/* * Copyright (C) 2013 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.camera2; import android.hardware.camera2.impl.CameraMetadataNative; import java.lang.reflect.Field; import java.lang.reflect.Modifier; import java.util.ArrayList; import java.util.Collections; import java.util.List; /** * The base class for camera controls and information. * *
* This class defines the basic key/value map used for querying for camera * characteristics or capture results, and for setting camera request * parameters. *
* ** All instances of CameraMetadata are immutable. The list of keys with {@link #getKeys()} * never changes, nor do the values returned by any key with {@link #get} throughout * the lifetime of the object. *
* * @see CameraDevice * @see CameraManager * @see CameraCharacteristics **/ public abstract class CameraMetadata { /** * Set a camera metadata field to a value. The field definitions can be * found in {@link CameraCharacteristics}, {@link CaptureResult}, and * {@link CaptureRequest}. * * @param key The metadata field to write. * @param value The value to set the field to, which must be of a matching * type to the key. * * @hide */ protected CameraMetadata() { } /** * Get a camera metadata field value. * *The field definitions can be * found in {@link CameraCharacteristics}, {@link CaptureResult}, and * {@link CaptureRequest}.
* *Querying the value for the same key more than once will return a value * which is equal to the previous queried value.
* * @throws IllegalArgumentException if the key was not valid * * @param key The metadata field to read. * @return The value of that key, or {@code null} if the field is not set. */ public abstractThe list returned is not modifiable, so any attempts to modify it will throw * a {@code UnsupportedOperationException}.
* *All values retrieved by a key from this list with {@link #get} are guaranteed to be * non-{@code null}. Each key is only listed once in the list. The order of the keys * is undefined.
* * @return List of the keys contained in this map. */ public List* Optionally, if {@code instance} is not null, then filter out any keys with null values. *
*/ /*package*/ static ArrayList* Get the tag corresponding to this key. This enables insertion into the * native metadata. *
* *This value is looked up the first time, and cached subsequently.
* * @return The tag numeric value corresponding to the string * * @hide */ public final int getTag() { if (!mHasTag) { mTag = CameraMetadataNative.getTag(mName); mHasTag = true; } return mTag; } /** * @hide */ public final Classandroid.led.transmit control is used
* @see CameraCharacteristics#LED_AVAILABLE_LEDS * @hide */ public static final int LED_AVAILABLE_LEDS_TRANSMIT = 0; // // Enumeration values for CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL // /** * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED = 0; /** * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_FULL = 1; // // Enumeration values for CaptureRequest#COLOR_CORRECTION_MODE // /** *Use the android.colorCorrection.transform matrix * and android.colorCorrection.gains to do color conversion
* @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_TRANSFORM_MATRIX = 0; /** *Must not slow down frame rate relative to raw * bayer output
* @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_FAST = 1; /** *Frame rate may be reduced by high * quality
* @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#CONTROL_AE_ANTIBANDING_MODE // /** * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_OFF = 0; /** * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_50HZ = 1; /** * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_60HZ = 2; /** * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_AUTO = 3; // // Enumeration values for CaptureRequest#CONTROL_AE_MODE // /** *Autoexposure is disabled; sensor.exposureTime, * sensor.sensitivity and sensor.frameDuration are used
* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_OFF = 0; /** *Autoexposure is active, no flash * control
* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON = 1; /** *If autoexposure is active and flash exists, auto * flash control; flash may be fired when precapture * trigger is activated, and for captures for which * captureIntent = STILL_CAPTURE
* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_AUTO_FLASH = 2; /** *If autoexposure is active and flash exists, auto * flash control for precapture trigger and always flash * when captureIntent = STILL_CAPTURE
* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_ALWAYS_FLASH = 3; /** *Optional. Automatic red eye reduction with flash. * If deemed necessary, red eye reduction sequence should * fire when precapture trigger is activated, and final * flash should fire when captureIntent = * STILL_CAPTURE
* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE = 4; // // Enumeration values for CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER // /** *The trigger is idle.
* @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER */ public static final int CONTROL_AE_PRECAPTURE_TRIGGER_IDLE = 0; /** *The precapture metering sequence * must be started. The exact effect of the precapture * trigger depends on the current AE mode and * state.
* @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER */ public static final int CONTROL_AE_PRECAPTURE_TRIGGER_START = 1; // // Enumeration values for CaptureRequest#CONTROL_AF_MODE // /** *The auto-focus routine does not control the lens; * android.lens.focusDistance is controlled by the * application
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_OFF = 0; /** *If lens is not fixed focus.
*Use android.lens.info.minimumFocusDistance to determine if lens * is fixed-focus. In this mode, the lens does not move unless * the autofocus trigger action is called. When that trigger * is activated, AF must transition to ACTIVE_SCAN, then to * the outcome of the scan (FOCUSED or NOT_FOCUSED).
*Triggering AF_CANCEL resets the lens position to default, * and sets the AF state to INACTIVE.
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_AUTO = 1; /** *In this mode, the lens does not move unless the * autofocus trigger action is called.
*When that trigger is activated, AF must transition to * ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or * NOT_FOCUSED). Triggering cancel AF resets the lens * position to default, and sets the AF state to * INACTIVE.
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_MACRO = 2; /** *In this mode, the AF algorithm modifies the lens * position continually to attempt to provide a * constantly-in-focus image stream.
*The focusing behavior should be suitable for good quality * video recording; typically this means slower focus * movement and no overshoots. When the AF trigger is not * involved, the AF algorithm should start in INACTIVE state, * and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED * states as appropriate. When the AF trigger is activated, * the algorithm should immediately transition into * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the * lens position until a cancel AF trigger is received.
*Once cancel is received, the algorithm should transition * back to INACTIVE and resume passive scan. Note that this * behavior is not identical to CONTINUOUS_PICTURE, since an * ongoing PASSIVE_SCAN must immediately be * canceled.
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_CONTINUOUS_VIDEO = 3; /** *In this mode, the AF algorithm modifies the lens * position continually to attempt to provide a * constantly-in-focus image stream.
*The focusing behavior should be suitable for still image * capture; typically this means focusing as fast as * possible. When the AF trigger is not involved, the AF * algorithm should start in INACTIVE state, and then * transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as * appropriate as it attempts to maintain focus. When the AF * trigger is activated, the algorithm should finish its * PASSIVE_SCAN if active, and then transition into * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the * lens position until a cancel AF trigger is received.
*When the AF cancel trigger is activated, the algorithm * should transition back to INACTIVE and then act as if it * has just been started.
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_CONTINUOUS_PICTURE = 4; /** *Extended depth of field (digital focus). AF * trigger is ignored, AF state should always be * INACTIVE.
* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_EDOF = 5; // // Enumeration values for CaptureRequest#CONTROL_AF_TRIGGER // /** *The trigger is idle.
* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_IDLE = 0; /** *Autofocus must trigger now.
* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_START = 1; /** *Autofocus must return to initial * state, and cancel any active trigger.
* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_CANCEL = 2; // // Enumeration values for CaptureRequest#CONTROL_AWB_MODE // /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_OFF = 0; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_AUTO = 1; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_INCANDESCENT = 2; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_FLUORESCENT = 3; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_WARM_FLUORESCENT = 4; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_DAYLIGHT = 5; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_CLOUDY_DAYLIGHT = 6; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_TWILIGHT = 7; /** * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_SHADE = 8; // // Enumeration values for CaptureRequest#CONTROL_CAPTURE_INTENT // /** *This request doesn't fall into the other * categories. Default to preview-like * behavior.
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_CUSTOM = 0; /** *This request is for a preview-like usecase. The * precapture trigger may be used to start off a metering * w/flash sequence
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_PREVIEW = 1; /** *This request is for a still capture-type * usecase.
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_STILL_CAPTURE = 2; /** *This request is for a video recording * usecase.
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_VIDEO_RECORD = 3; /** *This request is for a video snapshot (still * image while recording video) usecase
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT = 4; /** *This request is for a ZSL usecase; the * application will stream full-resolution images and * reprocess one or several later for a final * capture
* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG = 5; // // Enumeration values for CaptureRequest#CONTROL_EFFECT_MODE // /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_OFF = 0; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_MONO = 1; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_NEGATIVE = 2; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_SOLARIZE = 3; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_SEPIA = 4; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_POSTERIZE = 5; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_WHITEBOARD = 6; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_BLACKBOARD = 7; /** * @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_AQUA = 8; // // Enumeration values for CaptureRequest#CONTROL_MODE // /** *Full application control of pipeline. All 3A * routines are disabled, no other settings in * android.control.* have any effect
* @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_OFF = 0; /** *Use settings for each individual 3A routine. * Manual control of capture parameters is disabled. All * controls in android.control.* besides sceneMode take * effect
* @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_AUTO = 1; /** *Use specific scene mode. Enabling this disables * control.aeMode, control.awbMode and control.afMode * controls; the HAL must ignore those settings while * USE_SCENE_MODE is active (except for FACE_PRIORITY * scene mode). Other control entries are still active. * This setting can only be used if availableSceneModes != * UNSUPPORTED
* @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_USE_SCENE_MODE = 2; // // Enumeration values for CaptureRequest#CONTROL_SCENE_MODE // /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_UNSUPPORTED = 0; /** *if face detection support exists Use face * detection data to drive 3A routines. If face detection * statistics are disabled, should still operate correctly * (but not return face detection statistics to the * framework).
*Unlike the other scene modes, aeMode, awbMode, and afMode * remain active when FACE_PRIORITY is set. This is due to * compatibility concerns with the old camera * API
* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_FACE_PRIORITY = 1; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_ACTION = 2; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_PORTRAIT = 3; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_LANDSCAPE = 4; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_NIGHT = 5; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_NIGHT_PORTRAIT = 6; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_THEATRE = 7; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_BEACH = 8; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SNOW = 9; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SUNSET = 10; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_STEADYPHOTO = 11; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_FIREWORKS = 12; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SPORTS = 13; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_PARTY = 14; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_CANDLELIGHT = 15; /** * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_BARCODE = 16; // // Enumeration values for CaptureRequest#EDGE_MODE // /** *No edge enhancement is applied
* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_OFF = 0; /** *Must not slow down frame rate relative to raw * bayer output
* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_FAST = 1; /** *Frame rate may be reduced by high * quality
* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#FLASH_MODE // /** *Do not fire the flash for this * capture
* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_OFF = 0; /** *if android.flash.available is true Fire flash * for this capture based on firingPower, * firingTime.
* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_SINGLE = 1; /** *if android.flash.available is true Flash * continuously on, power set by * firingPower
* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_TORCH = 2; // // Enumeration values for CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE // /** * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE */ public static final int LENS_OPTICAL_STABILIZATION_MODE_OFF = 0; /** * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE */ public static final int LENS_OPTICAL_STABILIZATION_MODE_ON = 1; // // Enumeration values for CaptureRequest#NOISE_REDUCTION_MODE // /** *No noise reduction is applied
* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_OFF = 0; /** *Must not slow down frame rate relative to raw * bayer output
* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_FAST = 1; /** *May slow down frame rate to provide highest * quality
* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#STATISTICS_FACE_DETECT_MODE // /** * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_OFF = 0; /** *Optional Return rectangle and confidence * only
* @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_SIMPLE = 1; /** *Optional Return all face * metadata
* @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_FULL = 2; // // Enumeration values for CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE // /** * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE */ public static final int STATISTICS_LENS_SHADING_MAP_MODE_OFF = 0; /** * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE */ public static final int STATISTICS_LENS_SHADING_MAP_MODE_ON = 1; // // Enumeration values for CaptureRequest#TONEMAP_MODE // /** *Use the tone mapping curve specified in * android.tonemap.curve
* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_CONTRAST_CURVE = 0; /** *Must not slow down frame rate relative to raw * bayer output
* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_FAST = 1; /** *Frame rate may be reduced by high * quality
* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureResult#CONTROL_AE_STATE // /** *AE is off. When a camera device is opened, it starts in * this state.
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_INACTIVE = 0; /** *AE doesn't yet have a good set of control values * for the current scene
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_SEARCHING = 1; /** *AE has a good set of control values for the * current scene
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_CONVERGED = 2; /** *AE has been locked (aeMode = * LOCKED)
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_LOCKED = 3; /** *AE has a good set of control values, but flash * needs to be fired for good quality still * capture
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_FLASH_REQUIRED = 4; /** *AE has been asked to do a precapture sequence * (through the * trigger_action(CAMERA2_TRIGGER_PRECAPTURE_METERING) * call), and is currently executing it. Once PRECAPTURE * completes, AE will transition to CONVERGED or * FLASH_REQUIRED as appropriate
* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_PRECAPTURE = 5; // // Enumeration values for CaptureResult#CONTROL_AF_STATE // /** *AF off or has not yet tried to scan/been asked * to scan. When a camera device is opened, it starts in * this state.
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_INACTIVE = 0; /** *if CONTINUOUS_* modes are supported. AF is * currently doing an AF scan initiated by a continuous * autofocus mode
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_SCAN = 1; /** *if CONTINUOUS_* modes are supported. AF currently * believes it is in focus, but may restart scanning at * any time.
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_FOCUSED = 2; /** *if AUTO or MACRO modes are supported. AF is doing * an AF scan because it was triggered by AF * trigger
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_ACTIVE_SCAN = 3; /** *if any AF mode besides OFF is supported. AF * believes it is focused correctly and is * locked
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_FOCUSED_LOCKED = 4; /** *if any AF mode besides OFF is supported. AF has * failed to focus successfully and is * locked
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_NOT_FOCUSED_LOCKED = 5; /** *if CONTINUOUS_* modes are supported. AF finished a * passive scan without finding focus, and may restart * scanning at any time.
* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_UNFOCUSED = 6; // // Enumeration values for CaptureResult#CONTROL_AWB_STATE // /** *AWB is not in auto mode. When a camera device is opened, it * starts in this state.
* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_INACTIVE = 0; /** *AWB doesn't yet have a good set of control * values for the current scene
* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_SEARCHING = 1; /** *AWB has a good set of control values for the * current scene
* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_CONVERGED = 2; /** *AE has been locked (aeMode = * LOCKED)
* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_LOCKED = 3; // // Enumeration values for CaptureResult#FLASH_STATE // /** *No flash on camera
* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_UNAVAILABLE = 0; /** *if android.flash.available is true Flash is * charging and cannot be fired
* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_CHARGING = 1; /** *if android.flash.available is true Flash is * ready to fire
* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_READY = 2; /** *if android.flash.available is true Flash fired * for this capture
* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_FIRED = 3; // // Enumeration values for CaptureResult#LENS_STATE // /** * @see CaptureResult#LENS_STATE */ public static final int LENS_STATE_STATIONARY = 0; /** * @see CaptureResult#LENS_STATE */ public static final int LENS_STATE_MOVING = 1; // // Enumeration values for CaptureResult#STATISTICS_SCENE_FLICKER // /** * @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_NONE = 0; /** * @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_50HZ = 1; /** * @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_60HZ = 2; /*~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ * End generated code *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~O@*/ }