Makefile.in revision d0332953cda33fb4f8e24ebff9c49159b69c43d6
1# Makefile.in generated by automake 1.10.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17VPATH = @srcdir@ 18pkgdatadir = $(datadir)/@PACKAGE@ 19pkglibdir = $(libdir)/@PACKAGE@ 20pkgincludedir = $(includedir)/@PACKAGE@ 21am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 22install_sh_DATA = $(install_sh) -c -m 644 23install_sh_PROGRAM = $(install_sh) -c 24install_sh_SCRIPT = $(install_sh) -c 25INSTALL_HEADER = $(INSTALL_DATA) 26transform = $(program_transform_name) 27NORMAL_INSTALL = : 28PRE_INSTALL = : 29POST_INSTALL = : 30NORMAL_UNINSTALL = : 31PRE_UNINSTALL = : 32POST_UNINSTALL = : 33build_triplet = @build@ 34host_triplet = @host@ 35target_triplet = @target@ 36subdir = . 37DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ 38 $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 39 $(srcdir)/protobuf-lite.pc.in $(srcdir)/protobuf.pc.in \ 40 $(top_srcdir)/configure config.guess config.sub depcomp \ 41 install-sh ltmain.sh missing 42ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 43am__aclocal_m4_deps = $(top_srcdir)/m4/ac_system_extensions.m4 \ 44 $(top_srcdir)/m4/acx_check_suncc.m4 \ 45 $(top_srcdir)/m4/acx_pthread.m4 $(top_srcdir)/m4/libtool.m4 \ 46 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 47 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 48 $(top_srcdir)/m4/stl_hash.m4 $(top_srcdir)/configure.ac 49am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 50 $(ACLOCAL_M4) 51am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 52 configure.lineno config.status.lineno 53mkinstalldirs = $(install_sh) -d 54CONFIG_HEADER = config.h 55CONFIG_CLEAN_FILES = protobuf.pc protobuf-lite.pc 56SOURCES = 57DIST_SOURCES = 58RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 59 html-recursive info-recursive install-data-recursive \ 60 install-dvi-recursive install-exec-recursive \ 61 install-html-recursive install-info-recursive \ 62 install-pdf-recursive install-ps-recursive install-recursive \ 63 installcheck-recursive installdirs-recursive pdf-recursive \ 64 ps-recursive uninstall-recursive 65am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 66am__vpath_adj = case $$p in \ 67 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 68 *) f=$$p;; \ 69 esac; 70am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; 71am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 72pkgconfigDATA_INSTALL = $(INSTALL_DATA) 73DATA = $(pkgconfig_DATA) 74RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 75 distclean-recursive maintainer-clean-recursive 76ETAGS = etags 77CTAGS = ctags 78DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 79distdir = $(PACKAGE)-$(VERSION) 80top_distdir = $(distdir) 81am__remove_distdir = \ 82 { test ! -d $(distdir) \ 83 || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ 84 && rm -fr $(distdir); }; } 85DIST_ARCHIVES = $(distdir).tar.gz 86GZIP_ENV = --best 87distuninstallcheck_listfiles = find . -type f -print 88distcleancheck_listfiles = find . -type f -print 89ACLOCAL = @ACLOCAL@ 90AMTAR = @AMTAR@ 91AR = @AR@ 92AUTOCONF = @AUTOCONF@ 93AUTOHEADER = @AUTOHEADER@ 94AUTOMAKE = @AUTOMAKE@ 95AWK = @AWK@ 96CC = @CC@ 97CCDEPMODE = @CCDEPMODE@ 98CFLAGS = @CFLAGS@ 99CPPFLAGS = @CPPFLAGS@ 100CXX = @CXX@ 101CXXCPP = @CXXCPP@ 102CXXDEPMODE = @CXXDEPMODE@ 103CXXFLAGS = @CXXFLAGS@ 104CYGPATH_W = @CYGPATH_W@ 105DEFS = @DEFS@ 106DEPDIR = @DEPDIR@ 107DSYMUTIL = @DSYMUTIL@ 108DUMPBIN = @DUMPBIN@ 109ECHO_C = @ECHO_C@ 110ECHO_N = @ECHO_N@ 111ECHO_T = @ECHO_T@ 112EGREP = @EGREP@ 113EXEEXT = @EXEEXT@ 114FGREP = @FGREP@ 115GREP = @GREP@ 116INSTALL = @INSTALL@ 117INSTALL_DATA = @INSTALL_DATA@ 118INSTALL_PROGRAM = @INSTALL_PROGRAM@ 119INSTALL_SCRIPT = @INSTALL_SCRIPT@ 120INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 121ISAINFO = @ISAINFO@ 122LD = @LD@ 123LDFLAGS = @LDFLAGS@ 124LIBOBJS = @LIBOBJS@ 125LIBS = @LIBS@ 126LIBTOOL = @LIBTOOL@ 127LIPO = @LIPO@ 128LN_S = @LN_S@ 129LTLIBOBJS = @LTLIBOBJS@ 130MAKEINFO = @MAKEINFO@ 131MKDIR_P = @MKDIR_P@ 132NM = @NM@ 133NMEDIT = @NMEDIT@ 134OBJEXT = @OBJEXT@ 135OTOOL = @OTOOL@ 136OTOOL64 = @OTOOL64@ 137PACKAGE = @PACKAGE@ 138PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 139PACKAGE_NAME = @PACKAGE_NAME@ 140PACKAGE_STRING = @PACKAGE_STRING@ 141PACKAGE_TARNAME = @PACKAGE_TARNAME@ 142PACKAGE_VERSION = @PACKAGE_VERSION@ 143PATH_SEPARATOR = @PATH_SEPARATOR@ 144POW_LIB = @POW_LIB@ 145PROTOBUF_OPT_FLAG = @PROTOBUF_OPT_FLAG@ 146PROTOC = @PROTOC@ 147PTHREAD_CC = @PTHREAD_CC@ 148PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ 149PTHREAD_LIBS = @PTHREAD_LIBS@ 150RANLIB = @RANLIB@ 151SED = @SED@ 152SET_MAKE = @SET_MAKE@ 153SHELL = @SHELL@ 154STRIP = @STRIP@ 155VERSION = @VERSION@ 156abs_builddir = @abs_builddir@ 157abs_srcdir = @abs_srcdir@ 158abs_top_builddir = @abs_top_builddir@ 159abs_top_srcdir = @abs_top_srcdir@ 160ac_ct_CC = @ac_ct_CC@ 161ac_ct_CXX = @ac_ct_CXX@ 162ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 163acx_pthread_config = @acx_pthread_config@ 164am__include = @am__include@ 165am__leading_dot = @am__leading_dot@ 166am__quote = @am__quote@ 167am__tar = @am__tar@ 168am__untar = @am__untar@ 169bindir = @bindir@ 170build = @build@ 171build_alias = @build_alias@ 172build_cpu = @build_cpu@ 173build_os = @build_os@ 174build_vendor = @build_vendor@ 175builddir = @builddir@ 176datadir = @datadir@ 177datarootdir = @datarootdir@ 178docdir = @docdir@ 179dvidir = @dvidir@ 180exec_prefix = @exec_prefix@ 181host = @host@ 182host_alias = @host_alias@ 183host_cpu = @host_cpu@ 184host_os = @host_os@ 185host_vendor = @host_vendor@ 186htmldir = @htmldir@ 187includedir = @includedir@ 188infodir = @infodir@ 189install_sh = @install_sh@ 190libdir = @libdir@ 191libexecdir = @libexecdir@ 192localedir = @localedir@ 193localstatedir = @localstatedir@ 194lt_ECHO = @lt_ECHO@ 195mandir = @mandir@ 196mkdir_p = @mkdir_p@ 197oldincludedir = @oldincludedir@ 198pdfdir = @pdfdir@ 199prefix = @prefix@ 200program_transform_name = @program_transform_name@ 201psdir = @psdir@ 202sbindir = @sbindir@ 203sharedstatedir = @sharedstatedir@ 204srcdir = @srcdir@ 205subdirs = @subdirs@ 206sysconfdir = @sysconfdir@ 207target = @target@ 208target_alias = @target_alias@ 209target_cpu = @target_cpu@ 210target_os = @target_os@ 211target_vendor = @target_vendor@ 212top_builddir = @top_builddir@ 213top_srcdir = @top_srcdir@ 214ACLOCAL_AMFLAGS = -I m4 215AUTOMAKE_OPTIONS = foreign 216 217# Build . before src so that our all-local and clean-local hooks kicks in at 218# the right time. 219SUBDIRS = . src 220 221# Always include gtest in distributions. 222DIST_SUBDIRS = $(subdirs) src 223pkgconfigdir = $(libdir)/pkgconfig 224pkgconfig_DATA = protobuf.pc protobuf-lite.pc 225EXTRA_DIST = \ 226 autogen.sh \ 227 generate_descriptor_proto.sh \ 228 README.txt \ 229 INSTALL.txt \ 230 COPYING.txt \ 231 CONTRIBUTORS.txt \ 232 CHANGES.txt \ 233 editors/README.txt \ 234 editors/proto.vim \ 235 editors/protobuf-mode.el \ 236 vsprojects/config.h \ 237 vsprojects/extract_includes.bat \ 238 vsprojects/libprotobuf.vcproj \ 239 vsprojects/libprotobuf-lite.vcproj \ 240 vsprojects/libprotoc.vcproj \ 241 vsprojects/protobuf.sln \ 242 vsprojects/protoc.vcproj \ 243 vsprojects/readme.txt \ 244 vsprojects/test_plugin.vcproj \ 245 vsprojects/tests.vcproj \ 246 vsprojects/lite-test.vcproj \ 247 vsprojects/convert2008to2005.sh \ 248 examples/README.txt \ 249 examples/Makefile \ 250 examples/addressbook.proto \ 251 examples/add_person.cc \ 252 examples/list_people.cc \ 253 examples/AddPerson.java \ 254 examples/ListPeople.java \ 255 examples/add_person.py \ 256 examples/list_people.py \ 257 java/src/main/java/com/google/protobuf/AbstractMessage.java \ 258 java/src/main/java/com/google/protobuf/AbstractMessageLite.java \ 259 java/src/main/java/com/google/protobuf/BlockingRpcChannel.java \ 260 java/src/main/java/com/google/protobuf/BlockingService.java \ 261 java/src/main/java/com/google/protobuf/ByteString.java \ 262 java/src/main/java/com/google/protobuf/CodedInputStream.java \ 263 java/src/main/java/com/google/protobuf/CodedOutputStream.java \ 264 java/src/main/java/com/google/protobuf/Descriptors.java \ 265 java/src/main/java/com/google/protobuf/DynamicMessage.java \ 266 java/src/main/java/com/google/protobuf/ExtensionRegistry.java \ 267 java/src/main/java/com/google/protobuf/ExtensionRegistryLite.java \ 268 java/src/main/java/com/google/protobuf/FieldSet.java \ 269 java/src/main/java/com/google/protobuf/GeneratedMessage.java \ 270 java/src/main/java/com/google/protobuf/GeneratedMessageLite.java \ 271 java/src/main/java/com/google/protobuf/Internal.java \ 272 java/src/main/java/com/google/protobuf/InvalidProtocolBufferException.java \ 273 java/src/main/java/com/google/protobuf/Message.java \ 274 java/src/main/java/com/google/protobuf/MessageLite.java \ 275 java/src/main/java/com/google/protobuf/ProtocolMessageEnum.java \ 276 java/src/main/java/com/google/protobuf/RpcCallback.java \ 277 java/src/main/java/com/google/protobuf/RpcChannel.java \ 278 java/src/main/java/com/google/protobuf/RpcController.java \ 279 java/src/main/java/com/google/protobuf/RpcUtil.java \ 280 java/src/main/java/com/google/protobuf/Service.java \ 281 java/src/main/java/com/google/protobuf/ServiceException.java \ 282 java/src/main/java/com/google/protobuf/TextFormat.java \ 283 java/src/main/java/com/google/protobuf/UninitializedMessageException.java \ 284 java/src/main/java/com/google/protobuf/UnknownFieldSet.java \ 285 java/src/main/java/com/google/protobuf/WireFormat.java \ 286 java/src/test/java/com/google/protobuf/AbstractMessageTest.java \ 287 java/src/test/java/com/google/protobuf/CodedInputStreamTest.java \ 288 java/src/test/java/com/google/protobuf/CodedOutputStreamTest.java \ 289 java/src/test/java/com/google/protobuf/DescriptorsTest.java \ 290 java/src/test/java/com/google/protobuf/DynamicMessageTest.java \ 291 java/src/test/java/com/google/protobuf/GeneratedMessageTest.java \ 292 java/src/test/java/com/google/protobuf/LiteTest.java \ 293 java/src/test/java/com/google/protobuf/MessageTest.java \ 294 java/src/test/java/com/google/protobuf/ServiceTest.java \ 295 java/src/test/java/com/google/protobuf/TestUtil.java \ 296 java/src/test/java/com/google/protobuf/TextFormatTest.java \ 297 java/src/test/java/com/google/protobuf/UnknownFieldSetTest.java \ 298 java/src/test/java/com/google/protobuf/WireFormatTest.java \ 299 java/src/test/java/com/google/protobuf/multiple_files_test.proto \ 300 java/pom.xml \ 301 java/README.txt \ 302 python/google/protobuf/internal/generator_test.py \ 303 python/google/protobuf/internal/containers.py \ 304 python/google/protobuf/internal/decoder.py \ 305 python/google/protobuf/internal/descriptor_test.py \ 306 python/google/protobuf/internal/encoder.py \ 307 python/google/protobuf/internal/message_listener.py \ 308 python/google/protobuf/internal/message_test.py \ 309 python/google/protobuf/internal/more_extensions.proto \ 310 python/google/protobuf/internal/more_messages.proto \ 311 python/google/protobuf/internal/reflection_test.py \ 312 python/google/protobuf/internal/service_reflection_test.py \ 313 python/google/protobuf/internal/test_util.py \ 314 python/google/protobuf/internal/text_format_test.py \ 315 python/google/protobuf/internal/type_checkers.py \ 316 python/google/protobuf/internal/wire_format.py \ 317 python/google/protobuf/internal/wire_format_test.py \ 318 python/google/protobuf/internal/__init__.py \ 319 python/google/protobuf/descriptor.py \ 320 python/google/protobuf/message.py \ 321 python/google/protobuf/reflection.py \ 322 python/google/protobuf/service.py \ 323 python/google/protobuf/service_reflection.py \ 324 python/google/protobuf/text_format.py \ 325 python/google/protobuf/__init__.py \ 326 python/google/__init__.py \ 327 python/ez_setup.py \ 328 python/setup.py \ 329 python/mox.py \ 330 python/stubout.py \ 331 python/README.txt 332 333 334# Deletes all the files generated by autogen.sh. 335MAINTAINERCLEANFILES = \ 336 aclocal.m4 \ 337 config.guess \ 338 config.sub \ 339 configure \ 340 depcomp \ 341 install-sh \ 342 ltmain.sh \ 343 Makefile.in \ 344 missing \ 345 mkinstalldirs \ 346 config.h.in \ 347 stamp.h.in \ 348 m4/ltsugar.m4 \ 349 m4/libtool.m4 \ 350 m4/ltversion.m4 \ 351 m4/lt~obsolete.m4 \ 352 m4/ltoptions.m4 353 354all: config.h 355 $(MAKE) $(AM_MAKEFLAGS) all-recursive 356 357.SUFFIXES: 358am--refresh: 359 @: 360$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 361 @for dep in $?; do \ 362 case '$(am__configure_deps)' in \ 363 *$$dep*) \ 364 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ 365 cd $(srcdir) && $(AUTOMAKE) --foreign \ 366 && exit 0; \ 367 exit 1;; \ 368 esac; \ 369 done; \ 370 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 371 cd $(top_srcdir) && \ 372 $(AUTOMAKE) --foreign Makefile 373.PRECIOUS: Makefile 374Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 375 @case '$?' in \ 376 *config.status*) \ 377 echo ' $(SHELL) ./config.status'; \ 378 $(SHELL) ./config.status;; \ 379 *) \ 380 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 381 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 382 esac; 383 384$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 385 $(SHELL) ./config.status --recheck 386 387$(top_srcdir)/configure: $(am__configure_deps) 388 cd $(srcdir) && $(AUTOCONF) 389$(ACLOCAL_M4): $(am__aclocal_m4_deps) 390 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 391 392config.h: stamp-h1 393 @if test ! -f $@; then \ 394 rm -f stamp-h1; \ 395 $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ 396 else :; fi 397 398stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 399 @rm -f stamp-h1 400 cd $(top_builddir) && $(SHELL) ./config.status config.h 401$(srcdir)/config.h.in: $(am__configure_deps) 402 cd $(top_srcdir) && $(AUTOHEADER) 403 rm -f stamp-h1 404 touch $@ 405 406distclean-hdr: 407 -rm -f config.h stamp-h1 408protobuf.pc: $(top_builddir)/config.status $(srcdir)/protobuf.pc.in 409 cd $(top_builddir) && $(SHELL) ./config.status $@ 410protobuf-lite.pc: $(top_builddir)/config.status $(srcdir)/protobuf-lite.pc.in 411 cd $(top_builddir) && $(SHELL) ./config.status $@ 412 413mostlyclean-libtool: 414 -rm -f *.lo 415 416clean-libtool: 417 -rm -rf .libs _libs 418 419distclean-libtool: 420 -rm -f libtool 421install-pkgconfigDATA: $(pkgconfig_DATA) 422 @$(NORMAL_INSTALL) 423 test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" 424 @list='$(pkgconfig_DATA)'; for p in $$list; do \ 425 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 426 f=$(am__strip_dir) \ 427 echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ 428 $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ 429 done 430 431uninstall-pkgconfigDATA: 432 @$(NORMAL_UNINSTALL) 433 @list='$(pkgconfig_DATA)'; for p in $$list; do \ 434 f=$(am__strip_dir) \ 435 echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ 436 rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ 437 done 438 439# This directory's subdirectories are mostly independent; you can cd 440# into them and run `make' without going through this Makefile. 441# To change the values of `make' variables: instead of editing Makefiles, 442# (1) if the variable is set in `config.status', edit `config.status' 443# (which will cause the Makefiles to be regenerated when you run `make'); 444# (2) otherwise, pass the desired values on the `make' command line. 445$(RECURSIVE_TARGETS): 446 @failcom='exit 1'; \ 447 for f in x $$MAKEFLAGS; do \ 448 case $$f in \ 449 *=* | --[!k]*);; \ 450 *k*) failcom='fail=yes';; \ 451 esac; \ 452 done; \ 453 dot_seen=no; \ 454 target=`echo $@ | sed s/-recursive//`; \ 455 list='$(SUBDIRS)'; for subdir in $$list; do \ 456 echo "Making $$target in $$subdir"; \ 457 if test "$$subdir" = "."; then \ 458 dot_seen=yes; \ 459 local_target="$$target-am"; \ 460 else \ 461 local_target="$$target"; \ 462 fi; \ 463 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 464 || eval $$failcom; \ 465 done; \ 466 if test "$$dot_seen" = "no"; then \ 467 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 468 fi; test -z "$$fail" 469 470$(RECURSIVE_CLEAN_TARGETS): 471 @failcom='exit 1'; \ 472 for f in x $$MAKEFLAGS; do \ 473 case $$f in \ 474 *=* | --[!k]*);; \ 475 *k*) failcom='fail=yes';; \ 476 esac; \ 477 done; \ 478 dot_seen=no; \ 479 case "$@" in \ 480 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 481 *) list='$(SUBDIRS)' ;; \ 482 esac; \ 483 rev=''; for subdir in $$list; do \ 484 if test "$$subdir" = "."; then :; else \ 485 rev="$$subdir $$rev"; \ 486 fi; \ 487 done; \ 488 rev="$$rev ."; \ 489 target=`echo $@ | sed s/-recursive//`; \ 490 for subdir in $$rev; do \ 491 echo "Making $$target in $$subdir"; \ 492 if test "$$subdir" = "."; then \ 493 local_target="$$target-am"; \ 494 else \ 495 local_target="$$target"; \ 496 fi; \ 497 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 498 || eval $$failcom; \ 499 done && test -z "$$fail" 500tags-recursive: 501 list='$(SUBDIRS)'; for subdir in $$list; do \ 502 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 503 done 504ctags-recursive: 505 list='$(SUBDIRS)'; for subdir in $$list; do \ 506 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 507 done 508 509ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 510 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 511 unique=`for i in $$list; do \ 512 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 513 done | \ 514 $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ 515 END { if (nonempty) { for (i in files) print i; }; }'`; \ 516 mkid -fID $$unique 517tags: TAGS 518 519TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 520 $(TAGS_FILES) $(LISP) 521 tags=; \ 522 here=`pwd`; \ 523 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 524 include_option=--etags-include; \ 525 empty_fix=.; \ 526 else \ 527 include_option=--include; \ 528 empty_fix=; \ 529 fi; \ 530 list='$(SUBDIRS)'; for subdir in $$list; do \ 531 if test "$$subdir" = .; then :; else \ 532 test ! -f $$subdir/TAGS || \ 533 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ 534 fi; \ 535 done; \ 536 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 537 unique=`for i in $$list; do \ 538 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 539 done | \ 540 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 541 END { if (nonempty) { for (i in files) print i; }; }'`; \ 542 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ 543 test -n "$$unique" || unique=$$empty_fix; \ 544 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 545 $$tags $$unique; \ 546 fi 547ctags: CTAGS 548CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 549 $(TAGS_FILES) $(LISP) 550 tags=; \ 551 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 552 unique=`for i in $$list; do \ 553 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 554 done | \ 555 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 556 END { if (nonempty) { for (i in files) print i; }; }'`; \ 557 test -z "$(CTAGS_ARGS)$$tags$$unique" \ 558 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 559 $$tags $$unique 560 561GTAGS: 562 here=`$(am__cd) $(top_builddir) && pwd` \ 563 && cd $(top_srcdir) \ 564 && gtags -i $(GTAGS_ARGS) $$here 565 566distclean-tags: 567 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 568 569distdir: $(DISTFILES) 570 $(am__remove_distdir) 571 test -d $(distdir) || mkdir $(distdir) 572 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 573 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 574 list='$(DISTFILES)'; \ 575 dist_files=`for file in $$list; do echo $$file; done | \ 576 sed -e "s|^$$srcdirstrip/||;t" \ 577 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 578 case $$dist_files in \ 579 */*) $(MKDIR_P) `echo "$$dist_files" | \ 580 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 581 sort -u` ;; \ 582 esac; \ 583 for file in $$dist_files; do \ 584 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 585 if test -d $$d/$$file; then \ 586 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 587 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 588 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ 589 fi; \ 590 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ 591 else \ 592 test -f $(distdir)/$$file \ 593 || cp -p $$d/$$file $(distdir)/$$file \ 594 || exit 1; \ 595 fi; \ 596 done 597 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 598 if test "$$subdir" = .; then :; else \ 599 test -d "$(distdir)/$$subdir" \ 600 || $(MKDIR_P) "$(distdir)/$$subdir" \ 601 || exit 1; \ 602 distdir=`$(am__cd) $(distdir) && pwd`; \ 603 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ 604 (cd $$subdir && \ 605 $(MAKE) $(AM_MAKEFLAGS) \ 606 top_distdir="$$top_distdir" \ 607 distdir="$$distdir/$$subdir" \ 608 am__remove_distdir=: \ 609 am__skip_length_check=: \ 610 distdir) \ 611 || exit 1; \ 612 fi; \ 613 done 614 -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ 615 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 616 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 617 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 618 || chmod -R a+r $(distdir) 619dist-gzip: distdir 620 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 621 $(am__remove_distdir) 622 623dist-bzip2: distdir 624 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 625 $(am__remove_distdir) 626 627dist-lzma: distdir 628 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma 629 $(am__remove_distdir) 630 631dist-tarZ: distdir 632 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 633 $(am__remove_distdir) 634 635dist-shar: distdir 636 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 637 $(am__remove_distdir) 638 639dist-zip: distdir 640 -rm -f $(distdir).zip 641 zip -rq $(distdir).zip $(distdir) 642 $(am__remove_distdir) 643 644dist dist-all: distdir 645 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 646 $(am__remove_distdir) 647 648# This target untars the dist file and tries a VPATH configuration. Then 649# it guarantees that the distribution is self-contained by making another 650# tarfile. 651distcheck: dist 652 case '$(DIST_ARCHIVES)' in \ 653 *.tar.gz*) \ 654 GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ 655 *.tar.bz2*) \ 656 bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ 657 *.tar.lzma*) \ 658 unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ 659 *.tar.Z*) \ 660 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 661 *.shar.gz*) \ 662 GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ 663 *.zip*) \ 664 unzip $(distdir).zip ;;\ 665 esac 666 chmod -R a-w $(distdir); chmod a+w $(distdir) 667 mkdir $(distdir)/_build 668 mkdir $(distdir)/_inst 669 chmod a-w $(distdir) 670 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 671 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 672 && cd $(distdir)/_build \ 673 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 674 $(DISTCHECK_CONFIGURE_FLAGS) \ 675 && $(MAKE) $(AM_MAKEFLAGS) \ 676 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 677 && $(MAKE) $(AM_MAKEFLAGS) check \ 678 && $(MAKE) $(AM_MAKEFLAGS) install \ 679 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 680 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 681 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 682 distuninstallcheck \ 683 && chmod -R a-w "$$dc_install_base" \ 684 && ({ \ 685 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 686 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 687 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 688 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 689 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 690 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 691 && rm -rf "$$dc_destdir" \ 692 && $(MAKE) $(AM_MAKEFLAGS) dist \ 693 && rm -rf $(DIST_ARCHIVES) \ 694 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck 695 $(am__remove_distdir) 696 @(echo "$(distdir) archives ready for distribution: "; \ 697 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 698 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 699distuninstallcheck: 700 @cd $(distuninstallcheck_dir) \ 701 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ 702 || { echo "ERROR: files left after uninstall:" ; \ 703 if test -n "$(DESTDIR)"; then \ 704 echo " (check DESTDIR support)"; \ 705 fi ; \ 706 $(distuninstallcheck_listfiles) ; \ 707 exit 1; } >&2 708distcleancheck: distclean 709 @if test '$(srcdir)' = . ; then \ 710 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 711 exit 1 ; \ 712 fi 713 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 714 || { echo "ERROR: files left in build directory after distclean:" ; \ 715 $(distcleancheck_listfiles) ; \ 716 exit 1; } >&2 717check-am: all-am 718 $(MAKE) $(AM_MAKEFLAGS) check-local 719check: check-recursive 720all-am: Makefile $(DATA) config.h 721installdirs: installdirs-recursive 722installdirs-am: 723 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 724 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 725 done 726install: install-recursive 727install-exec: install-exec-recursive 728install-data: install-data-recursive 729uninstall: uninstall-recursive 730 731install-am: all-am 732 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 733 734installcheck: installcheck-recursive 735install-strip: 736 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 737 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 738 `test -z '$(STRIP)' || \ 739 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 740mostlyclean-generic: 741 742clean-generic: 743 744distclean-generic: 745 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 746 747maintainer-clean-generic: 748 @echo "This command is intended for maintainers to use" 749 @echo "it deletes files that may require special tools to rebuild." 750 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 751clean: clean-recursive 752 753clean-am: clean-generic clean-libtool clean-local mostlyclean-am 754 755distclean: distclean-recursive 756 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 757 -rm -f Makefile 758distclean-am: clean-am distclean-generic distclean-hdr \ 759 distclean-libtool distclean-tags 760 761dvi: dvi-recursive 762 763dvi-am: 764 765html: html-recursive 766 767info: info-recursive 768 769info-am: 770 771install-data-am: install-pkgconfigDATA 772 773install-dvi: install-dvi-recursive 774 775install-exec-am: 776 777install-html: install-html-recursive 778 779install-info: install-info-recursive 780 781install-man: 782 783install-pdf: install-pdf-recursive 784 785install-ps: install-ps-recursive 786 787installcheck-am: 788 789maintainer-clean: maintainer-clean-recursive 790 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 791 -rm -rf $(top_srcdir)/autom4te.cache 792 -rm -f Makefile 793maintainer-clean-am: distclean-am maintainer-clean-generic 794 795mostlyclean: mostlyclean-recursive 796 797mostlyclean-am: mostlyclean-generic mostlyclean-libtool 798 799pdf: pdf-recursive 800 801pdf-am: 802 803ps: ps-recursive 804 805ps-am: 806 807uninstall-am: uninstall-pkgconfigDATA 808 809.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ 810 install-strip 811 812.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 813 all all-am am--refresh check check-am check-local clean \ 814 clean-generic clean-libtool clean-local ctags ctags-recursive \ 815 dist dist-all dist-bzip2 dist-gzip dist-lzma dist-shar \ 816 dist-tarZ dist-zip distcheck distclean distclean-generic \ 817 distclean-hdr distclean-libtool distclean-tags distcleancheck \ 818 distdir distuninstallcheck dvi dvi-am html html-am info \ 819 info-am install install-am install-data install-data-am \ 820 install-dvi install-dvi-am install-exec install-exec-am \ 821 install-html install-html-am install-info install-info-am \ 822 install-man install-pdf install-pdf-am install-pkgconfigDATA \ 823 install-ps install-ps-am install-strip installcheck \ 824 installcheck-am installdirs installdirs-am maintainer-clean \ 825 maintainer-clean-generic mostlyclean mostlyclean-generic \ 826 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 827 uninstall uninstall-am uninstall-pkgconfigDATA 828 829 830# Build gtest before we build protobuf tests. We don't add gtest to SUBDIRS 831# because then "make check" would also build and run all of gtest's own tests, 832# which takes a lot of time and is generally not useful to us. Also, we don't 833# want "make install" to recurse into gtest since we don't want to overwrite 834# the installed version of gtest if there is one. 835check-local: 836 @echo "Making lib/libgtest.a lib/libgtest_main.a in gtest" 837 @cd gtest && $(MAKE) $(AM_MAKEFLAGS) lib/libgtest.la lib/libgtest_main.la 838 839# We would like to clean gtest when "make clean" is invoked. But we have to 840# be careful because clean-local is also invoked during "make distclean", but 841# "make distclean" already recurses into gtest because it's listed among the 842# DIST_SUBDIRS. distclean will delete gtest/Makefile, so if we then try to 843# cd to the directory again and "make clean" it will fail. So, check that the 844# Makefile exists before recursing. 845clean-local: 846 @if test -e gtest/Makefile; then \ 847 echo "Making clean in gtest"; \ 848 cd gtest && $(MAKE) $(AM_MAKEFLAGS) clean; \ 849 fi 850# Tell versions [3.59,3.63) of GNU make to not export all variables. 851# Otherwise a system limit (for SysV at least) may be exceeded. 852.NOEXPORT: 853