Cross Reference: /hardware/invensense/60xx/libsensors

Lines Matching refs:enable
219     /* reset driver master enable */
351     /* disable driver master enable the first sensor goes on */
444         LOGE("HAL:Cannot enable quaternion\n");
596     // onDMP(1);                //Can't enable here. See note onDMP()
682     /* Turn off Gyro master enable          */
686         LOGE("HAL:could not disable gyro master enable");
776                 "HAL:Power state already enable/disable curr=%d new=%d",
789     //Sequence to enable DMP
843             LOGE("HAL:ERR can't enable LP Quaternion");
914     /* need to also turn on/off the master enable */
936     /* need to also turn on/off the master enable */
955     int res = mCompassSensor->enable(ID_M, en);
1020     // Sequence to enable or disable a sensor
1021     // 1. enable Power state
1022     // 2. reset master enable (=0)
1023     // 3. enable or disable a sensor
1024     // 4. set master enable (=1)
1041         /* reset master enable */
1079                 /* reset master enable */
1111                 // enable DMP
1133                 // enable DMP
1135                 // enable DMP event interrupt only (no data interrupt)
1138                     LOGE("HAL:ERR can't enable DMP event interrupt");
1293 int MPLSensor::enable(int32_t handle, int en)
1303         LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s", sname.string(), handle,
1358     LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s", sname.string(), handle,
1378         LOGV_IF(PROCESS_VERBOSE, "HAL:enable : mEnabled = %d", mEnabled);
1569         // 1. enable Power state
1570         // 2. reset master enable
1572         // 4. set master enable
1577         // reset master enable
2148     // reset master enable
2154             LOGE("HAL:ERR can't enable Android orientation");
2161         // enable DMP
2175         // enable accel engine
2712     sprintf(mpu.chip_enable, "%s%s", sysfs_path, "/buffer/enable");