CaptureRequest.java revision 9e6d1880c288d7d0ddcb651dda88d069f058eced
1/* 2 * Copyright (C) 2013 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17package android.hardware.camera2; 18 19import android.hardware.camera2.impl.CameraMetadataNative; 20import android.os.Parcel; 21import android.os.Parcelable; 22import android.util.Rational; 23import android.view.Surface; 24 25import java.util.Collection; 26import java.util.Collections; 27import java.util.HashSet; 28import java.util.Objects; 29 30 31/** 32 * <p>An immutable package of settings and outputs needed to capture a single 33 * image from the camera device.</p> 34 * 35 * <p>Contains the configuration for the capture hardware (sensor, lens, flash), 36 * the processing pipeline, the control algorithms, and the output buffers. Also 37 * contains the list of target Surfaces to send image data to for this 38 * capture.</p> 39 * 40 * <p>CaptureRequests can be created by using a {@link Builder} instance, 41 * obtained by calling {@link CameraDevice#createCaptureRequest}</p> 42 * 43 * <p>CaptureRequests are given to {@link CameraDevice#capture} or 44 * {@link CameraDevice#setRepeatingRequest} to capture images from a camera.</p> 45 * 46 * <p>Each request can specify a different subset of target Surfaces for the 47 * camera to send the captured data to. All the surfaces used in a request must 48 * be part of the surface list given to the last call to 49 * {@link CameraDevice#configureOutputs}, when the request is submitted to the 50 * camera device.</p> 51 * 52 * <p>For example, a request meant for repeating preview might only include the 53 * Surface for the preview SurfaceView or SurfaceTexture, while a 54 * high-resolution still capture would also include a Surface from a ImageReader 55 * configured for high-resolution JPEG images.</p> 56 * 57 * @see CameraDevice#capture 58 * @see CameraDevice#setRepeatingRequest 59 * @see CameraDevice#createCaptureRequest 60 */ 61public final class CaptureRequest extends CameraMetadata implements Parcelable { 62 63 private final HashSet<Surface> mSurfaceSet; 64 private final CameraMetadataNative mSettings; 65 66 private Object mUserTag; 67 68 /** 69 * Construct empty request. 70 * 71 * Used by Binder to unparcel this object only. 72 */ 73 private CaptureRequest() { 74 mSettings = new CameraMetadataNative(); 75 mSurfaceSet = new HashSet<Surface>(); 76 } 77 78 /** 79 * Clone from source capture request. 80 * 81 * Used by the Builder to create an immutable copy. 82 */ 83 @SuppressWarnings("unchecked") 84 private CaptureRequest(CaptureRequest source) { 85 mSettings = new CameraMetadataNative(source.mSettings); 86 mSurfaceSet = (HashSet<Surface>) source.mSurfaceSet.clone(); 87 mUserTag = source.mUserTag; 88 } 89 90 /** 91 * Take ownership of passed-in settings. 92 * 93 * Used by the Builder to create a mutable CaptureRequest. 94 */ 95 private CaptureRequest(CameraMetadataNative settings) { 96 mSettings = settings; 97 mSurfaceSet = new HashSet<Surface>(); 98 } 99 100 @SuppressWarnings("unchecked") 101 @Override 102 public <T> T get(Key<T> key) { 103 return mSettings.get(key); 104 } 105 106 /** 107 * Retrieve the tag for this request, if any. 108 * 109 * <p>This tag is not used for anything by the camera device, but can be 110 * used by an application to easily identify a CaptureRequest when it is 111 * returned by 112 * {@link CameraDevice.CaptureListener#onCaptureCompleted CaptureListener.onCaptureCompleted} 113 * </p> 114 * 115 * @return the last tag Object set on this request, or {@code null} if 116 * no tag has been set. 117 * @see Builder#setTag 118 */ 119 public Object getTag() { 120 return mUserTag; 121 } 122 123 /** 124 * Determine whether this CaptureRequest is equal to another CaptureRequest. 125 * 126 * <p>A request is considered equal to another is if it's set of key/values is equal, it's 127 * list of output surfaces is equal, and the user tag is equal.</p> 128 * 129 * @param other Another instance of CaptureRequest. 130 * 131 * @return True if the requests are the same, false otherwise. 132 */ 133 @Override 134 public boolean equals(Object other) { 135 return other instanceof CaptureRequest 136 && equals((CaptureRequest)other); 137 } 138 139 private boolean equals(CaptureRequest other) { 140 return other != null 141 && Objects.equals(mUserTag, other.mUserTag) 142 && mSurfaceSet.equals(other.mSurfaceSet) 143 && mSettings.equals(other.mSettings); 144 } 145 146 @Override 147 public int hashCode() { 148 return mSettings.hashCode(); 149 } 150 151 public static final Parcelable.Creator<CaptureRequest> CREATOR = 152 new Parcelable.Creator<CaptureRequest>() { 153 @Override 154 public CaptureRequest createFromParcel(Parcel in) { 155 CaptureRequest request = new CaptureRequest(); 156 request.readFromParcel(in); 157 158 return request; 159 } 160 161 @Override 162 public CaptureRequest[] newArray(int size) { 163 return new CaptureRequest[size]; 164 } 165 }; 166 167 /** 168 * Expand this object from a Parcel. 169 * Hidden since this breaks the immutability of CaptureRequest, but is 170 * needed to receive CaptureRequests with aidl. 171 * 172 * @param in The parcel from which the object should be read 173 * @hide 174 */ 175 private void readFromParcel(Parcel in) { 176 mSettings.readFromParcel(in); 177 178 mSurfaceSet.clear(); 179 180 Parcelable[] parcelableArray = in.readParcelableArray(Surface.class.getClassLoader()); 181 182 if (parcelableArray == null) { 183 return; 184 } 185 186 for (Parcelable p : parcelableArray) { 187 Surface s = (Surface) p; 188 mSurfaceSet.add(s); 189 } 190 } 191 192 @Override 193 public int describeContents() { 194 return 0; 195 } 196 197 @Override 198 public void writeToParcel(Parcel dest, int flags) { 199 mSettings.writeToParcel(dest, flags); 200 dest.writeParcelableArray(mSurfaceSet.toArray(new Surface[mSurfaceSet.size()]), flags); 201 } 202 203 /** 204 * @hide 205 */ 206 public boolean containsTarget(Surface surface) { 207 return mSurfaceSet.contains(surface); 208 } 209 210 /** 211 * @hide 212 */ 213 public Collection<Surface> getTargets() { 214 return Collections.unmodifiableCollection(mSurfaceSet); 215 } 216 217 /** 218 * A builder for capture requests. 219 * 220 * <p>To obtain a builder instance, use the 221 * {@link CameraDevice#createCaptureRequest} method, which initializes the 222 * request fields to one of the templates defined in {@link CameraDevice}. 223 * 224 * @see CameraDevice#createCaptureRequest 225 * @see #TEMPLATE_PREVIEW 226 * @see #TEMPLATE_RECORD 227 * @see #TEMPLATE_STILL_CAPTURE 228 * @see #TEMPLATE_VIDEO_SNAPSHOT 229 * @see #TEMPLATE_MANUAL 230 */ 231 public final static class Builder { 232 233 private final CaptureRequest mRequest; 234 235 /** 236 * Initialize the builder using the template; the request takes 237 * ownership of the template. 238 * 239 * @hide 240 */ 241 public Builder(CameraMetadataNative template) { 242 mRequest = new CaptureRequest(template); 243 } 244 245 /** 246 * <p>Add a surface to the list of targets for this request</p> 247 * 248 * <p>The Surface added must be one of the surfaces included in the most 249 * recent call to {@link CameraDevice#configureOutputs}, when the 250 * request is given to the camera device.</p> 251 * 252 * <p>Adding a target more than once has no effect.</p> 253 * 254 * @param outputTarget Surface to use as an output target for this request 255 */ 256 public void addTarget(Surface outputTarget) { 257 mRequest.mSurfaceSet.add(outputTarget); 258 } 259 260 /** 261 * <p>Remove a surface from the list of targets for this request.</p> 262 * 263 * <p>Removing a target that is not currently added has no effect.</p> 264 * 265 * @param outputTarget Surface to use as an output target for this request 266 */ 267 public void removeTarget(Surface outputTarget) { 268 mRequest.mSurfaceSet.remove(outputTarget); 269 } 270 271 /** 272 * Set a capture request field to a value. The field definitions can be 273 * found in {@link CaptureRequest}. 274 * 275 * @param key The metadata field to write. 276 * @param value The value to set the field to, which must be of a matching 277 * type to the key. 278 */ 279 public <T> void set(Key<T> key, T value) { 280 mRequest.mSettings.set(key, value); 281 } 282 283 /** 284 * Get a capture request field value. The field definitions can be 285 * found in {@link CaptureRequest}. 286 * 287 * @throws IllegalArgumentException if the key was not valid 288 * 289 * @param key The metadata field to read. 290 * @return The value of that key, or {@code null} if the field is not set. 291 */ 292 public <T> T get(Key<T> key) { 293 return mRequest.mSettings.get(key); 294 } 295 296 /** 297 * Set a tag for this request. 298 * 299 * <p>This tag is not used for anything by the camera device, but can be 300 * used by an application to easily identify a CaptureRequest when it is 301 * returned by 302 * {@link CameraDevice.CaptureListener#onCaptureCompleted CaptureListener.onCaptureCompleted} 303 * 304 * @param tag an arbitrary Object to store with this request 305 * @see CaptureRequest#getTag 306 */ 307 public void setTag(Object tag) { 308 mRequest.mUserTag = tag; 309 } 310 311 /** 312 * Build a request using the current target Surfaces and settings. 313 * 314 * @return A new capture request instance, ready for submission to the 315 * camera device. 316 */ 317 public CaptureRequest build() { 318 return new CaptureRequest(mRequest); 319 } 320 321 322 /** 323 * @hide 324 */ 325 public boolean isEmpty() { 326 return mRequest.mSettings.isEmpty(); 327 } 328 329 } 330 331 /*@O~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ 332 * The key entries below this point are generated from metadata 333 * definitions in /system/media/camera/docs. Do not modify by hand or 334 * modify the comment blocks at the start or end. 335 *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~*/ 336 337 338 /** 339 * <p>The mode control selects how the image data is converted from the 340 * sensor's native color into linear sRGB color.</p> 341 * <p>When auto-white balance is enabled with {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, this 342 * control is overridden by the AWB routine. When AWB is disabled, the 343 * application controls how the color mapping is performed.</p> 344 * <p>We define the expected processing pipeline below. For consistency 345 * across devices, this is always the case with TRANSFORM_MATRIX.</p> 346 * <p>When either FULL or HIGH_QUALITY is used, the camera device may 347 * do additional processing but {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} and 348 * {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} will still be provided by the 349 * camera device (in the results) and be roughly correct.</p> 350 * <p>Switching to TRANSFORM_MATRIX and using the data provided from 351 * FAST or HIGH_QUALITY will yield a picture with the same white point 352 * as what was produced by the camera device in the earlier frame.</p> 353 * <p>The expected processing pipeline is as follows:</p> 354 * <p><img alt="White balance processing pipeline" src="../../../../images/camera2/metadata/android.colorCorrection.mode/processing_pipeline.png" /></p> 355 * <p>The white balance is encoded by two values, a 4-channel white-balance 356 * gain vector (applied in the Bayer domain), and a 3x3 color transform 357 * matrix (applied after demosaic).</p> 358 * <p>The 4-channel white-balance gains are defined as:</p> 359 * <pre><code>{@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} = [ R G_even G_odd B ] 360 * </code></pre> 361 * <p>where <code>G_even</code> is the gain for green pixels on even rows of the 362 * output, and <code>G_odd</code> is the gain for green pixels on the odd rows. 363 * These may be identical for a given camera device implementation; if 364 * the camera device does not support a separate gain for even/odd green 365 * channels, it will use the <code>G_even</code> value, and write <code>G_odd</code> equal to 366 * <code>G_even</code> in the output result metadata.</p> 367 * <p>The matrices for color transforms are defined as a 9-entry vector:</p> 368 * <pre><code>{@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} = [ I0 I1 I2 I3 I4 I5 I6 I7 I8 ] 369 * </code></pre> 370 * <p>which define a transform from input sensor colors, <code>P_in = [ r g b ]</code>, 371 * to output linear sRGB, <code>P_out = [ r' g' b' ]</code>,</p> 372 * <p>with colors as follows:</p> 373 * <pre><code>r' = I0r + I1g + I2b 374 * g' = I3r + I4g + I5b 375 * b' = I6r + I7g + I8b 376 * </code></pre> 377 * <p>Both the input and output value ranges must match. Overflow/underflow 378 * values are clipped to fit within the range.</p> 379 * 380 * @see CaptureRequest#COLOR_CORRECTION_GAINS 381 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 382 * @see CaptureRequest#CONTROL_AWB_MODE 383 * @see #COLOR_CORRECTION_MODE_TRANSFORM_MATRIX 384 * @see #COLOR_CORRECTION_MODE_FAST 385 * @see #COLOR_CORRECTION_MODE_HIGH_QUALITY 386 */ 387 public static final Key<Integer> COLOR_CORRECTION_MODE = 388 new Key<Integer>("android.colorCorrection.mode", int.class); 389 390 /** 391 * <p>A color transform matrix to use to transform 392 * from sensor RGB color space to output linear sRGB color space</p> 393 * <p>This matrix is either set by the camera device when the request 394 * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is not TRANSFORM_MATRIX, or 395 * directly by the application in the request when the 396 * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is TRANSFORM_MATRIX.</p> 397 * <p>In the latter case, the camera device may round the matrix to account 398 * for precision issues; the final rounded matrix should be reported back 399 * in this matrix result metadata. The transform should keep the magnitude 400 * of the output color values within <code>[0, 1.0]</code> (assuming input color 401 * values is within the normalized range <code>[0, 1.0]</code>), or clipping may occur.</p> 402 * 403 * @see CaptureRequest#COLOR_CORRECTION_MODE 404 */ 405 public static final Key<Rational[]> COLOR_CORRECTION_TRANSFORM = 406 new Key<Rational[]>("android.colorCorrection.transform", Rational[].class); 407 408 /** 409 * <p>Gains applying to Bayer raw color channels for 410 * white-balance.</p> 411 * <p>The 4-channel white-balance gains are defined in 412 * the order of <code>[R G_even G_odd B]</code>, where <code>G_even</code> is the gain 413 * for green pixels on even rows of the output, and <code>G_odd</code> 414 * is the gain for green pixels on the odd rows. if a HAL 415 * does not support a separate gain for even/odd green channels, 416 * it should use the <code>G_even</code> value, and write <code>G_odd</code> equal to 417 * <code>G_even</code> in the output result metadata.</p> 418 * <p>This array is either set by the camera device when the request 419 * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is not TRANSFORM_MATRIX, or 420 * directly by the application in the request when the 421 * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is TRANSFORM_MATRIX.</p> 422 * <p>The output should be the gains actually applied by the camera device to 423 * the current frame.</p> 424 * 425 * @see CaptureRequest#COLOR_CORRECTION_MODE 426 */ 427 public static final Key<float[]> COLOR_CORRECTION_GAINS = 428 new Key<float[]>("android.colorCorrection.gains", float[].class); 429 430 /** 431 * <p>The desired setting for the camera device's auto-exposure 432 * algorithm's antibanding compensation.</p> 433 * <p>Some kinds of lighting fixtures, such as some fluorescent 434 * lights, flicker at the rate of the power supply frequency 435 * (60Hz or 50Hz, depending on country). While this is 436 * typically not noticeable to a person, it can be visible to 437 * a camera device. If a camera sets its exposure time to the 438 * wrong value, the flicker may become visible in the 439 * viewfinder as flicker or in a final captured image, as a 440 * set of variable-brightness bands across the image.</p> 441 * <p>Therefore, the auto-exposure routines of camera devices 442 * include antibanding routines that ensure that the chosen 443 * exposure value will not cause such banding. The choice of 444 * exposure time depends on the rate of flicker, which the 445 * camera device can detect automatically, or the expected 446 * rate can be selected by the application using this 447 * control.</p> 448 * <p>A given camera device may not support all of the possible 449 * options for the antibanding mode. The 450 * {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_ANTIBANDING_MODES android.control.aeAvailableAntibandingModes} key contains 451 * the available modes for a given camera device.</p> 452 * <p>The default mode is AUTO, which must be supported by all 453 * camera devices.</p> 454 * <p>If manual exposure control is enabled (by setting 455 * {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} or {@link CaptureRequest#CONTROL_MODE android.control.mode} to OFF), 456 * then this setting has no effect, and the application must 457 * ensure it selects exposure times that do not cause banding 458 * issues. The {@link CaptureResult#STATISTICS_SCENE_FLICKER android.statistics.sceneFlicker} key can assist 459 * the application in this.</p> 460 * 461 * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_ANTIBANDING_MODES 462 * @see CaptureRequest#CONTROL_AE_MODE 463 * @see CaptureRequest#CONTROL_MODE 464 * @see CaptureResult#STATISTICS_SCENE_FLICKER 465 * @see #CONTROL_AE_ANTIBANDING_MODE_OFF 466 * @see #CONTROL_AE_ANTIBANDING_MODE_50HZ 467 * @see #CONTROL_AE_ANTIBANDING_MODE_60HZ 468 * @see #CONTROL_AE_ANTIBANDING_MODE_AUTO 469 */ 470 public static final Key<Integer> CONTROL_AE_ANTIBANDING_MODE = 471 new Key<Integer>("android.control.aeAntibandingMode", int.class); 472 473 /** 474 * <p>Adjustment to AE target image 475 * brightness</p> 476 * <p>For example, if EV step is 0.333, '6' will mean an 477 * exposure compensation of +2 EV; -3 will mean an exposure 478 * compensation of -1 EV. Note that this control will only be effective 479 * if {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} <code>!=</code> OFF. This control will take effect even when 480 * {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} <code>== true</code>.</p> 481 * <p>In the event of exposure compensation value being changed, camera device 482 * may take several frames to reach the newly requested exposure target. 483 * During that time, {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} field will be in the SEARCHING 484 * state. Once the new exposure target is reached, {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} will 485 * change from SEARCHING to either CONVERGED, LOCKED (if AE lock is enabled), or 486 * FLASH_REQUIRED (if the scene is too dark for still capture).</p> 487 * 488 * @see CaptureRequest#CONTROL_AE_LOCK 489 * @see CaptureRequest#CONTROL_AE_MODE 490 * @see CaptureResult#CONTROL_AE_STATE 491 */ 492 public static final Key<Integer> CONTROL_AE_EXPOSURE_COMPENSATION = 493 new Key<Integer>("android.control.aeExposureCompensation", int.class); 494 495 /** 496 * <p>Whether AE is currently locked to its latest 497 * calculated values.</p> 498 * <p>Note that even when AE is locked, the flash may be 499 * fired if the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is ON_AUTO_FLASH / ON_ALWAYS_FLASH / 500 * ON_AUTO_FLASH_REDEYE.</p> 501 * <p>When {@link CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION android.control.aeExposureCompensation} is changed, even if the AE lock 502 * is ON, the camera device will still adjust its exposure value.</p> 503 * <p>If AE precapture is triggered (see {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) 504 * when AE is already locked, the camera device will not change the exposure time 505 * ({@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}) and sensitivity ({@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}) 506 * parameters. The flash may be fired if the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} 507 * is ON_AUTO_FLASH/ON_AUTO_FLASH_REDEYE and the scene is too dark. If the 508 * {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is ON_ALWAYS_FLASH, the scene may become overexposed.</p> 509 * <p>See {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} for AE lock related state transition details.</p> 510 * 511 * @see CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION 512 * @see CaptureRequest#CONTROL_AE_MODE 513 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 514 * @see CaptureResult#CONTROL_AE_STATE 515 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 516 * @see CaptureRequest#SENSOR_SENSITIVITY 517 */ 518 public static final Key<Boolean> CONTROL_AE_LOCK = 519 new Key<Boolean>("android.control.aeLock", boolean.class); 520 521 /** 522 * <p>The desired mode for the camera device's 523 * auto-exposure routine.</p> 524 * <p>This control is only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} is 525 * AUTO.</p> 526 * <p>When set to any of the ON modes, the camera device's 527 * auto-exposure routine is enabled, overriding the 528 * application's selected exposure time, sensor sensitivity, 529 * and frame duration ({@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, 530 * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and 531 * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration}). If one of the FLASH modes 532 * is selected, the camera device's flash unit controls are 533 * also overridden.</p> 534 * <p>The FLASH modes are only available if the camera device 535 * has a flash unit ({@link CameraCharacteristics#FLASH_INFO_AVAILABLE android.flash.info.available} is <code>true</code>).</p> 536 * <p>If flash TORCH mode is desired, this field must be set to 537 * ON or OFF, and {@link CaptureRequest#FLASH_MODE android.flash.mode} set to TORCH.</p> 538 * <p>When set to any of the ON modes, the values chosen by the 539 * camera device auto-exposure routine for the overridden 540 * fields for a given capture will be available in its 541 * CaptureResult.</p> 542 * 543 * @see CaptureRequest#CONTROL_MODE 544 * @see CameraCharacteristics#FLASH_INFO_AVAILABLE 545 * @see CaptureRequest#FLASH_MODE 546 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 547 * @see CaptureRequest#SENSOR_FRAME_DURATION 548 * @see CaptureRequest#SENSOR_SENSITIVITY 549 * @see #CONTROL_AE_MODE_OFF 550 * @see #CONTROL_AE_MODE_ON 551 * @see #CONTROL_AE_MODE_ON_AUTO_FLASH 552 * @see #CONTROL_AE_MODE_ON_ALWAYS_FLASH 553 * @see #CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE 554 */ 555 public static final Key<Integer> CONTROL_AE_MODE = 556 new Key<Integer>("android.control.aeMode", int.class); 557 558 /** 559 * <p>List of areas to use for 560 * metering.</p> 561 * <p>Each area is a rectangle plus weight: xmin, ymin, 562 * xmax, ymax, weight. The rectangle is defined to be inclusive of the 563 * specified coordinates.</p> 564 * <p>The coordinate system is based on the active pixel array, 565 * with (0,0) being the top-left pixel in the active pixel array, and 566 * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, 567 * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the 568 * bottom-right pixel in the active pixel array. The weight 569 * should be nonnegative.</p> 570 * <p>If all regions have 0 weight, then no specific metering area 571 * needs to be used by the camera device. If the metering region is 572 * outside the current {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}, the camera device 573 * will ignore the sections outside the region and output the 574 * used sections in the frame metadata.</p> 575 * 576 * @see CaptureRequest#SCALER_CROP_REGION 577 * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE 578 */ 579 public static final Key<int[]> CONTROL_AE_REGIONS = 580 new Key<int[]>("android.control.aeRegions", int[].class); 581 582 /** 583 * <p>Range over which fps can be adjusted to 584 * maintain exposure</p> 585 * <p>Only constrains AE algorithm, not manual control 586 * of {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}</p> 587 * 588 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 589 */ 590 public static final Key<int[]> CONTROL_AE_TARGET_FPS_RANGE = 591 new Key<int[]>("android.control.aeTargetFpsRange", int[].class); 592 593 /** 594 * <p>Whether the camera device will trigger a precapture 595 * metering sequence when it processes this request.</p> 596 * <p>This entry is normally set to IDLE, or is not 597 * included at all in the request settings. When included and 598 * set to START, the camera device will trigger the autoexposure 599 * precapture metering sequence.</p> 600 * <p>The effect of AE precapture trigger depends on the current 601 * AE mode and state; see {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} for AE precapture 602 * state transition details.</p> 603 * 604 * @see CaptureResult#CONTROL_AE_STATE 605 * @see #CONTROL_AE_PRECAPTURE_TRIGGER_IDLE 606 * @see #CONTROL_AE_PRECAPTURE_TRIGGER_START 607 */ 608 public static final Key<Integer> CONTROL_AE_PRECAPTURE_TRIGGER = 609 new Key<Integer>("android.control.aePrecaptureTrigger", int.class); 610 611 /** 612 * <p>Whether AF is currently enabled, and what 613 * mode it is set to</p> 614 * <p>Only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} = AUTO and the lens is not fixed focus 615 * (i.e. <code>{@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance} > 0</code>).</p> 616 * <p>If the lens is controlled by the camera device auto-focus algorithm, 617 * the camera device will report the current AF status in {@link CaptureResult#CONTROL_AF_STATE android.control.afState} 618 * in result metadata.</p> 619 * 620 * @see CaptureResult#CONTROL_AF_STATE 621 * @see CaptureRequest#CONTROL_MODE 622 * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE 623 * @see #CONTROL_AF_MODE_OFF 624 * @see #CONTROL_AF_MODE_AUTO 625 * @see #CONTROL_AF_MODE_MACRO 626 * @see #CONTROL_AF_MODE_CONTINUOUS_VIDEO 627 * @see #CONTROL_AF_MODE_CONTINUOUS_PICTURE 628 * @see #CONTROL_AF_MODE_EDOF 629 */ 630 public static final Key<Integer> CONTROL_AF_MODE = 631 new Key<Integer>("android.control.afMode", int.class); 632 633 /** 634 * <p>List of areas to use for focus 635 * estimation.</p> 636 * <p>Each area is a rectangle plus weight: xmin, ymin, 637 * xmax, ymax, weight. The rectangle is defined to be inclusive of the 638 * specified coordinates.</p> 639 * <p>The coordinate system is based on the active pixel array, 640 * with (0,0) being the top-left pixel in the active pixel array, and 641 * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, 642 * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the 643 * bottom-right pixel in the active pixel array. The weight 644 * should be nonnegative.</p> 645 * <p>If all regions have 0 weight, then no specific focus area 646 * needs to be used by the camera device. If the focusing region is 647 * outside the current {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}, the camera device 648 * will ignore the sections outside the region and output the 649 * used sections in the frame metadata.</p> 650 * 651 * @see CaptureRequest#SCALER_CROP_REGION 652 * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE 653 */ 654 public static final Key<int[]> CONTROL_AF_REGIONS = 655 new Key<int[]>("android.control.afRegions", int[].class); 656 657 /** 658 * <p>Whether the camera device will trigger autofocus for this request.</p> 659 * <p>This entry is normally set to IDLE, or is not 660 * included at all in the request settings.</p> 661 * <p>When included and set to START, the camera device will trigger the 662 * autofocus algorithm. If autofocus is disabled, this trigger has no effect.</p> 663 * <p>When set to CANCEL, the camera device will cancel any active trigger, 664 * and return to its initial AF state.</p> 665 * <p>See {@link CaptureResult#CONTROL_AF_STATE android.control.afState} for what that means for each AF mode.</p> 666 * 667 * @see CaptureResult#CONTROL_AF_STATE 668 * @see #CONTROL_AF_TRIGGER_IDLE 669 * @see #CONTROL_AF_TRIGGER_START 670 * @see #CONTROL_AF_TRIGGER_CANCEL 671 */ 672 public static final Key<Integer> CONTROL_AF_TRIGGER = 673 new Key<Integer>("android.control.afTrigger", int.class); 674 675 /** 676 * <p>Whether AWB is currently locked to its 677 * latest calculated values.</p> 678 * <p>Note that AWB lock is only meaningful for AUTO 679 * mode; in other modes, AWB is already fixed to a specific 680 * setting.</p> 681 */ 682 public static final Key<Boolean> CONTROL_AWB_LOCK = 683 new Key<Boolean>("android.control.awbLock", boolean.class); 684 685 /** 686 * <p>Whether AWB is currently setting the color 687 * transform fields, and what its illumination target 688 * is.</p> 689 * <p>This control is only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} is AUTO.</p> 690 * <p>When set to the ON mode, the camera device's auto white balance 691 * routine is enabled, overriding the application's selected 692 * {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}, {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} and 693 * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode}.</p> 694 * <p>When set to the OFF mode, the camera device's auto white balance 695 * routine is disabled. The application manually controls the white 696 * balance by {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}, {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} 697 * and {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode}.</p> 698 * <p>When set to any other modes, the camera device's auto white balance 699 * routine is disabled. The camera device uses each particular illumination 700 * target for white balance adjustment.</p> 701 * 702 * @see CaptureRequest#COLOR_CORRECTION_GAINS 703 * @see CaptureRequest#COLOR_CORRECTION_MODE 704 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 705 * @see CaptureRequest#CONTROL_MODE 706 * @see #CONTROL_AWB_MODE_OFF 707 * @see #CONTROL_AWB_MODE_AUTO 708 * @see #CONTROL_AWB_MODE_INCANDESCENT 709 * @see #CONTROL_AWB_MODE_FLUORESCENT 710 * @see #CONTROL_AWB_MODE_WARM_FLUORESCENT 711 * @see #CONTROL_AWB_MODE_DAYLIGHT 712 * @see #CONTROL_AWB_MODE_CLOUDY_DAYLIGHT 713 * @see #CONTROL_AWB_MODE_TWILIGHT 714 * @see #CONTROL_AWB_MODE_SHADE 715 */ 716 public static final Key<Integer> CONTROL_AWB_MODE = 717 new Key<Integer>("android.control.awbMode", int.class); 718 719 /** 720 * <p>List of areas to use for illuminant 721 * estimation.</p> 722 * <p>Only used in AUTO mode.</p> 723 * <p>Each area is a rectangle plus weight: xmin, ymin, 724 * xmax, ymax, weight. The rectangle is defined to be inclusive of the 725 * specified coordinates.</p> 726 * <p>The coordinate system is based on the active pixel array, 727 * with (0,0) being the top-left pixel in the active pixel array, and 728 * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, 729 * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the 730 * bottom-right pixel in the active pixel array. The weight 731 * should be nonnegative.</p> 732 * <p>If all regions have 0 weight, then no specific auto-white balance (AWB) area 733 * needs to be used by the camera device. If the AWB region is 734 * outside the current {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}, the camera device 735 * will ignore the sections outside the region and output the 736 * used sections in the frame metadata.</p> 737 * 738 * @see CaptureRequest#SCALER_CROP_REGION 739 * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE 740 */ 741 public static final Key<int[]> CONTROL_AWB_REGIONS = 742 new Key<int[]>("android.control.awbRegions", int[].class); 743 744 /** 745 * <p>Information to the camera device 3A (auto-exposure, 746 * auto-focus, auto-white balance) routines about the purpose 747 * of this capture, to help the camera device to decide optimal 3A 748 * strategy.</p> 749 * <p>This control (except for MANUAL) is only effective if 750 * <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} != OFF</code> and any 3A routine is active.</p> 751 * <p>ZERO_SHUTTER_LAG must be supported if {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} 752 * contains ZSL. MANUAL must be supported if {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} 753 * contains MANUAL_SENSOR.</p> 754 * 755 * @see CaptureRequest#CONTROL_MODE 756 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 757 * @see #CONTROL_CAPTURE_INTENT_CUSTOM 758 * @see #CONTROL_CAPTURE_INTENT_PREVIEW 759 * @see #CONTROL_CAPTURE_INTENT_STILL_CAPTURE 760 * @see #CONTROL_CAPTURE_INTENT_VIDEO_RECORD 761 * @see #CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT 762 * @see #CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG 763 * @see #CONTROL_CAPTURE_INTENT_MANUAL 764 */ 765 public static final Key<Integer> CONTROL_CAPTURE_INTENT = 766 new Key<Integer>("android.control.captureIntent", int.class); 767 768 /** 769 * <p>A special color effect to apply.</p> 770 * <p>When this mode is set, a color effect will be applied 771 * to images produced by the camera device. The interpretation 772 * and implementation of these color effects is left to the 773 * implementor of the camera device, and should not be 774 * depended on to be consistent (or present) across all 775 * devices.</p> 776 * <p>A color effect will only be applied if 777 * {@link CaptureRequest#CONTROL_MODE android.control.mode} != OFF.</p> 778 * 779 * @see CaptureRequest#CONTROL_MODE 780 * @see #CONTROL_EFFECT_MODE_OFF 781 * @see #CONTROL_EFFECT_MODE_MONO 782 * @see #CONTROL_EFFECT_MODE_NEGATIVE 783 * @see #CONTROL_EFFECT_MODE_SOLARIZE 784 * @see #CONTROL_EFFECT_MODE_SEPIA 785 * @see #CONTROL_EFFECT_MODE_POSTERIZE 786 * @see #CONTROL_EFFECT_MODE_WHITEBOARD 787 * @see #CONTROL_EFFECT_MODE_BLACKBOARD 788 * @see #CONTROL_EFFECT_MODE_AQUA 789 */ 790 public static final Key<Integer> CONTROL_EFFECT_MODE = 791 new Key<Integer>("android.control.effectMode", int.class); 792 793 /** 794 * <p>Overall mode of 3A control 795 * routines.</p> 796 * <p>High-level 3A control. When set to OFF, all 3A control 797 * by the camera device is disabled. The application must set the fields for 798 * capture parameters itself.</p> 799 * <p>When set to AUTO, the individual algorithm controls in 800 * android.control.* are in effect, such as {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}.</p> 801 * <p>When set to USE_SCENE_MODE, the individual controls in 802 * android.control.* are mostly disabled, and the camera device implements 803 * one of the scene mode settings (such as ACTION, SUNSET, or PARTY) 804 * as it wishes. The camera device scene mode 3A settings are provided by 805 * android.control.sceneModeOverrides.</p> 806 * <p>When set to OFF_KEEP_STATE, it is similar to OFF mode, the only difference 807 * is that this frame will not be used by camera device background 3A statistics 808 * update, as if this frame is never captured. This mode can be used in the scenario 809 * where the application doesn't want a 3A manual control capture to affect 810 * the subsequent auto 3A capture results.</p> 811 * 812 * @see CaptureRequest#CONTROL_AF_MODE 813 * @see #CONTROL_MODE_OFF 814 * @see #CONTROL_MODE_AUTO 815 * @see #CONTROL_MODE_USE_SCENE_MODE 816 * @see #CONTROL_MODE_OFF_KEEP_STATE 817 */ 818 public static final Key<Integer> CONTROL_MODE = 819 new Key<Integer>("android.control.mode", int.class); 820 821 /** 822 * <p>A camera mode optimized for conditions typical in a particular 823 * capture setting.</p> 824 * <p>This is the mode that that is active when 825 * <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == USE_SCENE_MODE</code>. Aside from FACE_PRIORITY, 826 * these modes will disable {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, 827 * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, and {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} while in use.</p> 828 * <p>The interpretation and implementation of these scene modes is left 829 * to the implementor of the camera device. Their behavior will not be 830 * consistent across all devices, and any given device may only implement 831 * a subset of these modes.</p> 832 * 833 * @see CaptureRequest#CONTROL_AE_MODE 834 * @see CaptureRequest#CONTROL_AF_MODE 835 * @see CaptureRequest#CONTROL_AWB_MODE 836 * @see CaptureRequest#CONTROL_MODE 837 * @see #CONTROL_SCENE_MODE_DISABLED 838 * @see #CONTROL_SCENE_MODE_FACE_PRIORITY 839 * @see #CONTROL_SCENE_MODE_ACTION 840 * @see #CONTROL_SCENE_MODE_PORTRAIT 841 * @see #CONTROL_SCENE_MODE_LANDSCAPE 842 * @see #CONTROL_SCENE_MODE_NIGHT 843 * @see #CONTROL_SCENE_MODE_NIGHT_PORTRAIT 844 * @see #CONTROL_SCENE_MODE_THEATRE 845 * @see #CONTROL_SCENE_MODE_BEACH 846 * @see #CONTROL_SCENE_MODE_SNOW 847 * @see #CONTROL_SCENE_MODE_SUNSET 848 * @see #CONTROL_SCENE_MODE_STEADYPHOTO 849 * @see #CONTROL_SCENE_MODE_FIREWORKS 850 * @see #CONTROL_SCENE_MODE_SPORTS 851 * @see #CONTROL_SCENE_MODE_PARTY 852 * @see #CONTROL_SCENE_MODE_CANDLELIGHT 853 * @see #CONTROL_SCENE_MODE_BARCODE 854 */ 855 public static final Key<Integer> CONTROL_SCENE_MODE = 856 new Key<Integer>("android.control.sceneMode", int.class); 857 858 /** 859 * <p>Whether video stabilization is 860 * active</p> 861 * <p>If enabled, video stabilization can modify the 862 * {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion} to keep the video stream 863 * stabilized</p> 864 * 865 * @see CaptureRequest#SCALER_CROP_REGION 866 * @see #CONTROL_VIDEO_STABILIZATION_MODE_OFF 867 * @see #CONTROL_VIDEO_STABILIZATION_MODE_ON 868 */ 869 public static final Key<Integer> CONTROL_VIDEO_STABILIZATION_MODE = 870 new Key<Integer>("android.control.videoStabilizationMode", int.class); 871 872 /** 873 * <p>Operation mode for edge 874 * enhancement.</p> 875 * <p>Edge/sharpness/detail enhancement. OFF means no 876 * enhancement will be applied by the camera device.</p> 877 * <p>This must be set to one of the modes listed in {@link CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES android.edge.availableEdgeModes}.</p> 878 * <p>FAST/HIGH_QUALITY both mean camera device determined enhancement 879 * will be applied. HIGH_QUALITY mode indicates that the 880 * camera device will use the highest-quality enhancement algorithms, 881 * even if it slows down capture rate. FAST means the camera device will 882 * not slow down capture rate when applying edge enhancement.</p> 883 * 884 * @see CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES 885 * @see #EDGE_MODE_OFF 886 * @see #EDGE_MODE_FAST 887 * @see #EDGE_MODE_HIGH_QUALITY 888 */ 889 public static final Key<Integer> EDGE_MODE = 890 new Key<Integer>("android.edge.mode", int.class); 891 892 /** 893 * <p>The desired mode for for the camera device's flash control.</p> 894 * <p>This control is only effective when flash unit is available 895 * (<code>{@link CameraCharacteristics#FLASH_INFO_AVAILABLE android.flash.info.available} == true</code>).</p> 896 * <p>When this control is used, the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} must be set to ON or OFF. 897 * Otherwise, the camera device auto-exposure related flash control (ON_AUTO_FLASH, 898 * ON_ALWAYS_FLASH, or ON_AUTO_FLASH_REDEYE) will override this control.</p> 899 * <p>When set to OFF, the camera device will not fire flash for this capture.</p> 900 * <p>When set to SINGLE, the camera device will fire flash regardless of the camera 901 * device's auto-exposure routine's result. When used in still capture case, this 902 * control should be used along with AE precapture metering sequence 903 * ({@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}), otherwise, the image may be incorrectly exposed.</p> 904 * <p>When set to TORCH, the flash will be on continuously. This mode can be used 905 * for use cases such as preview, auto-focus assist, still capture, or video recording.</p> 906 * <p>The flash status will be reported by {@link CaptureResult#FLASH_STATE android.flash.state} in the capture result metadata.</p> 907 * 908 * @see CaptureRequest#CONTROL_AE_MODE 909 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 910 * @see CameraCharacteristics#FLASH_INFO_AVAILABLE 911 * @see CaptureResult#FLASH_STATE 912 * @see #FLASH_MODE_OFF 913 * @see #FLASH_MODE_SINGLE 914 * @see #FLASH_MODE_TORCH 915 */ 916 public static final Key<Integer> FLASH_MODE = 917 new Key<Integer>("android.flash.mode", int.class); 918 919 /** 920 * <p>Set operational mode for hot pixel correction.</p> 921 * <p>Valid modes for this camera device are listed in 922 * {@link CameraCharacteristics#HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES android.hotPixel.availableHotPixelModes}.</p> 923 * <p>Hotpixel correction interpolates out, or otherwise removes, pixels 924 * that do not accurately encode the incoming light (i.e. pixels that 925 * are stuck at an arbitrary value).</p> 926 * 927 * @see CameraCharacteristics#HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES 928 * @see #HOT_PIXEL_MODE_OFF 929 * @see #HOT_PIXEL_MODE_FAST 930 * @see #HOT_PIXEL_MODE_HIGH_QUALITY 931 */ 932 public static final Key<Integer> HOT_PIXEL_MODE = 933 new Key<Integer>("android.hotPixel.mode", int.class); 934 935 /** 936 * <p>GPS coordinates to include in output JPEG 937 * EXIF</p> 938 */ 939 public static final Key<double[]> JPEG_GPS_COORDINATES = 940 new Key<double[]>("android.jpeg.gpsCoordinates", double[].class); 941 942 /** 943 * <p>32 characters describing GPS algorithm to 944 * include in EXIF</p> 945 */ 946 public static final Key<String> JPEG_GPS_PROCESSING_METHOD = 947 new Key<String>("android.jpeg.gpsProcessingMethod", String.class); 948 949 /** 950 * <p>Time GPS fix was made to include in 951 * EXIF</p> 952 */ 953 public static final Key<Long> JPEG_GPS_TIMESTAMP = 954 new Key<Long>("android.jpeg.gpsTimestamp", long.class); 955 956 /** 957 * <p>Orientation of JPEG image to 958 * write</p> 959 */ 960 public static final Key<Integer> JPEG_ORIENTATION = 961 new Key<Integer>("android.jpeg.orientation", int.class); 962 963 /** 964 * <p>Compression quality of the final JPEG 965 * image</p> 966 * <p>85-95 is typical usage range</p> 967 */ 968 public static final Key<Byte> JPEG_QUALITY = 969 new Key<Byte>("android.jpeg.quality", byte.class); 970 971 /** 972 * <p>Compression quality of JPEG 973 * thumbnail</p> 974 */ 975 public static final Key<Byte> JPEG_THUMBNAIL_QUALITY = 976 new Key<Byte>("android.jpeg.thumbnailQuality", byte.class); 977 978 /** 979 * <p>Resolution of embedded JPEG thumbnail</p> 980 * <p>When set to (0, 0) value, the JPEG EXIF will not contain thumbnail, 981 * but the captured JPEG will still be a valid image.</p> 982 * <p>When a jpeg image capture is issued, the thumbnail size selected should have 983 * the same aspect ratio as the jpeg image.</p> 984 */ 985 public static final Key<android.util.Size> JPEG_THUMBNAIL_SIZE = 986 new Key<android.util.Size>("android.jpeg.thumbnailSize", android.util.Size.class); 987 988 /** 989 * <p>The ratio of lens focal length to the effective 990 * aperture diameter.</p> 991 * <p>This will only be supported on the camera devices that 992 * have variable aperture lens. The aperture value can only be 993 * one of the values listed in {@link CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES android.lens.info.availableApertures}.</p> 994 * <p>When this is supported and {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is OFF, 995 * this can be set along with {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, 996 * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} 997 * to achieve manual exposure control.</p> 998 * <p>The requested aperture value may take several frames to reach the 999 * requested value; the camera device will report the current (intermediate) 1000 * aperture size in capture result metadata while the aperture is changing. 1001 * While the aperture is still changing, {@link CaptureResult#LENS_STATE android.lens.state} will be set to MOVING.</p> 1002 * <p>When this is supported and {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is one of 1003 * the ON modes, this will be overridden by the camera device 1004 * auto-exposure algorithm, the overridden values are then provided 1005 * back to the user in the corresponding result.</p> 1006 * 1007 * @see CaptureRequest#CONTROL_AE_MODE 1008 * @see CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES 1009 * @see CaptureResult#LENS_STATE 1010 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 1011 * @see CaptureRequest#SENSOR_FRAME_DURATION 1012 * @see CaptureRequest#SENSOR_SENSITIVITY 1013 */ 1014 public static final Key<Float> LENS_APERTURE = 1015 new Key<Float>("android.lens.aperture", float.class); 1016 1017 /** 1018 * <p>State of lens neutral density filter(s).</p> 1019 * <p>This will not be supported on most camera devices. On devices 1020 * where this is supported, this may only be set to one of the 1021 * values included in {@link CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES android.lens.info.availableFilterDensities}.</p> 1022 * <p>Lens filters are typically used to lower the amount of light the 1023 * sensor is exposed to (measured in steps of EV). As used here, an EV 1024 * step is the standard logarithmic representation, which are 1025 * non-negative, and inversely proportional to the amount of light 1026 * hitting the sensor. For example, setting this to 0 would result 1027 * in no reduction of the incoming light, and setting this to 2 would 1028 * mean that the filter is set to reduce incoming light by two stops 1029 * (allowing 1/4 of the prior amount of light to the sensor).</p> 1030 * <p>It may take several frames before the lens filter density changes 1031 * to the requested value. While the filter density is still changing, 1032 * {@link CaptureResult#LENS_STATE android.lens.state} will be set to MOVING.</p> 1033 * 1034 * @see CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES 1035 * @see CaptureResult#LENS_STATE 1036 */ 1037 public static final Key<Float> LENS_FILTER_DENSITY = 1038 new Key<Float>("android.lens.filterDensity", float.class); 1039 1040 /** 1041 * <p>The current lens focal length; used for optical zoom.</p> 1042 * <p>This setting controls the physical focal length of the camera 1043 * device's lens. Changing the focal length changes the field of 1044 * view of the camera device, and is usually used for optical zoom.</p> 1045 * <p>Like {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} and {@link CaptureRequest#LENS_APERTURE android.lens.aperture}, this 1046 * setting won't be applied instantaneously, and it may take several 1047 * frames before the lens can change to the requested focal length. 1048 * While the focal length is still changing, {@link CaptureResult#LENS_STATE android.lens.state} will 1049 * be set to MOVING.</p> 1050 * <p>This is expected not to be supported on most devices.</p> 1051 * 1052 * @see CaptureRequest#LENS_APERTURE 1053 * @see CaptureRequest#LENS_FOCUS_DISTANCE 1054 * @see CaptureResult#LENS_STATE 1055 */ 1056 public static final Key<Float> LENS_FOCAL_LENGTH = 1057 new Key<Float>("android.lens.focalLength", float.class); 1058 1059 /** 1060 * <p>Distance to plane of sharpest focus, 1061 * measured from frontmost surface of the lens</p> 1062 * <p>0 means infinity focus. Used value will be clamped 1063 * to [0, {@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance}].</p> 1064 * <p>Like {@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, this setting won't be applied 1065 * instantaneously, and it may take several frames before the lens 1066 * can move to the requested focus distance. While the lens is still moving, 1067 * {@link CaptureResult#LENS_STATE android.lens.state} will be set to MOVING.</p> 1068 * 1069 * @see CaptureRequest#LENS_FOCAL_LENGTH 1070 * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE 1071 * @see CaptureResult#LENS_STATE 1072 */ 1073 public static final Key<Float> LENS_FOCUS_DISTANCE = 1074 new Key<Float>("android.lens.focusDistance", float.class); 1075 1076 /** 1077 * <p>Sets whether the camera device uses optical image stabilization (OIS) 1078 * when capturing images.</p> 1079 * <p>OIS is used to compensate for motion blur due to small movements of 1080 * the camera during capture. Unlike digital image stabilization, OIS makes 1081 * use of mechanical elements to stabilize the camera sensor, and thus 1082 * allows for longer exposure times before camera shake becomes 1083 * apparent.</p> 1084 * <p>This is not expected to be supported on most devices.</p> 1085 * @see #LENS_OPTICAL_STABILIZATION_MODE_OFF 1086 * @see #LENS_OPTICAL_STABILIZATION_MODE_ON 1087 */ 1088 public static final Key<Integer> LENS_OPTICAL_STABILIZATION_MODE = 1089 new Key<Integer>("android.lens.opticalStabilizationMode", int.class); 1090 1091 /** 1092 * <p>Mode of operation for the noise reduction 1093 * algorithm</p> 1094 * <p>Noise filtering control. OFF means no noise reduction 1095 * will be applied by the camera device.</p> 1096 * <p>This must be set to a valid mode in 1097 * {@link CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES android.noiseReduction.availableNoiseReductionModes}.</p> 1098 * <p>FAST/HIGH_QUALITY both mean camera device determined noise filtering 1099 * will be applied. HIGH_QUALITY mode indicates that the camera device 1100 * will use the highest-quality noise filtering algorithms, 1101 * even if it slows down capture rate. FAST means the camera device should not 1102 * slow down capture rate when applying noise filtering.</p> 1103 * 1104 * @see CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES 1105 * @see #NOISE_REDUCTION_MODE_OFF 1106 * @see #NOISE_REDUCTION_MODE_FAST 1107 * @see #NOISE_REDUCTION_MODE_HIGH_QUALITY 1108 */ 1109 public static final Key<Integer> NOISE_REDUCTION_MODE = 1110 new Key<Integer>("android.noiseReduction.mode", int.class); 1111 1112 /** 1113 * <p>An application-specified ID for the current 1114 * request. Must be maintained unchanged in output 1115 * frame</p> 1116 * @hide 1117 */ 1118 public static final Key<Integer> REQUEST_ID = 1119 new Key<Integer>("android.request.id", int.class); 1120 1121 /** 1122 * <p>(x, y, width, height).</p> 1123 * <p>A rectangle with the top-level corner of (x,y) and size 1124 * (width, height). The region of the sensor that is used for 1125 * output. Each stream must use this rectangle to produce its 1126 * output, cropping to a smaller region if necessary to 1127 * maintain the stream's aspect ratio.</p> 1128 * <p>HAL2.x uses only (x, y, width)</p> 1129 * <p>The crop region is applied after the RAW to other color space (e.g. YUV) 1130 * conversion. Since raw streams (e.g. RAW16) don't have the conversion stage, 1131 * it is not croppable. The crop region will be ignored by raw streams.</p> 1132 * <p>For non-raw streams, any additional per-stream cropping will 1133 * be done to maximize the final pixel area of the stream.</p> 1134 * <p>For example, if the crop region is set to a 4:3 aspect 1135 * ratio, then 4:3 streams should use the exact crop 1136 * region. 16:9 streams should further crop vertically 1137 * (letterbox).</p> 1138 * <p>Conversely, if the crop region is set to a 16:9, then 4:3 1139 * outputs should crop horizontally (pillarbox), and 16:9 1140 * streams should match exactly. These additional crops must 1141 * be centered within the crop region.</p> 1142 * <p>The output streams must maintain square pixels at all 1143 * times, no matter what the relative aspect ratios of the 1144 * crop region and the stream are. Negative values for 1145 * corner are allowed for raw output if full pixel array is 1146 * larger than active pixel array. Width and height may be 1147 * rounded to nearest larger supportable width, especially 1148 * for raw output, where only a few fixed scales may be 1149 * possible. The width and height of the crop region cannot 1150 * be set to be smaller than floor( activeArraySize.width / 1151 * {@link CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM android.scaler.availableMaxDigitalZoom} ) and floor( 1152 * activeArraySize.height / 1153 * {@link CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM android.scaler.availableMaxDigitalZoom}), respectively.</p> 1154 * 1155 * @see CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM 1156 */ 1157 public static final Key<android.graphics.Rect> SCALER_CROP_REGION = 1158 new Key<android.graphics.Rect>("android.scaler.cropRegion", android.graphics.Rect.class); 1159 1160 /** 1161 * <p>Duration each pixel is exposed to 1162 * light.</p> 1163 * <p>If the sensor can't expose this exact duration, it should shorten the 1164 * duration exposed to the nearest possible value (rather than expose longer).</p> 1165 */ 1166 public static final Key<Long> SENSOR_EXPOSURE_TIME = 1167 new Key<Long>("android.sensor.exposureTime", long.class); 1168 1169 /** 1170 * <p>Duration from start of frame exposure to 1171 * start of next frame exposure.</p> 1172 * <p>The maximum frame rate that can be supported by a camera subsystem is 1173 * a function of many factors:</p> 1174 * <ul> 1175 * <li>Requested resolutions of output image streams</li> 1176 * <li>Availability of binning / skipping modes on the imager</li> 1177 * <li>The bandwidth of the imager interface</li> 1178 * <li>The bandwidth of the various ISP processing blocks</li> 1179 * </ul> 1180 * <p>Since these factors can vary greatly between different ISPs and 1181 * sensors, the camera abstraction tries to represent the bandwidth 1182 * restrictions with as simple a model as possible.</p> 1183 * <p>The model presented has the following characteristics:</p> 1184 * <ul> 1185 * <li>The image sensor is always configured to output the smallest 1186 * resolution possible given the application's requested output stream 1187 * sizes. The smallest resolution is defined as being at least as large 1188 * as the largest requested output stream size; the camera pipeline must 1189 * never digitally upsample sensor data when the crop region covers the 1190 * whole sensor. In general, this means that if only small output stream 1191 * resolutions are configured, the sensor can provide a higher frame 1192 * rate.</li> 1193 * <li>Since any request may use any or all the currently configured 1194 * output streams, the sensor and ISP must be configured to support 1195 * scaling a single capture to all the streams at the same time. This 1196 * means the camera pipeline must be ready to produce the largest 1197 * requested output size without any delay. Therefore, the overall 1198 * frame rate of a given configured stream set is governed only by the 1199 * largest requested stream resolution.</li> 1200 * <li>Using more than one output stream in a request does not affect the 1201 * frame duration.</li> 1202 * <li>Certain format-streams may need to do additional background processing 1203 * before data is consumed/produced by that stream. These processors 1204 * can run concurrently to the rest of the camera pipeline, but 1205 * cannot process more than 1 capture at a time.</li> 1206 * </ul> 1207 * <p>The necessary information for the application, given the model above, 1208 * is provided via the {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} field 1209 * using StreamConfigurationMap#getOutputMinFrameDuration(int, Size). 1210 * These are used to determine the maximum frame rate / minimum frame 1211 * duration that is possible for a given stream configuration.</p> 1212 * <p>Specifically, the application can use the following rules to 1213 * determine the minimum frame duration it can request from the camera 1214 * device:</p> 1215 * <ol> 1216 * <li>Let the set of currently configured input/output streams 1217 * be called <code>S</code>.</li> 1218 * <li>Find the minimum frame durations for each stream in <code>S</code>, by 1219 * looking it up in {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} using 1220 * StreamConfigurationMap#getOutputMinFrameDuration(int, Size) (with 1221 * its respective size/format). Let this set of frame durations be called 1222 * <code>F</code>.</li> 1223 * <li>For any given request <code>R</code>, the minimum frame duration allowed 1224 * for <code>R</code> is the maximum out of all values in <code>F</code>. Let the streams 1225 * used in <code>R</code> be called <code>S_r</code>.</li> 1226 * </ol> 1227 * <p>If none of the streams in <code>S_r</code> have a stall time (listed in 1228 * StreamConfigurationMap#getOutputStallDuration(int,Size) using its 1229 * respective size/format), then the frame duration in 1230 * <code>F</code> determines the steady state frame rate that the application will 1231 * get if it uses <code>R</code> as a repeating request. Let this special kind 1232 * of request be called <code>Rsimple</code>.</p> 1233 * <p>A repeating request <code>Rsimple</code> can be <em>occasionally</em> interleaved 1234 * by a single capture of a new request <code>Rstall</code> (which has at least 1235 * one in-use stream with a non-0 stall time) and if <code>Rstall</code> has the 1236 * same minimum frame duration this will not cause a frame rate loss 1237 * if all buffers from the previous <code>Rstall</code> have already been 1238 * delivered.</p> 1239 * <p>For more details about stalling, see 1240 * StreamConfigurationMap#getOutputStallDuration(int,Size).</p> 1241 * 1242 * @see CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP 1243 */ 1244 public static final Key<Long> SENSOR_FRAME_DURATION = 1245 new Key<Long>("android.sensor.frameDuration", long.class); 1246 1247 /** 1248 * <p>Gain applied to image data. Must be 1249 * implemented through analog gain only if set to values 1250 * below 'maximum analog sensitivity'.</p> 1251 * <p>If the sensor can't apply this exact gain, it should lessen the 1252 * gain to the nearest possible value (rather than gain more).</p> 1253 * <p>ISO 12232:2006 REI method</p> 1254 */ 1255 public static final Key<Integer> SENSOR_SENSITIVITY = 1256 new Key<Integer>("android.sensor.sensitivity", int.class); 1257 1258 /** 1259 * <p>A pixel <code>[R, G_even, G_odd, B]</code> that supplies the test pattern 1260 * when {@link CaptureRequest#SENSOR_TEST_PATTERN_MODE android.sensor.testPatternMode} is SOLID_COLOR.</p> 1261 * <p>Each color channel is treated as an unsigned 32-bit integer. 1262 * The camera device then uses the most significant X bits 1263 * that correspond to how many bits are in its Bayer raw sensor 1264 * output.</p> 1265 * <p>For example, a sensor with RAW10 Bayer output would use the 1266 * 10 most significant bits from each color channel.</p> 1267 * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> 1268 * 1269 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 1270 */ 1271 public static final Key<int[]> SENSOR_TEST_PATTERN_DATA = 1272 new Key<int[]>("android.sensor.testPatternData", int[].class); 1273 1274 /** 1275 * <p>When enabled, the sensor sends a test pattern instead of 1276 * doing a real exposure from the camera.</p> 1277 * <p>When a test pattern is enabled, all manual sensor controls specified 1278 * by android.sensor.* should be ignored. All other controls should 1279 * work as normal.</p> 1280 * <p>For example, if manual flash is enabled, flash firing should still 1281 * occur (and that the test pattern remain unmodified, since the flash 1282 * would not actually affect it).</p> 1283 * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> 1284 * @see #SENSOR_TEST_PATTERN_MODE_OFF 1285 * @see #SENSOR_TEST_PATTERN_MODE_SOLID_COLOR 1286 * @see #SENSOR_TEST_PATTERN_MODE_COLOR_BARS 1287 * @see #SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY 1288 * @see #SENSOR_TEST_PATTERN_MODE_PN9 1289 * @see #SENSOR_TEST_PATTERN_MODE_CUSTOM1 1290 */ 1291 public static final Key<Integer> SENSOR_TEST_PATTERN_MODE = 1292 new Key<Integer>("android.sensor.testPatternMode", int.class); 1293 1294 /** 1295 * <p>Quality of lens shading correction applied 1296 * to the image data.</p> 1297 * <p>When set to OFF mode, no lens shading correction will be applied by the 1298 * camera device, and an identity lens shading map data will be provided 1299 * if <code>{@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode} == ON</code>. For example, for lens 1300 * shading map with size specified as <code>{@link CameraCharacteristics#LENS_INFO_SHADING_MAP_SIZE android.lens.info.shadingMapSize} = [ 4, 3 ]</code>, 1301 * the output {@link CaptureResult#STATISTICS_LENS_SHADING_MAP android.statistics.lensShadingMap} for this case will be an identity map 1302 * shown below:</p> 1303 * <pre><code>[ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1304 * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1305 * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1306 * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1307 * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1308 * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 ] 1309 * </code></pre> 1310 * <p>When set to other modes, lens shading correction will be applied by the 1311 * camera device. Applications can request lens shading map data by setting 1312 * {@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode} to ON, and then the camera device will provide 1313 * lens shading map data in {@link CaptureResult#STATISTICS_LENS_SHADING_MAP android.statistics.lensShadingMap}, with size specified 1314 * by {@link CameraCharacteristics#LENS_INFO_SHADING_MAP_SIZE android.lens.info.shadingMapSize}; the returned shading map data will be the one 1315 * applied by the camera device for this capture request.</p> 1316 * <p>The shading map data may depend on the AE and AWB statistics, therefore the reliability 1317 * of the map data may be affected by the AE and AWB algorithms. When AE and AWB are in 1318 * AUTO modes({@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} <code>!=</code> OFF and {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} <code>!=</code> OFF), 1319 * to get best results, it is recommended that the applications wait for the AE and AWB to 1320 * be converged before using the returned shading map data.</p> 1321 * 1322 * @see CaptureRequest#CONTROL_AE_MODE 1323 * @see CaptureRequest#CONTROL_AWB_MODE 1324 * @see CameraCharacteristics#LENS_INFO_SHADING_MAP_SIZE 1325 * @see CaptureResult#STATISTICS_LENS_SHADING_MAP 1326 * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE 1327 * @see #SHADING_MODE_OFF 1328 * @see #SHADING_MODE_FAST 1329 * @see #SHADING_MODE_HIGH_QUALITY 1330 */ 1331 public static final Key<Integer> SHADING_MODE = 1332 new Key<Integer>("android.shading.mode", int.class); 1333 1334 /** 1335 * <p>State of the face detector 1336 * unit</p> 1337 * <p>Whether face detection is enabled, and whether it 1338 * should output just the basic fields or the full set of 1339 * fields. Value must be one of the 1340 * {@link CameraCharacteristics#STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES android.statistics.info.availableFaceDetectModes}.</p> 1341 * 1342 * @see CameraCharacteristics#STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES 1343 * @see #STATISTICS_FACE_DETECT_MODE_OFF 1344 * @see #STATISTICS_FACE_DETECT_MODE_SIMPLE 1345 * @see #STATISTICS_FACE_DETECT_MODE_FULL 1346 */ 1347 public static final Key<Integer> STATISTICS_FACE_DETECT_MODE = 1348 new Key<Integer>("android.statistics.faceDetectMode", int.class); 1349 1350 /** 1351 * <p>Operating mode for hotpixel map generation.</p> 1352 * <p>If set to ON, a hotpixel map is returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}. 1353 * If set to OFF, no hotpixel map should be returned.</p> 1354 * <p>This must be set to a valid mode from {@link CameraCharacteristics#STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES android.statistics.info.availableHotPixelMapModes}.</p> 1355 * 1356 * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP 1357 * @see CameraCharacteristics#STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES 1358 */ 1359 public static final Key<Boolean> STATISTICS_HOT_PIXEL_MAP_MODE = 1360 new Key<Boolean>("android.statistics.hotPixelMapMode", boolean.class); 1361 1362 /** 1363 * <p>Whether the camera device will output the lens 1364 * shading map in output result metadata.</p> 1365 * <p>When set to ON, 1366 * {@link CaptureResult#STATISTICS_LENS_SHADING_MAP android.statistics.lensShadingMap} must be provided in 1367 * the output result metadata.</p> 1368 * 1369 * @see CaptureResult#STATISTICS_LENS_SHADING_MAP 1370 * @see #STATISTICS_LENS_SHADING_MAP_MODE_OFF 1371 * @see #STATISTICS_LENS_SHADING_MAP_MODE_ON 1372 */ 1373 public static final Key<Integer> STATISTICS_LENS_SHADING_MAP_MODE = 1374 new Key<Integer>("android.statistics.lensShadingMapMode", int.class); 1375 1376 /** 1377 * <p>Tonemapping / contrast / gamma curve for the blue 1378 * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is 1379 * CONTRAST_CURVE.</p> 1380 * <p>See {@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} for more details.</p> 1381 * 1382 * @see CaptureRequest#TONEMAP_CURVE_RED 1383 * @see CaptureRequest#TONEMAP_MODE 1384 */ 1385 public static final Key<float[]> TONEMAP_CURVE_BLUE = 1386 new Key<float[]>("android.tonemap.curveBlue", float[].class); 1387 1388 /** 1389 * <p>Tonemapping / contrast / gamma curve for the green 1390 * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is 1391 * CONTRAST_CURVE.</p> 1392 * <p>See {@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} for more details.</p> 1393 * 1394 * @see CaptureRequest#TONEMAP_CURVE_RED 1395 * @see CaptureRequest#TONEMAP_MODE 1396 */ 1397 public static final Key<float[]> TONEMAP_CURVE_GREEN = 1398 new Key<float[]>("android.tonemap.curveGreen", float[].class); 1399 1400 /** 1401 * <p>Tonemapping / contrast / gamma curve for the red 1402 * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is 1403 * CONTRAST_CURVE.</p> 1404 * <p>Each channel's curve is defined by an array of control points:</p> 1405 * <pre><code>{@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} = 1406 * [ P0in, P0out, P1in, P1out, P2in, P2out, P3in, P3out, ..., PNin, PNout ] 1407 * 2 <= N <= {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}</code></pre> 1408 * <p>These are sorted in order of increasing <code>Pin</code>; it is always 1409 * guaranteed that input values 0.0 and 1.0 are included in the list to 1410 * define a complete mapping. For input values between control points, 1411 * the camera device must linearly interpolate between the control 1412 * points.</p> 1413 * <p>Each curve can have an independent number of points, and the number 1414 * of points can be less than max (that is, the request doesn't have to 1415 * always provide a curve with number of points equivalent to 1416 * {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}).</p> 1417 * <p>A few examples, and their corresponding graphical mappings; these 1418 * only specify the red channel and the precision is limited to 4 1419 * digits, for conciseness.</p> 1420 * <p>Linear mapping:</p> 1421 * <pre><code>{@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} = [ 0, 0, 1.0, 1.0 ] 1422 * </code></pre> 1423 * <p><img alt="Linear mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/linear_tonemap.png" /></p> 1424 * <p>Invert mapping:</p> 1425 * <pre><code>{@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} = [ 0, 1.0, 1.0, 0 ] 1426 * </code></pre> 1427 * <p><img alt="Inverting mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/inverse_tonemap.png" /></p> 1428 * <p>Gamma 1/2.2 mapping, with 16 control points:</p> 1429 * <pre><code>{@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} = [ 1430 * 0.0000, 0.0000, 0.0667, 0.2920, 0.1333, 0.4002, 0.2000, 0.4812, 1431 * 0.2667, 0.5484, 0.3333, 0.6069, 0.4000, 0.6594, 0.4667, 0.7072, 1432 * 0.5333, 0.7515, 0.6000, 0.7928, 0.6667, 0.8317, 0.7333, 0.8685, 1433 * 0.8000, 0.9035, 0.8667, 0.9370, 0.9333, 0.9691, 1.0000, 1.0000 ] 1434 * </code></pre> 1435 * <p><img alt="Gamma = 1/2.2 tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/gamma_tonemap.png" /></p> 1436 * <p>Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:</p> 1437 * <pre><code>{@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed} = [ 1438 * 0.0000, 0.0000, 0.0667, 0.2864, 0.1333, 0.4007, 0.2000, 0.4845, 1439 * 0.2667, 0.5532, 0.3333, 0.6125, 0.4000, 0.6652, 0.4667, 0.7130, 1440 * 0.5333, 0.7569, 0.6000, 0.7977, 0.6667, 0.8360, 0.7333, 0.8721, 1441 * 0.8000, 0.9063, 0.8667, 0.9389, 0.9333, 0.9701, 1.0000, 1.0000 ] 1442 * </code></pre> 1443 * <p><img alt="sRGB tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p> 1444 * 1445 * @see CaptureRequest#TONEMAP_CURVE_RED 1446 * @see CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS 1447 * @see CaptureRequest#TONEMAP_MODE 1448 */ 1449 public static final Key<float[]> TONEMAP_CURVE_RED = 1450 new Key<float[]>("android.tonemap.curveRed", float[].class); 1451 1452 /** 1453 * <p>High-level global contrast/gamma/tonemapping control.</p> 1454 * <p>When switching to an application-defined contrast curve by setting 1455 * {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} to CONTRAST_CURVE, the curve is defined 1456 * per-channel with a set of <code>(in, out)</code> points that specify the 1457 * mapping from input high-bit-depth pixel value to the output 1458 * low-bit-depth value. Since the actual pixel ranges of both input 1459 * and output may change depending on the camera pipeline, the values 1460 * are specified by normalized floating-point numbers.</p> 1461 * <p>More-complex color mapping operations such as 3D color look-up 1462 * tables, selective chroma enhancement, or other non-linear color 1463 * transforms will be disabled when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is 1464 * CONTRAST_CURVE.</p> 1465 * <p>This must be set to a valid mode in 1466 * {@link CameraCharacteristics#TONEMAP_AVAILABLE_TONE_MAP_MODES android.tonemap.availableToneMapModes}.</p> 1467 * <p>When using either FAST or HIGH_QUALITY, the camera device will 1468 * emit its own tonemap curve in {@link CaptureRequest#TONEMAP_CURVE_RED android.tonemap.curveRed}, 1469 * {@link CaptureRequest#TONEMAP_CURVE_GREEN android.tonemap.curveGreen}, and {@link CaptureRequest#TONEMAP_CURVE_BLUE android.tonemap.curveBlue}. 1470 * These values are always available, and as close as possible to the 1471 * actually used nonlinear/nonglobal transforms.</p> 1472 * <p>If a request is sent with CONTRAST_CURVE with the camera device's 1473 * provided curve in FAST or HIGH_QUALITY, the image's tonemap will be 1474 * roughly the same.</p> 1475 * 1476 * @see CameraCharacteristics#TONEMAP_AVAILABLE_TONE_MAP_MODES 1477 * @see CaptureRequest#TONEMAP_CURVE_BLUE 1478 * @see CaptureRequest#TONEMAP_CURVE_GREEN 1479 * @see CaptureRequest#TONEMAP_CURVE_RED 1480 * @see CaptureRequest#TONEMAP_MODE 1481 * @see #TONEMAP_MODE_CONTRAST_CURVE 1482 * @see #TONEMAP_MODE_FAST 1483 * @see #TONEMAP_MODE_HIGH_QUALITY 1484 */ 1485 public static final Key<Integer> TONEMAP_MODE = 1486 new Key<Integer>("android.tonemap.mode", int.class); 1487 1488 /** 1489 * <p>This LED is nominally used to indicate to the user 1490 * that the camera is powered on and may be streaming images back to the 1491 * Application Processor. In certain rare circumstances, the OS may 1492 * disable this when video is processed locally and not transmitted to 1493 * any untrusted applications.</p> 1494 * <p>In particular, the LED <em>must</em> always be on when the data could be 1495 * transmitted off the device. The LED <em>should</em> always be on whenever 1496 * data is stored locally on the device.</p> 1497 * <p>The LED <em>may</em> be off if a trusted application is using the data that 1498 * doesn't violate the above rules.</p> 1499 * @hide 1500 */ 1501 public static final Key<Boolean> LED_TRANSMIT = 1502 new Key<Boolean>("android.led.transmit", boolean.class); 1503 1504 /** 1505 * <p>Whether black-level compensation is locked 1506 * to its current values, or is free to vary.</p> 1507 * <p>When set to ON, the values used for black-level 1508 * compensation will not change until the lock is set to 1509 * OFF.</p> 1510 * <p>Since changes to certain capture parameters (such as 1511 * exposure time) may require resetting of black level 1512 * compensation, the camera device must report whether setting 1513 * the black level lock was successful in the output result 1514 * metadata.</p> 1515 * <p>For example, if a sequence of requests is as follows:</p> 1516 * <ul> 1517 * <li>Request 1: Exposure = 10ms, Black level lock = OFF</li> 1518 * <li>Request 2: Exposure = 10ms, Black level lock = ON</li> 1519 * <li>Request 3: Exposure = 10ms, Black level lock = ON</li> 1520 * <li>Request 4: Exposure = 20ms, Black level lock = ON</li> 1521 * <li>Request 5: Exposure = 20ms, Black level lock = ON</li> 1522 * <li>Request 6: Exposure = 20ms, Black level lock = ON</li> 1523 * </ul> 1524 * <p>And the exposure change in Request 4 requires the camera 1525 * device to reset the black level offsets, then the output 1526 * result metadata is expected to be:</p> 1527 * <ul> 1528 * <li>Result 1: Exposure = 10ms, Black level lock = OFF</li> 1529 * <li>Result 2: Exposure = 10ms, Black level lock = ON</li> 1530 * <li>Result 3: Exposure = 10ms, Black level lock = ON</li> 1531 * <li>Result 4: Exposure = 20ms, Black level lock = OFF</li> 1532 * <li>Result 5: Exposure = 20ms, Black level lock = ON</li> 1533 * <li>Result 6: Exposure = 20ms, Black level lock = ON</li> 1534 * </ul> 1535 * <p>This indicates to the application that on frame 4, black 1536 * levels were reset due to exposure value changes, and pixel 1537 * values may not be consistent across captures.</p> 1538 * <p>The camera device will maintain the lock to the extent 1539 * possible, only overriding the lock to OFF when changes to 1540 * other request parameters require a black level recalculation 1541 * or reset.</p> 1542 */ 1543 public static final Key<Boolean> BLACK_LEVEL_LOCK = 1544 new Key<Boolean>("android.blackLevel.lock", boolean.class); 1545 1546 /*~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ 1547 * End generated code 1548 *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~O@*/ 1549} 1550