Cross Reference: /hardware/invensense/6515/libsensors

Lines Matching defs:on
11 * distributed under the License is distributed on an "AS IS" BASIS,
169     /* instantiate pressure sensor on secondary bus */
1172     LOGV_IF(PROCESS_VERBOSE, "HAL:DMP is set %s", (dmpState ? "on" : "off"));
1797         /* if neither step detector or step count is on */
1852     /* need to also turn on/off the master enable */
1874     /* need to also turn on/off the master enable */
1887     /* need to also turn on/off the master enable */
1964         /* Invensense Pressure on secondary bus */
2079     int on = 1;
2241                 res = enableAccel(on);
2302 /* check if batch mode should be turned on or not */
2323                     "hardware sensor on continuous mode:%d", i);
2341     // if virtual sensors are on but not batched, turn off batch mode.
2345                      "composite sensor on continuous mode:%d", i);
2351         LOGV("HAL:computeBatchSensorMask: step detector on continuous mode.");
2538            LOGE("HAL:Cannot store calibration on file");
3459                 // compass on secondary bus
3600             /* if gyros are on and we got a no motion, set a flag
3744            Need to flush it if no sensor is on, to avoid infinite
4753 /** fill in the sensor list based on which sensors are configured.
4953 /* fillRV depends on values of gyro, accel and compass in the list */
4958     /* compute power on the fly */
4969 /* fillGMRV depends on values of accel and mag in the list */
4974     /* compute power on the fly */
4984 /* fillGRV depends on values of gyro and accel in the list */
4989     /* compute power on the fly */
5460     /* add scaling here - depends on self test parameters */
6298     // Turn on enable
6330        compass sensors is turned on */