wpa_ctrl.h revision b7b4d0ec07161a6d76c40ba7ef1306e82fbb7e15
1/* 2 * wpa_supplicant/hostapd control interface library 3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9#ifndef WPA_CTRL_H 10#define WPA_CTRL_H 11 12#ifdef __cplusplus 13extern "C" { 14#endif 15 16/* wpa_supplicant control interface - fixed message prefixes */ 17 18/** Interactive request for identity/password/pin */ 19#define WPA_CTRL_REQ "CTRL-REQ-" 20 21/** Response to identity/password/pin request */ 22#define WPA_CTRL_RSP "CTRL-RSP-" 23 24/* Event messages with fixed prefix */ 25/** Authentication completed successfully and data connection enabled */ 26#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED " 27/** Disconnected, data connection is not available */ 28#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED " 29/** Association rejected during connection attempt */ 30#define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT " 31/** wpa_supplicant is exiting */ 32#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING " 33/** Password change was completed successfully */ 34#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED " 35/** EAP-Request/Notification received */ 36#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION " 37/** EAP authentication started (EAP-Request/Identity received) */ 38#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED " 39/** EAP method proposed by the server */ 40#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD " 41/** EAP method selected */ 42#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD " 43/** EAP peer certificate from TLS */ 44#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT " 45/** EAP TLS certificate chain validation error */ 46#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR " 47/** EAP status */ 48#define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS " 49/** EAP authentication completed successfully */ 50#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS " 51/** EAP authentication failed (EAP-Failure received) */ 52#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE " 53/** Network block temporarily disabled (e.g., due to authentication failure) */ 54#define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED " 55/** Temporarily disabled network block re-enabled */ 56#define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED " 57/** New scan results available */ 58#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS " 59/** wpa_supplicant state change */ 60#define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE " 61/** A new BSS entry was added (followed by BSS entry id and BSSID) */ 62#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED " 63/** A BSS entry was removed (followed by BSS entry id and BSSID) */ 64#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED " 65#ifdef ANDROID_P2P 66/** Notify the Userspace about the freq conflict */ 67#define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT " 68#endif 69 70/** RSN IBSS 4-way handshakes completed with specified peer */ 71#define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED " 72 73/** WPS overlap detected in PBC mode */ 74#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED " 75/** Available WPS AP with active PBC found in scan results */ 76#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC " 77/** Available WPS AP with our address as authorized in scan results */ 78#define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH " 79/** Available WPS AP with recently selected PIN registrar found in scan results 80 */ 81#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN " 82/** Available WPS AP found in scan results */ 83#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE " 84/** A new credential received */ 85#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED " 86/** M2D received */ 87#define WPS_EVENT_M2D "WPS-M2D " 88/** WPS registration failed after M2/M2D */ 89#define WPS_EVENT_FAIL "WPS-FAIL " 90/** WPS registration completed successfully */ 91#define WPS_EVENT_SUCCESS "WPS-SUCCESS " 92/** WPS enrollment attempt timed out and was terminated */ 93#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT " 94/* PBC mode was activated */ 95#define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE " 96/* PBC mode was disabled */ 97#define WPS_EVENT_DISABLE "WPS-PBC-DISABLE " 98 99#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN " 100 101#define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK " 102 103/* WPS ER events */ 104#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD " 105#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE " 106#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD " 107#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE " 108#define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS " 109#define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG " 110 111/** P2P device found */ 112#define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND " 113 114/** P2P device lost */ 115#define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST " 116 117/** A P2P device requested GO negotiation, but we were not ready to start the 118 * negotiation */ 119#define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST " 120#define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS " 121#define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE " 122#define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS " 123#define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE " 124#define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED " 125#define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED " 126#define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE " 127#define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE " 128/* parameters: <peer address> <PIN> */ 129#define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN " 130/* parameters: <peer address> */ 131#define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN " 132/* parameters: <peer address> */ 133#define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ " 134/* parameters: <peer address> */ 135#define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP " 136/* parameters: <peer address> <status> */ 137#define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE" 138/* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */ 139#define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ " 140/* parameters: <src addr> <update indicator> <TLVs> */ 141#define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP " 142#define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED " 143#define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT " 144#define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED " 145 146/* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */ 147#define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT " 148 149#define INTERWORKING_AP "INTERWORKING-AP " 150#define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH " 151 152#define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO " 153 154/* hostapd control interface - fixed message prefixes */ 155#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED " 156#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS " 157#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS " 158#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED " 159#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED " 160#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED " 161#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED " 162#define AP_STA_CONNECTED "AP-STA-CONNECTED " 163#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED " 164 165#define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA " 166#define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA " 167 168/* BSS command information masks */ 169 170#define WPA_BSS_MASK_ALL 0xFFFDFFFF 171#define WPA_BSS_MASK_ID BIT(0) 172#define WPA_BSS_MASK_BSSID BIT(1) 173#define WPA_BSS_MASK_FREQ BIT(2) 174#define WPA_BSS_MASK_BEACON_INT BIT(3) 175#define WPA_BSS_MASK_CAPABILITIES BIT(4) 176#define WPA_BSS_MASK_QUAL BIT(5) 177#define WPA_BSS_MASK_NOISE BIT(6) 178#define WPA_BSS_MASK_LEVEL BIT(7) 179#define WPA_BSS_MASK_TSF BIT(8) 180#define WPA_BSS_MASK_AGE BIT(9) 181#define WPA_BSS_MASK_IE BIT(10) 182#define WPA_BSS_MASK_FLAGS BIT(11) 183#define WPA_BSS_MASK_SSID BIT(12) 184#define WPA_BSS_MASK_WPS_SCAN BIT(13) 185#define WPA_BSS_MASK_P2P_SCAN BIT(14) 186#define WPA_BSS_MASK_INTERNETW BIT(15) 187#define WPA_BSS_MASK_WIFI_DISPLAY BIT(16) 188#define WPA_BSS_MASK_DELIM BIT(17) 189 190 191/* wpa_supplicant/hostapd control interface access */ 192 193/** 194 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd 195 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. 196 * Returns: Pointer to abstract control interface data or %NULL on failure 197 * 198 * This function is used to open a control interface to wpa_supplicant/hostapd. 199 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path 200 * is configured in wpa_supplicant/hostapd and other programs using the control 201 * interface need to use matching path configuration. 202 */ 203struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path); 204 205 206/** 207 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd 208 * @ctrl: Control interface data from wpa_ctrl_open() 209 * 210 * This function is used to close a control interface. 211 */ 212void wpa_ctrl_close(struct wpa_ctrl *ctrl); 213 214 215/** 216 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd 217 * @ctrl: Control interface data from wpa_ctrl_open() 218 * @cmd: Command; usually, ASCII text, e.g., "PING" 219 * @cmd_len: Length of the cmd in bytes 220 * @reply: Buffer for the response 221 * @reply_len: Reply buffer length 222 * @msg_cb: Callback function for unsolicited messages or %NULL if not used 223 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout 224 * 225 * This function is used to send commands to wpa_supplicant/hostapd. Received 226 * response will be written to reply and reply_len is set to the actual length 227 * of the reply. This function will block for up to two seconds while waiting 228 * for the reply. If unsolicited messages are received, the blocking time may 229 * be longer. 230 * 231 * msg_cb can be used to register a callback function that will be called for 232 * unsolicited messages received while waiting for the command response. These 233 * messages may be received if wpa_ctrl_request() is called at the same time as 234 * wpa_supplicant/hostapd is sending such a message. This can happen only if 235 * the program has used wpa_ctrl_attach() to register itself as a monitor for 236 * event messages. Alternatively to msg_cb, programs can register two control 237 * interface connections and use one of them for commands and the other one for 238 * receiving event messages, in other words, call wpa_ctrl_attach() only for 239 * the control interface connection that will be used for event messages. 240 */ 241int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len, 242 char *reply, size_t *reply_len, 243 void (*msg_cb)(char *msg, size_t len)); 244 245 246/** 247 * wpa_ctrl_attach - Register as an event monitor for the control interface 248 * @ctrl: Control interface data from wpa_ctrl_open() 249 * Returns: 0 on success, -1 on failure, -2 on timeout 250 * 251 * This function registers the control interface connection as a monitor for 252 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the 253 * control interface connection starts receiving event messages that can be 254 * read with wpa_ctrl_recv(). 255 */ 256int wpa_ctrl_attach(struct wpa_ctrl *ctrl); 257 258 259/** 260 * wpa_ctrl_detach - Unregister event monitor from the control interface 261 * @ctrl: Control interface data from wpa_ctrl_open() 262 * Returns: 0 on success, -1 on failure, -2 on timeout 263 * 264 * This function unregisters the control interface connection as a monitor for 265 * wpa_supplicant/hostapd events, i.e., cancels the registration done with 266 * wpa_ctrl_attach(). 267 */ 268int wpa_ctrl_detach(struct wpa_ctrl *ctrl); 269 270 271/** 272 * wpa_ctrl_recv - Receive a pending control interface message 273 * @ctrl: Control interface data from wpa_ctrl_open() 274 * @reply: Buffer for the message data 275 * @reply_len: Length of the reply buffer 276 * Returns: 0 on success, -1 on failure 277 * 278 * This function will receive a pending control interface message. This 279 * function will block if no messages are available. The received response will 280 * be written to reply and reply_len is set to the actual length of the reply. 281 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach() 282 * must have been used to register the control interface as an event monitor. 283 */ 284int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len); 285 286 287/** 288 * wpa_ctrl_pending - Check whether there are pending event messages 289 * @ctrl: Control interface data from wpa_ctrl_open() 290 * Returns: 1 if there are pending messages, 0 if no, or -1 on error 291 * 292 * This function will check whether there are any pending control interface 293 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is 294 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to 295 * register the control interface as an event monitor. 296 */ 297int wpa_ctrl_pending(struct wpa_ctrl *ctrl); 298 299 300/** 301 * wpa_ctrl_get_fd - Get file descriptor used by the control interface 302 * @ctrl: Control interface data from wpa_ctrl_open() 303 * Returns: File descriptor used for the connection 304 * 305 * This function can be used to get the file descriptor that is used for the 306 * control interface connection. The returned value can be used, e.g., with 307 * select() while waiting for multiple events. 308 * 309 * The returned file descriptor must not be used directly for sending or 310 * receiving packets; instead, the library functions wpa_ctrl_request() and 311 * wpa_ctrl_recv() must be used for this. 312 */ 313int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl); 314 315char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl); 316 317#ifdef ANDROID 318/** 319 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that 320 * may be left over from clients that were previously connected to 321 * wpa_supplicant. This keeps these files from being orphaned in the 322 * event of crashes that prevented them from being removed as part 323 * of the normal orderly shutdown. 324 */ 325void wpa_ctrl_cleanup(void); 326#endif /* ANDROID */ 327 328#ifdef CONFIG_CTRL_IFACE_UDP 329/* Port range for multiple wpa_supplicant instances and multiple VIFs */ 330#define WPA_CTRL_IFACE_PORT 9877 331#define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */ 332#define WPA_GLOBAL_CTRL_IFACE_PORT 9878 333#define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */ 334#endif /* CONFIG_CTRL_IFACE_UDP */ 335 336 337#ifdef __cplusplus 338} 339#endif 340 341#endif /* WPA_CTRL_H */ 342