OMX_Audio.h revision 8e846fd6b3e09f5a52f47311e97b8d8f683833d4
1/* ------------------------------------------------------------------
2 * Copyright (C) 1998-2009 PacketVideo
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 *      http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
13 * express or implied.
14 * See the License for the specific language governing permissions
15 * and limitations under the License.
16 * -------------------------------------------------------------------
17 */
18/*
19 * Copyright (c) 2008 The Khronos Group Inc.
20 *
21 * Permission is hereby granted, free of charge, to any person obtaining
22 * a copy of this software and associated documentation files (the
23 * "Software"), to deal in the Software without restriction, including
24 * without limitation the rights to use, copy, modify, merge, publish,
25 * distribute, sublicense, and/or sell copies of the Software, and to
26 * permit persons to whom the Software is furnished to do so, subject
27 * to the following conditions:
28 * The above copyright notice and this permission notice shall be included
29 * in all copies or substantial portions of the Software.
30 *
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
32 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
34 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
35 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
36 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
37 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
38 *
39 */
40
41/** @file OMX_Audio.h - OpenMax IL version 1.1.2
42 *  The structures needed by Audio components to exchange
43 *  parameters and configuration data with the componenmilts.
44 */
45
46#ifndef OMX_Audio_h
47#define OMX_Audio_h
48
49#ifdef __cplusplus
50extern "C" {
51#endif /* __cplusplus */
52
53
54/* Each OMX header must include all required header files to allow the
55 *  header to compile without errors.  The includes below are required
56 *  for this header file to compile successfully
57 */
58
59#include <OMX_Core.h>
60
61/** @defgroup midi MIDI
62 * @ingroup audio
63 */
64
65/** @defgroup effects Audio effects
66 * @ingroup audio
67 */
68
69/** @defgroup audio OpenMAX IL Audio Domain
70 * Structures for OpenMAX IL Audio domain
71 * @{
72 */
73
74/** Enumeration used to define the possible audio codings.
75 *  If "OMX_AUDIO_CodingUnused" is selected, the coding selection must
76 *  be done in a vendor specific way.  Since this is for an audio
77 *  processing element this enum is relevant.  However, for another
78 *  type of component other enums would be in this area.
79 */
80typedef enum OMX_AUDIO_CODINGTYPE {
81    OMX_AUDIO_CodingUnused = 0,  /**< Placeholder value when coding is N/A  */
82    OMX_AUDIO_CodingAutoDetect,  /**< auto detection of audio format */
83    OMX_AUDIO_CodingPCM,         /**< Any variant of PCM coding */
84    OMX_AUDIO_CodingADPCM,       /**< Any variant of ADPCM encoded data */
85    OMX_AUDIO_CodingAMR,         /**< Any variant of AMR encoded data */
86    OMX_AUDIO_CodingGSMFR,       /**< Any variant of GSM fullrate (i.e. GSM610) */
87    OMX_AUDIO_CodingGSMEFR,      /**< Any variant of GSM Enhanced Fullrate encoded data*/
88    OMX_AUDIO_CodingGSMHR,       /**< Any variant of GSM Halfrate encoded data */
89    OMX_AUDIO_CodingPDCFR,       /**< Any variant of PDC Fullrate encoded data */
90    OMX_AUDIO_CodingPDCEFR,      /**< Any variant of PDC Enhanced Fullrate encoded data */
91    OMX_AUDIO_CodingPDCHR,       /**< Any variant of PDC Halfrate encoded data */
92    OMX_AUDIO_CodingTDMAFR,      /**< Any variant of TDMA Fullrate encoded data (TIA/EIA-136-420) */
93    OMX_AUDIO_CodingTDMAEFR,     /**< Any variant of TDMA Enhanced Fullrate encoded data (TIA/EIA-136-410) */
94    OMX_AUDIO_CodingQCELP8,      /**< Any variant of QCELP 8kbps encoded data */
95    OMX_AUDIO_CodingQCELP13,     /**< Any variant of QCELP 13kbps encoded data */
96    OMX_AUDIO_CodingEVRC,        /**< Any variant of EVRC encoded data */
97    OMX_AUDIO_CodingSMV,         /**< Any variant of SMV encoded data */
98    OMX_AUDIO_CodingG711,        /**< Any variant of G.711 encoded data */
99    OMX_AUDIO_CodingG723,        /**< Any variant of G.723 dot 1 encoded data */
100    OMX_AUDIO_CodingG726,        /**< Any variant of G.726 encoded data */
101    OMX_AUDIO_CodingG729,        /**< Any variant of G.729 encoded data */
102    OMX_AUDIO_CodingAAC,         /**< Any variant of AAC encoded data */
103    OMX_AUDIO_CodingMP3,         /**< Any variant of MP3 encoded data */
104    OMX_AUDIO_CodingSBC,         /**< Any variant of SBC encoded data */
105    OMX_AUDIO_CodingVORBIS,      /**< Any variant of VORBIS encoded data */
106    OMX_AUDIO_CodingWMA,         /**< Any variant of WMA encoded data */
107    OMX_AUDIO_CodingRA,          /**< Any variant of RA encoded data */
108    OMX_AUDIO_CodingMIDI,        /**< Any variant of MIDI encoded data */
109    OMX_AUDIO_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
110    OMX_AUDIO_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
111    OMX_AUDIO_CodingMax = 0x7FFFFFFF
112} OMX_AUDIO_CODINGTYPE;
113
114
115/** The PortDefinition structure is used to define all of the parameters
116 *  necessary for the compliant component to setup an input or an output audio
117 *  path.  If additional information is needed to define the parameters of the
118 *  port (such as frequency), additional structures must be sent such as the
119 *  OMX_AUDIO_PARAM_PCMMODETYPE structure to supply the extra parameters for the port.
120 */
121typedef struct OMX_AUDIO_PORTDEFINITIONTYPE {
122    OMX_STRING cMIMEType;            /**< MIME type of data for the port */
123    OMX_NATIVE_DEVICETYPE pNativeRender; /** < platform specific reference
124                                               for an output device,
125                                               otherwise this field is 0 */
126    OMX_BOOL bFlagErrorConcealment;  /**< Turns on error concealment if it is
127                                          supported by the OMX component */
128    OMX_AUDIO_CODINGTYPE eEncoding;  /**< Type of data expected for this
129                                          port (e.g. PCM, AMR, MP3, etc) */
130} OMX_AUDIO_PORTDEFINITIONTYPE;
131
132
133/**  Port format parameter.  This structure is used to enumerate
134  *  the various data input/output format supported by the port.
135  */
136typedef struct OMX_AUDIO_PARAM_PORTFORMATTYPE {
137    OMX_U32 nSize;                  /**< size of the structure in bytes */
138    OMX_VERSIONTYPE nVersion;       /**< OMX specification version information */
139    OMX_U32 nPortIndex;             /**< Indicates which port to set */
140    OMX_U32 nIndex;                 /**< Indicates the enumeration index for the format from 0x0 to N-1 */
141    OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this port (e.g. PCM, AMR, MP3, etc) */
142} OMX_AUDIO_PARAM_PORTFORMATTYPE;
143
144
145/** PCM mode type  */
146typedef enum OMX_AUDIO_PCMMODETYPE {
147    OMX_AUDIO_PCMModeLinear = 0,  /**< Linear PCM encoded data */
148    OMX_AUDIO_PCMModeALaw,        /**< A law PCM encoded data (G.711) */
149    OMX_AUDIO_PCMModeMULaw,       /**< Mu law PCM encoded data (G.711)  */
150    OMX_AUDIO_PCMModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
151    OMX_AUDIO_PCMModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
152    OMX_AUDIO_PCMModeMax = 0x7FFFFFFF
153} OMX_AUDIO_PCMMODETYPE;
154
155
156typedef enum OMX_AUDIO_CHANNELTYPE {
157    OMX_AUDIO_ChannelNone = 0x0,    /**< Unused or empty */
158    OMX_AUDIO_ChannelLF   = 0x1,    /**< Left front */
159    OMX_AUDIO_ChannelRF   = 0x2,    /**< Right front */
160    OMX_AUDIO_ChannelCF   = 0x3,    /**< Center front */
161    OMX_AUDIO_ChannelLS   = 0x4,    /**< Left surround */
162    OMX_AUDIO_ChannelRS   = 0x5,    /**< Right surround */
163    OMX_AUDIO_ChannelLFE  = 0x6,    /**< Low frequency effects */
164    OMX_AUDIO_ChannelCS   = 0x7,    /**< Back surround */
165    OMX_AUDIO_ChannelLR   = 0x8,    /**< Left rear. */
166    OMX_AUDIO_ChannelRR   = 0x9,    /**< Right rear. */
167    OMX_AUDIO_ChannelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
168    OMX_AUDIO_ChannelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
169    OMX_AUDIO_ChannelMax  = 0x7FFFFFFF
170} OMX_AUDIO_CHANNELTYPE;
171
172#define OMX_AUDIO_MAXCHANNELS 16  /**< maximum number distinct audio channels that a buffer may contain */
173#define OMX_MIN_PCMPAYLOAD_MSEC 5 /**< Minimum audio buffer payload size for uncompressed (PCM) audio */
174
175/** PCM format description */
176typedef struct OMX_AUDIO_PARAM_PCMMODETYPE {
177    OMX_U32 nSize;                    /**< Size of this structure, in Bytes */
178    OMX_VERSIONTYPE nVersion;         /**< OMX specification version information */
179    OMX_U32 nPortIndex;               /**< port that this structure applies to */
180    OMX_U32 nChannels;                /**< Number of channels (e.g. 2 for stereo) */
181    OMX_NUMERICALDATATYPE eNumData;   /**< indicates PCM data as signed or unsigned */
182    OMX_ENDIANTYPE eEndian;           /**< indicates PCM data as little or big endian */
183    OMX_BOOL bInterleaved;            /**< True for normal interleaved data; false for
184                                           non-interleaved data (e.g. block data) */
185    OMX_U32 nBitPerSample;            /**< Bit per sample */
186    OMX_U32 nSamplingRate;            /**< Sampling rate of the source data.  Use 0 for
187                                           variable or unknown sampling rate. */
188    OMX_AUDIO_PCMMODETYPE ePCMMode;   /**< PCM mode enumeration */
189    OMX_AUDIO_CHANNELTYPE eChannelMapping[OMX_AUDIO_MAXCHANNELS]; /**< Slot i contains channel defined by eChannelMap[i] */
190
191} OMX_AUDIO_PARAM_PCMMODETYPE;
192
193
194/** Audio channel mode.  This is used by both AAC and MP3, although the names are more appropriate
195 * for the MP3.  For example, JointStereo for MP3 is CouplingChannels for AAC.
196 */
197typedef enum OMX_AUDIO_CHANNELMODETYPE {
198    OMX_AUDIO_ChannelModeStereo = 0,  /**< 2 channels, the bitrate allocation between those
199                                          two channels changes accordingly to each channel information */
200    OMX_AUDIO_ChannelModeJointStereo, /**< mode that takes advantage of what is common between
201                                           2 channels for higher compression gain */
202    OMX_AUDIO_ChannelModeDual,        /**< 2 mono-channels, each channel is encoded with half
203                                           the bitrate of the overall bitrate */
204    OMX_AUDIO_ChannelModeMono,        /**< Mono channel mode */
205    OMX_AUDIO_ChannelModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
206    OMX_AUDIO_ChannelModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
207    OMX_AUDIO_ChannelModeMax = 0x7FFFFFFF
208} OMX_AUDIO_CHANNELMODETYPE;
209
210
211typedef enum OMX_AUDIO_MP3STREAMFORMATTYPE {
212    OMX_AUDIO_MP3StreamFormatMP1Layer3 = 0, /**< MP3 Audio MPEG 1 Layer 3 Stream format */
213    OMX_AUDIO_MP3StreamFormatMP2Layer3,     /**< MP3 Audio MPEG 2 Layer 3 Stream format */
214    OMX_AUDIO_MP3StreamFormatMP2_5Layer3,   /**< MP3 Audio MPEG2.5 Layer 3 Stream format */
215    OMX_AUDIO_MP3StreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
216    OMX_AUDIO_MP3StreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
217    OMX_AUDIO_MP3StreamFormatMax = 0x7FFFFFFF
218} OMX_AUDIO_MP3STREAMFORMATTYPE;
219
220/** MP3 params */
221typedef struct OMX_AUDIO_PARAM_MP3TYPE {
222    OMX_U32 nSize;                 /**< size of the structure in bytes */
223    OMX_VERSIONTYPE nVersion;      /**< OMX specification version information */
224    OMX_U32 nPortIndex;            /**< port that this structure applies to */
225    OMX_U32 nChannels;             /**< Number of channels */
226    OMX_U32 nBitRate;              /**< Bit rate of the input data.  Use 0 for variable
227                                        rate or unknown bit rates */
228    OMX_U32 nSampleRate;           /**< Sampling rate of the source data.  Use 0 for
229                                        variable or unknown sampling rate. */
230    OMX_U32 nAudioBandWidth;       /**< Audio band width (in Hz) to which an encoder should
231                                        limit the audio signal. Use 0 to let encoder decide */
232    OMX_AUDIO_CHANNELMODETYPE eChannelMode;   /**< Channel mode enumeration */
233    OMX_AUDIO_MP3STREAMFORMATTYPE eFormat;  /**< MP3 stream format */
234} OMX_AUDIO_PARAM_MP3TYPE;
235
236
237typedef enum OMX_AUDIO_AACSTREAMFORMATTYPE {
238    OMX_AUDIO_AACStreamFormatMP2ADTS = 0, /**< AAC Audio Data Transport Stream 2 format */
239    OMX_AUDIO_AACStreamFormatMP4ADTS,     /**< AAC Audio Data Transport Stream 4 format */
240    OMX_AUDIO_AACStreamFormatMP4LOAS,     /**< AAC Low Overhead Audio Stream format */
241    OMX_AUDIO_AACStreamFormatMP4LATM,     /**< AAC Low overhead Audio Transport Multiplex */
242    OMX_AUDIO_AACStreamFormatADIF,        /**< AAC Audio Data Interchange Format */
243    OMX_AUDIO_AACStreamFormatMP4FF,       /**< AAC inside MPEG-4/ISO File Format */
244    OMX_AUDIO_AACStreamFormatRAW,         /**< AAC Raw Format */
245    OMX_AUDIO_AACStreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
246    OMX_AUDIO_AACStreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
247    OMX_AUDIO_AACStreamFormatMax = 0x7FFFFFFF
248} OMX_AUDIO_AACSTREAMFORMATTYPE;
249
250
251/** AAC mode type.  Note that the term profile is used with the MPEG-2
252 * standard and the term object type and profile is used with MPEG-4 */
253typedef enum OMX_AUDIO_AACPROFILETYPE{
254  OMX_AUDIO_AACObjectNull = 0,      /**< Null, not used */
255  OMX_AUDIO_AACObjectMain = 1,      /**< AAC Main object */
256  OMX_AUDIO_AACObjectLC,            /**< AAC Low Complexity object (AAC profile) */
257  OMX_AUDIO_AACObjectSSR,           /**< AAC Scalable Sample Rate object */
258  OMX_AUDIO_AACObjectLTP,           /**< AAC Long Term Prediction object */
259  OMX_AUDIO_AACObjectHE,            /**< AAC High Efficiency (object type SBR, HE-AAC profile) */
260  OMX_AUDIO_AACObjectScalable,      /**< AAC Scalable object */
261  OMX_AUDIO_AACObjectERLC = 17,     /**< ER AAC Low Complexity object (Error Resilient AAC-LC) */
262  OMX_AUDIO_AACObjectLD = 23,       /**< AAC Low Delay object (Error Resilient) */
263  OMX_AUDIO_AACObjectHE_PS = 29,    /**< AAC High Efficiency with Parametric Stereo coding (HE-AAC v2, object type PS) */
264  OMX_AUDIO_AACObjectELD = 39,      /** AAC Enhanced Low Delay. NOTE: Pending Khronos standardization **/
265  OMX_AUDIO_AACObjectKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
266  OMX_AUDIO_AACObjectVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
267  OMX_AUDIO_AACObjectMax = 0x7FFFFFFF
268} OMX_AUDIO_AACPROFILETYPE;
269
270
271/** AAC tool usage (for nAACtools in OMX_AUDIO_PARAM_AACPROFILETYPE).
272 * Required for encoder configuration and optional as decoder info output.
273 * For MP3, OMX_AUDIO_CHANNELMODETYPE is sufficient. */
274#define OMX_AUDIO_AACToolNone 0x00000000 /**< no AAC tools allowed (encoder config) or active (decoder info output) */
275#define OMX_AUDIO_AACToolMS   0x00000001 /**< MS: Mid/side joint coding tool allowed or active */
276#define OMX_AUDIO_AACToolIS   0x00000002 /**< IS: Intensity stereo tool allowed or active */
277#define OMX_AUDIO_AACToolTNS  0x00000004 /**< TNS: Temporal Noise Shaping tool allowed or active */
278#define OMX_AUDIO_AACToolPNS  0x00000008 /**< PNS: MPEG-4 Perceptual Noise substitution tool allowed or active */
279#define OMX_AUDIO_AACToolLTP  0x00000010 /**< LTP: MPEG-4 Long Term Prediction tool allowed or active */
280#define OMX_AUDIO_AACToolAll  0x7FFFFFFF /**< all AAC tools allowed or active (*/
281
282/** MPEG-4 AAC error resilience (ER) tool usage (for nAACERtools in OMX_AUDIO_PARAM_AACPROFILETYPE).
283 * Required for ER encoder configuration and optional as decoder info output */
284#define OMX_AUDIO_AACERNone  0x00000000  /**< no AAC ER tools allowed/used */
285#define OMX_AUDIO_AACERVCB11 0x00000001  /**< VCB11: Virtual Code Books for AAC section data */
286#define OMX_AUDIO_AACERRVLC  0x00000002  /**< RVLC: Reversible Variable Length Coding */
287#define OMX_AUDIO_AACERHCR   0x00000004  /**< HCR: Huffman Codeword Reordering */
288#define OMX_AUDIO_AACERAll   0x7FFFFFFF  /**< all AAC ER tools allowed/used */
289
290
291/** AAC params */
292typedef struct OMX_AUDIO_PARAM_AACPROFILETYPE {
293    OMX_U32 nSize;                 /**< Size of this structure, in Bytes */
294    OMX_VERSIONTYPE nVersion;      /**< OMX specification version information */
295    OMX_U32 nPortIndex;            /**< Port that this structure applies to */
296    OMX_U32 nChannels;             /**< Number of channels */
297    OMX_U32 nSampleRate;           /**< Sampling rate of the source data.  Use 0 for
298                                        variable or unknown sampling rate. */
299    OMX_U32 nBitRate;              /**< Bit rate of the input data.  Use 0 for variable
300                                        rate or unknown bit rates */
301    OMX_U32 nAudioBandWidth;       /**< Audio band width (in Hz) to which an encoder should
302                                        limit the audio signal. Use 0 to let encoder decide */
303    OMX_U32 nFrameLength;          /**< Frame length (in audio samples per channel) of the codec.
304                                        Can be 1024 or 960 (AAC-LC), 2048 (HE-AAC), 480 or 512 (AAC-LD).
305                                        Use 0 to let encoder decide */
306    OMX_U32 nAACtools;             /**< AAC tool usage */
307    OMX_U32 nAACERtools;           /**< MPEG-4 AAC error resilience tool usage */
308    OMX_AUDIO_AACPROFILETYPE eAACProfile;   /**< AAC profile enumeration */
309    OMX_AUDIO_AACSTREAMFORMATTYPE eAACStreamFormat; /**< AAC stream format enumeration */
310    OMX_AUDIO_CHANNELMODETYPE eChannelMode;   /**< Channel mode enumeration */
311} OMX_AUDIO_PARAM_AACPROFILETYPE;
312
313
314/** VORBIS params */
315typedef struct OMX_AUDIO_PARAM_VORBISTYPE {
316    OMX_U32 nSize;            /**< size of the structure in bytes */
317    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
318    OMX_U32 nPortIndex;       /**< port that this structure applies to */
319    OMX_U32 nChannels;        /**< Number of channels */
320    OMX_U32 nBitRate;         /**< Bit rate of the encoded data data.  Use 0 for variable
321                                   rate or unknown bit rates. Encoding is set to the
322                                   bitrate closest to specified  value (in bps) */
323    OMX_U32 nMinBitRate;      /**< Sets minimum bitrate (in bps). */
324    OMX_U32 nMaxBitRate;      /**< Sets maximum bitrate (in bps). */
325
326    OMX_U32 nSampleRate;      /**< Sampling rate of the source data.  Use 0 for
327                                   variable or unknown sampling rate. */
328    OMX_U32 nAudioBandWidth;  /**< Audio band width (in Hz) to which an encoder should
329                                   limit the audio signal. Use 0 to let encoder decide */
330    OMX_S32 nQuality;		  /**< Sets encoding quality to n, between -1 (low) and 10 (high).
331                                   In the default mode of operation, teh quality level is 3.
332                                   Normal quality range is 0 - 10. */
333    OMX_BOOL bManaged;		  /**< Set  bitrate  management  mode. This turns off the
334                                   normal VBR encoding, but allows hard or soft bitrate
335                                   constraints to be enforced by the encoder. This mode can
336                                   be slower, and may also be lower quality. It is
337                                   primarily useful for streaming. */
338    OMX_BOOL bDownmix;		  /**< Downmix input from stereo to mono (has no effect on
339                                   non-stereo streams). Useful for lower-bitrate encoding. */
340} OMX_AUDIO_PARAM_VORBISTYPE;
341
342
343/** WMA Version */
344typedef enum OMX_AUDIO_WMAFORMATTYPE {
345  OMX_AUDIO_WMAFormatUnused = 0, /**< format unused or unknown */
346  OMX_AUDIO_WMAFormat7,          /**< Windows Media Audio format 7 */
347  OMX_AUDIO_WMAFormat8,          /**< Windows Media Audio format 8 */
348  OMX_AUDIO_WMAFormat9,          /**< Windows Media Audio format 9 */
349  OMX_AUDIO_WMAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
350  OMX_AUDIO_WMAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
351  OMX_AUDIO_WMAFormatMax = 0x7FFFFFFF
352} OMX_AUDIO_WMAFORMATTYPE;
353
354
355/** WMA Profile */
356typedef enum OMX_AUDIO_WMAPROFILETYPE {
357  OMX_AUDIO_WMAProfileUnused = 0,  /**< profile unused or unknown */
358  OMX_AUDIO_WMAProfileL1,          /**< Windows Media audio version 9 profile L1 */
359  OMX_AUDIO_WMAProfileL2,          /**< Windows Media audio version 9 profile L2 */
360  OMX_AUDIO_WMAProfileL3,          /**< Windows Media audio version 9 profile L3 */
361  OMX_AUDIO_WMAProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
362  OMX_AUDIO_WMAProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
363  OMX_AUDIO_WMAProfileMax = 0x7FFFFFFF
364} OMX_AUDIO_WMAPROFILETYPE;
365
366
367/** WMA params */
368typedef struct OMX_AUDIO_PARAM_WMATYPE {
369    OMX_U32 nSize;            /**< size of the structure in bytes */
370    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
371    OMX_U32 nPortIndex;       /**< port that this structure applies to */
372    OMX_U16 nChannels;        /**< Number of channels */
373    OMX_U32 nBitRate;         /**< Bit rate of the input data.  Use 0 for variable
374                                   rate or unknown bit rates */
375    OMX_AUDIO_WMAFORMATTYPE eFormat; /**< Version of WMA stream / data */
376	OMX_AUDIO_WMAPROFILETYPE eProfile;  /**< Profile of WMA stream / data */
377    OMX_U32 nSamplingRate;    /**< Sampling rate of the source data */
378    OMX_U16 nBlockAlign;      /**< is the block alignment, or block size, in bytes of the audio codec */
379    OMX_U16 nEncodeOptions;   /**< WMA Type-specific data */
380    OMX_U32 nSuperBlockAlign; /**< WMA Type-specific data */
381} OMX_AUDIO_PARAM_WMATYPE;
382
383/**
384 * RealAudio format
385 */
386typedef enum OMX_AUDIO_RAFORMATTYPE {
387    OMX_AUDIO_RAFormatUnused = 0, /**< Format unused or unknown */
388    OMX_AUDIO_RA8,                /**< RealAudio 8 codec */
389    OMX_AUDIO_RA9,                /**< RealAudio 9 codec */
390    OMX_AUDIO_RA10_AAC,           /**< MPEG-4 AAC codec for bitrates of more than 128kbps */
391    OMX_AUDIO_RA10_CODEC,         /**< RealAudio codec for bitrates less than 128 kbps */
392    OMX_AUDIO_RA10_LOSSLESS,      /**< RealAudio Lossless */
393    OMX_AUDIO_RA10_MULTICHANNEL,  /**< RealAudio Multichannel */
394    OMX_AUDIO_RA10_VOICE,         /**< RealAudio Voice for bitrates below 15 kbps */
395    OMX_AUDIO_RAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
396    OMX_AUDIO_RAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
397    OMX_VIDEO_RAFormatMax = 0x7FFFFFFF
398} OMX_AUDIO_RAFORMATTYPE;
399
400/** RA (Real Audio) params */
401typedef struct OMX_AUDIO_PARAM_RATYPE {
402    OMX_U32 nSize;              /**< Size of this structure, in Bytes */
403    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
404    OMX_U32 nPortIndex;         /**< Port that this structure applies to */
405    OMX_U32 nChannels;          /**< Number of channels */
406    OMX_U32 nSamplingRate;      /**< is the sampling rate of the source data */
407    OMX_U32 nBitsPerFrame;      /**< is the value for bits per frame  */
408    OMX_U32 nSamplePerFrame;    /**< is the value for samples per frame */
409    OMX_U32 nCouplingQuantBits; /**< is the number of coupling quantization bits in the stream */
410    OMX_U32 nCouplingStartRegion;   /**< is the coupling start region in the stream  */
411    OMX_U32 nNumRegions;        /**< is the number of regions value */
412    OMX_AUDIO_RAFORMATTYPE eFormat; /**< is the RealAudio audio format */
413} OMX_AUDIO_PARAM_RATYPE;
414
415
416/** SBC Allocation Method Type */
417typedef enum OMX_AUDIO_SBCALLOCMETHODTYPE {
418  OMX_AUDIO_SBCAllocMethodLoudness, /**< Loudness allocation method */
419  OMX_AUDIO_SBCAllocMethodSNR,      /**< SNR allocation method */
420  OMX_AUDIO_SBCAllocMethodKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
421  OMX_AUDIO_SBCAllocMethodVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
422  OMX_AUDIO_SBCAllocMethodMax = 0x7FFFFFFF
423} OMX_AUDIO_SBCALLOCMETHODTYPE;
424
425
426/** SBC params */
427typedef struct OMX_AUDIO_PARAM_SBCTYPE {
428    OMX_U32 nSize;             /**< size of the structure in bytes */
429    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
430    OMX_U32 nPortIndex;        /**< port that this structure applies to */
431    OMX_U32 nChannels;         /**< Number of channels */
432    OMX_U32 nBitRate;          /**< Bit rate of the input data.  Use 0 for variable
433                                    rate or unknown bit rates */
434    OMX_U32 nSampleRate;       /**< Sampling rate of the source data.  Use 0 for
435                                    variable or unknown sampling rate. */
436    OMX_U32 nBlocks;           /**< Number of blocks */
437    OMX_U32 nSubbands;         /**< Number of subbands */
438    OMX_U32 nBitPool;          /**< Bitpool value */
439    OMX_BOOL bEnableBitrate;   /**< Use bitrate value instead of bitpool */
440    OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */
441    OMX_AUDIO_SBCALLOCMETHODTYPE eSBCAllocType;   /**< SBC Allocation method type */
442} OMX_AUDIO_PARAM_SBCTYPE;
443
444
445/** ADPCM stream format parameters */
446typedef struct OMX_AUDIO_PARAM_ADPCMTYPE {
447    OMX_U32 nSize;              /**< size of the structure in bytes */
448    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
449    OMX_U32 nPortIndex;         /**< port that this structure applies to */
450    OMX_U32 nChannels;          /**< Number of channels in the data stream (not
451                                     necessarily the same as the number of channels
452                                     to be rendered. */
453    OMX_U32 nBitsPerSample;     /**< Number of bits in each sample */
454    OMX_U32 nSampleRate;        /**< Sampling rate of the source data.  Use 0 for
455                                    variable or unknown sampling rate. */
456} OMX_AUDIO_PARAM_ADPCMTYPE;
457
458
459/** G723 rate */
460typedef enum OMX_AUDIO_G723RATE {
461    OMX_AUDIO_G723ModeUnused = 0,  /**< AMRNB Mode unused / unknown */
462    OMX_AUDIO_G723ModeLow,         /**< 5300 bps */
463    OMX_AUDIO_G723ModeHigh,        /**< 6300 bps */
464    OMX_AUDIO_G723ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
465    OMX_AUDIO_G723ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
466    OMX_AUDIO_G723ModeMax = 0x7FFFFFFF
467} OMX_AUDIO_G723RATE;
468
469
470/** G723 - Sample rate must be 8 KHz */
471typedef struct OMX_AUDIO_PARAM_G723TYPE {
472    OMX_U32 nSize;                /**< size of the structure in bytes */
473    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
474    OMX_U32 nPortIndex;           /**< port that this structure applies to */
475    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
476                                       necessarily the same as the number of channels
477                                       to be rendered. */
478    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
479    OMX_AUDIO_G723RATE eBitRate;  /**< todo: Should this be moved to a config? */
480    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
481    OMX_BOOL bPostFilter;         /**< Enable Post Filter */
482} OMX_AUDIO_PARAM_G723TYPE;
483
484
485/** ITU G726 (ADPCM) rate */
486typedef enum OMX_AUDIO_G726MODE {
487    OMX_AUDIO_G726ModeUnused = 0,  /**< G726 Mode unused / unknown */
488    OMX_AUDIO_G726Mode16,          /**< 16 kbps */
489    OMX_AUDIO_G726Mode24,          /**< 24 kbps */
490    OMX_AUDIO_G726Mode32,          /**< 32 kbps, most common rate, also G721 */
491    OMX_AUDIO_G726Mode40,          /**< 40 kbps */
492    OMX_AUDIO_G726ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
493    OMX_AUDIO_G726ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
494    OMX_AUDIO_G726ModeMax = 0x7FFFFFFF
495} OMX_AUDIO_G726MODE;
496
497
498/** G.726 stream format parameters - must be at 8KHz */
499typedef struct OMX_AUDIO_PARAM_G726TYPE {
500    OMX_U32 nSize;              /**< size of the structure in bytes */
501    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
502    OMX_U32 nPortIndex;         /**< port that this structure applies to */
503    OMX_U32 nChannels;          /**< Number of channels in the data stream (not
504                                     necessarily the same as the number of channels
505                                     to be rendered. */
506     OMX_AUDIO_G726MODE eG726Mode;
507} OMX_AUDIO_PARAM_G726TYPE;
508
509
510/** G729 coder type */
511typedef enum OMX_AUDIO_G729TYPE {
512    OMX_AUDIO_G729 = 0,           /**< ITU G.729  encoded data */
513    OMX_AUDIO_G729A,              /**< ITU G.729 annex A  encoded data */
514    OMX_AUDIO_G729B,              /**< ITU G.729 with annex B encoded data */
515    OMX_AUDIO_G729AB,             /**< ITU G.729 annexes A and B encoded data */
516    OMX_AUDIO_G729KhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
517    OMX_AUDIO_G729VendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
518    OMX_AUDIO_G729Max = 0x7FFFFFFF
519} OMX_AUDIO_G729TYPE;
520
521
522/** G729 stream format parameters - fixed 6KHz sample rate */
523typedef struct OMX_AUDIO_PARAM_G729TYPE {
524    OMX_U32 nSize;            /**< size of the structure in bytes */
525    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
526    OMX_U32 nPortIndex;       /**< port that this structure applies to */
527    OMX_U32 nChannels;        /**< Number of channels in the data stream (not
528                                   necessarily the same as the number of channels
529                                   to be rendered. */
530    OMX_BOOL bDTX;            /**< Enable Discontinuous Transmisssion */
531    OMX_AUDIO_G729TYPE eBitType;
532} OMX_AUDIO_PARAM_G729TYPE;
533
534
535/** AMR Frame format */
536typedef enum OMX_AUDIO_AMRFRAMEFORMATTYPE {
537    OMX_AUDIO_AMRFrameFormatConformance = 0,  /**< Frame Format is AMR Conformance
538                                                   (Standard) Format */
539    OMX_AUDIO_AMRFrameFormatIF1,              /**< Frame Format is AMR Interface
540                                                   Format 1 */
541    OMX_AUDIO_AMRFrameFormatIF2,              /**< Frame Format is AMR Interface
542                                                   Format 2*/
543    OMX_AUDIO_AMRFrameFormatFSF,              /**< Frame Format is AMR File Storage
544                                                   Format */
545    OMX_AUDIO_AMRFrameFormatRTPPayload,       /**< Frame Format is AMR Real-Time
546                                                   Transport Protocol Payload Format */
547    OMX_AUDIO_AMRFrameFormatITU,              /**< Frame Format is ITU Format (added at Motorola request) */
548    OMX_AUDIO_AMRFrameFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
549    OMX_AUDIO_AMRFrameFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
550    OMX_AUDIO_AMRFrameFormatMax = 0x7FFFFFFF
551} OMX_AUDIO_AMRFRAMEFORMATTYPE;
552
553
554/** AMR band mode */
555typedef enum OMX_AUDIO_AMRBANDMODETYPE {
556    OMX_AUDIO_AMRBandModeUnused = 0,          /**< AMRNB Mode unused / unknown */
557    OMX_AUDIO_AMRBandModeNB0,                 /**< AMRNB Mode 0 =  4750 bps */
558    OMX_AUDIO_AMRBandModeNB1,                 /**< AMRNB Mode 1 =  5150 bps */
559    OMX_AUDIO_AMRBandModeNB2,                 /**< AMRNB Mode 2 =  5900 bps */
560    OMX_AUDIO_AMRBandModeNB3,                 /**< AMRNB Mode 3 =  6700 bps */
561    OMX_AUDIO_AMRBandModeNB4,                 /**< AMRNB Mode 4 =  7400 bps */
562    OMX_AUDIO_AMRBandModeNB5,                 /**< AMRNB Mode 5 =  7950 bps */
563    OMX_AUDIO_AMRBandModeNB6,                 /**< AMRNB Mode 6 = 10200 bps */
564    OMX_AUDIO_AMRBandModeNB7,                 /**< AMRNB Mode 7 = 12200 bps */
565    OMX_AUDIO_AMRBandModeWB0,                 /**< AMRWB Mode 0 =  6600 bps */
566    OMX_AUDIO_AMRBandModeWB1,                 /**< AMRWB Mode 1 =  8850 bps */
567    OMX_AUDIO_AMRBandModeWB2,                 /**< AMRWB Mode 2 = 12650 bps */
568    OMX_AUDIO_AMRBandModeWB3,                 /**< AMRWB Mode 3 = 14250 bps */
569    OMX_AUDIO_AMRBandModeWB4,                 /**< AMRWB Mode 4 = 15850 bps */
570    OMX_AUDIO_AMRBandModeWB5,                 /**< AMRWB Mode 5 = 18250 bps */
571    OMX_AUDIO_AMRBandModeWB6,                 /**< AMRWB Mode 6 = 19850 bps */
572    OMX_AUDIO_AMRBandModeWB7,                 /**< AMRWB Mode 7 = 23050 bps */
573    OMX_AUDIO_AMRBandModeWB8,                 /**< AMRWB Mode 8 = 23850 bps */
574    OMX_AUDIO_AMRBandModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
575    OMX_AUDIO_AMRBandModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
576    OMX_AUDIO_AMRBandModeMax = 0x7FFFFFFF
577} OMX_AUDIO_AMRBANDMODETYPE;
578
579
580/** AMR Discontinuous Transmission mode */
581typedef enum OMX_AUDIO_AMRDTXMODETYPE {
582    OMX_AUDIO_AMRDTXModeOff = 0,        /**< AMR Discontinuous Transmission Mode is disabled */
583    OMX_AUDIO_AMRDTXModeOnVAD1,         /**< AMR Discontinuous Transmission Mode using
584                                             Voice Activity Detector 1 (VAD1) is enabled */
585    OMX_AUDIO_AMRDTXModeOnVAD2,         /**< AMR Discontinuous Transmission Mode using
586                                             Voice Activity Detector 2 (VAD2) is enabled */
587    OMX_AUDIO_AMRDTXModeOnAuto,         /**< The codec will automatically select between
588                                             Off, VAD1 or VAD2 modes */
589
590    OMX_AUDIO_AMRDTXasEFR,             /**< DTX as EFR instead of AMR standard (3GPP 26.101, frame type =8,9,10) */
591
592    OMX_AUDIO_AMRDTXModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
593    OMX_AUDIO_AMRDTXModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
594    OMX_AUDIO_AMRDTXModeMax = 0x7FFFFFFF
595} OMX_AUDIO_AMRDTXMODETYPE;
596
597
598/** AMR params */
599typedef struct OMX_AUDIO_PARAM_AMRTYPE {
600    OMX_U32 nSize;                          /**< size of the structure in bytes */
601    OMX_VERSIONTYPE nVersion;               /**< OMX specification version information */
602    OMX_U32 nPortIndex;                     /**< port that this structure applies to */
603    OMX_U32 nChannels;                      /**< Number of channels */
604    OMX_U32 nBitRate;                       /**< Bit rate read only field */
605    OMX_AUDIO_AMRBANDMODETYPE eAMRBandMode; /**< AMR Band Mode enumeration */
606    OMX_AUDIO_AMRDTXMODETYPE  eAMRDTXMode;  /**< AMR DTX Mode enumeration */
607    OMX_AUDIO_AMRFRAMEFORMATTYPE eAMRFrameFormat; /**< AMR frame format enumeration */
608} OMX_AUDIO_PARAM_AMRTYPE;
609
610
611/** GSM_FR (ETSI 06.10, 3GPP 46.010) stream format parameters */
612typedef struct OMX_AUDIO_PARAM_GSMFRTYPE {
613    OMX_U32 nSize;            /**< size of the structure in bytes */
614    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
615    OMX_U32 nPortIndex;       /**< port that this structure applies to */
616    OMX_BOOL bDTX;            /**< Enable Discontinuous Transmisssion */
617    OMX_BOOL bHiPassFilter;   /**< Enable High Pass Filter */
618} OMX_AUDIO_PARAM_GSMFRTYPE;
619
620
621/** GSM-HR (ETSI 06.20, 3GPP 46.020) stream format parameters */
622typedef struct OMX_AUDIO_PARAM_GSMHRTYPE {
623    OMX_U32 nSize;            /**< size of the structure in bytes */
624    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
625    OMX_U32 nPortIndex;       /**< port that this structure applies to */
626    OMX_BOOL bDTX;            /**< Enable Discontinuous Transmisssion */
627    OMX_BOOL bHiPassFilter;   /**< Enable High Pass Filter */
628} OMX_AUDIO_PARAM_GSMHRTYPE;
629
630
631/** GSM-EFR (ETSI 06.60, 3GPP 46.060) stream format parameters */
632typedef struct OMX_AUDIO_PARAM_GSMEFRTYPE {
633    OMX_U32 nSize;            /**< size of the structure in bytes */
634    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
635    OMX_U32 nPortIndex;       /**< port that this structure applies to */
636    OMX_BOOL bDTX;            /**< Enable Discontinuous Transmisssion */
637    OMX_BOOL bHiPassFilter;   /**< Enable High Pass Filter */
638} OMX_AUDIO_PARAM_GSMEFRTYPE;
639
640
641/** TDMA FR (TIA/EIA-136-420, VSELP 7.95kbps coder) stream format parameters */
642typedef struct OMX_AUDIO_PARAM_TDMAFRTYPE {
643    OMX_U32 nSize;                /**< size of the structure in bytes */
644    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
645    OMX_U32 nPortIndex;           /**< port that this structure applies to */
646    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
647                                       necessarily the same as the number of channels
648                                       to be rendered. */
649    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
650    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
651} OMX_AUDIO_PARAM_TDMAFRTYPE;
652
653
654/** TDMA EFR (TIA/EIA-136-410, ACELP 7.4kbps coder) stream format parameters */
655typedef struct OMX_AUDIO_PARAM_TDMAEFRTYPE {
656    OMX_U32 nSize;                /**< size of the structure in bytes */
657    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
658    OMX_U32 nPortIndex;           /**< port that this structure applies to */
659    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
660                                       necessarily the same as the number of channels
661                                       to be rendered. */
662    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
663    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
664} OMX_AUDIO_PARAM_TDMAEFRTYPE;
665
666
667/** PDC FR ( RCR-27, VSELP 6.7kbps coder) stream format parameters */
668typedef struct OMX_AUDIO_PARAM_PDCFRTYPE {
669    OMX_U32 nSize;                /**< size of the structure in bytes */
670    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
671    OMX_U32 nPortIndex;           /**< port that this structure applies to */
672    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
673                                       necessarily the same as the number of channels
674                                       to be rendered. */
675    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
676    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
677} OMX_AUDIO_PARAM_PDCFRTYPE;
678
679
680/** PDC EFR ( RCR-27, ACELP 6.7kbps coder) stream format parameters */
681typedef struct OMX_AUDIO_PARAM_PDCEFRTYPE {
682    OMX_U32 nSize;                /**< size of the structure in bytes */
683    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
684    OMX_U32 nPortIndex;           /**< port that this structure applies to */
685    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
686                                       necessarily the same as the number of channels
687                                       to be rendered. */
688    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
689    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
690} OMX_AUDIO_PARAM_PDCEFRTYPE;
691
692/** PDC HR ( RCR-27, PSI-CELP 3.45kbps coder) stream format parameters */
693typedef struct OMX_AUDIO_PARAM_PDCHRTYPE {
694    OMX_U32 nSize;                /**< size of the structure in bytes */
695    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
696    OMX_U32 nPortIndex;           /**< port that this structure applies to */
697    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
698                                       necessarily the same as the number of channels
699                                       to be rendered. */
700    OMX_BOOL bDTX;                /**< Enable Discontinuous Transmisssion */
701    OMX_BOOL bHiPassFilter;       /**< Enable High Pass Filter */
702} OMX_AUDIO_PARAM_PDCHRTYPE;
703
704
705/** CDMA Rate types */
706typedef enum OMX_AUDIO_CDMARATETYPE {
707    OMX_AUDIO_CDMARateBlank = 0,          /**< CDMA encoded frame is blank */
708    OMX_AUDIO_CDMARateFull,               /**< CDMA encoded frame in full rate */
709    OMX_AUDIO_CDMARateHalf,               /**< CDMA encoded frame in half rate */
710    OMX_AUDIO_CDMARateQuarter,            /**< CDMA encoded frame in quarter rate */
711    OMX_AUDIO_CDMARateEighth,             /**< CDMA encoded frame in eighth rate (DTX)*/
712    OMX_AUDIO_CDMARateErasure,            /**< CDMA erasure frame */
713    OMX_AUDIO_CDMARateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
714    OMX_AUDIO_CDMARateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
715    OMX_AUDIO_CDMARateMax = 0x7FFFFFFF
716} OMX_AUDIO_CDMARATETYPE;
717
718
719/** QCELP8 (TIA/EIA-96, up to 8kbps coder) stream format parameters */
720typedef struct OMX_AUDIO_PARAM_QCELP8TYPE {
721    OMX_U32 nSize;                /**< size of the structure in bytes */
722    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
723    OMX_U32 nPortIndex;           /**< port that this structure applies to */
724    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
725                                       necessarily the same as the number of channels
726                                       to be rendered. */
727    OMX_U32 nBitRate;             /**< Bit rate of the input data.  Use 0 for variable
728                                       rate or unknown bit rates */
729    OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */
730    OMX_U32 nMinBitRate;          /**< minmal rate for the encoder = 1,2,3,4, default = 1 */
731    OMX_U32 nMaxBitRate;          /**< maximal rate for the encoder = 1,2,3,4, default = 4 */
732} OMX_AUDIO_PARAM_QCELP8TYPE;
733
734
735/** QCELP13 ( CDMA, EIA/TIA-733, 13.3kbps coder) stream format parameters */
736typedef struct OMX_AUDIO_PARAM_QCELP13TYPE {
737    OMX_U32 nSize;                /**< size of the structure in bytes */
738    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
739    OMX_U32 nPortIndex;           /**< port that this structure applies to */
740    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
741                                       necessarily the same as the number of channels
742                                       to be rendered. */
743    OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */
744    OMX_U32 nMinBitRate;          /**< minmal rate for the encoder = 1,2,3,4, default = 1 */
745    OMX_U32 nMaxBitRate;          /**< maximal rate for the encoder = 1,2,3,4, default = 4 */
746} OMX_AUDIO_PARAM_QCELP13TYPE;
747
748
749/** EVRC ( CDMA, EIA/TIA-127, RCELP up to 8.55kbps coder) stream format parameters */
750typedef struct OMX_AUDIO_PARAM_EVRCTYPE {
751    OMX_U32 nSize;                /**< size of the structure in bytes */
752    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
753    OMX_U32 nPortIndex;           /**< port that this structure applies to */
754    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
755                                       necessarily the same as the number of channels
756                                       to be rendered. */
757    OMX_AUDIO_CDMARATETYPE eCDMARate; /**< actual Frame rate */
758    OMX_BOOL bRATE_REDUCon;       /**< RATE_REDUCtion is requested for this frame */
759    OMX_U32 nMinBitRate;          /**< minmal rate for the encoder = 1,2,3,4, default = 1 */
760    OMX_U32 nMaxBitRate;          /**< maximal rate for the encoder = 1,2,3,4, default = 4 */
761    OMX_BOOL bHiPassFilter;       /**< Enable encoder's High Pass Filter */
762    OMX_BOOL bNoiseSuppressor;    /**< Enable encoder's noise suppressor pre-processing */
763    OMX_BOOL bPostFilter;         /**< Enable decoder's post Filter */
764} OMX_AUDIO_PARAM_EVRCTYPE;
765
766
767/** SMV ( up to 8.55kbps coder) stream format parameters */
768typedef struct OMX_AUDIO_PARAM_SMVTYPE {
769    OMX_U32 nSize;                /**< size of the structure in bytes */
770    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
771    OMX_U32 nPortIndex;           /**< port that this structure applies to */
772    OMX_U32 nChannels;            /**< Number of channels in the data stream (not
773                                       necessarily the same as the number of channels
774                                       to be rendered. */
775    OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */
776    OMX_BOOL bRATE_REDUCon;           /**< RATE_REDUCtion is requested for this frame */
777    OMX_U32 nMinBitRate;          /**< minmal rate for the encoder = 1,2,3,4, default = 1 ??*/
778    OMX_U32 nMaxBitRate;          /**< maximal rate for the encoder = 1,2,3,4, default = 4 ??*/
779    OMX_BOOL bHiPassFilter;       /**< Enable encoder's High Pass Filter ??*/
780    OMX_BOOL bNoiseSuppressor;    /**< Enable encoder's noise suppressor pre-processing */
781    OMX_BOOL bPostFilter;         /**< Enable decoder's post Filter ??*/
782} OMX_AUDIO_PARAM_SMVTYPE;
783
784
785/** MIDI Format
786 * @ingroup midi
787 */
788typedef enum OMX_AUDIO_MIDIFORMATTYPE
789{
790    OMX_AUDIO_MIDIFormatUnknown = 0, /**< MIDI Format unknown or don't care */
791    OMX_AUDIO_MIDIFormatSMF0,        /**< Standard MIDI File Type 0 */
792    OMX_AUDIO_MIDIFormatSMF1,        /**< Standard MIDI File Type 1 */
793    OMX_AUDIO_MIDIFormatSMF2,        /**< Standard MIDI File Type 2 */
794    OMX_AUDIO_MIDIFormatSPMIDI,      /**< SP-MIDI */
795    OMX_AUDIO_MIDIFormatXMF0,        /**< eXtensible Music Format type 0 */
796    OMX_AUDIO_MIDIFormatXMF1,        /**< eXtensible Music Format type 1 */
797    OMX_AUDIO_MIDIFormatMobileXMF,   /**< Mobile XMF (eXtensible Music Format type 2) */
798    OMX_AUDIO_MIDIFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
799    OMX_AUDIO_MIDIFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
800    OMX_AUDIO_MIDIFormatMax = 0x7FFFFFFF
801} OMX_AUDIO_MIDIFORMATTYPE;
802
803
804/** MIDI params
805 * @ingroup midi
806 */
807typedef struct OMX_AUDIO_PARAM_MIDITYPE {
808    OMX_U32 nSize;                 /**< size of the structure in bytes */
809    OMX_VERSIONTYPE nVersion;      /**< OMX specification version information */
810    OMX_U32 nPortIndex;            /**< port that this structure applies to */
811    OMX_U32 nFileSize;             /**< size of the MIDI file in bytes, where the entire
812                                        MIDI file passed in, otherwise if 0x0, the MIDI data
813                                        is merged and streamed (instead of passed as an
814                                        entire MIDI file) */
815    OMX_BU32 sMaxPolyphony;        /**< Specifies the maximum simultaneous polyphonic
816                                        voices. A value of zero indicates that the default
817                                        polyphony of the device is used  */
818    OMX_BOOL bLoadDefaultSound;    /**< Whether to load default sound
819                                        bank at initialization */
820    OMX_AUDIO_MIDIFORMATTYPE eMidiFormat; /**< Version of the MIDI file */
821} OMX_AUDIO_PARAM_MIDITYPE;
822
823
824/** Type of the MIDI sound bank
825 * @ingroup midi
826 */
827typedef enum OMX_AUDIO_MIDISOUNDBANKTYPE {
828    OMX_AUDIO_MIDISoundBankUnused = 0,           /**< unused/unknown soundbank type */
829    OMX_AUDIO_MIDISoundBankDLS1,                 /**< DLS version 1 */
830    OMX_AUDIO_MIDISoundBankDLS2,                 /**< DLS version 2 */
831    OMX_AUDIO_MIDISoundBankMobileDLSBase,        /**< Mobile DLS, using the base functionality */
832    OMX_AUDIO_MIDISoundBankMobileDLSPlusOptions, /**< Mobile DLS, using the specification-defined optional feature set */
833    OMX_AUDIO_MIDISoundBankKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
834    OMX_AUDIO_MIDISoundBankVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
835    OMX_AUDIO_MIDISoundBankMax = 0x7FFFFFFF
836} OMX_AUDIO_MIDISOUNDBANKTYPE;
837
838
839/** Bank Layout describes how bank MSB & LSB are used in the DLS instrument definitions sound bank
840 * @ingroup midi
841 */
842typedef enum OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE {
843   OMX_AUDIO_MIDISoundBankLayoutUnused = 0,   /**< unused/unknown soundbank type */
844   OMX_AUDIO_MIDISoundBankLayoutGM,           /**< GS layout (based on bank MSB 0x00) */
845   OMX_AUDIO_MIDISoundBankLayoutGM2,          /**< General MIDI 2 layout (using MSB 0x78/0x79, LSB 0x00) */
846   OMX_AUDIO_MIDISoundBankLayoutUser,         /**< Does not conform to any bank numbering standards */
847   OMX_AUDIO_MIDISoundBankLayoutKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
848   OMX_AUDIO_MIDISoundBankLayoutVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
849   OMX_AUDIO_MIDISoundBankLayoutMax = 0x7FFFFFFF
850} OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE;
851
852
853/** MIDI params to load/unload user soundbank
854 * @ingroup midi
855 */
856typedef struct OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE {
857    OMX_U32 nSize;            /**< size of the structure in bytes */
858    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
859    OMX_U32 nPortIndex;       /**< port that this structure applies to */
860    OMX_U32 nDLSIndex;        /**< DLS file index to be loaded */
861    OMX_U32 nDLSSize;         /**< Size in bytes */
862    OMX_PTR pDLSData;         /**< Pointer to DLS file data */
863    OMX_AUDIO_MIDISOUNDBANKTYPE eMidiSoundBank;   /**< Midi sound bank type enumeration */
864    OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE eMidiSoundBankLayout; /**< Midi sound bank layout enumeration */
865} OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE;
866
867
868/** Structure for Live MIDI events and MIP messages.
869 * (MIP = Maximum Instantaneous Polyphony; part of the SP-MIDI standard.)
870 * @ingroup midi
871 */
872typedef struct OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE {
873    OMX_U32 nSize;            /**< size of the structure in bytes */
874    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
875    OMX_U32 nPortIndex;       /**< Port that this structure applies to */
876    OMX_U32 nMidiEventSize;   /**< Size of immediate MIDI events or MIP message in bytes  */
877    OMX_U8 nMidiEvents[1];    /**< MIDI event array to be rendered immediately, or an
878                                   array for the MIP message buffer, where the size is
879                                   indicated by nMidiEventSize */
880} OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE;
881
882
883/** MIDI sound bank/ program pair in a given channel
884 * @ingroup midi
885 */
886typedef struct OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE {
887    OMX_U32 nSize;              /**< size of the structure in bytes */
888    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
889    OMX_U32 nPortIndex;         /**< Port that this structure applies to */
890    OMX_U32 nChannel;           /**< Valid channel values range from 1 to 16 */
891    OMX_U16 nIDProgram;         /**< Valid program ID range is 1 to 128 */
892    OMX_U16 nIDSoundBank;       /**< Sound bank ID */
893    OMX_U32 nUserSoundBankIndex;/**< User soundbank index, easier to access soundbanks
894                                     by index if multiple banks are present */
895} OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE;
896
897
898/** MIDI control
899 * @ingroup midi
900 */
901typedef struct OMX_AUDIO_CONFIG_MIDICONTROLTYPE {
902    OMX_U32 nSize;                /**< size of the structure in bytes */
903    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
904    OMX_U32 nPortIndex;           /**< port that this structure applies to */
905    OMX_BS32 sPitchTransposition; /**< Pitch transposition in semitones, stored as Q22.10
906                                       format based on JAVA MMAPI (JSR-135) requirement */
907    OMX_BU32 sPlayBackRate;       /**< Relative playback rate, stored as Q14.17 fixed-point
908                                       number based on JSR-135 requirement */
909    OMX_BU32 sTempo ;             /**< Tempo in beats per minute (BPM), stored as Q22.10
910                                       fixed-point number based on JSR-135 requirement */
911    OMX_U32 nMaxPolyphony;        /**< Specifies the maximum simultaneous polyphonic
912                                       voices. A value of zero indicates that the default
913                                       polyphony of the device is used  */
914    OMX_U32 nNumRepeat;           /**< Number of times to repeat playback */
915    OMX_U32 nStopTime;            /**< Time in milliseconds to indicate when playback
916                                       will stop automatically.  Set to zero if not used */
917    OMX_U16 nChannelMuteMask;     /**< 16 bit mask for channel mute status */
918    OMX_U16 nChannelSoloMask;     /**< 16 bit mask for channel solo status */
919    OMX_U32 nTrack0031MuteMask;   /**< 32 bit mask for track mute status. Note: This is for tracks 0-31 */
920    OMX_U32 nTrack3263MuteMask;   /**< 32 bit mask for track mute status. Note: This is for tracks 32-63 */
921    OMX_U32 nTrack0031SoloMask;   /**< 32 bit mask for track solo status. Note: This is for tracks 0-31 */
922    OMX_U32 nTrack3263SoloMask;   /**< 32 bit mask for track solo status. Note: This is for tracks 32-63 */
923
924} OMX_AUDIO_CONFIG_MIDICONTROLTYPE;
925
926
927/** MIDI Playback States
928 * @ingroup midi
929 */
930typedef enum OMX_AUDIO_MIDIPLAYBACKSTATETYPE {
931  OMX_AUDIO_MIDIPlayBackStateUnknown = 0,      /**< Unknown state or state does not map to
932  													other defined states */
933  OMX_AUDIO_MIDIPlayBackStateClosedEngaged,    /**< No MIDI resource is currently open.
934                                                    The MIDI engine is currently processing
935                                                    MIDI events. */
936  OMX_AUDIO_MIDIPlayBackStateParsing,          /**< A MIDI resource is open and is being
937                                                    primed. The MIDI engine is currently
938                                                    processing MIDI events. */
939  OMX_AUDIO_MIDIPlayBackStateOpenEngaged,      /**< A MIDI resource is open and primed but
940                                                    not playing. The MIDI engine is currently
941                                                    processing MIDI events. The transition to
942                                                    this state is only possible from the
943                                                    OMX_AUDIO_MIDIPlayBackStatePlaying state,
944                                                    when the 'playback head' reaches the end
945                                                    of media data or the playback stops due
946                                                    to stop time set.*/
947  OMX_AUDIO_MIDIPlayBackStatePlaying,          /**< A MIDI resource is open and currently
948                                                    playing. The MIDI engine is currently
949                                                    processing MIDI events.*/
950  OMX_AUDIO_MIDIPlayBackStatePlayingPartially, /**< Best-effort playback due to SP-MIDI/DLS
951                                                    resource constraints */
952  OMX_AUDIO_MIDIPlayBackStatePlayingSilently,  /**< Due to system resource constraints and
953                                                    SP-MIDI content constraints, there is
954                                                    no audible MIDI content during playback
955                                                    currently. The situation may change if
956                                                    resources are freed later.*/
957  OMX_AUDIO_MIDIPlayBackStateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
958  OMX_AUDIO_MIDIPlayBackStateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
959  OMX_AUDIO_MIDIPlayBackStateMax = 0x7FFFFFFF
960} OMX_AUDIO_MIDIPLAYBACKSTATETYPE;
961
962
963/** MIDI status
964 * @ingroup midi
965 */
966typedef struct OMX_AUDIO_CONFIG_MIDISTATUSTYPE {
967    OMX_U32 nSize;              /**< size of the structure in bytes */
968    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
969    OMX_U32 nPortIndex;         /**< port that this structure applies to */
970    OMX_U16 nNumTracks;         /**< Number of MIDI tracks in the file, read only field.
971                                     NOTE: May not return a meaningful value until the entire
972                                     file is parsed and buffered.  */
973    OMX_U32 nDuration;          /**< The length of the currently open MIDI resource
974                                     in milliseconds. NOTE: May not return a meaningful value
975                                     until the entire file is parsed and buffered.  */
976    OMX_U32 nPosition;          /**< Current Position of the MIDI resource being played
977                                     in milliseconds */
978    OMX_BOOL bVibra;            /**< Does Vibra track exist? NOTE: May not return a meaningful
979                                     value until the entire file is parsed and buffered. */
980    OMX_U32 nNumMetaEvents;     /**< Total number of MIDI Meta Events in the currently
981                                     open MIDI resource. NOTE: May not return a meaningful value
982                                     until the entire file is parsed and buffered.  */
983    OMX_U32 nNumActiveVoices;   /**< Number of active voices in the currently playing
984                                     MIDI resource. NOTE: May not return a meaningful value until
985                                     the entire file is parsed and buffered. */
986    OMX_AUDIO_MIDIPLAYBACKSTATETYPE eMIDIPlayBackState;  /**< MIDI playback state enumeration, read only field */
987} OMX_AUDIO_CONFIG_MIDISTATUSTYPE;
988
989
990/** MIDI Meta Event structure one per Meta Event.
991 *  MIDI Meta Events are like audio metadata, except that they are interspersed
992 *  with the MIDI content throughout the file and are not localized in the header.
993 *  As such, it is necessary to retrieve information about these Meta Events from
994 *  the engine, as it encounters these Meta Events within the MIDI content.
995 *  For example, SMF files can have up to 14 types of MIDI Meta Events (copyright,
996 *  author, default tempo, etc.) scattered throughout the file.
997 *  @ingroup midi
998 */
999typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE{
1000    OMX_U32 nSize;            /**< size of the structure in bytes */
1001    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
1002    OMX_U32 nPortIndex;       /**< port that this structure applies to */
1003    OMX_U32 nIndex;           /**< Index of Meta Event */
1004    OMX_U8 nMetaEventType;    /**< Meta Event Type, 7bits (i.e. 0 - 127) */
1005    OMX_U32 nMetaEventSize;   /**< size of the Meta Event in bytes */
1006    OMX_U32 nTrack;           /**< track number for the meta event */
1007    OMX_U32 nPosition;        /**< Position of the meta-event in milliseconds */
1008} OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE;
1009
1010
1011/** MIDI Meta Event Data structure - one per Meta Event.
1012 * @ingroup midi
1013 */
1014typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTDATATYPE{
1015    OMX_U32 nSize;            /**< size of the structure in bytes */
1016    OMX_VERSIONTYPE nVersion; /**< OMX specification version information */
1017    OMX_U32 nPortIndex;       /**< port that this structure applies to */
1018    OMX_U32 nIndex;           /**< Index of Meta Event */
1019    OMX_U32 nMetaEventSize;   /**< size of the Meta Event in bytes */
1020    OMX_U8 nData[1];          /**< array of one or more bytes of meta data
1021                                   as indicated by the nMetaEventSize field */
1022} OMX_AUDIO_CONFIG__MIDIMETAEVENTDATATYPE;
1023
1024
1025/** Audio Volume adjustment for a port */
1026typedef struct OMX_AUDIO_CONFIG_VOLUMETYPE {
1027    OMX_U32 nSize;              /**< size of the structure in bytes */
1028    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
1029    OMX_U32 nPortIndex;         /**< Port index indicating which port to
1030                                     set.  Select the input port to set
1031                                     just that port's volume.  Select the
1032                                     output port to adjust the master
1033                                     volume. */
1034    OMX_BOOL bLinear;           /**< Is the volume to be set in linear (0.100)
1035                                     or logarithmic scale (mB) */
1036    OMX_BS32 sVolume;           /**< Volume linear setting in the 0..100 range, OR
1037                                     Volume logarithmic setting for this port.  The values
1038                                     for volume are in mB (millibels = 1/100 dB) relative
1039                                     to a gain of 1 (e.g. the output is the same as the
1040                                     input level).  Values are in mB from nMax
1041                                     (maximum volume) to nMin mB (typically negative).
1042                                     Since the volume is "voltage"
1043                                     and not a "power", it takes a setting of
1044                                     -600 mB to decrease the volume by 1/2.  If
1045                                     a component cannot accurately set the
1046                                     volume to the requested value, it must
1047                                     set the volume to the closest value BELOW
1048                                     the requested value.  When getting the
1049                                     volume setting, the current actual volume
1050                                     must be returned. */
1051} OMX_AUDIO_CONFIG_VOLUMETYPE;
1052
1053
1054/** Audio Volume adjustment for a channel */
1055typedef struct OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE {
1056    OMX_U32 nSize;              /**< size of the structure in bytes */
1057    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
1058    OMX_U32 nPortIndex;         /**< Port index indicating which port to
1059                                     set.  Select the input port to set
1060                                     just that port's volume.  Select the
1061                                     output port to adjust the master
1062                                     volume. */
1063    OMX_U32 nChannel;           /**< channel to select from 0 to N-1,
1064                                     using OMX_ALL to apply volume settings
1065                                     to all channels */
1066    OMX_BOOL bLinear;           /**< Is the volume to be set in linear (0.100) or
1067                                     logarithmic scale (mB) */
1068    OMX_BS32 sVolume;           /**< Volume linear setting in the 0..100 range, OR
1069                                     Volume logarithmic setting for this port.
1070                                     The values for volume are in mB
1071                                     (millibels = 1/100 dB) relative to a gain
1072                                     of 1 (e.g. the output is the same as the
1073                                     input level).  Values are in mB from nMax
1074                                     (maximum volume) to nMin mB (typically negative).
1075                                     Since the volume is "voltage"
1076                                     and not a "power", it takes a setting of
1077                                     -600 mB to decrease the volume by 1/2.  If
1078                                     a component cannot accurately set the
1079                                     volume to the requested value, it must
1080                                     set the volume to the closest value BELOW
1081                                     the requested value.  When getting the
1082                                     volume setting, the current actual volume
1083                                     must be returned. */
1084    OMX_BOOL bIsMIDI;           /**< TRUE if nChannel refers to a MIDI channel,
1085                                     FALSE otherwise */
1086} OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE;
1087
1088
1089/** Audio balance setting */
1090typedef struct OMX_AUDIO_CONFIG_BALANCETYPE {
1091    OMX_U32 nSize;              /**< size of the structure in bytes */
1092    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
1093    OMX_U32 nPortIndex;         /**< Port index indicating which port to
1094                                     set.  Select the input port to set
1095                                     just that port's balance.  Select the
1096                                     output port to adjust the master
1097                                     balance. */
1098    OMX_S32 nBalance;           /**< balance setting for this port
1099                                     (-100 to 100, where -100 indicates
1100                                     all left, and no right */
1101} OMX_AUDIO_CONFIG_BALANCETYPE;
1102
1103
1104/** Audio Port mute */
1105typedef struct OMX_AUDIO_CONFIG_MUTETYPE {
1106    OMX_U32 nSize;              /**< size of the structure in bytes */
1107    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
1108    OMX_U32 nPortIndex;         /**< Port index indicating which port to
1109                                     set.  Select the input port to set
1110                                     just that port's mute.  Select the
1111                                     output port to adjust the master
1112                                     mute. */
1113    OMX_BOOL bMute;             /**< Mute setting for this port */
1114} OMX_AUDIO_CONFIG_MUTETYPE;
1115
1116
1117/** Audio Channel mute */
1118typedef struct OMX_AUDIO_CONFIG_CHANNELMUTETYPE {
1119    OMX_U32 nSize;              /**< size of the structure in bytes */
1120    OMX_VERSIONTYPE nVersion;   /**< OMX specification version information */
1121    OMX_U32 nPortIndex;         /**< port that this structure applies to */
1122    OMX_U32 nChannel;           /**< channel to select from 0 to N-1,
1123                                     using OMX_ALL to apply mute settings
1124                                     to all channels */
1125    OMX_BOOL bMute;             /**< Mute setting for this channel */
1126    OMX_BOOL bIsMIDI;           /**< TRUE if nChannel refers to a MIDI channel,
1127                                     FALSE otherwise */
1128} OMX_AUDIO_CONFIG_CHANNELMUTETYPE;
1129
1130
1131
1132/** Enable / Disable for loudness control, which boosts bass and to a
1133 *  smaller extent high end frequencies to compensate for hearing
1134 *  ability at the extreme ends of the audio spectrum
1135 */
1136typedef struct OMX_AUDIO_CONFIG_LOUDNESSTYPE {
1137    OMX_U32 nSize;             /**< size of the structure in bytes */
1138    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1139    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1140    OMX_BOOL bLoudness;        /**< Enable/disable for loudness */
1141} OMX_AUDIO_CONFIG_LOUDNESSTYPE;
1142
1143
1144/** Enable / Disable for bass, which controls low frequencies
1145 */
1146typedef struct OMX_AUDIO_CONFIG_BASSTYPE {
1147    OMX_U32 nSize;             /**< size of the structure in bytes */
1148    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1149    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1150    OMX_BOOL bEnable;          /**< Enable/disable for bass control */
1151    OMX_S32 nBass;             /**< bass setting for the port, as a
1152                                    continuous value from -100 to 100
1153                                    (0 means no change in bass level)*/
1154} OMX_AUDIO_CONFIG_BASSTYPE;
1155
1156
1157/** Enable / Disable for treble, which controls high frequencies tones
1158 */
1159typedef struct OMX_AUDIO_CONFIG_TREBLETYPE {
1160    OMX_U32 nSize;             /**< size of the structure in bytes */
1161    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1162    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1163    OMX_BOOL bEnable;          /**< Enable/disable for treble control */
1164    OMX_S32  nTreble;          /**< treble setting for the port, as a
1165                                    continuous value from -100 to 100
1166                                    (0 means no change in treble level) */
1167} OMX_AUDIO_CONFIG_TREBLETYPE;
1168
1169
1170/** An equalizer is typically used for two reasons: to compensate for an
1171 *  sub-optimal frequency response of a system to make it sound more natural
1172 *  or to create intentionally some unnatural coloring to the sound to create
1173 *  an effect.
1174 *  @ingroup effects
1175 */
1176typedef struct OMX_AUDIO_CONFIG_EQUALIZERTYPE {
1177    OMX_U32 nSize;             /**< size of the structure in bytes */
1178    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1179    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1180    OMX_BOOL bEnable;          /**< Enable/disable for equalizer */
1181    OMX_BU32 sBandIndex;       /**< Band number to be set.  Upper Limit is
1182                                    N-1, where N is the number of bands, lower limit is 0 */
1183    OMX_BU32 sCenterFreq;      /**< Center frequecies in Hz.  This is a
1184                                    read only element and is used to determine
1185                                    the lower, center and upper frequency of
1186                                    this band.  */
1187    OMX_BS32 sBandLevel;       /**< band level in millibels */
1188} OMX_AUDIO_CONFIG_EQUALIZERTYPE;
1189
1190
1191/** Stereo widening mode type
1192 * @ingroup effects
1193 */
1194typedef enum OMX_AUDIO_STEREOWIDENINGTYPE {
1195    OMX_AUDIO_StereoWideningHeadphones,    /**< Stereo widening for loudspeakers */
1196    OMX_AUDIO_StereoWideningLoudspeakers,  /**< Stereo widening for closely spaced loudspeakers */
1197    OMX_AUDIO_StereoWideningKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
1198    OMX_AUDIO_StereoWideningVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
1199    OMX_AUDIO_StereoWideningMax = 0x7FFFFFFF
1200} OMX_AUDIO_STEREOWIDENINGTYPE;
1201
1202
1203/** Control for stereo widening, which is a special 2-channel
1204 *  case of the audio virtualizer effect. For example, for 5.1-channel
1205 *  output, it translates to virtual surround sound.
1206 * @ingroup effects
1207 */
1208typedef struct OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE {
1209    OMX_U32 nSize;             /**< size of the structure in bytes */
1210    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1211    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1212    OMX_BOOL bEnable;          /**< Enable/disable for stereo widening control */
1213    OMX_AUDIO_STEREOWIDENINGTYPE eWideningType; /**< Stereo widening algorithm type */
1214    OMX_U32  nStereoWidening;  /**< stereo widening setting for the port,
1215                                    as a continuous value from 0 to 100  */
1216} OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE;
1217
1218
1219/** The chorus effect (or ``choralizer'') is any signal processor which makes
1220 *  one sound source (such as a voice) sound like many such sources singing
1221 *  (or playing) in unison. Since performance in unison is never exact, chorus
1222 *  effects simulate this by making independently modified copies of the input
1223 *  signal. Modifications may include (1) delay, (2) frequency shift, and
1224 *  (3) amplitude modulation.
1225 * @ingroup effects
1226 */
1227typedef struct OMX_AUDIO_CONFIG_CHORUSTYPE {
1228    OMX_U32 nSize;             /**< size of the structure in bytes */
1229    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1230    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1231    OMX_BOOL bEnable;          /**< Enable/disable for chorus */
1232    OMX_BU32 sDelay;           /**< average delay in milliseconds */
1233    OMX_BU32 sModulationRate;  /**< rate of modulation in millihertz */
1234    OMX_U32 nModulationDepth;  /**< depth of modulation as a percentage of
1235                                    delay (i.e. 0 to 100) */
1236    OMX_BU32 nFeedback;        /**< Feedback from chorus output to input in percentage */
1237} OMX_AUDIO_CONFIG_CHORUSTYPE;
1238
1239
1240/** Reverberation is part of the reflected sound that follows the early
1241 *  reflections. In a typical room, this consists of a dense succession of
1242 *  echoes whose energy decays exponentially. The reverberation effect structure
1243 *  as defined here includes both (early) reflections as well as (late) reverberations.
1244 * @ingroup effects
1245 */
1246typedef struct OMX_AUDIO_CONFIG_REVERBERATIONTYPE {
1247    OMX_U32 nSize;                /**< size of the structure in bytes */
1248    OMX_VERSIONTYPE nVersion;     /**< OMX specification version information */
1249    OMX_U32 nPortIndex;           /**< port that this structure applies to */
1250    OMX_BOOL bEnable;             /**< Enable/disable for reverberation control */
1251    OMX_BS32 sRoomLevel;          /**< Intensity level for the whole room effect
1252                                       (i.e. both early reflections and late
1253                                       reverberation) in millibels */
1254    OMX_BS32 sRoomHighFreqLevel;  /**< Attenuation at high frequencies
1255                                       relative to the intensity at low
1256                                       frequencies in millibels */
1257    OMX_BS32 sReflectionsLevel;   /**< Intensity level of early reflections
1258                                       (relative to room value), in millibels */
1259    OMX_BU32 sReflectionsDelay;   /**< Delay time of the first reflection relative
1260                                       to the direct path, in milliseconds */
1261    OMX_BS32 sReverbLevel;        /**< Intensity level of late reverberation
1262                                       relative to room level, in millibels */
1263    OMX_BU32 sReverbDelay;        /**< Time delay from the first early reflection
1264                                       to the beginning of the late reverberation
1265                                       section, in milliseconds */
1266    OMX_BU32 sDecayTime;          /**< Late reverberation decay time at low
1267                                       frequencies, in milliseconds */
1268    OMX_BU32 nDecayHighFreqRatio; /**< Ratio of high frequency decay time relative
1269                                       to low frequency decay time in percent  */
1270    OMX_U32 nDensity;             /**< Modal density in the late reverberation decay,
1271                                       in percent (i.e. 0 - 100) */
1272    OMX_U32 nDiffusion;           /**< Echo density in the late reverberation decay,
1273                                       in percent (i.e. 0 - 100) */
1274    OMX_BU32 sReferenceHighFreq;  /**< Reference high frequency in Hertz. This is
1275                                       the frequency used as the reference for all
1276                                       the high-frequency settings above */
1277
1278} OMX_AUDIO_CONFIG_REVERBERATIONTYPE;
1279
1280
1281/** Possible settings for the Echo Cancelation structure to use
1282 * @ingroup effects
1283 */
1284typedef enum OMX_AUDIO_ECHOCANTYPE {
1285   OMX_AUDIO_EchoCanOff = 0,    /**< Echo Cancellation is disabled */
1286   OMX_AUDIO_EchoCanNormal,     /**< Echo Cancellation normal operation -
1287                                     echo from plastics and face */
1288   OMX_AUDIO_EchoCanHFree,      /**< Echo Cancellation optimized for
1289                                     Hands Free operation */
1290   OMX_AUDIO_EchoCanCarKit,    /**< Echo Cancellation optimized for
1291                                     Car Kit (longer echo) */
1292   OMX_AUDIO_EchoCanKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */
1293   OMX_AUDIO_EchoCanVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */
1294   OMX_AUDIO_EchoCanMax = 0x7FFFFFFF
1295} OMX_AUDIO_ECHOCANTYPE;
1296
1297
1298/** Enable / Disable for echo cancelation, which removes undesired echo's
1299 *  from the audio
1300 * @ingroup effects
1301 */
1302typedef struct OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE {
1303    OMX_U32 nSize;             /**< size of the structure in bytes */
1304    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1305    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1306    OMX_AUDIO_ECHOCANTYPE eEchoCancelation; /**< Echo cancelation settings */
1307} OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE;
1308
1309
1310/** Enable / Disable for noise reduction, which undesired noise from
1311 * the audio
1312 * @ingroup effects
1313 */
1314typedef struct OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE {
1315    OMX_U32 nSize;             /**< size of the structure in bytes */
1316    OMX_VERSIONTYPE nVersion;  /**< OMX specification version information */
1317    OMX_U32 nPortIndex;        /**< port that this structure applies to */
1318    OMX_BOOL bNoiseReduction;  /**< Enable/disable for noise reduction */
1319} OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE;
1320
1321/** @} */
1322
1323#ifdef __cplusplus
1324}
1325#endif /* __cplusplus */
1326
1327#endif
1328/* File EOF */
1329