main.mk revision a190c523afcee348359ff7e6f6487b5b3742a448
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128is_sdk_build := 129ifneq ($(filter sdk,$(MAKECMDGOALS)),) 130is_sdk_build := true 131endif 132ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 133is_sdk_build := true 134endif 135 136 137## user/userdebug ## 138 139user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 140enable_target_debugging := true 141ifneq (,$(user_variant)) 142 # Target is secure in user builds. 143 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 144 145 tags_to_install := user 146 ifeq ($(user_variant),userdebug) 147 # Pick up some extra useful tools 148 tags_to_install += debug 149 else 150 # Disable debugging in plain user builds. 151 enable_target_debugging := 152 endif 153 154 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 155 # Also, remove the corresponding block in config/product_config.make. 156 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 157 WITH_DEXPREOPT := true 158 endif 159 160 # Disallow mock locations by default for user builds 161 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 162 163else # !user_variant 164 # Turn on checkjni for non-user builds. 165 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 166 # Set device insecure for non-user builds. 167 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 168 # Allow mock locations by default for non user builds 169 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 170endif # !user_variant 171 172ifeq (true,$(strip $(enable_target_debugging))) 173 # Target is more debuggable and adbd is on by default 174 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 175 # Include the debugging/testing OTA keys in this build. 176 INCLUDE_TEST_OTA_KEYS := true 177else # !enable_target_debugging 178 # Target is less debuggable and adbd is off by default 179 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 180endif # !enable_target_debugging 181 182## eng ## 183 184ifeq ($(TARGET_BUILD_VARIANT),eng) 185tags_to_install := user debug eng 186 # Don't require the setup wizard on eng builds 187 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 188 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 189endif 190 191## tests ## 192 193ifeq ($(TARGET_BUILD_VARIANT),tests) 194tags_to_install := user debug eng tests 195endif 196 197## sdk ## 198 199ifdef is_sdk_build 200ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 201$(error The 'sdk' target may not be specified with any other targets) 202endif 203# TODO: this should be eng I think. Since the sdk is built from the eng 204# variant. 205tags_to_install := user debug eng 206ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 207ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 208else # !sdk 209# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 210ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 211endif 212 213# Install an apns-conf.xml file if one's not already being installed. 214ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 215 PRODUCT_COPY_FILES += \ 216 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 217 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 218 $(warning implicitly installing apns-conf_sdk.xml) 219 endif 220endif 221# If we're on an eng or tests build, but not on the sdk, and we have 222# a better one, use that instead. 223ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 224 ifdef is_sdk_build 225 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 226 ifneq ($(strip $(apns_to_use)),) 227 PRODUCT_COPY_FILES := \ 228 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 229 $(strip $(apns_to_use)):system/etc/apns-conf.xml 230 endif 231 endif 232endif 233 234ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 235 236# enable vm tracing in files for now to help track 237# the cause of ANRs in the content process 238ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 239 240 241# ------------------------------------------------------------ 242# Define a function that, given a list of module tags, returns 243# non-empty if that module should be installed in /system. 244 245# For most goals, anything not tagged with the "tests" tag should 246# be installed in /system. 247define should-install-to-system 248$(if $(filter tests,$(1)),,true) 249endef 250 251ifdef is_sdk_build 252# For the sdk goal, anything with the "samples" tag should be 253# installed in /data even if that module also has "eng"/"debug"/"user". 254define should-install-to-system 255$(if $(filter samples tests,$(1)),,true) 256endef 257endif 258 259 260# If all they typed was make showcommands, we'll actually build 261# the default target. 262ifeq ($(MAKECMDGOALS),showcommands) 263.PHONY: showcommands 264showcommands: $(DEFAULT_GOAL) 265endif 266 267# These targets are going to delete stuff, don't bother including 268# the whole directory tree if that's all we're going to do 269ifeq ($(MAKECMDGOALS),clean) 270dont_bother := true 271endif 272ifeq ($(MAKECMDGOALS),clobber) 273dont_bother := true 274endif 275ifeq ($(MAKECMDGOALS),dataclean) 276dont_bother := true 277endif 278ifeq ($(MAKECMDGOALS),installclean) 279dont_bother := true 280endif 281 282# Bring in all modules that need to be built. 283ifneq ($(dont_bother),true) 284 285subdir_makefiles := 286 287ifeq ($(HOST_OS),windows) 288SDK_ONLY := true 289endif 290ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 291SDK_ONLY := true 292endif 293 294ifeq ($(SDK_ONLY),true) 295 296subdirs := \ 297 prebuilt \ 298 build/libs/host \ 299 dalvik/dexdump \ 300 dalvik/libdex \ 301 dalvik/tools/dmtracedump \ 302 dalvik/tools/hprof-conv \ 303 development/emulator/mksdcard \ 304 development/tools/activitycreator \ 305 development/tools/line_endings \ 306 development/host \ 307 external/expat \ 308 external/libpng \ 309 external/qemu \ 310 external/sqlite/dist \ 311 external/zlib \ 312 frameworks/base/libs/utils \ 313 frameworks/base/tools/aapt \ 314 frameworks/base/tools/aidl \ 315 system/core/adb \ 316 system/core/fastboot \ 317 system/core/libcutils \ 318 system/core/liblog \ 319 system/core/libzipfile 320 321# The following can only be built if "javac" is available. 322# This check is used when building parts of the SDK under Cygwin. 323ifneq (,$(shell which javac 2>/dev/null)) 324$(warning sdk-only: javac available.) 325subdirs += \ 326 build/tools/signapk \ 327 build/tools/zipalign \ 328 dalvik/dx \ 329 dalvik/libcore \ 330 development/apps \ 331 development/tools/androidprefs \ 332 development/tools/apkbuilder \ 333 development/tools/jarutils \ 334 development/tools/layoutlib_utils \ 335 development/tools/ninepatch \ 336 development/tools/sdkstats \ 337 development/tools/sdkmanager \ 338 development/tools/mkstubs \ 339 frameworks/base \ 340 frameworks/base/tools/layoutlib \ 341 external/googleclient \ 342 packages 343else 344$(warning sdk-only: javac not available.) 345endif 346 347# Exclude tools/acp when cross-compiling windows under linux 348ifeq ($(findstring Linux,$(UNAME)),) 349subdirs += build/tools/acp 350endif 351 352else # !SDK_ONLY 353ifeq ($(BUILD_TINY_ANDROID), true) 354 355# TINY_ANDROID is a super-minimal build configuration, handy for board 356# bringup and very low level debugging 357 358INTERNAL_DEFAULT_DOCS_TARGETS := 359 360subdirs := \ 361 bionic \ 362 system/core \ 363 build/libs \ 364 build/target \ 365 build/tools/acp \ 366 build/tools/apriori \ 367 build/tools/kcm \ 368 build/tools/soslim \ 369 external/elfcopy \ 370 external/elfutils \ 371 external/yaffs2 \ 372 external/zlib 373else # !BUILD_TINY_ANDROID 374 375# 376# Typical build; include any Android.mk files we can find. 377# 378INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 379subdirs := $(TOP) 380 381FULL_BUILD := true 382 383endif # !BUILD_TINY_ANDROID 384 385endif # !SDK_ONLY 386 387# Can't use first-makefiles-under here because 388# --mindepth=2 makes the prunes not work. 389subdir_makefiles += \ 390 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 391 392# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 393# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 394# make sure only one exists. 395# Real boards should always be associated with an OEM vendor. 396board_config_mk := \ 397 $(strip $(wildcard \ 398 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 399 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 400 )) 401ifeq ($(board_config_mk),) 402 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 403endif 404ifneq ($(words $(board_config_mk)),1) 405 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 406endif 407include $(board_config_mk) 408TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 409board_config_mk := 410 411# Clean up/verify variables defined by the board config file. 412TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 413 414# 415# Include all of the makefiles in the system 416# 417 418ifneq ($(ONE_SHOT_MAKEFILE),) 419# We've probably been invoked by the "mm" shell function 420# with a subdirectory's makefile. 421include $(ONE_SHOT_MAKEFILE) 422# Change CUSTOM_MODULES to include only modules that were 423# defined by this makefile; this will install all of those 424# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 425# so that the modules will be installed in the same place they 426# would have been with a normal make. 427CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 428FULL_BUILD := 429INTERNAL_DEFAULT_DOCS_TARGETS := 430# Stub out the notice targets, which probably aren't defined 431# when using ONE_SHOT_MAKEFILE. 432NOTICE-HOST-%: ; 433NOTICE-TARGET-%: ; 434else 435include $(subdir_makefiles) 436endif 437# ------------------------------------------------------------------- 438# All module makefiles have been included at this point. 439# ------------------------------------------------------------------- 440 441# ------------------------------------------------------------------- 442# Include any makefiles that must happen after the module makefiles 443# have been included. 444# TODO: have these files register themselves via a global var rather 445# than hard-coding the list here. 446ifdef FULL_BUILD 447 # Only include this during a full build, otherwise we can't be 448 # guaranteed that any policies were included. 449 -include frameworks/policies/base/PolicyConfig.mk 450endif 451 452# ------------------------------------------------------------------- 453# Fix up CUSTOM_MODULES to refer to installed files rather than 454# just bare module names. Leave unknown modules alone in case 455# they're actually full paths to a particular file. 456known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 457unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 458CUSTOM_MODULES := \ 459 $(call module-installed-files,$(known_custom_modules)) \ 460 $(unknown_custom_modules) 461 462# ------------------------------------------------------------------- 463# Define dependencies for modules that require other modules. 464# This can only happen now, after we've read in all module makefiles. 465# 466# TODO: deal with the fact that a bare module name isn't 467# unambiguous enough. Maybe declare short targets like 468# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 469# BUG: the system image won't know to depend on modules that are 470# brought in as requirements of other modules. 471define add-required-deps 472$(1): $(2) 473endef 474$(foreach m,$(ALL_MODULES), \ 475 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 476 $(if $(r), \ 477 $(eval r := $(call module-installed-files,$(r))) \ 478 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 479 ) \ 480 ) 481m := 482r := 483add-required-deps := 484 485# ------------------------------------------------------------------- 486# Figure out our module sets. 487 488# Of the modules defined by the component makefiles, 489# determine what we actually want to build. 490# If a module has the "restricted" tag on it, it 491# poisons the rest of the tags and shouldn't appear 492# on any list. 493Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 494 $(ALL_BUILT_MODULES) \ 495 $(CUSTOM_MODULES)) 496# TODO: Remove the 3 places in the tree that use 497# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 498 499ifdef FULL_BUILD 500 # The base list of modules to build for this product is specified 501 # by the appropriate product definition file, which was included 502 # by product_config.make. 503 user_PACKAGES := $(call module-installed-files, \ 504 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 505 ifeq (0,1) 506 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 507 $(foreach p,$(user_PACKAGES),$(info : $(p))) 508 $(error done) 509 endif 510else 511 # We're not doing a full build, and are probably only including 512 # a subset of the module makefiles. Don't try to build any modules 513 # requested by the product, because we probably won't have rules 514 # to build them. 515 user_PACKAGES := 516endif 517# Use tags to get the non-APPS user modules. Use the product 518# definition files to get the APPS user modules. 519user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 520user_MODULES := $(user_MODULES) $(user_PACKAGES) 521 522eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 523debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 524tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 525 526ifeq ($(strip $(tags_to_install)),) 527$(error ASSERTION FAILED: tags_to_install should not be empty) 528endif 529modules_to_install := $(sort $(Default_MODULES) \ 530 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 531 532# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 533# Filter out (do not install) any overridden packages. 534overridden_packages := $(call get-package-overrides,$(modules_to_install)) 535ifdef overridden_packages 536# old_modules_to_install := $(modules_to_install) 537 modules_to_install := \ 538 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 539 $(modules_to_install)) 540endif 541#$(error filtered out 542# $(filter-out $(modules_to_install),$(old_modules_to_install))) 543 544# Don't include any GNU targets in the SDK. It's ok (and necessary) 545# to build the host tools, but nothing that's going to be installed 546# on the target (including static libraries). 547ifdef is_sdk_build 548 target_gnu_MODULES := \ 549 $(filter \ 550 $(TARGET_OUT_INTERMEDIATES)/% \ 551 $(TARGET_OUT)/% \ 552 $(TARGET_OUT_DATA)/%, \ 553 $(sort $(call get-tagged-modules,gnu))) 554 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 555 modules_to_install := \ 556 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 557endif 558 559 560# config/Makefile contains extra stuff that we don't want to pollute this 561# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 562# contains everything that's built during the current make, but it also further 563# extends ALL_DEFAULT_INSTALLED_MODULES. 564ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 565include $(BUILD_SYSTEM)/Makefile 566modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 567ALL_DEFAULT_INSTALLED_MODULES := 568 569endif # dont_bother 570 571# ------------------------------------------------------------------- 572# This is used to to get the ordering right, you can also use these, 573# but they're considered undocumented, so don't complain if their 574# behavior changes. 575.PHONY: prebuilt 576prebuilt: $(ALL_PREBUILT) 577 578# An internal target that depends on all copied headers 579# (see copy_headers.make). Other targets that need the 580# headers to be copied first can depend on this target. 581.PHONY: all_copied_headers 582all_copied_headers: ; 583 584$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 585 586# All the droid stuff, in directories 587.PHONY: files 588files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 589 590# ------------------------------------------------------------------- 591 592.PHONY: ramdisk 593ramdisk: $(INSTALLED_RAMDISK_TARGET) 594 595.PHONY: systemtarball 596systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 597 598.PHONY: userdataimage 599userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 600 601.PHONY: userdatatarball 602userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 603 604.PHONY: bootimage 605bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 606 607ifeq ($(BUILD_TINY_ANDROID), true) 608INSTALLED_RECOVERYIMAGE_TARGET := 609endif 610 611# Build files and then package it into the rom formats 612.PHONY: droidcore 613droidcore: files \ 614 systemimage \ 615 $(INSTALLED_BOOTIMAGE_TARGET) \ 616 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 617 $(INSTALLED_USERDATAIMAGE_TARGET) \ 618 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 619 $(INSTALLED_FILES_FILE) 620 621# The actual files built by the droidcore target changes depending 622# on the build variant. 623.PHONY: droid tests 624droid tests: droidcore 625 626$(call dist-for-goals, droid, \ 627 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 628 $(INTERNAL_OTA_PACKAGE_TARGET) \ 629 $(SYMBOLS_ZIP) \ 630 $(APPS_ZIP) \ 631 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 632 $(PACKAGE_STATS_FILE) \ 633 $(INSTALLED_FILES_FILE) \ 634 $(INSTALLED_BUILD_PROP_TARGET) \ 635 $(BUILT_TARGET_FILES_PACKAGE) \ 636 ) 637 638# Tests are installed in userdata.img. If we're building the tests 639# variant, copy it for "make tests dist". Also copy a zip of the 640# contents of userdata.img, so that people can easily extract a 641# single .apk. 642ifeq ($(TARGET_BUILD_VARIANT),tests) 643$(call dist-for-goals, droid, \ 644 $(INSTALLED_USERDATAIMAGE_TARGET) \ 645 $(BUILT_TESTS_ZIP_PACKAGE) \ 646 ) 647endif 648 649.PHONY: docs 650docs: $(ALL_DOCS) 651 652.PHONY: sdk 653ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 654sdk: $(ALL_SDK_TARGETS) 655$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 656 657.PHONY: findbugs 658findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 659 660.PHONY: clean 661dirs_to_clean := \ 662 $(PRODUCT_OUT) \ 663 $(TARGET_COMMON_OUT_ROOT) \ 664 $(HOST_OUT) \ 665 $(HOST_COMMON_OUT_ROOT) 666clean: 667 @for dir in $(dirs_to_clean) ; do \ 668 echo "Cleaning $$dir..."; \ 669 rm -rf $$dir; \ 670 done 671 @echo "Clean."; \ 672 673.PHONY: clobber 674clobber: 675 @rm -rf $(OUT_DIR) 676 @echo "Entire build directory removed." 677 678# The rules for dataclean and installclean are defined in cleanbuild.mk. 679 680#xxx scrape this from ALL_MODULE_NAME_TAGS 681.PHONY: modules 682modules: 683 @echo "Available sub-modules:" 684 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 685 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 686 687.PHONY: showcommands 688showcommands: 689 @echo >/dev/null 690 691