main.mk revision a779a05e7eecf91d33590787075a8cbef4c270ac
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128is_sdk_build := 129ifneq ($(filter sdk,$(MAKECMDGOALS)),) 130is_sdk_build := true 131endif 132ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 133is_sdk_build := true 134endif 135 136 137## user/userdebug ## 138 139user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 140enable_target_debugging := true 141ifneq (,$(user_variant)) 142 # Target is secure in user builds. 143 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 144 145 tags_to_install := user 146 ifeq ($(user_variant),userdebug) 147 # Pick up some extra useful tools 148 tags_to_install += debug 149 else 150 # Disable debugging in plain user builds. 151 enable_target_debugging := 152 endif 153 154 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 155 # Also, remove the corresponding block in config/product_config.make. 156 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 157 WITH_DEXPREOPT := true 158 endif 159 160 # Disallow mock locations by default for user builds 161 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 162 163else # !user_variant 164 # Turn on checkjni for non-user builds. 165 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 166 # Set device insecure for non-user builds. 167 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 168 # Allow mock locations by default for non user builds 169 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 170endif # !user_variant 171 172ifeq (true,$(strip $(enable_target_debugging))) 173 # Target is more debuggable and adbd is on by default 174 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 175 # Include the debugging/testing OTA keys in this build. 176 INCLUDE_TEST_OTA_KEYS := true 177else # !enable_target_debugging 178 # Target is less debuggable and adbd is off by default 179 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 180endif # !enable_target_debugging 181 182## eng ## 183 184ifeq ($(TARGET_BUILD_VARIANT),eng) 185tags_to_install := user debug eng 186 # Don't require the setup wizard on eng builds 187 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 188 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 189endif 190 191## tests ## 192 193ifeq ($(TARGET_BUILD_VARIANT),tests) 194tags_to_install := user debug eng tests 195endif 196 197## sdk ## 198 199ifdef is_sdk_build 200ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 201$(error The 'sdk' target may not be specified with any other targets) 202endif 203# TODO: this should be eng I think. Since the sdk is built from the eng 204# variant. 205tags_to_install := user debug eng 206ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 207ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 208else # !sdk 209# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 210ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 211endif 212 213## precise GC ## 214 215ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 216 # Enabling type-precise GC results in larger optimized DEX files. The 217 # additional storage requirements for ".odex" files can cause /system 218 # to overflow on some devices, so this is configured separately for 219 # each product. 220 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 221endif 222 223# Install an apns-conf.xml file if one's not already being installed. 224ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 225 PRODUCT_COPY_FILES += \ 226 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 227 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 228 $(warning implicitly installing apns-conf_sdk.xml) 229 endif 230endif 231# If we're on an eng or tests build, but not on the sdk, and we have 232# a better one, use that instead. 233ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 234 ifdef is_sdk_build 235 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 236 ifneq ($(strip $(apns_to_use)),) 237 PRODUCT_COPY_FILES := \ 238 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 239 $(strip $(apns_to_use)):system/etc/apns-conf.xml 240 endif 241 endif 242endif 243 244ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 245 246# enable vm tracing in files for now to help track 247# the cause of ANRs in the content process 248ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 249 250 251# ------------------------------------------------------------ 252# Define a function that, given a list of module tags, returns 253# non-empty if that module should be installed in /system. 254 255# For most goals, anything not tagged with the "tests" tag should 256# be installed in /system. 257define should-install-to-system 258$(if $(filter tests,$(1)),,true) 259endef 260 261ifdef is_sdk_build 262# For the sdk goal, anything with the "samples" tag should be 263# installed in /data even if that module also has "eng"/"debug"/"user". 264define should-install-to-system 265$(if $(filter samples tests,$(1)),,true) 266endef 267endif 268 269 270# If all they typed was make showcommands, we'll actually build 271# the default target. 272ifeq ($(MAKECMDGOALS),showcommands) 273.PHONY: showcommands 274showcommands: $(DEFAULT_GOAL) 275endif 276 277# These targets are going to delete stuff, don't bother including 278# the whole directory tree if that's all we're going to do 279ifeq ($(MAKECMDGOALS),clean) 280dont_bother := true 281endif 282ifeq ($(MAKECMDGOALS),clobber) 283dont_bother := true 284endif 285ifeq ($(MAKECMDGOALS),dataclean) 286dont_bother := true 287endif 288ifeq ($(MAKECMDGOALS),installclean) 289dont_bother := true 290endif 291 292# Bring in all modules that need to be built. 293ifneq ($(dont_bother),true) 294 295subdir_makefiles := 296 297ifeq ($(HOST_OS),windows) 298SDK_ONLY := true 299endif 300ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 301SDK_ONLY := true 302endif 303 304ifeq ($(SDK_ONLY),true) 305 306subdirs := \ 307 prebuilt \ 308 build/libs/host \ 309 dalvik/dexdump \ 310 dalvik/libdex \ 311 dalvik/tools/dmtracedump \ 312 dalvik/tools/hprof-conv \ 313 development/emulator/mksdcard \ 314 development/tools/activitycreator \ 315 development/tools/line_endings \ 316 development/host \ 317 external/expat \ 318 external/libpng \ 319 external/qemu \ 320 external/sqlite/dist \ 321 external/zlib \ 322 frameworks/base/libs/utils \ 323 frameworks/base/tools/aapt \ 324 frameworks/base/tools/aidl \ 325 system/core/adb \ 326 system/core/fastboot \ 327 system/core/libcutils \ 328 system/core/liblog \ 329 system/core/libzipfile 330 331# The following can only be built if "javac" is available. 332# This check is used when building parts of the SDK under Cygwin. 333ifneq (,$(shell which javac 2>/dev/null)) 334$(warning sdk-only: javac available.) 335subdirs += \ 336 build/tools/signapk \ 337 build/tools/zipalign \ 338 dalvik/dx \ 339 dalvik/libcore \ 340 development/apps \ 341 development/tools/androidprefs \ 342 development/tools/apkbuilder \ 343 development/tools/jarutils \ 344 development/tools/layoutlib_utils \ 345 development/tools/ninepatch \ 346 development/tools/sdkstats \ 347 development/tools/sdkmanager \ 348 development/tools/mkstubs \ 349 frameworks/base \ 350 frameworks/base/tools/layoutlib \ 351 external/googleclient \ 352 packages 353else 354$(warning sdk-only: javac not available.) 355endif 356 357# Exclude tools/acp when cross-compiling windows under linux 358ifeq ($(findstring Linux,$(UNAME)),) 359subdirs += build/tools/acp 360endif 361 362else # !SDK_ONLY 363ifeq ($(BUILD_TINY_ANDROID), true) 364 365# TINY_ANDROID is a super-minimal build configuration, handy for board 366# bringup and very low level debugging 367 368INTERNAL_DEFAULT_DOCS_TARGETS := 369 370subdirs := \ 371 bionic \ 372 system/core \ 373 build/libs \ 374 build/target \ 375 build/tools/acp \ 376 build/tools/apriori \ 377 build/tools/kcm \ 378 build/tools/soslim \ 379 external/elfcopy \ 380 external/elfutils \ 381 external/yaffs2 \ 382 external/zlib 383else # !BUILD_TINY_ANDROID 384 385# 386# Typical build; include any Android.mk files we can find. 387# 388INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 389subdirs := $(TOP) 390 391FULL_BUILD := true 392 393endif # !BUILD_TINY_ANDROID 394 395endif # !SDK_ONLY 396 397# Can't use first-makefiles-under here because 398# --mindepth=2 makes the prunes not work. 399subdir_makefiles += \ 400 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 401 402# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 403# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 404# make sure only one exists. 405# Real boards should always be associated with an OEM vendor. 406board_config_mk := \ 407 $(strip $(wildcard \ 408 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 409 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 410 )) 411ifeq ($(board_config_mk),) 412 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 413endif 414ifneq ($(words $(board_config_mk)),1) 415 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 416endif 417include $(board_config_mk) 418TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 419board_config_mk := 420 421# Clean up/verify variables defined by the board config file. 422TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 423 424# 425# Include all of the makefiles in the system 426# 427 428ifneq ($(ONE_SHOT_MAKEFILE),) 429# We've probably been invoked by the "mm" shell function 430# with a subdirectory's makefile. 431include $(ONE_SHOT_MAKEFILE) 432# Change CUSTOM_MODULES to include only modules that were 433# defined by this makefile; this will install all of those 434# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 435# so that the modules will be installed in the same place they 436# would have been with a normal make. 437CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 438FULL_BUILD := 439INTERNAL_DEFAULT_DOCS_TARGETS := 440# Stub out the notice targets, which probably aren't defined 441# when using ONE_SHOT_MAKEFILE. 442NOTICE-HOST-%: ; 443NOTICE-TARGET-%: ; 444else 445include $(subdir_makefiles) 446endif 447# ------------------------------------------------------------------- 448# All module makefiles have been included at this point. 449# ------------------------------------------------------------------- 450 451# ------------------------------------------------------------------- 452# Include any makefiles that must happen after the module makefiles 453# have been included. 454# TODO: have these files register themselves via a global var rather 455# than hard-coding the list here. 456ifdef FULL_BUILD 457 # Only include this during a full build, otherwise we can't be 458 # guaranteed that any policies were included. 459 -include frameworks/policies/base/PolicyConfig.mk 460endif 461 462# ------------------------------------------------------------------- 463# Fix up CUSTOM_MODULES to refer to installed files rather than 464# just bare module names. Leave unknown modules alone in case 465# they're actually full paths to a particular file. 466known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 467unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 468CUSTOM_MODULES := \ 469 $(call module-installed-files,$(known_custom_modules)) \ 470 $(unknown_custom_modules) 471 472# ------------------------------------------------------------------- 473# Define dependencies for modules that require other modules. 474# This can only happen now, after we've read in all module makefiles. 475# 476# TODO: deal with the fact that a bare module name isn't 477# unambiguous enough. Maybe declare short targets like 478# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 479# BUG: the system image won't know to depend on modules that are 480# brought in as requirements of other modules. 481define add-required-deps 482$(1): $(2) 483endef 484$(foreach m,$(ALL_MODULES), \ 485 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 486 $(if $(r), \ 487 $(eval r := $(call module-installed-files,$(r))) \ 488 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 489 ) \ 490 ) 491m := 492r := 493add-required-deps := 494 495# ------------------------------------------------------------------- 496# Figure out our module sets. 497 498# Of the modules defined by the component makefiles, 499# determine what we actually want to build. 500# If a module has the "restricted" tag on it, it 501# poisons the rest of the tags and shouldn't appear 502# on any list. 503Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 504 $(ALL_BUILT_MODULES) \ 505 $(CUSTOM_MODULES)) 506# TODO: Remove the 3 places in the tree that use 507# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 508 509ifdef FULL_BUILD 510 # The base list of modules to build for this product is specified 511 # by the appropriate product definition file, which was included 512 # by product_config.make. 513 user_PACKAGES := $(call module-installed-files, \ 514 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 515 ifeq (0,1) 516 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 517 $(foreach p,$(user_PACKAGES),$(info : $(p))) 518 $(error done) 519 endif 520else 521 # We're not doing a full build, and are probably only including 522 # a subset of the module makefiles. Don't try to build any modules 523 # requested by the product, because we probably won't have rules 524 # to build them. 525 user_PACKAGES := 526endif 527# Use tags to get the non-APPS user modules. Use the product 528# definition files to get the APPS user modules. 529user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 530user_MODULES := $(user_MODULES) $(user_PACKAGES) 531 532eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 533debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 534tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 535 536ifeq ($(strip $(tags_to_install)),) 537$(error ASSERTION FAILED: tags_to_install should not be empty) 538endif 539modules_to_install := $(sort $(Default_MODULES) \ 540 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 541 542# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 543# Filter out (do not install) any overridden packages. 544overridden_packages := $(call get-package-overrides,$(modules_to_install)) 545ifdef overridden_packages 546# old_modules_to_install := $(modules_to_install) 547 modules_to_install := \ 548 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 549 $(modules_to_install)) 550endif 551#$(error filtered out 552# $(filter-out $(modules_to_install),$(old_modules_to_install))) 553 554# Don't include any GNU targets in the SDK. It's ok (and necessary) 555# to build the host tools, but nothing that's going to be installed 556# on the target (including static libraries). 557ifdef is_sdk_build 558 target_gnu_MODULES := \ 559 $(filter \ 560 $(TARGET_OUT_INTERMEDIATES)/% \ 561 $(TARGET_OUT)/% \ 562 $(TARGET_OUT_DATA)/%, \ 563 $(sort $(call get-tagged-modules,gnu))) 564 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 565 modules_to_install := \ 566 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 567endif 568 569 570# config/Makefile contains extra stuff that we don't want to pollute this 571# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 572# contains everything that's built during the current make, but it also further 573# extends ALL_DEFAULT_INSTALLED_MODULES. 574ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 575include $(BUILD_SYSTEM)/Makefile 576modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 577ALL_DEFAULT_INSTALLED_MODULES := 578 579endif # dont_bother 580 581# ------------------------------------------------------------------- 582# This is used to to get the ordering right, you can also use these, 583# but they're considered undocumented, so don't complain if their 584# behavior changes. 585.PHONY: prebuilt 586prebuilt: $(ALL_PREBUILT) 587 588# An internal target that depends on all copied headers 589# (see copy_headers.make). Other targets that need the 590# headers to be copied first can depend on this target. 591.PHONY: all_copied_headers 592all_copied_headers: ; 593 594$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 595 596# All the droid stuff, in directories 597.PHONY: files 598files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 599 600# ------------------------------------------------------------------- 601 602.PHONY: ramdisk 603ramdisk: $(INSTALLED_RAMDISK_TARGET) 604 605.PHONY: systemtarball 606systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 607 608.PHONY: userdataimage 609userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 610 611.PHONY: userdatatarball 612userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 613 614.PHONY: bootimage 615bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 616 617ifeq ($(BUILD_TINY_ANDROID), true) 618INSTALLED_RECOVERYIMAGE_TARGET := 619endif 620 621# Build files and then package it into the rom formats 622.PHONY: droidcore 623droidcore: files \ 624 systemimage \ 625 $(INSTALLED_BOOTIMAGE_TARGET) \ 626 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 627 $(INSTALLED_USERDATAIMAGE_TARGET) \ 628 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 629 $(INSTALLED_FILES_FILE) 630 631# The actual files built by the droidcore target changes depending 632# on the build variant. 633.PHONY: droid tests 634droid tests: droidcore 635 636$(call dist-for-goals, droid, \ 637 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 638 $(INTERNAL_OTA_PACKAGE_TARGET) \ 639 $(SYMBOLS_ZIP) \ 640 $(APPS_ZIP) \ 641 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 642 $(PACKAGE_STATS_FILE) \ 643 $(INSTALLED_FILES_FILE) \ 644 $(INSTALLED_BUILD_PROP_TARGET) \ 645 $(BUILT_TARGET_FILES_PACKAGE) \ 646 ) 647 648# Tests are installed in userdata.img. If we're building the tests 649# variant, copy it for "make tests dist". Also copy a zip of the 650# contents of userdata.img, so that people can easily extract a 651# single .apk. 652ifeq ($(TARGET_BUILD_VARIANT),tests) 653$(call dist-for-goals, droid, \ 654 $(INSTALLED_USERDATAIMAGE_TARGET) \ 655 $(BUILT_TESTS_ZIP_PACKAGE) \ 656 ) 657endif 658 659.PHONY: docs 660docs: $(ALL_DOCS) 661 662.PHONY: sdk 663ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 664sdk: $(ALL_SDK_TARGETS) 665$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 666 667.PHONY: findbugs 668findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 669 670.PHONY: clean 671dirs_to_clean := \ 672 $(PRODUCT_OUT) \ 673 $(TARGET_COMMON_OUT_ROOT) \ 674 $(HOST_OUT) \ 675 $(HOST_COMMON_OUT_ROOT) 676clean: 677 @for dir in $(dirs_to_clean) ; do \ 678 echo "Cleaning $$dir..."; \ 679 rm -rf $$dir; \ 680 done 681 @echo "Clean."; \ 682 683.PHONY: clobber 684clobber: 685 @rm -rf $(OUT_DIR) 686 @echo "Entire build directory removed." 687 688# The rules for dataclean and installclean are defined in cleanbuild.mk. 689 690#xxx scrape this from ALL_MODULE_NAME_TAGS 691.PHONY: modules 692modules: 693 @echo "Available sub-modules:" 694 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 695 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 696 697.PHONY: showcommands 698showcommands: 699 @echo >/dev/null 700 701