/* * Copyright (C) 2010 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.media.audiofx; import android.app.ActivityThread; import android.util.Log; import java.lang.ref.WeakReference; import android.os.Handler; import android.os.Looper; import android.os.Message; /** * The Visualizer class enables application to retrieve part of the currently playing audio for * visualization purpose. It is not an audio recording interface and only returns partial and low * quality audio content. However, to protect privacy of certain audio data (e.g voice mail) the use * of the visualizer requires the permission android.permission.RECORD_AUDIO. *

The audio session ID passed to the constructor indicates which audio content should be * visualized:
*

*

Two types of representation of audio content can be captured:
*

*

The length of the capture can be retrieved or specified by calling respectively * {@link #getCaptureSize()} and {@link #setCaptureSize(int)} methods. The capture size must be a * power of 2 in the range returned by {@link #getCaptureSizeRange()}. *

In addition to the polling capture mode described above with {@link #getWaveForm(byte[])} and * {@link #getFft(byte[])} methods, a callback mode is also available by installing a listener by * use of the {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. * The rate at which the listener capture method is called as well as the type of data returned is * specified. *

Before capturing data, the Visualizer must be enabled by calling the * {@link #setEnabled(boolean)} method. * When data capture is not needed any more, the Visualizer should be disabled. *

It is good practice to call the {@link #release()} method when the Visualizer is not used * anymore to free up native resources associated to the Visualizer instance. *

Creating a Visualizer on the output mix (audio session 0) requires permission * {@link android.Manifest.permission#MODIFY_AUDIO_SETTINGS} *

The Visualizer class can also be used to perform measurements on the audio being played back. * The measurements to perform are defined by setting a mask of the requested measurement modes with * {@link #setMeasurementMode(int)}. Supported values are {@link #MEASUREMENT_MODE_NONE} to cancel * any measurement, and {@link #MEASUREMENT_MODE_PEAK_RMS} for peak and RMS monitoring. * Measurements can be retrieved through {@link #getMeasurementPeakRms(MeasurementPeakRms)}. */ public class Visualizer { static { System.loadLibrary("audioeffect_jni"); native_init(); } private final static String TAG = "Visualizer-JAVA"; /** * State of a Visualizer object that was not successfully initialized upon creation */ public static final int STATE_UNINITIALIZED = 0; /** * State of a Visualizer object that is ready to be used. */ public static final int STATE_INITIALIZED = 1; /** * State of a Visualizer object that is active. */ public static final int STATE_ENABLED = 2; // to keep in sync with system/media/audio_effects/include/audio_effects/effect_visualizer.h /** * Defines a capture mode where amplification is applied based on the content of the captured * data. This is the default Visualizer mode, and is suitable for music visualization. */ public static final int SCALING_MODE_NORMALIZED = 0; /** * Defines a capture mode where the playback volume will affect (scale) the range of the * captured data. A low playback volume will lead to low sample and fft values, and vice-versa. */ public static final int SCALING_MODE_AS_PLAYED = 1; /** * Defines a measurement mode in which no measurements are performed. */ public static final int MEASUREMENT_MODE_NONE = 0; /** * Defines a measurement mode which computes the peak and RMS value in mB, where 0mB is the * maximum sample value, and -9600mB is the minimum value. * Values for peak and RMS can be retrieved with * {@link #getMeasurementPeakRms(MeasurementPeakRms)}. */ public static final int MEASUREMENT_MODE_PEAK_RMS = 1 << 0; // to keep in sync with frameworks/base/media/jni/audioeffect/android_media_Visualizer.cpp private static final int NATIVE_EVENT_PCM_CAPTURE = 0; private static final int NATIVE_EVENT_FFT_CAPTURE = 1; private static final int NATIVE_EVENT_SERVER_DIED = 2; // Error codes: /** * Successful operation. */ public static final int SUCCESS = 0; /** * Unspecified error. */ public static final int ERROR = -1; /** * Internal operation status. Not returned by any method. */ public static final int ALREADY_EXISTS = -2; /** * Operation failed due to bad object initialization. */ public static final int ERROR_NO_INIT = -3; /** * Operation failed due to bad parameter value. */ public static final int ERROR_BAD_VALUE = -4; /** * Operation failed because it was requested in wrong state. */ public static final int ERROR_INVALID_OPERATION = -5; /** * Operation failed due to lack of memory. */ public static final int ERROR_NO_MEMORY = -6; /** * Operation failed due to dead remote object. */ public static final int ERROR_DEAD_OBJECT = -7; //-------------------------------------------------------------------------- // Member variables //-------------------- /** * Indicates the state of the Visualizer instance */ private int mState = STATE_UNINITIALIZED; /** * Lock to synchronize access to mState */ private final Object mStateLock = new Object(); /** * System wide unique Identifier of the visualizer engine used by this Visualizer instance */ private int mId; /** * Lock to protect listeners updates against event notifications */ private final Object mListenerLock = new Object(); /** * Handler for events coming from the native code */ private NativeEventHandler mNativeEventHandler = null; /** * PCM and FFT capture listener registered by client */ private OnDataCaptureListener mCaptureListener = null; /** * Server Died listener registered by client */ private OnServerDiedListener mServerDiedListener = null; // accessed by native methods private long mNativeVisualizer; private long mJniData; //-------------------------------------------------------------------------- // Constructor, Finalize //-------------------- /** * Class constructor. * @param audioSession system wide unique audio session identifier. If audioSession * is not 0, the visualizer will be attached to the MediaPlayer or AudioTrack in the * same audio session. Otherwise, the Visualizer will apply to the output mix. * * @throws java.lang.UnsupportedOperationException * @throws java.lang.RuntimeException */ public Visualizer(int audioSession) throws UnsupportedOperationException, RuntimeException { int[] id = new int[1]; synchronized (mStateLock) { mState = STATE_UNINITIALIZED; // native initialization int result = native_setup(new WeakReference(this), audioSession, id, ActivityThread.currentOpPackageName()); if (result != SUCCESS && result != ALREADY_EXISTS) { Log.e(TAG, "Error code "+result+" when initializing Visualizer."); switch (result) { case ERROR_INVALID_OPERATION: throw (new UnsupportedOperationException("Effect library not loaded")); default: throw (new RuntimeException("Cannot initialize Visualizer engine, error: " +result)); } } mId = id[0]; if (native_getEnabled()) { mState = STATE_ENABLED; } else { mState = STATE_INITIALIZED; } } } /** * Releases the native Visualizer resources. It is a good practice to release the * visualization engine when not in use. */ public void release() { synchronized (mStateLock) { native_release(); mState = STATE_UNINITIALIZED; } } @Override protected void finalize() { native_finalize(); } /** * Enable or disable the visualization engine. * @param enabled requested enable state * @return {@link #SUCCESS} in case of success, * {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} in case of failure. * @throws IllegalStateException */ public int setEnabled(boolean enabled) throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("setEnabled() called in wrong state: "+mState)); } int status = SUCCESS; if ((enabled && (mState == STATE_INITIALIZED)) || (!enabled && (mState == STATE_ENABLED))) { status = native_setEnabled(enabled); if (status == SUCCESS) { mState = enabled ? STATE_ENABLED : STATE_INITIALIZED; } } return status; } } /** * Get current activation state of the visualizer. * @return true if the visualizer is active, false otherwise */ public boolean getEnabled() { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("getEnabled() called in wrong state: "+mState)); } return native_getEnabled(); } } /** * Returns the capture size range. * @return the mininum capture size is returned in first array element and the maximum in second * array element. */ public static native int[] getCaptureSizeRange(); /** * Returns the maximum capture rate for the callback capture method. This is the maximum value * for the rate parameter of the * {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. * @return the maximum capture rate expressed in milliHertz */ public static native int getMaxCaptureRate(); /** * Sets the capture size, i.e. the number of bytes returned by {@link #getWaveForm(byte[])} and * {@link #getFft(byte[])} methods. The capture size must be a power of 2 in the range returned * by {@link #getCaptureSizeRange()}. * This method must not be called when the Visualizer is enabled. * @param size requested capture size * @return {@link #SUCCESS} in case of success, * {@link #ERROR_BAD_VALUE} in case of failure. * @throws IllegalStateException */ public int setCaptureSize(int size) throws IllegalStateException { synchronized (mStateLock) { if (mState != STATE_INITIALIZED) { throw(new IllegalStateException("setCaptureSize() called in wrong state: "+mState)); } return native_setCaptureSize(size); } } /** * Returns current capture size. * @return the capture size in bytes. */ public int getCaptureSize() throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("getCaptureSize() called in wrong state: "+mState)); } return native_getCaptureSize(); } } /** * Set the type of scaling applied on the captured visualization data. * @param mode see {@link #SCALING_MODE_NORMALIZED} * and {@link #SCALING_MODE_AS_PLAYED} * @return {@link #SUCCESS} in case of success, * {@link #ERROR_BAD_VALUE} in case of failure. * @throws IllegalStateException */ public int setScalingMode(int mode) throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("setScalingMode() called in wrong state: " + mState)); } return native_setScalingMode(mode); } } /** * Returns the current scaling mode on the captured visualization data. * @return the scaling mode, see {@link #SCALING_MODE_NORMALIZED} * and {@link #SCALING_MODE_AS_PLAYED}. * @throws IllegalStateException */ public int getScalingMode() throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("getScalingMode() called in wrong state: " + mState)); } return native_getScalingMode(); } } /** * Sets the combination of measurement modes to be performed by this audio effect. * @param mode a mask of the measurements to perform. The valid values are * {@link #MEASUREMENT_MODE_NONE} (to cancel any measurement) * or {@link #MEASUREMENT_MODE_PEAK_RMS}. * @return {@link #SUCCESS} in case of success, {@link #ERROR_BAD_VALUE} in case of failure. * @throws IllegalStateException */ public int setMeasurementMode(int mode) throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("setMeasurementMode() called in wrong state: " + mState)); } return native_setMeasurementMode(mode); } } /** * Returns the current measurement modes performed by this audio effect * @return the mask of the measurements, * {@link #MEASUREMENT_MODE_NONE} (when no measurements are performed) * or {@link #MEASUREMENT_MODE_PEAK_RMS}. * @throws IllegalStateException */ public int getMeasurementMode() throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("getMeasurementMode() called in wrong state: " + mState)); } return native_getMeasurementMode(); } } /** * Returns the sampling rate of the captured audio. * @return the sampling rate in milliHertz. */ public int getSamplingRate() throws IllegalStateException { synchronized (mStateLock) { if (mState == STATE_UNINITIALIZED) { throw(new IllegalStateException("getSamplingRate() called in wrong state: "+mState)); } return native_getSamplingRate(); } } /** * Returns a waveform capture of currently playing audio content. The capture consists in * a number of consecutive 8-bit (unsigned) mono PCM samples equal to the capture size returned * by {@link #getCaptureSize()}. *

This method must be called when the Visualizer is enabled. * @param waveform array of bytes where the waveform should be returned * @return {@link #SUCCESS} in case of success, * {@link #ERROR_NO_MEMORY}, {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} * in case of failure. * @throws IllegalStateException */ public int getWaveForm(byte[] waveform) throws IllegalStateException { synchronized (mStateLock) { if (mState != STATE_ENABLED) { throw(new IllegalStateException("getWaveForm() called in wrong state: "+mState)); } return native_getWaveForm(waveform); } } /** * Returns a frequency capture of currently playing audio content. *

This method must be called when the Visualizer is enabled. *

The capture is an 8-bit magnitude FFT, the frequency range covered being 0 (DC) to half of * the sampling rate returned by {@link #getSamplingRate()}. The capture returns the real and * imaginary parts of a number of frequency points equal to half of the capture size plus one. *

Note: only the real part is returned for the first point (DC) and the last point * (sampling frequency / 2). *

The layout in the returned byte array is as follows: *

* * * * * * * * * * * * * * * * * * * * * *
Index

0

1

2

3

4

5

...

n - 2

n - 1

Data

Rf0

Rf(n/2)

Rf1

If1

Rf2

If2

...

Rf(n-1)/2

If(n-1)/2

* @param fft array of bytes where the FFT should be returned * @return {@link #SUCCESS} in case of success, * {@link #ERROR_NO_MEMORY}, {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} * in case of failure. * @throws IllegalStateException */ public int getFft(byte[] fft) throws IllegalStateException { synchronized (mStateLock) { if (mState != STATE_ENABLED) { throw(new IllegalStateException("getFft() called in wrong state: "+mState)); } return native_getFft(fft); } } /** * A class to store peak and RMS values. * Peak and RMS are expressed in mB, as described in the * {@link Visualizer#MEASUREMENT_MODE_PEAK_RMS} measurement mode. */ public static final class MeasurementPeakRms { /** * The peak value in mB. */ public int mPeak; /** * The RMS value in mB. */ public int mRms; } /** * Retrieves the latest peak and RMS measurement. * Sets the peak and RMS fields of the supplied {@link Visualizer.MeasurementPeakRms} to the * latest measured values. * @param measurement a non-null {@link Visualizer.MeasurementPeakRms} instance to store * the measurement values. * @return {@link #SUCCESS} in case of success, {@link #ERROR_BAD_VALUE}, * {@link #ERROR_NO_MEMORY}, {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} * in case of failure. */ public int getMeasurementPeakRms(MeasurementPeakRms measurement) { if (measurement == null) { Log.e(TAG, "Cannot store measurements in a null object"); return ERROR_BAD_VALUE; } synchronized (mStateLock) { if (mState != STATE_ENABLED) { throw (new IllegalStateException("getMeasurementPeakRms() called in wrong state: " + mState)); } return native_getPeakRms(measurement); } } //--------------------------------------------------------- // Interface definitions //-------------------- /** * The OnDataCaptureListener interface defines methods called by the Visualizer to periodically * update the audio visualization capture. * The client application can implement this interface and register the listener with the * {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. */ public interface OnDataCaptureListener { /** * Method called when a new waveform capture is available. *

Data in the waveform buffer is valid only within the scope of the callback. * Applications which needs access to the waveform data after returning from the callback * should make a copy of the data instead of holding a reference. * @param visualizer Visualizer object on which the listener is registered. * @param waveform array of bytes containing the waveform representation. * @param samplingRate sampling rate of the audio visualized. */ void onWaveFormDataCapture(Visualizer visualizer, byte[] waveform, int samplingRate); /** * Method called when a new frequency capture is available. *

Data in the fft buffer is valid only within the scope of the callback. * Applications which needs access to the fft data after returning from the callback * should make a copy of the data instead of holding a reference. * @param visualizer Visualizer object on which the listener is registered. * @param fft array of bytes containing the frequency representation. * @param samplingRate sampling rate of the audio visualized. */ void onFftDataCapture(Visualizer visualizer, byte[] fft, int samplingRate); } /** * Registers an OnDataCaptureListener interface and specifies the rate at which the capture * should be updated as well as the type of capture requested. *

Call this method with a null listener to stop receiving the capture updates. * @param listener OnDataCaptureListener registered * @param rate rate in milliHertz at which the capture should be updated * @param waveform true if a waveform capture is requested: the onWaveFormDataCapture() * method will be called on the OnDataCaptureListener interface. * @param fft true if a frequency capture is requested: the onFftDataCapture() method will be * called on the OnDataCaptureListener interface. * @return {@link #SUCCESS} in case of success, * {@link #ERROR_NO_INIT} or {@link #ERROR_BAD_VALUE} in case of failure. */ public int setDataCaptureListener(OnDataCaptureListener listener, int rate, boolean waveform, boolean fft) { synchronized (mListenerLock) { mCaptureListener = listener; } if (listener == null) { // make sure capture callback is stopped in native code waveform = false; fft = false; } int status = native_setPeriodicCapture(rate, waveform, fft); if (status == SUCCESS) { if ((listener != null) && (mNativeEventHandler == null)) { Looper looper; if ((looper = Looper.myLooper()) != null) { mNativeEventHandler = new NativeEventHandler(this, looper); } else if ((looper = Looper.getMainLooper()) != null) { mNativeEventHandler = new NativeEventHandler(this, looper); } else { mNativeEventHandler = null; status = ERROR_NO_INIT; } } } return status; } /** * @hide * * The OnServerDiedListener interface defines a method called by the Visualizer to indicate that * the connection to the native media server has been broken and that the Visualizer object will * need to be released and re-created. * The client application can implement this interface and register the listener with the * {@link #setServerDiedListener(OnServerDiedListener)} method. */ public interface OnServerDiedListener { /** * @hide * * Method called when the native media server has died. *

If the native media server encounters a fatal error and needs to restart, the binder * connection from the {@link #Visualizer} to the media server will be broken. Data capture * callbacks will stop happening, and client initiated calls to the {@link #Visualizer} * instance will fail with the error code {@link #DEAD_OBJECT}. To restore functionality, * clients should {@link #release()} their old visualizer and create a new instance. */ void onServerDied(); } /** * @hide * * Registers an OnServerDiedListener interface. *

Call this method with a null listener to stop receiving server death notifications. * @return {@link #SUCCESS} in case of success, */ public int setServerDiedListener(OnServerDiedListener listener) { synchronized (mListenerLock) { mServerDiedListener = listener; } return SUCCESS; } /** * Helper class to handle the forwarding of native events to the appropriate listeners */ private class NativeEventHandler extends Handler { private Visualizer mVisualizer; public NativeEventHandler(Visualizer v, Looper looper) { super(looper); mVisualizer = v; } private void handleCaptureMessage(Message msg) { OnDataCaptureListener l = null; synchronized (mListenerLock) { l = mVisualizer.mCaptureListener; } if (l != null) { byte[] data = (byte[])msg.obj; int samplingRate = msg.arg1; switch(msg.what) { case NATIVE_EVENT_PCM_CAPTURE: l.onWaveFormDataCapture(mVisualizer, data, samplingRate); break; case NATIVE_EVENT_FFT_CAPTURE: l.onFftDataCapture(mVisualizer, data, samplingRate); break; default: Log.e(TAG,"Unknown native event in handleCaptureMessge: "+msg.what); break; } } } private void handleServerDiedMessage(Message msg) { OnServerDiedListener l = null; synchronized (mListenerLock) { l = mVisualizer.mServerDiedListener; } if (l != null) l.onServerDied(); } @Override public void handleMessage(Message msg) { if (mVisualizer == null) { return; } switch(msg.what) { case NATIVE_EVENT_PCM_CAPTURE: case NATIVE_EVENT_FFT_CAPTURE: handleCaptureMessage(msg); break; case NATIVE_EVENT_SERVER_DIED: handleServerDiedMessage(msg); break; default: Log.e(TAG,"Unknown native event: "+msg.what); break; } } } //--------------------------------------------------------- // Interface definitions //-------------------- private static native final void native_init(); private native final int native_setup(Object audioeffect_this, int audioSession, int[] id, String opPackageName); private native final void native_finalize(); private native final void native_release(); private native final int native_setEnabled(boolean enabled); private native final boolean native_getEnabled(); private native final int native_setCaptureSize(int size); private native final int native_getCaptureSize(); private native final int native_setScalingMode(int mode); private native final int native_getScalingMode(); private native final int native_setMeasurementMode(int mode); private native final int native_getMeasurementMode(); private native final int native_getSamplingRate(); private native final int native_getWaveForm(byte[] waveform); private native final int native_getFft(byte[] fft); private native final int native_getPeakRms(MeasurementPeakRms measurement); private native final int native_setPeriodicCapture(int rate, boolean waveForm, boolean fft); //--------------------------------------------------------- // Java methods called from the native side //-------------------- @SuppressWarnings("unused") private static void postEventFromNative(Object effect_ref, int what, int arg1, int arg2, Object obj) { Visualizer visu = (Visualizer)((WeakReference)effect_ref).get(); if (visu == null) { return; } if (visu.mNativeEventHandler != null) { Message m = visu.mNativeEventHandler.obtainMessage(what, arg1, arg2, obj); visu.mNativeEventHandler.sendMessage(m); } } }