1/*
2 * jctrans.c
3 *
4 * Copyright (C) 1995-1998, Thomas G. Lane.
5 * This file is part of the Independent JPEG Group's software.
6 * For conditions of distribution and use, see the accompanying README file.
7 *
8 * This file contains library routines for transcoding compression,
9 * that is, writing raw DCT coefficient arrays to an output JPEG file.
10 * The routines in jcapimin.c will also be needed by a transcoder.
11 */
12
13#define JPEG_INTERNALS
14#include "jinclude.h"
15#include "jpeglib.h"
16
17
18/* Forward declarations */
19LOCAL(void) transencode_master_selection
20	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
21LOCAL(void) transencode_coef_controller
22	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
23
24
25/*
26 * Compression initialization for writing raw-coefficient data.
27 * Before calling this, all parameters and a data destination must be set up.
28 * Call jpeg_finish_compress() to actually write the data.
29 *
30 * The number of passed virtual arrays must match cinfo->num_components.
31 * Note that the virtual arrays need not be filled or even realized at
32 * the time write_coefficients is called; indeed, if the virtual arrays
33 * were requested from this compression object's memory manager, they
34 * typically will be realized during this routine and filled afterwards.
35 */
36
37GLOBAL(void)
38jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)
39{
40  if (cinfo->global_state != CSTATE_START)
41    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
42  /* Mark all tables to be written */
43  jpeg_suppress_tables(cinfo, FALSE);
44  /* (Re)initialize error mgr and destination modules */
45  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
46  (*cinfo->dest->init_destination) (cinfo);
47  /* Perform master selection of active modules */
48  transencode_master_selection(cinfo, coef_arrays);
49  /* Wait for jpeg_finish_compress() call */
50  cinfo->next_scanline = 0;	/* so jpeg_write_marker works */
51  cinfo->global_state = CSTATE_WRCOEFS;
52}
53
54
55/*
56 * Initialize the compression object with default parameters,
57 * then copy from the source object all parameters needed for lossless
58 * transcoding.  Parameters that can be varied without loss (such as
59 * scan script and Huffman optimization) are left in their default states.
60 */
61
62GLOBAL(void)
63jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
64			       j_compress_ptr dstinfo)
65{
66  JQUANT_TBL ** qtblptr;
67  jpeg_component_info *incomp, *outcomp;
68  JQUANT_TBL *c_quant, *slot_quant;
69  int tblno, ci, coefi;
70
71  /* Safety check to ensure start_compress not called yet. */
72  if (dstinfo->global_state != CSTATE_START)
73    ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state);
74  /* Copy fundamental image dimensions */
75  dstinfo->image_width = srcinfo->image_width;
76  dstinfo->image_height = srcinfo->image_height;
77  dstinfo->input_components = srcinfo->num_components;
78  dstinfo->in_color_space = srcinfo->jpeg_color_space;
79  /* Initialize all parameters to default values */
80  jpeg_set_defaults(dstinfo);
81  /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
82   * Fix it to get the right header markers for the image colorspace.
83   */
84  jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
85  dstinfo->data_precision = srcinfo->data_precision;
86  dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
87  /* Copy the source's quantization tables. */
88  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
89    if (srcinfo->quant_tbl_ptrs[tblno] != NULL) {
90      qtblptr = & dstinfo->quant_tbl_ptrs[tblno];
91      if (*qtblptr == NULL)
92	*qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo);
93      MEMCOPY((*qtblptr)->quantval,
94	      srcinfo->quant_tbl_ptrs[tblno]->quantval,
95	      SIZEOF((*qtblptr)->quantval));
96      (*qtblptr)->sent_table = FALSE;
97    }
98  }
99  /* Copy the source's per-component info.
100   * Note we assume jpeg_set_defaults has allocated the dest comp_info array.
101   */
102  dstinfo->num_components = srcinfo->num_components;
103  if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS)
104    ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components,
105	     MAX_COMPONENTS);
106  for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info;
107       ci < dstinfo->num_components; ci++, incomp++, outcomp++) {
108    outcomp->component_id = incomp->component_id;
109    outcomp->h_samp_factor = incomp->h_samp_factor;
110    outcomp->v_samp_factor = incomp->v_samp_factor;
111    outcomp->quant_tbl_no = incomp->quant_tbl_no;
112    /* Make sure saved quantization table for component matches the qtable
113     * slot.  If not, the input file re-used this qtable slot.
114     * IJG encoder currently cannot duplicate this.
115     */
116    tblno = outcomp->quant_tbl_no;
117    if (tblno < 0 || tblno >= NUM_QUANT_TBLS ||
118	srcinfo->quant_tbl_ptrs[tblno] == NULL)
119      ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno);
120    slot_quant = srcinfo->quant_tbl_ptrs[tblno];
121    c_quant = incomp->quant_table;
122    if (c_quant != NULL) {
123      for (coefi = 0; coefi < DCTSIZE2; coefi++) {
124	if (c_quant->quantval[coefi] != slot_quant->quantval[coefi])
125	  ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
126      }
127    }
128    /* Note: we do not copy the source's Huffman table assignments;
129     * instead we rely on jpeg_set_colorspace to have made a suitable choice.
130     */
131  }
132  /* Also copy JFIF version and resolution information, if available.
133   * Strictly speaking this isn't "critical" info, but it's nearly
134   * always appropriate to copy it if available.  In particular,
135   * if the application chooses to copy JFIF 1.02 extension markers from
136   * the source file, we need to copy the version to make sure we don't
137   * emit a file that has 1.02 extensions but a claimed version of 1.01.
138   * We will *not*, however, copy version info from mislabeled "2.01" files.
139   */
140  if (srcinfo->saw_JFIF_marker) {
141    if (srcinfo->JFIF_major_version == 1) {
142      dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
143      dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
144    }
145    dstinfo->density_unit = srcinfo->density_unit;
146    dstinfo->X_density = srcinfo->X_density;
147    dstinfo->Y_density = srcinfo->Y_density;
148  }
149}
150
151
152/*
153 * Master selection of compression modules for transcoding.
154 * This substitutes for jcinit.c's initialization of the full compressor.
155 */
156
157LOCAL(void)
158transencode_master_selection (j_compress_ptr cinfo,
159			      jvirt_barray_ptr * coef_arrays)
160{
161  /* Although we don't actually use input_components for transcoding,
162   * jcmaster.c's initial_setup will complain if input_components is 0.
163   */
164  cinfo->input_components = 1;
165  /* Initialize master control (includes parameter checking/processing) */
166  jinit_c_master_control(cinfo, TRUE /* transcode only */);
167
168  /* Entropy encoding: either Huffman or arithmetic coding. */
169  if (cinfo->arith_code) {
170    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
171  } else {
172    if (cinfo->progressive_mode) {
173#ifdef C_PROGRESSIVE_SUPPORTED
174      jinit_phuff_encoder(cinfo);
175#else
176      ERREXIT(cinfo, JERR_NOT_COMPILED);
177#endif
178    } else
179      jinit_huff_encoder(cinfo);
180  }
181
182  /* We need a special coefficient buffer controller. */
183  transencode_coef_controller(cinfo, coef_arrays);
184
185  jinit_marker_writer(cinfo);
186
187  /* We can now tell the memory manager to allocate virtual arrays. */
188  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
189
190  /* Write the datastream header (SOI, JFIF) immediately.
191   * Frame and scan headers are postponed till later.
192   * This lets application insert special markers after the SOI.
193   */
194  (*cinfo->marker->write_file_header) (cinfo);
195}
196
197
198/*
199 * The rest of this file is a special implementation of the coefficient
200 * buffer controller.  This is similar to jccoefct.c, but it handles only
201 * output from presupplied virtual arrays.  Furthermore, we generate any
202 * dummy padding blocks on-the-fly rather than expecting them to be present
203 * in the arrays.
204 */
205
206/* Private buffer controller object */
207
208typedef struct {
209  struct jpeg_c_coef_controller pub; /* public fields */
210
211  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
212  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
213  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
214  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
215
216  /* Virtual block array for each component. */
217  jvirt_barray_ptr * whole_image;
218
219  /* Workspace for constructing dummy blocks at right/bottom edges. */
220  JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU];
221} my_coef_controller;
222
223typedef my_coef_controller * my_coef_ptr;
224
225
226LOCAL(void)
227start_iMCU_row (j_compress_ptr cinfo)
228/* Reset within-iMCU-row counters for a new row */
229{
230  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
231
232  /* In an interleaved scan, an MCU row is the same as an iMCU row.
233   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
234   * But at the bottom of the image, process only what's left.
235   */
236  if (cinfo->comps_in_scan > 1) {
237    coef->MCU_rows_per_iMCU_row = 1;
238  } else {
239    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
240      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
241    else
242      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
243  }
244
245  coef->mcu_ctr = 0;
246  coef->MCU_vert_offset = 0;
247}
248
249
250/*
251 * Initialize for a processing pass.
252 */
253
254METHODDEF(void)
255start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
256{
257  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
258
259  if (pass_mode != JBUF_CRANK_DEST)
260    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
261
262  coef->iMCU_row_num = 0;
263  start_iMCU_row(cinfo);
264}
265
266
267/*
268 * Process some data.
269 * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
270 * per call, ie, v_samp_factor block rows for each component in the scan.
271 * The data is obtained from the virtual arrays and fed to the entropy coder.
272 * Returns TRUE if the iMCU row is completed, FALSE if suspended.
273 *
274 * NB: input_buf is ignored; it is likely to be a NULL pointer.
275 */
276
277METHODDEF(boolean)
278compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
279{
280  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
281  JDIMENSION MCU_col_num;	/* index of current MCU within row */
282  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
283  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
284  int blkn, ci, xindex, yindex, yoffset, blockcnt;
285  JDIMENSION start_col;
286  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
287  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
288  JBLOCKROW buffer_ptr;
289  jpeg_component_info *compptr;
290
291  /* Align the virtual buffers for the components used in this scan. */
292  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
293    compptr = cinfo->cur_comp_info[ci];
294    buffer[ci] = (*cinfo->mem->access_virt_barray)
295      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
296       coef->iMCU_row_num * compptr->v_samp_factor,
297       (JDIMENSION) compptr->v_samp_factor, FALSE);
298  }
299
300  /* Loop to process one whole iMCU row */
301  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
302       yoffset++) {
303    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
304	 MCU_col_num++) {
305      /* Construct list of pointers to DCT blocks belonging to this MCU */
306      blkn = 0;			/* index of current DCT block within MCU */
307      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
308	compptr = cinfo->cur_comp_info[ci];
309	start_col = MCU_col_num * compptr->MCU_width;
310	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
311						: compptr->last_col_width;
312	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
313	  if (coef->iMCU_row_num < last_iMCU_row ||
314	      yindex+yoffset < compptr->last_row_height) {
315	    /* Fill in pointers to real blocks in this row */
316	    buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
317	    for (xindex = 0; xindex < blockcnt; xindex++)
318	      MCU_buffer[blkn++] = buffer_ptr++;
319	  } else {
320	    /* At bottom of image, need a whole row of dummy blocks */
321	    xindex = 0;
322	  }
323	  /* Fill in any dummy blocks needed in this row.
324	   * Dummy blocks are filled in the same way as in jccoefct.c:
325	   * all zeroes in the AC entries, DC entries equal to previous
326	   * block's DC value.  The init routine has already zeroed the
327	   * AC entries, so we need only set the DC entries correctly.
328	   */
329	  for (; xindex < compptr->MCU_width; xindex++) {
330	    MCU_buffer[blkn] = coef->dummy_buffer[blkn];
331	    MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0];
332	    blkn++;
333	  }
334	}
335      }
336      /* Try to write the MCU. */
337      if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) {
338	/* Suspension forced; update state counters and exit */
339	coef->MCU_vert_offset = yoffset;
340	coef->mcu_ctr = MCU_col_num;
341	return FALSE;
342      }
343    }
344    /* Completed an MCU row, but perhaps not an iMCU row */
345    coef->mcu_ctr = 0;
346  }
347  /* Completed the iMCU row, advance counters for next one */
348  coef->iMCU_row_num++;
349  start_iMCU_row(cinfo);
350  return TRUE;
351}
352
353
354/*
355 * Initialize coefficient buffer controller.
356 *
357 * Each passed coefficient array must be the right size for that
358 * coefficient: width_in_blocks wide and height_in_blocks high,
359 * with unitheight at least v_samp_factor.
360 */
361
362LOCAL(void)
363transencode_coef_controller (j_compress_ptr cinfo,
364			     jvirt_barray_ptr * coef_arrays)
365{
366  my_coef_ptr coef;
367  JBLOCKROW buffer;
368  int i;
369
370  coef = (my_coef_ptr)
371    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
372				SIZEOF(my_coef_controller));
373  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
374  coef->pub.start_pass = start_pass_coef;
375  coef->pub.compress_data = compress_output;
376
377  /* Save pointer to virtual arrays */
378  coef->whole_image = coef_arrays;
379
380  /* Allocate and pre-zero space for dummy DCT blocks. */
381  buffer = (JBLOCKROW)
382    (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
383				C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
384  jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
385  for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
386    coef->dummy_buffer[i] = buffer + i;
387  }
388}
389