Lines Matching refs:DEBUG_PRINT_LOW

134 #undef DEBUG_PRINT_LOW
138 #define DEBUG_PRINT_LOW ALOGV
231 DEBUG_PRINT_LOW("omx_vdec: post_message %d pipe out%d\n", id,omx->m_pipe_out);
233 DEBUG_PRINT_LOW("post_message to pipe done %d\n",ret_value);
327 DEBUG_PRINT_LOW("Insert_ts(): Inserting TIMESTAMP (%lld) at idx (%d)",
335 DEBUG_PRINT_LOW("Timestamp array list is FULL. Unsuccessful insert");
372 DEBUG_PRINT_LOW("Timestamp array list is empty. Unsuccessful pop");
380 DEBUG_PRINT_LOW("Pop_min_ts:Timestamp (%lld), index(%d)",
394 DEBUG_PRINT_LOW("reset_ts_list(): Resetting timestamp array list");
858 DEBUG_PRINT_LOW("\n Input Flush completed - Notify Client");
868 DEBUG_PRINT_LOW("\n Output flush done hence issue stop");
908 DEBUG_PRINT_LOW("\n Notify Output Flush done");
917 DEBUG_PRINT_LOW("\n Internal flush complete");
936 DEBUG_PRINT_LOW("\n Input flush done hence issue stop");
966 DEBUG_PRINT_LOW("\n OMX_COMPONENT_GENERATE_START_DONE Success");
969 DEBUG_PRINT_LOW("\n Move to executing");
991 DEBUG_PRINT_LOW("\n Event Handler callback is NULL");
1009 DEBUG_PRINT_LOW("\n OMX_COMPONENT_GENERATE_PAUSE_DONE nofity");
1039 DEBUG_PRINT_LOW("\n Moving the decoder to execute state");
1070 DEBUG_PRINT_LOW("\n OMX_COMPONENT_GENERATE_STOP_DONE Success");
1074 DEBUG_PRINT_LOW("\n Move to Idle State");
1290 DEBUG_PRINT_LOW("\n H263 Decoder selected");
1304 DEBUG_PRINT_LOW ("\n DIVX 311 Decoder selected");
1696 DEBUG_PRINT_LOW("\n send_command: Recieved a Command from Client");
1711 DEBUG_PRINT_LOW("\n send_command: Command Processed\n");
1739 DEBUG_PRINT_LOW("\n send_command_proxy(): cmd = %d", cmd);
1758 DEBUG_PRINT_LOW("send_command_proxy(): Loaded-->Idle\n");
1762 DEBUG_PRINT_LOW("send_command_proxy(): Loaded-->Idle-Pending\n");
1781 DEBUG_PRINT_LOW("send_command_proxy(): Loaded-->WaitForResources\n");
1827 DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Loaded\n");
1831 DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Loaded-Pending\n");
1840 DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Executing\n");
1881 DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Pause\n");
1904 DEBUG_PRINT_LOW("\n Command Recieved in OMX_StateExecuting");
1911 DEBUG_PRINT_LOW("\n send_command_proxy(): Executing --> Idle \n");
1924 DEBUG_PRINT_LOW("\n PAUSE Command Issued");
1936 DEBUG_PRINT_LOW("send_command_proxy(): Executing-->Pause\n");
1985 DEBUG_PRINT_LOW("\n Pause --> Executing \n");
1997 DEBUG_PRINT_LOW("send_command_proxy(): Idle-->Executing\n");
2008 DEBUG_PRINT_LOW("\n Pause --> Idle \n");
2065 DEBUG_PRINT_LOW("send_command_proxy(): WaitForResources-->Loaded\n");
2138 DEBUG_PRINT_LOW("\n Set the Semaphore");
2161 DEBUG_PRINT_LOW("send_command_proxy(): Disabled-->Enabled Pending\n");
2169 DEBUG_PRINT_LOW("\n Enable output Port command recieved");
2182 DEBUG_PRINT_LOW("send_command_proxy(): Disabled-->Enabled Pending\n");
2222 DEBUG_PRINT_LOW("\n Disable output Port command recieved");
2329 DEBUG_PRINT_LOW("\n Initiate Output Flush");
2332 DEBUG_PRINT_LOW("\n Buffer queue size %d pending buf cnt %d",
2335 DEBUG_PRINT_LOW("\n ID(%x) P1(%x) P2(%x)", ident, p1, p2);
2378 DEBUG_PRINT_LOW("\n Initiate Input Flush \n");
2381 DEBUG_PRINT_LOW("\n Check if the Queue is empty \n");
2388 DEBUG_PRINT_LOW("\n Flush Input Heap Buffer %p",(OMX_BUFFERHEADERTYPE *)p2);
2394 DEBUG_PRINT_LOW("\n Flush Input OMX_COMPONENT_GENERATE_ETB %p, pending_input_buffers %d",
2400 DEBUG_PRINT_LOW("\n Flush Input OMX_COMPONENT_GENERATE_EBD %p",
2409 DEBUG_PRINT_LOW("\n Reset all the variables before flusing");
2418 DEBUG_PRINT_LOW("\n Initialize parser");
2508 DEBUG_PRINT_LOW("\n Value of this pointer in post_event 0x%x", p2);
2543 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoProfileLevelQuerySupported nProfileIndex ret NoMore %d\n",
2615 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoProfileLevelQuerySupported nProfileIndex ret NoMore %d\n",
2699 DEBUG_PRINT_LOW("get_parameter: \n");
2707 DEBUG_PRINT_LOW("Get Param in Invalid paramData \n");
2716 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamPortDefinition\n");
2726 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoInit\n");
2738 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoPortFormat\n");
2779 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoPortFormat:"\
2798 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamAudioInit\n");
2810 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamImageInit\n");
2833 DEBUG_PRINT_LOW("Getparameter: OMX_IndexParamStandardComponentRole %d\n",
2845 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamPriorityMgmt\n");
2856 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamCompBufferSupplier\n");
2872 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoAvc %08x\n",
2878 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoH263 %08x\n",
2884 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoMpeg4 %08x\n",
2890 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoMpeg2 %08x\n",
2896 DEBUG_PRINT_LOW("get_parameter: OMX_IndexParamVideoProfileLevelQuerySupported %08x\n", paramIndex);
2910 DEBUG_PRINT_LOW("get_parameter: OMX_GoogleAndroidIndexGetAndroidNativeBufferUsage\n");
2943 DEBUG_PRINT_LOW("\n get_parameter returning WxH(%d x %d) SxSH(%d x %d)\n",
2955 DEBUG_PRINT_LOW("Inside use_android_native_buffer");
3040 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamPortDefinition H= %d, W = %d\n",
3051 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamPortDefinition OP port");
3114 DEBUG_PRINT_LOW("set_parameter: frm_int(%u) fps(%.2f)",
3118 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamPortDefinition IP port\n");
3124 DEBUG_PRINT_LOW("\n SetParam IP: WxH(%d x %d)\n",
3179 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamVideoPortFormat %d\n",
3197 DEBUG_PRINT_LOW("set_parameter: OMX_IndexQcomParamPortDefinitionType %d\n",
3249 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamStandardComponentRole %s\n",
3255 DEBUG_PRINT_LOW("Set Parameter called in valid state");
3359 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamPriorityMgmt %d\n",
3362 DEBUG_PRINT_LOW("set_parameter: priorityMgmtype %d\n",
3374 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamCompBufferSupplier %d\n",
3388 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamVideoAvc %d\n",
3394 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamVideoH263 %d\n",
3400 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamVideoMpeg4 %d\n",
3406 DEBUG_PRINT_LOW("set_parameter: OMX_IndexParamVideoMpeg2 %d\n",
3612 DEBUG_PRINT_LOW("set_parameter: "
3826 DEBUG_PRINT_LOW("\n Set Config Called");
3837 DEBUG_PRINT_LOW("\n Index OMX_IndexVendorVideoExtraData called");
3840 DEBUG_PRINT_LOW("\n Index OMX_IndexVendorVideoExtraData AVC");
3873 DEBUG_PRINT_LOW("Rxd SPS+PPS nPortIndex[%d] len[%d] data[0x%x]\n",
3918 DEBUG_PRINT_LOW("set_config - VC1 simple/main profile\n");
3929 DEBUG_PRINT_LOW("set_config - VC1 Advance profile\n");
3940 DEBUG_PRINT_LOW("set_config - VC1 Simple/Main profile struct C only\n");
3949 DEBUG_PRINT_LOW("set_config - Error: Unknown VC1 profile\n");
3960 DEBUG_PRINT_LOW("\n OMX_IndexConfigVideoNalSize called with Size %d",nal_length);
4042 DEBUG_PRINT_LOW("get_state: Returning the state %d\n",*state);
4232 DEBUG_PRINT_LOW("Use_op_buf: out_pmem=%d",m_use_output_pmem);
4258 DEBUG_PRINT_LOW("vdec: use buf: pmem_fd=0x%x",
4291 DEBUG_PRINT_LOW("setting pBuffer to private_handle_t %p", handle);
4324 DEBUG_PRINT_LOW("Inside %s, %p\n", __FUNCTION__, buffer);
4418 DEBUG_PRINT_LOW("Use Buffer: port %u, buffer %p, eRet %d", port, *bufferHdr, error);
4471 DEBUG_PRINT_LOW("\n Free Input Buffer index = %d",index);
4475 DEBUG_PRINT_LOW("\n Free Input Buffer index = %d",index);
4492 DEBUG_PRINT_LOW("\n unmap the input buffer fd=%d",
4494 DEBUG_PRINT_LOW("\n unmap the input buffer size=%d address = %d",
4528 DEBUG_PRINT_LOW("\n Free ouput Buffer index = %d",index);
4533 DEBUG_PRINT_LOW("\n Free ouput Buffer index = %d addr = %x", index,
4543 DEBUG_PRINT_LOW("\nRelease the Output Buffer");
4562 DEBUG_PRINT_LOW("\n unmap the output buffer fd = %d",
4564 DEBUG_PRINT_LOW("\n unmap the ouput buffer size=%d address = %d",
4638 DEBUG_PRINT_LOW("\n Free Input Buffer Index %d",i);
4662 DEBUG_PRINT_LOW("\n Address of Heap Buffer %p",*bufferHdr );
4664 DEBUG_PRINT_LOW("\n Address of Pmem Buffer %p",m_phdr_pmem_ptr [i] );
4714 DEBUG_PRINT_LOW("\n Requested Size is wrong %d epected is %d",
4763 DEBUG_PRINT_LOW("\n Free Input Buffer Index %d",i);
4770 DEBUG_PRINT_LOW("\n Allocate input Buffer");
4849 DEBUG_PRINT_LOW("\n Buffer address %p of pmem",*bufferHdr);
4924 DEBUG_PRINT_LOW("Allocating First Output Buffer(%d)\n",
4937 DEBUG_PRINT_LOW("TotalBufHdr %d BufHdrSize %d PMEM %d PL %d\n",nBufHdrSize,
4941 DEBUG_PRINT_LOW("PE %d OutputBuffer Count %d \n",nPlatformEntrySize,
4986 DEBUG_PRINT_LOW("Memory Allocation Succeeded for OUT port%p\n",m_out_mem_ptr);
4989 DEBUG_PRINT_LOW("bHdr %p OutMem %p PE %p\n",bufHdr, m_out_mem_ptr,pPlatformEntry);
4990 DEBUG_PRINT_LOW(" Pmem Info = %p \n",pPMEMInfo);
5002 //DEBUG_PRINT_LOW("Initializing the Platform Entry for %d\n",i);
5069 DEBUG_PRINT_LOW("\n Free o/p ion context");
5082 DEBUG_PRINT_LOW("\n Found a Free Output Buffer Index %d",i);
5089 DEBUG_PRINT_LOW("\n Allocate Output Buffer");
5185 DEBUG_PRINT_LOW("\n Set the Output Buffer Idx: %d Addr: %x", i, drv_ctx.ptr_outputbuffer[i]);
5233 DEBUG_PRINT_LOW("\n Allocate buffer on port %d \n", (int)port);
5261 DEBUG_PRINT_LOW("Checking for Output Allocate buffer Done");
5294 DEBUG_PRINT_LOW("Allocate Buffer exit with ret Code %d\n",eRet);
5319 DEBUG_PRINT_LOW("In for decoder free_buffer \n");
5324 DEBUG_PRINT_LOW(" free buffer while Component in Loading pending\n");
5329 DEBUG_PRINT_LOW("Free Buffer while port %d disabled\n", port);
5356 DEBUG_PRINT_LOW("free_buffer on i/p port - Port idx %d \n", nPortIndex);
5365 DEBUG_PRINT_LOW("\n Free pmem Buffer index %d",nPortIndex);
5398 DEBUG_PRINT_LOW("MOVING TO DISABLED STATE \n");
5411 DEBUG_PRINT_LOW("free_buffer on o/p port - Port idx %d \n", nPortIndex);
5430 DEBUG_PRINT_LOW("FreeBuffer : If any Disable event pending,post it\n");
5432 DEBUG_PRINT_LOW("MOVING TO DISABLED STATE \n");
5483 DEBUG_PRINT_LOW("%s: codec_config buffer", __FUNCTION__);
5520 DEBUG_PRINT_LOW("\nERROR:iDivXDrmDecrypt->Decrypt %d", drmErr);
5547 DEBUG_PRINT_LOW("Non-Arbitrary mode - buffer address is: malloc %p, pmem%p in Index %d, buffer %p of size %d",
5561 DEBUG_PRINT_LOW("[ETB] BHdr(%p) pBuf(%p) nTS(%lld) nFL(%lu)",
5660 DEBUG_PRINT_LOW("\n Flush in progress return buffer ");
5673 DEBUG_PRINT_LOW("\n ETBProxy: bufhdr = %p, bufhdr->pBuffer = %p", buffer, buffer->pBuffer);
5708 DEBUG_PRINT_LOW("ETB: dmx enabled");
5714 DEBUG_PRINT_LOW("ETB: handle_demux_data - entries=%d",m_demux_entries);
5735 DEBUG_PRINT_LOW("\n Inserting TIMESTAMP (%lld) into queue", buffer->nTimeStamp);
5740 DEBUG_PRINT_LOW("\n Inserting TIMESTAMP (%lld) into queue", buffer->nTimeStamp);
5776 DEBUG_PRINT_LOW("[ETBP] pBuf(%p) nTS(%lld) Sz(%d)",
5787 DEBUG_PRINT_LOW("\n Return failed buffer");
5841 DEBUG_PRINT_LOW("[FTB] bufhdr = %p, bufhdr->pBuffer = %p", buffer, buffer->pBuffer);
5876 DEBUG_PRINT_LOW("\n FTBProxy: bufhdr = %p, bufhdr->pBuffer = %p",
5881 DEBUG_PRINT_LOW("\n Output Buffers return flush/disable condition");
5941 DEBUG_PRINT_LOW("\n Callbacks Set %p %p %p",m_cb.EmptyBufferDone,\
5991 DEBUG_PRINT_LOW("Freeing the Output Memory\n");
6001 DEBUG_PRINT_LOW("Freeing the Input Memory\n");
6026 DEBUG_PRINT_LOW("\n Free utils parser");
6056 DEBUG_PRINT_LOW("\n Calling VDEC_IOCTL_STOP_NEXT_MSG");
6199 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6211 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6223 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6227 DEBUG_PRINT_LOW("\n No more roles \n");
6242 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6246 DEBUG_PRINT_LOW("\n No more roles \n");
6255 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6259 DEBUG_PRINT_LOW("\n No more roles \n");
6270 DEBUG_PRINT_LOW("component_role_enum: role %s\n",role);
6274 DEBUG_PRINT_LOW("\n No more roles \n");
6458 DEBUG_PRINT_LOW("\n Value of m_out_mem_ptr %p",m_inp_mem_ptr);
6500 DEBUG_PRINT_LOW("\n Value of m_inp_mem_ptr %p",m_inp_mem_ptr);
6533 DEBUG_PRINT_LOW("FBD: Buffer (%p) flushed", buffer);
6565 DEBUG_PRINT_LOW("\n fill_buffer_done: bufhdr = %p, bufhdr->pBuffer = %p",
6588 DEBUG_PRINT_LOW("\n In fill Buffer done call address %p ",buffer);
6657 DEBUG_PRINT_LOW("\nWRITING extradata, size=%d,type=%d",p_extra->nSize, p_extra->eType);
6676 DEBUG_PRINT_LOW("\n Before FBD callback Accessed Pmeminfo %d",pPMEMInfo->pmem_fd);
6686 DEBUG_PRINT_LOW("\n After Fill Buffer Done callback %d",pPMEMInfo->pmem_fd);
6701 DEBUG_PRINT_LOW("NOTE: set metadata: update buffer geo with "
6719 DEBUG_PRINT_LOW("\n empty_buffer_done: bufhdr = %p, bufhdr->pBuffer = %p",
6727 DEBUG_PRINT_LOW("\n Push input from buffer done address of Buffer %p",buffer);
6735 DEBUG_PRINT_LOW("\n Push buffer into freeq address of Buffer %p",buffer);
6779 DEBUG_PRINT_LOW("\n Current timestamp (%lld),Popped TIMESTAMP (%lld) from list",
6857 DEBUG_PRINT_LOW("[RespBufDone] Buf(%p) Ts(%lld) Pic_type(%u)",
6898 DEBUG_PRINT_LOW("Old crop info: left = %u top = %u width = %u height = %u\n",
6906 DEBUG_PRINT_LOW("New crop info: left = %u top = %u width = %u height = %u\n",
6975 DEBUG_PRINT_LOW("\n Empty this arbitrary");
6981 DEBUG_PRINT_LOW("\n ETBProxyArb: bufhdr = %p, bufhdr->pBuffer = %p", buffer, buffer->pBuffer);
6982 DEBUG_PRINT_LOW("\n ETBProxyArb: nFilledLen %u, flags %d, timestamp %u",
6997 DEBUG_PRINT_LOW("\n Set Buffer as source Buffer %p time stamp %d",buffer,buffer->nTimeStamp);
6999 DEBUG_PRINT_LOW("\n Try to Push One Input Buffer ");
7004 DEBUG_PRINT_LOW("\n Push the source buffer into pendingq %p",buffer);
7025 DEBUG_PRINT_LOW("\n Get a Destination buffer from the queue");
7032 DEBUG_PRINT_LOW("\n Address of Pmem Buffer %p",pdest_frame);
7039 DEBUG_PRINT_LOW("\n Get a source buffer from the queue");
7044 DEBUG_PRINT_LOW("\n Next source Buffer %p time stamp %d",psource_frame,
7046 DEBUG_PRINT_LOW("\n Next source Buffer flag %d length %d",
7087 DEBUG_PRINT_LOW("\n Start Parsing the bit stream address %p TimeStamp %d",
7098 DEBUG_PRINT_LOW("\n Frame size %d source %p frame count %d",
7102 DEBUG_PRINT_LOW("\n TimeStamp updated %d",pdest_frame->nTimeStamp);
7106 DEBUG_PRINT_LOW("\n H263/MPEG4 Codec First Frame ");
7148 DEBUG_PRINT_LOW("\n Not a Complete Frame %d",pdest_frame->nFilledLen);
7165 DEBUG_PRINT_LOW("\n Frame Found start Decoding Size =%d TimeStamp = %x",
7167 DEBUG_PRINT_LOW("\n Found a frame size = %d number = %d",
7179 DEBUG_PRINT_LOW("\n Last frame in else dest addr") ;
7185 DEBUG_PRINT_LOW("\n Buffer Consumed return back to client %p",psource_frame);
7191 DEBUG_PRINT_LOW("\n Pull Next source Buffer %p",psource_frame);
7194 DEBUG_PRINT_LOW("\n Next source Buffer %p time stamp %d",psource_frame,
7196 DEBUG_PRINT_LOW("\n Next source Buffer flag %d length %d",
7216 DEBUG_PRINT_LOW("\n Pending h264_scratch.nFilledLen %d "
7218 DEBUG_PRINT_LOW("\n Pending pdest_frame->nFilledLen %d",pdest_frame->nFilledLen);
7228 DEBUG_PRINT_LOW("\n Copy the previous NAL (h264 scratch) into Dest frame");
7239 DEBUG_PRINT_LOW("\n Zero NAL, hence parse using start code");
7249 DEBUG_PRINT_LOW("\n Non-zero NAL length clip, hence parse with NAL size %d ",nal_length);
7262 DEBUG_PRINT_LOW("\n First NAL with Zero Length, hence Skip");
7269 DEBUG_PRINT_LOW("\n Parsed New NAL Length = %d",h264_scratch.nFilledLen);
7314 DEBUG_PRINT_LOW("\n Not a NewFrame Copy into Dest len %d",
7325 DEBUG_PRINT_LOW("\n Error:2: Destination buffer overflow for H264");
7332 DEBUG_PRINT_LOW("\n Frame Found start Decoding Size =%d TimeStamp = %x",
7334 DEBUG_PRINT_LOW("\n Found a frame size = %d number = %d",
7339 DEBUG_PRINT_LOW("\n Copy the Current Frame since and push it");
7359 DEBUG_PRINT_LOW("\n Reset the EOS Flag");
7373 DEBUG_PRINT_LOW("\n Pop the next pdest_buffer %p",pdest_frame);
7384 DEBUG_PRINT_LOW("\n Not a Complete Frame, pdest_frame->nFilledLen %d",pdest_frame->nFilledLen);
7396 DEBUG_PRINT_LOW("\n Buffer Consumed return source %p back to client",psource_frame);
7402 DEBUG_PRINT_LOW("\n EOS Reached Pass Last Buffer");
7460 DEBUG_PRINT_LOW("pdest_frame->nFilledLen = %d, nFlags = 0x%x, TimeStamp = %x",
7462 DEBUG_PRINT_LOW("\n Push AU frame number %d to driver", frame_count++);
7481 DEBUG_PRINT_LOW("\n Last frame in else dest addr %p size %d",
7493 DEBUG_PRINT_LOW("\n Pull Next source Buffer %p",psource_frame);
7496 DEBUG_PRINT_LOW("\nNext source Buffer flag %d src length %d",
7512 DEBUG_PRINT_LOW("\nFirst i/p buffer for VC1 arbitrary bytes\n");
7515 DEBUG_PRINT_LOW("\nCheck profile type in 1st source buffer\n");
7557 DEBUG_PRINT_LOW("\n VC1 AP, hence parse using frame start code");
7701 DEBUG_PRINT_LOW("\n Free o/p ion context");
7715 DEBUG_PRINT_LOW("\n Free input Heap Pointer");
7722 DEBUG_PRINT_LOW("\n Free input pmem header Pointer");
7729 DEBUG_PRINT_LOW("\n Free input pmem Pointer area");
7744 DEBUG_PRINT_LOW("\n Free Driver Context pointer");
7750 DEBUG_PRINT_LOW("\n Free ion context");
7762 DEBUG_PRINT_LOW("GetBufReq IN: ActCnt(%d) Size(%d)",
7813 DEBUG_PRINT_LOW("GetBufReq UPDATE: ActCnt(%d) Size(%d) BufSize(%d)",
7823 DEBUG_PRINT_LOW("GetBufReq OUT: ActCnt(%d) Size(%d)",
7833 DEBUG_PRINT_LOW("SetBufReq IN: ActCnt(%d) Size(%d)",
7933 DEBUG_PRINT_LOW("omx_vdec::update_portdef\n");
7996 DEBUG_PRINT_LOW(" get_parameter: Bad Port idx %d",
8005 DEBUG_PRINT_LOW("update_portdef Width = %d Height = %d Stride = %u"
8030 DEBUG_PRINT_LOW("Setting First Output Buffer(%d)\n",
8042 DEBUG_PRINT_LOW("TotalBufHdr %d BufHdrSize %d PMEM %d PL %d\n",nBufHdrSize,
8046 DEBUG_PRINT_LOW("PE %d bmSize %d \n",nPlatformEntrySize,
8077 DEBUG_PRINT_LOW("Memory Allocation Succeeded for OUT port%p\n",m_out_mem_ptr);
8080 DEBUG_PRINT_LOW("bHdr %p OutMem %p PE %p\n",bufHdr,
8082 DEBUG_PRINT_LOW(" Pmem Info = %p \n",pPMEMInfo);
8143 DEBUG_PRINT_LOW("\n Free o/p ion context");
8244 DEBUG_PRINT_LOW("set_frame_rate: frm_int(%u) fps(%f)",
8274 DEBUG_PRINT_LOW("adjust_timestamp: original ts[%lld]", act_timestamp);
8276 DEBUG_PRINT_LOW("adjust_timestamp: predicted ts[%lld]", act_timestamp);
8309 DEBUG_PRINT_LOW("handle_extradata : pBuf(%p) BufTS(%lld) Type(%x) DataSz(%u)",
8495 DEBUG_PRINT_LOW("Aligned buffer size with exreadata = %d\n", drv_ctx.op_buf.buffer_size);
8715 DEBUG_PRINT_LOW("append_portdef_extradata height = %u width = %u stride = %u"
8765 DEBUG_PRINT_LOW("Inserting address offset (%d) at idx (%d)", address_offset,m_demux_entries);
8798 DEBUG_PRINT_LOW("Extracted (%d) demux entry offsets",m_demux_entries);
8856 DEBUG_PRINT_LOW("Start_addr(%p), suffix_byte(0x%x),nal_size(%d),demux_index(%d)",
8874 DEBUG_PRINT_LOW("VC1 terminator entry");
8888 DEBUG_PRINT_LOW("desc table data size=%d", m_desc_buffer_ptr[buffer_index].desc_data_size);
8892 DEBUG_PRINT_LOW("Demux table complete!");
8928 DEBUG_PRINT_LOW("Entered vdec_alloc_h264_mv act_width: %d, act_height: %d, size: %d, alignment %d\n",
8976 DEBUG_PRINT_LOW("\n Allocated virt:%p, FD: %d of size %d count: %d \n", buf_addr,
8998 DEBUG_PRINT_LOW("\n Saving virt:%p, FD: %d of size %d count: %d \n", h264_mv_buff.buffer,
9015 DEBUG_PRINT_LOW("\n Cleaning H264_MV buffer of size %d \n",h264_mv_buff.size);
9324 DEBUG_PRINT_LOW("free_buffer(conversion): free ion mem[%d] fd=%d size=%d",
9509 DEBUG_PRINT_LOW("%s: allocated header[%d]=%p for native handle[fd=%d size=%d]",