AudioPolicyManager.h revision 5dbe47139713292bf45bbf4f1a7af0835a5ff368
1/*
2 * Copyright (C) 2009 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 *      http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17
18#include <stdint.h>
19#include <sys/types.h>
20#include <cutils/config_utils.h>
21#include <cutils/misc.h>
22#include <utils/Timers.h>
23#include <utils/Errors.h>
24#include <utils/KeyedVector.h>
25#include <utils/SortedVector.h>
26#include "AudioPolicyInterface.h"
27
28
29namespace android {
30
31// ----------------------------------------------------------------------------
32
33// Attenuation applied to STRATEGY_SONIFICATION streams when a headset is connected: 6dB
34#define SONIFICATION_HEADSET_VOLUME_FACTOR 0.5
35// Min volume for STRATEGY_SONIFICATION streams when limited by music volume: -36dB
36#define SONIFICATION_HEADSET_VOLUME_MIN  0.016
37// Time in milliseconds during which we consider that music is still active after a music
38// track was stopped - see computeVolume()
39#define SONIFICATION_HEADSET_MUSIC_DELAY  5000
40// Time in milliseconds after media stopped playing during which we consider that the
41// sonification should be as unobtrusive as during the time media was playing.
42#define SONIFICATION_RESPECTFUL_AFTER_MUSIC_DELAY 5000
43// Time in milliseconds during witch some streams are muted while the audio path
44// is switched
45#define MUTE_TIME_MS 2000
46
47#define NUM_TEST_OUTPUTS 5
48
49#define NUM_VOL_CURVE_KNEES 2
50
51// Default minimum length allowed for offloading a compressed track
52// Can be overridden by the audio.offload.min.duration.secs property
53#define OFFLOAD_DEFAULT_MIN_DURATION_SECS 60
54
55#define MAX_MIXER_SAMPLING_RATE 48000
56#define MAX_MIXER_CHANNEL_COUNT 8
57
58// ----------------------------------------------------------------------------
59// AudioPolicyManager implements audio policy manager behavior common to all platforms.
60// ----------------------------------------------------------------------------
61
62class AudioPolicyManager: public AudioPolicyInterface
63#ifdef AUDIO_POLICY_TEST
64    , public Thread
65#endif //AUDIO_POLICY_TEST
66{
67
68public:
69                AudioPolicyManager(AudioPolicyClientInterface *clientInterface);
70        virtual ~AudioPolicyManager();
71
72        // AudioPolicyInterface
73        virtual status_t setDeviceConnectionState(audio_devices_t device,
74                                                          audio_policy_dev_state_t state,
75                                                          const char *device_address);
76        virtual audio_policy_dev_state_t getDeviceConnectionState(audio_devices_t device,
77                                                                              const char *device_address);
78        virtual void setPhoneState(audio_mode_t state);
79        virtual void setForceUse(audio_policy_force_use_t usage,
80                                 audio_policy_forced_cfg_t config);
81        virtual audio_policy_forced_cfg_t getForceUse(audio_policy_force_use_t usage);
82        virtual void setSystemProperty(const char* property, const char* value);
83        virtual status_t initCheck();
84        virtual audio_io_handle_t getOutput(audio_stream_type_t stream,
85                                            uint32_t samplingRate,
86                                            audio_format_t format,
87                                            audio_channel_mask_t channelMask,
88                                            audio_output_flags_t flags,
89                                            const audio_offload_info_t *offloadInfo);
90        virtual audio_io_handle_t getOutputForAttr(const audio_attributes_t *attr,
91                                            uint32_t samplingRate,
92                                            audio_format_t format,
93                                            audio_channel_mask_t channelMask,
94                                            audio_output_flags_t flags,
95                                            const audio_offload_info_t *offloadInfo);
96        virtual status_t startOutput(audio_io_handle_t output,
97                                     audio_stream_type_t stream,
98                                     int session = 0);
99        virtual status_t stopOutput(audio_io_handle_t output,
100                                    audio_stream_type_t stream,
101                                    int session = 0);
102        virtual void releaseOutput(audio_io_handle_t output);
103        virtual audio_io_handle_t getInput(audio_source_t inputSource,
104                                            uint32_t samplingRate,
105                                            audio_format_t format,
106                                            audio_channel_mask_t channelMask,
107                                            audio_session_t session,
108                                            audio_input_flags_t flags);
109
110        // indicates to the audio policy manager that the input starts being used.
111        virtual status_t startInput(audio_io_handle_t input,
112                                    audio_session_t session);
113
114        // indicates to the audio policy manager that the input stops being used.
115        virtual status_t stopInput(audio_io_handle_t input,
116                                   audio_session_t session);
117        virtual void releaseInput(audio_io_handle_t input,
118                                  audio_session_t session);
119        virtual void closeAllInputs();
120        virtual void initStreamVolume(audio_stream_type_t stream,
121                                                    int indexMin,
122                                                    int indexMax);
123        virtual status_t setStreamVolumeIndex(audio_stream_type_t stream,
124                                              int index,
125                                              audio_devices_t device);
126        virtual status_t getStreamVolumeIndex(audio_stream_type_t stream,
127                                              int *index,
128                                              audio_devices_t device);
129
130        // return the strategy corresponding to a given stream type
131        virtual uint32_t getStrategyForStream(audio_stream_type_t stream);
132        // return the strategy corresponding to the given audio attributes
133        virtual uint32_t getStrategyForAttr(const audio_attributes_t *attr);
134
135        // return the enabled output devices for the given stream type
136        virtual audio_devices_t getDevicesForStream(audio_stream_type_t stream);
137
138        virtual audio_io_handle_t getOutputForEffect(const effect_descriptor_t *desc = NULL);
139        virtual status_t registerEffect(const effect_descriptor_t *desc,
140                                        audio_io_handle_t io,
141                                        uint32_t strategy,
142                                        int session,
143                                        int id);
144        virtual status_t unregisterEffect(int id);
145        virtual status_t setEffectEnabled(int id, bool enabled);
146
147        virtual bool isStreamActive(audio_stream_type_t stream, uint32_t inPastMs = 0) const;
148        // return whether a stream is playing remotely, override to change the definition of
149        //   local/remote playback, used for instance by notification manager to not make
150        //   media players lose audio focus when not playing locally
151        virtual bool isStreamActiveRemotely(audio_stream_type_t stream, uint32_t inPastMs = 0) const;
152        virtual bool isSourceActive(audio_source_t source) const;
153
154        virtual status_t dump(int fd);
155
156        virtual bool isOffloadSupported(const audio_offload_info_t& offloadInfo);
157
158        virtual status_t listAudioPorts(audio_port_role_t role,
159                                        audio_port_type_t type,
160                                        unsigned int *num_ports,
161                                        struct audio_port *ports,
162                                        unsigned int *generation);
163        virtual status_t getAudioPort(struct audio_port *port);
164        virtual status_t createAudioPatch(const struct audio_patch *patch,
165                                           audio_patch_handle_t *handle,
166                                           uid_t uid);
167        virtual status_t releaseAudioPatch(audio_patch_handle_t handle,
168                                              uid_t uid);
169        virtual status_t listAudioPatches(unsigned int *num_patches,
170                                          struct audio_patch *patches,
171                                          unsigned int *generation);
172        virtual status_t setAudioPortConfig(const struct audio_port_config *config);
173        virtual void clearAudioPatches(uid_t uid);
174
175        virtual status_t acquireSoundTriggerSession(audio_session_t *session,
176                                               audio_io_handle_t *ioHandle,
177                                               audio_devices_t *device);
178
179        virtual status_t releaseSoundTriggerSession(audio_session_t session);
180
181protected:
182
183        enum routing_strategy {
184            STRATEGY_MEDIA,
185            STRATEGY_PHONE,
186            STRATEGY_SONIFICATION,
187            STRATEGY_SONIFICATION_RESPECTFUL,
188            STRATEGY_DTMF,
189            STRATEGY_ENFORCED_AUDIBLE,
190            NUM_STRATEGIES
191        };
192
193        // 4 points to define the volume attenuation curve, each characterized by the volume
194        // index (from 0 to 100) at which they apply, and the attenuation in dB at that index.
195        // we use 100 steps to avoid rounding errors when computing the volume in volIndexToAmpl()
196
197        enum { VOLMIN = 0, VOLKNEE1 = 1, VOLKNEE2 = 2, VOLMAX = 3, VOLCNT = 4};
198
199        class VolumeCurvePoint
200        {
201        public:
202            int mIndex;
203            float mDBAttenuation;
204        };
205
206        // device categories used for volume curve management.
207        enum device_category {
208            DEVICE_CATEGORY_HEADSET,
209            DEVICE_CATEGORY_SPEAKER,
210            DEVICE_CATEGORY_EARPIECE,
211            DEVICE_CATEGORY_EXT_MEDIA,
212            DEVICE_CATEGORY_CNT
213        };
214
215        class HwModule;
216
217        class AudioGain: public RefBase
218        {
219        public:
220            AudioGain(int index, bool useInChannelMask);
221            virtual ~AudioGain() {}
222
223            void dump(int fd, int spaces, int index) const;
224
225            void getDefaultConfig(struct audio_gain_config *config);
226            status_t checkConfig(const struct audio_gain_config *config);
227            int               mIndex;
228            struct audio_gain mGain;
229            bool              mUseInChannelMask;
230        };
231
232        class AudioPort: public virtual RefBase
233        {
234        public:
235            AudioPort(const String8& name, audio_port_type_t type,
236                      audio_port_role_t role, const sp<HwModule>& module);
237            virtual ~AudioPort() {}
238
239            virtual void toAudioPort(struct audio_port *port) const;
240
241            void importAudioPort(const sp<AudioPort> port);
242            void clearCapabilities();
243
244            void loadSamplingRates(char *name);
245            void loadFormats(char *name);
246            void loadOutChannels(char *name);
247            void loadInChannels(char *name);
248
249            audio_gain_mode_t loadGainMode(char *name);
250            void loadGain(cnode *root, int index);
251            void loadGains(cnode *root);
252
253            // searches for an exact match
254            status_t checkExactSamplingRate(uint32_t samplingRate) const;
255            // searches for a compatible match, and returns the best match via updatedSamplingRate
256            status_t checkCompatibleSamplingRate(uint32_t samplingRate,
257                    uint32_t *updatedSamplingRate) const;
258            // searches for an exact match
259            status_t checkExactChannelMask(audio_channel_mask_t channelMask) const;
260            // searches for a compatible match, currently implemented for input channel masks only
261            status_t checkCompatibleChannelMask(audio_channel_mask_t channelMask) const;
262            status_t checkFormat(audio_format_t format) const;
263            status_t checkGain(const struct audio_gain_config *gainConfig, int index) const;
264
265            uint32_t pickSamplingRate() const;
266            audio_channel_mask_t pickChannelMask() const;
267            audio_format_t pickFormat() const;
268
269            static const audio_format_t sPcmFormatCompareTable[];
270            static int compareFormats(audio_format_t format1, audio_format_t format2);
271
272            void dump(int fd, int spaces) const;
273
274            String8           mName;
275            audio_port_type_t mType;
276            audio_port_role_t mRole;
277            bool              mUseInChannelMask;
278            // by convention, "0' in the first entry in mSamplingRates, mChannelMasks or mFormats
279            // indicates the supported parameters should be read from the output stream
280            // after it is opened for the first time
281            Vector <uint32_t> mSamplingRates; // supported sampling rates
282            Vector <audio_channel_mask_t> mChannelMasks; // supported channel masks
283            Vector <audio_format_t> mFormats; // supported audio formats
284            Vector < sp<AudioGain> > mGains; // gain controllers
285            sp<HwModule> mModule;                 // audio HW module exposing this I/O stream
286            uint32_t mFlags; // attribute flags (e.g primary output,
287                                                // direct output...).
288        };
289
290        class AudioPortConfig: public virtual RefBase
291        {
292        public:
293            AudioPortConfig();
294            virtual ~AudioPortConfig() {}
295
296            status_t applyAudioPortConfig(const struct audio_port_config *config,
297                                          struct audio_port_config *backupConfig = NULL);
298            virtual void toAudioPortConfig(struct audio_port_config *dstConfig,
299                                   const struct audio_port_config *srcConfig = NULL) const = 0;
300            virtual sp<AudioPort> getAudioPort() const = 0;
301            uint32_t mSamplingRate;
302            audio_format_t mFormat;
303            audio_channel_mask_t mChannelMask;
304            struct audio_gain_config mGain;
305        };
306
307
308        class AudioPatch: public RefBase
309        {
310        public:
311            AudioPatch(audio_patch_handle_t handle,
312                       const struct audio_patch *patch, uid_t uid) :
313                           mHandle(handle), mPatch(*patch), mUid(uid), mAfPatchHandle(0) {}
314
315            status_t dump(int fd, int spaces, int index) const;
316
317            audio_patch_handle_t mHandle;
318            struct audio_patch mPatch;
319            uid_t mUid;
320            audio_patch_handle_t mAfPatchHandle;
321        };
322
323        class DeviceDescriptor: public AudioPort, public AudioPortConfig
324        {
325        public:
326            DeviceDescriptor(const String8& name, audio_devices_t type);
327
328            virtual ~DeviceDescriptor() {}
329
330            bool equals(const sp<DeviceDescriptor>& other) const;
331            virtual void toAudioPortConfig(struct audio_port_config *dstConfig,
332                                   const struct audio_port_config *srcConfig = NULL) const;
333            virtual sp<AudioPort> getAudioPort() const { return (AudioPort*) this; }
334
335            virtual void toAudioPort(struct audio_port *port) const;
336
337            status_t dump(int fd, int spaces, int index) const;
338
339            audio_devices_t mDeviceType;
340            String8 mAddress;
341            audio_port_handle_t mId;
342        };
343
344        class DeviceVector : public SortedVector< sp<DeviceDescriptor> >
345        {
346        public:
347            DeviceVector() : SortedVector(), mDeviceTypes(AUDIO_DEVICE_NONE) {}
348
349            ssize_t         add(const sp<DeviceDescriptor>& item);
350            ssize_t         remove(const sp<DeviceDescriptor>& item);
351            ssize_t         indexOf(const sp<DeviceDescriptor>& item) const;
352
353            audio_devices_t types() const { return mDeviceTypes; }
354
355            void loadDevicesFromType(audio_devices_t types);
356            void loadDevicesFromName(char *name, const DeviceVector& declaredDevices);
357
358            sp<DeviceDescriptor> getDevice(audio_devices_t type, String8 address) const;
359            DeviceVector getDevicesFromType(audio_devices_t types) const;
360            sp<DeviceDescriptor> getDeviceFromId(audio_port_handle_t id) const;
361            sp<DeviceDescriptor> getDeviceFromName(const String8& name) const;
362            DeviceVector getDevicesFromTypeAddr(audio_devices_t type, String8 address)
363                    const;
364
365        private:
366            void refreshTypes();
367            audio_devices_t mDeviceTypes;
368        };
369
370        // the IOProfile class describes the capabilities of an output or input stream.
371        // It is currently assumed that all combination of listed parameters are supported.
372        // It is used by the policy manager to determine if an output or input is suitable for
373        // a given use case,  open/close it accordingly and connect/disconnect audio tracks
374        // to/from it.
375        class IOProfile : public AudioPort
376        {
377        public:
378            IOProfile(const String8& name, audio_port_role_t role, const sp<HwModule>& module);
379            virtual ~IOProfile();
380
381            // This method is used for both output and input.
382            // If parameter updatedSamplingRate is non-NULL, it is assigned the actual sample rate.
383            // For input, flags is interpreted as audio_input_flags_t.
384            // TODO: merge audio_output_flags_t and audio_input_flags_t.
385            bool isCompatibleProfile(audio_devices_t device,
386                                     uint32_t samplingRate,
387                                     uint32_t *updatedSamplingRate,
388                                     audio_format_t format,
389                                     audio_channel_mask_t channelMask,
390                                     uint32_t flags) const;
391
392            void dump(int fd);
393            void log();
394
395            DeviceVector  mSupportedDevices; // supported devices
396                                             // (devices this output can be routed to)
397        };
398
399        class HwModule : public RefBase
400        {
401        public:
402                    HwModule(const char *name);
403                    ~HwModule();
404
405            status_t loadOutput(cnode *root);
406            status_t loadInput(cnode *root);
407            status_t loadDevice(cnode *root);
408
409            void dump(int fd);
410
411            const char *const        mName; // base name of the audio HW module (primary, a2dp ...)
412            uint32_t                 mHalVersion; // audio HAL API version
413            audio_module_handle_t    mHandle;
414            Vector < sp<IOProfile> > mOutputProfiles; // output profiles exposed by this module
415            Vector < sp<IOProfile> > mInputProfiles;  // input profiles exposed by this module
416            DeviceVector             mDeclaredDevices; // devices declared in audio_policy.conf
417
418        };
419
420        // default volume curve
421        static const VolumeCurvePoint sDefaultVolumeCurve[AudioPolicyManager::VOLCNT];
422        // default volume curve for media strategy
423        static const VolumeCurvePoint sDefaultMediaVolumeCurve[AudioPolicyManager::VOLCNT];
424        // volume curve for non-media audio on ext media outputs (HDMI, Line, etc)
425        static const VolumeCurvePoint sExtMediaSystemVolumeCurve[AudioPolicyManager::VOLCNT];
426        // volume curve for media strategy on speakers
427        static const VolumeCurvePoint sSpeakerMediaVolumeCurve[AudioPolicyManager::VOLCNT];
428        static const VolumeCurvePoint sSpeakerMediaVolumeCurveDrc[AudioPolicyManager::VOLCNT];
429        // volume curve for sonification strategy on speakers
430        static const VolumeCurvePoint sSpeakerSonificationVolumeCurve[AudioPolicyManager::VOLCNT];
431        static const VolumeCurvePoint sSpeakerSonificationVolumeCurveDrc[AudioPolicyManager::VOLCNT];
432        static const VolumeCurvePoint sDefaultSystemVolumeCurve[AudioPolicyManager::VOLCNT];
433        static const VolumeCurvePoint sDefaultSystemVolumeCurveDrc[AudioPolicyManager::VOLCNT];
434        static const VolumeCurvePoint sHeadsetSystemVolumeCurve[AudioPolicyManager::VOLCNT];
435        static const VolumeCurvePoint sDefaultVoiceVolumeCurve[AudioPolicyManager::VOLCNT];
436        static const VolumeCurvePoint sSpeakerVoiceVolumeCurve[AudioPolicyManager::VOLCNT];
437        // default volume curves per stream and device category. See initializeVolumeCurves()
438        static const VolumeCurvePoint *sVolumeProfiles[AUDIO_STREAM_CNT][DEVICE_CATEGORY_CNT];
439
440        // descriptor for audio outputs. Used to maintain current configuration of each opened audio output
441        // and keep track of the usage of this output by each audio stream type.
442        class AudioOutputDescriptor: public AudioPortConfig
443        {
444        public:
445            AudioOutputDescriptor(const sp<IOProfile>& profile);
446
447            status_t    dump(int fd);
448
449            audio_devices_t device() const;
450            void changeRefCount(audio_stream_type_t stream, int delta);
451
452            bool isDuplicated() const { return (mOutput1 != NULL && mOutput2 != NULL); }
453            audio_devices_t supportedDevices();
454            uint32_t latency();
455            bool sharesHwModuleWith(const sp<AudioOutputDescriptor> outputDesc);
456            bool isActive(uint32_t inPastMs = 0) const;
457            bool isStreamActive(audio_stream_type_t stream,
458                                uint32_t inPastMs = 0,
459                                nsecs_t sysTime = 0) const;
460            bool isStrategyActive(routing_strategy strategy,
461                             uint32_t inPastMs = 0,
462                             nsecs_t sysTime = 0) const;
463
464            virtual void toAudioPortConfig(struct audio_port_config *dstConfig,
465                                   const struct audio_port_config *srcConfig = NULL) const;
466            virtual sp<AudioPort> getAudioPort() const { return mProfile; }
467            void toAudioPort(struct audio_port *port) const;
468
469            audio_port_handle_t mId;
470            audio_io_handle_t mIoHandle;              // output handle
471            uint32_t mLatency;                  //
472            audio_output_flags_t mFlags;   //
473            audio_devices_t mDevice;                   // current device this output is routed to
474            audio_patch_handle_t mPatchHandle;
475            uint32_t mRefCount[AUDIO_STREAM_CNT]; // number of streams of each type using this output
476            nsecs_t mStopTime[AUDIO_STREAM_CNT];
477            sp<AudioOutputDescriptor> mOutput1;    // used by duplicated outputs: first output
478            sp<AudioOutputDescriptor> mOutput2;    // used by duplicated outputs: second output
479            float mCurVolume[AUDIO_STREAM_CNT];   // current stream volume
480            int mMuteCount[AUDIO_STREAM_CNT];     // mute request counter
481            const sp<IOProfile> mProfile;          // I/O profile this output derives from
482            bool mStrategyMutedByDevice[NUM_STRATEGIES]; // strategies muted because of incompatible
483                                                // device selection. See checkDeviceMuteStrategies()
484            uint32_t mDirectOpenCount; // number of clients using this output (direct outputs only)
485        };
486
487        // descriptor for audio inputs. Used to maintain current configuration of each opened audio input
488        // and keep track of the usage of this input.
489        class AudioInputDescriptor: public AudioPortConfig
490        {
491        public:
492            AudioInputDescriptor(const sp<IOProfile>& profile);
493
494            status_t    dump(int fd);
495
496            audio_port_handle_t           mId;
497            audio_io_handle_t             mIoHandle;       // input handle
498            audio_devices_t               mDevice;         // current device this input is routed to
499            audio_patch_handle_t          mPatchHandle;
500            uint32_t                      mRefCount;       // number of AudioRecord clients using
501                                                           // this input
502            uint32_t                      mOpenRefCount;
503            audio_source_t                mInputSource;    // input source selected by application
504                                                           //(mediarecorder.h)
505            const sp<IOProfile>           mProfile;        // I/O profile this output derives from
506            SortedVector<audio_session_t> mSessions;       // audio sessions attached to this input
507            bool                          mIsSoundTrigger; // used by a soundtrigger capture
508
509            virtual void toAudioPortConfig(struct audio_port_config *dstConfig,
510                                   const struct audio_port_config *srcConfig = NULL) const;
511            virtual sp<AudioPort> getAudioPort() const { return mProfile; }
512            void toAudioPort(struct audio_port *port) const;
513        };
514
515        // stream descriptor used for volume control
516        class StreamDescriptor
517        {
518        public:
519            StreamDescriptor();
520
521            int getVolumeIndex(audio_devices_t device);
522            void dump(int fd);
523
524            int mIndexMin;      // min volume index
525            int mIndexMax;      // max volume index
526            KeyedVector<audio_devices_t, int> mIndexCur;   // current volume index per device
527            bool mCanBeMuted;   // true is the stream can be muted
528
529            const VolumeCurvePoint *mVolumeCurve[DEVICE_CATEGORY_CNT];
530        };
531
532        // stream descriptor used for volume control
533        class EffectDescriptor : public RefBase
534        {
535        public:
536
537            status_t dump(int fd);
538
539            int mIo;                // io the effect is attached to
540            routing_strategy mStrategy; // routing strategy the effect is associated to
541            int mSession;               // audio session the effect is on
542            effect_descriptor_t mDesc;  // effect descriptor
543            bool mEnabled;              // enabled state: CPU load being used or not
544        };
545
546        void addOutput(audio_io_handle_t output, sp<AudioOutputDescriptor> outputDesc);
547        void addInput(audio_io_handle_t input, sp<AudioInputDescriptor> inputDesc);
548
549        // return the strategy corresponding to a given stream type
550        static routing_strategy getStrategy(audio_stream_type_t stream);
551
552        // return appropriate device for streams handled by the specified strategy according to current
553        // phone state, connected devices...
554        // if fromCache is true, the device is returned from mDeviceForStrategy[],
555        // otherwise it is determine by current state
556        // (device connected,phone state, force use, a2dp output...)
557        // This allows to:
558        //  1 speed up process when the state is stable (when starting or stopping an output)
559        //  2 access to either current device selection (fromCache == true) or
560        // "future" device selection (fromCache == false) when called from a context
561        //  where conditions are changing (setDeviceConnectionState(), setPhoneState()...) AND
562        //  before updateDevicesAndOutputs() is called.
563        virtual audio_devices_t getDeviceForStrategy(routing_strategy strategy,
564                                                     bool fromCache);
565
566        // change the route of the specified output. Returns the number of ms we have slept to
567        // allow new routing to take effect in certain cases.
568        uint32_t setOutputDevice(audio_io_handle_t output,
569                             audio_devices_t device,
570                             bool force = false,
571                             int delayMs = 0,
572                             audio_patch_handle_t *patchHandle = NULL,
573                             const char* address = NULL);
574        status_t resetOutputDevice(audio_io_handle_t output,
575                                   int delayMs = 0,
576                                   audio_patch_handle_t *patchHandle = NULL);
577        status_t setInputDevice(audio_io_handle_t input,
578                                audio_devices_t device,
579                                bool force = false,
580                                audio_patch_handle_t *patchHandle = NULL);
581        status_t resetInputDevice(audio_io_handle_t input,
582                                  audio_patch_handle_t *patchHandle = NULL);
583
584        // select input device corresponding to requested audio source
585        virtual audio_devices_t getDeviceForInputSource(audio_source_t inputSource);
586
587        // return io handle of active input or 0 if no input is active
588        //    Only considers inputs from physical devices (e.g. main mic, headset mic) when
589        //    ignoreVirtualInputs is true.
590        audio_io_handle_t getActiveInput(bool ignoreVirtualInputs = true);
591
592        uint32_t activeInputsCount() const;
593
594        // initialize volume curves for each strategy and device category
595        void initializeVolumeCurves();
596
597        // compute the actual volume for a given stream according to the requested index and a particular
598        // device
599        virtual float computeVolume(audio_stream_type_t stream, int index,
600                                    audio_io_handle_t output, audio_devices_t device);
601
602        // check that volume change is permitted, compute and send new volume to audio hardware
603        status_t checkAndSetVolume(audio_stream_type_t stream, int index, audio_io_handle_t output,
604                                   audio_devices_t device, int delayMs = 0, bool force = false);
605
606        // apply all stream volumes to the specified output and device
607        void applyStreamVolumes(audio_io_handle_t output, audio_devices_t device, int delayMs = 0, bool force = false);
608
609        // Mute or unmute all streams handled by the specified strategy on the specified output
610        void setStrategyMute(routing_strategy strategy,
611                             bool on,
612                             audio_io_handle_t output,
613                             int delayMs = 0,
614                             audio_devices_t device = (audio_devices_t)0);
615
616        // Mute or unmute the stream on the specified output
617        void setStreamMute(audio_stream_type_t stream,
618                           bool on,
619                           audio_io_handle_t output,
620                           int delayMs = 0,
621                           audio_devices_t device = (audio_devices_t)0);
622
623        // handle special cases for sonification strategy while in call: mute streams or replace by
624        // a special tone in the device used for communication
625        void handleIncallSonification(audio_stream_type_t stream, bool starting, bool stateChange);
626
627        // true if device is in a telephony or VoIP call
628        virtual bool isInCall();
629
630        // true if given state represents a device in a telephony or VoIP call
631        virtual bool isStateInCall(int state);
632
633        // when a device is connected, checks if an open output can be routed
634        // to this device. If none is open, tries to open one of the available outputs.
635        // Returns an output suitable to this device or 0.
636        // when a device is disconnected, checks if an output is not used any more and
637        // returns its handle if any.
638        // transfers the audio tracks and effects from one output thread to another accordingly.
639        status_t checkOutputsForDevice(const sp<DeviceDescriptor> devDesc,
640                                       audio_policy_dev_state_t state,
641                                       SortedVector<audio_io_handle_t>& outputs,
642                                       const String8 address);
643
644        status_t checkInputsForDevice(audio_devices_t device,
645                                      audio_policy_dev_state_t state,
646                                      SortedVector<audio_io_handle_t>& inputs,
647                                      const String8 address);
648
649        // close an output and its companion duplicating output.
650        void closeOutput(audio_io_handle_t output);
651
652        // close an input.
653        void closeInput(audio_io_handle_t input);
654
655        // checks and if necessary changes outputs used for all strategies.
656        // must be called every time a condition that affects the output choice for a given strategy
657        // changes: connected device, phone state, force use...
658        // Must be called before updateDevicesAndOutputs()
659        void checkOutputForStrategy(routing_strategy strategy);
660
661        // Same as checkOutputForStrategy() but for a all strategies in order of priority
662        void checkOutputForAllStrategies();
663
664        // manages A2DP output suspend/restore according to phone state and BT SCO usage
665        void checkA2dpSuspend();
666
667        // returns the A2DP output handle if it is open or 0 otherwise
668        audio_io_handle_t getA2dpOutput();
669
670        // selects the most appropriate device on output for current state
671        // must be called every time a condition that affects the device choice for a given output is
672        // changed: connected device, phone state, force use, output start, output stop..
673        // see getDeviceForStrategy() for the use of fromCache parameter
674        audio_devices_t getNewOutputDevice(audio_io_handle_t output, bool fromCache);
675
676        // updates cache of device used by all strategies (mDeviceForStrategy[])
677        // must be called every time a condition that affects the device choice for a given strategy is
678        // changed: connected device, phone state, force use...
679        // cached values are used by getDeviceForStrategy() if parameter fromCache is true.
680         // Must be called after checkOutputForAllStrategies()
681        void updateDevicesAndOutputs();
682
683        // selects the most appropriate device on input for current state
684        audio_devices_t getNewInputDevice(audio_io_handle_t input);
685
686        virtual uint32_t getMaxEffectsCpuLoad();
687        virtual uint32_t getMaxEffectsMemory();
688#ifdef AUDIO_POLICY_TEST
689        virtual     bool        threadLoop();
690                    void        exit();
691        int testOutputIndex(audio_io_handle_t output);
692#endif //AUDIO_POLICY_TEST
693
694        status_t setEffectEnabled(const sp<EffectDescriptor>& effectDesc, bool enabled);
695
696        // returns the category the device belongs to with regard to volume curve management
697        static device_category getDeviceCategory(audio_devices_t device);
698
699        // extract one device relevant for volume control from multiple device selection
700        static audio_devices_t getDeviceForVolume(audio_devices_t device);
701
702        SortedVector<audio_io_handle_t> getOutputsForDevice(audio_devices_t device,
703                        DefaultKeyedVector<audio_io_handle_t, sp<AudioOutputDescriptor> > openOutputs);
704        bool vectorsEqual(SortedVector<audio_io_handle_t>& outputs1,
705                                           SortedVector<audio_io_handle_t>& outputs2);
706
707        // mute/unmute strategies using an incompatible device combination
708        // if muting, wait for the audio in pcm buffer to be drained before proceeding
709        // if unmuting, unmute only after the specified delay
710        // Returns the number of ms waited
711        uint32_t  checkDeviceMuteStrategies(sp<AudioOutputDescriptor> outputDesc,
712                                            audio_devices_t prevDevice,
713                                            uint32_t delayMs);
714
715        audio_io_handle_t selectOutput(const SortedVector<audio_io_handle_t>& outputs,
716                                       audio_output_flags_t flags,
717                                       audio_format_t format);
718        // samplingRate parameter is an in/out and so may be modified
719        sp<IOProfile> getInputProfile(audio_devices_t device,
720                                   uint32_t& samplingRate,
721                                   audio_format_t format,
722                                   audio_channel_mask_t channelMask,
723                                   audio_input_flags_t flags);
724        sp<IOProfile> getProfileForDirectOutput(audio_devices_t device,
725                                                       uint32_t samplingRate,
726                                                       audio_format_t format,
727                                                       audio_channel_mask_t channelMask,
728                                                       audio_output_flags_t flags);
729
730        audio_io_handle_t selectOutputForEffects(const SortedVector<audio_io_handle_t>& outputs);
731
732        bool isNonOffloadableEffectEnabled();
733
734        status_t addAudioPatch(audio_patch_handle_t handle,
735                               const sp<AudioPatch>& patch);
736        status_t removeAudioPatch(audio_patch_handle_t handle);
737
738        sp<AudioOutputDescriptor> getOutputFromId(audio_port_handle_t id) const;
739        sp<AudioInputDescriptor> getInputFromId(audio_port_handle_t id) const;
740        sp<HwModule> getModuleForDevice(audio_devices_t device) const;
741        sp<HwModule> getModuleFromName(const char *name) const;
742        audio_devices_t availablePrimaryOutputDevices();
743        audio_devices_t availablePrimaryInputDevices();
744
745        void updateCallRouting(audio_devices_t rxDevice, int delayMs = 0);
746
747        //
748        // Audio policy configuration file parsing (audio_policy.conf)
749        //
750        static uint32_t stringToEnum(const struct StringToEnum *table,
751                                     size_t size,
752                                     const char *name);
753        static const char *enumToString(const struct StringToEnum *table,
754                                      size_t size,
755                                      uint32_t value);
756        static bool stringToBool(const char *value);
757        static uint32_t parseOutputFlagNames(char *name);
758        static uint32_t parseInputFlagNames(char *name);
759        static audio_devices_t parseDeviceNames(char *name);
760        void loadHwModule(cnode *root);
761        void loadHwModules(cnode *root);
762        void loadGlobalConfig(cnode *root, const sp<HwModule>& module);
763        status_t loadAudioPolicyConfig(const char *path);
764        void defaultAudioPolicyConfig(void);
765
766
767        uid_t mUidCached;
768        AudioPolicyClientInterface *mpClientInterface;  // audio policy client interface
769        audio_io_handle_t mPrimaryOutput;              // primary output handle
770        // list of descriptors for outputs currently opened
771        DefaultKeyedVector<audio_io_handle_t, sp<AudioOutputDescriptor> > mOutputs;
772        // copy of mOutputs before setDeviceConnectionState() opens new outputs
773        // reset to mOutputs when updateDevicesAndOutputs() is called.
774        DefaultKeyedVector<audio_io_handle_t, sp<AudioOutputDescriptor> > mPreviousOutputs;
775        DefaultKeyedVector<audio_io_handle_t, sp<AudioInputDescriptor> > mInputs;     // list of input descriptors
776        DeviceVector  mAvailableOutputDevices; // all available output devices
777        DeviceVector  mAvailableInputDevices;  // all available input devices
778        int mPhoneState;                                                    // current phone state
779        audio_policy_forced_cfg_t mForceUse[AUDIO_POLICY_FORCE_USE_CNT];   // current forced use configuration
780
781        StreamDescriptor mStreams[AUDIO_STREAM_CNT];           // stream descriptors for volume control
782        bool    mLimitRingtoneVolume;                                       // limit ringtone volume to music volume if headset connected
783        audio_devices_t mDeviceForStrategy[NUM_STRATEGIES];
784        float   mLastVoiceVolume;                                           // last voice volume value sent to audio HAL
785
786        // Maximum CPU load allocated to audio effects in 0.1 MIPS (ARMv5TE, 0 WS memory) units
787        static const uint32_t MAX_EFFECTS_CPU_LOAD = 1000;
788        // Maximum memory allocated to audio effects in KB
789        static const uint32_t MAX_EFFECTS_MEMORY = 512;
790        uint32_t mTotalEffectsCpuLoad; // current CPU load used by effects
791        uint32_t mTotalEffectsMemory;  // current memory used by effects
792        KeyedVector<int, sp<EffectDescriptor> > mEffects;  // list of registered audio effects
793        bool    mA2dpSuspended;  // true if A2DP output is suspended
794        sp<DeviceDescriptor> mDefaultOutputDevice; // output device selected by default at boot time
795        bool mSpeakerDrcEnabled;// true on devices that use DRC on the DEVICE_CATEGORY_SPEAKER path
796                                // to boost soft sounds, used to adjust volume curves accordingly
797
798        Vector < sp<HwModule> > mHwModules;
799        volatile int32_t mNextUniqueId;
800        volatile int32_t mAudioPortGeneration;
801
802        DefaultKeyedVector<audio_patch_handle_t, sp<AudioPatch> > mAudioPatches;
803
804        DefaultKeyedVector<audio_session_t, audio_io_handle_t> mSoundTriggerSessions;
805
806        sp<AudioPatch> mCallTxPatch;
807        sp<AudioPatch> mCallRxPatch;
808
809#ifdef AUDIO_POLICY_TEST
810        Mutex   mLock;
811        Condition mWaitWorkCV;
812
813        int             mCurOutput;
814        bool            mDirectOutput;
815        audio_io_handle_t mTestOutputs[NUM_TEST_OUTPUTS];
816        int             mTestInput;
817        uint32_t        mTestDevice;
818        uint32_t        mTestSamplingRate;
819        uint32_t        mTestFormat;
820        uint32_t        mTestChannels;
821        uint32_t        mTestLatencyMs;
822#endif //AUDIO_POLICY_TEST
823
824private:
825        static float volIndexToAmpl(audio_devices_t device, const StreamDescriptor& streamDesc,
826                int indexInUi);
827        // updates device caching and output for streams that can influence the
828        //    routing of notifications
829        void handleNotificationRoutingForStream(audio_stream_type_t stream);
830        static bool isVirtualInputDevice(audio_devices_t device);
831        static bool deviceDistinguishesOnAddress(audio_devices_t device);
832        // find the outputs on a given output descriptor that have the given address.
833        // to be called on an AudioOutputDescriptor whose supported devices (as defined
834        //   in mProfile->mSupportedDevices) matches the device whose address is to be matched.
835        // see deviceDistinguishesOnAddress(audio_devices_t) for whether the device type is one
836        //   where addresses are used to distinguish between one connected device and another.
837        void findIoHandlesByAddress(sp<AudioOutputDescriptor> desc /*in*/,
838                const String8 address /*in*/,
839                SortedVector<audio_io_handle_t>& outputs /*out*/);
840        uint32_t nextUniqueId();
841        uint32_t nextAudioPortGeneration();
842        uint32_t curAudioPortGeneration() const { return mAudioPortGeneration; }
843        // internal method to return the output handle for the given device and format
844        audio_io_handle_t getOutputForDevice(
845                audio_devices_t device,
846                audio_stream_type_t stream,
847                uint32_t samplingRate,
848                audio_format_t format,
849                audio_channel_mask_t channelMask,
850                audio_output_flags_t flags,
851                const audio_offload_info_t *offloadInfo);
852        // internal function to derive a stream type value from audio attributes
853        audio_stream_type_t streamTypefromAttributesInt(const audio_attributes_t *attr);
854};
855
856};
857