btif_dm.c revision 9d52f88bfc07556cb01ab3055f5b1242c9b467aa
1/****************************************************************************** 2 * 3 * Copyright (C) 2009-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19/************************************************************************************ 20 * 21 * Filename: btif_dm.c 22 * 23 * Description: Contains Device Management (DM) related functionality 24 * 25 * 26 ***********************************************************************************/ 27#include <stdio.h> 28#include <stdlib.h> 29#include <unistd.h> 30 31#include <hardware/bluetooth.h> 32 33#include <utils/Log.h> 34#include <cutils/properties.h> 35#include "gki.h" 36#include "btu.h" 37#include "bd.h" 38#include "bta_api.h" 39#include "btif_api.h" 40#include "btif_util.h" 41#include "btif_dm.h" 42#include "btif_storage.h" 43#include "btif_hh.h" 44#include "btif_config.h" 45 46#include "bta_gatt_api.h" 47 48/****************************************************************************** 49** Device specific workarounds 50******************************************************************************/ 51 52/** 53 * The devices below have proven problematic during the pairing process, often 54 * requiring multiple retries to complete pairing. To avoid degrading the user 55 * experience for other devices, explicitely blacklist troubled devices here. 56 */ 57static const UINT8 blacklist_pairing_retries[][3] = { 58 {0x9C, 0xDF, 0x03} // BMW car kits (Harman/Becker) 59}; 60 61BOOLEAN blacklistPairingRetries(BD_ADDR bd_addr) 62{ 63 const unsigned blacklist_size = sizeof(blacklist_pairing_retries) 64 / sizeof(blacklist_pairing_retries[0]); 65 for (unsigned i = 0; i != blacklist_size; ++i) 66 { 67 if (blacklist_pairing_retries[i][0] == bd_addr[0] && 68 blacklist_pairing_retries[i][1] == bd_addr[1] && 69 blacklist_pairing_retries[i][2] == bd_addr[2]) 70 return TRUE; 71 } 72 return FALSE; 73} 74 75/****************************************************************************** 76** Constants & Macros 77******************************************************************************/ 78 79#define COD_UNCLASSIFIED ((0x1F) << 8) 80#define COD_HID_KEYBOARD 0x0540 81#define COD_HID_POINTING 0x0580 82#define COD_HID_COMBO 0x05C0 83#define COD_HID_MAJOR 0x0500 84#define COD_AV_HEADSETS 0x0404 85#define COD_AV_HANDSFREE 0x0408 86#define COD_AV_HEADPHONES 0x0418 87#define COD_AV_PORTABLE_AUDIO 0x041C 88#define COD_AV_HIFI_AUDIO 0x0428 89 90 91#define BTIF_DM_DEFAULT_INQ_MAX_RESULTS 0 92#define BTIF_DM_DEFAULT_INQ_MAX_DURATION 10 93#define BTIF_DM_MAX_SDP_ATTEMPTS_AFTER_PAIRING 2 94 95#define NUM_TIMEOUT_RETRIES 5 96 97#define PROPERTY_PRODUCT_MODEL "ro.product.model" 98#define DEFAULT_LOCAL_NAME_MAX 31 99#if (DEFAULT_LOCAL_NAME_MAX > BTM_MAX_LOC_BD_NAME_LEN) 100 #error "default btif local name size exceeds stack supported length" 101#endif 102 103#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 104#define BTIF_DM_INTERLEAVE_DURATION_BR_ONE 2 105#define BTIF_DM_INTERLEAVE_DURATION_LE_ONE 2 106#define BTIF_DM_INTERLEAVE_DURATION_BR_TWO 3 107#define BTIF_DM_INTERLEAVE_DURATION_LE_TWO 4 108#endif 109 110#define MAX_SDP_BL_ENTRIES 3 111 112#define BOND_TYPE_UNKNOWN 0 113#define BOND_TYPE_PERSISTENT 1 114#define BOND_TYPE_TEMPORARY 2 115 116#define ENCRYPTED_BREDR 2 117#define ENCRYPTED_LE 4 118 119typedef struct 120{ 121 bt_bond_state_t state; 122 BD_ADDR bd_addr; 123 UINT8 bond_type; 124 UINT8 pin_code_len; 125 UINT8 is_ssp; 126 UINT8 auth_req; 127 UINT8 io_cap; 128 UINT8 autopair_attempts; 129 UINT8 timeout_retries; 130 UINT8 is_local_initiated; 131 UINT8 sdp_attempts; 132#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 133 BOOLEAN is_le_only; 134 btif_dm_ble_cb_t ble; 135#endif 136} btif_dm_pairing_cb_t; 137 138 139typedef struct 140{ 141 UINT8 ir[BT_OCTET16_LEN]; 142 UINT8 irk[BT_OCTET16_LEN]; 143 UINT8 dhk[BT_OCTET16_LEN]; 144}btif_dm_local_key_id_t; 145 146typedef struct 147{ 148 BOOLEAN is_er_rcvd; 149 UINT8 er[BT_OCTET16_LEN]; 150 BOOLEAN is_id_keys_rcvd; 151 btif_dm_local_key_id_t id_keys; /* ID kyes */ 152 153}btif_dm_local_key_cb_t; 154 155typedef struct 156{ 157 BD_ADDR bd_addr; 158 BD_NAME bd_name; 159} btif_dm_remote_name_t; 160 161typedef struct 162{ 163 BT_OCTET16 sp_c; 164 BT_OCTET16 sp_r; 165 BD_ADDR oob_bdaddr; /* peer bdaddr*/ 166} btif_dm_oob_cb_t; 167 168typedef struct 169{ 170 bt_bdaddr_t bdaddr; 171 UINT8 transport; /* 0=Unknown, 1=BR/EDR, 2=LE */ 172} btif_dm_create_bond_cb_t; 173 174typedef struct 175{ 176 uint8_t status; 177 uint8_t ctrl_state; 178 uint64_t tx_time; 179 uint64_t rx_time; 180 uint64_t idle_time; 181 uint64_t energy_used; 182} btif_activity_energy_info_cb_t; 183 184typedef struct 185{ 186 unsigned int manufact_id; 187}skip_sdp_entry_t; 188 189#define BTA_SERVICE_ID_TO_SERVICE_MASK(id) (1 << (id)) 190 191#define MAX_SDP_BL_ENTRIES 3 192#define UUID_HUMAN_INTERFACE_DEVICE "00001124-0000-1000-8000-00805f9b34fb" 193 194static skip_sdp_entry_t sdp_blacklist[] = {{76}}; //Apple Mouse and Keyboard 195 196 197/* This flag will be true if HCI_Inquiry is in progress */ 198static BOOLEAN btif_dm_inquiry_in_progress = FALSE; 199 200 201 202/************************************************************************************ 203** Static variables 204************************************************************************************/ 205static char btif_default_local_name[DEFAULT_LOCAL_NAME_MAX+1] = {'\0'}; 206 207/****************************************************************************** 208** Static functions 209******************************************************************************/ 210static btif_dm_pairing_cb_t pairing_cb; 211static btif_dm_oob_cb_t oob_cb; 212static void btif_dm_generic_evt(UINT16 event, char* p_param); 213static void btif_dm_cb_create_bond(bt_bdaddr_t *bd_addr, tBTA_TRANSPORT transport); 214static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME *p_remote_name); 215static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name, 216 DEV_CLASS dev_class, tBT_DEVICE_TYPE dev_type); 217#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 218static btif_dm_local_key_cb_t ble_local_key_cb; 219static void btif_dm_ble_key_notif_evt(tBTA_DM_SP_KEY_NOTIF *p_ssp_key_notif); 220static void btif_dm_ble_auth_cmpl_evt (tBTA_DM_AUTH_CMPL *p_auth_cmpl); 221static void btif_dm_ble_passkey_req_evt(tBTA_DM_PIN_REQ *p_pin_req); 222#endif 223 224static void bte_scan_filt_param_cfg_evt(UINT8 action_type, 225 tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, 226 tBTA_DM_BLE_REF_VALUE ref_value, tBTA_STATUS status); 227 228static char* btif_get_default_local_name(); 229/****************************************************************************** 230** Externs 231******************************************************************************/ 232extern UINT16 bta_service_id_to_uuid_lkup_tbl [BTA_MAX_SERVICE_ID]; 233extern bt_status_t btif_hf_execute_service(BOOLEAN b_enable); 234extern bt_status_t btif_av_execute_service(BOOLEAN b_enable); 235extern bt_status_t btif_hh_execute_service(BOOLEAN b_enable); 236extern bt_status_t btif_hf_client_execute_service(BOOLEAN b_enable); 237extern bt_status_t btif_mce_execute_service(BOOLEAN b_enable); 238extern int btif_hh_connect(bt_bdaddr_t *bd_addr); 239extern void bta_gatt_convert_uuid16_to_uuid128(UINT8 uuid_128[LEN_UUID_128], UINT16 uuid_16); 240 241 242/****************************************************************************** 243** Functions 244******************************************************************************/ 245 246bt_status_t btif_in_execute_service_request(tBTA_SERVICE_ID service_id, 247 BOOLEAN b_enable) 248{ 249 /* Check the service_ID and invoke the profile's BT state changed API */ 250 switch (service_id) 251 { 252 case BTA_HFP_SERVICE_ID: 253 case BTA_HSP_SERVICE_ID: 254 { 255 btif_hf_execute_service(b_enable); 256 }break; 257 case BTA_A2DP_SERVICE_ID: 258 { 259 btif_av_execute_service(b_enable); 260 }break; 261 case BTA_HID_SERVICE_ID: 262 { 263 btif_hh_execute_service(b_enable); 264 }break; 265 case BTA_HFP_HS_SERVICE_ID: 266 { 267 btif_hf_client_execute_service(b_enable); 268 }break; 269 case BTA_MAP_SERVICE_ID: 270 { 271 btif_mce_execute_service(b_enable); 272 }break; 273 default: 274 BTIF_TRACE_ERROR("%s: Unknown service being enabled", __FUNCTION__); 275 return BT_STATUS_FAIL; 276 } 277 return BT_STATUS_SUCCESS; 278} 279 280/******************************************************************************* 281** 282** Function check_eir_remote_name 283** 284** Description Check if remote name is in the EIR data 285** 286** Returns TRUE if remote name found 287** Populate p_remote_name, if provided and remote name found 288** 289*******************************************************************************/ 290static BOOLEAN check_eir_remote_name(tBTA_DM_SEARCH *p_search_data, 291 UINT8 *p_remote_name, UINT8 *p_remote_name_len) 292{ 293 UINT8 *p_eir_remote_name = NULL; 294 UINT8 remote_name_len = 0; 295 296 /* Check EIR for remote name and services */ 297 if (p_search_data->inq_res.p_eir) 298 { 299 p_eir_remote_name = BTA_CheckEirData(p_search_data->inq_res.p_eir, 300 BTM_EIR_COMPLETE_LOCAL_NAME_TYPE, &remote_name_len); 301 if (!p_eir_remote_name) 302 { 303 p_eir_remote_name = BTA_CheckEirData(p_search_data->inq_res.p_eir, 304 BTM_EIR_SHORTENED_LOCAL_NAME_TYPE, &remote_name_len); 305 } 306 307 if (p_eir_remote_name) 308 { 309 if (remote_name_len > BD_NAME_LEN) 310 remote_name_len = BD_NAME_LEN; 311 312 if (p_remote_name && p_remote_name_len) 313 { 314 memcpy(p_remote_name, p_eir_remote_name, remote_name_len); 315 *(p_remote_name + remote_name_len) = 0; 316 *p_remote_name_len = remote_name_len; 317 } 318 319 return TRUE; 320 } 321 } 322 323 return FALSE; 324 325} 326 327/******************************************************************************* 328** 329** Function check_cached_remote_name 330** 331** Description Check if remote name is in the NVRAM cache 332** 333** Returns TRUE if remote name found 334** Populate p_remote_name, if provided and remote name found 335** 336*******************************************************************************/ 337static BOOLEAN check_cached_remote_name(tBTA_DM_SEARCH *p_search_data, 338 UINT8 *p_remote_name, UINT8 *p_remote_name_len) 339{ 340 bt_bdname_t bdname; 341 bt_bdaddr_t remote_bdaddr; 342 bt_property_t prop_name; 343 344 /* check if we already have it in our btif_storage cache */ 345 bdcpy(remote_bdaddr.address, p_search_data->inq_res.bd_addr); 346 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_BDNAME, 347 sizeof(bt_bdname_t), &bdname); 348 if (btif_storage_get_remote_device_property( 349 &remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS) 350 { 351 if (p_remote_name && p_remote_name_len) 352 { 353 strcpy((char *)p_remote_name, (char *)bdname.name); 354 *p_remote_name_len = strlen((char *)p_remote_name); 355 } 356 return TRUE; 357 } 358 359 return FALSE; 360} 361 362BOOLEAN check_cod(const bt_bdaddr_t *remote_bdaddr, uint32_t cod) 363{ 364 uint32_t remote_cod; 365 bt_property_t prop_name; 366 367 /* check if we already have it in our btif_storage cache */ 368 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_CLASS_OF_DEVICE, 369 sizeof(uint32_t), &remote_cod); 370 if (btif_storage_get_remote_device_property((bt_bdaddr_t *)remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS) 371 { 372 BTIF_TRACE_ERROR("%s: remote_cod = 0x%06x", __FUNCTION__, remote_cod); 373 if ((remote_cod & 0x7ff) == cod) 374 return TRUE; 375 } 376 377 return FALSE; 378} 379 380BOOLEAN check_cod_hid(const bt_bdaddr_t *remote_bdaddr, uint32_t cod) 381{ 382 uint32_t remote_cod; 383 bt_property_t prop_name; 384 385 /* check if we already have it in our btif_storage cache */ 386 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_CLASS_OF_DEVICE, 387 sizeof(uint32_t), &remote_cod); 388 if (btif_storage_get_remote_device_property((bt_bdaddr_t *)remote_bdaddr, 389 &prop_name) == BT_STATUS_SUCCESS) 390 { 391 BTIF_TRACE_DEBUG("%s: remote_cod = 0x%06x", __FUNCTION__, remote_cod); 392 if ((remote_cod & 0x700) == cod) 393 return TRUE; 394 } 395 return FALSE; 396} 397 398BOOLEAN check_hid_le(const bt_bdaddr_t *remote_bdaddr) 399{ 400 uint32_t remote_dev_type; 401 bt_property_t prop_name; 402 403 /* check if we already have it in our btif_storage cache */ 404 BTIF_STORAGE_FILL_PROPERTY(&prop_name,BT_PROPERTY_TYPE_OF_DEVICE, 405 sizeof(uint32_t), &remote_dev_type); 406 if (btif_storage_get_remote_device_property((bt_bdaddr_t *)remote_bdaddr, 407 &prop_name) == BT_STATUS_SUCCESS) 408 { 409 if (remote_dev_type == BT_DEVICE_DEVTYPE_BLE) 410 { 411 bdstr_t bdstr; 412 bd2str(remote_bdaddr, &bdstr); 413 if(btif_config_exist(bdstr, "HidAppId")) 414 return TRUE; 415 } 416 } 417 return FALSE; 418} 419 420/***************************************************************************** 421** 422** Function check_sdp_bl 423** 424** Description Checks if a given device is blacklisted to skip sdp 425** 426** Parameters skip_sdp_entry 427** 428** Returns TRUE if the device is present in blacklist, else FALSE 429** 430*******************************************************************************/ 431BOOLEAN check_sdp_bl(const bt_bdaddr_t *remote_bdaddr) 432{ 433 UINT8 i = 0; 434 UINT16 manufacturer = 0; 435 UINT8 lmp_ver = 0; 436 UINT16 lmp_subver = 0; 437 tBTM_STATUS btm_status; 438 bt_property_t prop_name; 439 bt_remote_version_t info; 440 bt_status_t status; 441 442 443 if (remote_bdaddr == NULL) 444 return FALSE; 445 446/* fetch additional info about remote device used in iop query */ 447 btm_status = BTM_ReadRemoteVersion(*(BD_ADDR*)remote_bdaddr, &lmp_ver, 448 &manufacturer, &lmp_subver); 449 450 451 452 /* if not available yet, try fetching from config database */ 453 BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_REMOTE_VERSION_INFO, 454 sizeof(bt_remote_version_t), &info); 455 456 if (btif_storage_get_remote_device_property((bt_bdaddr_t *)remote_bdaddr, 457 &prop_name) != BT_STATUS_SUCCESS) 458 { 459 460 return FALSE; 461 } 462 manufacturer = info.manufacturer; 463 464 for (int i = 0; i < MAX_SDP_BL_ENTRIES; i++) 465 { 466 if (manufacturer == sdp_blacklist[i].manufact_id) 467 return TRUE; 468 } 469 return FALSE; 470} 471 472 473static void bond_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr, bt_bond_state_t state) 474{ 475 /* Send bonding state only once - based on outgoing/incoming we may receive duplicates */ 476 if ( (pairing_cb.state == state) && (state == BT_BOND_STATE_BONDING) ) 477 return; 478 479 if (pairing_cb.bond_type == BOND_TYPE_TEMPORARY) 480 { 481 state = BT_BOND_STATE_NONE; 482 } 483 BTIF_TRACE_DEBUG("%s: state=%d prev_state=%d", __FUNCTION__, state, pairing_cb.state); 484 485 HAL_CBACK(bt_hal_cbacks, bond_state_changed_cb, status, bd_addr, state); 486 487 if (state == BT_BOND_STATE_BONDING) 488 { 489 pairing_cb.state = state; 490 bdcpy(pairing_cb.bd_addr, bd_addr->address); 491 } 492 else 493 { 494 memset(&pairing_cb, 0, sizeof(pairing_cb)); 495 } 496 497} 498 499/* store remote version in bt config to always have access 500 to it post pairing*/ 501static void btif_update_remote_version_property(bt_bdaddr_t *p_bd) 502{ 503 bt_property_t property; 504 UINT8 lmp_ver = 0; 505 UINT16 lmp_subver = 0; 506 UINT16 mfct_set = 0; 507 tBTM_STATUS btm_status; 508 bt_remote_version_t info; 509 bt_status_t status; 510 bdstr_t bdstr; 511 512 btm_status = BTM_ReadRemoteVersion(*(BD_ADDR*)p_bd, &lmp_ver, 513 &mfct_set, &lmp_subver); 514 515 ALOGD("remote version info [%s]: %x, %x, %x", bd2str(p_bd, &bdstr), 516 lmp_ver, mfct_set, lmp_subver); 517 518 if (btm_status == BTM_SUCCESS) 519 { 520 /* always update cache to ensure we have availability whenever BTM API 521 is not populated */ 522 info.manufacturer = mfct_set; 523 info.sub_ver = lmp_subver; 524 info.version = lmp_ver; 525 BTIF_STORAGE_FILL_PROPERTY(&property, 526 BT_PROPERTY_REMOTE_VERSION_INFO, sizeof(bt_remote_version_t), 527 &info); 528 status = btif_storage_set_remote_device_property(p_bd, &property); 529 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote version", status); 530 } 531} 532 533 534static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name, 535 DEV_CLASS dev_class, tBT_DEVICE_TYPE device_type) 536{ 537 int num_properties = 0; 538 bt_property_t properties[3]; 539 bt_bdaddr_t bdaddr; 540 bt_status_t status; 541 UINT32 cod; 542 bt_device_type_t dev_type; 543 544 memset(properties, 0, sizeof(properties)); 545 bdcpy(bdaddr.address, bd_addr); 546 547 /* remote name */ 548 if (strlen((const char *) bd_name)) 549 { 550 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 551 BT_PROPERTY_BDNAME, strlen((char *)bd_name), bd_name); 552 status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]); 553 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device name", status); 554 num_properties++; 555 } 556 557 /* class of device */ 558 cod = devclass2uint(dev_class); 559 BTIF_TRACE_DEBUG("%s():cod is 0x%06x", __FUNCTION__, cod); 560 if ( cod == 0) { 561 /* Try to retrieve cod from storage */ 562 BTIF_TRACE_DEBUG("%s():cod is 0, checking cod from storage", __FUNCTION__); 563 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 564 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod); 565 status = btif_storage_get_remote_device_property(&bdaddr, &properties[num_properties]); 566 BTIF_TRACE_DEBUG("%s():cod retreived from storage is 0x%06x", __FUNCTION__, cod); 567 if ( cod == 0) { 568 BTIF_TRACE_DEBUG("%s():cod is again 0, set as unclassified", __FUNCTION__); 569 cod = COD_UNCLASSIFIED; 570 } 571 } 572 573 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 574 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod); 575 status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]); 576 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device class", status); 577 num_properties++; 578 579 /* device type */ 580 dev_type = device_type; 581 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 582 BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), &dev_type); 583 status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]); 584 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device type", status); 585 num_properties++; 586 587 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 588 status, &bdaddr, num_properties, properties); 589} 590 591/******************************************************************************* 592** 593** Function btif_dm_cb_hid_remote_name 594** 595** Description Remote name callback for HID device. Called in btif context 596** Special handling for HID devices 597** 598** Returns void 599** 600*******************************************************************************/ 601static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME *p_remote_name) 602{ 603 BTIF_TRACE_DEBUG("%s: status=%d pairing_cb.state=%d", __FUNCTION__, p_remote_name->status, pairing_cb.state); 604 if (pairing_cb.state == BT_BOND_STATE_BONDING) 605 { 606 bt_bdaddr_t remote_bd; 607 608 bdcpy(remote_bd.address, pairing_cb.bd_addr); 609 610 if (p_remote_name->status == BTM_SUCCESS) 611 { 612 bond_state_changed(BT_STATUS_SUCCESS, &remote_bd, BT_BOND_STATE_BONDED); 613 } 614 else 615 bond_state_changed(BT_STATUS_FAIL, &remote_bd, BT_BOND_STATE_NONE); 616 } 617} 618 619/******************************************************************************* 620** 621** Function btif_dm_cb_create_bond 622** 623** Description Create bond initiated from the BTIF thread context 624** Special handling for HID devices 625** 626** Returns void 627** 628*******************************************************************************/ 629static void btif_dm_cb_create_bond(bt_bdaddr_t *bd_addr, tBTA_TRANSPORT transport) 630{ 631 BOOLEAN is_hid = check_cod(bd_addr, COD_HID_POINTING); 632 bond_state_changed(BT_STATUS_SUCCESS, bd_addr, BT_BOND_STATE_BONDING); 633 634#if BLE_INCLUDED == TRUE 635 int device_type; 636 int addr_type; 637 bdstr_t bdstr; 638 bd2str(bd_addr, &bdstr); 639 if (transport == BT_TRANSPORT_LE) 640 { 641 if (!btif_config_get_int((char const *)&bdstr,"DevType", &device_type)) 642 { 643 btif_config_set_int(bdstr, "DevType", BT_DEVICE_TYPE_BLE); 644 } 645 if (btif_storage_get_remote_addr_type(bd_addr, &addr_type) != BT_STATUS_SUCCESS) 646 { 647 btif_storage_set_remote_addr_type(bd_addr, BLE_ADDR_PUBLIC); 648 } 649 } 650 if((btif_config_get_int((char const *)&bdstr,"DevType", &device_type) && 651 (btif_storage_get_remote_addr_type(bd_addr, &addr_type) == BT_STATUS_SUCCESS) && 652 (device_type == BT_DEVICE_TYPE_BLE)) || (transport == BT_TRANSPORT_LE)) 653 { 654 BTA_DmAddBleDevice(bd_addr->address, addr_type, BT_DEVICE_TYPE_BLE); 655 } 656#endif 657 658#if BLE_INCLUDED == TRUE 659 if(is_hid && device_type != BT_DEVICE_TYPE_BLE) 660#else 661 if(is_hid) 662#endif 663 { 664 int status; 665 status = btif_hh_connect(bd_addr); 666 if(status != BT_STATUS_SUCCESS) 667 bond_state_changed(status, bd_addr, BT_BOND_STATE_NONE); 668 } 669 else 670 { 671 BTA_DmBondByTransport((UINT8 *)bd_addr->address, transport); 672 } 673 /* Track originator of bond creation */ 674 pairing_cb.is_local_initiated = TRUE; 675 676} 677 678/******************************************************************************* 679** 680** Function btif_dm_cb_remove_bond 681** 682** Description remove bond initiated from the BTIF thread context 683** Special handling for HID devices 684** 685** Returns void 686** 687*******************************************************************************/ 688void btif_dm_cb_remove_bond(bt_bdaddr_t *bd_addr) 689{ 690 bdstr_t bdstr; 691 /*special handling for HID devices */ 692 /* VUP needs to be sent if its a HID Device. The HID HOST module will check if there 693 is a valid hid connection with this bd_addr. If yes VUP will be issued.*/ 694#if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)) 695 if (btif_hh_virtual_unplug(bd_addr) != BT_STATUS_SUCCESS) 696#endif 697 { 698 BTA_DmRemoveDevice((UINT8 *)bd_addr->address); 699 } 700} 701 702/******************************************************************************* 703** 704** Function btif_dm_get_connection_state 705** 706** Description Returns whether the remote device is currently connected 707** and whether encryption is active for the connection 708** 709** Returns 0 if not connected; 1 if connected and > 1 if connection is 710** encrypted 711** 712*******************************************************************************/ 713uint16_t btif_dm_get_connection_state(const bt_bdaddr_t *bd_addr) 714{ 715 uint8_t *bda = (uint8_t*)bd_addr->address; 716 uint16_t rc = BTA_DmGetConnectionState(bda); 717 718 if (rc != 0) 719 { 720 uint8_t flags = 0; 721 722 BTM_GetSecurityFlagsByTransport(bda, &flags, BT_TRANSPORT_BR_EDR); 723 BTIF_TRACE_DEBUG("%s: security flags (BR/EDR)=0x%02x", __FUNCTION__, flags); 724 if (flags & BTM_SEC_FLAG_ENCRYPTED) 725 rc |= ENCRYPTED_BREDR; 726 727 BTM_GetSecurityFlagsByTransport(bda, &flags, BT_TRANSPORT_LE); 728 BTIF_TRACE_DEBUG("%s: security flags (LE)=0x%02x", __FUNCTION__, flags); 729 if (flags & BTM_SEC_FLAG_ENCRYPTED) 730 rc |= ENCRYPTED_LE; 731 } 732 733 return rc; 734} 735 736/******************************************************************************* 737** 738** Function search_devices_copy_cb 739** 740** Description Deep copy callback for search devices event 741** 742** Returns void 743** 744*******************************************************************************/ 745static void search_devices_copy_cb(UINT16 event, char *p_dest, char *p_src) 746{ 747 tBTA_DM_SEARCH *p_dest_data = (tBTA_DM_SEARCH *) p_dest; 748 tBTA_DM_SEARCH *p_src_data = (tBTA_DM_SEARCH *) p_src; 749 750 if (!p_src) 751 return; 752 753 BTIF_TRACE_DEBUG("%s: event=%s", __FUNCTION__, dump_dm_search_event(event)); 754 memcpy(p_dest_data, p_src_data, sizeof(tBTA_DM_SEARCH)); 755 switch (event) 756 { 757 case BTA_DM_INQ_RES_EVT: 758 { 759 if (p_src_data->inq_res.p_eir) 760 { 761 p_dest_data->inq_res.p_eir = (UINT8 *)(p_dest + sizeof(tBTA_DM_SEARCH)); 762 memcpy(p_dest_data->inq_res.p_eir, p_src_data->inq_res.p_eir, HCI_EXT_INQ_RESPONSE_LEN); 763 } 764 } 765 break; 766 767 case BTA_DM_DISC_RES_EVT: 768 { 769 if (p_src_data->disc_res.raw_data_size && p_src_data->disc_res.p_raw_data) 770 { 771 p_dest_data->disc_res.p_raw_data = (UINT8 *)(p_dest + sizeof(tBTA_DM_SEARCH)); 772 memcpy(p_dest_data->disc_res.p_raw_data, 773 p_src_data->disc_res.p_raw_data, p_src_data->disc_res.raw_data_size); 774 } 775 } 776 break; 777 } 778} 779 780static void search_services_copy_cb(UINT16 event, char *p_dest, char *p_src) 781{ 782 tBTA_DM_SEARCH *p_dest_data = (tBTA_DM_SEARCH *) p_dest; 783 tBTA_DM_SEARCH *p_src_data = (tBTA_DM_SEARCH *) p_src; 784 785 if (!p_src) 786 return; 787 memcpy(p_dest_data, p_src_data, sizeof(tBTA_DM_SEARCH)); 788 switch (event) 789 { 790 case BTA_DM_DISC_RES_EVT: 791 { 792 if (p_src_data->disc_res.result == BTA_SUCCESS) 793 { 794 if (p_src_data->disc_res.num_uuids > 0) 795 { 796 p_dest_data->disc_res.p_uuid_list = 797 (UINT8*)(p_dest + sizeof(tBTA_DM_SEARCH)); 798 memcpy(p_dest_data->disc_res.p_uuid_list, p_src_data->disc_res.p_uuid_list, 799 p_src_data->disc_res.num_uuids*MAX_UUID_SIZE); 800 GKI_freebuf(p_src_data->disc_res.p_uuid_list); 801 } 802 if (p_src_data->disc_res.p_raw_data != NULL) 803 { 804 GKI_freebuf(p_src_data->disc_res.p_raw_data); 805 } 806 } 807 } break; 808 } 809} 810/****************************************************************************** 811** 812** BTIF DM callback events 813** 814*****************************************************************************/ 815 816/******************************************************************************* 817** 818** Function btif_dm_pin_req_evt 819** 820** Description Executes pin request event in btif context 821** 822** Returns void 823** 824*******************************************************************************/ 825static void btif_dm_pin_req_evt(tBTA_DM_PIN_REQ *p_pin_req) 826{ 827 bt_bdaddr_t bd_addr; 828 bt_bdname_t bd_name; 829 UINT32 cod; 830 bt_pin_code_t pin_code; 831 int dev_type; 832 833 /* Remote properties update */ 834 if (!btif_get_device_type(p_pin_req->bd_addr, &dev_type)) 835 { 836 dev_type = BT_DEVICE_TYPE_BREDR; 837 } 838 btif_update_remote_properties(p_pin_req->bd_addr, p_pin_req->bd_name, 839 p_pin_req->dev_class, (tBT_DEVICE_TYPE) dev_type); 840 841 bdcpy(bd_addr.address, p_pin_req->bd_addr); 842 memcpy(bd_name.name, p_pin_req->bd_name, BD_NAME_LEN); 843 844 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 845 846 cod = devclass2uint(p_pin_req->dev_class); 847 848 if ( cod == 0) { 849 BTIF_TRACE_DEBUG("%s():cod is 0, set as unclassified", __FUNCTION__); 850 cod = COD_UNCLASSIFIED; 851 } 852 853 /* check for auto pair possiblity only if bond was initiated by local device */ 854 if (pairing_cb.is_local_initiated) 855 { 856 if (check_cod(&bd_addr, COD_AV_HEADSETS) || 857 check_cod(&bd_addr, COD_AV_HANDSFREE) || 858 check_cod(&bd_addr, COD_AV_HEADPHONES) || 859 check_cod(&bd_addr, COD_AV_PORTABLE_AUDIO) || 860 check_cod(&bd_addr, COD_AV_HIFI_AUDIO) || 861 check_cod(&bd_addr, COD_HID_POINTING)) 862 { 863 BTIF_TRACE_DEBUG("%s()cod matches for auto pair", __FUNCTION__); 864 /* Check if this device can be auto paired */ 865 if ((btif_storage_is_device_autopair_blacklisted(&bd_addr) == FALSE) && 866 (pairing_cb.autopair_attempts == 0)) 867 { 868 BTIF_TRACE_DEBUG("%s() Attempting auto pair", __FUNCTION__); 869 pin_code.pin[0] = 0x30; 870 pin_code.pin[1] = 0x30; 871 pin_code.pin[2] = 0x30; 872 pin_code.pin[3] = 0x30; 873 874 pairing_cb.autopair_attempts++; 875 BTA_DmPinReply( (UINT8*)bd_addr.address, TRUE, 4, pin_code.pin); 876 return; 877 } 878 } 879 else if (check_cod(&bd_addr, COD_HID_KEYBOARD) || 880 check_cod(&bd_addr, COD_HID_COMBO)) 881 { 882 if(( btif_storage_is_fixed_pin_zeros_keyboard (&bd_addr) == TRUE) && 883 (pairing_cb.autopair_attempts == 0)) 884 { 885 BTIF_TRACE_DEBUG("%s() Attempting auto pair", __FUNCTION__); 886 pin_code.pin[0] = 0x30; 887 pin_code.pin[1] = 0x30; 888 pin_code.pin[2] = 0x30; 889 pin_code.pin[3] = 0x30; 890 891 pairing_cb.autopair_attempts++; 892 BTA_DmPinReply( (UINT8*)bd_addr.address, TRUE, 4, pin_code.pin); 893 return; 894 } 895 } 896 } 897 HAL_CBACK(bt_hal_cbacks, pin_request_cb, 898 &bd_addr, &bd_name, cod); 899} 900 901/******************************************************************************* 902** 903** Function btif_dm_ssp_cfm_req_evt 904** 905** Description Executes SSP confirm request event in btif context 906** 907** Returns void 908** 909*******************************************************************************/ 910static void btif_dm_ssp_cfm_req_evt(tBTA_DM_SP_CFM_REQ *p_ssp_cfm_req) 911{ 912 bt_bdaddr_t bd_addr; 913 bt_bdname_t bd_name; 914 UINT32 cod; 915 BOOLEAN is_incoming = !(pairing_cb.state == BT_BOND_STATE_BONDING); 916 int dev_type; 917 918 BTIF_TRACE_DEBUG("%s", __FUNCTION__); 919 920 /* Remote properties update */ 921 if (!btif_get_device_type(p_ssp_cfm_req->bd_addr, &dev_type)) 922 { 923 dev_type = BT_DEVICE_TYPE_BREDR; 924 } 925 btif_update_remote_properties(p_ssp_cfm_req->bd_addr, p_ssp_cfm_req->bd_name, 926 p_ssp_cfm_req->dev_class, (tBT_DEVICE_TYPE) dev_type); 927 928 bdcpy(bd_addr.address, p_ssp_cfm_req->bd_addr); 929 memcpy(bd_name.name, p_ssp_cfm_req->bd_name, BD_NAME_LEN); 930 931 /* Set the pairing_cb based on the local & remote authentication requirements */ 932 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 933 934 /* if just_works and bonding bit is not set treat this as temporary */ 935 if (p_ssp_cfm_req->just_works && !(p_ssp_cfm_req->loc_auth_req & BTM_AUTH_BONDS) && 936 !(p_ssp_cfm_req->rmt_auth_req & BTM_AUTH_BONDS) && 937 !(check_cod((bt_bdaddr_t*)&p_ssp_cfm_req->bd_addr, COD_HID_POINTING))) 938 pairing_cb.bond_type = BOND_TYPE_TEMPORARY; 939 else 940 pairing_cb.bond_type = BOND_TYPE_PERSISTENT; 941 942 pairing_cb.is_ssp = TRUE; 943 944 /* If JustWorks auto-accept */ 945 if (p_ssp_cfm_req->just_works) 946 { 947 /* Pairing consent for JustWorks needed if: 948 * 1. Incoming pairing is detected AND 949 * 2. local IO capabilities are DisplayYesNo AND 950 * 3. remote IO capabiltiies are DisplayOnly or NoInputNoOutput; 951 */ 952 if ((is_incoming) && ((p_ssp_cfm_req->loc_io_caps == 0x01) && 953 (p_ssp_cfm_req->rmt_io_caps == 0x00 || p_ssp_cfm_req->rmt_io_caps == 0x03))) 954 { 955 BTIF_TRACE_EVENT("%s: User consent needed for incoming pairing request. loc_io_caps: %d, rmt_io_caps: %d", 956 __FUNCTION__, p_ssp_cfm_req->loc_io_caps, p_ssp_cfm_req->rmt_io_caps); 957 } 958 else 959 { 960 BTIF_TRACE_EVENT("%s: Auto-accept JustWorks pairing", __FUNCTION__); 961 btif_dm_ssp_reply(&bd_addr, BT_SSP_VARIANT_CONSENT, TRUE, 0); 962 return; 963 } 964 } 965 966 cod = devclass2uint(p_ssp_cfm_req->dev_class); 967 968 if ( cod == 0) { 969 ALOGD("cod is 0, set as unclassified"); 970 cod = COD_UNCLASSIFIED; 971 } 972 973 pairing_cb.sdp_attempts = 0; 974 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 975 (p_ssp_cfm_req->just_works ? BT_SSP_VARIANT_CONSENT : BT_SSP_VARIANT_PASSKEY_CONFIRMATION), 976 p_ssp_cfm_req->num_val); 977} 978 979static void btif_dm_ssp_key_notif_evt(tBTA_DM_SP_KEY_NOTIF *p_ssp_key_notif) 980{ 981 bt_bdaddr_t bd_addr; 982 bt_bdname_t bd_name; 983 UINT32 cod; 984 int dev_type; 985 986 BTIF_TRACE_DEBUG("%s", __FUNCTION__); 987 988 /* Remote properties update */ 989 if (!btif_get_device_type(p_ssp_key_notif->bd_addr, &dev_type)) 990 { 991 dev_type = BT_DEVICE_TYPE_BREDR; 992 } 993 btif_update_remote_properties(p_ssp_key_notif->bd_addr, p_ssp_key_notif->bd_name, 994 p_ssp_key_notif->dev_class, (tBT_DEVICE_TYPE) dev_type); 995 996 bdcpy(bd_addr.address, p_ssp_key_notif->bd_addr); 997 memcpy(bd_name.name, p_ssp_key_notif->bd_name, BD_NAME_LEN); 998 999 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 1000 pairing_cb.is_ssp = TRUE; 1001 cod = devclass2uint(p_ssp_key_notif->dev_class); 1002 1003 if ( cod == 0) { 1004 ALOGD("cod is 0, set as unclassified"); 1005 cod = COD_UNCLASSIFIED; 1006 } 1007 1008 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, 1009 cod, BT_SSP_VARIANT_PASSKEY_NOTIFICATION, 1010 p_ssp_key_notif->passkey); 1011} 1012/******************************************************************************* 1013** 1014** Function btif_dm_auth_cmpl_evt 1015** 1016** Description Executes authentication complete event in btif context 1017** 1018** Returns void 1019** 1020*******************************************************************************/ 1021static void btif_dm_auth_cmpl_evt (tBTA_DM_AUTH_CMPL *p_auth_cmpl) 1022{ 1023 /* Save link key, if not temporary */ 1024 bt_bdaddr_t bd_addr; 1025 bt_status_t status = BT_STATUS_FAIL; 1026 bt_bond_state_t state = BT_BOND_STATE_NONE; 1027 BOOLEAN skip_sdp = FALSE; 1028 1029 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 1030 if ( (p_auth_cmpl->success == TRUE) && (p_auth_cmpl->key_present) ) 1031 { 1032 if ((p_auth_cmpl->key_type < HCI_LKEY_TYPE_DEBUG_COMB) || (p_auth_cmpl->key_type == HCI_LKEY_TYPE_AUTH_COMB) || 1033 (p_auth_cmpl->key_type == HCI_LKEY_TYPE_CHANGED_COMB) || pairing_cb.bond_type == BOND_TYPE_PERSISTENT) 1034 { 1035 bt_status_t ret; 1036 BTIF_TRACE_DEBUG("%s: Storing link key. key_type=0x%x, bond_type=%d", 1037 __FUNCTION__, p_auth_cmpl->key_type, pairing_cb.bond_type); 1038 ret = btif_storage_add_bonded_device(&bd_addr, 1039 p_auth_cmpl->key, p_auth_cmpl->key_type, 1040 pairing_cb.pin_code_len); 1041 ASSERTC(ret == BT_STATUS_SUCCESS, "storing link key failed", ret); 1042 } 1043 else 1044 { 1045 BTIF_TRACE_DEBUG("%s: Temporary key. Not storing. key_type=0x%x, bond_type=%d", 1046 __FUNCTION__, p_auth_cmpl->key_type, pairing_cb.bond_type); 1047 if(pairing_cb.bond_type == BOND_TYPE_TEMPORARY) 1048 { 1049 BTIF_TRACE_DEBUG("%s: sending BT_BOND_STATE_NONE for Temp pairing", 1050 __FUNCTION__); 1051 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_NONE); 1052 return; 1053 } 1054 } 1055 } 1056 1057 // Skip SDP for certain HID Devices 1058 if (p_auth_cmpl->success) 1059 { 1060 pairing_cb.timeout_retries = 0; 1061 status = BT_STATUS_SUCCESS; 1062 state = BT_BOND_STATE_BONDED; 1063 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 1064 1065 if (check_sdp_bl(&bd_addr) && check_cod_hid(&bd_addr, COD_HID_MAJOR)) 1066 { 1067 ALOGW("%s:skip SDP", 1068 __FUNCTION__); 1069 skip_sdp = TRUE; 1070 } 1071 if(!pairing_cb.is_local_initiated && skip_sdp) 1072 { 1073 bond_state_changed(status, &bd_addr, state); 1074 1075 ALOGW("%s: Incoming HID Connection",__FUNCTION__); 1076 bt_property_t prop; 1077 bt_bdaddr_t bd_addr; 1078 bt_uuid_t uuid; 1079 char uuid_str[128] = UUID_HUMAN_INTERFACE_DEVICE; 1080 1081 string_to_uuid(uuid_str, &uuid); 1082 1083 prop.type = BT_PROPERTY_UUIDS; 1084 prop.val = uuid.uu; 1085 prop.len = MAX_UUID_SIZE; 1086 1087 /* Send the event to the BTIF */ 1088 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 1089 BT_STATUS_SUCCESS, &bd_addr, 1, &prop); 1090 } 1091 else 1092 { 1093 /* Trigger SDP on the device */ 1094 pairing_cb.sdp_attempts = 1;; 1095 1096 if(btif_dm_inquiry_in_progress) 1097 btif_dm_cancel_discovery(); 1098 1099 btif_dm_get_remote_services(&bd_addr); 1100 } 1101 /* Do not call bond_state_changed_cb yet. Wait till fetch remote service is complete */ 1102 } 1103 else 1104 { 1105 /*Map the HCI fail reason to bt status */ 1106 switch(p_auth_cmpl->fail_reason) 1107 { 1108 case HCI_ERR_PAGE_TIMEOUT: 1109 if (blacklistPairingRetries(bd_addr.address) && pairing_cb.timeout_retries) 1110 { 1111 BTIF_TRACE_WARNING("%s() - Pairing timeout; retrying (%d) ...", __FUNCTION__, pairing_cb.timeout_retries); 1112 --pairing_cb.timeout_retries; 1113 btif_dm_cb_create_bond (&bd_addr, BTA_TRANSPORT_UNKNOWN); 1114 return; 1115 } 1116 /* Fall-through */ 1117 case HCI_ERR_CONNECTION_TOUT: 1118 status = BT_STATUS_RMT_DEV_DOWN; 1119 break; 1120 1121 case HCI_ERR_PAIRING_NOT_ALLOWED: 1122 status = BT_STATUS_AUTH_REJECTED; 1123 break; 1124 1125 case HCI_ERR_LMP_RESPONSE_TIMEOUT: 1126 status = BT_STATUS_AUTH_FAILURE; 1127 break; 1128 1129 /* map the auth failure codes, so we can retry pairing if necessary */ 1130 case HCI_ERR_AUTH_FAILURE: 1131 case HCI_ERR_KEY_MISSING: 1132 btif_storage_remove_bonded_device(&bd_addr); 1133 case HCI_ERR_HOST_REJECT_SECURITY: 1134 case HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE: 1135 case HCI_ERR_UNIT_KEY_USED: 1136 case HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED: 1137 case HCI_ERR_INSUFFCIENT_SECURITY: 1138 case HCI_ERR_PEER_USER: 1139 case HCI_ERR_UNSPECIFIED: 1140 BTIF_TRACE_DEBUG(" %s() Authentication fail reason %d", 1141 __FUNCTION__, p_auth_cmpl->fail_reason); 1142 if (pairing_cb.autopair_attempts == 1) 1143 { 1144 BTIF_TRACE_DEBUG("%s(): Adding device to blacklist ", __FUNCTION__); 1145 1146 /* Add the device to dynamic black list only if this device belongs to Audio/pointing dev class */ 1147 if (check_cod(&bd_addr, COD_AV_HEADSETS) || 1148 check_cod(&bd_addr, COD_AV_HANDSFREE) || 1149 check_cod(&bd_addr, COD_AV_HEADPHONES) || 1150 check_cod(&bd_addr, COD_AV_PORTABLE_AUDIO) || 1151 check_cod(&bd_addr, COD_AV_HIFI_AUDIO) || 1152 check_cod(&bd_addr, COD_HID_POINTING)) 1153 { 1154 btif_storage_add_device_to_autopair_blacklist (&bd_addr); 1155 } 1156 pairing_cb.autopair_attempts++; 1157 1158 /* Create the Bond once again */ 1159 BTIF_TRACE_DEBUG("%s() auto pair failed. Reinitiate Bond", __FUNCTION__); 1160 btif_dm_cb_create_bond (&bd_addr, BTA_TRANSPORT_UNKNOWN); 1161 return; 1162 } 1163 else 1164 { 1165 /* if autopair attempts are more than 1, or not attempted */ 1166 status = BT_STATUS_AUTH_FAILURE; 1167 } 1168 break; 1169 1170 default: 1171 status = BT_STATUS_FAIL; 1172 } 1173 /* Special Handling for HID Devices */ 1174 if (check_cod(&bd_addr, COD_HID_POINTING)) { 1175 /* Remove Device as bonded in nvram as authentication failed */ 1176 BTIF_TRACE_DEBUG("%s(): removing hid pointing device from nvram", __FUNCTION__); 1177 btif_storage_remove_bonded_device(&bd_addr); 1178 } 1179 bond_state_changed(status, &bd_addr, state); 1180 } 1181} 1182 1183/****************************************************************************** 1184** 1185** Function btif_dm_search_devices_evt 1186** 1187** Description Executes search devices callback events in btif context 1188** 1189** Returns void 1190** 1191******************************************************************************/ 1192static void btif_dm_search_devices_evt (UINT16 event, char *p_param) 1193{ 1194 tBTA_DM_SEARCH *p_search_data; 1195 BTIF_TRACE_EVENT("%s event=%s", __FUNCTION__, dump_dm_search_event(event)); 1196 1197 switch (event) 1198 { 1199 case BTA_DM_DISC_RES_EVT: 1200 { 1201 p_search_data = (tBTA_DM_SEARCH *)p_param; 1202 /* Remote name update */ 1203 if (strlen((const char *) p_search_data->disc_res.bd_name)) 1204 { 1205 bt_property_t properties[1]; 1206 bt_bdaddr_t bdaddr; 1207 bt_status_t status; 1208 1209 properties[0].type = BT_PROPERTY_BDNAME; 1210 properties[0].val = p_search_data->disc_res.bd_name; 1211 properties[0].len = strlen((char *)p_search_data->disc_res.bd_name); 1212 bdcpy(bdaddr.address, p_search_data->disc_res.bd_addr); 1213 1214 status = btif_storage_set_remote_device_property(&bdaddr, &properties[0]); 1215 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device property", status); 1216 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 1217 status, &bdaddr, 1, properties); 1218 } 1219 /* TODO: Services? */ 1220 } 1221 break; 1222 1223 case BTA_DM_INQ_RES_EVT: 1224 { 1225 /* inquiry result */ 1226 UINT32 cod; 1227 UINT8 *p_eir_remote_name = NULL; 1228 bt_bdname_t bdname; 1229 bt_bdaddr_t bdaddr; 1230 UINT8 remote_name_len; 1231 UINT8 *p_cached_name = NULL; 1232 tBTA_SERVICE_MASK services = 0; 1233 bdstr_t bdstr; 1234 1235 p_search_data = (tBTA_DM_SEARCH *)p_param; 1236 bdcpy(bdaddr.address, p_search_data->inq_res.bd_addr); 1237 1238 BTIF_TRACE_DEBUG("%s() %s device_type = 0x%x\n", __FUNCTION__, bd2str(&bdaddr, &bdstr), 1239#if (BLE_INCLUDED == TRUE) 1240 p_search_data->inq_res.device_type); 1241#else 1242 BT_DEVICE_TYPE_BREDR); 1243#endif 1244 bdname.name[0] = 0; 1245 1246 cod = devclass2uint (p_search_data->inq_res.dev_class); 1247 1248 if ( cod == 0) { 1249 ALOGD("cod is 0, set as unclassified"); 1250 cod = COD_UNCLASSIFIED; 1251 } 1252 1253 if (!check_eir_remote_name(p_search_data, bdname.name, &remote_name_len)) 1254 check_cached_remote_name(p_search_data, bdname.name, &remote_name_len); 1255 1256 /* Check EIR for remote name and services */ 1257 if (p_search_data->inq_res.p_eir) 1258 { 1259 BTA_GetEirService(p_search_data->inq_res.p_eir, &services); 1260 BTIF_TRACE_DEBUG("%s()EIR BTA services = %08X", __FUNCTION__, (UINT32)services); 1261 /* TODO: Get the service list and check to see which uuids we got and send it back to the client. */ 1262 } 1263 1264 1265 { 1266 bt_property_t properties[5]; 1267 bt_device_type_t dev_type; 1268 UINT8 addr_type; 1269 uint32_t num_properties = 0; 1270 bt_status_t status; 1271 1272 memset(properties, 0, sizeof(properties)); 1273 /* BD_ADDR */ 1274 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1275 BT_PROPERTY_BDADDR, sizeof(bdaddr), &bdaddr); 1276 num_properties++; 1277 /* BD_NAME */ 1278 /* Don't send BDNAME if it is empty */ 1279 if (bdname.name[0]) 1280 { 1281 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1282 BT_PROPERTY_BDNAME, 1283 strlen((char *)bdname.name), &bdname); 1284 num_properties++; 1285 } 1286 1287 /* DEV_CLASS */ 1288 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1289 BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod); 1290 num_properties++; 1291 /* DEV_TYPE */ 1292#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1293 /* FixMe: Assumption is that bluetooth.h and BTE enums match */ 1294 dev_type = p_search_data->inq_res.device_type; 1295 addr_type = p_search_data->inq_res.ble_addr_type; 1296#else 1297 dev_type = BT_DEVICE_TYPE_BREDR; 1298#endif 1299 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1300 BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), &dev_type); 1301 num_properties++; 1302 /* RSSI */ 1303 BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties], 1304 BT_PROPERTY_REMOTE_RSSI, sizeof(int8_t), 1305 &(p_search_data->inq_res.rssi)); 1306 num_properties++; 1307 1308 status = btif_storage_add_remote_device(&bdaddr, num_properties, properties); 1309 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device (inquiry)", status); 1310#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1311 status = btif_storage_set_remote_addr_type(&bdaddr, addr_type); 1312 if (( dev_type == BT_DEVICE_TYPE_DUMO)&& 1313 (p_search_data->inq_res.flag & BTA_BLE_DMT_CONTROLLER_SPT) && 1314 (p_search_data->inq_res.flag & BTA_BLE_DMT_HOST_SPT)) 1315 { 1316 btif_storage_set_dmt_support_type (&bdaddr, TRUE); 1317 } 1318 ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote addr type (inquiry)", status); 1319#endif 1320 /* Callback to notify upper layer of device */ 1321 HAL_CBACK(bt_hal_cbacks, device_found_cb, 1322 num_properties, properties); 1323 } 1324 } 1325 break; 1326 1327 case BTA_DM_INQ_CMPL_EVT: 1328 { 1329#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1330 tBTA_DM_BLE_PF_FILT_PARAMS adv_filt_param; 1331 memset(&adv_filt_param, 0, sizeof(tBTA_DM_BLE_PF_FILT_PARAMS)); 1332 BTA_DmBleScanFilterSetup(BTA_DM_BLE_SCAN_COND_DELETE, 0, &adv_filt_param, NULL, 1333 bte_scan_filt_param_cfg_evt, 0); 1334#endif 1335 } 1336 break; 1337 case BTA_DM_DISC_CMPL_EVT: 1338 { 1339 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STOPPED); 1340 } 1341 break; 1342 case BTA_DM_SEARCH_CANCEL_CMPL_EVT: 1343 { 1344 /* if inquiry is not in progress and we get a cancel event, then 1345 * it means we are done with inquiry, but remote_name fetches are in 1346 * progress 1347 * 1348 * if inquiry is in progress, then we don't want to act on this cancel_cmpl_evt 1349 * but instead wait for the cancel_cmpl_evt via the Busy Level 1350 * 1351 */ 1352 if (btif_dm_inquiry_in_progress == FALSE) 1353 { 1354 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STOPPED); 1355 } 1356 } 1357 break; 1358 } 1359} 1360 1361/******************************************************************************* 1362** 1363** Function btif_dm_search_services_evt 1364** 1365** Description Executes search services event in btif context 1366** 1367** Returns void 1368** 1369*******************************************************************************/ 1370static void btif_dm_search_services_evt(UINT16 event, char *p_param) 1371{ 1372 tBTA_DM_SEARCH *p_data = (tBTA_DM_SEARCH*)p_param; 1373 1374 BTIF_TRACE_EVENT("%s: event = %d", __FUNCTION__, event); 1375 switch (event) 1376 { 1377 case BTA_DM_DISC_RES_EVT: 1378 { 1379 bt_uuid_t uuid_arr[BT_MAX_NUM_UUIDS]; /* Max 32 services */ 1380 bt_property_t prop; 1381 uint32_t i = 0, j = 0; 1382 bt_bdaddr_t bd_addr; 1383 bt_status_t ret; 1384 1385 bdcpy(bd_addr.address, p_data->disc_res.bd_addr); 1386 1387 BTIF_TRACE_DEBUG("%s:(result=0x%x, services 0x%x)", __FUNCTION__, 1388 p_data->disc_res.result, p_data->disc_res.services); 1389 if ((p_data->disc_res.result != BTA_SUCCESS) && 1390 (pairing_cb.state == BT_BOND_STATE_BONDING ) && 1391 (pairing_cb.sdp_attempts < BTIF_DM_MAX_SDP_ATTEMPTS_AFTER_PAIRING)) 1392 { 1393 BTIF_TRACE_WARNING("%s:SDP failed after bonding re-attempting", __FUNCTION__); 1394 pairing_cb.sdp_attempts++; 1395 btif_dm_get_remote_services(&bd_addr); 1396 return; 1397 } 1398 prop.type = BT_PROPERTY_UUIDS; 1399 prop.len = 0; 1400 if ((p_data->disc_res.result == BTA_SUCCESS) && (p_data->disc_res.num_uuids > 0)) 1401 { 1402 prop.val = p_data->disc_res.p_uuid_list; 1403 prop.len = p_data->disc_res.num_uuids * MAX_UUID_SIZE; 1404 for (i=0; i < p_data->disc_res.num_uuids; i++) 1405 { 1406 char temp[256]; 1407 uuid_to_string((bt_uuid_t*)(p_data->disc_res.p_uuid_list + (i*MAX_UUID_SIZE)), temp); 1408 BTIF_TRACE_ERROR("Index: %d uuid:%s", i, temp); 1409 } 1410 } 1411 1412 /* onUuidChanged requires getBondedDevices to be populated. 1413 ** bond_state_changed needs to be sent prior to remote_device_property 1414 */ 1415 if ((pairing_cb.state == BT_BOND_STATE_BONDING) && 1416 (bdcmp(p_data->disc_res.bd_addr, pairing_cb.bd_addr) == 0)&& 1417 pairing_cb.sdp_attempts > 0) 1418 { 1419 BTIF_TRACE_DEBUG("%s Remote Service SDP done. Call bond_state_changed_cb BONDED", 1420 __FUNCTION__); 1421 pairing_cb.sdp_attempts = 0; 1422 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDED); 1423 } 1424 1425 if(p_data->disc_res.num_uuids != 0) 1426 { 1427 /* Also write this to the NVRAM */ 1428 ret = btif_storage_set_remote_device_property(&bd_addr, &prop); 1429 ASSERTC(ret == BT_STATUS_SUCCESS, "storing remote services failed", ret); 1430 /* Send the event to the BTIF */ 1431 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 1432 BT_STATUS_SUCCESS, &bd_addr, 1, &prop); 1433 } 1434 } 1435 break; 1436 1437 case BTA_DM_DISC_CMPL_EVT: 1438 /* fixme */ 1439 break; 1440 1441#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1442 case BTA_DM_DISC_BLE_RES_EVT: 1443 BTIF_TRACE_DEBUG("%s:, services 0x%x)", __FUNCTION__, 1444 p_data->disc_ble_res.service.uu.uuid16); 1445 bt_uuid_t uuid; 1446 int i = 0; 1447 int j = 15; 1448 if (p_data->disc_ble_res.service.uu.uuid16 == UUID_SERVCLASS_LE_HID) 1449 { 1450 BTIF_TRACE_DEBUG("%s: Found HOGP UUID",__FUNCTION__); 1451 bt_property_t prop; 1452 bt_bdaddr_t bd_addr; 1453 char temp[256]; 1454 bt_status_t ret; 1455 1456 bta_gatt_convert_uuid16_to_uuid128(uuid.uu,p_data->disc_ble_res.service.uu.uuid16); 1457 1458 while(i < j ) 1459 { 1460 unsigned char c = uuid.uu[j]; 1461 uuid.uu[j] = uuid.uu[i]; 1462 uuid.uu[i] = c; 1463 i++; 1464 j--; 1465 } 1466 1467 uuid_to_string(&uuid, temp); 1468 BTIF_TRACE_ERROR(" uuid:%s", temp); 1469 1470 bdcpy(bd_addr.address, p_data->disc_ble_res.bd_addr); 1471 prop.type = BT_PROPERTY_UUIDS; 1472 prop.val = uuid.uu; 1473 prop.len = MAX_UUID_SIZE; 1474 1475 /* Also write this to the NVRAM */ 1476 ret = btif_storage_set_remote_device_property(&bd_addr, &prop); 1477 ASSERTC(ret == BT_STATUS_SUCCESS, "storing remote services failed", ret); 1478 1479 /* Send the event to the BTIF */ 1480 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 1481 BT_STATUS_SUCCESS, &bd_addr, 1, &prop); 1482 1483 } 1484 break; 1485#endif /* BLE_INCLUDED */ 1486 1487 default: 1488 { 1489 ASSERTC(0, "unhandled search services event", event); 1490 } 1491 break; 1492 } 1493} 1494 1495/******************************************************************************* 1496** 1497** Function btif_dm_remote_service_record_evt 1498** 1499** Description Executes search service record event in btif context 1500** 1501** Returns void 1502** 1503*******************************************************************************/ 1504static void btif_dm_remote_service_record_evt(UINT16 event, char *p_param) 1505{ 1506 tBTA_DM_SEARCH *p_data = (tBTA_DM_SEARCH*)p_param; 1507 1508 BTIF_TRACE_EVENT("%s: event = %d", __FUNCTION__, event); 1509 switch (event) 1510 { 1511 case BTA_DM_DISC_RES_EVT: 1512 { 1513 bt_service_record_t rec; 1514 bt_property_t prop; 1515 uint32_t i = 0; 1516 bt_bdaddr_t bd_addr; 1517 1518 memset(&rec, 0, sizeof(bt_service_record_t)); 1519 bdcpy(bd_addr.address, p_data->disc_res.bd_addr); 1520 1521 BTIF_TRACE_DEBUG("%s:(result=0x%x, services 0x%x)", __FUNCTION__, 1522 p_data->disc_res.result, p_data->disc_res.services); 1523 prop.type = BT_PROPERTY_SERVICE_RECORD; 1524 prop.val = (void*)&rec; 1525 prop.len = sizeof(rec); 1526 1527 /* disc_res.result is overloaded with SCN. Cannot check result */ 1528 p_data->disc_res.services &= ~BTA_USER_SERVICE_MASK; 1529 /* TODO: Get the UUID as well */ 1530 rec.channel = p_data->disc_res.result - 3; 1531 /* TODO: Need to get the service name using p_raw_data */ 1532 rec.name[0] = 0; 1533 1534 HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb, 1535 BT_STATUS_SUCCESS, &bd_addr, 1, &prop); 1536 } 1537 break; 1538 1539 default: 1540 { 1541 ASSERTC(0, "unhandled remote service record event", event); 1542 } 1543 break; 1544 } 1545} 1546 1547/******************************************************************************* 1548** 1549** Function btif_dm_upstreams_cback 1550** 1551** Description Executes UPSTREAMS events in btif context 1552** 1553** Returns void 1554** 1555*******************************************************************************/ 1556static void btif_dm_upstreams_evt(UINT16 event, char* p_param) 1557{ 1558 tBTA_DM_SEC_EVT dm_event = (tBTA_DM_SEC_EVT)event; 1559 tBTA_DM_SEC *p_data = (tBTA_DM_SEC*)p_param; 1560 tBTA_SERVICE_MASK service_mask; 1561 uint32_t i; 1562 bt_bdaddr_t bd_addr; 1563 1564 BTIF_TRACE_EVENT("btif_dm_upstreams_cback ev: %s", dump_dm_event(event)); 1565 1566 switch (event) 1567 { 1568 case BTA_DM_ENABLE_EVT: 1569 { 1570 BD_NAME bdname; 1571 bt_status_t status; 1572 bt_property_t prop; 1573 prop.type = BT_PROPERTY_BDNAME; 1574 prop.len = BD_NAME_LEN; 1575 prop.val = (void*)bdname; 1576 1577 status = btif_storage_get_adapter_property(&prop); 1578 if (status == BT_STATUS_SUCCESS) 1579 { 1580 /* A name exists in the storage. Make this the device name */ 1581 BTA_DmSetDeviceName((char*)prop.val); 1582 } 1583 else 1584 { 1585 /* Storage does not have a name yet. 1586 * Use the default name and write it to the chip 1587 */ 1588 BTA_DmSetDeviceName(btif_get_default_local_name()); 1589 } 1590 1591#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1592 /* Enable local privacy */ 1593 BTA_DmBleConfigLocalPrivacy(BLE_LOCAL_PRIVACY_ENABLED); 1594#endif 1595 1596 /* for each of the enabled services in the mask, trigger the profile 1597 * enable */ 1598 service_mask = btif_get_enabled_services_mask(); 1599 for (i=0; i <= BTA_MAX_SERVICE_ID; i++) 1600 { 1601 if (service_mask & 1602 (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i))) 1603 { 1604 btif_in_execute_service_request(i, TRUE); 1605 } 1606 } 1607 /* clear control blocks */ 1608 memset(&pairing_cb, 0, sizeof(btif_dm_pairing_cb_t)); 1609 1610 /* This function will also trigger the adapter_properties_cb 1611 ** and bonded_devices_info_cb 1612 */ 1613 btif_storage_load_bonded_devices(); 1614 1615 btif_storage_load_autopair_device_list(); 1616 1617 btif_enable_bluetooth_evt(p_data->enable.status, p_data->enable.bd_addr); 1618 } 1619 break; 1620 1621 case BTA_DM_DISABLE_EVT: 1622 /* for each of the enabled services in the mask, trigger the profile 1623 * disable */ 1624 service_mask = btif_get_enabled_services_mask(); 1625 for (i=0; i <= BTA_MAX_SERVICE_ID; i++) 1626 { 1627 if (service_mask & 1628 (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i))) 1629 { 1630 btif_in_execute_service_request(i, FALSE); 1631 } 1632 } 1633 btif_disable_bluetooth_evt(); 1634 break; 1635 1636 case BTA_DM_PIN_REQ_EVT: 1637 btif_dm_pin_req_evt(&p_data->pin_req); 1638 break; 1639 1640 case BTA_DM_AUTH_CMPL_EVT: 1641 btif_dm_auth_cmpl_evt(&p_data->auth_cmpl); 1642 break; 1643 1644 case BTA_DM_BOND_CANCEL_CMPL_EVT: 1645 if (pairing_cb.state == BT_BOND_STATE_BONDING) 1646 { 1647 bdcpy(bd_addr.address, pairing_cb.bd_addr); 1648 bond_state_changed(p_data->bond_cancel_cmpl.result, &bd_addr, BT_BOND_STATE_NONE); 1649 } 1650 break; 1651 1652 case BTA_DM_SP_CFM_REQ_EVT: 1653 btif_dm_ssp_cfm_req_evt(&p_data->cfm_req); 1654 break; 1655 case BTA_DM_SP_KEY_NOTIF_EVT: 1656 btif_dm_ssp_key_notif_evt(&p_data->key_notif); 1657 break; 1658 1659 case BTA_DM_DEV_UNPAIRED_EVT: 1660 bdcpy(bd_addr.address, p_data->link_down.bd_addr); 1661 1662 /*special handling for HID devices */ 1663 #if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)) 1664 btif_hh_remove_device(bd_addr); 1665 #endif 1666 #if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1667 btif_storage_remove_ble_bonding_keys(&bd_addr); 1668 #endif 1669 btif_storage_remove_bonded_device(&bd_addr); 1670 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_NONE); 1671 break; 1672 1673 case BTA_DM_BUSY_LEVEL_EVT: 1674 { 1675 1676 if (p_data->busy_level.level_flags & BTM_BL_INQUIRY_PAGING_MASK) 1677 { 1678 if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_STARTED) 1679 { 1680 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1681 BT_DISCOVERY_STARTED); 1682 btif_dm_inquiry_in_progress = TRUE; 1683 } 1684 else if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_CANCELLED) 1685 { 1686 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, 1687 BT_DISCOVERY_STOPPED); 1688 btif_dm_inquiry_in_progress = FALSE; 1689 } 1690 else if (p_data->busy_level.level_flags == BTM_BL_INQUIRY_COMPLETE) 1691 { 1692 btif_dm_inquiry_in_progress = FALSE; 1693 } 1694 } 1695 }break; 1696 1697 case BTA_DM_LINK_UP_EVT: 1698 bdcpy(bd_addr.address, p_data->link_up.bd_addr); 1699 BTIF_TRACE_DEBUG("BTA_DM_LINK_UP_EVT. Sending BT_ACL_STATE_CONNECTED"); 1700 1701 btif_update_remote_version_property(&bd_addr); 1702 1703 HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS, 1704 &bd_addr, BT_ACL_STATE_CONNECTED); 1705 break; 1706 1707 case BTA_DM_LINK_DOWN_EVT: 1708 bdcpy(bd_addr.address, p_data->link_down.bd_addr); 1709 BTIF_TRACE_DEBUG("BTA_DM_LINK_DOWN_EVT. Sending BT_ACL_STATE_DISCONNECTED"); 1710 HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS, 1711 &bd_addr, BT_ACL_STATE_DISCONNECTED); 1712 break; 1713 1714 case BTA_DM_HW_ERROR_EVT: 1715 BTIF_TRACE_ERROR("Received H/W Error. "); 1716 /* Flush storage data */ 1717 btif_config_flush(); 1718 usleep(100000); /* 100milliseconds */ 1719 /* Killing the process to force a restart as part of fault tolerance */ 1720 kill(getpid(), SIGKILL); 1721 break; 1722 1723#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1724 case BTA_DM_BLE_KEY_EVT: 1725 BTIF_TRACE_DEBUG("BTA_DM_BLE_KEY_EVT key_type=0x%02x ", p_data->ble_key.key_type); 1726 1727 /* If this pairing is by-product of local initiated GATT client Read or Write, 1728 BTA would not have sent BTA_DM_BLE_SEC_REQ_EVT event and Bond state would not 1729 have setup properly. Setup pairing_cb and notify App about Bonding state now*/ 1730 if (pairing_cb.state != BT_BOND_STATE_BONDING) 1731 { 1732 BTIF_TRACE_DEBUG("Bond state not sent to App so far.Notify the app now"); 1733 bond_state_changed(BT_STATUS_SUCCESS, (bt_bdaddr_t*)p_data->ble_key.bd_addr, 1734 BT_BOND_STATE_BONDING); 1735 } 1736 else if (memcmp (pairing_cb.bd_addr, p_data->ble_key.bd_addr, BD_ADDR_LEN)!=0) 1737 { 1738 BTIF_TRACE_ERROR("BD mismatch discard BLE key_type=%d ",p_data->ble_key.key_type); 1739 break; 1740 } 1741 1742 switch (p_data->ble_key.key_type) 1743 { 1744 case BTA_LE_KEY_PENC: 1745 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PENC"); 1746 pairing_cb.ble.is_penc_key_rcvd = TRUE; 1747 memcpy(pairing_cb.ble.penc_key.ltk,p_data->ble_key.key_value.penc_key.ltk, 16); 1748 memcpy(pairing_cb.ble.penc_key.rand, p_data->ble_key.key_value.penc_key.rand,8); 1749 pairing_cb.ble.penc_key.ediv = p_data->ble_key.key_value.penc_key.ediv; 1750 pairing_cb.ble.penc_key.sec_level = p_data->ble_key.key_value.penc_key.sec_level; 1751 1752 for (i=0; i<16; i++) 1753 { 1754 BTIF_TRACE_DEBUG("pairing_cb.ble.penc_key.ltk[%d]=0x%02x",i,pairing_cb.ble.penc_key.ltk[i]); 1755 } 1756 for (i=0; i<8; i++) 1757 { 1758 BTIF_TRACE_DEBUG("pairing_cb.ble.penc_key.rand[%d]=0x%02x",i,pairing_cb.ble.penc_key.rand[i]); 1759 } 1760 BTIF_TRACE_DEBUG("pairing_cb.ble.penc_key.ediv=0x%04x",pairing_cb.ble.penc_key.ediv); 1761 BTIF_TRACE_DEBUG("pairing_cb.ble.penc_key.sec_level=0x%02x",pairing_cb.ble.penc_key.sec_level); 1762 BTIF_TRACE_DEBUG("pairing_cb.ble.penc_key.key_size=0x%02x",pairing_cb.ble.penc_key.key_size); 1763 break; 1764 1765 case BTA_LE_KEY_PID: 1766 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PID"); 1767 pairing_cb.ble.is_pid_key_rcvd = TRUE; 1768 pairing_cb.ble.pid_key.addr_type = p_data->ble_key.key_value.pid_key.addr_type; 1769 memcpy(pairing_cb.ble.pid_key.irk, p_data->ble_key.key_value.pid_key.irk, 16); 1770 memcpy(pairing_cb.ble.pid_key.static_addr, 1771 p_data->ble_key.key_value.pid_key.static_addr,BD_ADDR_LEN); 1772 for (i=0; i<16; i++) 1773 { 1774 BTIF_TRACE_DEBUG("pairing_cb.ble.pid_key.irk[%d]=0x%02x" 1775 ,i,pairing_cb.ble.pid_key.irk[i]); 1776 } 1777 for (i=0; i<BD_ADDR_LEN; i++) 1778 { 1779 BTIF_TRACE_DEBUG("piaring_cb.ble.pid_address[%d] = %x" 1780 ,i, pairing_cb.ble.pid_key.static_addr[i]); 1781 } 1782 break; 1783 1784 case BTA_LE_KEY_PCSRK: 1785 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_PCSRK"); 1786 pairing_cb.ble.is_pcsrk_key_rcvd = TRUE; 1787 pairing_cb.ble.pcsrk_key.counter = p_data->ble_key.key_value.pcsrk_key.counter; 1788 pairing_cb.ble.pcsrk_key.sec_level = p_data->ble_key.key_value.pcsrk_key.sec_level; 1789 memcpy(pairing_cb.ble.pcsrk_key.csrk,p_data->ble_key.key_value.pcsrk_key.csrk,16); 1790 1791 for (i=0; i<16; i++) 1792 { 1793 BTIF_TRACE_DEBUG("pairing_cb.ble.pcsrk_key.csrk[%d]=0x%02x",i,pairing_cb.ble.pcsrk_key.csrk[i]); 1794 } 1795 BTIF_TRACE_DEBUG("pairing_cb.ble.pcsrk_key.counter=0x%08x",pairing_cb.ble.pcsrk_key.counter); 1796 BTIF_TRACE_DEBUG("pairing_cb.ble.pcsrk_key.sec_level=0x%02x",pairing_cb.ble.pcsrk_key.sec_level); 1797 break; 1798 1799 case BTA_LE_KEY_LENC: 1800 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_LENC"); 1801 pairing_cb.ble.is_lenc_key_rcvd = TRUE; 1802 pairing_cb.ble.lenc_key.div = p_data->ble_key.key_value.lenc_key.div; 1803 pairing_cb.ble.lenc_key.key_size = p_data->ble_key.key_value.lenc_key.key_size; 1804 pairing_cb.ble.lenc_key.sec_level = p_data->ble_key.key_value.lenc_key.sec_level; 1805 1806 BTIF_TRACE_DEBUG("pairing_cb.ble.lenc_key.div=0x%04x",pairing_cb.ble.lenc_key.div); 1807 BTIF_TRACE_DEBUG("pairing_cb.ble.lenc_key.key_size=0x%02x",pairing_cb.ble.lenc_key.key_size); 1808 BTIF_TRACE_DEBUG("pairing_cb.ble.lenc_key.sec_level=0x%02x",pairing_cb.ble.lenc_key.sec_level); 1809 break; 1810 1811 1812 1813 case BTA_LE_KEY_LCSRK: 1814 BTIF_TRACE_DEBUG("Rcv BTA_LE_KEY_LCSRK"); 1815 pairing_cb.ble.is_lcsrk_key_rcvd = TRUE; 1816 pairing_cb.ble.lcsrk_key.counter = p_data->ble_key.key_value.lcsrk_key.counter; 1817 pairing_cb.ble.lcsrk_key.div = p_data->ble_key.key_value.lcsrk_key.div; 1818 pairing_cb.ble.lcsrk_key.sec_level = p_data->ble_key.key_value.lcsrk_key.sec_level; 1819 1820 BTIF_TRACE_DEBUG("pairing_cb.ble.lcsrk_key.div=0x%04x",pairing_cb.ble.lcsrk_key.div); 1821 BTIF_TRACE_DEBUG("pairing_cb.ble.lcsrk_key.counter=0x%08x",pairing_cb.ble.lcsrk_key.counter); 1822 BTIF_TRACE_DEBUG("pairing_cb.ble.lcsrk_key.sec_level=0x%02x",pairing_cb.ble.lcsrk_key.sec_level); 1823 1824 break; 1825 1826 default: 1827 BTIF_TRACE_ERROR("unknown BLE key type (0x%02x)", p_data->ble_key.key_type); 1828 break; 1829 } 1830 1831 break; 1832 case BTA_DM_BLE_SEC_REQ_EVT: 1833 BTIF_TRACE_DEBUG("BTA_DM_BLE_SEC_REQ_EVT. "); 1834 btif_dm_ble_sec_req_evt(&p_data->ble_req); 1835 break; 1836 case BTA_DM_BLE_PASSKEY_NOTIF_EVT: 1837 BTIF_TRACE_DEBUG("BTA_DM_BLE_PASSKEY_NOTIF_EVT. "); 1838 btif_dm_ble_key_notif_evt(&p_data->key_notif); 1839 break; 1840 case BTA_DM_BLE_PASSKEY_REQ_EVT: 1841 BTIF_TRACE_DEBUG("BTA_DM_BLE_PASSKEY_REQ_EVT. "); 1842 btif_dm_ble_passkey_req_evt(&p_data->pin_req); 1843 break; 1844 case BTA_DM_BLE_OOB_REQ_EVT: 1845 BTIF_TRACE_DEBUG("BTA_DM_BLE_OOB_REQ_EVT. "); 1846 break; 1847 case BTA_DM_BLE_LOCAL_IR_EVT: 1848 BTIF_TRACE_DEBUG("BTA_DM_BLE_LOCAL_IR_EVT. "); 1849 ble_local_key_cb.is_id_keys_rcvd = TRUE; 1850 memcpy(&ble_local_key_cb.id_keys.irk[0], &p_data->ble_id_keys.irk[0], sizeof(BT_OCTET16)); 1851 memcpy(&ble_local_key_cb.id_keys.ir[0], &p_data->ble_id_keys.ir[0], sizeof(BT_OCTET16)); 1852 memcpy(&ble_local_key_cb.id_keys.dhk[0], &p_data->ble_id_keys.dhk[0], sizeof(BT_OCTET16)); 1853 btif_storage_add_ble_local_key( (char *)&ble_local_key_cb.id_keys.irk[0], 1854 BTIF_DM_LE_LOCAL_KEY_IR, 1855 BT_OCTET16_LEN); 1856 btif_storage_add_ble_local_key( (char *)&ble_local_key_cb.id_keys.ir[0], 1857 BTIF_DM_LE_LOCAL_KEY_IRK, 1858 BT_OCTET16_LEN); 1859 btif_storage_add_ble_local_key( (char *)&ble_local_key_cb.id_keys.dhk[0], 1860 BTIF_DM_LE_LOCAL_KEY_DHK, 1861 BT_OCTET16_LEN); 1862 break; 1863 case BTA_DM_BLE_LOCAL_ER_EVT: 1864 BTIF_TRACE_DEBUG("BTA_DM_BLE_LOCAL_ER_EVT. "); 1865 ble_local_key_cb.is_er_rcvd = TRUE; 1866 memcpy(&ble_local_key_cb.er[0], &p_data->ble_er[0], sizeof(BT_OCTET16)); 1867 btif_storage_add_ble_local_key( (char *)&ble_local_key_cb.er[0], 1868 BTIF_DM_LE_LOCAL_KEY_ER, 1869 BT_OCTET16_LEN); 1870 break; 1871 1872 case BTA_DM_BLE_AUTH_CMPL_EVT: 1873 BTIF_TRACE_DEBUG("BTA_DM_BLE_KEY_EVT. "); 1874 btif_dm_ble_auth_cmpl_evt(&p_data->auth_cmpl); 1875 break; 1876 1877 case BTA_DM_LE_FEATURES_READ: 1878 { 1879 tBTM_BLE_VSC_CB cmn_vsc_cb; 1880 bt_local_le_features_t local_le_features; 1881 char buf[512]; 1882 bt_property_t prop; 1883 prop.type = BT_PROPERTY_LOCAL_LE_FEATURES; 1884 prop.val = (void*)buf; 1885 prop.len = sizeof(buf); 1886 1887 /* LE features are not stored in storage. Should be retrived from stack */ 1888 BTM_BleGetVendorCapabilities(&cmn_vsc_cb); 1889 local_le_features.local_privacy_enabled = BTM_BleLocalPrivacyEnabled(); 1890 1891 prop.len = sizeof (bt_local_le_features_t); 1892 if (cmn_vsc_cb.filter_support == 1) 1893 local_le_features.max_adv_filter_supported = cmn_vsc_cb.max_filter; 1894 else 1895 local_le_features.max_adv_filter_supported = 0; 1896 local_le_features.max_adv_instance = cmn_vsc_cb.adv_inst_max; 1897 local_le_features.max_irk_list_size = cmn_vsc_cb.max_irk_list_sz; 1898 local_le_features.rpa_offload_supported = cmn_vsc_cb.rpa_offloading; 1899 local_le_features.scan_result_storage_size_hibyte = 1900 (cmn_vsc_cb.tot_scan_results_strg >> 8) & (0xFF); 1901 local_le_features.scan_result_storage_size_lobyte = 1902 (cmn_vsc_cb.tot_scan_results_strg) & (0xFF); 1903 local_le_features.activity_energy_info_supported = cmn_vsc_cb.energy_support; 1904 memcpy(prop.val, &local_le_features, prop.len); 1905 HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, BT_STATUS_SUCCESS, 1, &prop); 1906 break; 1907 } 1908 1909 case BTA_DM_ENER_INFO_READ: 1910 { 1911 btif_activity_energy_info_cb_t *p_ener_data = (btif_activity_energy_info_cb_t*) p_param; 1912 bt_activity_energy_info energy_info; 1913 energy_info.status = p_ener_data->status; 1914 energy_info.ctrl_state = p_ener_data->ctrl_state; 1915 energy_info.rx_time = p_ener_data->rx_time; 1916 energy_info.tx_time = p_ener_data->tx_time; 1917 energy_info.idle_time = p_ener_data->idle_time; 1918 energy_info.energy_used = p_ener_data->energy_used; 1919 HAL_CBACK(bt_hal_cbacks, energy_info_cb, &energy_info); 1920 break; 1921 } 1922#endif 1923 1924 case BTA_DM_AUTHORIZE_EVT: 1925 case BTA_DM_SIG_STRENGTH_EVT: 1926 case BTA_DM_SP_RMT_OOB_EVT: 1927 case BTA_DM_SP_KEYPRESS_EVT: 1928 case BTA_DM_ROLE_CHG_EVT: 1929 1930 default: 1931 BTIF_TRACE_WARNING( "btif_dm_cback : unhandled event (%d)", event ); 1932 break; 1933 } 1934} /* btui_security_cback() */ 1935 1936 1937/******************************************************************************* 1938** 1939** Function btif_dm_generic_evt 1940** 1941** Description Executes non-BTA upstream events in BTIF context 1942** 1943** Returns void 1944** 1945*******************************************************************************/ 1946static void btif_dm_generic_evt(UINT16 event, char* p_param) 1947{ 1948 BTIF_TRACE_EVENT("%s: event=%d", __FUNCTION__, event); 1949 switch(event) 1950 { 1951 case BTIF_DM_CB_DISCOVERY_STARTED: 1952 { 1953 HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STARTED); 1954 } 1955 break; 1956 1957 case BTIF_DM_CB_CREATE_BOND: 1958 { 1959 pairing_cb.timeout_retries = NUM_TIMEOUT_RETRIES; 1960 btif_dm_create_bond_cb_t *create_bond_cb = (btif_dm_create_bond_cb_t*)p_param; 1961 btif_dm_cb_create_bond(&create_bond_cb->bdaddr, create_bond_cb->transport); 1962 } 1963 break; 1964 1965 case BTIF_DM_CB_REMOVE_BOND: 1966 { 1967 btif_dm_cb_remove_bond((bt_bdaddr_t *)p_param); 1968 } 1969 break; 1970 1971 case BTIF_DM_CB_HID_REMOTE_NAME: 1972 { 1973 btif_dm_cb_hid_remote_name((tBTM_REMOTE_DEV_NAME *)p_param); 1974 } 1975 break; 1976 1977 case BTIF_DM_CB_BOND_STATE_BONDING: 1978 { 1979 bond_state_changed(BT_STATUS_SUCCESS, (bt_bdaddr_t *)p_param, BT_BOND_STATE_BONDING); 1980 } 1981 break; 1982 case BTIF_DM_CB_LE_TX_TEST: 1983 case BTIF_DM_CB_LE_RX_TEST: 1984 { 1985 uint8_t status; 1986 STREAM_TO_UINT8(status, p_param); 1987 HAL_CBACK(bt_hal_cbacks, le_test_mode_cb, 1988 (status == 0) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL, 0); 1989 } 1990 break; 1991 case BTIF_DM_CB_LE_TEST_END: 1992 { 1993 uint8_t status; 1994 uint16_t count = 0; 1995 STREAM_TO_UINT8(status, p_param); 1996 if (status == 0) 1997 STREAM_TO_UINT16(count, p_param); 1998 HAL_CBACK(bt_hal_cbacks, le_test_mode_cb, 1999 (status == 0) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL, count); 2000 } 2001 break; 2002 default: 2003 { 2004 BTIF_TRACE_WARNING("%s : Unknown event 0x%x", __FUNCTION__, event); 2005 } 2006 break; 2007 } 2008} 2009 2010/******************************************************************************* 2011** 2012** Function bte_dm_evt 2013** 2014** Description Switches context from BTE to BTIF for all DM events 2015** 2016** Returns void 2017** 2018*******************************************************************************/ 2019 2020void bte_dm_evt(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data) 2021{ 2022 bt_status_t status; 2023 2024 /* switch context to btif task context (copy full union size for convenience) */ 2025 status = btif_transfer_context(btif_dm_upstreams_evt, (uint16_t)event, (void*)p_data, sizeof(tBTA_DM_SEC), NULL); 2026 2027 /* catch any failed context transfers */ 2028 ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status); 2029} 2030 2031/******************************************************************************* 2032** 2033** Function bte_search_devices_evt 2034** 2035** Description Switches context from BTE to BTIF for DM search events 2036** 2037** Returns void 2038** 2039*******************************************************************************/ 2040static void bte_search_devices_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data) 2041{ 2042 UINT16 param_len = 0; 2043 2044 if (p_data) 2045 param_len += sizeof(tBTA_DM_SEARCH); 2046 /* Allocate buffer to hold the pointers (deep copy). The pointers will point to the end of the tBTA_DM_SEARCH */ 2047 switch (event) 2048 { 2049 case BTA_DM_INQ_RES_EVT: 2050 { 2051 if (p_data->inq_res.p_eir) 2052 param_len += HCI_EXT_INQ_RESPONSE_LEN; 2053 } 2054 break; 2055 2056 case BTA_DM_DISC_RES_EVT: 2057 { 2058 if (p_data->disc_res.raw_data_size && p_data->disc_res.p_raw_data) 2059 param_len += p_data->disc_res.raw_data_size; 2060 } 2061 break; 2062 } 2063 BTIF_TRACE_DEBUG("%s event=%s param_len=%d", __FUNCTION__, dump_dm_search_event(event), param_len); 2064 2065 /* if remote name is available in EIR, set teh flag so that stack doesnt trigger RNR */ 2066 if (event == BTA_DM_INQ_RES_EVT) 2067 p_data->inq_res.remt_name_not_required = check_eir_remote_name(p_data, NULL, NULL); 2068 2069 btif_transfer_context (btif_dm_search_devices_evt , (UINT16) event, (void *)p_data, param_len, 2070 (param_len > sizeof(tBTA_DM_SEARCH)) ? search_devices_copy_cb : NULL); 2071} 2072 2073/******************************************************************************* 2074** 2075** Function bte_dm_search_services_evt 2076** 2077** Description Switches context from BTE to BTIF for DM search services 2078** event 2079** 2080** Returns void 2081** 2082*******************************************************************************/ 2083static void bte_dm_search_services_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data) 2084{ 2085 UINT16 param_len = 0; 2086 if (p_data) 2087 param_len += sizeof(tBTA_DM_SEARCH); 2088 switch (event) 2089 { 2090 case BTA_DM_DISC_RES_EVT: 2091 { 2092 if ((p_data->disc_res.result == BTA_SUCCESS) && (p_data->disc_res.num_uuids > 0)) { 2093 param_len += (p_data->disc_res.num_uuids * MAX_UUID_SIZE); 2094 } 2095 } break; 2096 } 2097 /* TODO: The only other member that needs a deep copy is the p_raw_data. But not sure 2098 * if raw_data is needed. */ 2099 btif_transfer_context(btif_dm_search_services_evt, event, (char*)p_data, param_len, 2100 (param_len > sizeof(tBTA_DM_SEARCH)) ? search_services_copy_cb : NULL); 2101} 2102 2103/******************************************************************************* 2104** 2105** Function bte_dm_remote_service_record_evt 2106** 2107** Description Switches context from BTE to BTIF for DM search service 2108** record event 2109** 2110** Returns void 2111** 2112*******************************************************************************/ 2113static void bte_dm_remote_service_record_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data) 2114{ 2115 /* TODO: The only member that needs a deep copy is the p_raw_data. But not sure yet if this is needed. */ 2116 btif_transfer_context(btif_dm_remote_service_record_evt, event, (char*)p_data, sizeof(tBTA_DM_SEARCH), NULL); 2117} 2118 2119#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2120/******************************************************************************* 2121** 2122** Function bta_energy_info_cb 2123** 2124** Description Switches context from BTE to BTIF for DM energy info event 2125** 2126** Returns void 2127** 2128*******************************************************************************/ 2129static void bta_energy_info_cb(tBTA_DM_BLE_TX_TIME_MS tx_time, tBTA_DM_BLE_RX_TIME_MS rx_time, 2130 tBTA_DM_BLE_IDLE_TIME_MS idle_time, 2131 tBTA_DM_BLE_ENERGY_USED energy_used, 2132 tBTA_DM_CONTRL_STATE ctrl_state, tBTA_STATUS status) 2133{ 2134 BTIF_TRACE_DEBUG("energy_info_cb-Status:%d,state=%d,tx_t=%ld, rx_t=%ld, idle_time=%ld,used=%ld", 2135 status, ctrl_state, tx_time, rx_time, idle_time, energy_used); 2136 2137 btif_activity_energy_info_cb_t btif_cb; 2138 btif_cb.status = status; 2139 btif_cb.ctrl_state = ctrl_state; 2140 btif_cb.tx_time = (uint64_t) tx_time; 2141 btif_cb.rx_time = (uint64_t) rx_time; 2142 btif_cb.idle_time =(uint64_t) idle_time; 2143 btif_cb.energy_used =(uint64_t) energy_used; 2144 btif_transfer_context(btif_dm_upstreams_evt, BTA_DM_ENER_INFO_READ, 2145 (char*) &btif_cb, sizeof(btif_activity_energy_info_cb_t), NULL); 2146} 2147#endif 2148 2149/******************************************************************************* 2150** 2151** Function bte_scan_filt_param_cfg_evt 2152** 2153** Description Scan filter param config event 2154** 2155** Returns void 2156** 2157*******************************************************************************/ 2158static void bte_scan_filt_param_cfg_evt(UINT8 action_type, 2159 tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, 2160 tBTA_DM_BLE_REF_VALUE ref_value, tBTA_STATUS status) 2161{ 2162 /* This event occurs on calling BTA_DmBleCfgFilterCondition internally, 2163 ** and that is why there is no HAL callback 2164 */ 2165 if(BTA_SUCCESS != status) 2166 { 2167 BTIF_TRACE_ERROR("%s, %d", __FUNCTION__, status); 2168 } 2169 else 2170 { 2171 BTIF_TRACE_DEBUG("%s", __FUNCTION__); 2172 } 2173} 2174 2175/***************************************************************************** 2176** 2177** btif api functions (no context switch) 2178** 2179*****************************************************************************/ 2180 2181/******************************************************************************* 2182** 2183** Function btif_dm_start_discovery 2184** 2185** Description Start device discovery/inquiry 2186** 2187** Returns bt_status_t 2188** 2189*******************************************************************************/ 2190bt_status_t btif_dm_start_discovery(void) 2191{ 2192 tBTA_DM_INQ inq_params; 2193 tBTA_SERVICE_MASK services = 0; 2194 tBTA_DM_BLE_PF_FILT_PARAMS adv_filt_param; 2195 2196 BTIF_TRACE_EVENT("%s", __FUNCTION__); 2197 2198#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2199 memset(&adv_filt_param, 0, sizeof(tBTA_DM_BLE_PF_FILT_PARAMS)); 2200 /* Cleanup anything remaining on index 0 */ 2201 BTA_DmBleScanFilterSetup(BTA_DM_BLE_SCAN_COND_DELETE, 0, &adv_filt_param, NULL, 2202 bte_scan_filt_param_cfg_evt, 0); 2203 2204 /* Add an allow-all filter on index 0*/ 2205 adv_filt_param.dely_mode = IMMEDIATE_DELY_MODE; 2206 adv_filt_param.feat_seln = ALLOW_ALL_FILTER; 2207 adv_filt_param.filt_logic_type = BTA_DM_BLE_PF_FILT_LOGIC_OR; 2208 adv_filt_param.list_logic_type = BTA_DM_BLE_PF_LIST_LOGIC_OR; 2209 adv_filt_param.rssi_low_thres = LOWEST_RSSI_VALUE; 2210 adv_filt_param.rssi_high_thres = LOWEST_RSSI_VALUE; 2211 BTA_DmBleScanFilterSetup(BTA_DM_BLE_SCAN_COND_ADD, 0, &adv_filt_param, NULL, 2212 bte_scan_filt_param_cfg_evt, 0); 2213 2214 /* TODO: Do we need to handle multiple inquiries at the same time? */ 2215 2216 /* Set inquiry params and call API */ 2217 inq_params.mode = BTA_DM_GENERAL_INQUIRY|BTA_BLE_GENERAL_INQUIRY; 2218#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 2219 inq_params.intl_duration[0]= BTIF_DM_INTERLEAVE_DURATION_BR_ONE; 2220 inq_params.intl_duration[1]= BTIF_DM_INTERLEAVE_DURATION_LE_ONE; 2221 inq_params.intl_duration[2]= BTIF_DM_INTERLEAVE_DURATION_BR_TWO; 2222 inq_params.intl_duration[3]= BTIF_DM_INTERLEAVE_DURATION_LE_TWO; 2223#endif 2224#else 2225 inq_params.mode = BTA_DM_GENERAL_INQUIRY; 2226#endif 2227 inq_params.duration = BTIF_DM_DEFAULT_INQ_MAX_DURATION; 2228 2229 inq_params.max_resps = BTIF_DM_DEFAULT_INQ_MAX_RESULTS; 2230 inq_params.report_dup = TRUE; 2231 2232 inq_params.filter_type = BTA_DM_INQ_CLR; 2233 /* TODO: Filter device by BDA needs to be implemented here */ 2234 2235 /* Will be enabled to TRUE once inquiry busy level has been received */ 2236 btif_dm_inquiry_in_progress = FALSE; 2237 /* find nearby devices */ 2238 BTA_DmSearch(&inq_params, services, bte_search_devices_evt); 2239 2240 return BT_STATUS_SUCCESS; 2241} 2242 2243/******************************************************************************* 2244** 2245** Function btif_dm_cancel_discovery 2246** 2247** Description Cancels search 2248** 2249** Returns bt_status_t 2250** 2251*******************************************************************************/ 2252bt_status_t btif_dm_cancel_discovery(void) 2253{ 2254 BTIF_TRACE_EVENT("%s", __FUNCTION__); 2255 BTA_DmSearchCancel(); 2256 return BT_STATUS_SUCCESS; 2257} 2258 2259/******************************************************************************* 2260** 2261** Function btif_dm_create_bond 2262** 2263** Description Initiate bonding with the specified device 2264** 2265** Returns bt_status_t 2266** 2267*******************************************************************************/ 2268bt_status_t btif_dm_create_bond(const bt_bdaddr_t *bd_addr, int transport) 2269{ 2270 btif_dm_create_bond_cb_t create_bond_cb; 2271 create_bond_cb.transport = transport; 2272 bdcpy(create_bond_cb.bdaddr.address, bd_addr->address); 2273 2274 bdstr_t bdstr; 2275 BTIF_TRACE_EVENT("%s: bd_addr=%s, transport=%d", __FUNCTION__, 2276 bd2str((bt_bdaddr_t *) bd_addr, &bdstr), transport); 2277 if (pairing_cb.state != BT_BOND_STATE_NONE) 2278 return BT_STATUS_BUSY; 2279 2280 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_CREATE_BOND, 2281 (char *)&create_bond_cb, sizeof(btif_dm_create_bond_cb_t), NULL); 2282 2283 return BT_STATUS_SUCCESS; 2284} 2285 2286/******************************************************************************* 2287** 2288** Function btif_dm_cancel_bond 2289** 2290** Description Initiate bonding with the specified device 2291** 2292** Returns bt_status_t 2293** 2294*******************************************************************************/ 2295 2296bt_status_t btif_dm_cancel_bond(const bt_bdaddr_t *bd_addr) 2297{ 2298 bdstr_t bdstr; 2299 2300 BTIF_TRACE_EVENT("%s: bd_addr=%s", __FUNCTION__, bd2str((bt_bdaddr_t *)bd_addr, &bdstr)); 2301 2302 /* TODO: 2303 ** 1. Restore scan modes 2304 ** 2. special handling for HID devices 2305 */ 2306 if (pairing_cb.state == BT_BOND_STATE_BONDING) 2307 { 2308 2309#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2310 2311 if (pairing_cb.is_ssp) 2312 { 2313 if (pairing_cb.is_le_only) 2314 { 2315 BTA_DmBleSecurityGrant((UINT8 *)bd_addr->address,BTA_DM_SEC_PAIR_NOT_SPT); 2316 } 2317 else 2318 { 2319 BTA_DmConfirm( (UINT8 *)bd_addr->address, FALSE); 2320 BTA_DmBondCancel ((UINT8 *)bd_addr->address); 2321 btif_storage_remove_bonded_device((bt_bdaddr_t *)bd_addr); 2322 } 2323 } 2324 else 2325 { 2326 if (pairing_cb.is_le_only) 2327 { 2328 BTA_DmBondCancel ((UINT8 *)bd_addr->address); 2329 } 2330 else 2331 { 2332 BTA_DmPinReply( (UINT8 *)bd_addr->address, FALSE, 0, NULL); 2333 } 2334 /* Cancel bonding, in case it is in ACL connection setup state */ 2335 BTA_DmBondCancel ((UINT8 *)bd_addr->address); 2336 } 2337 2338#else 2339 if (pairing_cb.is_ssp) 2340 { 2341 BTA_DmConfirm( (UINT8 *)bd_addr->address, FALSE); 2342 } 2343 else 2344 { 2345 BTA_DmPinReply( (UINT8 *)bd_addr->address, FALSE, 0, NULL); 2346 } 2347 /* Cancel bonding, in case it is in ACL connection setup state */ 2348 BTA_DmBondCancel ((UINT8 *)bd_addr->address); 2349 btif_storage_remove_bonded_device((bt_bdaddr_t *)bd_addr); 2350#endif 2351 } 2352 2353 return BT_STATUS_SUCCESS; 2354} 2355 2356/******************************************************************************* 2357** 2358** Function btif_dm_hh_open_failed 2359** 2360** Description informs the upper layers if the HH have failed during bonding 2361** 2362** Returns none 2363** 2364*******************************************************************************/ 2365 2366void btif_dm_hh_open_failed(bt_bdaddr_t *bdaddr) 2367{ 2368 if (pairing_cb.state == BT_BOND_STATE_BONDING && 2369 bdcmp(bdaddr->address, pairing_cb.bd_addr) == 0) 2370 { 2371 bond_state_changed(BT_STATUS_FAIL, bdaddr, BT_BOND_STATE_NONE); 2372 } 2373} 2374 2375/******************************************************************************* 2376** 2377** Function btif_dm_remove_bond 2378** 2379** Description Removes bonding with the specified device 2380** 2381** Returns bt_status_t 2382** 2383*******************************************************************************/ 2384 2385bt_status_t btif_dm_remove_bond(const bt_bdaddr_t *bd_addr) 2386{ 2387 bdstr_t bdstr; 2388 2389 BTIF_TRACE_EVENT("%s: bd_addr=%s", __FUNCTION__, bd2str((bt_bdaddr_t *)bd_addr, &bdstr)); 2390 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_REMOVE_BOND, 2391 (char *)bd_addr, sizeof(bt_bdaddr_t), NULL); 2392 2393 return BT_STATUS_SUCCESS; 2394} 2395 2396/******************************************************************************* 2397** 2398** Function btif_dm_pin_reply 2399** 2400** Description BT legacy pairing - PIN code reply 2401** 2402** Returns bt_status_t 2403** 2404*******************************************************************************/ 2405 2406bt_status_t btif_dm_pin_reply( const bt_bdaddr_t *bd_addr, uint8_t accept, 2407 uint8_t pin_len, bt_pin_code_t *pin_code) 2408{ 2409 BTIF_TRACE_EVENT("%s: accept=%d", __FUNCTION__, accept); 2410 if (pin_code == NULL) 2411 return BT_STATUS_FAIL; 2412#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2413 2414 if (pairing_cb.is_le_only) 2415 { 2416 int i; 2417 UINT32 passkey = 0; 2418 int multi[] = {100000, 10000, 1000, 100, 10,1}; 2419 BD_ADDR remote_bd_addr; 2420 bdcpy(remote_bd_addr, bd_addr->address); 2421 for (i = 0; i < 6; i++) 2422 { 2423 passkey += (multi[i] * (pin_code->pin[i] - '0')); 2424 } 2425 BTIF_TRACE_DEBUG("btif_dm_pin_reply: passkey: %d", passkey); 2426 BTA_DmBlePasskeyReply(remote_bd_addr, accept, passkey); 2427 2428 } 2429 else 2430 { 2431 BTA_DmPinReply( (UINT8 *)bd_addr->address, accept, pin_len, pin_code->pin); 2432 if (accept) 2433 pairing_cb.pin_code_len = pin_len; 2434 } 2435#else 2436 BTA_DmPinReply( (UINT8 *)bd_addr->address, accept, pin_len, pin_code->pin); 2437 2438 if (accept) 2439 pairing_cb.pin_code_len = pin_len; 2440#endif 2441 return BT_STATUS_SUCCESS; 2442} 2443 2444/******************************************************************************* 2445** 2446** Function btif_dm_ssp_reply 2447** 2448** Description BT SSP Reply - Just Works, Numeric Comparison & Passkey Entry 2449** 2450** Returns bt_status_t 2451** 2452*******************************************************************************/ 2453bt_status_t btif_dm_ssp_reply(const bt_bdaddr_t *bd_addr, 2454 bt_ssp_variant_t variant, uint8_t accept, 2455 uint32_t passkey) 2456{ 2457 UNUSED(passkey); 2458 2459 if (variant == BT_SSP_VARIANT_PASSKEY_ENTRY) 2460 { 2461 /* This is not implemented in the stack. 2462 * For devices with display, this is not needed 2463 */ 2464 BTIF_TRACE_WARNING("%s: Not implemented", __FUNCTION__); 2465 return BT_STATUS_FAIL; 2466 } 2467 /* BT_SSP_VARIANT_CONSENT & BT_SSP_VARIANT_PASSKEY_CONFIRMATION supported */ 2468 BTIF_TRACE_EVENT("%s: accept=%d", __FUNCTION__, accept); 2469#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2470 if (pairing_cb.is_le_only) 2471 { 2472 if (accept) 2473 BTA_DmBleSecurityGrant((UINT8 *)bd_addr->address,BTA_DM_SEC_GRANTED); 2474 else 2475 BTA_DmBleSecurityGrant((UINT8 *)bd_addr->address,BTA_DM_SEC_PAIR_NOT_SPT); 2476 } 2477 else 2478 BTA_DmConfirm( (UINT8 *)bd_addr->address, accept); 2479 2480#else 2481 BTA_DmConfirm( (UINT8 *)bd_addr->address, accept); 2482#endif 2483 return BT_STATUS_SUCCESS; 2484} 2485 2486/******************************************************************************* 2487** 2488** Function btif_dm_get_adapter_property 2489** 2490** Description Queries the BTA for the adapter property 2491** 2492** Returns bt_status_t 2493** 2494*******************************************************************************/ 2495bt_status_t btif_dm_get_adapter_property(bt_property_t *prop) 2496{ 2497 bt_status_t status; 2498 2499 BTIF_TRACE_EVENT("%s: type=0x%x", __FUNCTION__, prop->type); 2500 switch (prop->type) 2501 { 2502 case BT_PROPERTY_BDNAME: 2503 { 2504 bt_bdname_t *bd_name = (bt_bdname_t*)prop->val; 2505 strcpy((char *)bd_name->name, btif_get_default_local_name()); 2506 prop->len = strlen((char *)bd_name->name); 2507 } 2508 break; 2509 2510 case BT_PROPERTY_ADAPTER_SCAN_MODE: 2511 { 2512 /* if the storage does not have it. Most likely app never set it. Default is NONE */ 2513 bt_scan_mode_t *mode = (bt_scan_mode_t*)prop->val; 2514 *mode = BT_SCAN_MODE_NONE; 2515 prop->len = sizeof(bt_scan_mode_t); 2516 } 2517 break; 2518 2519 case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: 2520 { 2521 uint32_t *tmt = (uint32_t*)prop->val; 2522 *tmt = 120; /* default to 120s, if not found in NV */ 2523 prop->len = sizeof(uint32_t); 2524 } 2525 break; 2526 2527 default: 2528 prop->len = 0; 2529 return BT_STATUS_FAIL; 2530 } 2531 return BT_STATUS_SUCCESS; 2532} 2533 2534/******************************************************************************* 2535** 2536** Function btif_dm_get_remote_services 2537** 2538** Description Start SDP to get remote services 2539** 2540** Returns bt_status_t 2541** 2542*******************************************************************************/ 2543bt_status_t btif_dm_get_remote_services(bt_bdaddr_t *remote_addr) 2544{ 2545 bdstr_t bdstr; 2546 2547 BTIF_TRACE_EVENT("%s: remote_addr=%s", __FUNCTION__, bd2str(remote_addr, &bdstr)); 2548 2549 BTA_DmDiscover(remote_addr->address, BTA_ALL_SERVICE_MASK, 2550 bte_dm_search_services_evt, TRUE); 2551 2552 return BT_STATUS_SUCCESS; 2553} 2554 2555/******************************************************************************* 2556** 2557** Function btif_dm_get_remote_service_record 2558** 2559** Description Start SDP to get remote service record 2560** 2561** 2562** Returns bt_status_t 2563*******************************************************************************/ 2564bt_status_t btif_dm_get_remote_service_record(bt_bdaddr_t *remote_addr, 2565 bt_uuid_t *uuid) 2566{ 2567 tSDP_UUID sdp_uuid; 2568 bdstr_t bdstr; 2569 2570 BTIF_TRACE_EVENT("%s: remote_addr=%s", __FUNCTION__, bd2str(remote_addr, &bdstr)); 2571 2572 sdp_uuid.len = MAX_UUID_SIZE; 2573 memcpy(sdp_uuid.uu.uuid128, uuid->uu, MAX_UUID_SIZE); 2574 2575 BTA_DmDiscoverUUID(remote_addr->address, &sdp_uuid, 2576 bte_dm_remote_service_record_evt, TRUE); 2577 2578 return BT_STATUS_SUCCESS; 2579} 2580 2581void btif_dm_execute_service_request(UINT16 event, char *p_param) 2582{ 2583 BOOLEAN b_enable = FALSE; 2584 bt_status_t status; 2585 if (event == BTIF_DM_ENABLE_SERVICE) 2586 { 2587 b_enable = TRUE; 2588 } 2589 status = btif_in_execute_service_request(*((tBTA_SERVICE_ID*)p_param), b_enable); 2590 if (status == BT_STATUS_SUCCESS) 2591 { 2592 bt_property_t property; 2593 bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS]; 2594 2595 /* Now send the UUID_PROPERTY_CHANGED event to the upper layer */ 2596 BTIF_STORAGE_FILL_PROPERTY(&property, BT_PROPERTY_UUIDS, 2597 sizeof(local_uuids), local_uuids); 2598 btif_storage_get_adapter_property(&property); 2599 HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, 2600 BT_STATUS_SUCCESS, 1, &property); 2601 } 2602 return; 2603} 2604 2605void btif_dm_proc_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data, 2606 tBTA_AUTH_REQ *p_auth_req, BOOLEAN is_orig) 2607{ 2608 UINT8 yes_no_bit = BTA_AUTH_SP_YES & *p_auth_req; 2609 /* if local initiated: 2610 ** 1. set DD + MITM 2611 ** if remote initiated: 2612 ** 1. Copy over the auth_req from peer's io_rsp 2613 ** 2. Set the MITM if peer has it set or if peer has DisplayYesNo (iPhone) 2614 ** as a fallback set MITM+GB if peer had MITM set 2615 */ 2616 UNUSED (bd_addr); 2617 UNUSED (p_io_cap); 2618 UNUSED (p_oob_data); 2619 2620 2621 BTIF_TRACE_DEBUG("+%s: p_auth_req=%d", __FUNCTION__, *p_auth_req); 2622 if(pairing_cb.is_local_initiated) 2623 { 2624 /* if initing/responding to a dedicated bonding, use dedicate bonding bit */ 2625 *p_auth_req = BTA_AUTH_DD_BOND | BTA_AUTH_SP_YES; 2626 } 2627 else if (!is_orig) 2628 { 2629 /* peer initiated paring. They probably know what they want. 2630 ** Copy the mitm from peer device. 2631 */ 2632 BTIF_TRACE_DEBUG("%s: setting p_auth_req to peer's: %d", 2633 __FUNCTION__, pairing_cb.auth_req); 2634 *p_auth_req = (pairing_cb.auth_req & BTA_AUTH_BONDS); 2635 2636 /* copy over the MITM bit as well. In addition if the peer has DisplayYesNo, force MITM */ 2637 if ((yes_no_bit) || (pairing_cb.io_cap & BTM_IO_CAP_IO) ) 2638 *p_auth_req |= BTA_AUTH_SP_YES; 2639 } 2640 else if (yes_no_bit) 2641 { 2642 /* set the general bonding bit for stored device */ 2643 *p_auth_req = BTA_AUTH_GEN_BOND | yes_no_bit; 2644 } 2645 BTIF_TRACE_DEBUG("-%s: p_auth_req=%d", __FUNCTION__, *p_auth_req); 2646} 2647 2648void btif_dm_proc_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, 2649 tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req) 2650{ 2651 UNUSED (bd_addr); 2652 UNUSED (oob_data); 2653 2654 if(auth_req & BTA_AUTH_BONDS) 2655 { 2656 BTIF_TRACE_DEBUG("%s auth_req:%d", __FUNCTION__, auth_req); 2657 pairing_cb.auth_req = auth_req; 2658 pairing_cb.io_cap = io_cap; 2659 } 2660} 2661 2662#if (BTM_OOB_INCLUDED == TRUE) 2663void btif_dm_set_oob_for_io_req(tBTA_OOB_DATA *p_oob_data) 2664{ 2665 if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 && 2666 oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 ) 2667 { 2668 *p_oob_data = FALSE; 2669 } 2670 else 2671 { 2672 *p_oob_data = TRUE; 2673 } 2674 BTIF_TRACE_DEBUG("btif_dm_set_oob_for_io_req *p_oob_data=%d", *p_oob_data); 2675} 2676#endif /* BTM_OOB_INCLUDED */ 2677 2678#ifdef BTIF_DM_OOB_TEST 2679void btif_dm_load_local_oob(void) 2680{ 2681 char prop_oob[PROPERTY_VALUE_MAX]; 2682 property_get("service.brcm.bt.oob", prop_oob, "3"); 2683 BTIF_TRACE_DEBUG("btif_dm_load_local_oob prop_oob = %s",prop_oob); 2684 if (prop_oob[0] != '3') 2685 { 2686#if (BTM_OOB_INCLUDED == TRUE) 2687 if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 && 2688 oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 ) 2689 { 2690 BTIF_TRACE_DEBUG("btif_dm_load_local_oob: read OOB, call BTA_DmLocalOob()"); 2691 BTA_DmLocalOob(); 2692 } 2693#else 2694 BTIF_TRACE_ERROR("BTM_OOB_INCLUDED is FALSE!!(btif_dm_load_local_oob)"); 2695#endif 2696 } 2697} 2698 2699void btif_dm_proc_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r) 2700{ 2701 FILE *fp; 2702 char *path_a = "/data/misc/bluedroid/LOCAL/a.key"; 2703 char *path_b = "/data/misc/bluedroid/LOCAL/b.key"; 2704 char *path = NULL; 2705 char prop_oob[PROPERTY_VALUE_MAX]; 2706 BTIF_TRACE_DEBUG("btif_dm_proc_loc_oob: valid=%d", valid); 2707 if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 && 2708 oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 && 2709 valid) 2710 { 2711 BTIF_TRACE_DEBUG("save local OOB data in memory"); 2712 memcpy(oob_cb.sp_c, c, BT_OCTET16_LEN); 2713 memcpy(oob_cb.sp_r, r, BT_OCTET16_LEN); 2714 property_get("service.brcm.bt.oob", prop_oob, "3"); 2715 BTIF_TRACE_DEBUG("btif_dm_proc_loc_oob prop_oob = %s",prop_oob); 2716 if (prop_oob[0] == '1') 2717 path = path_a; 2718 else if (prop_oob[0] == '2') 2719 path = path_b; 2720 if (path) 2721 { 2722 fp = fopen(path, "wb+"); 2723 if (fp == NULL) 2724 { 2725 BTIF_TRACE_DEBUG("btif_dm_proc_loc_oob: failed to save local OOB data to %s", path); 2726 } 2727 else 2728 { 2729 BTIF_TRACE_DEBUG("btif_dm_proc_loc_oob: save local OOB data into file %s",path); 2730 fwrite (c , 1 , BT_OCTET16_LEN , fp ); 2731 fwrite (r , 1 , BT_OCTET16_LEN , fp ); 2732 fclose(fp); 2733 } 2734 } 2735 } 2736} 2737BOOLEAN btif_dm_proc_rmt_oob(BD_ADDR bd_addr, BT_OCTET16 p_c, BT_OCTET16 p_r) 2738{ 2739 char t[128]; 2740 FILE *fp; 2741 char *path_a = "/data/misc/bluedroid/LOCAL/a.key"; 2742 char *path_b = "/data/misc/bluedroid/LOCAL/b.key"; 2743 char *path = NULL; 2744 char prop_oob[PROPERTY_VALUE_MAX]; 2745 BOOLEAN result = FALSE; 2746 bt_bdaddr_t bt_bd_addr; 2747 bdcpy(oob_cb.oob_bdaddr, bd_addr); 2748 property_get("service.brcm.bt.oob", prop_oob, "3"); 2749 BTIF_TRACE_DEBUG("btif_dm_proc_rmt_oob prop_oob = %s",prop_oob); 2750 if (prop_oob[0] == '1') 2751 path = path_b; 2752 else if (prop_oob[0] == '2') 2753 path = path_a; 2754 if (path) 2755 { 2756 fp = fopen(path, "rb"); 2757 if (fp == NULL) 2758 { 2759 BTIF_TRACE_DEBUG("btapp_dm_rmt_oob_reply: failed to read OOB keys from %s",path); 2760 return FALSE; 2761 } 2762 else 2763 { 2764 BTIF_TRACE_DEBUG("btif_dm_proc_rmt_oob: read OOB data from %s",path); 2765 fread (p_c , 1 , BT_OCTET16_LEN , fp ); 2766 fread (p_r , 1 , BT_OCTET16_LEN , fp ); 2767 fclose(fp); 2768 } 2769 BTIF_TRACE_DEBUG("----btif_dm_proc_rmt_oob: TRUE"); 2770 sprintf(t, "%02x:%02x:%02x:%02x:%02x:%02x", 2771 oob_cb.oob_bdaddr[0], oob_cb.oob_bdaddr[1], oob_cb.oob_bdaddr[2], 2772 oob_cb.oob_bdaddr[3], oob_cb.oob_bdaddr[4], oob_cb.oob_bdaddr[5]); 2773 BTIF_TRACE_DEBUG("----btif_dm_proc_rmt_oob: peer_bdaddr = %s", t); 2774 sprintf(t, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", 2775 p_c[0], p_c[1], p_c[2], p_c[3], p_c[4], p_c[5], p_c[6], p_c[7], 2776 p_c[8], p_c[9], p_c[10], p_c[11], p_c[12], p_c[13], p_c[14], p_c[15]); 2777 BTIF_TRACE_DEBUG("----btif_dm_proc_rmt_oob: c = %s",t); 2778 sprintf(t, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", 2779 p_r[0], p_r[1], p_r[2], p_r[3], p_r[4], p_r[5], p_r[6], p_r[7], 2780 p_r[8], p_r[9], p_r[10], p_r[11], p_r[12], p_r[13], p_r[14], p_r[15]); 2781 BTIF_TRACE_DEBUG("----btif_dm_proc_rmt_oob: r = %s",t); 2782 bdcpy(bt_bd_addr.address, bd_addr); 2783 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_BOND_STATE_BONDING, 2784 (char *)&bt_bd_addr, sizeof(bt_bdaddr_t), NULL); 2785 result = TRUE; 2786 } 2787 BTIF_TRACE_DEBUG("btif_dm_proc_rmt_oob result=%d",result); 2788 return result; 2789} 2790#endif /* BTIF_DM_OOB_TEST */ 2791#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 2792 2793static void btif_dm_ble_key_notif_evt(tBTA_DM_SP_KEY_NOTIF *p_ssp_key_notif) 2794{ 2795 bt_bdaddr_t bd_addr; 2796 bt_bdname_t bd_name; 2797 UINT32 cod; 2798 int dev_type; 2799 2800 BTIF_TRACE_DEBUG("%s", __FUNCTION__); 2801 2802 /* Remote name update */ 2803 if (!btif_get_device_type(p_ssp_key_notif->bd_addr, &dev_type)) 2804 { 2805 dev_type = BT_DEVICE_TYPE_BLE; 2806 } 2807 btif_dm_update_ble_remote_properties(p_ssp_key_notif->bd_addr , p_ssp_key_notif->bd_name, 2808 (tBT_DEVICE_TYPE) dev_type); 2809 bdcpy(bd_addr.address, p_ssp_key_notif->bd_addr); 2810 memcpy(bd_name.name, p_ssp_key_notif->bd_name, BD_NAME_LEN); 2811 2812 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 2813 pairing_cb.is_ssp = FALSE; 2814 cod = COD_UNCLASSIFIED; 2815 2816 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, 2817 cod, BT_SSP_VARIANT_PASSKEY_NOTIFICATION, 2818 p_ssp_key_notif->passkey); 2819} 2820 2821/******************************************************************************* 2822** 2823** Function btif_dm_ble_auth_cmpl_evt 2824** 2825** Description Executes authentication complete event in btif context 2826** 2827** Returns void 2828** 2829*******************************************************************************/ 2830static void btif_dm_ble_auth_cmpl_evt (tBTA_DM_AUTH_CMPL *p_auth_cmpl) 2831{ 2832 /* Save link key, if not temporary */ 2833 bt_bdaddr_t bd_addr; 2834 bt_status_t status = BT_STATUS_FAIL; 2835 bt_bond_state_t state = BT_BOND_STATE_NONE; 2836 2837 bdcpy(bd_addr.address, p_auth_cmpl->bd_addr); 2838 if ( (p_auth_cmpl->success == TRUE) && (p_auth_cmpl->key_present) ) 2839 { 2840 /* store keys */ 2841 } 2842 if (p_auth_cmpl->success) 2843 { 2844 status = BT_STATUS_SUCCESS; 2845 state = BT_BOND_STATE_BONDED; 2846 2847 btif_dm_save_ble_bonding_keys(); 2848 BTA_GATTC_Refresh(bd_addr.address); 2849 btif_dm_get_remote_services(&bd_addr); 2850 } 2851 else 2852 { 2853 /*Map the HCI fail reason to bt status */ 2854 switch (p_auth_cmpl->fail_reason) 2855 { 2856 case BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL: 2857 case BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL: 2858 btif_dm_remove_ble_bonding_keys(); 2859 status = BT_STATUS_AUTH_FAILURE; 2860 break; 2861 case BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT: 2862 status = BT_STATUS_AUTH_REJECTED; 2863 break; 2864 default: 2865 btif_dm_remove_ble_bonding_keys(); 2866 status = BT_STATUS_FAIL; 2867 break; 2868 } 2869 } 2870 bond_state_changed(status, &bd_addr, state); 2871} 2872 2873 2874 2875void btif_dm_load_ble_local_keys(void) 2876{ 2877 bt_status_t bt_status; 2878 2879 memset(&ble_local_key_cb, 0, sizeof(btif_dm_local_key_cb_t)); 2880 2881 if (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_ER,(char*)&ble_local_key_cb.er[0], 2882 BT_OCTET16_LEN)== BT_STATUS_SUCCESS) 2883 { 2884 ble_local_key_cb.is_er_rcvd = TRUE; 2885 BTIF_TRACE_DEBUG("%s BLE ER key loaded",__FUNCTION__ ); 2886 } 2887 2888 if ((btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_IR,(char*)&ble_local_key_cb.id_keys.ir[0], 2889 BT_OCTET16_LEN)== BT_STATUS_SUCCESS )&& 2890 (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_IRK, (char*)&ble_local_key_cb.id_keys.irk[0], 2891 BT_OCTET16_LEN)== BT_STATUS_SUCCESS)&& 2892 (btif_storage_get_ble_local_key(BTIF_DM_LE_LOCAL_KEY_DHK,(char*)&ble_local_key_cb.id_keys.dhk[0], 2893 BT_OCTET16_LEN)== BT_STATUS_SUCCESS)) 2894 { 2895 ble_local_key_cb.is_id_keys_rcvd = TRUE; 2896 BTIF_TRACE_DEBUG("%s BLE ID keys loaded",__FUNCTION__ ); 2897 } 2898 2899} 2900void btif_dm_get_ble_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er, 2901 tBTA_BLE_LOCAL_ID_KEYS *p_id_keys) 2902{ 2903 if (ble_local_key_cb.is_er_rcvd ) 2904 { 2905 memcpy(&er[0], &ble_local_key_cb.er[0], sizeof(BT_OCTET16)); 2906 *p_key_mask |= BTA_BLE_LOCAL_KEY_TYPE_ER; 2907 } 2908 2909 if (ble_local_key_cb.is_id_keys_rcvd) 2910 { 2911 memcpy(&p_id_keys->ir[0], &ble_local_key_cb.id_keys.ir[0], sizeof(BT_OCTET16)); 2912 memcpy(&p_id_keys->irk[0], &ble_local_key_cb.id_keys.irk[0], sizeof(BT_OCTET16)); 2913 memcpy(&p_id_keys->dhk[0], &ble_local_key_cb.id_keys.dhk[0], sizeof(BT_OCTET16)); 2914 *p_key_mask |= BTA_BLE_LOCAL_KEY_TYPE_ID; 2915 } 2916 BTIF_TRACE_DEBUG("%s *p_key_mask=0x%02x",__FUNCTION__, *p_key_mask); 2917} 2918 2919void btif_dm_save_ble_bonding_keys(void) 2920{ 2921 2922 bt_bdaddr_t bd_addr; 2923 2924 BTIF_TRACE_DEBUG("%s",__FUNCTION__ ); 2925 2926 bdcpy(bd_addr.address, pairing_cb.bd_addr); 2927 2928 if (pairing_cb.ble.is_penc_key_rcvd) 2929 { 2930 btif_storage_add_ble_bonding_key(&bd_addr, 2931 (char *) &pairing_cb.ble.penc_key, 2932 BTIF_DM_LE_KEY_PENC, 2933 sizeof(btif_dm_ble_penc_keys_t)); 2934 } 2935 2936 if (pairing_cb.ble.is_pid_key_rcvd) 2937 { 2938 btif_storage_add_ble_bonding_key(&bd_addr, 2939 (char *) &pairing_cb.ble.pid_key, 2940 BTIF_DM_LE_KEY_PID, 2941 sizeof(btif_dm_ble_pid_keys_t)); 2942 } 2943 2944 2945 if (pairing_cb.ble.is_pcsrk_key_rcvd) 2946 { 2947 btif_storage_add_ble_bonding_key(&bd_addr, 2948 (char *) &pairing_cb.ble.pcsrk_key, 2949 BTIF_DM_LE_KEY_PCSRK, 2950 sizeof(btif_dm_ble_pcsrk_keys_t)); 2951 } 2952 2953 2954 if (pairing_cb.ble.is_lenc_key_rcvd) 2955 { 2956 btif_storage_add_ble_bonding_key(&bd_addr, 2957 (char *) &pairing_cb.ble.lenc_key, 2958 BTIF_DM_LE_KEY_LENC, 2959 sizeof(btif_dm_ble_lenc_keys_t)); 2960 } 2961 2962 if (pairing_cb.ble.is_lcsrk_key_rcvd) 2963 { 2964 btif_storage_add_ble_bonding_key(&bd_addr, 2965 (char *) &pairing_cb.ble.lcsrk_key, 2966 BTIF_DM_LE_KEY_LCSRK, 2967 sizeof(btif_dm_ble_lcsrk_keys_t)); 2968 } 2969 2970} 2971 2972 2973void btif_dm_remove_ble_bonding_keys(void) 2974{ 2975 bt_bdaddr_t bd_addr; 2976 2977 BTIF_TRACE_DEBUG("%s",__FUNCTION__ ); 2978 2979 bdcpy(bd_addr.address, pairing_cb.bd_addr); 2980 btif_storage_remove_ble_bonding_keys(&bd_addr); 2981} 2982 2983 2984/******************************************************************************* 2985** 2986** Function btif_dm_ble_sec_req_evt 2987** 2988** Description Eprocess security request event in btif context 2989** 2990** Returns void 2991** 2992*******************************************************************************/ 2993void btif_dm_ble_sec_req_evt(tBTA_DM_BLE_SEC_REQ *p_ble_req) 2994{ 2995 bt_bdaddr_t bd_addr; 2996 bt_bdname_t bd_name; 2997 UINT32 cod; 2998 int dev_type; 2999 3000 BTIF_TRACE_DEBUG("%s", __FUNCTION__); 3001 3002 if (pairing_cb.state == BT_BOND_STATE_BONDING) 3003 { 3004 BTIF_TRACE_DEBUG("%s Discard security request", __FUNCTION__); 3005 return; 3006 } 3007 3008 /* Remote name update */ 3009 if (!btif_get_device_type(p_ble_req->bd_addr, &dev_type)) 3010 { 3011 dev_type = BT_DEVICE_TYPE_BLE; 3012 } 3013 btif_dm_update_ble_remote_properties(p_ble_req->bd_addr, p_ble_req->bd_name, 3014 (tBT_DEVICE_TYPE) dev_type); 3015 3016 bdcpy(bd_addr.address, p_ble_req->bd_addr); 3017 memcpy(bd_name.name, p_ble_req->bd_name, BD_NAME_LEN); 3018 3019 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3020 3021 pairing_cb.bond_type = BOND_TYPE_PERSISTENT; 3022 pairing_cb.is_le_only = TRUE; 3023 pairing_cb.is_ssp = TRUE; 3024 3025 cod = COD_UNCLASSIFIED; 3026 3027 HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod, 3028 BT_SSP_VARIANT_CONSENT, 0); 3029} 3030 3031 3032 3033/******************************************************************************* 3034** 3035** Function btif_dm_ble_passkey_req_evt 3036** 3037** Description Executes pin request event in btif context 3038** 3039** Returns void 3040** 3041*******************************************************************************/ 3042static void btif_dm_ble_passkey_req_evt(tBTA_DM_PIN_REQ *p_pin_req) 3043{ 3044 bt_bdaddr_t bd_addr; 3045 bt_bdname_t bd_name; 3046 UINT32 cod; 3047 int dev_type; 3048 3049 /* Remote name update */ 3050 if (!btif_get_device_type(p_pin_req->bd_addr, &dev_type)) 3051 { 3052 dev_type = BT_DEVICE_TYPE_BLE; 3053 } 3054 btif_dm_update_ble_remote_properties(p_pin_req->bd_addr,p_pin_req->bd_name, 3055 (tBT_DEVICE_TYPE) dev_type); 3056 3057 bdcpy(bd_addr.address, p_pin_req->bd_addr); 3058 memcpy(bd_name.name, p_pin_req->bd_name, BD_NAME_LEN); 3059 3060 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING); 3061 pairing_cb.is_le_only = TRUE; 3062 3063 cod = COD_UNCLASSIFIED; 3064 3065 HAL_CBACK(bt_hal_cbacks, pin_request_cb, 3066 &bd_addr, &bd_name, cod); 3067} 3068 3069 3070void btif_dm_update_ble_remote_properties( BD_ADDR bd_addr, BD_NAME bd_name, 3071 tBT_DEVICE_TYPE dev_type) 3072{ 3073 btif_update_remote_properties(bd_addr,bd_name,NULL,dev_type); 3074} 3075 3076static void btif_dm_ble_tx_test_cback(void *p) 3077{ 3078 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_TX_TEST, 3079 (char *)p, 1, NULL); 3080} 3081 3082static void btif_dm_ble_rx_test_cback(void *p) 3083{ 3084 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_RX_TEST, 3085 (char *)p, 1, NULL); 3086} 3087 3088static void btif_dm_ble_test_end_cback(void *p) 3089{ 3090 btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_LE_TEST_END, 3091 (char *)p, 3, NULL); 3092} 3093/******************************************************************************* 3094** 3095** Function btif_le_test_mode 3096** 3097** Description Sends a HCI BLE Test command to the Controller 3098** 3099** Returns BT_STATUS_SUCCESS on success 3100** 3101*******************************************************************************/ 3102bt_status_t btif_le_test_mode(uint16_t opcode, uint8_t *buf, uint8_t len) 3103{ 3104 switch (opcode) { 3105 case HCI_BLE_TRANSMITTER_TEST: 3106 if (len != 3) return BT_STATUS_PARM_INVALID; 3107 BTM_BleTransmitterTest(buf[0],buf[1],buf[2], btif_dm_ble_tx_test_cback); 3108 break; 3109 case HCI_BLE_RECEIVER_TEST: 3110 if (len != 1) return BT_STATUS_PARM_INVALID; 3111 BTM_BleReceiverTest(buf[0], btif_dm_ble_rx_test_cback); 3112 break; 3113 case HCI_BLE_TEST_END: 3114 BTM_BleTestEnd((tBTM_CMPL_CB*) btif_dm_ble_test_end_cback); 3115 break; 3116 default: 3117 BTIF_TRACE_ERROR("%s: Unknown LE Test Mode Command 0x%x", __FUNCTION__, opcode); 3118 return BT_STATUS_UNSUPPORTED; 3119 } 3120 return BT_STATUS_SUCCESS; 3121} 3122 3123#endif 3124 3125void btif_dm_on_disable() 3126{ 3127 /* cancel any pending pairing requests */ 3128 if (pairing_cb.state == BT_BOND_STATE_BONDING) 3129 { 3130 bt_bdaddr_t bd_addr; 3131 3132 BTIF_TRACE_DEBUG("%s: Cancel pending pairing request", __FUNCTION__); 3133 bdcpy(bd_addr.address, pairing_cb.bd_addr); 3134 btif_dm_cancel_bond(&bd_addr); 3135 } 3136} 3137 3138/******************************************************************************* 3139** 3140** Function btif_dm_read_energy_info 3141** 3142** Description Reads the energy info from controller 3143** 3144** Returns void 3145** 3146*******************************************************************************/ 3147void btif_dm_read_energy_info() 3148{ 3149#if (defined(BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 3150 BTA_DmBleGetEnergyInfo(bta_energy_info_cb); 3151#endif 3152} 3153 3154static char* btif_get_default_local_name() { 3155 if (btif_default_local_name[0] == '\0') 3156 { 3157 int max_len = sizeof(btif_default_local_name) - 1; 3158 if (BTM_DEF_LOCAL_NAME[0] != '\0') 3159 { 3160 strncpy(btif_default_local_name, BTM_DEF_LOCAL_NAME, max_len); 3161 } 3162 else 3163 { 3164 char prop_model[PROPERTY_VALUE_MAX]; 3165 property_get(PROPERTY_PRODUCT_MODEL, prop_model, ""); 3166 strncpy(btif_default_local_name, prop_model, max_len); 3167 } 3168 btif_default_local_name[max_len] = '\0'; 3169 } 3170 return btif_default_local_name; 3171} 3172