_first_pass; 119 break; 120 case JBUF_CRANK_DEST: 121 if (coef->whole_image[0] == NULL) 122 ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); 123 coef->pub.compress_data = compress_output; 124 break; 125#endif 126 default: 127 ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); 128 break; 129 } 130} 131 132 133/* 134 * Process some data in the single-pass case. 135 * We process the equivalent of one fully interleaved MCU row ("iMCU" row) 136 * per call, ie, v_samp_factor block rows for each component in the image. 137 * Returns TRUE if the iMCU row is completed, FALSE if suspended. 138 * 139 * NB: input_buf contains a plane for each component in image, 140 * which we index according to the component's SOF position. 141 */ 142 143METHODDEF(boolean) 144compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) 145{ 146 my_coef_ptr coef = (my_coef_ptr) cinfo->coef; 147 JDIMENSION MCU_col_num; /* index of current MCU within row */ 148 JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; 149 JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; 150 int blkn, bi, ci, yindex, yoffset, blockcnt; 151 JDIMENSION ypos, xpos; 152 jpeg_component_info *compptr; 153 154 /* Loop to write as much as one whole iMCU row */ 155 for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; 156 yoffset++) { 157 for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; 158 MCU_col_num++) { 159 /* Determine where data comes from in input_buf and do the DCT thing. 160 * Each call on forward_DCT processes a horizontal row of DCT blocks 161 * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks 162 * sequentially. Dummy blocks at the right or bottom edge are filled in 163 * specially. The data in them does not matter for image reconstruction, 164 * so we fill them with values that will encode to the smallest amount of 165 * data, viz: all zeroes in the AC entries, DC entries equal to previous 166 * block's DC value. (Thanks to Thomas Kinsman for this idea.) 167 */ 168 blkn = 0; 169 for (ci = 0; ci < cinfo->comps_in_scan; ci++) { 170 compptr = cinfo->cur_comp_info[ci]; 171 blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width 172 : compptr->last_col_width; 173 xpos = MCU_col_num * compptr->MCU_sample_width; 174 ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ 175 for (yindex = 0; yindex < compptr->MCU_height; yindex++) { 176 if (coef->iMCU_row_num < last_iMCU_row || 177 yoffset+yindex < compptr->last_row_height) { 178 (*cinfo->fdct->forward_DCT) (cinfo, compptr, 179 input_buf[compptr->component_index], 180 coef->MCU_buffer[blkn], 181 ypos, xpos, (JDIMENSION) blockcnt); 182 if (blockcnt < compptr->MCU_width) { 183 /* Create some dummy blocks at the right edge of the image. */ 184 jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], 185 (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); 186 for (bi = blockcnt; bi < compptr->MCU_width; bi++) { 187 coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; 188 } 189 } 190 } else { 191 /* Create a row of dummy blocks at the bottom of the image. */ 192 jzero_far((void FAR *) coef->MCU_buffer[blkn], 193 compptr->MCU_width * SIZEOF(JBLOCK)); 194 for (bi = 0; bi < compptr->MCU_width; bi++) { 195 coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; 196 } 197 } 198 blkn += compptr->MCU_width; 199 ypos += DCTSIZE; 200 } 201 } 202 /* Try to write the MCU. In event of a suspension failure, we will 203 * re-DCT the MCU on restart (a bit inefficient, could be fixed...) 204 */ 205 if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { 206 /* Suspension forced; update state counters and exit */ 207 coef->MCU_vert_offset = yoffset; 208 coef->mcu_ctr = MCU_col_num; 209 return FALSE; 210 } 211 } 212 /* Completed an MCU row, but perhaps not an iMCU row */ 213 coef->mcu_ctr = 0; 214 } 215 /* Completed the iMCU row, advance counters for next one */ 216 coef->iMCU_row_num++; 217 start_iMCU_row(cinfo); 218 return TRUE; 219} 220 221 222#ifdef FULL_COEF_BUFFER_SUPPORTED 223 224/* 225 * Process some data in the first pass of a multi-pass case. 226 * We process the equivalent of one fully interleaved MCU row ("iMCU" row) 227 * per call, ie, v_samp_factor block rows for each component in the image. 228 * This amount of data is read from the source buffer, DCT'd and quantized, 229 * and saved into the virtual arrays. We also generate suitable dummy blocks 230 * as needed at the right and lower edges. (The dummy blocks are constructed 231 * in the virtual arrays, which have been padded appropriately.) This makes 232 * it possible for subsequent passes not to worry about real vs. dummy blocks. 233 * 234 * We must also emit the data to the entropy encoder. This is conveniently 235 * done by calling compress_output() after we've loaded the current strip 236 * of the virtual arrays. 237 * 238 * NB: input_buf contains a plane for each component in image. All 239 * components are DCT'd and loaded into the virtual arrays in this pass. 240 * However, it may be that only a subset of the components are emitted to 241 * the entropy encoder during this first pass; be careful about looking 242 * at the scan-dependent variables (MCU dimensions, etc). 243 */ 244 245METHODDEF(boolean) 246compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) 247{ 248 my_coef_ptr coef = (my_coef_ptr) cinfo->coef; 249 JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; 250 JDIMENSION blocks_across, MCUs_across, MCUindex; 251 int bi, ci, h_samp_factor, block_row, block_rows, ndummy; 252 JCOEF lastDC; 253 jpeg_component_info *compptr; 254 JBLOCKARRAY buffer; 255 JBLOCKROW thisblockrow, lastblockrow; 256 257 for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; 258 ci++, compptr++) { 259 /* Align the virtual buffer for this component. */ 260 buffer = (*cinfo->mem->access_virt_barray) 261 ((j_common_ptr) cinfo, coef->whole_image[ci], 262 coef->iMCU_row_num * compptr->v_samp_factor, 263 (JDIMENSION) compptr->v_samp_factor, TRUE); 264 /* Count non-dummy DCT block rows in this iMCU row. */ 265 if (coef->iMCU_row_num < last_iMCU_row) 266 block_rows = compptr->v_samp_factor; 267 else { 268 /* NB: can't use last_row_height here, since may not be set! */ 269 block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); 270 if (block_rows == 0) block_rows = compptr->v_samp_factor; 271 } 272 blocks_across = compptr->width_in_blocks; 273 h_samp_factor = compptr->h_samp_factor; 274 /* Count number of dummy blocks to be added at the right margin. */ 275 ndummy = (int) (blocks_across % h_samp_factor); 276 if (ndummy > 0) 277 ndummy = h_samp_factor - ndummy; 278 /* Perform DCT for all non-dummy blocks in this iMCU row. Each call 279 * on forward_DCT processes a complete horizontal row of DCT blocks. 280 */ 281 for (block_row = 0; block_row < block_rows; block_row++) { 282 thisblockrow = buffer[block_row]; 283 (*cinfo->fdct->forward_DCT) (cinfo, compptr, 284 input_buf[ci], thisblockrow, 285 (JDIMENSION) (block_row * DCTSIZE), 286 (JDIMENSION) 0, blocks_across); 287 if (ndummy > 0) { 288 /* Create dummy blocks at the right edge of the image. */ 289 thisblockrow += blocks_across; /* => first dummy block */ 290 jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); 291 lastDC = thisblockrow[-1][0]; 292 for (bi = 0; bi < ndummy; bi++) { 293 thisblockrow[bi][0] = lastDC; 294 } 295 } 296 } 297 /* If at end of image, create dummy block rows as needed. 298 * The tricky part here is that within each MCU, we want the DC values 299 * of the dummy blocks to match the last real block's DC value. 300 * This squeezes a few more bytes out of the resulting file... 301 */ 302 if (coef->iMCU_row_num == last_iMCU_row) { 303 blocks_across += ndummy; /* include lower right corner */ 304 MCUs_across = blocks_across / h_samp_factor; 305 for (block_row = block_rows; block_row < compptr->v_samp_factor; 306 block_row++) { 307 thisblockrow = buffer[block_row]; 308 lastblockrow = buffer[block_row-1]; 309 jzero_far((void FAR *) thisblockrow, 310 (size_t) (blocks_across * SIZEOF(JBLOCK))); 311 for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { 312 lastDC = lastblockrow[h_samp_factor-1][0]; 313 for (bi = 0; bi < h_samp_factor; bi++) { 314 thisblockrow[bi][0] = lastDC; 315 } 316 thisblockrow += h_samp_factor; /* advance to next MCU in row */ 317 lastblockrow += h_samp_factor; 318 } 319 } 320 } 321 } 322 /* NB: compress_output will increment iMCU_row_num if successful. 323 * A suspension return will result in redoing all the work above next time. 324 */ 325 326 /* Emit data to the entropy encoder, sharing code with subsequent passes */ 327 return compress_output(cinfo, input_buf); 328} 329 330 331/* 332 * Process some data in subsequent passes of a multi-pass case. 333 * We process the equivalent of one fully interleaved MCU row ("iMCU" row) 334 * per call, ie, v_samp_factor block rows for each component in the scan. 335 * The data is obtained from the virtual arrays and fed to the entropy coder. 336 * Returns TRUE if the iMCU row is completed, FALSE if suspended. 337 * 338 * NB: input_buf is ignored; it is likely to be a NULL pointer. 339 */ 340 341METHODDEF(boolean) 342compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) 343{ 344 my_coef_ptr coef = (my_coef_ptr) cinfo->coef; 345 JDIMENSION MCU_col_num; /* index of current MCU within row */ 346 int blkn, ci, xindex, yindex, yoffset; 347 JDIMENSION start_col; 348 JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; 349 JBLOCKROW buffer_ptr; 350 jpeg_component_info *compptr; 351 352 /* Align the virtual buffers for the components used in this scan. 353 * NB: during first pass, this is safe only because the buffers will 354 * already be aligned properly, so jmemmgr.c won't need to do any I/O. 355 */ 356 for (ci = 0; ci < cinfo->comps_in_scan; ci++) { 357 compptr = cinfo->cur_comp_info[ci]; 358 buffer[ci] = (*cinfo->mem->access_virt_barray) 359 ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], 360 coef->iMCU_row_num * compptr->v_samp_factor, 361 (JDIMENSION) compptr->v_samp_factor, FALSE); 362 } 363 364 /* Loop to process one whole iMCU row */ 365 for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; 366 yoffset++) { 367 for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; 368 MCU_col_num++) { 369 /* Construct list of pointers to DCT blocks belonging to this MCU */ 370 blkn = 0; /* index of current DCT block within MCU */ 371 for (ci = 0; ci < cinfo->comps_in_scan; ci++) { 372 compptr = cinfo->cur_comp_info[ci]; 373 start_col = MCU_col_num * compptr->MCU_width; 374 for (yindex = 0; yindex < compptr->MCU_height; yindex++) { 375 buffer_ptr = buffer[ci][yindex+yoffset] + start_col; 376 for (xindex = 0; xindex < compptr->MCU_width; xindex++) { 377 coef->MCU_buffer[blkn++] = buffer_ptr++; 378 } 379 } 380 } 381 /* Try to write the MCU. */ 382 if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { 383 /* Suspension forced; update state counters and exit */ 384 coef->MCU_vert_offset = yoffset; 385 coef->mcu_ctr = MCU_col_num; 386 return FALSE; 387 } 388 } 389 /* Completed an MCU row, but perhaps not an iMCU row */ 390 coef->mcu_ctr = 0; 391 } 392 /* Completed the iMCU row, advance counters for next one */ 393 coef->iMCU_row_num++; 394 start_iMCU_row(cinfo); 395 return TRUE; 396} 397 398#endif /* FULL_COEF_BUFFER_SUPPORTED */ 399 400 401/* 402 * Initialize coefficient buffer controller. 403 */ 404 405GLOBAL(void) 406jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) 407{ 408 my_coef_ptr coef; 409 410 coef = (my_coef_ptr) 411 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, 412 SIZEOF(my_coef_controller)); 413 cinfo->coef = (struct jpeg_c_coef_controller *) coef; 414 coef->pub.start_pass = start_pass_coef; 415 416 /* Create the coefficient buffer. */ 417 if (need_full_buffer) { 418#ifdef FULL_COEF_BUFFER_SUPPORTED 419 /* Allocate a full-image virtual array for each component, */ 420 /* padded to a multiple of samp_factor DCT blocks in each direction. */ 421 int ci; 422 jpeg_component_info *compptr; 423 424 for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; 425 ci++, compptr++) { 426 coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) 427 ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, 428 (JDIMENSION) jround_up((long) compptr->width_in_blocks, 429 (long) compptr->h_samp_factor), 430 (JDIMENSION) jround_up((long) compptr->height_in_blocks, 431 (long) compptr->v_samp_factor), 432 (JDIMENSION) compptr->v_samp_factor); 433 } 434#else 435 ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); 436#endif 437 } else { 438 /* We only need a single-MCU buffer. */ 439 JBLOCKROW buffer; 440 int i; 441 442 buffer = (JBLOCKROW) 443 (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, 444 C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); 445 for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { 446 coef->MCU_buffer[i] = buffer + i; 447 } 448 coef->whole_image[0] = NULL; /* flag for no virtual arrays */ 449 } 450} 451 452#endif //_FX_JPEG_TURBO_ 453