main.mk revision 145ae32069d830d9318b61a996633126141c25a7
1# Only use ANDROID_BUILD_SHELL to wrap around bash. 2# DO NOT use other shells such as zsh. 3ifdef ANDROID_BUILD_SHELL 4SHELL := $(ANDROID_BUILD_SHELL) 5else 6# Use bash, not whatever shell somebody has installed as /bin/sh 7# This is repeated in config.mk, since envsetup.sh runs that file 8# directly. 9SHELL := /bin/bash 10endif 11 12# this turns off the suffix rules built into make 13.SUFFIXES: 14 15# this turns off the RCS / SCCS implicit rules of GNU Make 16% : RCS/%,v 17% : RCS/% 18% : %,v 19% : s.% 20% : SCCS/s.% 21 22# If a rule fails, delete $@. 23.DELETE_ON_ERROR: 24 25# Figure out where we are. 26#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 27#TOP := $(patsubst %/,%,$(TOP)) 28 29# TOPDIR is the normal variable you should use, because 30# if we are executing relative to the current directory 31# it can be "", whereas TOP must be "." which causes 32# pattern matching problems when make strips off the 33# trailing "./" from paths in various places. 34#ifeq ($(TOP),.) 35#TOPDIR := 36#else 37#TOPDIR := $(TOP)/ 38#endif 39 40# Check for broken versions of make. 41ifneq (1,$(strip $(shell expr $(MAKE_VERSION) \>= 3.81))) 42$(warning ********************************************************************************) 43$(warning * You are using version $(MAKE_VERSION) of make.) 44$(warning * Android can only be built by versions 3.81 and higher.) 45$(warning * see https://source.android.com/source/download.html) 46$(warning ********************************************************************************) 47$(error stopping) 48endif 49 50# Absolute path of the present working direcotry. 51# This overrides the shell variable $PWD, which does not necessarily points to 52# the top of the source tree, for example when "make -C" is used in m/mm/mmm. 53PWD := $(shell pwd) 54 55TOP := . 56TOPDIR := 57 58BUILD_SYSTEM := $(TOPDIR)build/core 59 60# This is the default target. It must be the first declared target. 61.PHONY: droid 62DEFAULT_GOAL := droid 63$(DEFAULT_GOAL): 64 65# Used to force goals to build. Only use for conditionally defined goals. 66.PHONY: FORCE 67FORCE: 68 69# These goals don't need to collect and include Android.mks/CleanSpec.mks 70# in the source tree. 71dont_bother_goals := clean clobber dataclean installclean \ 72 help out \ 73 snod systemimage-nodeps \ 74 stnod systemtarball-nodeps \ 75 userdataimage-nodeps userdatatarball-nodeps \ 76 cacheimage-nodeps \ 77 vendorimage-nodeps \ 78 ramdisk-nodeps \ 79 bootimage-nodeps \ 80 recoveryimage-nodeps 81 82ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),) 83dont_bother := true 84endif 85 86ORIGINAL_MAKECMDGOALS := $(MAKECMDGOALS) 87 88# Targets that provide quick help on the build system. 89include $(BUILD_SYSTEM)/help.mk 90 91# Set up various standard variables based on configuration 92# and host information. 93include $(BUILD_SYSTEM)/config.mk 94 95ifeq ($(USE_NINJA),true) 96include build/core/ninja.mk 97else # !USE_NINJA 98 99# Write the build number to a file so it can be read back in 100# without changing the command line every time. Avoids rebuilds 101# when using ninja. 102$(shell mkdir -p $(OUT_DIR) && echo -n $(BUILD_NUMBER) > $(OUT_DIR)/build_number.txt) 103BUILD_NUMBER_FROM_FILE := $$(cat $(OUT_DIR)/build_number.txt) 104 105# CTS-specific config. 106-include cts/build/config.mk 107 108# This allows us to force a clean build - included after the config.mk 109# environment setup is done, but before we generate any dependencies. This 110# file does the rm -rf inline so the deps which are all done below will 111# be generated correctly 112include $(BUILD_SYSTEM)/cleanbuild.mk 113 114# Include the google-specific config 115-include vendor/google/build/config.mk 116 117VERSION_CHECK_SEQUENCE_NUMBER := 5 118-include $(OUT_DIR)/versions_checked.mk 119ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) 120 121$(info Checking build tools versions...) 122 123# check for a case sensitive file system 124ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 125 echo a > $(OUT_DIR)/casecheck.txt; \ 126 echo B > $(OUT_DIR)/CaseCheck.txt; \ 127 cat $(OUT_DIR)/casecheck.txt)) 128$(warning ************************************************************) 129$(warning You are building on a case-insensitive filesystem.) 130$(warning Please move your source tree to a case-sensitive filesystem.) 131$(warning ************************************************************) 132$(error Case-insensitive filesystems not supported) 133endif 134 135# Make sure that there are no spaces in the absolute path; the 136# build system can't deal with them. 137ifneq ($(words $(shell pwd)),1) 138$(warning ************************************************************) 139$(warning You are building in a directory whose absolute path contains) 140$(warning a space character:) 141$(warning $(space)) 142$(warning "$(shell pwd)") 143$(warning $(space)) 144$(warning Please move your source tree to a path that does not contain) 145$(warning any spaces.) 146$(warning ************************************************************) 147$(error Directory names containing spaces not supported) 148endif 149 150java_version_str := $(shell unset _JAVA_OPTIONS && java -version 2>&1) 151javac_version_str := $(shell unset _JAVA_OPTIONS && javac -version 2>&1) 152 153# Check for the correct version of java, should be 1.7 by 154# default, and 1.8 if EXPERIMENTAL_USE_JAVA8 is set 155ifneq ($(EXPERIMENTAL_USE_JAVA8),) 156required_version := "1.8.x" 157required_javac_version := "1.8" 158java_version := $(shell echo '$(java_version_str)' | grep 'openjdk .*[ "]1\.8[\. "$$]') 159javac_version := $(shell echo '$(javac_version_str)' | grep '[ "]1\.8[\. "$$]') 160else # default 161required_version := "1.7.x" 162required_javac_version := "1.7" 163java_version := $(shell echo '$(java_version_str)' | grep '^java .*[ "]1\.7[\. "$$]') 164javac_version := $(shell echo '$(javac_version_str)' | grep '[ "]1\.7[\. "$$]') 165endif # if EXPERIMENTAL_USE_JAVA8 166 167ifeq ($(strip $(java_version)),) 168$(info ************************************************************) 169$(info You are attempting to build with the incorrect version) 170$(info of java.) 171$(info $(space)) 172$(info Your version is: $(java_version_str).) 173$(info The required version is: $(required_version)) 174$(info $(space)) 175$(info Please follow the machine setup instructions at) 176$(info $(space)$(space)$(space)$(space)https://source.android.com/source/initializing.html) 177$(info ************************************************************) 178$(error stop) 179endif 180 181# Check for the current JDK. 182# 183# For Java 1.7, we require OpenJDK on linux and Oracle JDK on Mac OS. 184requires_openjdk := false 185ifeq ($(BUILD_OS),linux) 186requires_openjdk := true 187endif 188 189 190# Check for the current jdk 191ifeq ($(requires_openjdk), true) 192# The user asked for java7 openjdk, so check that the host 193# java version is really openjdk 194ifeq ($(shell echo '$(java_version_str)' | grep -i openjdk),) 195$(info ************************************************************) 196$(info You asked for an OpenJDK 7 build but your version is) 197$(info $(java_version_str).) 198$(info ************************************************************) 199$(error stop) 200endif # java version is not OpenJdk 201else # if requires_openjdk 202ifneq ($(shell echo '$(java_version_str)' | grep -i openjdk),) 203$(info ************************************************************) 204$(info You are attempting to build with an unsupported JDK.) 205$(info $(space)) 206$(info You use OpenJDK but only Sun/Oracle JDK is supported.) 207$(info Please follow the machine setup instructions at) 208$(info $(space)$(space)$(space)$(space)https://source.android.com/source/download.html) 209$(info ************************************************************) 210$(error stop) 211endif # java version is not Sun Oracle JDK 212endif # if requires_openjdk 213 214# Check for the correct version of javac 215ifeq ($(strip $(javac_version)),) 216$(info ************************************************************) 217$(info You are attempting to build with the incorrect version) 218$(info of javac.) 219$(info $(space)) 220$(info Your version is: $(javac_version_str).) 221$(info The required version is: $(required_javac_version)) 222$(info $(space)) 223$(info Please follow the machine setup instructions at) 224$(info $(space)$(space)$(space)$(space)https://source.android.com/source/download.html) 225$(info ************************************************************) 226$(error stop) 227endif 228 229 230ifndef BUILD_EMULATOR 231 # Emulator binaries are now provided under prebuilts/android-emulator/ 232 BUILD_EMULATOR := false 233endif 234 235$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ 236 > $(OUT_DIR)/versions_checked.mk) 237$(shell echo 'BUILD_EMULATOR ?= $(BUILD_EMULATOR)' \ 238 >> $(OUT_DIR)/versions_checked.mk) 239endif 240 241# These are the modifier targets that don't do anything themselves, but 242# change the behavior of the build. 243# (must be defined before including definitions.make) 244INTERNAL_MODIFIER_TARGETS := showcommands all incrementaljavac 245 246.PHONY: incrementaljavac 247incrementaljavac: ; 248 249# WARNING: 250# ENABLE_INCREMENTALJAVAC should NOT be enabled by default, because change of 251# a Java source file won't trigger rebuild of its dependent Java files. 252# You can only enable it by adding "incrementaljavac" to your make command line. 253# You are responsible for the correctness of the incremental build. 254# This may decrease incremental build time dramatically for large Java libraries, 255# such as core.jar, framework.jar, etc. 256ENABLE_INCREMENTALJAVAC := 257ifneq (,$(filter incrementaljavac, $(MAKECMDGOALS))) 258ENABLE_INCREMENTALJAVAC := true 259MAKECMDGOALS := $(filter-out incrementaljavac, $(MAKECMDGOALS)) 260endif 261 262# EMMA_INSTRUMENT_STATIC merges the static emma library to each emma-enabled module. 263ifeq (true,$(EMMA_INSTRUMENT_STATIC)) 264EMMA_INSTRUMENT := true 265endif 266 267# Bring in standard build system definitions. 268include $(BUILD_SYSTEM)/definitions.mk 269 270# Bring in dex_preopt.mk 271include $(BUILD_SYSTEM)/dex_preopt.mk 272 273ifneq ($(filter user userdebug eng,$(MAKECMDGOALS)),) 274$(info ***************************************************************) 275$(info ***************************************************************) 276$(info Do not pass '$(filter user userdebug eng,$(MAKECMDGOALS))' on \ 277 the make command line.) 278$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 279$(info choosecombo.) 280$(info ***************************************************************) 281$(info ***************************************************************) 282$(error stopping) 283endif 284 285ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 286$(info ***************************************************************) 287$(info ***************************************************************) 288$(info Invalid variant: $(TARGET_BUILD_VARIANT)) 289$(info Valid values are: $(INTERNAL_VALID_VARIANTS)) 290$(info ***************************************************************) 291$(info ***************************************************************) 292$(error stopping) 293endif 294 295# ----------------------------------------------------------------- 296# Variable to check java support level inside PDK build. 297# Not necessary if the components is not in PDK. 298# not defined : not supported 299# "sdk" : sdk API only 300# "platform" : platform API supproted 301TARGET_BUILD_JAVA_SUPPORT_LEVEL := platform 302 303# ----------------------------------------------------------------- 304# The pdk (Platform Development Kit) build 305include build/core/pdk_config.mk 306 307# ----------------------------------------------------------------- 308### 309### In this section we set up the things that are different 310### between the build variants 311### 312 313is_sdk_build := 314 315ifneq ($(filter sdk win_sdk sdk_addon,$(MAKECMDGOALS)),) 316is_sdk_build := true 317endif 318 319# Add build properties for ART. These define system properties used by installd 320# to pass flags to dex2oat. 321ADDITIONAL_BUILD_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart 322ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).variant=$(DEX2OAT_TARGET_CPU_VARIANT) 323ifneq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),) 324 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) 325endif 326 327ifdef TARGET_2ND_ARCH 328 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).variant=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT) 329 ifneq ($($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),) 330 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).features=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) 331 endif 332endif 333 334## user/userdebug ## 335 336user_variant := $(filter user userdebug,$(TARGET_BUILD_VARIANT)) 337enable_target_debugging := true 338tags_to_install := 339ifneq (,$(user_variant)) 340 # Target is secure in user builds. 341 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 342 343 ifeq ($(user_variant),userdebug) 344 # Pick up some extra useful tools 345 tags_to_install += debug 346 else 347 # Disable debugging in plain user builds. 348 enable_target_debugging := 349 endif 350 351 # Turn on Dalvik preoptimization for user builds, but only if not 352 # explicitly disabled and the build is running on Linux (since host 353 # Dalvik isn't built for non-Linux hosts). 354 ifeq (,$(WITH_DEXPREOPT)) 355 ifeq ($(user_variant),user) 356 ifeq ($(HOST_OS),linux) 357 # TODO: turn on WITH_DEXPREOPT for libart user builds. 358 # WITH_DEXPREOPT := true 359 endif 360 endif 361 endif 362 363 # Disallow mock locations by default for user builds 364 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 365 366else # !user_variant 367 # Turn on checkjni for non-user builds. 368 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 369 # Set device insecure for non-user builds. 370 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 371 # Allow mock locations by default for non user builds 372 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 373endif # !user_variant 374 375ifeq (true,$(strip $(enable_target_debugging))) 376 # Target is more debuggable and adbd is on by default 377 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 378 # Enable Dalvik lock contention logging. 379 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500 380 # Include the debugging/testing OTA keys in this build. 381 INCLUDE_TEST_OTA_KEYS := true 382else # !enable_target_debugging 383 # Target is less debuggable and adbd is off by default 384 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 385endif # !enable_target_debugging 386 387## eng ## 388 389ifeq ($(TARGET_BUILD_VARIANT),eng) 390tags_to_install := debug eng 391ifneq ($(filter ro.setupwizard.mode=ENABLED, $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))),) 392 # Don't require the setup wizard on eng builds 393 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 394 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ 395 ro.setupwizard.mode=OPTIONAL 396endif 397ifndef is_sdk_build 398 # Don't verify or compile the image on eng builds to speed startup. 399 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.image-dex2oat-filter=verify-at-runtime 400 # Don't verify or compile apps on eng builds to speed startup. 401 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dex2oat-filter=verify-at-runtime 402endif 403 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.usejit=true 404endif 405 406## sdk ## 407 408ifdef is_sdk_build 409 410# Detect if we want to build a repository for the SDK 411sdk_repo_goal := $(strip $(filter sdk_repo,$(MAKECMDGOALS))) 412MAKECMDGOALS := $(strip $(filter-out sdk_repo,$(MAKECMDGOALS))) 413 414ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS) checkbuild emulator_tests target-files-package,$(MAKECMDGOALS))),1) 415$(error The 'sdk' target may not be specified with any other targets) 416endif 417 418# TODO: this should be eng I think. Since the sdk is built from the eng 419# variant. 420tags_to_install := debug eng 421ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 422ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 423else # !sdk 424endif 425 426BUILD_WITHOUT_PV := true 427 428ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 429 430# enable vm tracing in files for now to help track 431# the cause of ANRs in the content process 432ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 433 434# ------------------------------------------------------------ 435# Define a function that, given a list of module tags, returns 436# non-empty if that module should be installed in /system. 437 438# For most goals, anything not tagged with the "tests" tag should 439# be installed in /system. 440define should-install-to-system 441$(if $(filter tests,$(1)),,true) 442endef 443 444ifdef is_sdk_build 445# For the sdk goal, anything with the "samples" tag should be 446# installed in /data even if that module also has "eng"/"debug"/"user". 447define should-install-to-system 448$(if $(filter samples tests,$(1)),,true) 449endef 450endif 451 452 453# If they only used the modifier goals (showcommands, etc), we'll actually 454# build the default target. 455ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) 456.PHONY: $(INTERNAL_MODIFIER_TARGETS) 457$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) 458endif 459 460# Bring in all modules that need to be built. 461ifeq ($(HOST_OS),windows) 462SDK_ONLY := true 463endif 464 465ifeq ($(SDK_ONLY),true) 466include $(TOPDIR)sdk/build/windows_sdk_whitelist.mk 467include $(TOPDIR)development/build/windows_sdk_whitelist.mk 468 469else # !SDK_ONLY 470# 471# Typical build; include any Android.mk files we can find. 472# 473subdirs := $(TOP) 474 475FULL_BUILD := true 476 477endif # !SDK_ONLY 478 479# Before we go and include all of the module makefiles, stash away 480# the PRODUCT_* values so that later we can verify they are not modified. 481stash_product_vars:=true 482ifeq ($(stash_product_vars),true) 483 $(call stash-product-vars, __STASHED) 484endif 485 486ifneq ($(ONE_SHOT_MAKEFILE),) 487# We've probably been invoked by the "mm" shell function 488# with a subdirectory's makefile. 489include $(ONE_SHOT_MAKEFILE) 490# Change CUSTOM_MODULES to include only modules that were 491# defined by this makefile; this will install all of those 492# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 493# so that the modules will be installed in the same place they 494# would have been with a normal make. 495CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) 496FULL_BUILD := 497# Stub out the notice targets, which probably aren't defined 498# when using ONE_SHOT_MAKEFILE. 499NOTICE-HOST-%: ; 500NOTICE-TARGET-%: ; 501 502# A helper goal printing out install paths 503.PHONY: GET-INSTALL-PATH 504GET-INSTALL-PATH: 505 @$(foreach m, $(ALL_MODULES), $(if $(ALL_MODULES.$(m).INSTALLED), \ 506 echo 'INSTALL-PATH: $(m) $(ALL_MODULES.$(m).INSTALLED)';)) 507 508else # ONE_SHOT_MAKEFILE 509 510ifneq ($(dont_bother),true) 511# 512# Include all of the makefiles in the system 513# 514 515# Can't use first-makefiles-under here because 516# --mindepth=2 makes the prunes not work. 517subdir_makefiles := \ 518 $(shell build/tools/findleaves.py --prune=$(OUT_DIR) --prune=.repo --prune=.git $(subdirs) Android.mk) 519 520$(foreach mk, $(subdir_makefiles), $(info including $(mk) ...)$(eval include $(mk))) 521 522endif # dont_bother 523 524endif # ONE_SHOT_MAKEFILE 525 526# Now with all Android.mks loaded we can do post cleaning steps. 527include $(BUILD_SYSTEM)/post_clean.mk 528 529ifeq ($(stash_product_vars),true) 530 $(call assert-product-vars, __STASHED) 531endif 532 533include $(BUILD_SYSTEM)/legacy_prebuilts.mk 534ifneq ($(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),) 535 $(warning *** Some files have been added to ALL_PREBUILT.) 536 $(warning *) 537 $(warning * ALL_PREBUILT is a deprecated mechanism that) 538 $(warning * should not be used for new files.) 539 $(warning * As an alternative, use PRODUCT_COPY_FILES in) 540 $(warning * the appropriate product definition.) 541 $(warning * build/target/product/core.mk is the product) 542 $(warning * definition used in all products.) 543 $(warning *) 544 $(foreach bad_prebuilt,$(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),$(warning * unexpected $(bad_prebuilt) in ALL_PREBUILT)) 545 $(warning *) 546 $(error ALL_PREBUILT contains unexpected files) 547endif 548 549# ------------------------------------------------------------------- 550# All module makefiles have been included at this point. 551# ------------------------------------------------------------------- 552 553 554# ------------------------------------------------------------------- 555# Fix up CUSTOM_MODULES to refer to installed files rather than 556# just bare module names. Leave unknown modules alone in case 557# they're actually full paths to a particular file. 558known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 559unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 560CUSTOM_MODULES := \ 561 $(call module-installed-files,$(known_custom_modules)) \ 562 $(unknown_custom_modules) 563 564# ------------------------------------------------------------------- 565# Define dependencies for modules that require other modules. 566# This can only happen now, after we've read in all module makefiles. 567# 568# TODO: deal with the fact that a bare module name isn't 569# unambiguous enough. Maybe declare short targets like 570# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 571# BUG: the system image won't know to depend on modules that are 572# brought in as requirements of other modules. 573# 574# Resolve the required module name to 32-bit or 64-bit variant. 575# Get a list of corresponding 32-bit module names, if one exists. 576define get-32-bit-modules 577$(strip $(foreach m,$(1),\ 578 $(if $(ALL_MODULES.$(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX).CLASS),\ 579 $(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX)))) 580endef 581# Get a list of corresponding 32-bit module names, if one exists; 582# otherwise return the original module name 583define get-32-bit-modules-if-we-can 584$(strip $(foreach m,$(1),\ 585 $(if $(ALL_MODULES.$(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX).CLASS),\ 586 $(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX), 587 $(m)))) 588endef 589 590# If a module is built for 32-bit, the required modules must be 32-bit too; 591# Otherwise if the module is an exectuable or shared library, 592# the required modules must be 64-bit; 593# otherwise we require both 64-bit and 32-bit variant, if one exists. 594$(foreach m,$(ALL_MODULES),\ 595 $(eval r := $(ALL_MODULES.$(m).REQUIRED))\ 596 $(if $(r),\ 597 $(if $(ALL_MODULES.$(m).FOR_2ND_ARCH),\ 598 $(eval r_r := $(call get-32-bit-modules-if-we-can,$(r))),\ 599 $(if $(filter EXECUTABLES SHARED_LIBRARIES,$(ALL_MODULES.$(m).CLASS)),\ 600 $(eval r_r := $(r)),\ 601 $(eval r_r := $(r) $(call get-32-bit-modules,$(r)))\ 602 )\ 603 )\ 604 $(eval ALL_MODULES.$(m).REQUIRED := $(strip $(r_r)))\ 605 )\ 606) 607r_r := 608 609define add-required-deps 610$(1): | $(2) 611endef 612 613$(foreach m,$(ALL_MODULES), \ 614 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 615 $(if $(r), \ 616 $(eval r := $(call module-installed-files,$(r))) \ 617 $(eval t_m := $(filter $(TARGET_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \ 618 $(eval h_m := $(filter $(HOST_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \ 619 $(eval t_r := $(filter $(TARGET_OUT_ROOT)/%, $(r))) \ 620 $(eval h_r := $(filter $(HOST_OUT_ROOT)/%, $(r))) \ 621 $(eval t_m := $(filter-out $(t_r), $(t_m))) \ 622 $(eval h_m := $(filter-out $(h_r), $(h_m))) \ 623 $(if $(t_m), $(eval $(call add-required-deps, $(t_m),$(t_r)))) \ 624 $(if $(h_m), $(eval $(call add-required-deps, $(h_m),$(h_r)))) \ 625 ) \ 626 ) 627 628t_m := 629h_m := 630t_r := 631h_r := 632 633# Establish the dependecies on the shared libraries. 634# It also adds the shared library module names to ALL_MODULES.$(m).REQUIRED, 635# so they can be expanded to product_MODULES later. 636# $(1): TARGET_ or HOST_. 637# $(2): non-empty for 2nd arch. 638define resolve-shared-libs-depes 639$(foreach m,$($(if $(2),$($(1)2ND_ARCH_VAR_PREFIX))$(1)DEPENDENCIES_ON_SHARED_LIBRARIES),\ 640 $(eval p := $(subst :,$(space),$(m)))\ 641 $(eval mod := $(firstword $(p)))\ 642 $(eval deps := $(subst $(comma),$(space),$(lastword $(p))))\ 643 $(if $(2),$(eval deps := $(addsuffix $($(1)2ND_ARCH_MODULE_SUFFIX),$(deps))))\ 644 $(eval r := $(filter $($(1)OUT_ROOT)/%,$(call module-installed-files,\ 645 $(deps))))\ 646 $(eval $(call add-required-deps,$(word 2,$(p)),$(r)))\ 647 $(eval ALL_MODULES.$(mod).REQUIRED += $(deps))) 648endef 649 650$(call resolve-shared-libs-depes,TARGET_) 651ifdef TARGET_2ND_ARCH 652$(call resolve-shared-libs-depes,TARGET_,true) 653endif 654$(call resolve-shared-libs-depes,HOST_) 655ifdef HOST_2ND_ARCH 656$(call resolve-shared-libs-depes,HOST_,true) 657endif 658 659m := 660r := 661p := 662deps := 663add-required-deps := 664 665# ------------------------------------------------------------------- 666# Figure out our module sets. 667# 668# Of the modules defined by the component makefiles, 669# determine what we actually want to build. 670 671########################################################### 672## Expand a module name list with REQUIRED modules 673########################################################### 674# $(1): The variable name that holds the initial module name list. 675# the variable will be modified to hold the expanded results. 676# $(2): The initial module name list. 677# Returns empty string (maybe with some whitespaces). 678define expand-required-modules 679$(eval _erm_new_modules := $(sort $(filter-out $($(1)),\ 680 $(foreach m,$(2),$(ALL_MODULES.$(m).REQUIRED)))))\ 681$(if $(_erm_new_modules),$(eval $(1) += $(_erm_new_modules))\ 682 $(call expand-required-modules,$(1),$(_erm_new_modules))) 683endef 684 685ifdef FULL_BUILD 686 # The base list of modules to build for this product is specified 687 # by the appropriate product definition file, which was included 688 # by product_config.mk. 689 product_MODULES := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES) 690 # Filter out the overridden packages before doing expansion 691 product_MODULES := $(filter-out $(foreach p, $(product_MODULES), \ 692 $(PACKAGES.$(p).OVERRIDES)), $(product_MODULES)) 693 694 # Resolve the :32 :64 module name 695 modules_32 := $(patsubst %:32,%,$(filter %:32, $(product_MODULES))) 696 modules_64 := $(patsubst %:64,%,$(filter %:64, $(product_MODULES))) 697 modules_rest := $(filter-out %:32 %:64,$(product_MODULES)) 698 # Note for 32-bit product, $(modules_32) and $(modules_64) will be 699 # added as their original module names. 700 product_MODULES := $(call get-32-bit-modules-if-we-can, $(modules_32)) 701 product_MODULES += $(modules_64) 702 # For the rest we add both 703 product_MODULES += $(call get-32-bit-modules, $(modules_rest)) 704 product_MODULES += $(modules_rest) 705 706 $(call expand-required-modules,product_MODULES,$(product_MODULES)) 707 708 product_FILES := $(call module-installed-files, $(product_MODULES)) 709 ifeq (0,1) 710 $(info product_FILES for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 711 $(foreach p,$(product_FILES),$(info : $(p))) 712 $(error done) 713 endif 714else 715 # We're not doing a full build, and are probably only including 716 # a subset of the module makefiles. Don't try to build any modules 717 # requested by the product, because we probably won't have rules 718 # to build them. 719 product_FILES := 720endif 721 722eng_MODULES := $(sort \ 723 $(call get-tagged-modules,eng) \ 724 $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_ENG)) \ 725 ) 726debug_MODULES := $(sort \ 727 $(call get-tagged-modules,debug) \ 728 $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_DEBUG)) \ 729 ) 730tests_MODULES := $(sort \ 731 $(call get-tagged-modules,tests) \ 732 $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_TESTS)) \ 733 ) 734 735# TODO: Remove the 3 places in the tree that use ALL_DEFAULT_INSTALLED_MODULES 736# and get rid of it from this list. 737modules_to_install := $(sort \ 738 $(ALL_DEFAULT_INSTALLED_MODULES) \ 739 $(product_FILES) \ 740 $(foreach tag,$(tags_to_install),$($(tag)_MODULES)) \ 741 $(CUSTOM_MODULES) \ 742 ) 743 744# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 745# Filter out (do not install) any overridden packages. 746overridden_packages := $(call get-package-overrides,$(modules_to_install)) 747ifdef overridden_packages 748# old_modules_to_install := $(modules_to_install) 749 modules_to_install := \ 750 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 751 $(modules_to_install)) 752endif 753#$(error filtered out 754# $(filter-out $(modules_to_install),$(old_modules_to_install))) 755 756# Don't include any GNU targets in the SDK. It's ok (and necessary) 757# to build the host tools, but nothing that's going to be installed 758# on the target (including static libraries). 759ifdef is_sdk_build 760 target_gnu_MODULES := \ 761 $(filter \ 762 $(TARGET_OUT_INTERMEDIATES)/% \ 763 $(TARGET_OUT)/% \ 764 $(TARGET_OUT_DATA)/%, \ 765 $(sort $(call get-tagged-modules,gnu))) 766 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 767 modules_to_install := \ 768 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 769 770 # Ensure every module listed in PRODUCT_PACKAGES* gets something installed 771 # TODO: Should we do this for all builds and not just the sdk? 772 dangling_modules := 773 $(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES), \ 774 $(if $(strip $(ALL_MODULES.$(m).INSTALLED) $(ALL_MODULES.$(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX).INSTALLED)),,\ 775 $(eval dangling_modules += $(m)))) 776 ifneq ($(dangling_modules),) 777 $(warning: Modules '$(dangling_modules)' in PRODUCT_PACKAGES have nothing to install!) 778 endif 779 $(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_DEBUG), \ 780 $(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\ 781 $(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_DEBUG has nothing to install!))) 782 $(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_ENG), \ 783 $(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\ 784 $(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_ENG has nothing to install!))) 785 $(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_TESTS), \ 786 $(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\ 787 $(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_TESTS has nothing to install!))) 788endif 789 790# build/core/Makefile contains extra stuff that we don't want to pollute this 791# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 792# contains everything that's built during the current make, but it also further 793# extends ALL_DEFAULT_INSTALLED_MODULES. 794ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 795include $(BUILD_SYSTEM)/Makefile 796modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 797ALL_DEFAULT_INSTALLED_MODULES := 798 799 800# These are additional goals that we build, in order to make sure that there 801# is as little code as possible in the tree that doesn't build. 802modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) 803 804# If you would like to build all goals, and not skip any intermediate 805# steps, you can pass the "all" modifier goal on the commandline. 806ifneq ($(filter all,$(MAKECMDGOALS)),) 807modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) 808endif 809 810# for easier debugging 811modules_to_check := $(sort $(modules_to_check)) 812#$(error modules_to_check $(modules_to_check)) 813 814# ------------------------------------------------------------------- 815# This is used to to get the ordering right, you can also use these, 816# but they're considered undocumented, so don't complain if their 817# behavior changes. 818.PHONY: prebuilt 819prebuilt: $(ALL_PREBUILT) 820 821# An internal target that depends on all copied headers 822# (see copy_headers.make). Other targets that need the 823# headers to be copied first can depend on this target. 824.PHONY: all_copied_headers 825all_copied_headers: ; 826 827$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 828 829# All the droid stuff, in directories 830.PHONY: files 831files: prebuilt \ 832 $(modules_to_install) \ 833 $(INSTALLED_ANDROID_INFO_TXT_TARGET) 834 835# ------------------------------------------------------------------- 836 837.PHONY: checkbuild 838checkbuild: $(modules_to_check) 839ifeq (true,$(ANDROID_BUILD_EVERYTHING_BY_DEFAULT)$(filter $(MAKECMDGOALS),checkbuild)) 840droid: checkbuild 841else 842# ANDROID_BUILD_EVERYTHING_BY_DEFAULT not set, or checkbuild is one of the cmd goals. 843checkbuild: droid 844endif 845 846.PHONY: ramdisk 847ramdisk: $(INSTALLED_RAMDISK_TARGET) 848 849.PHONY: systemtarball 850systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 851 852.PHONY: boottarball 853boottarball: $(INSTALLED_BOOTTARBALL_TARGET) 854 855.PHONY: userdataimage 856userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 857 858ifneq (,$(filter userdataimage, $(MAKECMDGOALS))) 859$(call dist-for-goals, userdataimage, $(BUILT_USERDATAIMAGE_TARGET)) 860endif 861 862.PHONY: userdatatarball 863userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 864 865.PHONY: cacheimage 866cacheimage: $(INSTALLED_CACHEIMAGE_TARGET) 867 868.PHONY: vendorimage 869vendorimage: $(INSTALLED_VENDORIMAGE_TARGET) 870 871.PHONY: bootimage 872bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 873 874# phony target that include any targets in $(ALL_MODULES) 875.PHONY: all_modules 876ifndef BUILD_MODULES_IN_PATHS 877all_modules: $(ALL_MODULES) 878else 879# BUILD_MODULES_IN_PATHS is a list of paths relative to the top of the tree 880build_modules_in_paths := $(patsubst ./%,%,$(BUILD_MODULES_IN_PATHS)) 881module_path_patterns := $(foreach p, $(build_modules_in_paths),\ 882 $(if $(filter %/,$(p)),$(p)%,$(p)/%)) 883my_all_modules := $(sort $(foreach m, $(ALL_MODULES),$(if $(filter\ 884 $(module_path_patterns), $(addsuffix /,$(ALL_MODULES.$(m).PATH))),$(m)))) 885all_modules: $(my_all_modules) 886endif 887 888 889# Build files and then package it into the rom formats 890.PHONY: droidcore 891droidcore: files \ 892 systemimage \ 893 $(INSTALLED_BOOTIMAGE_TARGET) \ 894 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 895 $(INSTALLED_USERDATAIMAGE_TARGET) \ 896 $(INSTALLED_CACHEIMAGE_TARGET) \ 897 $(INSTALLED_VENDORIMAGE_TARGET) \ 898 $(INSTALLED_FILES_FILE) 899 900# dist_files only for putting your library into the dist directory with a full build. 901.PHONY: dist_files 902 903ifneq ($(TARGET_BUILD_APPS),) 904 # If this build is just for apps, only build apps and not the full system by default. 905 906 unbundled_build_modules := 907 ifneq ($(filter all,$(TARGET_BUILD_APPS)),) 908 # If they used the magic goal "all" then build all apps in the source tree. 909 unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m))) 910 else 911 unbundled_build_modules := $(TARGET_BUILD_APPS) 912 endif 913 914 # Dist the installed files if they exist. 915 apps_only_installed_files := $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) 916 $(call dist-for-goals,apps_only, $(apps_only_installed_files)) 917 # For uninstallable modules such as static Java library, we have to dist the built file, 918 # as <module_name>.<suffix> 919 apps_only_dist_built_files := $(foreach m,$(unbundled_build_modules),$(if $(ALL_MODULES.$(m).INSTALLED),,\ 920 $(if $(ALL_MODULES.$(m).BUILT),$(ALL_MODULES.$(m).BUILT):$(m)$(suffix $(ALL_MODULES.$(m).BUILT))))) 921 $(call dist-for-goals,apps_only, $(apps_only_dist_built_files)) 922 923 ifeq ($(EMMA_INSTRUMENT),true) 924 $(EMMA_META_ZIP) : $(apps_only_installed_files) 925 926 $(call dist-for-goals,apps_only, $(EMMA_META_ZIP)) 927 endif 928 929 $(PROGUARD_DICT_ZIP) : $(apps_only_installed_files) 930 $(call dist-for-goals,apps_only, $(PROGUARD_DICT_ZIP)) 931 932 $(SYMBOLS_ZIP) : $(apps_only_installed_files) 933 $(call dist-for-goals,apps_only, $(SYMBOLS_ZIP)) 934 935.PHONY: apps_only 936apps_only: $(unbundled_build_modules) 937 938droid: apps_only 939 940# Combine the NOTICE files for a apps_only build 941$(eval $(call combine-notice-files, \ 942 $(target_notice_file_txt), \ 943 $(target_notice_file_html), \ 944 "Notices for files for apps:", \ 945 $(TARGET_OUT_NOTICE_FILES), \ 946 $(apps_only_installed_files))) 947 948 949else # TARGET_BUILD_APPS 950 $(call dist-for-goals, droidcore, \ 951 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 952 $(INTERNAL_OTA_PACKAGE_TARGET) \ 953 $(SYMBOLS_ZIP) \ 954 $(INSTALLED_FILES_FILE) \ 955 $(INSTALLED_BUILD_PROP_TARGET) \ 956 $(BUILT_TARGET_FILES_PACKAGE) \ 957 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ 958 $(INSTALLED_RAMDISK_TARGET) \ 959 ) 960 961 # Put a copy of the radio/bootloader files in the dist dir. 962 $(foreach f,$(INSTALLED_RADIOIMAGE_TARGET), \ 963 $(call dist-for-goals, droidcore, $(f))) 964 965 ifneq ($(ANDROID_BUILD_EMBEDDED),true) 966 ifneq ($(TARGET_BUILD_PDK),true) 967 $(call dist-for-goals, droidcore, \ 968 $(APPS_ZIP) \ 969 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 970 $(PACKAGE_STATS_FILE) \ 971 ) 972 endif 973 endif 974 975 ifeq ($(EMMA_INSTRUMENT),true) 976 $(EMMA_META_ZIP) : $(INSTALLED_SYSTEMIMAGE) 977 978 $(call dist-for-goals, dist_files, $(EMMA_META_ZIP)) 979 endif 980 981# Building a full system-- the default is to build droidcore 982droid: droidcore dist_files 983 984endif # TARGET_BUILD_APPS 985 986.PHONY: docs 987docs: $(ALL_DOCS) 988 989.PHONY: sdk 990ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 991sdk: $(ALL_SDK_TARGETS) 992$(call dist-for-goals,sdk win_sdk, \ 993 $(ALL_SDK_TARGETS) \ 994 $(SYMBOLS_ZIP) \ 995 $(INSTALLED_BUILD_PROP_TARGET) \ 996) 997 998# umbrella targets to assit engineers in verifying builds 999.PHONY: java native target host java-host java-target native-host native-target \ 1000 java-host-tests java-target-tests native-host-tests native-target-tests \ 1001 java-tests native-tests host-tests target-tests tests 1002# some synonyms 1003.PHONY: host-java target-java host-native target-native \ 1004 target-java-tests target-native-tests 1005host-java : java-host 1006target-java : java-target 1007host-native : native-host 1008target-native : native-target 1009target-java-tests : java-target-tests 1010target-native-tests : native-target-tests 1011tests : host-tests target-tests 1012 1013# To catch more build breakage, check build tests modules in eng and userdebug builds. 1014ifneq ($(ANDROID_NO_TEST_CHECK),true) 1015ifneq ($(TARGET_BUILD_PDK),true) 1016ifneq ($(filter eng userdebug,$(TARGET_BUILD_VARIANT)),) 1017droidcore : target-tests host-tests 1018endif 1019endif 1020endif 1021 1022ifneq (,$(filter samplecode, $(MAKECMDGOALS))) 1023.PHONY: samplecode 1024sample_MODULES := $(sort $(call get-tagged-modules,samples)) 1025sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples 1026sample_APKS_COLLECTION := \ 1027 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module))) 1028$(foreach module,$(sample_MODULES),$(eval $(call \ 1029 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module))))) 1030sample_ADDITIONAL_INSTALLED := \ 1031 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES)) 1032samplecode: $(sample_APKS_COLLECTION) 1033 @echo "Collect sample code apks: $^" 1034 # remove apks that are not intended to be installed. 1035 rm -f $(sample_ADDITIONAL_INSTALLED) 1036endif # samplecode in $(MAKECMDGOALS) 1037 1038.PHONY: findbugs 1039findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 1040 1041.PHONY: clean 1042clean: 1043 @rm -rf $(OUT_DIR)/* 1044 @echo "Entire build directory removed." 1045 1046.PHONY: clobber 1047clobber: clean 1048 1049# The rules for dataclean and installclean are defined in cleanbuild.mk. 1050 1051#xxx scrape this from ALL_MODULE_NAME_TAGS 1052.PHONY: modules 1053modules: 1054 @echo "Available sub-modules:" 1055 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 1056 tr -s ' ' '\n' | sort -u | $(COLUMN) 1057 1058.PHONY: showcommands 1059showcommands: 1060 @echo >/dev/null 1061 1062.PHONY: nothing 1063nothing: 1064 @echo Successfully read the makefiles. 1065endif # !USE_NINJA 1066