OMX_Audio.h revision e91cd213d439c076051b1fb02c8bc40c11791dbb
1/* ------------------------------------------------------------------ 2 * Copyright (C) 1998-2009 PacketVideo 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either 13 * express or implied. 14 * See the License for the specific language governing permissions 15 * and limitations under the License. 16 * ------------------------------------------------------------------- 17 */ 18/* 19 * Copyright (c) 2008 The Khronos Group Inc. 20 * 21 * Permission is hereby granted, free of charge, to any person obtaining 22 * a copy of this software and associated documentation files (the 23 * "Software"), to deal in the Software without restriction, including 24 * without limitation the rights to use, copy, modify, merge, publish, 25 * distribute, sublicense, and/or sell copies of the Software, and to 26 * permit persons to whom the Software is furnished to do so, subject 27 * to the following conditions: 28 * The above copyright notice and this permission notice shall be included 29 * in all copies or substantial portions of the Software. 30 * 31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 32 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 34 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY 35 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 36 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 37 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 38 * 39 */ 40 41/** @file OMX_Audio.h - OpenMax IL version 1.1.2 42 * The structures needed by Audio components to exchange 43 * parameters and configuration data with the componenmilts. 44 */ 45 46#ifndef OMX_Audio_h 47#define OMX_Audio_h 48 49#ifdef __cplusplus 50extern "C" { 51#endif /* __cplusplus */ 52 53 54/* Each OMX header must include all required header files to allow the 55 * header to compile without errors. The includes below are required 56 * for this header file to compile successfully 57 */ 58 59#include <OMX_Core.h> 60 61/** @defgroup midi MIDI 62 * @ingroup audio 63 */ 64 65/** @defgroup effects Audio effects 66 * @ingroup audio 67 */ 68 69/** @defgroup audio OpenMAX IL Audio Domain 70 * Structures for OpenMAX IL Audio domain 71 * @{ 72 */ 73 74/** Enumeration used to define the possible audio codings. 75 * If "OMX_AUDIO_CodingUnused" is selected, the coding selection must 76 * be done in a vendor specific way. Since this is for an audio 77 * processing element this enum is relevant. However, for another 78 * type of component other enums would be in this area. 79 */ 80typedef enum OMX_AUDIO_CODINGTYPE { 81 OMX_AUDIO_CodingUnused = 0, /**< Placeholder value when coding is N/A */ 82 OMX_AUDIO_CodingAutoDetect, /**< auto detection of audio format */ 83 OMX_AUDIO_CodingPCM, /**< Any variant of PCM coding */ 84 OMX_AUDIO_CodingADPCM, /**< Any variant of ADPCM encoded data */ 85 OMX_AUDIO_CodingAMR, /**< Any variant of AMR encoded data */ 86 OMX_AUDIO_CodingGSMFR, /**< Any variant of GSM fullrate (i.e. GSM610) */ 87 OMX_AUDIO_CodingGSMEFR, /**< Any variant of GSM Enhanced Fullrate encoded data*/ 88 OMX_AUDIO_CodingGSMHR, /**< Any variant of GSM Halfrate encoded data */ 89 OMX_AUDIO_CodingPDCFR, /**< Any variant of PDC Fullrate encoded data */ 90 OMX_AUDIO_CodingPDCEFR, /**< Any variant of PDC Enhanced Fullrate encoded data */ 91 OMX_AUDIO_CodingPDCHR, /**< Any variant of PDC Halfrate encoded data */ 92 OMX_AUDIO_CodingTDMAFR, /**< Any variant of TDMA Fullrate encoded data (TIA/EIA-136-420) */ 93 OMX_AUDIO_CodingTDMAEFR, /**< Any variant of TDMA Enhanced Fullrate encoded data (TIA/EIA-136-410) */ 94 OMX_AUDIO_CodingQCELP8, /**< Any variant of QCELP 8kbps encoded data */ 95 OMX_AUDIO_CodingQCELP13, /**< Any variant of QCELP 13kbps encoded data */ 96 OMX_AUDIO_CodingEVRC, /**< Any variant of EVRC encoded data */ 97 OMX_AUDIO_CodingSMV, /**< Any variant of SMV encoded data */ 98 OMX_AUDIO_CodingG711, /**< Any variant of G.711 encoded data */ 99 OMX_AUDIO_CodingG723, /**< Any variant of G.723 dot 1 encoded data */ 100 OMX_AUDIO_CodingG726, /**< Any variant of G.726 encoded data */ 101 OMX_AUDIO_CodingG729, /**< Any variant of G.729 encoded data */ 102 OMX_AUDIO_CodingAAC, /**< Any variant of AAC encoded data */ 103 OMX_AUDIO_CodingMP3, /**< Any variant of MP3 encoded data */ 104 OMX_AUDIO_CodingSBC, /**< Any variant of SBC encoded data */ 105 OMX_AUDIO_CodingVORBIS, /**< Any variant of VORBIS encoded data */ 106 OMX_AUDIO_CodingWMA, /**< Any variant of WMA encoded data */ 107 OMX_AUDIO_CodingRA, /**< Any variant of RA encoded data */ 108 OMX_AUDIO_CodingMIDI, /**< Any variant of MIDI encoded data */ 109 OMX_AUDIO_CodingFLAC, /**< Any variant of FLAC encoded data */ 110 OMX_AUDIO_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 111 OMX_AUDIO_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 112 OMX_AUDIO_CodingMax = 0x7FFFFFFF 113} OMX_AUDIO_CODINGTYPE; 114 115 116/** The PortDefinition structure is used to define all of the parameters 117 * necessary for the compliant component to setup an input or an output audio 118 * path. If additional information is needed to define the parameters of the 119 * port (such as frequency), additional structures must be sent such as the 120 * OMX_AUDIO_PARAM_PCMMODETYPE structure to supply the extra parameters for the port. 121 */ 122typedef struct OMX_AUDIO_PORTDEFINITIONTYPE { 123 OMX_STRING cMIMEType; /**< MIME type of data for the port */ 124 OMX_NATIVE_DEVICETYPE pNativeRender; /** < platform specific reference 125 for an output device, 126 otherwise this field is 0 */ 127 OMX_BOOL bFlagErrorConcealment; /**< Turns on error concealment if it is 128 supported by the OMX component */ 129 OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this 130 port (e.g. PCM, AMR, MP3, etc) */ 131} OMX_AUDIO_PORTDEFINITIONTYPE; 132 133 134/** Port format parameter. This structure is used to enumerate 135 * the various data input/output format supported by the port. 136 */ 137typedef struct OMX_AUDIO_PARAM_PORTFORMATTYPE { 138 OMX_U32 nSize; /**< size of the structure in bytes */ 139 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 140 OMX_U32 nPortIndex; /**< Indicates which port to set */ 141 OMX_U32 nIndex; /**< Indicates the enumeration index for the format from 0x0 to N-1 */ 142 OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this port (e.g. PCM, AMR, MP3, etc) */ 143} OMX_AUDIO_PARAM_PORTFORMATTYPE; 144 145 146/** PCM mode type */ 147typedef enum OMX_AUDIO_PCMMODETYPE { 148 OMX_AUDIO_PCMModeLinear = 0, /**< Linear PCM encoded data */ 149 OMX_AUDIO_PCMModeALaw, /**< A law PCM encoded data (G.711) */ 150 OMX_AUDIO_PCMModeMULaw, /**< Mu law PCM encoded data (G.711) */ 151 OMX_AUDIO_PCMModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 152 OMX_AUDIO_PCMModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 153 OMX_AUDIO_PCMModeMax = 0x7FFFFFFF 154} OMX_AUDIO_PCMMODETYPE; 155 156 157typedef enum OMX_AUDIO_CHANNELTYPE { 158 OMX_AUDIO_ChannelNone = 0x0, /**< Unused or empty */ 159 OMX_AUDIO_ChannelLF = 0x1, /**< Left front */ 160 OMX_AUDIO_ChannelRF = 0x2, /**< Right front */ 161 OMX_AUDIO_ChannelCF = 0x3, /**< Center front */ 162 OMX_AUDIO_ChannelLS = 0x4, /**< Left surround */ 163 OMX_AUDIO_ChannelRS = 0x5, /**< Right surround */ 164 OMX_AUDIO_ChannelLFE = 0x6, /**< Low frequency effects */ 165 OMX_AUDIO_ChannelCS = 0x7, /**< Back surround */ 166 OMX_AUDIO_ChannelLR = 0x8, /**< Left rear. */ 167 OMX_AUDIO_ChannelRR = 0x9, /**< Right rear. */ 168 OMX_AUDIO_ChannelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 169 OMX_AUDIO_ChannelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 170 OMX_AUDIO_ChannelMax = 0x7FFFFFFF 171} OMX_AUDIO_CHANNELTYPE; 172 173#define OMX_AUDIO_MAXCHANNELS 16 /**< maximum number distinct audio channels that a buffer may contain */ 174#define OMX_MIN_PCMPAYLOAD_MSEC 5 /**< Minimum audio buffer payload size for uncompressed (PCM) audio */ 175 176/** PCM format description */ 177typedef struct OMX_AUDIO_PARAM_PCMMODETYPE { 178 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 179 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 180 OMX_U32 nPortIndex; /**< port that this structure applies to */ 181 OMX_U32 nChannels; /**< Number of channels (e.g. 2 for stereo) */ 182 OMX_NUMERICALDATATYPE eNumData; /**< indicates PCM data as signed or unsigned */ 183 OMX_ENDIANTYPE eEndian; /**< indicates PCM data as little or big endian */ 184 OMX_BOOL bInterleaved; /**< True for normal interleaved data; false for 185 non-interleaved data (e.g. block data) */ 186 OMX_U32 nBitPerSample; /**< Bit per sample */ 187 OMX_U32 nSamplingRate; /**< Sampling rate of the source data. Use 0 for 188 variable or unknown sampling rate. */ 189 OMX_AUDIO_PCMMODETYPE ePCMMode; /**< PCM mode enumeration */ 190 OMX_AUDIO_CHANNELTYPE eChannelMapping[OMX_AUDIO_MAXCHANNELS]; /**< Slot i contains channel defined by eChannelMap[i] */ 191 192} OMX_AUDIO_PARAM_PCMMODETYPE; 193 194 195/** Audio channel mode. This is used by both AAC and MP3, although the names are more appropriate 196 * for the MP3. For example, JointStereo for MP3 is CouplingChannels for AAC. 197 */ 198typedef enum OMX_AUDIO_CHANNELMODETYPE { 199 OMX_AUDIO_ChannelModeStereo = 0, /**< 2 channels, the bitrate allocation between those 200 two channels changes accordingly to each channel information */ 201 OMX_AUDIO_ChannelModeJointStereo, /**< mode that takes advantage of what is common between 202 2 channels for higher compression gain */ 203 OMX_AUDIO_ChannelModeDual, /**< 2 mono-channels, each channel is encoded with half 204 the bitrate of the overall bitrate */ 205 OMX_AUDIO_ChannelModeMono, /**< Mono channel mode */ 206 OMX_AUDIO_ChannelModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 207 OMX_AUDIO_ChannelModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 208 OMX_AUDIO_ChannelModeMax = 0x7FFFFFFF 209} OMX_AUDIO_CHANNELMODETYPE; 210 211 212typedef enum OMX_AUDIO_MP3STREAMFORMATTYPE { 213 OMX_AUDIO_MP3StreamFormatMP1Layer3 = 0, /**< MP3 Audio MPEG 1 Layer 3 Stream format */ 214 OMX_AUDIO_MP3StreamFormatMP2Layer3, /**< MP3 Audio MPEG 2 Layer 3 Stream format */ 215 OMX_AUDIO_MP3StreamFormatMP2_5Layer3, /**< MP3 Audio MPEG2.5 Layer 3 Stream format */ 216 OMX_AUDIO_MP3StreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 217 OMX_AUDIO_MP3StreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 218 OMX_AUDIO_MP3StreamFormatMax = 0x7FFFFFFF 219} OMX_AUDIO_MP3STREAMFORMATTYPE; 220 221/** MP3 params */ 222typedef struct OMX_AUDIO_PARAM_MP3TYPE { 223 OMX_U32 nSize; /**< size of the structure in bytes */ 224 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 225 OMX_U32 nPortIndex; /**< port that this structure applies to */ 226 OMX_U32 nChannels; /**< Number of channels */ 227 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 228 rate or unknown bit rates */ 229 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 230 variable or unknown sampling rate. */ 231 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 232 limit the audio signal. Use 0 to let encoder decide */ 233 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 234 OMX_AUDIO_MP3STREAMFORMATTYPE eFormat; /**< MP3 stream format */ 235} OMX_AUDIO_PARAM_MP3TYPE; 236 237 238typedef enum OMX_AUDIO_AACSTREAMFORMATTYPE { 239 OMX_AUDIO_AACStreamFormatMP2ADTS = 0, /**< AAC Audio Data Transport Stream 2 format */ 240 OMX_AUDIO_AACStreamFormatMP4ADTS, /**< AAC Audio Data Transport Stream 4 format */ 241 OMX_AUDIO_AACStreamFormatMP4LOAS, /**< AAC Low Overhead Audio Stream format */ 242 OMX_AUDIO_AACStreamFormatMP4LATM, /**< AAC Low overhead Audio Transport Multiplex */ 243 OMX_AUDIO_AACStreamFormatADIF, /**< AAC Audio Data Interchange Format */ 244 OMX_AUDIO_AACStreamFormatMP4FF, /**< AAC inside MPEG-4/ISO File Format */ 245 OMX_AUDIO_AACStreamFormatRAW, /**< AAC Raw Format */ 246 OMX_AUDIO_AACStreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 247 OMX_AUDIO_AACStreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 248 OMX_AUDIO_AACStreamFormatMax = 0x7FFFFFFF 249} OMX_AUDIO_AACSTREAMFORMATTYPE; 250 251 252/** AAC mode type. Note that the term profile is used with the MPEG-2 253 * standard and the term object type and profile is used with MPEG-4 */ 254typedef enum OMX_AUDIO_AACPROFILETYPE{ 255 OMX_AUDIO_AACObjectNull = 0, /**< Null, not used */ 256 OMX_AUDIO_AACObjectMain = 1, /**< AAC Main object */ 257 OMX_AUDIO_AACObjectLC, /**< AAC Low Complexity object (AAC profile) */ 258 OMX_AUDIO_AACObjectSSR, /**< AAC Scalable Sample Rate object */ 259 OMX_AUDIO_AACObjectLTP, /**< AAC Long Term Prediction object */ 260 OMX_AUDIO_AACObjectHE, /**< AAC High Efficiency (object type SBR, HE-AAC profile) */ 261 OMX_AUDIO_AACObjectScalable, /**< AAC Scalable object */ 262 OMX_AUDIO_AACObjectERLC = 17, /**< ER AAC Low Complexity object (Error Resilient AAC-LC) */ 263 OMX_AUDIO_AACObjectLD = 23, /**< AAC Low Delay object (Error Resilient) */ 264 OMX_AUDIO_AACObjectHE_PS = 29, /**< AAC High Efficiency with Parametric Stereo coding (HE-AAC v2, object type PS) */ 265 OMX_AUDIO_AACObjectELD = 39, /** AAC Enhanced Low Delay. NOTE: Pending Khronos standardization **/ 266 OMX_AUDIO_AACObjectKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 267 OMX_AUDIO_AACObjectVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 268 OMX_AUDIO_AACObjectMax = 0x7FFFFFFF 269} OMX_AUDIO_AACPROFILETYPE; 270 271 272/** AAC tool usage (for nAACtools in OMX_AUDIO_PARAM_AACPROFILETYPE). 273 * Required for encoder configuration and optional as decoder info output. 274 * For MP3, OMX_AUDIO_CHANNELMODETYPE is sufficient. */ 275#define OMX_AUDIO_AACToolNone 0x00000000 /**< no AAC tools allowed (encoder config) or active (decoder info output) */ 276#define OMX_AUDIO_AACToolMS 0x00000001 /**< MS: Mid/side joint coding tool allowed or active */ 277#define OMX_AUDIO_AACToolIS 0x00000002 /**< IS: Intensity stereo tool allowed or active */ 278#define OMX_AUDIO_AACToolTNS 0x00000004 /**< TNS: Temporal Noise Shaping tool allowed or active */ 279#define OMX_AUDIO_AACToolPNS 0x00000008 /**< PNS: MPEG-4 Perceptual Noise substitution tool allowed or active */ 280#define OMX_AUDIO_AACToolLTP 0x00000010 /**< LTP: MPEG-4 Long Term Prediction tool allowed or active */ 281#define OMX_AUDIO_AACToolVendor 0x00010000 /**< NOT A KHRONOS VALUE, offset for vendor-specific additions */ 282#define OMX_AUDIO_AACToolAll 0x7FFFFFFF /**< all AAC tools allowed or active (*/ 283 284/** MPEG-4 AAC error resilience (ER) tool usage (for nAACERtools in OMX_AUDIO_PARAM_AACPROFILETYPE). 285 * Required for ER encoder configuration and optional as decoder info output */ 286#define OMX_AUDIO_AACERNone 0x00000000 /**< no AAC ER tools allowed/used */ 287#define OMX_AUDIO_AACERVCB11 0x00000001 /**< VCB11: Virtual Code Books for AAC section data */ 288#define OMX_AUDIO_AACERRVLC 0x00000002 /**< RVLC: Reversible Variable Length Coding */ 289#define OMX_AUDIO_AACERHCR 0x00000004 /**< HCR: Huffman Codeword Reordering */ 290#define OMX_AUDIO_AACERAll 0x7FFFFFFF /**< all AAC ER tools allowed/used */ 291 292 293/** AAC params */ 294typedef struct OMX_AUDIO_PARAM_AACPROFILETYPE { 295 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 296 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 297 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 298 OMX_U32 nChannels; /**< Number of channels */ 299 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 300 variable or unknown sampling rate. */ 301 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 302 rate or unknown bit rates */ 303 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 304 limit the audio signal. Use 0 to let encoder decide */ 305 OMX_U32 nFrameLength; /**< Frame length (in audio samples per channel) of the codec. 306 Can be 1024 or 960 (AAC-LC), 2048 (HE-AAC), 480 or 512 (AAC-LD). 307 Use 0 to let encoder decide */ 308 OMX_U32 nAACtools; /**< AAC tool usage */ 309 OMX_U32 nAACERtools; /**< MPEG-4 AAC error resilience tool usage */ 310 OMX_AUDIO_AACPROFILETYPE eAACProfile; /**< AAC profile enumeration */ 311 OMX_AUDIO_AACSTREAMFORMATTYPE eAACStreamFormat; /**< AAC stream format enumeration */ 312 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 313} OMX_AUDIO_PARAM_AACPROFILETYPE; 314 315 316/** VORBIS params */ 317typedef struct OMX_AUDIO_PARAM_VORBISTYPE { 318 OMX_U32 nSize; /**< size of the structure in bytes */ 319 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 320 OMX_U32 nPortIndex; /**< port that this structure applies to */ 321 OMX_U32 nChannels; /**< Number of channels */ 322 OMX_U32 nBitRate; /**< Bit rate of the encoded data data. Use 0 for variable 323 rate or unknown bit rates. Encoding is set to the 324 bitrate closest to specified value (in bps) */ 325 OMX_U32 nMinBitRate; /**< Sets minimum bitrate (in bps). */ 326 OMX_U32 nMaxBitRate; /**< Sets maximum bitrate (in bps). */ 327 328 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 329 variable or unknown sampling rate. */ 330 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 331 limit the audio signal. Use 0 to let encoder decide */ 332 OMX_S32 nQuality; /**< Sets encoding quality to n, between -1 (low) and 10 (high). 333 In the default mode of operation, teh quality level is 3. 334 Normal quality range is 0 - 10. */ 335 OMX_BOOL bManaged; /**< Set bitrate management mode. This turns off the 336 normal VBR encoding, but allows hard or soft bitrate 337 constraints to be enforced by the encoder. This mode can 338 be slower, and may also be lower quality. It is 339 primarily useful for streaming. */ 340 OMX_BOOL bDownmix; /**< Downmix input from stereo to mono (has no effect on 341 non-stereo streams). Useful for lower-bitrate encoding. */ 342} OMX_AUDIO_PARAM_VORBISTYPE; 343 344 345/** FLAC params */ 346typedef struct OMX_AUDIO_PARAM_FLACTYPE { 347 OMX_U32 nSize; /**< size of the structure in bytes */ 348 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 349 OMX_U32 nPortIndex; /**< port that this structure applies to */ 350 OMX_U32 nChannels; /**< Number of channels */ 351 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 352 unknown sampling rate. */ 353 OMX_U32 nCompressionLevel;/**< FLAC compression level, from 0 (fastest compression) 354 to 8 (highest compression */ 355} OMX_AUDIO_PARAM_FLACTYPE; 356 357 358/** WMA Version */ 359typedef enum OMX_AUDIO_WMAFORMATTYPE { 360 OMX_AUDIO_WMAFormatUnused = 0, /**< format unused or unknown */ 361 OMX_AUDIO_WMAFormat7, /**< Windows Media Audio format 7 */ 362 OMX_AUDIO_WMAFormat8, /**< Windows Media Audio format 8 */ 363 OMX_AUDIO_WMAFormat9, /**< Windows Media Audio format 9 */ 364 OMX_AUDIO_WMAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 365 OMX_AUDIO_WMAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 366 OMX_AUDIO_WMAFormatMax = 0x7FFFFFFF 367} OMX_AUDIO_WMAFORMATTYPE; 368 369 370/** WMA Profile */ 371typedef enum OMX_AUDIO_WMAPROFILETYPE { 372 OMX_AUDIO_WMAProfileUnused = 0, /**< profile unused or unknown */ 373 OMX_AUDIO_WMAProfileL1, /**< Windows Media audio version 9 profile L1 */ 374 OMX_AUDIO_WMAProfileL2, /**< Windows Media audio version 9 profile L2 */ 375 OMX_AUDIO_WMAProfileL3, /**< Windows Media audio version 9 profile L3 */ 376 OMX_AUDIO_WMAProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 377 OMX_AUDIO_WMAProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 378 OMX_AUDIO_WMAProfileMax = 0x7FFFFFFF 379} OMX_AUDIO_WMAPROFILETYPE; 380 381 382/** WMA params */ 383typedef struct OMX_AUDIO_PARAM_WMATYPE { 384 OMX_U32 nSize; /**< size of the structure in bytes */ 385 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 386 OMX_U32 nPortIndex; /**< port that this structure applies to */ 387 OMX_U16 nChannels; /**< Number of channels */ 388 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 389 rate or unknown bit rates */ 390 OMX_AUDIO_WMAFORMATTYPE eFormat; /**< Version of WMA stream / data */ 391 OMX_AUDIO_WMAPROFILETYPE eProfile; /**< Profile of WMA stream / data */ 392 OMX_U32 nSamplingRate; /**< Sampling rate of the source data */ 393 OMX_U16 nBlockAlign; /**< is the block alignment, or block size, in bytes of the audio codec */ 394 OMX_U16 nEncodeOptions; /**< WMA Type-specific data */ 395 OMX_U32 nSuperBlockAlign; /**< WMA Type-specific data */ 396} OMX_AUDIO_PARAM_WMATYPE; 397 398/** 399 * RealAudio format 400 */ 401typedef enum OMX_AUDIO_RAFORMATTYPE { 402 OMX_AUDIO_RAFormatUnused = 0, /**< Format unused or unknown */ 403 OMX_AUDIO_RA8, /**< RealAudio 8 codec */ 404 OMX_AUDIO_RA9, /**< RealAudio 9 codec */ 405 OMX_AUDIO_RA10_AAC, /**< MPEG-4 AAC codec for bitrates of more than 128kbps */ 406 OMX_AUDIO_RA10_CODEC, /**< RealAudio codec for bitrates less than 128 kbps */ 407 OMX_AUDIO_RA10_LOSSLESS, /**< RealAudio Lossless */ 408 OMX_AUDIO_RA10_MULTICHANNEL, /**< RealAudio Multichannel */ 409 OMX_AUDIO_RA10_VOICE, /**< RealAudio Voice for bitrates below 15 kbps */ 410 OMX_AUDIO_RAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 411 OMX_AUDIO_RAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 412 OMX_VIDEO_RAFormatMax = 0x7FFFFFFF 413} OMX_AUDIO_RAFORMATTYPE; 414 415/** RA (Real Audio) params */ 416typedef struct OMX_AUDIO_PARAM_RATYPE { 417 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 418 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 419 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 420 OMX_U32 nChannels; /**< Number of channels */ 421 OMX_U32 nSamplingRate; /**< is the sampling rate of the source data */ 422 OMX_U32 nBitsPerFrame; /**< is the value for bits per frame */ 423 OMX_U32 nSamplePerFrame; /**< is the value for samples per frame */ 424 OMX_U32 nCouplingQuantBits; /**< is the number of coupling quantization bits in the stream */ 425 OMX_U32 nCouplingStartRegion; /**< is the coupling start region in the stream */ 426 OMX_U32 nNumRegions; /**< is the number of regions value */ 427 OMX_AUDIO_RAFORMATTYPE eFormat; /**< is the RealAudio audio format */ 428} OMX_AUDIO_PARAM_RATYPE; 429 430 431/** SBC Allocation Method Type */ 432typedef enum OMX_AUDIO_SBCALLOCMETHODTYPE { 433 OMX_AUDIO_SBCAllocMethodLoudness, /**< Loudness allocation method */ 434 OMX_AUDIO_SBCAllocMethodSNR, /**< SNR allocation method */ 435 OMX_AUDIO_SBCAllocMethodKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 436 OMX_AUDIO_SBCAllocMethodVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 437 OMX_AUDIO_SBCAllocMethodMax = 0x7FFFFFFF 438} OMX_AUDIO_SBCALLOCMETHODTYPE; 439 440 441/** SBC params */ 442typedef struct OMX_AUDIO_PARAM_SBCTYPE { 443 OMX_U32 nSize; /**< size of the structure in bytes */ 444 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 445 OMX_U32 nPortIndex; /**< port that this structure applies to */ 446 OMX_U32 nChannels; /**< Number of channels */ 447 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 448 rate or unknown bit rates */ 449 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 450 variable or unknown sampling rate. */ 451 OMX_U32 nBlocks; /**< Number of blocks */ 452 OMX_U32 nSubbands; /**< Number of subbands */ 453 OMX_U32 nBitPool; /**< Bitpool value */ 454 OMX_BOOL bEnableBitrate; /**< Use bitrate value instead of bitpool */ 455 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 456 OMX_AUDIO_SBCALLOCMETHODTYPE eSBCAllocType; /**< SBC Allocation method type */ 457} OMX_AUDIO_PARAM_SBCTYPE; 458 459 460/** ADPCM stream format parameters */ 461typedef struct OMX_AUDIO_PARAM_ADPCMTYPE { 462 OMX_U32 nSize; /**< size of the structure in bytes */ 463 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 464 OMX_U32 nPortIndex; /**< port that this structure applies to */ 465 OMX_U32 nChannels; /**< Number of channels in the data stream (not 466 necessarily the same as the number of channels 467 to be rendered. */ 468 OMX_U32 nBitsPerSample; /**< Number of bits in each sample */ 469 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 470 variable or unknown sampling rate. */ 471} OMX_AUDIO_PARAM_ADPCMTYPE; 472 473 474/** G723 rate */ 475typedef enum OMX_AUDIO_G723RATE { 476 OMX_AUDIO_G723ModeUnused = 0, /**< AMRNB Mode unused / unknown */ 477 OMX_AUDIO_G723ModeLow, /**< 5300 bps */ 478 OMX_AUDIO_G723ModeHigh, /**< 6300 bps */ 479 OMX_AUDIO_G723ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 480 OMX_AUDIO_G723ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 481 OMX_AUDIO_G723ModeMax = 0x7FFFFFFF 482} OMX_AUDIO_G723RATE; 483 484 485/** G723 - Sample rate must be 8 KHz */ 486typedef struct OMX_AUDIO_PARAM_G723TYPE { 487 OMX_U32 nSize; /**< size of the structure in bytes */ 488 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 489 OMX_U32 nPortIndex; /**< port that this structure applies to */ 490 OMX_U32 nChannels; /**< Number of channels in the data stream (not 491 necessarily the same as the number of channels 492 to be rendered. */ 493 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 494 OMX_AUDIO_G723RATE eBitRate; /**< todo: Should this be moved to a config? */ 495 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 496 OMX_BOOL bPostFilter; /**< Enable Post Filter */ 497} OMX_AUDIO_PARAM_G723TYPE; 498 499 500/** ITU G726 (ADPCM) rate */ 501typedef enum OMX_AUDIO_G726MODE { 502 OMX_AUDIO_G726ModeUnused = 0, /**< G726 Mode unused / unknown */ 503 OMX_AUDIO_G726Mode16, /**< 16 kbps */ 504 OMX_AUDIO_G726Mode24, /**< 24 kbps */ 505 OMX_AUDIO_G726Mode32, /**< 32 kbps, most common rate, also G721 */ 506 OMX_AUDIO_G726Mode40, /**< 40 kbps */ 507 OMX_AUDIO_G726ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 508 OMX_AUDIO_G726ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 509 OMX_AUDIO_G726ModeMax = 0x7FFFFFFF 510} OMX_AUDIO_G726MODE; 511 512 513/** G.726 stream format parameters - must be at 8KHz */ 514typedef struct OMX_AUDIO_PARAM_G726TYPE { 515 OMX_U32 nSize; /**< size of the structure in bytes */ 516 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 517 OMX_U32 nPortIndex; /**< port that this structure applies to */ 518 OMX_U32 nChannels; /**< Number of channels in the data stream (not 519 necessarily the same as the number of channels 520 to be rendered. */ 521 OMX_AUDIO_G726MODE eG726Mode; 522} OMX_AUDIO_PARAM_G726TYPE; 523 524 525/** G729 coder type */ 526typedef enum OMX_AUDIO_G729TYPE { 527 OMX_AUDIO_G729 = 0, /**< ITU G.729 encoded data */ 528 OMX_AUDIO_G729A, /**< ITU G.729 annex A encoded data */ 529 OMX_AUDIO_G729B, /**< ITU G.729 with annex B encoded data */ 530 OMX_AUDIO_G729AB, /**< ITU G.729 annexes A and B encoded data */ 531 OMX_AUDIO_G729KhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 532 OMX_AUDIO_G729VendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 533 OMX_AUDIO_G729Max = 0x7FFFFFFF 534} OMX_AUDIO_G729TYPE; 535 536 537/** G729 stream format parameters - fixed 6KHz sample rate */ 538typedef struct OMX_AUDIO_PARAM_G729TYPE { 539 OMX_U32 nSize; /**< size of the structure in bytes */ 540 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 541 OMX_U32 nPortIndex; /**< port that this structure applies to */ 542 OMX_U32 nChannels; /**< Number of channels in the data stream (not 543 necessarily the same as the number of channels 544 to be rendered. */ 545 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 546 OMX_AUDIO_G729TYPE eBitType; 547} OMX_AUDIO_PARAM_G729TYPE; 548 549 550/** AMR Frame format */ 551typedef enum OMX_AUDIO_AMRFRAMEFORMATTYPE { 552 OMX_AUDIO_AMRFrameFormatConformance = 0, /**< Frame Format is AMR Conformance 553 (Standard) Format */ 554 OMX_AUDIO_AMRFrameFormatIF1, /**< Frame Format is AMR Interface 555 Format 1 */ 556 OMX_AUDIO_AMRFrameFormatIF2, /**< Frame Format is AMR Interface 557 Format 2*/ 558 OMX_AUDIO_AMRFrameFormatFSF, /**< Frame Format is AMR File Storage 559 Format */ 560 OMX_AUDIO_AMRFrameFormatRTPPayload, /**< Frame Format is AMR Real-Time 561 Transport Protocol Payload Format */ 562 OMX_AUDIO_AMRFrameFormatITU, /**< Frame Format is ITU Format (added at Motorola request) */ 563 OMX_AUDIO_AMRFrameFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 564 OMX_AUDIO_AMRFrameFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 565 OMX_AUDIO_AMRFrameFormatMax = 0x7FFFFFFF 566} OMX_AUDIO_AMRFRAMEFORMATTYPE; 567 568 569/** AMR band mode */ 570typedef enum OMX_AUDIO_AMRBANDMODETYPE { 571 OMX_AUDIO_AMRBandModeUnused = 0, /**< AMRNB Mode unused / unknown */ 572 OMX_AUDIO_AMRBandModeNB0, /**< AMRNB Mode 0 = 4750 bps */ 573 OMX_AUDIO_AMRBandModeNB1, /**< AMRNB Mode 1 = 5150 bps */ 574 OMX_AUDIO_AMRBandModeNB2, /**< AMRNB Mode 2 = 5900 bps */ 575 OMX_AUDIO_AMRBandModeNB3, /**< AMRNB Mode 3 = 6700 bps */ 576 OMX_AUDIO_AMRBandModeNB4, /**< AMRNB Mode 4 = 7400 bps */ 577 OMX_AUDIO_AMRBandModeNB5, /**< AMRNB Mode 5 = 7950 bps */ 578 OMX_AUDIO_AMRBandModeNB6, /**< AMRNB Mode 6 = 10200 bps */ 579 OMX_AUDIO_AMRBandModeNB7, /**< AMRNB Mode 7 = 12200 bps */ 580 OMX_AUDIO_AMRBandModeWB0, /**< AMRWB Mode 0 = 6600 bps */ 581 OMX_AUDIO_AMRBandModeWB1, /**< AMRWB Mode 1 = 8850 bps */ 582 OMX_AUDIO_AMRBandModeWB2, /**< AMRWB Mode 2 = 12650 bps */ 583 OMX_AUDIO_AMRBandModeWB3, /**< AMRWB Mode 3 = 14250 bps */ 584 OMX_AUDIO_AMRBandModeWB4, /**< AMRWB Mode 4 = 15850 bps */ 585 OMX_AUDIO_AMRBandModeWB5, /**< AMRWB Mode 5 = 18250 bps */ 586 OMX_AUDIO_AMRBandModeWB6, /**< AMRWB Mode 6 = 19850 bps */ 587 OMX_AUDIO_AMRBandModeWB7, /**< AMRWB Mode 7 = 23050 bps */ 588 OMX_AUDIO_AMRBandModeWB8, /**< AMRWB Mode 8 = 23850 bps */ 589 OMX_AUDIO_AMRBandModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 590 OMX_AUDIO_AMRBandModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 591 OMX_AUDIO_AMRBandModeMax = 0x7FFFFFFF 592} OMX_AUDIO_AMRBANDMODETYPE; 593 594 595/** AMR Discontinuous Transmission mode */ 596typedef enum OMX_AUDIO_AMRDTXMODETYPE { 597 OMX_AUDIO_AMRDTXModeOff = 0, /**< AMR Discontinuous Transmission Mode is disabled */ 598 OMX_AUDIO_AMRDTXModeOnVAD1, /**< AMR Discontinuous Transmission Mode using 599 Voice Activity Detector 1 (VAD1) is enabled */ 600 OMX_AUDIO_AMRDTXModeOnVAD2, /**< AMR Discontinuous Transmission Mode using 601 Voice Activity Detector 2 (VAD2) is enabled */ 602 OMX_AUDIO_AMRDTXModeOnAuto, /**< The codec will automatically select between 603 Off, VAD1 or VAD2 modes */ 604 605 OMX_AUDIO_AMRDTXasEFR, /**< DTX as EFR instead of AMR standard (3GPP 26.101, frame type =8,9,10) */ 606 607 OMX_AUDIO_AMRDTXModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 608 OMX_AUDIO_AMRDTXModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 609 OMX_AUDIO_AMRDTXModeMax = 0x7FFFFFFF 610} OMX_AUDIO_AMRDTXMODETYPE; 611 612 613/** AMR params */ 614typedef struct OMX_AUDIO_PARAM_AMRTYPE { 615 OMX_U32 nSize; /**< size of the structure in bytes */ 616 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 617 OMX_U32 nPortIndex; /**< port that this structure applies to */ 618 OMX_U32 nChannels; /**< Number of channels */ 619 OMX_U32 nBitRate; /**< Bit rate read only field */ 620 OMX_AUDIO_AMRBANDMODETYPE eAMRBandMode; /**< AMR Band Mode enumeration */ 621 OMX_AUDIO_AMRDTXMODETYPE eAMRDTXMode; /**< AMR DTX Mode enumeration */ 622 OMX_AUDIO_AMRFRAMEFORMATTYPE eAMRFrameFormat; /**< AMR frame format enumeration */ 623} OMX_AUDIO_PARAM_AMRTYPE; 624 625 626/** GSM_FR (ETSI 06.10, 3GPP 46.010) stream format parameters */ 627typedef struct OMX_AUDIO_PARAM_GSMFRTYPE { 628 OMX_U32 nSize; /**< size of the structure in bytes */ 629 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 630 OMX_U32 nPortIndex; /**< port that this structure applies to */ 631 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 632 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 633} OMX_AUDIO_PARAM_GSMFRTYPE; 634 635 636/** GSM-HR (ETSI 06.20, 3GPP 46.020) stream format parameters */ 637typedef struct OMX_AUDIO_PARAM_GSMHRTYPE { 638 OMX_U32 nSize; /**< size of the structure in bytes */ 639 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 640 OMX_U32 nPortIndex; /**< port that this structure applies to */ 641 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 642 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 643} OMX_AUDIO_PARAM_GSMHRTYPE; 644 645 646/** GSM-EFR (ETSI 06.60, 3GPP 46.060) stream format parameters */ 647typedef struct OMX_AUDIO_PARAM_GSMEFRTYPE { 648 OMX_U32 nSize; /**< size of the structure in bytes */ 649 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 650 OMX_U32 nPortIndex; /**< port that this structure applies to */ 651 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 652 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 653} OMX_AUDIO_PARAM_GSMEFRTYPE; 654 655 656/** TDMA FR (TIA/EIA-136-420, VSELP 7.95kbps coder) stream format parameters */ 657typedef struct OMX_AUDIO_PARAM_TDMAFRTYPE { 658 OMX_U32 nSize; /**< size of the structure in bytes */ 659 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 660 OMX_U32 nPortIndex; /**< port that this structure applies to */ 661 OMX_U32 nChannels; /**< Number of channels in the data stream (not 662 necessarily the same as the number of channels 663 to be rendered. */ 664 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 665 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 666} OMX_AUDIO_PARAM_TDMAFRTYPE; 667 668 669/** TDMA EFR (TIA/EIA-136-410, ACELP 7.4kbps coder) stream format parameters */ 670typedef struct OMX_AUDIO_PARAM_TDMAEFRTYPE { 671 OMX_U32 nSize; /**< size of the structure in bytes */ 672 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 673 OMX_U32 nPortIndex; /**< port that this structure applies to */ 674 OMX_U32 nChannels; /**< Number of channels in the data stream (not 675 necessarily the same as the number of channels 676 to be rendered. */ 677 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 678 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 679} OMX_AUDIO_PARAM_TDMAEFRTYPE; 680 681 682/** PDC FR ( RCR-27, VSELP 6.7kbps coder) stream format parameters */ 683typedef struct OMX_AUDIO_PARAM_PDCFRTYPE { 684 OMX_U32 nSize; /**< size of the structure in bytes */ 685 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 686 OMX_U32 nPortIndex; /**< port that this structure applies to */ 687 OMX_U32 nChannels; /**< Number of channels in the data stream (not 688 necessarily the same as the number of channels 689 to be rendered. */ 690 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 691 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 692} OMX_AUDIO_PARAM_PDCFRTYPE; 693 694 695/** PDC EFR ( RCR-27, ACELP 6.7kbps coder) stream format parameters */ 696typedef struct OMX_AUDIO_PARAM_PDCEFRTYPE { 697 OMX_U32 nSize; /**< size of the structure in bytes */ 698 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 699 OMX_U32 nPortIndex; /**< port that this structure applies to */ 700 OMX_U32 nChannels; /**< Number of channels in the data stream (not 701 necessarily the same as the number of channels 702 to be rendered. */ 703 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 704 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 705} OMX_AUDIO_PARAM_PDCEFRTYPE; 706 707/** PDC HR ( RCR-27, PSI-CELP 3.45kbps coder) stream format parameters */ 708typedef struct OMX_AUDIO_PARAM_PDCHRTYPE { 709 OMX_U32 nSize; /**< size of the structure in bytes */ 710 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 711 OMX_U32 nPortIndex; /**< port that this structure applies to */ 712 OMX_U32 nChannels; /**< Number of channels in the data stream (not 713 necessarily the same as the number of channels 714 to be rendered. */ 715 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 716 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 717} OMX_AUDIO_PARAM_PDCHRTYPE; 718 719 720/** CDMA Rate types */ 721typedef enum OMX_AUDIO_CDMARATETYPE { 722 OMX_AUDIO_CDMARateBlank = 0, /**< CDMA encoded frame is blank */ 723 OMX_AUDIO_CDMARateFull, /**< CDMA encoded frame in full rate */ 724 OMX_AUDIO_CDMARateHalf, /**< CDMA encoded frame in half rate */ 725 OMX_AUDIO_CDMARateQuarter, /**< CDMA encoded frame in quarter rate */ 726 OMX_AUDIO_CDMARateEighth, /**< CDMA encoded frame in eighth rate (DTX)*/ 727 OMX_AUDIO_CDMARateErasure, /**< CDMA erasure frame */ 728 OMX_AUDIO_CDMARateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 729 OMX_AUDIO_CDMARateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 730 OMX_AUDIO_CDMARateMax = 0x7FFFFFFF 731} OMX_AUDIO_CDMARATETYPE; 732 733 734/** QCELP8 (TIA/EIA-96, up to 8kbps coder) stream format parameters */ 735typedef struct OMX_AUDIO_PARAM_QCELP8TYPE { 736 OMX_U32 nSize; /**< size of the structure in bytes */ 737 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 738 OMX_U32 nPortIndex; /**< port that this structure applies to */ 739 OMX_U32 nChannels; /**< Number of channels in the data stream (not 740 necessarily the same as the number of channels 741 to be rendered. */ 742 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 743 rate or unknown bit rates */ 744 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 745 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 746 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 747} OMX_AUDIO_PARAM_QCELP8TYPE; 748 749 750/** QCELP13 ( CDMA, EIA/TIA-733, 13.3kbps coder) stream format parameters */ 751typedef struct OMX_AUDIO_PARAM_QCELP13TYPE { 752 OMX_U32 nSize; /**< size of the structure in bytes */ 753 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 754 OMX_U32 nPortIndex; /**< port that this structure applies to */ 755 OMX_U32 nChannels; /**< Number of channels in the data stream (not 756 necessarily the same as the number of channels 757 to be rendered. */ 758 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 759 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 760 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 761} OMX_AUDIO_PARAM_QCELP13TYPE; 762 763 764/** EVRC ( CDMA, EIA/TIA-127, RCELP up to 8.55kbps coder) stream format parameters */ 765typedef struct OMX_AUDIO_PARAM_EVRCTYPE { 766 OMX_U32 nSize; /**< size of the structure in bytes */ 767 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 768 OMX_U32 nPortIndex; /**< port that this structure applies to */ 769 OMX_U32 nChannels; /**< Number of channels in the data stream (not 770 necessarily the same as the number of channels 771 to be rendered. */ 772 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< actual Frame rate */ 773 OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ 774 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 775 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 776 OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter */ 777 OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ 778 OMX_BOOL bPostFilter; /**< Enable decoder's post Filter */ 779} OMX_AUDIO_PARAM_EVRCTYPE; 780 781 782/** SMV ( up to 8.55kbps coder) stream format parameters */ 783typedef struct OMX_AUDIO_PARAM_SMVTYPE { 784 OMX_U32 nSize; /**< size of the structure in bytes */ 785 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 786 OMX_U32 nPortIndex; /**< port that this structure applies to */ 787 OMX_U32 nChannels; /**< Number of channels in the data stream (not 788 necessarily the same as the number of channels 789 to be rendered. */ 790 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 791 OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ 792 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 ??*/ 793 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 ??*/ 794 OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter ??*/ 795 OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ 796 OMX_BOOL bPostFilter; /**< Enable decoder's post Filter ??*/ 797} OMX_AUDIO_PARAM_SMVTYPE; 798 799 800/** MIDI Format 801 * @ingroup midi 802 */ 803typedef enum OMX_AUDIO_MIDIFORMATTYPE 804{ 805 OMX_AUDIO_MIDIFormatUnknown = 0, /**< MIDI Format unknown or don't care */ 806 OMX_AUDIO_MIDIFormatSMF0, /**< Standard MIDI File Type 0 */ 807 OMX_AUDIO_MIDIFormatSMF1, /**< Standard MIDI File Type 1 */ 808 OMX_AUDIO_MIDIFormatSMF2, /**< Standard MIDI File Type 2 */ 809 OMX_AUDIO_MIDIFormatSPMIDI, /**< SP-MIDI */ 810 OMX_AUDIO_MIDIFormatXMF0, /**< eXtensible Music Format type 0 */ 811 OMX_AUDIO_MIDIFormatXMF1, /**< eXtensible Music Format type 1 */ 812 OMX_AUDIO_MIDIFormatMobileXMF, /**< Mobile XMF (eXtensible Music Format type 2) */ 813 OMX_AUDIO_MIDIFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 814 OMX_AUDIO_MIDIFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 815 OMX_AUDIO_MIDIFormatMax = 0x7FFFFFFF 816} OMX_AUDIO_MIDIFORMATTYPE; 817 818 819/** MIDI params 820 * @ingroup midi 821 */ 822typedef struct OMX_AUDIO_PARAM_MIDITYPE { 823 OMX_U32 nSize; /**< size of the structure in bytes */ 824 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 825 OMX_U32 nPortIndex; /**< port that this structure applies to */ 826 OMX_U32 nFileSize; /**< size of the MIDI file in bytes, where the entire 827 MIDI file passed in, otherwise if 0x0, the MIDI data 828 is merged and streamed (instead of passed as an 829 entire MIDI file) */ 830 OMX_BU32 sMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic 831 voices. A value of zero indicates that the default 832 polyphony of the device is used */ 833 OMX_BOOL bLoadDefaultSound; /**< Whether to load default sound 834 bank at initialization */ 835 OMX_AUDIO_MIDIFORMATTYPE eMidiFormat; /**< Version of the MIDI file */ 836} OMX_AUDIO_PARAM_MIDITYPE; 837 838 839/** Type of the MIDI sound bank 840 * @ingroup midi 841 */ 842typedef enum OMX_AUDIO_MIDISOUNDBANKTYPE { 843 OMX_AUDIO_MIDISoundBankUnused = 0, /**< unused/unknown soundbank type */ 844 OMX_AUDIO_MIDISoundBankDLS1, /**< DLS version 1 */ 845 OMX_AUDIO_MIDISoundBankDLS2, /**< DLS version 2 */ 846 OMX_AUDIO_MIDISoundBankMobileDLSBase, /**< Mobile DLS, using the base functionality */ 847 OMX_AUDIO_MIDISoundBankMobileDLSPlusOptions, /**< Mobile DLS, using the specification-defined optional feature set */ 848 OMX_AUDIO_MIDISoundBankKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 849 OMX_AUDIO_MIDISoundBankVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 850 OMX_AUDIO_MIDISoundBankMax = 0x7FFFFFFF 851} OMX_AUDIO_MIDISOUNDBANKTYPE; 852 853 854/** Bank Layout describes how bank MSB & LSB are used in the DLS instrument definitions sound bank 855 * @ingroup midi 856 */ 857typedef enum OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE { 858 OMX_AUDIO_MIDISoundBankLayoutUnused = 0, /**< unused/unknown soundbank type */ 859 OMX_AUDIO_MIDISoundBankLayoutGM, /**< GS layout (based on bank MSB 0x00) */ 860 OMX_AUDIO_MIDISoundBankLayoutGM2, /**< General MIDI 2 layout (using MSB 0x78/0x79, LSB 0x00) */ 861 OMX_AUDIO_MIDISoundBankLayoutUser, /**< Does not conform to any bank numbering standards */ 862 OMX_AUDIO_MIDISoundBankLayoutKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 863 OMX_AUDIO_MIDISoundBankLayoutVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 864 OMX_AUDIO_MIDISoundBankLayoutMax = 0x7FFFFFFF 865} OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE; 866 867 868/** MIDI params to load/unload user soundbank 869 * @ingroup midi 870 */ 871typedef struct OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE { 872 OMX_U32 nSize; /**< size of the structure in bytes */ 873 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 874 OMX_U32 nPortIndex; /**< port that this structure applies to */ 875 OMX_U32 nDLSIndex; /**< DLS file index to be loaded */ 876 OMX_U32 nDLSSize; /**< Size in bytes */ 877 OMX_PTR pDLSData; /**< Pointer to DLS file data */ 878 OMX_AUDIO_MIDISOUNDBANKTYPE eMidiSoundBank; /**< Midi sound bank type enumeration */ 879 OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE eMidiSoundBankLayout; /**< Midi sound bank layout enumeration */ 880} OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE; 881 882 883/** Structure for Live MIDI events and MIP messages. 884 * (MIP = Maximum Instantaneous Polyphony; part of the SP-MIDI standard.) 885 * @ingroup midi 886 */ 887typedef struct OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE { 888 OMX_U32 nSize; /**< size of the structure in bytes */ 889 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 890 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 891 OMX_U32 nMidiEventSize; /**< Size of immediate MIDI events or MIP message in bytes */ 892 OMX_U8 nMidiEvents[1]; /**< MIDI event array to be rendered immediately, or an 893 array for the MIP message buffer, where the size is 894 indicated by nMidiEventSize */ 895} OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE; 896 897 898/** MIDI sound bank/ program pair in a given channel 899 * @ingroup midi 900 */ 901typedef struct OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE { 902 OMX_U32 nSize; /**< size of the structure in bytes */ 903 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 904 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 905 OMX_U32 nChannel; /**< Valid channel values range from 1 to 16 */ 906 OMX_U16 nIDProgram; /**< Valid program ID range is 1 to 128 */ 907 OMX_U16 nIDSoundBank; /**< Sound bank ID */ 908 OMX_U32 nUserSoundBankIndex;/**< User soundbank index, easier to access soundbanks 909 by index if multiple banks are present */ 910} OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE; 911 912 913/** MIDI control 914 * @ingroup midi 915 */ 916typedef struct OMX_AUDIO_CONFIG_MIDICONTROLTYPE { 917 OMX_U32 nSize; /**< size of the structure in bytes */ 918 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 919 OMX_U32 nPortIndex; /**< port that this structure applies to */ 920 OMX_BS32 sPitchTransposition; /**< Pitch transposition in semitones, stored as Q22.10 921 format based on JAVA MMAPI (JSR-135) requirement */ 922 OMX_BU32 sPlayBackRate; /**< Relative playback rate, stored as Q14.17 fixed-point 923 number based on JSR-135 requirement */ 924 OMX_BU32 sTempo ; /**< Tempo in beats per minute (BPM), stored as Q22.10 925 fixed-point number based on JSR-135 requirement */ 926 OMX_U32 nMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic 927 voices. A value of zero indicates that the default 928 polyphony of the device is used */ 929 OMX_U32 nNumRepeat; /**< Number of times to repeat playback */ 930 OMX_U32 nStopTime; /**< Time in milliseconds to indicate when playback 931 will stop automatically. Set to zero if not used */ 932 OMX_U16 nChannelMuteMask; /**< 16 bit mask for channel mute status */ 933 OMX_U16 nChannelSoloMask; /**< 16 bit mask for channel solo status */ 934 OMX_U32 nTrack0031MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 0-31 */ 935 OMX_U32 nTrack3263MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 32-63 */ 936 OMX_U32 nTrack0031SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 0-31 */ 937 OMX_U32 nTrack3263SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 32-63 */ 938 939} OMX_AUDIO_CONFIG_MIDICONTROLTYPE; 940 941 942/** MIDI Playback States 943 * @ingroup midi 944 */ 945typedef enum OMX_AUDIO_MIDIPLAYBACKSTATETYPE { 946 OMX_AUDIO_MIDIPlayBackStateUnknown = 0, /**< Unknown state or state does not map to 947 other defined states */ 948 OMX_AUDIO_MIDIPlayBackStateClosedEngaged, /**< No MIDI resource is currently open. 949 The MIDI engine is currently processing 950 MIDI events. */ 951 OMX_AUDIO_MIDIPlayBackStateParsing, /**< A MIDI resource is open and is being 952 primed. The MIDI engine is currently 953 processing MIDI events. */ 954 OMX_AUDIO_MIDIPlayBackStateOpenEngaged, /**< A MIDI resource is open and primed but 955 not playing. The MIDI engine is currently 956 processing MIDI events. The transition to 957 this state is only possible from the 958 OMX_AUDIO_MIDIPlayBackStatePlaying state, 959 when the 'playback head' reaches the end 960 of media data or the playback stops due 961 to stop time set.*/ 962 OMX_AUDIO_MIDIPlayBackStatePlaying, /**< A MIDI resource is open and currently 963 playing. The MIDI engine is currently 964 processing MIDI events.*/ 965 OMX_AUDIO_MIDIPlayBackStatePlayingPartially, /**< Best-effort playback due to SP-MIDI/DLS 966 resource constraints */ 967 OMX_AUDIO_MIDIPlayBackStatePlayingSilently, /**< Due to system resource constraints and 968 SP-MIDI content constraints, there is 969 no audible MIDI content during playback 970 currently. The situation may change if 971 resources are freed later.*/ 972 OMX_AUDIO_MIDIPlayBackStateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 973 OMX_AUDIO_MIDIPlayBackStateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 974 OMX_AUDIO_MIDIPlayBackStateMax = 0x7FFFFFFF 975} OMX_AUDIO_MIDIPLAYBACKSTATETYPE; 976 977 978/** MIDI status 979 * @ingroup midi 980 */ 981typedef struct OMX_AUDIO_CONFIG_MIDISTATUSTYPE { 982 OMX_U32 nSize; /**< size of the structure in bytes */ 983 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 984 OMX_U32 nPortIndex; /**< port that this structure applies to */ 985 OMX_U16 nNumTracks; /**< Number of MIDI tracks in the file, read only field. 986 NOTE: May not return a meaningful value until the entire 987 file is parsed and buffered. */ 988 OMX_U32 nDuration; /**< The length of the currently open MIDI resource 989 in milliseconds. NOTE: May not return a meaningful value 990 until the entire file is parsed and buffered. */ 991 OMX_U32 nPosition; /**< Current Position of the MIDI resource being played 992 in milliseconds */ 993 OMX_BOOL bVibra; /**< Does Vibra track exist? NOTE: May not return a meaningful 994 value until the entire file is parsed and buffered. */ 995 OMX_U32 nNumMetaEvents; /**< Total number of MIDI Meta Events in the currently 996 open MIDI resource. NOTE: May not return a meaningful value 997 until the entire file is parsed and buffered. */ 998 OMX_U32 nNumActiveVoices; /**< Number of active voices in the currently playing 999 MIDI resource. NOTE: May not return a meaningful value until 1000 the entire file is parsed and buffered. */ 1001 OMX_AUDIO_MIDIPLAYBACKSTATETYPE eMIDIPlayBackState; /**< MIDI playback state enumeration, read only field */ 1002} OMX_AUDIO_CONFIG_MIDISTATUSTYPE; 1003 1004 1005/** MIDI Meta Event structure one per Meta Event. 1006 * MIDI Meta Events are like audio metadata, except that they are interspersed 1007 * with the MIDI content throughout the file and are not localized in the header. 1008 * As such, it is necessary to retrieve information about these Meta Events from 1009 * the engine, as it encounters these Meta Events within the MIDI content. 1010 * For example, SMF files can have up to 14 types of MIDI Meta Events (copyright, 1011 * author, default tempo, etc.) scattered throughout the file. 1012 * @ingroup midi 1013 */ 1014typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE{ 1015 OMX_U32 nSize; /**< size of the structure in bytes */ 1016 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1017 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1018 OMX_U32 nIndex; /**< Index of Meta Event */ 1019 OMX_U8 nMetaEventType; /**< Meta Event Type, 7bits (i.e. 0 - 127) */ 1020 OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ 1021 OMX_U32 nTrack; /**< track number for the meta event */ 1022 OMX_U32 nPosition; /**< Position of the meta-event in milliseconds */ 1023} OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE; 1024 1025 1026/** MIDI Meta Event Data structure - one per Meta Event. 1027 * @ingroup midi 1028 */ 1029typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTDATATYPE{ 1030 OMX_U32 nSize; /**< size of the structure in bytes */ 1031 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1032 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1033 OMX_U32 nIndex; /**< Index of Meta Event */ 1034 OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ 1035 OMX_U8 nData[1]; /**< array of one or more bytes of meta data 1036 as indicated by the nMetaEventSize field */ 1037} OMX_AUDIO_CONFIG__MIDIMETAEVENTDATATYPE; 1038 1039 1040/** Audio Volume adjustment for a port */ 1041typedef struct OMX_AUDIO_CONFIG_VOLUMETYPE { 1042 OMX_U32 nSize; /**< size of the structure in bytes */ 1043 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1044 OMX_U32 nPortIndex; /**< Port index indicating which port to 1045 set. Select the input port to set 1046 just that port's volume. Select the 1047 output port to adjust the master 1048 volume. */ 1049 OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) 1050 or logarithmic scale (mB) */ 1051 OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR 1052 Volume logarithmic setting for this port. The values 1053 for volume are in mB (millibels = 1/100 dB) relative 1054 to a gain of 1 (e.g. the output is the same as the 1055 input level). Values are in mB from nMax 1056 (maximum volume) to nMin mB (typically negative). 1057 Since the volume is "voltage" 1058 and not a "power", it takes a setting of 1059 -600 mB to decrease the volume by 1/2. If 1060 a component cannot accurately set the 1061 volume to the requested value, it must 1062 set the volume to the closest value BELOW 1063 the requested value. When getting the 1064 volume setting, the current actual volume 1065 must be returned. */ 1066} OMX_AUDIO_CONFIG_VOLUMETYPE; 1067 1068 1069/** Audio Volume adjustment for a channel */ 1070typedef struct OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE { 1071 OMX_U32 nSize; /**< size of the structure in bytes */ 1072 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1073 OMX_U32 nPortIndex; /**< Port index indicating which port to 1074 set. Select the input port to set 1075 just that port's volume. Select the 1076 output port to adjust the master 1077 volume. */ 1078 OMX_U32 nChannel; /**< channel to select from 0 to N-1, 1079 using OMX_ALL to apply volume settings 1080 to all channels */ 1081 OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) or 1082 logarithmic scale (mB) */ 1083 OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR 1084 Volume logarithmic setting for this port. 1085 The values for volume are in mB 1086 (millibels = 1/100 dB) relative to a gain 1087 of 1 (e.g. the output is the same as the 1088 input level). Values are in mB from nMax 1089 (maximum volume) to nMin mB (typically negative). 1090 Since the volume is "voltage" 1091 and not a "power", it takes a setting of 1092 -600 mB to decrease the volume by 1/2. If 1093 a component cannot accurately set the 1094 volume to the requested value, it must 1095 set the volume to the closest value BELOW 1096 the requested value. When getting the 1097 volume setting, the current actual volume 1098 must be returned. */ 1099 OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, 1100 FALSE otherwise */ 1101} OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE; 1102 1103 1104/** Audio balance setting */ 1105typedef struct OMX_AUDIO_CONFIG_BALANCETYPE { 1106 OMX_U32 nSize; /**< size of the structure in bytes */ 1107 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1108 OMX_U32 nPortIndex; /**< Port index indicating which port to 1109 set. Select the input port to set 1110 just that port's balance. Select the 1111 output port to adjust the master 1112 balance. */ 1113 OMX_S32 nBalance; /**< balance setting for this port 1114 (-100 to 100, where -100 indicates 1115 all left, and no right */ 1116} OMX_AUDIO_CONFIG_BALANCETYPE; 1117 1118 1119/** Audio Port mute */ 1120typedef struct OMX_AUDIO_CONFIG_MUTETYPE { 1121 OMX_U32 nSize; /**< size of the structure in bytes */ 1122 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1123 OMX_U32 nPortIndex; /**< Port index indicating which port to 1124 set. Select the input port to set 1125 just that port's mute. Select the 1126 output port to adjust the master 1127 mute. */ 1128 OMX_BOOL bMute; /**< Mute setting for this port */ 1129} OMX_AUDIO_CONFIG_MUTETYPE; 1130 1131 1132/** Audio Channel mute */ 1133typedef struct OMX_AUDIO_CONFIG_CHANNELMUTETYPE { 1134 OMX_U32 nSize; /**< size of the structure in bytes */ 1135 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1136 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1137 OMX_U32 nChannel; /**< channel to select from 0 to N-1, 1138 using OMX_ALL to apply mute settings 1139 to all channels */ 1140 OMX_BOOL bMute; /**< Mute setting for this channel */ 1141 OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, 1142 FALSE otherwise */ 1143} OMX_AUDIO_CONFIG_CHANNELMUTETYPE; 1144 1145 1146 1147/** Enable / Disable for loudness control, which boosts bass and to a 1148 * smaller extent high end frequencies to compensate for hearing 1149 * ability at the extreme ends of the audio spectrum 1150 */ 1151typedef struct OMX_AUDIO_CONFIG_LOUDNESSTYPE { 1152 OMX_U32 nSize; /**< size of the structure in bytes */ 1153 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1154 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1155 OMX_BOOL bLoudness; /**< Enable/disable for loudness */ 1156} OMX_AUDIO_CONFIG_LOUDNESSTYPE; 1157 1158 1159/** Enable / Disable for bass, which controls low frequencies 1160 */ 1161typedef struct OMX_AUDIO_CONFIG_BASSTYPE { 1162 OMX_U32 nSize; /**< size of the structure in bytes */ 1163 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1164 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1165 OMX_BOOL bEnable; /**< Enable/disable for bass control */ 1166 OMX_S32 nBass; /**< bass setting for the port, as a 1167 continuous value from -100 to 100 1168 (0 means no change in bass level)*/ 1169} OMX_AUDIO_CONFIG_BASSTYPE; 1170 1171 1172/** Enable / Disable for treble, which controls high frequencies tones 1173 */ 1174typedef struct OMX_AUDIO_CONFIG_TREBLETYPE { 1175 OMX_U32 nSize; /**< size of the structure in bytes */ 1176 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1177 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1178 OMX_BOOL bEnable; /**< Enable/disable for treble control */ 1179 OMX_S32 nTreble; /**< treble setting for the port, as a 1180 continuous value from -100 to 100 1181 (0 means no change in treble level) */ 1182} OMX_AUDIO_CONFIG_TREBLETYPE; 1183 1184 1185/** An equalizer is typically used for two reasons: to compensate for an 1186 * sub-optimal frequency response of a system to make it sound more natural 1187 * or to create intentionally some unnatural coloring to the sound to create 1188 * an effect. 1189 * @ingroup effects 1190 */ 1191typedef struct OMX_AUDIO_CONFIG_EQUALIZERTYPE { 1192 OMX_U32 nSize; /**< size of the structure in bytes */ 1193 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1194 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1195 OMX_BOOL bEnable; /**< Enable/disable for equalizer */ 1196 OMX_BU32 sBandIndex; /**< Band number to be set. Upper Limit is 1197 N-1, where N is the number of bands, lower limit is 0 */ 1198 OMX_BU32 sCenterFreq; /**< Center frequecies in Hz. This is a 1199 read only element and is used to determine 1200 the lower, center and upper frequency of 1201 this band. */ 1202 OMX_BS32 sBandLevel; /**< band level in millibels */ 1203} OMX_AUDIO_CONFIG_EQUALIZERTYPE; 1204 1205 1206/** Stereo widening mode type 1207 * @ingroup effects 1208 */ 1209typedef enum OMX_AUDIO_STEREOWIDENINGTYPE { 1210 OMX_AUDIO_StereoWideningHeadphones, /**< Stereo widening for loudspeakers */ 1211 OMX_AUDIO_StereoWideningLoudspeakers, /**< Stereo widening for closely spaced loudspeakers */ 1212 OMX_AUDIO_StereoWideningKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 1213 OMX_AUDIO_StereoWideningVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 1214 OMX_AUDIO_StereoWideningMax = 0x7FFFFFFF 1215} OMX_AUDIO_STEREOWIDENINGTYPE; 1216 1217 1218/** Control for stereo widening, which is a special 2-channel 1219 * case of the audio virtualizer effect. For example, for 5.1-channel 1220 * output, it translates to virtual surround sound. 1221 * @ingroup effects 1222 */ 1223typedef struct OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE { 1224 OMX_U32 nSize; /**< size of the structure in bytes */ 1225 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1226 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1227 OMX_BOOL bEnable; /**< Enable/disable for stereo widening control */ 1228 OMX_AUDIO_STEREOWIDENINGTYPE eWideningType; /**< Stereo widening algorithm type */ 1229 OMX_U32 nStereoWidening; /**< stereo widening setting for the port, 1230 as a continuous value from 0 to 100 */ 1231} OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE; 1232 1233 1234/** The chorus effect (or ``choralizer'') is any signal processor which makes 1235 * one sound source (such as a voice) sound like many such sources singing 1236 * (or playing) in unison. Since performance in unison is never exact, chorus 1237 * effects simulate this by making independently modified copies of the input 1238 * signal. Modifications may include (1) delay, (2) frequency shift, and 1239 * (3) amplitude modulation. 1240 * @ingroup effects 1241 */ 1242typedef struct OMX_AUDIO_CONFIG_CHORUSTYPE { 1243 OMX_U32 nSize; /**< size of the structure in bytes */ 1244 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1245 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1246 OMX_BOOL bEnable; /**< Enable/disable for chorus */ 1247 OMX_BU32 sDelay; /**< average delay in milliseconds */ 1248 OMX_BU32 sModulationRate; /**< rate of modulation in millihertz */ 1249 OMX_U32 nModulationDepth; /**< depth of modulation as a percentage of 1250 delay (i.e. 0 to 100) */ 1251 OMX_BU32 nFeedback; /**< Feedback from chorus output to input in percentage */ 1252} OMX_AUDIO_CONFIG_CHORUSTYPE; 1253 1254 1255/** Reverberation is part of the reflected sound that follows the early 1256 * reflections. In a typical room, this consists of a dense succession of 1257 * echoes whose energy decays exponentially. The reverberation effect structure 1258 * as defined here includes both (early) reflections as well as (late) reverberations. 1259 * @ingroup effects 1260 */ 1261typedef struct OMX_AUDIO_CONFIG_REVERBERATIONTYPE { 1262 OMX_U32 nSize; /**< size of the structure in bytes */ 1263 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1264 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1265 OMX_BOOL bEnable; /**< Enable/disable for reverberation control */ 1266 OMX_BS32 sRoomLevel; /**< Intensity level for the whole room effect 1267 (i.e. both early reflections and late 1268 reverberation) in millibels */ 1269 OMX_BS32 sRoomHighFreqLevel; /**< Attenuation at high frequencies 1270 relative to the intensity at low 1271 frequencies in millibels */ 1272 OMX_BS32 sReflectionsLevel; /**< Intensity level of early reflections 1273 (relative to room value), in millibels */ 1274 OMX_BU32 sReflectionsDelay; /**< Delay time of the first reflection relative 1275 to the direct path, in milliseconds */ 1276 OMX_BS32 sReverbLevel; /**< Intensity level of late reverberation 1277 relative to room level, in millibels */ 1278 OMX_BU32 sReverbDelay; /**< Time delay from the first early reflection 1279 to the beginning of the late reverberation 1280 section, in milliseconds */ 1281 OMX_BU32 sDecayTime; /**< Late reverberation decay time at low 1282 frequencies, in milliseconds */ 1283 OMX_BU32 nDecayHighFreqRatio; /**< Ratio of high frequency decay time relative 1284 to low frequency decay time in percent */ 1285 OMX_U32 nDensity; /**< Modal density in the late reverberation decay, 1286 in percent (i.e. 0 - 100) */ 1287 OMX_U32 nDiffusion; /**< Echo density in the late reverberation decay, 1288 in percent (i.e. 0 - 100) */ 1289 OMX_BU32 sReferenceHighFreq; /**< Reference high frequency in Hertz. This is 1290 the frequency used as the reference for all 1291 the high-frequency settings above */ 1292 1293} OMX_AUDIO_CONFIG_REVERBERATIONTYPE; 1294 1295 1296/** Possible settings for the Echo Cancelation structure to use 1297 * @ingroup effects 1298 */ 1299typedef enum OMX_AUDIO_ECHOCANTYPE { 1300 OMX_AUDIO_EchoCanOff = 0, /**< Echo Cancellation is disabled */ 1301 OMX_AUDIO_EchoCanNormal, /**< Echo Cancellation normal operation - 1302 echo from plastics and face */ 1303 OMX_AUDIO_EchoCanHFree, /**< Echo Cancellation optimized for 1304 Hands Free operation */ 1305 OMX_AUDIO_EchoCanCarKit, /**< Echo Cancellation optimized for 1306 Car Kit (longer echo) */ 1307 OMX_AUDIO_EchoCanKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 1308 OMX_AUDIO_EchoCanVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 1309 OMX_AUDIO_EchoCanMax = 0x7FFFFFFF 1310} OMX_AUDIO_ECHOCANTYPE; 1311 1312 1313/** Enable / Disable for echo cancelation, which removes undesired echo's 1314 * from the audio 1315 * @ingroup effects 1316 */ 1317typedef struct OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE { 1318 OMX_U32 nSize; /**< size of the structure in bytes */ 1319 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1320 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1321 OMX_AUDIO_ECHOCANTYPE eEchoCancelation; /**< Echo cancelation settings */ 1322} OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE; 1323 1324 1325/** Enable / Disable for noise reduction, which undesired noise from 1326 * the audio 1327 * @ingroup effects 1328 */ 1329typedef struct OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE { 1330 OMX_U32 nSize; /**< size of the structure in bytes */ 1331 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1332 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1333 OMX_BOOL bNoiseReduction; /**< Enable/disable for noise reduction */ 1334} OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE; 1335 1336/** @} */ 1337 1338#ifdef __cplusplus 1339} 1340#endif /* __cplusplus */ 1341 1342#endif 1343/* File EOF */ 1344